ramips: bump to v4.9

Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 0 insertions, 81 deletions

diff --git a/target/linux/ramips/patches-4.4/0518-net-mediatek-get-rt3050-ethernet-ports-to-be-disable.patch b/target/linux/ramips/patches-4.4/0518-net-mediatek-get-rt3050-ethernet-ports-to-be-disable.patch
deleted file mode 100644
index 54448bd505..0000000000
--- a/target/linux/ramips/patches-4.4/0518-net-mediatek-get-rt3050-ethernet-ports-to-be-disable.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From: Vittorio Gambaletta <openwrt@vittgam.net>
-Date: Fri, 01 Jan 2016 00:00:02 +0100
-Subject: [PATCH 3/3] net: mediatek: Get rt3050 ethernet ports to be disabled from the device tree.
-
-This patch allows configuring ports to be disabled in the device tree; this
-saves power, since disabling ports here actually disables power to ethernet
-PHYs.
-
-Line 444 enables all ethernet ports, so line 487 is getting zero ports to be
-disabled, except for port 5 in SoCs where this is not implemented as it will
-be sticky disabled in register POC0. Because of this, the code will still read
-the switch configuration and OR it to the device tree setting.
-
-Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
----
-
---- a/drivers/net/ethernet/mediatek/esw_rt3050.c
-+++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
-@@ -10,6 +10,7 @@
-  *   Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-  *   Copyright (C) 2009-2015 Felix Fietkau <nbd@nbd.name>
-  *   Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ *   Copyright (C) 2016 Vittorio Gambaletta <openwrt@vittgam.net>
-  */
- 
- #include <linux/module.h>
-@@ -219,6 +220,7 @@ struct rt305x_esw {
- 	spinlock_t		reg_rw_lock;
- 
- 	unsigned char		port_map;
-+	unsigned char		port_disable;
- 	unsigned int		reg_led_polarity;
- 
- 	struct switch_dev	swdev;
-@@ -483,8 +485,14 @@ static void esw_hw_init(struct rt305x_es
- 	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
- 	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
- 
--	/* Copy disabled port configuration from bootloader setup */
--	port_disable = esw_get_port_disable(esw);
-+	/* Copy disabled port configuration from device tree setup */
-+	port_disable = esw->port_disable;
-+
-+	/* Disable nonexistent ports by reading the switch config
-+	 * after having enabled all possible ports above
-+	 */
-+	port_disable |= esw_get_port_disable(esw);
-+
- 	for (i = 0; i < 6; i++)
- 		esw->ports[i].disable = (port_disable & (1 << i)) != 0;
- 
-@@ -1330,7 +1338,7 @@ static int esw_probe(struct platform_dev
- {
- 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	struct device_node *np = pdev->dev.of_node;
--	const __be32 *port_map, *reg_init;
-+	const __be32 *port_map, *port_disable, *reg_init;
- 	struct switch_dev *swdev;
- 	struct rt305x_esw *esw;
- 	int ret;
-@@ -1349,6 +1357,10 @@ static int esw_probe(struct platform_dev
- 	if (port_map)
- 		esw->port_map = be32_to_cpu(*port_map);
- 
-+	port_disable = of_get_property(np, "mediatek,portdisable", NULL);
-+	if (port_disable)
-+		esw->port_disable = be32_to_cpu(*port_disable);
-+
- 	reg_init = of_get_property(np, "mediatek,led_polarity", NULL);
- 	if (reg_init)
- 		esw->reg_led_polarity = be32_to_cpu(*reg_init);
---- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
-+++ b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
-@@ -16,6 +16,7 @@ Required properties:
- Optional properties:
- - mediatek,portmap: can be used to choose if the default switch setup is
-   llllw or wllll
-+- mediatek,portdisable: disable unused ethernet PHYs to save power
- - mediatek,led_polarity: override the active high/low settings of the leds
- 
- Example: