nuke obsolete kernel stuff

SVN-Revision: 14875

1 files changed, 0 insertions, 510 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.26/1049-bq27000-battery-driver.patch.patch b/target/linux/s3c24xx/patches-2.6.26/1049-bq27000-battery-driver.patch.patch
deleted file mode 100755
index 9e7ae116d3..0000000000
--- a/target/linux/s3c24xx/patches-2.6.26/1049-bq27000-battery-driver.patch.patch
+++ /dev/null
@@ -1,510 +0,0 @@
-From 2bab304b10f077cb88d5b5f5bd7e50c16aac2132 Mon Sep 17 00:00:00 2001
-From: mokopatches <mokopatches@openmoko.org>
-Date: Fri, 25 Jul 2008 22:21:23 +0100
-Subject: [PATCH] bq27000-battery-driver.patch
-
----
- arch/arm/mach-s3c2440/Kconfig      |    2 +
- arch/arm/mach-s3c2440/mach-gta02.c |   21 ++
- drivers/power/Kconfig              |    7 +-
- drivers/power/Makefile             |    1 +
- drivers/power/bq27000_battery.c    |  375 ++++++++++++++++++++++++++++++++++++
- include/linux/bq27000_battery.h    |   12 ++
- 6 files changed, 417 insertions(+), 1 deletions(-)
- create mode 100644 drivers/power/bq27000_battery.c
- create mode 100644 include/linux/bq27000_battery.h
-
-diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
-index 3015aaf..b417f8e 100644
---- a/arch/arm/mach-s3c2440/Kconfig
-+++ b/arch/arm/mach-s3c2440/Kconfig
-@@ -79,6 +79,8 @@ config MACH_NEO1973_GTA02
- 	bool "FIC Neo1973 GSM Phone (GTA02 Hardware)"
- 	select CPU_S3C2442
- 	select SENSORS_PCF50633
-+	select POWER_SUPPLY
-+	select GTA02_HDQ
- 	help
- 	   Say Y here if you are using the FIC Neo1973 GSM Phone
- 
-diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
-index cea76e7..3816ea5 100644
---- a/arch/arm/mach-s3c2440/mach-gta02.c
-+++ b/arch/arm/mach-s3c2440/mach-gta02.c
-@@ -81,6 +81,8 @@
- 
- #include <asm/arch/fiq_ipc_gta02.h>
- #include "fiq_c_isr.h"
-+#include <linux/gta02_hdq.h>
-+#include <linux/bq27000_battery.h>
- 
- /* arbitrates which sensor IRQ owns the shared SPI bus */
- static spinlock_t motion_irq_lock;
-@@ -583,6 +585,24 @@ struct platform_device gta02_hdq_device = {
- };
- #endif
- 
-+/* BQ27000 Battery */
-+
-+struct bq27000_platform_data bq27000_pdata = {
-+	.name = "bat",
-+	.rsense_mohms = 20,
-+	.hdq_read = gta02hdq_read,
-+	.hdq_write = gta02hdq_write,
-+	.hdq_initialized = gta02hdq_initialized,
-+};
-+
-+struct platform_device bq27000_battery_device = {
-+	.name 		= "bq27000-battery",
-+	.dev = {
-+		.platform_data = &bq27000_pdata,
-+	},
-+};
-+
-+
- /* NOR Flash */
- 
- #define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
-@@ -1271,6 +1291,7 @@ static void __init gta02_machine_init(void)
- 	case GTA02v5_SYSTEM_REV:
- 	case GTA02v6_SYSTEM_REV:
- 		platform_device_register(&gta02_hdq_device);
-+		platform_device_register(&bq27000_battery_device);
- 		break;
- 	default:
- 		break;
-diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
-index 0a4515d..feb8b0a 100644
---- a/drivers/power/Kconfig
-+++ b/drivers/power/Kconfig
-@@ -49,7 +49,10 @@ config BATTERY_OLPC
- 	help
- 	  Say Y to enable support for the battery on the OLPC laptop.
