Add 2.6.27 support to rb532, nand is not recognized, needs to be sorted out

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13224 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 files changed, 1523 insertions, 0 deletions

diff --git a/target/linux/rb532/config-2.6.27 b/target/linux/rb532/config-2.6.27
new file mode 100644
index 0000000000..8fd10702d9
--- /dev/null
+++ b/target/linux/rb532/config-2.6.27
@@ -0,0 +1,244 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_8139TOO is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATM is not set
+# CONFIG_AX25 is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+CONFIG_BITREVERSE=y
+CONFIG_BOOT_RAW=y
+# CONFIG_BT is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CLASSIC_RCU=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CSRC_R4K=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_BT8XX is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_CLK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I2C is not set
+# CONFIG_IDE is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_KEXEC=y
+CONFIG_KMOD=y
+CONFIG_KORINA=y
+# CONFIG_LEDS_ALIX is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_TMIO is not set
+CONFIG_MIKROTIK_RB532=y
+CONFIG_MINI_FO=m
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MISDN is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_START=0x8000000
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NET_SCH_ESFQ_NFCT is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CT_ACCT=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_RB532=y
+# CONFIG_PATA_SCH is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_R6040 is not set
+CONFIG_RC32434_WDT=y
+CONFIG_RFKILL_LEDS=y
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI=y
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOUND is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+# CONFIG_TC35815 is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_TICK_ONESHOT is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_VGASTATE is not set
+CONFIG_VIA_RHINE=y
+# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/rb532/patches-2.6.27/001-git_diffs.patch b/target/linux/rb532/patches-2.6.27/001-git_diffs.patch
new file mode 100644
index 0000000000..d6c244b294
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/001-git_diffs.patch
@@ -0,0 +1,743 @@
+diff -urN a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
+--- a/arch/mips/rb532/devices.c	2008-11-07 18:55:34.000000000 +0100
++++ b/arch/mips/rb532/devices.c	2008-11-15 17:43:28.000000000 +0100
+@@ -34,21 +34,11 @@
+ #include <asm/mach-rc32434/rb.h>
+ #include <asm/mach-rc32434/integ.h>
+ #include <asm/mach-rc32434/gpio.h>
+-
+-#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
+-#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
+-#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
+-#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
++#include <asm/mach-rc32434/irq.h>
+ 
+ #define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
+ #define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+ 
+-/* NAND definitions */
+-#define GPIO_RDY (1 << 0x08)
+-#define GPIO_WPX (1 << 0x09)
+-#define GPIO_ALE (1 << 0x0a)
+-#define GPIO_CLE (1 << 0x0b)
+-
+ static struct resource korina_dev0_res[] = {
+ 	{
+ 		.name = "korina_regs",
+@@ -94,15 +84,13 @@
+ };
+ 
+ static struct platform_device korina_dev0 = {
+-	.id = 0,
++	.id = -1,
+ 	.name = "korina",
+ 	.dev.platform_data = &korina_dev0_data,
+ 	.resource = korina_dev0_res,
+ 	.num_resources = ARRAY_SIZE(korina_dev0_res),
+ };
+ 
+-#define CF_GPIO_NUM 13
+-
+ static struct resource cf_slot0_res[] = {
+ 	{
+ 		.name = "cf_membase",
+@@ -116,11 +104,11 @@
+ };
+ 
+ static struct cf_device cf_slot0_data = {
+-	.gpio_pin = 13
++	.gpio_pin = CF_GPIO_NUM
+ };
+ 
+ static struct platform_device cf_slot0 = {
+-	.id = 0,
++	.id = -1,
+ 	.name = "pata-rb532-cf",
+ 	.dev.platform_data = &cf_slot0_data,
+ 	.resource = cf_slot0_res,
+@@ -130,7 +118,7 @@
+ /* Resources and device for NAND */
+ static int rb532_dev_ready(struct mtd_info *mtd)
+ {
+-	return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
++	return gpio_get_value(GPIO_RDY);
+ }
+ 
+ static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+@@ -185,7 +173,7 @@
+ 
+ static struct platform_device rb532_led = {
+ 	.name = "rb532-led",
+-	.id = 0,
++	.id = -1,
+ };
+ 
+ static struct gpio_keys_button rb532_gpio_btn[] = {
+@@ -292,7 +280,7 @@
+ {
+ 	/* Look for the CF card reader */
+ 	if (!readl(IDT434_REG_BASE + DEV1MASK))
+-		rb532_devs[1] = NULL;
++		rb532_devs[2] = NULL;	/* disable cf_slot0 at index 2 */
+ 	else {
+ 		cf_slot0_res[0].start =
+ 		    readl(IDT434_REG_BASE + DEV1BASE);
+diff -urN a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
+--- a/arch/mips/rb532/gpio.c	2008-11-07 18:55:34.000000000 +0100
++++ b/arch/mips/rb532/gpio.c	2008-11-15 17:43:28.000000000 +0100
+@@ -27,28 +27,27 @@
+  */
+ 
+ #include <linux/kernel.h>
+-#include <linux/gpio.h>
+ #include <linux/init.h>
+ #include <linux/types.h>
+-#include <linux/pci.h>
+ #include <linux/spinlock.h>
+-#include <linux/io.h>
+ #include <linux/platform_device.h>
+-
+-#include <asm/addrspace.h>
++#include <linux/gpio.h>
+ 
+ #include <asm/mach-rc32434/rb.h>
++#include <asm/mach-rc32434/gpio.h>
+ 
+-struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
+-EXPORT_SYMBOL(rb532_gpio_reg0);
++struct rb532_gpio_chip {
++	struct gpio_chip chip;
++	void __iomem	 *regbase;
++};
+ 
+ struct mpmc_device dev3;
+ 
+ static struct resource rb532_gpio_reg0_res[] = {
+ 	{
+ 		.name 	= "gpio_reg0",
