ralink: add 3.18 support

keep default as 3.14, mt7621 gic need to be ported to 3.18

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44349

1 files changed, 476 insertions, 0 deletions

diff --git a/target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch
new file mode 100644
index 0000000000..cb691f3365
--- /dev/null
+++ b/target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch
@@ -0,0 +1,476 @@
+From fc006d0622ab8c43086b2c9018c03012db332033 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 11:15:12 +0100
+Subject: [PATCH 50/57] SPI: ralink: add Ralink SoC spi driver
+
+Add the driver needed to make SPI work on Ralink SoC.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/Kconfig      |    6 +
+ drivers/spi/Makefile     |    1 +
+ drivers/spi/spi-rt2880.c |  432 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 439 insertions(+)
+ create mode 100644 drivers/spi/spi-rt2880.c
+
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -433,6 +433,12 @@ config SPI_QUP
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called spi_qup.
+ 
++config SPI_RT2880
++	tristate "Ralink RT288x SPI Controller"
++	depends on RALINK
++	help
++	  This selects a driver for the Ralink RT288x/RT305x SPI Controller.
++
+ config SPI_S3C24XX
+ 	tristate "Samsung S3C24XX series SPI"
+ 	depends on ARCH_S3C24XX
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -65,6 +65,7 @@ obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa
+ obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
+ obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
+ obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
++obj-$(CONFIG_SPI_RT2880)		+= spi-rt2880.o
+ obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y			:= spi-s3c24xx.o
+ spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
+--- /dev/null
++++ b/drivers/spi/spi-rt2880.c
+@@ -0,0 +1,432 @@
++/*
++ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
++ *
++ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
++ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Some parts are based on spi-orion.c:
++ *   Author: Shadi Ammouri <shadi@marvell.com>
++ *   Copyright (C) 2007-2008 Marvell Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/reset.h>
++#include <linux/spi/spi.h>
++#include <linux/platform_device.h>
++
++#define DRIVER_NAME			"spi-rt2880"
++/* only one slave is supported*/
++#define RALINK_NUM_CHIPSELECTS		1
++/* in usec */
++#define RALINK_SPI_WAIT_MAX_LOOP	2000
++
++#define RAMIPS_SPI_STAT			0x00
++#define RAMIPS_SPI_CFG			0x10
++#define RAMIPS_SPI_CTL			0x14
++#define RAMIPS_SPI_DATA			0x20
++#define RAMIPS_SPI_FIFO_STAT		0x38
++
++/* SPISTAT register bit field */
++#define SPISTAT_BUSY			BIT(0)
++
++/* SPICFG register bit field */
++#define SPICFG_LSBFIRST			0
++#define SPICFG_MSBFIRST			BIT(8)
++#define SPICFG_SPICLKPOL		BIT(6)
++#define SPICFG_RXCLKEDGE_FALLING	BIT(5)
++#define SPICFG_TXCLKEDGE_FALLING	BIT(4)
++#define SPICFG_SPICLK_PRESCALE_MASK	0x7
++#define SPICFG_SPICLK_DIV2		0
++#define SPICFG_SPICLK_DIV4		1
++#define SPICFG_SPICLK_DIV8		2
++#define SPICFG_SPICLK_DIV16		3
++#define SPICFG_SPICLK_DIV32		4
++#define SPICFG_SPICLK_DIV64		5
++#define SPICFG_SPICLK_DIV128		6
++#define SPICFG_SPICLK_DISABLE		7
++
++/* SPICTL register bit field */
++#define SPICTL_HIZSDO			BIT(3)
++#define SPICTL_STARTWR			BIT(2)
++#define SPICTL_STARTRD			BIT(1)
++#define SPICTL_SPIENA			BIT(0)
++
++/* SPIFIFOSTAT register bit field */
++#define SPIFIFOSTAT_TXFULL		BIT(17)
++
++struct rt2880_spi {
++	struct spi_master	*master;
++	void __iomem		*base;
++	unsigned int		sys_freq;
++	unsigned int		speed;
++	struct clk		*clk;
++	spinlock_t		lock;
++};
++
++static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
++{
++	return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
++{
++	return ioread32(rs->base + reg);
++}
++
++static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg, u32 val)
++{
++	iowrite32(val, rs->base + reg);
++}
++
++static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++	void __iomem *addr = rs->base + reg;
++	unsigned long flags;
++	u32 val;
++
++	spin_lock_irqsave(&rs->lock, flags);