- 
--endif # POWER_SUPPLY
-+config BATTERY_BQ27000_HDQ
-+	tristate "BQ27000 HDQ battery monitor driver"
-+	help
-+	  Say Y to enable support for the battery on the Neo Freerunner
- 
- config GTA02_HDQ
- 	tristate "Neo Freerunner HDQ"
-@@ -58,3 +61,5 @@ config GTA02_HDQ
- 	  Say Y to enable support for communicating with an HDQ battery
- 	  on the Neo Freerunner.  You probably want to select
- 	  at least BATTERY_BQ27000_HDQ as well
-+
-+endif # POWER_SUPPLY
-diff --git a/drivers/power/Makefile b/drivers/power/Makefile
-index 88f227f..d7e87ad 100644
---- a/drivers/power/Makefile
-+++ b/drivers/power/Makefile
-@@ -20,5 +20,6 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
- obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
- obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
- obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
-+obj-$(CONFIG_BATTERY_BQ27000_HDQ)	+= bq27000_battery.o
- 
- obj-$(CONFIG_GTA02_HDQ)		+= gta02_hdq.o
-diff --git a/drivers/power/bq27000_battery.c b/drivers/power/bq27000_battery.c
-new file mode 100644
-index 0000000..d19186a
---- /dev/null
-+++ b/drivers/power/bq27000_battery.c
-@@ -0,0 +1,375 @@
-+/*
-+ * Driver for batteries with bq27000 chips inside via HDQ
-+ *
-+ * Copyright 2008 Openmoko, Inc
-+ * Andy Green <andy@openmoko.com>
-+ *
-+ * based on ds2760 driver, original copyright notice for that --->
-+ *
-+ * Copyright © 2007 Anton Vorontsov
-+ *	       2004-2007 Matt Reimer
-+ *	       2004 Szabolcs Gyurko
-+ *
-+ * Use consistent with the GNU GPL is permitted,
-+ * provided that this copyright notice is
-+ * preserved in its entirety in all copies and derived works.
-+ *
-+ * Author:  Anton Vorontsov <cbou@mail.ru>
-+ *	    February 2007
-+ *
-+ *	    Matt Reimer <mreimer@vpop.net>
-+ *	    April 2004, 2005, 2007
-+ *
-+ *	    Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
-+ *	    September 2004
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/param.h>
-+#include <linux/jiffies.h>
-+#include <linux/delay.h>
-+#include <linux/pm.h>
-+#include <linux/platform_device.h>
-+#include <linux/power_supply.h>
-+#include <linux/bq27000_battery.h>
-+
-+enum bq27000_regs {
-+	/* RAM regs */
-+		/* read-write after this */
-+	BQ27000_CTRL = 0, /* Device Control Register */
-+	BQ27000_MODE, /* Device Mode Register */
-+	BQ27000_AR_L, /* At-Rate H L */
-+	BQ27000_AR_H,
-+		/* read-only after this */
-+	BQ27000_ARTTE_L, /* At-Rate Time To Empty H L */
-+	BQ27000_ARTTE_H,
-+	BQ27000_TEMP_L, /* Reported Temperature H L */
-+	BQ27000_TEMP_H,
-+	BQ27000_VOLT_L, /* Reported Voltage H L */
-+	BQ27000_VOLT_H,
-+	BQ27000_FLAGS, /* Status Flags */
-+	BQ27000_RSOC, /* Relative State of Charge */
-+	BQ27000_NAC_L, /* Nominal Available Capacity H L */
-+	BQ27000_NAC_H,
-+	BQ27000_CACD_L, /* Discharge Compensated H L */
-+	BQ27000_CACD_H,
-+	BQ27000_CACT_L, /* Temperature Compensated H L */
-+	BQ27000_CACT_H,
-+	BQ27000_LMD_L, /* Last measured discharge H L */
-+	BQ27000_LMD_H,
-+	BQ27000_AI_L, /* Average Current H L */
-+	BQ27000_AI_H,
-+	BQ27000_TTE_L, /* Time to Empty H L */
-+	BQ27000_TTE_H,
-+	BQ27000_TTF_L, /* Time to Full H L */
-+	BQ27000_TTF_H,