+-		.start 	= (u32)(IDT434_REG_BASE + GPIOBASE),
+-		.end 	= (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
++		.start 	= REGBASE + GPIOBASE,
++		.end 	= REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
+ 		.flags 	= IORESOURCE_MEM,
+ 	}
+ };
+@@ -56,8 +55,8 @@
+ static struct resource rb532_dev3_ctl_res[] = {
+ 	{
+ 		.name	= "dev3_ctl",
+-		.start	= (u32)(IDT434_REG_BASE + DEV3BASE),
+-		.end	= (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
++		.start	= REGBASE + DEV3BASE,
++		.end	= REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
+ 		.flags	= IORESOURCE_MEM,
+ 	}
+ };
+@@ -70,7 +69,7 @@
+ 
+ 	spin_lock_irqsave(&dev3.lock, flags);
+ 
+-	data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
++	data = readl(IDT434_REG_BASE + reg_offs);
+ 	for (i = 0; i != len; ++i) {
+ 		if (val & (1 << i))
+ 			data |= (1 << (i + bit));
+@@ -108,114 +107,166 @@
+ }
+ EXPORT_SYMBOL(get_latch_u5);
+ 
+-int rb532_gpio_get_value(unsigned gpio)
++/* rb532_set_bit - sanely set a bit
++ *
++ * bitval: new value for the bit
++ * offset: bit index in the 4 byte address range
++ * ioaddr: 4 byte aligned address being altered
++ */
++static inline void rb532_set_bit(unsigned bitval,
++		unsigned offset, void __iomem *ioaddr)
+ {
+-	return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
+-}
+-EXPORT_SYMBOL(rb532_gpio_get_value);
++	unsigned long flags;
++	u32 val;
+ 
+-void rb532_gpio_set_value(unsigned gpio, int value)
+-{
+-	unsigned tmp;
++	bitval = !!bitval;              /* map parameter to {0,1} */
++
++	local_irq_save(flags);
+ 
+-	tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
+-	if (value)
+-		tmp |= 1 << gpio;
++	val = readl(ioaddr);
++	val &= ~( ~bitval << offset );   /* unset bit if bitval == 0 */
++	val |=  (  bitval << offset );   /* set bit if bitval == 1 */
++	writel(val, ioaddr);
+ 
+-	writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
++	local_irq_restore(flags);
+ }
+-EXPORT_SYMBOL(rb532_gpio_set_value);
+ 
+-int rb532_gpio_direction_input(unsigned gpio)
++/* rb532_get_bit - read a bit
++ *
++ * returns the boolean state of the bit, which may be > 1
++ */
++static inline int rb532_get_bit(unsigned offset, void __iomem *ioaddr)
+ {
+-	writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
+-	       (void *)&rb532_gpio_reg0->gpiocfg);
+-
+-	return 0;
++	return (readl(ioaddr) & (1 << offset));
+ }
+-EXPORT_SYMBOL(rb532_gpio_direction_input);
+ 
+-int rb532_gpio_direction_output(unsigned gpio, int value)
++/*
++ * Return GPIO level */
++static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
+ {
+-	gpio_set_value(gpio, value);
+-	writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
+-	       (void *)&rb532_gpio_reg0->gpiocfg);
++	struct rb532_gpio_chip	*gpch;
+ 
+-	return 0;
++	gpch = container_of(chip, struct rb532_gpio_chip, chip);
++	return rb532_get_bit(offset, gpch->regbase + GPIOD);
+ }
+-EXPORT_SYMBOL(rb532_gpio_direction_output);
+ 
+-void rb532_gpio_set_int_level(unsigned gpio, int value)
++/*
++ * Set output GPIO level
++ */
++static void rb532_gpio_set(struct gpio_chip *chip,
++				unsigned offset, int value)
+ {
+-	unsigned tmp;
++	struct rb532_gpio_chip	*gpch;
+ 
+-	tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
+-	if (value)
+-		tmp |= 1 << gpio;
+-	writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
++	gpch = container_of(chip, struct rb532_gpio_chip, chip);
++	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
+ }
+-EXPORT_SYMBOL(rb532_gpio_set_int_level);
+ 
+-int rb532_gpio_get_int_level(unsigned gpio)
++/*
++ * Set GPIO direction to input
++ */
++static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+ {
+-	return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
++	struct rb532_gpio_chip	*gpch;
++
++	gpch = container_of(chip, struct rb532_gpio_chip, chip);
++
++	if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
++		return 1;	/* alternate function, GPIOCFG is ignored */
++
++	rb532_set_bit(0, offset, gpch->regbase + GPIOCFG);
++	return 0;
+ }
+-EXPORT_SYMBOL(rb532_gpio_get_int_level);
+ 
+-void rb532_gpio_set_int_status(unsigned gpio, int value)
++/*
++ * Set GPIO direction to output
++ */
++static int rb532_gpio_direction_output(struct gpio_chip *chip,
++					unsigned offset, int value)
+ {
+-	unsigned tmp;
++	struct rb532_gpio_chip	*gpch;
++
++	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ 
+-	tmp = readl(&rb532_gpio_reg0->gpioistat);
+-	if (value)
+-		tmp |= 1 << gpio;
+-	writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
++	if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
++		return 1;	/* alternate function, GPIOCFG is ignored */
++
++	/* set the initial output value */
++	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
++
++	rb532_set_bit(1, offset, gpch->regbase + GPIOCFG);
++	return 0;
+ }
+-EXPORT_SYMBOL(rb532_gpio_set_int_status);
+ 
+-int rb532_gpio_get_int_status(unsigned gpio)
++static struct rb532_gpio_chip rb532_gpio_chip[] = {
++	[0] = {
++		.chip = {
++			.label			= "gpio0",
++			.direction_input	= rb532_gpio_direction_input,
++			.direction_output	= rb532_gpio_direction_output,
++			.get			= rb532_gpio_get,
++			.set			= rb532_gpio_set,
++			.base			= 0,
++			.ngpio			= 32,
++		},
++	},
++};
++
++/*
++ * Set GPIO interrupt level
++ */
++void rb532_gpio_set_ilevel(int bit, unsigned gpio)
+ {
+-	return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
++	rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOILEVEL);
+ }
+-EXPORT_SYMBOL(rb532_gpio_get_int_status);
++EXPORT_SYMBOL(rb532_gpio_set_ilevel);
+ 
+-void rb532_gpio_set_func(unsigned gpio, int value)
++/*
