kernel: bump 5.4 to 5.4.163

Removed upstreamed:
 target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
 target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch
 target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch
 target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch
 target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch

The following patch does not apply to upstream any more and needs some
more work to make it work fully again. I am not sure if we are still
able to set the UART to a none standard baud rate.
 target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch

These patches needed manually changes:
  target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch
  target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch
  target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch
  target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
  target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch

All others updated automatically.

Compile-tested on: malta/le, armvirt/64, lantiq/xrx200
Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

4 files changed, 7 insertions, 7 deletions

diff --git a/target/linux/ramips/patches-5.4/0031-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-5.4/0031-uvc-add-iPassion-iP2970-support.patch
index 306ae6cfda..f088babc4e 100644
--- a/target/linux/ramips/patches-5.4/0031-uvc-add-iPassion-iP2970-support.patch
+++ b/target/linux/ramips/patches-5.4/0031-uvc-add-iPassion-iP2970-support.patch
@@ -13,7 +13,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/media/usb/uvc/uvc_driver.c
 +++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -2911,6 +2911,18 @@ static const struct usb_device_id uvc_id
+@@ -2916,6 +2916,18 @@ static const struct usb_device_id uvc_id
  	  .bInterfaceSubClass	= 1,
  	  .bInterfaceProtocol	= 0,
  	  .driver_info		= UVC_INFO_META(V4L2_META_FMT_D4XX) },
@@ -64,7 +64,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  #include <media/v4l2-common.h>
  
-@@ -1183,9 +1188,149 @@ static void uvc_video_decode_data(struct
+@@ -1188,9 +1193,149 @@ static void uvc_video_decode_data(struct
  	uvc_urb->async_operations++;
  }
  
@@ -214,7 +214,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	/* Mark the buffer as done if the EOF marker is set. */
  	if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
  		uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
-@@ -1742,6 +1887,8 @@ static int uvc_init_video_isoc(struct uv
+@@ -1747,6 +1892,8 @@ static int uvc_init_video_isoc(struct uv
  	if (npackets == 0)
  		return -ENOMEM;
  
diff --git a/target/linux/ramips/patches-5.4/0051-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-5.4/0051-serial-add-ugly-custom-baud-rate-hack.patch
index 4822226610..7192d61323 100644
--- a/target/linux/ramips/patches-5.4/0051-serial-add-ugly-custom-baud-rate-hack.patch
+++ b/target/linux/ramips/patches-5.4/0051-serial-add-ugly-custom-baud-rate-hack.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/tty/serial/serial_core.c
 +++ b/drivers/tty/serial/serial_core.c
-@@ -416,6 +416,9 @@ uart_get_baud_rate(struct uart_port *por
+@@ -423,6 +423,9 @@ uart_get_baud_rate(struct uart_port *por
  		break;
  	}
  
diff --git a/target/linux/ramips/patches-5.4/0098-disable_cm.patch b/target/linux/ramips/patches-5.4/0098-disable_cm.patch
index 9b280aef99..1f3367568f 100644
--- a/target/linux/ramips/patches-5.4/0098-disable_cm.patch
+++ b/target/linux/ramips/patches-5.4/0098-disable_cm.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/kernel/mips-cm.c
 +++ b/arch/mips/kernel/mips-cm.c
-@@ -233,6 +233,7 @@ int mips_cm_probe(void)
+@@ -232,6 +232,7 @@ int mips_cm_probe(void)
  
  	/* disable CM regions */
  	write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR);
@@ -8,7 +8,7 @@
  	write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK);
  	write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR);
  	write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK);
-@@ -240,7 +241,7 @@ int mips_cm_probe(void)
+@@ -239,7 +240,7 @@ int mips_cm_probe(void)
  	write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK);
  	write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR);
  	write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK);
diff --git a/target/linux/ramips/patches-5.4/0122-mips-ralink-enable-zboot-support.patch b/target/linux/ramips/patches-5.4/0122-mips-ralink-enable-zboot-support.patch
index 34617898c8..86600e859e 100644
--- a/target/linux/ramips/patches-5.4/0122-mips-ralink-enable-zboot-support.patch
+++ b/target/linux/ramips/patches-5.4/0122-mips-ralink-enable-zboot-support.patch
@@ -16,7 +16,7 @@ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -626,6 +626,7 @@ config RALINK
+@@ -629,6 +629,7 @@ config RALINK
  	select SYS_SUPPORTS_32BIT_KERNEL
  	select SYS_SUPPORTS_LITTLE_ENDIAN
  	select SYS_SUPPORTS_MIPS16