diff options
| author | Abdul Aziz Amar <abdulaziz.amar@gmail.com> | 2022-03-14 05:26:23 -0400 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-04-16 14:02:11 +0200 |
| commit | 78c3534645958c123aa82cec9926a34eed5dd5dd (patch) | |
| tree | a7790800fa9bff034eef41290946c80e8c20efd6 /target/linux/ramips/image | |
| parent | bb505d82add5636da891bb97fdabc57947280e88 (diff) | |
| download | upstream-78c3534645958c123aa82cec9926a34eed5dd5dd.tar.gz upstream-78c3534645958c123aa82cec9926a34eed5dd5dd.tar.bz2 upstream-78c3534645958c123aa82cec9926a34eed5dd5dd.zip | |
ramips: add support for BOLT! Arion
This device is from now-defunct BOLT! ISP in Indonesia.
The original firmware is based on mediatek SDK running linux 2.6 or 3.x in later revision.
Specifications:
- SoC: MediaTek MT7621
- Flash: 32 MiB NOR SPI
- RAM: 128 MiB DDR3
- Ethernet: 2x 10/100/1000 Mbps (switched, LAN + WAN)
- WIFI0: MT7603E 2.4GHz 802.11b/g/n
- WIFI1: MT7612E 5GHz 802.11ac
- Antennas: 2x internal, non-detachable
- LEDs: Programmable LEDs: 5 blue LEDs (wlan, tel, sig1-3) and 2 red LEDs (wlan and sig1)
Non-programmable "Power" LED
- Buttons: Reset and WPS
Instalation:
Install from TFTP
Set your PC IP to 10.10.10.3 and gateway to 10.10.10.123
Press "1" when turning on the router, and type the initramfs file name
You also need to solder pin header or cable to J4 or neighboring test points (T19-T21)
Pinouts from top to bottom: GND, TX, RX, VCC (3.3v)
Baudrate: 57600n8
There's also an additional gigabit transformer and RTL8211FD managed by the LTE module on the backside of the PCB.
Signed-off-by: Abdul Aziz Amar <abdulaziz.amar@gmail.com>
Diffstat (limited to 'target/linux/ramips/image')
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 1e9b59d74f..3b34c9d364 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -288,6 +288,16 @@ define Device/buffalo_wsr-600dhp endef TARGET_DEVICES += buffalo_wsr-600dhp +define Device/bolt_arion + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 32448k + DEVICE_VENDOR := BOLT + DEVICE_MODEL := Arion + DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 uboot-envtools +endef +TARGET_DEVICES += bolt_arion + define Device/cudy_wr1300 $(Device/dsa-migration) IMAGE_SIZE := 15872k |