++ * Set GPIO interrupt status
++ */
++void rb532_gpio_set_istat(int bit, unsigned gpio)
+ {
+-	unsigned tmp;
+-
+-	tmp = readl(&rb532_gpio_reg0->gpiofunc);
+-	if (value)
+-		tmp |= 1 << gpio;
+-	writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
++	rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOISTAT);
+ }
+-EXPORT_SYMBOL(rb532_gpio_set_func);
++EXPORT_SYMBOL(rb532_gpio_set_istat);
+ 
+-int rb532_gpio_get_func(unsigned gpio)
++/*
++ * Configure GPIO alternate function
++ */
++static void rb532_gpio_set_func(int bit, unsigned gpio)
+ {
+-	return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
++       rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
+ }
+-EXPORT_SYMBOL(rb532_gpio_get_func);
+ 
+ int __init rb532_gpio_init(void)
+ {
+-	rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
+-				rb532_gpio_reg0_res[0].end -
+-				rb532_gpio_reg0_res[0].start);
++	struct resource *r;
++
++	r = rb532_gpio_reg0_res;
++	rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start);
+ 
+-	if (!rb532_gpio_reg0) {
++	if (!rb532_gpio_chip->regbase) {
+ 		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
+ 		return -ENXIO;
+ 	}
+ 
+-	dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
+-				rb532_dev3_ctl_res[0].end -
+-				rb532_dev3_ctl_res[0].start);
++	/* Register our GPIO chip */
++	gpiochip_add(&rb532_gpio_chip->chip);
++
++	r = rb532_dev3_ctl_res;
++	dev3.base = ioremap_nocache(r->start, r->end - r->start);
+ 
+ 	if (!dev3.base) {
+ 		printk(KERN_ERR "rb532: cannot remap device controller 3\n");
+ 		return -ENXIO;
+ 	}
+ 
++	/* configure CF_GPIO_NUM as CFRDY IRQ source */
++	rb532_gpio_set_func(0, CF_GPIO_NUM);
++	rb532_gpio_direction_input(&rb532_gpio_chip->chip, CF_GPIO_NUM);
++	rb532_gpio_set_ilevel(1, CF_GPIO_NUM);
++	rb532_gpio_set_istat(0, CF_GPIO_NUM);
++
+ 	return 0;
+ }
+ arch_initcall(rb532_gpio_init);
+diff -urN a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
+--- a/arch/mips/rb532/irq.c	2008-11-07 18:55:34.000000000 +0100
++++ b/arch/mips/rb532/irq.c	2008-11-15 17:43:28.000000000 +0100
+@@ -45,7 +45,7 @@
+ #include <asm/mipsregs.h>
+ #include <asm/system.h>
+ 
+-#include <asm/mach-rc32434/rc32434.h>
++#include <asm/mach-rc32434/irq.h>
+ 
+ struct intr_group {
+ 	u32 mask;	/* mask of valid bits in pending/mask registers */
+diff -urN a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
+--- a/arch/mips/rb532/prom.c	2008-11-07 18:55:34.000000000 +0100
++++ b/arch/mips/rb532/prom.c	2008-11-15 17:43:28.000000000 +0100
+@@ -37,12 +37,8 @@
+ #include <asm/mach-rc32434/ddr.h>
+ #include <asm/mach-rc32434/prom.h>
+ 
+-extern void __init setup_serial_port(void);
+-
+ unsigned int idt_cpu_freq = 132000000;
+ EXPORT_SYMBOL(idt_cpu_freq);
+-unsigned int gpio_bootup_state;
+-EXPORT_SYMBOL(gpio_bootup_state);
+ 
+ static struct resource ddr_reg[] = {
+ 	{
+@@ -108,9 +104,6 @@
+ 				mips_machtype = MACH_MIKROTIK_RB532;
+ 		}
+ 
+-		if (match_tag(prom_argv[i], GPIO_TAG))
+-			gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
+-
+ 		strcpy(cp, prom_argv[i]);
+ 		cp += strlen(prom_argv[i]);
+ 	}
+@@ -122,11 +115,6 @@
+ 		strcpy(cp, arcs_cmdline);
+ 		cp += strlen(arcs_cmdline);
+ 	}
+-	if (gpio_bootup_state & 0x02)
+-		strcpy(cp, GPIO_INIT_NOBUTTON);
+-	else
+-		strcpy(cp, GPIO_INIT_BUTTON);
+-
+ 	cmd_line[CL_SIZE-1] = '\0';
+ 
+ 	strcpy(arcs_cmdline, cmd_line);
+diff -urN a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
+--- a/arch/mips/rb532/serial.c	2008-11-07 18:55:34.000000000 +0100
++++ b/arch/mips/rb532/serial.c	2008-11-15 17:43:28.000000000 +0100
+@@ -31,16 +31,16 @@
+ #include <linux/serial_8250.h>
+ 
+ #include <asm/serial.h>
+-#include <asm/mach-rc32434/rc32434.h>
++#include <asm/mach-rc32434/rb.h>
+ 
+ extern unsigned int idt_cpu_freq;
+ 
+ static struct uart_port rb532_uart = {
+ 	.type = PORT_16550A,
+ 	.line = 0,
+-	.irq = RC32434_UART0_IRQ,
++	.irq = UART0_IRQ,
+ 	.iotype = UPIO_MEM,
+-	.membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
++	.membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
+ 	.regshift = 2
+ };
+ 
+diff -urN a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
+--- a/arch/mips/rb532/setup.c	2008-11-07 18:55:34.000000000 +0100
++++ b/arch/mips/rb532/setup.c	2008-11-15 17:43:28.000000000 +0100
+@@ -9,7 +9,7 @@
+ #include <asm/time.h>
+ #include <linux/ioport.h>
+ 
+-#include <asm/mach-rc32434/rc32434.h>
++#include <asm/mach-rc32434/rb.h>
+ #include <asm/mach-rc32434/pci.h>
+ 
+ struct pci_reg __iomem *pci_reg;
+@@ -27,7 +27,7 @@
+ static void rb_machine_restart(char *command)
+ {
+ 	/* just jump to the reset vector */
+-	writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
++	writel(0x80000001, IDT434_REG_BASE + RST);
+ 	((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
+ }
+ 
+diff -urN a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
+--- a/arch/mips/rb532/time.c	2008-11-07 18:55:34.000000000 +0100
++++ b/arch/mips/rb532/time.c	2008-11-15 17:43:28.000000000 +0100
+@@ -28,7 +28,6 @@
+ #include <linux/timex.h>
+ 
+ #include <asm/mipsregs.h>
+-#include <asm/debug.h>
+ #include <asm/time.h>
+ #include <asm/mach-rc32434/rc32434.h>
+ 
+diff -urN linux-2.6.27.5/arch/mips/Kconfig linux-2.6.27.5.new/arch/mips/Kconfig
+--- linux-2.6.27.5/arch/mips/Kconfig	2008-11-07 18:55:34.000000000 +0100
++++ linux-2.6.27.5.new/arch/mips/Kconfig	2008-11-15 17:50:42.000000000 +0100
+@@ -568,7 +568,7 @@
+ 	select SYS_SUPPORTS_LITTLE_ENDIAN
+ 	select SWAP_IO_SPACE
+ 	select BOOT_RAW
+-	select GENERIC_GPIO
++	select ARCH_REQUIRE_GPIOLIB
+ 	help
+ 	  Support the Mikrotik(tm) RouterBoard 532 series,
+ 	  based on the IDT RC32434 SoC.