-+	BQ27000_SI_L, /* Standby Current H L */
-+	BQ27000_SI_H,
-+	BQ27000_STTE_L, /* Standby Time To Empty H L */
-+	BQ27000_STTE_H,
-+	BQ27000_MLI_L, /* Max Load Current H L */
-+	BQ27000_MLI_H,
-+	BQ27000_MLTTE_L, /* Max Load Time To Empty H L */
-+	BQ27000_MLTTE_H,
-+	BQ27000_SAE_L, /* Available Energy H L */
-+	BQ27000_SAE_H,
-+	BQ27000_AP_L, /* Available Power H L */
-+	BQ27000_AP_H,
-+	BQ27000_TTECP_L, /* Time to Empty at Constant Power H L */
-+	BQ27000_TTECP_H,
-+	BQ27000_CYCL_L, /* Cycle count since learning cycle H L */
-+	BQ27000_CYCL_H,
-+	BQ27000_CYCT_L, /* Cycle Count Total H L */
-+	BQ27000_CYCT_H,
-+	BQ27000_CSOC, /* Compensated State Of Charge */
-+	/* EEPROM regs */
-+		/* read-write after this */
-+	BQ27000_EE_EE_EN = 0x6e, /* EEPROM Program Enable */
-+	BQ27000_EE_ILMD = 0x76, /* Initial Last Measured Discharge High Byte */
-+	BQ27000_EE_SEDVF, /* Scaled EDVF Threshold */
-+	BQ27000_EE_SEDV1, /* Scaled EDV1 Threshold */
-+	BQ27000_EE_ISLC, /* Initial Standby Load Current */
-+	BQ27000_EE_DMFSD, /* Digital Magnitude Filter and Self Discharge */
-+	BQ27000_EE_TAPER, /* Aging Estimate Enable, Charge Termination Taper */
-+	BQ27000_EE_PKCFG, /* Pack Configuration Values */
-+	BQ27000_EE_IMLC, /* Initial Max Load Current or ID #3 */
-+	BQ27000_EE_DCOMP, /* Discharge rate compensation constants or ID #2 */
-+	BQ27000_EE_TCOMP, /* Temperature Compensation constants or ID #1 */
-+};
-+
-+enum bq27000_status_flags {
-+	BQ27000_STATUS_CHGS = 0x80, /* 1 = being charged */
-+	BQ27000_STATUS_NOACT = 0x40, /* 1 = no activity */
-+	BQ27000_STATUS_IMIN = 0x20, /* 1 = Lion taper current mode */
-+	BQ27000_STATUS_CI = 0x10, /* 1 = capacity likely  innacurate */
-+	BQ27000_STATUS_CALIP = 0x08, /* 1 = calibration in progress */
-+	BQ27000_STATUS_VDQ = 0x04, /* 1 = capacity should be accurate */
-+	BQ27000_STATUS_EDV1 = 0x02, /* 1 = end of discharge.. <6% left */
-+	BQ27000_STATUS_EDVF = 0x01, /* 1 = no, it's really empty now */
-+};
-+
-+#define NANOVOLTS_UNIT 3750
-+
-+struct bq27000_device_info {
-+	struct device *dev;
-+	struct power_supply bat;
-+
-+	int rsense_mohms;		/* from platform */
-+
-+	int (*hdq_initialized)(void); /* from platform */
-+	int (*hdq_read)(int); /* from platform */
-+	int (*hdq_write)(int, u8); /* from platform */
-+};
-+
-+/*
-+ * reading 16 bit values over HDQ has a special hazard where the
-+ * hdq device firmware can update the 16-bit register during the time we
-+ * read the two halves.  TI document SLUS556D recommends the algorithm here
-+ * to avoid trouble
-+ */
-+
-+static int hdq_read16(struct bq27000_device_info *di, int address)
-+{
-+	int acc;
-+	int high;
-+	int retries = 3;
-+
-+	while (retries--) {
-+
-+		high = (di->hdq_read)(address + 1); /* high part */
-+
-+		if (high < 0)
-+			return high;
-+		acc = (di->hdq_read)(address);
-+		if (acc < 0)
-+			return acc;
-+
-+		/* confirm high didn't change between reading it and low */
-+		if (high == (di->hdq_read)(address + 1))
-+			return (high << 8) | acc;
-+	}
-+
-+	return -ETIME;
-+}
-+
-+#define to_bq27000_device_info(x) container_of((x), \
-+					       struct bq27000_device_info, \
