change prefix for kernelpatchbase 2.6.26

SVN-Revision: 13619

1 files changed, 0 insertions, 76 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.26/0242-silence-serial-console-gta01.patch.patch b/target/linux/s3c24xx/patches-2.6.26/0242-silence-serial-console-gta01.patch.patch
deleted file mode 100755
index 41a74c955c..0000000000
--- a/target/linux/s3c24xx/patches-2.6.26/0242-silence-serial-console-gta01.patch.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 85ef1fb82db8188fd5a615e557bf5407113d163f Mon Sep 17 00:00:00 2001
-From: Mike Westerhof <mwester@dls.net>
-Date: Sun, 10 Aug 2008 09:13:20 +0100
-Subject: [PATCH] silence-serial-console-gta01.patch
-
-    This patch ensures that no console data will go the UART while
-    the GSM mux is switched to the GSM.  This is necessary despite
-    the code that disables the console due to the fact that the
-    console resumes before the neo1973_pm_gsm driver, and consoles
-    always resume in the "on" state.
-
-Signed-off-by: Mike Westerhof <mwester@dls.net>
----
- arch/arm/plat-s3c24xx/neo1973_pm_gsm.c |    3 +++
- drivers/serial/s3c2410.c               |   10 ++++++++++
- 2 files changed, 13 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c b/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c
-index 901f8fb..8d5e41c 100644
---- a/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c
-+++ b/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c
-@@ -31,6 +31,7 @@
- #include <asm/arch/regs-gpioj.h>
- #endif
- 
-+extern void s3c24xx_serial_console_set_silence(int silence);
- extern void s3c24xx_serial_register_resume_dependency(struct resume_dependency *
- 					     resume_dependency, int uart_index);
- 
-@@ -105,6 +106,7 @@ static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
- 					 "disconnecting serial console\n");
- 
- 				console_stop(gta01_gsm.con);
-+				s3c24xx_serial_console_set_silence(1);
- 			}
- 
- 			if (gta01_gsm.gpio_ngsm_en)
-@@ -144,6 +146,7 @@ static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
- 				s3c2410_gpio_setpin(gta01_gsm.gpio_ngsm_en, 1);
- 
- 			if (gta01_gsm.con) {
-+				s3c24xx_serial_console_set_silence(0);
- 				console_start(gta01_gsm.con);
- 
- 				dev_dbg(dev, "powered down GSM, thus enabling "
-diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
-index d0b55b1..8de1564 100644
---- a/drivers/serial/s3c2410.c
-+++ b/drivers/serial/s3c2410.c
-@@ -1791,6 +1791,13 @@ module_exit(s3c24xx_serial_modexit);
- #ifdef CONFIG_SERIAL_S3C2410_CONSOLE
- 
- static struct uart_port *cons_uart;
-+static int cons_silenced;
-+
-+void s3c24xx_serial_console_set_silence(int silenced)
-+{
-+	cons_silenced = silenced;
-+}
-+EXPORT_SYMBOL(s3c24xx_serial_console_set_silence);
- 
- static int
- s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
-@@ -1817,6 +1824,9 @@ s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
- 	unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
- 	unsigned int umcon = rd_regl(cons_uart, S3C2410_UMCON);
- 
-+	if (cons_silenced)
-+		return;
-+
- 	/* If auto HW flow control enabled, temporarily turn it off */
- 	if (umcon & S3C2410_UMCOM_AFC)
- 		wr_regl(port, S3C2410_UMCON, (umcon & !S3C2410_UMCOM_AFC));
--- 
-1.5.6.3
-