++	val = ioread32(addr);
++	val |= mask;
++	iowrite32(val, addr);
++	spin_unlock_irqrestore(&rs->lock, flags);
++}
++
++static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++	void __iomem *addr = rs->base + reg;
++	unsigned long flags;
++	u32 val;
++
++	spin_lock_irqsave(&rs->lock, flags);
++	val = ioread32(addr);
++	val &= ~mask;
++	iowrite32(val, addr);
++	spin_unlock_irqrestore(&rs->lock, flags);
++}
++
++static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
++{
++	struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++	u32 rate;
++	u32 prescale;
++	u32 reg;
++
++	dev_dbg(&spi->dev, "speed:%u\n", speed);
++
++	/*
++	 * the supported rates are: 2, 4, 8, ... 128
++	 * round up as we look for equal or less speed
++	 */
++	rate = DIV_ROUND_UP(rs->sys_freq, speed);
++	dev_dbg(&spi->dev, "rate-1:%u\n", rate);
++	rate = roundup_pow_of_two(rate);
++	dev_dbg(&spi->dev, "rate-2:%u\n", rate);
++
++	/* check if requested speed is too small */
++	if (rate > 128)
++		return -EINVAL;
++
++	if (rate < 2)
++		rate = 2;
++
++	/* Convert the rate to SPI clock divisor value.	*/
++	prescale = ilog2(rate / 2);
++	dev_dbg(&spi->dev, "prescale:%u\n", prescale);
++
++	reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++	reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
++	rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++	rs->speed = speed;
++	return 0;
++}
++
++/*
++ * called only when no transfer is active on the bus
++ */
++static int
++rt2880_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
++{
++	struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++	unsigned int speed = spi->max_speed_hz;
++	int rc;
++
++	if ((t != NULL) && t->speed_hz)
++		speed = t->speed_hz;
++
++	if (rs->speed != speed) {
++		dev_dbg(&spi->dev, "speed_hz:%u\n", speed);
++		rc = rt2880_spi_baudrate_set(spi, speed);
++		if (rc)
++			return rc;
++	}
++
++	return 0;
++}
++
++static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
++{
++	if (enable)
++		rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++	else
++		rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++}
++
++static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
++{
++	int i;
++
++	for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
++		u32 status;
++
++		status = rt2880_spi_read(rs, RAMIPS_SPI_STAT);
++		if ((status & SPISTAT_BUSY) == 0)
++			return 0;
++
++		cpu_relax();
++		udelay(1);
++	}
++
++	return -ETIMEDOUT;
++}
++
++static unsigned int
++rt2880_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
++{
++	struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++	unsigned count = 0;
++	u8 *rx = xfer->rx_buf;
++	const u8 *tx = xfer->tx_buf;
++	int err;
++
++	dev_dbg(&spi->dev, "read (%d): %s %s\n", xfer->len,
++		  (tx != NULL) ? "tx" : "  ",
++		  (rx != NULL) ? "rx" : "  ");
++
++	if (tx) {
++		for (count = 0; count < xfer->len; count++) {
++			rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
++			rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
++			err = rt2880_spi_wait_till_ready(rs);
++			if (err) {
++				dev_err(&spi->dev, "TX failed, err=%d\n", err);
++				goto out;
++			}
++		}
++	}
++
++	if (rx) {
++		for (count = 0; count < xfer->len; count++) {
++			rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
++			err = rt2880_spi_wait_till_ready(rs);
++			if (err) {
++				dev_err(&spi->dev, "RX failed, err=%d\n", err);
++				goto out;
++			}
++			rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
++		}
++	}
++
++out:
++	return count;
++}
++
++static int rt2880_spi_transfer_one_message(struct spi_master *master,
++					   struct spi_message *m)
++{
++	struct rt2880_spi *rs = spi_master_get_devdata(master);
++	struct spi_device *spi = m->spi;
++	struct spi_transfer *t = NULL;
++	int par_override = 0;
++	int status = 0;
++	int cs_active = 0;
++
++	/* Load defaults */
++	status = rt2880_spi_setup_transfer(spi, NULL);
++	if (status < 0)
++		goto msg_done;
++
++	list_for_each_entry(t, &m->transfers, transfer_list) {
++		if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
++			dev_err(&spi->dev,
++				"message rejected: invalid transfer data buffers\n");
++			status = -EIO;