-+					       bat);
-+
-+static void bq27000_battery_external_power_changed(struct power_supply *psy)
-+{
-+	struct bq27000_device_info *di = to_bq27000_device_info(psy);
-+
-+	dev_dbg(di->dev, "%s\n", __FUNCTION__);
-+}
-+
-+static int bq27000_battery_get_property(struct power_supply *psy,
-+				       enum power_supply_property psp,
-+				       union power_supply_propval *val)
-+{
-+	int v, n;
-+	struct bq27000_device_info *di = to_bq27000_device_info(psy);
-+
-+	if (!(di->hdq_initialized)())
-+		return -EINVAL;
-+
-+	switch (psp) {
-+	case POWER_SUPPLY_PROP_STATUS:
-+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
-+		v = hdq_read16(di, BQ27000_AI_L);
-+		if (v < 0)
-+			return v;
-+		if (v < 2) { /* no real activity on the battery */
-+			if (!hdq_read16(di, BQ27000_TTF_L))
-+				val->intval = POWER_SUPPLY_STATUS_FULL;
-+			else
-+				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
-+			break;
-+		}
-+		/* power is actually going in or out... */
-+		v = (di->hdq_read)(BQ27000_FLAGS);
-+		if (v < 0)
-+			return v;
-+		if (v & BQ27000_STATUS_CHGS)
-+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
-+		else
-+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-+		break;
-+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-+		v = hdq_read16(di, BQ27000_VOLT_L);
-+		if (v < 0)
-+			return v;
-+		val->intval = v * 1000; /* mV -> uV */
-+		break;
-+	case POWER_SUPPLY_PROP_CURRENT_NOW:
-+		v = (di->hdq_read)(BQ27000_FLAGS);
-+		if (v < 0)
-+			return v;
-+		if (v & BQ27000_STATUS_CHGS)
-+			n = -NANOVOLTS_UNIT;
-+		else
-+			n = NANOVOLTS_UNIT;
-+		v = hdq_read16(di, BQ27000_AI_L);
-+		if (v < 0)
-+			return v;
-+		val->intval = (v * n) / di->rsense_mohms;
-+		break;
-+	case POWER_SUPPLY_PROP_CHARGE_FULL:
-+		v = hdq_read16(di, BQ27000_LMD_L);
-+		if (v < 0)
-+			return v;
-+		val->intval = (v * 3570) / di->rsense_mohms;
-+		break;
-+	case POWER_SUPPLY_PROP_TEMP:
-+		v = hdq_read16(di, BQ27000_TEMP_L);
-+		if (v < 0)
-+			return v;
-+		/* K (in 0.25K units) is 273.15 up from C (in 0.1C)*/
-+		/* 10926 = 27315 * 4 / 10 */
-+		val->intval = (((long)v * 10l) - 10926) / 4;
-+		break;
-+	case POWER_SUPPLY_PROP_TECHNOLOGY:
-+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
-+		break;
-+	case POWER_SUPPLY_PROP_CAPACITY:
-+		val->intval = (di->hdq_read)(BQ27000_RSOC);
-+		if (val->intval < 0)
-+			return val->intval;
-+		break;
-+	case POWER_SUPPLY_PROP_PRESENT:
-+		v = (di->hdq_read)(BQ27000_RSOC);
-+		val->intval = !(v < 0);
-+		break;
-+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
-+		v = hdq_read16(di, BQ27000_TTE_L);
-+		if (v < 0)
-+			return v;
-+		val->intval = 60 * v;
-+		break;
-+	case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
-+		v = hdq_read16(di, BQ27000_TTF_L);
-+		if (v < 0)
-+			return v;
-+		val->intval = 60 * v;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static enum power_supply_property bq27000_battery_props[] = {
-+	POWER_SUPPLY_PROP_STATUS,
-+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-+	POWER_SUPPLY_PROP_CURRENT_NOW,
-+	POWER_SUPPLY_PROP_CHARGE_FULL,
-+	POWER_SUPPLY_PROP_TEMP,
-+	POWER_SUPPLY_PROP_TECHNOLOGY,
-+	POWER_SUPPLY_PROP_PRESENT,
-+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
-+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
-+	POWER_SUPPLY_PROP_MODEL_NAME,
-+	POWER_SUPPLY_PROP_CAPACITY
-+};
-+
-+static int bq27000_battery_probe(struct platform_device *pdev)
-+{
-+	int retval = 0;
-+	struct bq27000_device_info *di;
-+	struct bq27000_platform_data *pdata;
-+
-+	dev_info(&pdev->dev, "BQ27000 Battery Driver (C) 2008 Openmoko, Inc\n");
-+
-+	di = kzalloc(sizeof(*di), GFP_KERNEL);
-+	if (!di) {
-+		retval = -ENOMEM;
-+		goto di_alloc_failed;
-+	}
-+
-+	platform_set_drvdata(pdev, di);
-+
-+	pdata = pdev->dev.platform_data;
-+	di->dev		= &pdev->dev;
-+	/* di->w1_dev	     = pdev->dev.parent; */
-+	di->bat.name	   = pdata->name;
-+	di->bat.type	   = POWER_SUPPLY_TYPE_BATTERY;
-+	di->bat.properties     = bq27000_battery_props;
-+	di->bat.num_properties = ARRAY_SIZE(bq27000_battery_props);
-+	di->bat.get_property   = bq27000_battery_get_property;
-+	di->bat.external_power_changed =
-+				  bq27000_battery_external_power_changed;
-+	di->hdq_read = pdata->hdq_read;
-+	di->hdq_write = pdata->hdq_write;
-+	di->rsense_mohms = pdata->rsense_mohms;
-+	di->hdq_initialized = pdata->hdq_initialized;
-+
-+	retval = power_supply_register(&pdev->dev, &di->bat);
-+	if (retval) {
-+		dev_err(di->dev, "failed to register battery\n");
-+		goto batt_failed;
-+	}
-+
-+	return 0;
-+
-+batt_failed:
-+	kfree(di);
-+di_alloc_failed:
-+	return retval;
-+}
-+
-+static int bq27000_battery_remove(struct platform_device *pdev)
-+{
-+	struct bq27000_device_info *di = platform_get_drvdata(pdev);
-+
-+	power_supply_unregister(&di->bat);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int bq27000_battery_suspend(struct platform_device *pdev,
-+				  pm_message_t state)
-+{
-+	return 0;
-+}
-+
-+static int bq27000_battery_resume(struct platform_device *pdev)
-+{
-+	return 0;
-+}
-+
-+#else
-+
-+#define bq27000_battery_suspend NULL
-+#define bq27000_battery_resume NULL
-+
-+#endif /* CONFIG_PM */
-+
-+static struct platform_driver bq27000_battery_driver = {
-+	.driver = {
-+		.name = "bq27000-battery",
-+	},
-+	.probe	  = bq27000_battery_probe,
-+	.remove   = bq27000_battery_remove,
-+	.suspend  = bq27000_battery_suspend,
-+	.resume	  = bq27000_battery_resume,
-+};
-+
-+static int __init bq27000_battery_init(void)
-+{
-+	return platform_driver_register(&bq27000_battery_driver);
-+}
-+
-+static void __exit bq27000_battery_exit(void)
-+{
-+	platform_driver_unregister(&bq27000_battery_driver);
-+}
-+
-+module_init(bq27000_battery_init);
-+module_exit(bq27000_battery_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
-+MODULE_DESCRIPTION("bq27000 battery driver");
-diff --git a/include/linux/bq27000_battery.h b/include/linux/bq27000_battery.h
-new file mode 100644
-index 0000000..36b4f20
---- /dev/null
-+++ b/include/linux/bq27000_battery.h
-@@ -0,0 +1,12 @@
-+#ifndef __BQ27000_BATTERY_H__
-+#define __BQ27000_BATTERY_H__
-+
-+struct bq27000_platform_data {
-+	const char 	*name;
-+	int		rsense_mohms;
-+	int (*hdq_read)(int);
-+	int (*hdq_write)(int, u8);
-+	int (*hdq_initialized)(void);
-+};
-+
-+#endif
--- 
-1.5.6.3
-