+diff -urN a/include/asm-mips/mach-rc32434/gpio.h b/include-mips/asm/mach-rc32434/gpio.h
+--- a/include/asm-mips/mach-rc32434/gpio.h	2008-11-07 18:55:34.000000000 +0100
++++ b/include/asm-mips/mach-rc32434/gpio.h	2008-11-15 17:43:28.000000000 +0100
+@@ -14,6 +14,16 @@
+ #define _RC32434_GPIO_H_
+ 
+ #include <linux/types.h>
++#include <asm-generic/gpio.h>
++
++#define NR_BUILTIN_GPIO		32
++
++#define gpio_get_value	__gpio_get_value
++#define gpio_set_value	__gpio_set_value
++#define gpio_cansleep	__gpio_cansleep
++
++#define gpio_to_irq(gpio)	(8 + 4 * 32 + gpio)
++#define irq_to_gpio(irq)	(irq - (8 + 4 * 32))
+ 
+ struct rb532_gpio_reg {
+ 	u32   gpiofunc;   /* GPIO Function Register
+@@ -61,66 +71,20 @@
+ /* PCI messaging unit */
+ #define RC32434_PCI_MSU_GPIO	(1 << 13)
+ 
++/* NAND GPIO signals */
++#define GPIO_RDY		8
++#define GPIO_WPX	9
++#define GPIO_ALE		10
++#define GPIO_CLE		11
++
++/* Compact Flash GPIO pin */
++#define CF_GPIO_NUM		13
+ 
+ extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val);
+ extern unsigned get_434_reg(unsigned reg_offs);
+ extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
+ extern unsigned char get_latch_u5(void);
+-
+-extern int rb532_gpio_get_value(unsigned gpio);
+-extern void rb532_gpio_set_value(unsigned gpio, int value);
+-extern int rb532_gpio_direction_input(unsigned gpio);
+-extern int rb532_gpio_direction_output(unsigned gpio, int value);
+-extern void rb532_gpio_set_int_level(unsigned gpio, int value);
+-extern int rb532_gpio_get_int_level(unsigned gpio);
+-extern void rb532_gpio_set_int_status(unsigned gpio, int value);
+-extern int rb532_gpio_get_int_status(unsigned gpio);
+-
+-
+-/* Wrappers for the arch-neutral GPIO API */
+-
+-static inline int gpio_request(unsigned gpio, const char *label)
+-{
+-	/* Not yet implemented */
+-	return 0;
+-}
+-
+-static inline void gpio_free(unsigned gpio)
+-{
+-	/* Not yet implemented */
+-}
+-
+-static inline int gpio_direction_input(unsigned gpio)
+-{
+-	return rb532_gpio_direction_input(gpio);
+-}
+-
+-static inline int gpio_direction_output(unsigned gpio, int value)
+-{
+-	return rb532_gpio_direction_output(gpio, value);
+-}
+-
+-static inline int gpio_get_value(unsigned gpio)
+-{
+-	return rb532_gpio_get_value(gpio);
+-}
+-
+-static inline void gpio_set_value(unsigned gpio, int value)
+-{
+-	rb532_gpio_set_value(gpio, value);
+-}
+-
+-static inline int gpio_to_irq(unsigned gpio)
+-{
+-	return gpio;
+-}
+-
+-static inline int irq_to_gpio(unsigned irq)
+-{
+-	return irq;
+-}
+-
+-/* For cansleep */
+-#include <asm-generic/gpio.h>
++extern void rb532_gpio_set_ilevel(int bit, unsigned gpio);
++extern void rb532_gpio_set_istat(int bit, unsigned gpio);
+ 
+ #endif /* _RC32434_GPIO_H_ */
+diff -urN a/include/asm-mips/mach-rc32434/irq.h b/include/asm-mips/mach-rc32434/irq.h
+--- a/include/asm-mips/mach-rc32434/irq.h	2008-11-07 18:55:34.000000000 +0100
++++ b/include/asm-mips/mach-rc32434/irq.h	2008-11-15 17:43:28.000000000 +0100
+@@ -4,5 +4,30 @@
+ #define NR_IRQS	256
+ 
+ #include <asm/mach-generic/irq.h>
++#include <asm/mach-rc32434/rb.h>
++
++/* Interrupt Controller */
++#define IC_GROUP0_PEND		(REGBASE + 0x38000)
++#define IC_GROUP0_MASK		(REGBASE + 0x38008)
++#define IC_GROUP_OFFSET		0x0C
++
++#define NUM_INTR_GROUPS		5
++
++/* 16550 UARTs */
++#define GROUP0_IRQ_BASE		8	/* GRP2 IRQ numbers start here */
++					/* GRP3 IRQ numbers start here */
++#define GROUP1_IRQ_BASE		(GROUP0_IRQ_BASE + 32)
++					/* GRP4 IRQ numbers start here */
++#define GROUP2_IRQ_BASE		(GROUP1_IRQ_BASE + 32)
++					/* GRP5 IRQ numbers start here */
++#define GROUP3_IRQ_BASE		(GROUP2_IRQ_BASE + 32)
++#define GROUP4_IRQ_BASE		(GROUP3_IRQ_BASE + 32)
++
++#define UART0_IRQ		(GROUP3_IRQ_BASE + 0)
++
++#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
++#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
++#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
++#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
+ 
+ #endif  /* __ASM_RC32434_IRQ_H */
+diff -urN a/include/asm-mips/mach-rc32434/prom.h b/include/asm-mips/mach-rc32434/prom.h
+--- a/include/asm-mips/mach-rc32434/prom.h	2008-11-07 18:55:34.000000000 +0100
++++ b/include/asm-mips/mach-rc32434/prom.h	2008-11-15 17:43:28.000000000 +0100
+@@ -28,14 +28,10 @@
+ 
+ #define PROM_ENTRY(x)		(0xbfc00000 + ((x) * 8))
+ 
+-#define GPIO_INIT_NOBUTTON	""
+-#define GPIO_INIT_BUTTON	" 2"
+-
+ #define SR_NMI			0x00180000
+ #define SERIAL_SPEED_ENTRY	0x00000001
+ 
+ #define FREQ_TAG		"HZ="
+-#define GPIO_TAG		"gpio="
+ #define KMAC_TAG		"kmac="
+ #define MEM_TAG			"mem="
+ #define BOARD_TAG		"board="
+diff -urN a/include/asm-mips/mach-rc32434/rb.h b/include/asm-mips/mach-rc32434/rb.h
+--- a/include/asm-mips/mach-rc32434/rb.h	2008-11-07 18:55:34.000000000 +0100
++++ b/include/asm-mips/mach-rc32434/rb.h	2008-11-15 17:43:28.000000000 +0100
+@@ -17,7 +17,10 @@
+ 
+ #include <linux/genhd.h>
+ 
+-#define IDT434_REG_BASE	((volatile void *) KSEG1ADDR(0x18000000))
++#define REGBASE		0x18000000
++#define IDT434_REG_BASE	((volatile void *) KSEG1ADDR(REGBASE))
++#define UART0BASE	0x58000
++#define RST		(1 << 15)
+ #define DEV0BASE	0x010000
+ #define DEV0MASK	0x010004
+ #define DEV0C		0x010008
+@@ -37,12 +40,14 @@
+ #define BTCS		0x010040
+ #define BTCOMPARE	0x010044
+ #define GPIOBASE	0x050000
+-#define GPIOCFG		0x050004
+-#define GPIOD		0x050008
+-#define GPIOILEVEL	0x05000C
+-#define GPIOISTAT	0x050010
+-#define GPIONMIEN	0x050014
+-#define IMASK6		0x038038
++/* Offsets relative to GPIOBASE */
++#define GPIOFUNC	0x00
