diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-07-26 23:24:22 +0900 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-07-30 15:55:21 +0200 |
| commit | ce93445cd6058ae37ca3d257792f68cd98e758da (patch) | |
| tree | 1eddc84811b79ffc8721553ddac0ddf8a682743d /target/linux/ramips/dts/kn_rf.dts | |
| parent | 869b0d11db926a925bff6bad6024a0031bb259ac (diff) | |
| download | upstream-ce93445cd6058ae37ca3d257792f68cd98e758da.tar.gz upstream-ce93445cd6058ae37ca3d257792f68cd98e758da.tar.bz2 upstream-ce93445cd6058ae37ca3d257792f68cd98e758da.zip | |
ramips: add support for ELECOM WRC-2533GST
ELECOM WRC-2533GST is a 2.4/5 GHz band 11ac rotuer, based on
MediaTek MT7621A.
Specification:
- MT7621A (2-Core, 4-Threads)
- 128 MB of RAM (DDR3)
- 16 MB of Flash (SPI)
- 4T4R 2.4/5 GHz wifi
- MediaTek MT7615
- 5x 10/100/1000 Mbps Ethernet
- 4x LEDs, 6 keys (2x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- baudrate: 57600 bps
Flash instruction using factory image:
1. Connect the computer to the LAN port of WRC-2533GST
2. Connect power cable to WRC-2533GST and turn on it
3. Access to "https://192.168.2.1/" and open firmware update
page ("ファームウェア更新")
4. Select the OpenWrt factory image and click apply ("適用")
button
5. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ramips/dts/kn_rf.dts')
0 files changed, 0 insertions, 0 deletions