diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2020-12-11 23:14:58 +0900 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-01-29 15:32:07 +0100 |
| commit | eb11cd9ea3822b34df6260b1dd40fc4f0866b804 (patch) | |
| tree | e018ff967cbaafd4aeb81c0d8d30c932f173b1b5 /target/linux/ramips/mt7621 | |
| parent | 0071c7cd8246197ae27d8a0c4b5bdf7976dbe362 (diff) | |
| download | upstream-eb11cd9ea3822b34df6260b1dd40fc4f0866b804.tar.gz upstream-eb11cd9ea3822b34df6260b1dd40fc4f0866b804.tar.bz2 upstream-eb11cd9ea3822b34df6260b1dd40fc4f0866b804.zip | |
ramips: add support for ELECOM WRC-2533GHBK-I
ELECOM WRC-2533GHBK-I is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based
on MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 128 MiB
- Flash : SPI-NOR 16 MiB
- WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615)
- Ethernet : 10/100/1000 Mbps x5
- Switch : MediaTek MT7530 (SoC)
- LED/keys : 4x/3x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J4: 3.3V, RX, GND, TX from SoC side
- 57600n8
- Power : 12VDC, 1.5A
Flash instruction using factory image:
1. Boot WRC-2533GHBK-I normally
2. Access to "http://192.168.2.1/" and open firmware update page
("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~150 seconds to complete flashing
MAC addresses:
LAN : BC:5C:4C:xx:xx:89 (Config, ethaddr (text))
WAN : BC:5C:4C:xx:xx:88 (Config, wanaddr (text))
2.4GHz : BC:5C:4C:xx:xx:8A (Factory, 0x4 (hex))
5GHz : BC:5C:4C:xx:xx:8B (Factory, 0x8004 (hex))
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ramips/mt7621')
| -rwxr-xr-x | target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 154f218bfe..dbb8e04abb 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -98,6 +98,11 @@ ramips_setup_macs() lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) ;; + elecom,wrc-2533ghbk-i) + lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) + wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) + label_mac=$wan_mac + ;; hiwifi,hc5962) lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ") label_mac=$lan_mac |