++#define GPIOCFG		0x04
++#define GPIOD		0x08
++#define GPIOILEVEL	0x0C
++#define GPIOISTAT	0x10
++#define GPIONMIEN	0x14
++#define IMASK6		0x38
+ #define LO_WPX		(1 << 0)
+ #define LO_ALE		(1 << 1)
+ #define LO_CLE		(1 << 2)
+diff -urN a/include/asm-mips/mach-rc32434/rc32434.h b/include/asm-mips/mach-rc32434/rc32434.h
+--- a/include/asm-mips/mach-rc32434/rc32434.h	2008-11-07 18:55:34.000000000 +0100
++++ b/include/asm-mips/mach-rc32434/rc32434.h	2008-11-15 17:43:28.000000000 +0100
+@@ -8,37 +8,7 @@
+ #include <linux/delay.h>
+ #include <linux/io.h>
+ 
+-#define RC32434_REG_BASE	0x18000000
+-#define RC32434_RST		(1 << 15)
+-
+ #define IDT_CLOCK_MULT		2
+-#define MIPS_CPU_TIMER_IRQ	7
+-
+-/* Interrupt Controller */
+-#define IC_GROUP0_PEND		(RC32434_REG_BASE + 0x38000)
+-#define IC_GROUP0_MASK		(RC32434_REG_BASE + 0x38008)
+-#define IC_GROUP_OFFSET		0x0C
+-
+-#define NUM_INTR_GROUPS		5
+-
+-/* 16550 UARTs */
+-#define GROUP0_IRQ_BASE		8	/* GRP2 IRQ numbers start here */
+-					/* GRP3 IRQ numbers start here */
+-#define GROUP1_IRQ_BASE		(GROUP0_IRQ_BASE + 32)
+-					/* GRP4 IRQ numbers start here */
+-#define GROUP2_IRQ_BASE		(GROUP1_IRQ_BASE + 32)
+-					/* GRP5 IRQ numbers start here */
+-#define GROUP3_IRQ_BASE		(GROUP2_IRQ_BASE + 32)
+-#define GROUP4_IRQ_BASE		(GROUP3_IRQ_BASE + 32)
+-
+-
+-#ifdef __MIPSEB__
+-#define RC32434_UART0_BASE	(RC32434_REG_BASE + 0x58003)
+-#else
+-#define RC32434_UART0_BASE	(RC32434_REG_BASE + 0x58000)
+-#endif
+-
+-#define RC32434_UART0_IRQ	(GROUP3_IRQ_BASE + 0)
+ 
+ /* cpu pipeline flush */
+ static inline void rc32434_sync(void)
+@@ -46,16 +16,4 @@
+ 	__asm__ volatile ("sync");
+ }
+ 
+-static inline void rc32434_sync_udelay(int us)
+-{
+-	__asm__ volatile ("sync");
+-	udelay(us);
+-}
+-
+-static inline void rc32434_sync_delay(int ms)
+-{
+-	__asm__ volatile ("sync");
+-	mdelay(ms);
+-}
+-
+ #endif  /* _ASM_RC32434_RC32434_H_ */
+--- a/arch/mips/pci/fixup-rc32434.c	2008-11-07 18:55:34.000000000 +0100
++++ b/arch/mips/pci/fixup-rc32434.c	2008-11-15 17:43:28.000000000 +0100
+@@ -30,6 +30,7 @@
+ #include <linux/init.h>
+ 
+ #include <asm/mach-rc32434/rc32434.h>
++#include <asm/mach-rc32434/irq.h>
+ 
+ static int __devinitdata irq_map[2][12] = {
+ 	{0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1},
diff --git a/target/linux/rb532/patches-2.6.27/002-pci_io_map_base.patch b/target/linux/rb532/patches-2.6.27/002-pci_io_map_base.patch
new file mode 100644
index 0000000000..5786803e47
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/002-pci_io_map_base.patch
@@ -0,0 +1,42 @@
+The code is rather based on trial-and-error than knowledge. Verified Via
+Rhine functionality in PIO as well as MMIO mode.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+Tested-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/pci/pci-rc32434.c |   11 +++++++++++
+ 1 files changed, 11 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
+index 1c2821e..71f7d27 100644
+--- a/arch/mips/pci/pci-rc32434.c
++++ b/arch/mips/pci/pci-rc32434.c
+@@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init(void)
+ 
+ static int __init rc32434_pci_init(void)
+ {
++	void __iomem *io_map_base;
++
+ 	pr_info("PCI: Initializing PCI\n");
+ 
+ 	ioport_resource.start = rc32434_res_pci_io1.start;
+@@ -212,6 +214,15 @@ static int __init rc32434_pci_init(void)
+ 
+ 	rc32434_pcibridge_init();
+ 
++	io_map_base = ioremap(rc32434_res_pci_io1.start,
++		rc32434_res_pci_io1.end - rc32434_res_pci_io1.start + 1);
++
++	if (!io_map_base)
++		return -ENOMEM;
++
++	rc32434_controller.io_map_base =
++		(unsigned long)io_map_base - rc32434_res_pci_io1.start;
++
+ 	register_pci_controller(&rc32434_controller);
+ 	rc32434_sync();
+ 
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/003-gpio_bit_setting.patch b/target/linux/rb532/patches-2.6.27/003-gpio_bit_setting.patch
new file mode 100644
index 0000000000..49f9f4b3b5
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/003-gpio_bit_setting.patch
@@ -0,0 +1,35 @@
+The algorithm works unconditionally. If bitval is one, the first line is
+a no op and the second line sets the bit at offset position. Vice versa,
+if bitval is zero, the first line clears the bit at offset position and
+the second line is a no op.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ arch/mips/rb532/gpio.c |    6 ++----
+ 1 files changed, 2 insertions(+), 4 deletions(-)
+
+diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
+index 0e84c8a..e35cb75 100644
+--- a/arch/mips/rb532/gpio.c
++++ b/arch/mips/rb532/gpio.c
+@@ -119,13 +119,11 @@ static inline void rb532_set_bit(unsigned bitval,
+ 	unsigned long flags;
+ 	u32 val;
+ 
+-	bitval = !!bitval;              /* map parameter to {0,1} */
+-
+ 	local_irq_save(flags);
+ 
+ 	val = readl(ioaddr);
+-	val &= ~( ~bitval << offset );   /* unset bit if bitval == 0 */
+-	val |=  (  bitval << offset );   /* set bit if bitval == 1 */
++	val &= ~(!bitval << offset);   /* unset bit if bitval == 0 */
++	val |= (!!bitval << offset);   /* set bit if bitval == 1 */
+ 	writel(val, ioaddr);
+ 
+ 	local_irq_restore(flags);
+-- 
+1.5.6.4
+
+
+
diff --git a/target/linux/rb532/patches-2.6.27/004-fix_pata_rb532_cf.patch b/target/linux/rb532/patches-2.6.27/004-fix_pata_rb532_cf.patch
new file mode 100644
index 0000000000..50dedefbe7
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/004-fix_pata_rb532_cf.patch
@@ -0,0 +1,84 @@
+After applying the following changes I could verify functionality by
+mounting a filesystem on the cfdisk and reading/writing files in it.
+
+The set_irq_type() function must be wrong, as there is no set_type()
+function defined for the rb532 IRQ chip. But as the used IRQ actually is
+being triggered by a GPIO, setting it's interrupt level should be the
+right alternative. Also to clear a GPIO triggered IRQ, the source has to
+be cleared. This is being done at the end of rb532_pata_irq_handler.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+Acked-by: Florian Fainelli <florian@openwrt.org>
+---
+ drivers/ata/pata_rb532_cf.c |   15 ++++++++++-----
+ 1 files changed, 10 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
+index f8b3ffc..7b11f40 100644
+--- a/drivers/ata/pata_rb532_cf.c
++++ b/drivers/ata/pata_rb532_cf.c
+@@ -31,6 +31,7 @@
+ #include <scsi/scsi_host.h>
+ 
+ #include <asm/gpio.h>
++#include <asm/mach-rc32434/gpio.h>
+ 
+ #define DRV_NAME	"pata-rb532-cf"
+ #define DRV_VERSION	"0.1.0"
+@@ -39,7 +40,8 @@
+ #define RB500_CF_MAXPORTS	1
+ #define RB500_CF_IO_DELAY	400
+ 
+-#define RB500_CF_REG_CMD	0x0800
++#define RB500_CF_REG_BASE	0x0800
++#define RB500_CF_REG_ERR	0x080D
+ #define RB500_CF_REG_CTRL	0x080E
+ #define RB500_CF_REG_DATA	0x0C00
+ 
+@@ -62,7 +64,7 @@ static inline void rb532_pata_finish_io(struct ata_port *ap)
+ 	ata_sff_dma_pause(ap);
+ 	ndelay(RB500_CF_IO_DELAY);
+ 
+-	set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
++	rb532_gpio_set_ilevel(1, info->gpio_line);
+ }
+ 
+ static void rb532_pata_exec_command(struct ata_port *ap,
+@@ -109,13 +111,15 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
+ 	struct rb532_cf_info *info = ah->private_data;
+ 
+ 	if (gpio_get_value(info->gpio_line)) {
+-		set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
++		rb532_gpio_set_ilevel(0, info->gpio_line);
+ 		if (!info->frozen)
+ 			ata_sff_interrupt(info->irq, dev_instance);
+ 	} else {
+-		set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
++		rb532_gpio_set_ilevel(1, info->gpio_line);
+ 	}
+ 
++	rb532_gpio_set_istat(0, info->gpio_line);
++
+ 	return IRQ_HANDLED;
+ }
+ 
+@@ -146,13 +150,14 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
+ 	ap->pio_mask	= 0x1f; /* PIO4 */
+ 	ap->flags	= ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
+ 
+-	ap->ioaddr.cmd_addr	= info->iobase + RB500_CF_REG_CMD;
++	ap->ioaddr.cmd_addr	= info->iobase + RB500_CF_REG_BASE;
+ 	ap->ioaddr.ctl_addr	= info->iobase + RB500_CF_REG_CTRL;
+ 	ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
+ 
+ 	ata_sff_std_ports(&ap->ioaddr);
+ 
+ 	ap->ioaddr.data_addr	= info->iobase + RB500_CF_REG_DATA;
++	ap->ioaddr.error_addr	= info->iobase + RB500_CF_REG_ERR;
+ }
+ 
+ static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/005-pata_rb532_cf_4bytes_rw.patch b/target/linux/rb532/patches-2.6.27/005-pata_rb532_cf_4bytes_rw.patch
new file mode 100644
index 0000000000..c8e682014c
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/005-pata_rb532_cf_4bytes_rw.patch
@@ -0,0 +1,68 @@
+* rename the offset definition to avoid abiguity with the standard ATA
+  IO address
+* read and write four bytes at once like the original driver does
+* use writesl() and readsl() which implicitly iterate over the data
+
+This patch assumes buflen to be a multiple of four, which is true for
+ATA devices. ATAPI support is not known, though unlikely, as the
+original driver always transfers 512 Bytes at once.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com>
+---
+ drivers/ata/pata_rb532_cf.c |   20 +++++++++-----------
+ 1 files changed, 9 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
+index 7b11f40..b919012 100644
+--- a/drivers/ata/pata_rb532_cf.c
++++ b/drivers/ata/pata_rb532_cf.c
+@@ -43,7 +43,8 @@
+ #define RB500_CF_REG_BASE	0x0800
+ #define RB500_CF_REG_ERR	0x080D
+ #define RB500_CF_REG_CTRL	0x080E
+-#define RB500_CF_REG_DATA	0x0C00
++/* 32bit buffered data register offset */
++#define RB500_CF_REG_DBUF32	0x0C00
+ 
+ struct rb532_cf_info {
+ 	void __iomem	*iobase;
+@@ -74,19 +75,16 @@ static void rb532_pata_exec_command(struct ata_port *ap,
+ 	rb532_pata_finish_io(ap);
+ }
+ 
+-static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
+-				unsigned int buflen, int write_data)
++static void rb532_pata_data_xfer(struct ata_device *adev,
++		unsigned char *buf, unsigned int buflen, int write_data)
+ {
+ 	struct ata_port *ap = adev->link->ap;
+ 	void __iomem *ioaddr = ap->ioaddr.data_addr;
+ 
+-	if (write_data) {
+-		for (; buflen > 0; buflen--, buf++)
+-			writeb(*buf, ioaddr);
+-	} else {
+-		for (; buflen > 0; buflen--, buf++)
+-			*buf = readb(ioaddr);
+-	}
++	if (write_data)
++		writesl(ioaddr, buf, buflen / sizeof(u32));
++	else
++		readsl(ioaddr, buf, buflen / sizeof(u32));
+ 
+ 	rb532_pata_finish_io(adev->link->ap);
+ }
+@@ -156,7 +154,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
+ 
+ 	ata_sff_std_ports(&ap->ioaddr);
+ 
+-	ap->ioaddr.data_addr	= info->iobase + RB500_CF_REG_DATA;
++	ap->ioaddr.data_addr	= info->iobase + RB500_CF_REG_DBUF32;
+ 	ap->ioaddr.error_addr	= info->iobase + RB500_CF_REG_ERR;
+ }
+ 
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/006-pata_rb532_cf_fix_prototype.patch b/target/linux/rb532/patches-2.6.27/006-pata_rb532_cf_fix_prototype.patch
new file mode 100644
index 0000000000..1a7cbd0ef3
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/006-pata_rb532_cf_fix_prototype.patch
@@ -0,0 +1,35 @@
+Per definition, this function should return the number of bytes
+consumed. Also take care of the unlikely case when buflen is not a
+multiple of four; while transferring, the division cuts the remaining
+bytes, so alter the return value accordingly.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/ata/pata_rb532_cf.c |    3 ++-
+ 1 files changed, 2 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
+index b919012..95a0d66 100644
+--- a/drivers/ata/pata_rb532_cf.c
++++ b/drivers/ata/pata_rb532_cf.c
+@@ -75,7 +75,7 @@ static void rb532_pata_exec_command(struct ata_port *ap,
+ 	rb532_pata_finish_io(ap);
+ }
+ 
+-static void rb532_pata_data_xfer(struct ata_device *adev,
++static unsigned int rb532_pata_data_xfer(struct ata_device *adev,
+ 		unsigned char *buf, unsigned int buflen, int write_data)
+ {
+ 	struct ata_port *ap = adev->link->ap;
+@@ -87,6 +87,7 @@ static void rb532_pata_data_xfer(struct ata_device *adev,
+ 		readsl(ioaddr, buf, buflen / sizeof(u32));
+ 
+ 	rb532_pata_finish_io(adev->link->ap);
++	return buflen - (buflen % sizeof(u32));
+ }
+ 
+ static void rb532_pata_freeze(struct ata_port *ap)
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/007-cmdline_hack.patch b/target/linux/rb532/patches-2.6.27/007-cmdline_hack.patch
new file mode 100644
index 0000000000..5f2ed2f2f0
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/007-cmdline_hack.patch
@@ -0,0 +1,15 @@
+diff -urN linux-2.6.27.5/arch/mips/kernel/head.S linux-2.6.27.5.new/arch/mips/kernel/head.S
+--- linux-2.6.27.5/arch/mips/kernel/head.S	2008-11-15 19:24:03.000000000 +0100
++++ linux-2.6.27.5.new/arch/mips/kernel/head.S	2008-11-15 19:24:55.000000000 +0100
+@@ -123,6 +123,11 @@
+ 
+ 	j kernel_entry
+ 	nop
++
++
++EXPORT(_image_cmdline)
++	.ascii "CMDLINE:"
++
+ #ifndef CONFIG_NO_EXCEPT_FILL
+ 	/*
+ 	 * Reserved space for exception handlers.
diff --git a/target/linux/rb532/patches-2.6.27/008-korina_fixes.patch b/target/linux/rb532/patches-2.6.27/008-korina_fixes.patch
new file mode 100644
index 0000000000..69483010bb
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/008-korina_fixes.patch
@@ -0,0 +1,245 @@
+--- linux-2.6.27.5/drivers/net/korina.c	2008-11-07 18:55:34.000000000 +0100
++++ ../build_dir/linux-rb532/linux-2.6.27.5/drivers/net/korina.c	2008-11-16 00:38:19.000000000 +0100
+@@ -327,12 +327,11 @@
+ 
+ 	dmas = readl(&lp->rx_dma_regs->dmas);
+ 	if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
+-		netif_rx_schedule_prep(dev, &lp->napi);
+-
+ 		dmasm = readl(&lp->rx_dma_regs->dmasm);
+ 		writel(dmasm | (DMA_STAT_DONE |
+ 				DMA_STAT_HALT | DMA_STAT_ERR),
+ 				&lp->rx_dma_regs->dmasm);
++		netif_rx_schedule(dev, &lp->napi);
+ 
+ 		if (dmas & DMA_STAT_ERR)
+ 			printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
+@@ -350,14 +349,24 @@
+ 	struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
+ 	struct sk_buff *skb, *skb_new;
+ 	u8 *pkt_buf;
+-	u32 devcs, pkt_len, dmas, rx_free_desc;
++	u32 devcs, pkt_len, dmas, pktuncrc_len;
+ 	int count;
+ 
+ 	dma_cache_inv((u32)rd, sizeof(*rd));
+ 
+ 	for (count = 0; count < limit; count++) {
+-
++		skb_new = NULL;
+ 		devcs = rd->devcs;
++		pkt_len = RCVPKT_LENGTH(devcs);
++		skb = lp->rx_skb[lp->rx_next_done];
++		
++		if ((devcs & ETH_RX_LD) != ETH_RX_LD) {
++			/* check that this is a whole packet
++			 * WARNING: DMA_FD bit incorrectly set
++			 * in Rc32434 (errata ref #077) */
++			dev->stats.rx_errors++;
++			dev->stats.rx_dropped++;
++		}
+ 
+ 		/* Update statistics counters */
+ 		if (devcs & ETH_RX_CRC)
+@@ -375,75 +384,79 @@
+ 		if (devcs & ETH_RX_MP)
+ 			dev->stats.multicast++;
+ 
+-		if ((devcs & ETH_RX_LD) != ETH_RX_LD) {
+-			/* check that this is a whole packet
+-			 * WARNING: DMA_FD bit incorrectly set
+-			 * in Rc32434 (errata ref #077) */
+-			dev->stats.rx_errors++;
+-			dev->stats.rx_dropped++;
+-		}
+-
+-		while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
+-			/* init the var. used for the later
+-			 * operations within the while loop */
+-			skb_new = NULL;
+-			pkt_len = RCVPKT_LENGTH(devcs);
+-			skb = lp->rx_skb[lp->rx_next_done];
+-
+-			if ((devcs & ETH_RX_ROK)) {
+-				/* must be the (first and) last
+-				 * descriptor then */
+-				pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
++		else if ((devcs & ETH_RX_ROK)) {
++			/* must be the (first and) last
++			 * descriptor then */
++			pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
++			pktuncrc_len = pkt_len - 4;
+ 
+-				/* invalidate the cache */
+-				dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
++			/* invalidate the cache */
++			dma_cache_inv((unsigned long)pkt_buf, pktuncrc_len);
+ 
+-				/* Malloc up new buffer. */
+-				skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
++			/* Malloc up new buffer. */
++			skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+ 
+-				if (!skb_new)
+-					break;
++			if (skb_new) {
+ 				/* Do not count the CRC */
+-				skb_put(skb, pkt_len - 4);
++				skb_put(skb, pktuncrc_len);
+ 				skb->protocol = eth_type_trans(skb, dev);
+ 
+ 				/* Pass the packet to upper layers */
