sunxi: driver refresh for 3.13

 - update gmac / mmc / usb / ahci drivers to follow mainline dev trees
 - add driver for spi
 - update clock support
 - update a31 support
 - move to new DT compats where appropriate
 - re-order patchqueue where needed
 - verified working a20 smp
 - move most DTSes off files/
 - update defconfig

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39782 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 108 insertions, 0 deletions

diff --git a/target/linux/sunxi/patches-3.13/132-dt-sun5i-a13-add-olinuxino-micro.patch b/target/linux/sunxi/patches-3.13/132-dt-sun5i-a13-add-olinuxino-micro.patch
new file mode 100644
index 0000000000..93b72523ca
--- /dev/null
+++ b/target/linux/sunxi/patches-3.13/132-dt-sun5i-a13-add-olinuxino-micro.patch
@@ -0,0 +1,108 @@
+From aad62992a2921436ec7c054f8b80bc916b8cc9d7 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Sat, 14 Dec 2013 16:26:17 +0100
+Subject: [PATCH] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board
+
+The A13-OLinuXino-MICRO is a small dev-board with the Allwinner A13 SoC:
+https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino-MICRO/
+
+Features:
+A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
+256 MB RAM (128Mbit x 16)
+5VDC input power supply with own ICs, noise immune design
+1 USB host
+1 USB OTG which can power the board
+SD-card connector for booting the Linux image
+VGA video output
+LCD signals available on connector so you still can use LCD if you disable VGA/HDMI
+Audio output
+Microphone input pads (no connector)
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/boot/dts/Makefile                      |  1 +
+ arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 68 +++++++++++++++++++++++++
+ 2 files changed, 69 insertions(+)
+ create mode 100644 arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -255,6 +255,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
+ 	sun4i-a10-hackberry.dtb \
+ 	sun5i-a10s-olinuxino-micro.dtb \
+ 	sun5i-a13-olinuxino.dtb \
++	sun5i-a13-olinuxino-micro.dtb \
+ 	sun6i-a31-colombus.dtb \
+ 	sun7i-a20-cubieboard2.dtb \
+ 	sun7i-a20-cubietruck.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+@@ -0,0 +1,68 @@
++/*
++ * Copyright 2012 Maxime Ripard
++ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
++ *
++ * Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++/include/ "sun5i-a13.dtsi"
++
++/ {
++	model = "Olimex A13-Olinuxino Micro";
++	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
++
++	soc@01c00000 {
++		pinctrl@01c20800 {
++			led_pins_olinuxinom: led_pins@0 {
++				allwinner,pins = "PG9";
++				allwinner,function = "gpio_out";
++				allwinner,drive = <1>;
++				allwinner,pull = <0>;
++			};
++		};
++
++		uart1: serial@01c28400 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&uart1_pins_b>;
++			status = "okay";
++		};
++
++		i2c0: i2c@01c2ac00 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&i2c0_pins_a>;
++			status = "okay";
++		};
++
++		i2c1: i2c@01c2b000 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&i2c1_pins_a>;
++			status = "okay";
++		};
++
++		i2c2: i2c@01c2b400 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&i2c2_pins_a>;
++			status = "okay";
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&led_pins_olinuxinom>;
++
++		power {
++			label = "a13-olinuxino-micro:green:power";
++			gpios = <&pio 6 9 0>;
++			default-state = "on";
++		};
++	};
++};