diff options
| author | Giuseppe Lippolis <giu.lippolis@gmail.com> | 2018-03-10 10:34:38 +0100 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-04-04 08:42:35 +0200 |
| commit | 6525bffc0a7ee6fabfe331a4d9e3eeabdd3516ae (patch) | |
| tree | 4d91984eefef92212b58ba195df91970e24f86bc /target/linux/ramips/dts/W06.dts | |
| parent | e9d5f8ebb25721c28a37390081fd4a08c3d0f8d4 (diff) | |
| download | upstream-6525bffc0a7ee6fabfe331a4d9e3eeabdd3516ae.tar.gz upstream-6525bffc0a7ee6fabfe331a4d9e3eeabdd3516ae.tar.bz2 upstream-6525bffc0a7ee6fabfe331a4d9e3eeabdd3516ae.zip | |
ramips: add support for DLINK DWR-921-C1
The DWR-921-C1 Wireless Routers with LTE embedded modem is based on the
MT7620N SoC.
Specification:
* MediaTek MT7620N (580 Mhz)
* 64 MB of RAM
* 16 MB of FLASH
* 802.11bgn radio
* 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
* 2x external, detachable (LTE) antennas
* UART header on PCB (57600 8n1)
* 6x LED (GPIO-controlled)
* 1x bi-color Signal Strength LED (GPIO-controlled)
* 2x button
* JBOOT bootloader
The status led has been assigned to the dwr-921-c1:green:sigstrength (lte
signal strength) led. At the end of the boot it is switched off and is
available for lte operation. Work correctly also during sysupgrade
operation.
Installation:
Apply factory image via d-link http web-gui.
How to revert to OEM firmware:
1.) Push the reset button and turn on the power. Wait until LED start
blinking (~10sec.)
2.) Upload original factory image via JBOOT http (IP: 192.168.123.254)
3.) If http doesn't work, it can be done with curl command:
curl -F FN=@XXXXX.bin http://192.168.123.254/upg
where XXXXX.bin is name of firmware file.
Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
Diffstat (limited to 'target/linux/ramips/dts/W06.dts')
0 files changed, 0 insertions, 0 deletions