+ 				netif_receive_skb(skb);
++				
+ 				dev->last_rx = jiffies;
+ 				dev->stats.rx_packets++;
+-				dev->stats.rx_bytes += pkt_len;
+-
+-				/* Update the mcast stats */
+-				if (devcs & ETH_RX_MP)
+-					dev->stats.multicast++;
+-
++				dev->stats.rx_bytes += pktuncrc_len;
++				
+ 				lp->rx_skb[lp->rx_next_done] = skb_new;
++			} else {
++				dev->stats.rx_errors++;
++				dev->stats.rx_dropped++;
+ 			}
++		} else {
++			dev->stats.rx_errors++;
++			dev->stats.rx_dropped++;
++			
++			/* Update statistics counters */
++			if (devcs & ETH_RX_CRC)
++				dev->stats.rx_crc_errors++;
++			else if (devcs & ETH_RX_LOR)
++				dev->stats.rx_length_errors++;
++			else if (devcs & ETH_RX_LE)
++				dev->stats.rx_length_errors++;
++			else if (devcs & ETH_RX_OVR)
++				dev->stats.rx_over_errors++;
++			else if (devcs & ETH_RX_CV)
++				dev->stats.rx_frame_errors++;
++			else if (devcs & ETH_RX_CES)
++				dev->stats.rx_length_errors++;
++			else if (devcs & ETH_RX_MP)
++				dev->stats.multicast++;
++		}
+ 
+-			rd->devcs = 0;
++		rd->devcs = 0;
+ 
+-			/* Restore descriptor's curr_addr */
+-			if (skb_new)
+-				rd->ca = CPHYSADDR(skb_new->data);
+-			else
+-				rd->ca = CPHYSADDR(skb->data);
++		/* Restore descriptor's curr_addr */
++		if (skb_new)
++			rd->ca = CPHYSADDR(skb_new->data);
++		else
++			rd->ca = CPHYSADDR(skb->data);
+ 
+-			rd->control = DMA_COUNT(KORINA_RBSIZE) |
++		rd->control = DMA_COUNT(KORINA_RBSIZE) |
+ 				DMA_DESC_COD | DMA_DESC_IOD;
+-			lp->rd_ring[(lp->rx_next_done - 1) &
+-				KORINA_RDS_MASK].control &=
+-				~DMA_DESC_COD;
+-
+-			lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
+-			dma_cache_wback((u32)rd, sizeof(*rd));
+-			rd = &lp->rd_ring[lp->rx_next_done];
+-			writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
+-		}
++		lp->rd_ring[(lp->rx_next_done - 1) &
++			KORINA_RDS_MASK].control &= ~DMA_DESC_COD;
++
++		lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
++		dma_cache_wback((u32)rd, sizeof(*rd));
++		rd = &lp->rd_ring[lp->rx_next_done];
++		writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
+ 	}
+ 
+ 	dmas = readl(&lp->rx_dma_regs->dmas);
+ 
+ 	if (dmas & DMA_STAT_HALT) {
++		/* Mask off halt and errors bits */
+ 		writel(~(DMA_STAT_HALT | DMA_STAT_ERR),
+ 				&lp->rx_dma_regs->dmas);
+ 
+@@ -469,8 +482,9 @@
+ 	if (work_done < budget) {
+ 		netif_rx_complete(dev, napi);
+ 
++		/* Mask off interrupts */
+ 		writel(readl(&lp->rx_dma_regs->dmasm) &
+-			~(DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR),
++			(DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR),
+ 			&lp->rx_dma_regs->dmasm);
+ 	}
+ 	return work_done;
+@@ -534,10 +548,11 @@
+ {
+ 	struct korina_private *lp = netdev_priv(dev);
+ 	struct dma_desc *td = &lp->td_ring[lp->tx_next_done];
++	unsigned long flags;
+ 	u32 devcs;
+ 	u32 dmas;
+ 
+-	spin_lock(&lp->lock);
++	spin_lock_irqsave(&lp->lock, flags);
+ 
+ 	/* Process all desc that are done */
+ 	while (IS_DMA_FINISHED(td->control)) {
+@@ -610,7 +625,7 @@
+ 			~(DMA_STAT_FINI | DMA_STAT_ERR),
+ 			&lp->tx_dma_regs->dmasm);
+ 
+-	spin_unlock(&lp->lock);
++	spin_unlock_irqrestore(&lp->lock, flags);
+ }
+ 
+ static irqreturn_t
+@@ -624,11 +639,10 @@
+ 	dmas = readl(&lp->tx_dma_regs->dmas);
+ 
+ 	if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
+-		korina_tx(dev);
+-
+ 		dmasm = readl(&lp->tx_dma_regs->dmasm);
+ 		writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
+ 				&lp->tx_dma_regs->dmasm);
++		korina_tx(dev);
+ 
+ 		if (lp->tx_chain_status == desc_filled &&
+ 			(readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
+@@ -1078,11 +1092,18 @@
+ 
+ static int korina_probe(struct platform_device *pdev)
+ {
+-	struct korina_device *bif = platform_get_drvdata(pdev);
++	struct korina_device *bif;
+ 	struct korina_private *lp;
+ 	struct net_device *dev;
+ 	struct resource *r;
+ 	int rc;
++	DECLARE_MAC_BUF(mac);
++
++	bif = (struct korina_device *)pdev->dev.platform_data;
++	if (!bif) {
++		printk(KERN_ERR DRV_NAME ": missing platform_data\n");
++		return -ENODEV;
++	}
+ 
+ 	dev = alloc_etherdev(sizeof(struct korina_private));
+ 	if (!dev) {
+@@ -1172,6 +1193,7 @@
+ 			": cannot register net device %d\n", rc);
+ 		goto probe_err_register;
+ 	}
++	printk(KERN_INFO DRV_NAME ": registered %s, IRQ %d MAC %s\n", dev->name, dev->irq, print_mac(mac, dev->dev_addr));
+ out:
+ 	return rc;
+ 
diff --git a/target/linux/rb532/patches-2.6.27/009-rc32434_res_name.patch b/target/linux/rb532/patches-2.6.27/009-rc32434_res_name.patch
new file mode 100644
index 0000000000..e61ec8330a
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/009-rc32434_res_name.patch
@@ -0,0 +1,12 @@
+diff -urN linux-2.6.27.5/drivers/watchdog/rc32434_wdt.c linux-2.6.27.5.new/drivers/watchdog/rc32434_wdt.c
+--- linux-2.6.27.5/drivers/watchdog/rc32434_wdt.c	2008-11-07 18:55:34.000000000 +0100
++++ linux-2.6.27.5.new/drivers/watchdog/rc32434_wdt.c	2008-11-15 22:06:28.000000000 +0100
+@@ -261,7 +261,7 @@
+ 	int ret;
+ 	struct resource *r;
+ 
+-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
++	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
+ 	if (!r) {
+ 		printk(KERN_ERR KBUILD_MODNAME
+ 			"failed to retrieve resources\n");