++			goto msg_done;
++		}
++
++		if (t->speed_hz && t->speed_hz < (rs->sys_freq / 128)) {
++			dev_err(&spi->dev,
++				"message rejected: device min speed (%d Hz) exceeds required transfer speed (%d Hz)\n",
++				(rs->sys_freq / 128), t->speed_hz);
++			status = -EIO;
++			goto msg_done;
++		}
++
++		if (par_override || t->speed_hz || t->bits_per_word) {
++			par_override = 1;
++			status = rt2880_spi_setup_transfer(spi, t);
++			if (status < 0)
++				goto msg_done;
++			if (!t->speed_hz && !t->bits_per_word)
++				par_override = 0;
++		}
++
++		if (!cs_active) {
++			rt2880_spi_set_cs(rs, 1);
++			cs_active = 1;
++		}
++
++		if (t->len)
++			m->actual_length += rt2880_spi_write_read(spi, t);
++
++		if (t->delay_usecs)
++			udelay(t->delay_usecs);
++
++		if (t->cs_change) {
++			rt2880_spi_set_cs(rs, 0);
++			cs_active = 0;
++		}
++	}
++
++msg_done:
++	if (cs_active)
++		rt2880_spi_set_cs(rs, 0);
++
++	m->status = status;
++	spi_finalize_current_message(master);
++
++	return 0;
++}
++
++static int rt2880_spi_setup(struct spi_device *spi)
++{
++	struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++
++	if ((spi->max_speed_hz == 0) ||
++	    (spi->max_speed_hz > (rs->sys_freq / 2)))
++		spi->max_speed_hz = (rs->sys_freq / 2);
++
++	if (spi->max_speed_hz < (rs->sys_freq / 128)) {
++		dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
++			spi->max_speed_hz);
++		return -EINVAL;
++	}
++
++	/*
++	 * baudrate & width will be set rt2880_spi_setup_transfer
++	 */
++	return 0;
++}
++
++static void rt2880_spi_reset(struct rt2880_spi *rs)
++{
++	rt2880_spi_write(rs, RAMIPS_SPI_CFG,
++			 SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
++			 SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
++	rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
++}
++
++static int rt2880_spi_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct rt2880_spi *rs;
++	unsigned long flags;
++	void __iomem *base;
++	struct resource *r;
++	int status = 0;
++	struct clk *clk;
++
++	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	base = devm_ioremap_resource(&pdev->dev, r);
++	if (IS_ERR(base))
++		return PTR_ERR(base);
++
++	clk = devm_clk_get(&pdev->dev, NULL);
++	if (IS_ERR(clk)) {
++		dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
++			status);
++		return PTR_ERR(clk);
++	}
++
++	status = clk_prepare_enable(clk);
++	if (status)
++		return status;
++
++	master = spi_alloc_master(&pdev->dev, sizeof(*rs));
++	if (master == NULL) {
++		dev_dbg(&pdev->dev, "master allocation failed\n");
++		return -ENOMEM;
++	}
++
++	/* we support only mode 0, and no options */
++	master->mode_bits = 0;
++
++	master->setup = rt2880_spi_setup;
++	master->transfer_one_message = rt2880_spi_transfer_one_message;
++	master->num_chipselect = RALINK_NUM_CHIPSELECTS;
++	master->bits_per_word_mask = SPI_BPW_MASK(8);
++	master->dev.of_node = pdev->dev.of_node;
++
++	dev_set_drvdata(&pdev->dev, master);
++
++	rs = spi_master_get_devdata(master);
++	rs->base = base;
++	rs->clk = clk;
++	rs->master = master;
++	rs->sys_freq = clk_get_rate(rs->clk);
++	dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
++	spin_lock_irqsave(&rs->lock, flags);
++
++	device_reset(&pdev->dev);
++
++	rt2880_spi_reset(rs);
++
++	return spi_register_master(master);
++}
++
++static int rt2880_spi_remove(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct rt2880_spi *rs;
++
++	master = dev_get_drvdata(&pdev->dev);
++	rs = spi_master_get_devdata(master);
++
++	clk_disable(rs->clk);
++	spi_unregister_master(master);
++
++	return 0;
++}
++
++MODULE_ALIAS("platform:" DRIVER_NAME);
++
++static const struct of_device_id rt2880_spi_match[] = {
++	{ .compatible = "ralink,rt2880-spi" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, rt2880_spi_match);
++
++static struct platform_driver rt2880_spi_driver = {
++	.driver = {
++		.name = DRIVER_NAME,
++		.owner = THIS_MODULE,
++		.of_match_table = rt2880_spi_match,
++	},
++	.probe = rt2880_spi_probe,
++	.remove = rt2880_spi_remove,
++};
++
++module_platform_driver(rt2880_spi_driver);
++
++MODULE_DESCRIPTION("Ralink SPI driver");
++MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL");