diff options
| author | Chuanhong Guo <gch981213@gmail.com> | 2018-06-21 00:56:38 +0800 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-06-21 22:01:33 +0200 |
| commit | 7950e1b9f47417bcd4b80e4361dfc6dccb000ba7 (patch) | |
| tree | 0f38a586a19260a2b48e394b69634fa3fe7320c5 /target/linux/ramips/dts/TEW-638APB-V2.dts | |
| parent | c2da3505e21ba8d34d99d90c3054ba6db07c0544 (diff) | |
| download | upstream-7950e1b9f47417bcd4b80e4361dfc6dccb000ba7.tar.gz upstream-7950e1b9f47417bcd4b80e4361dfc6dccb000ba7.tar.bz2 upstream-7950e1b9f47417bcd4b80e4361dfc6dccb000ba7.zip | |
ramips: Add support for Phicomm K2G
Specification:
- SoC: MediaTek MT7620A
- Flash: 8 MB
- RAM: 64 MB
- Ethernet: 4 FE ports and 1 GE port (RTL8211F on port 5)
- Wireless radio: MT7620 for 2.4G and MT7612E for 5G, both equipped with external PA.
- UART: 1 x UART on PCB - 57600 8N1
Flash instruction:
The U-boot is based on Ralink SDK so we can flash the firmware using UART:
1. Configure PC with a static IP address and setup an TFTP server.
2. Put the firmware into the tftp directory.
3. Connect the UART line as described on the PCB.
4. Power up the device and press 2, follow the instruction to
set device and tftp server IP address and input the firmware
file name. U-boot will then load the firmware and write it into
the flash.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Diffstat (limited to 'target/linux/ramips/dts/TEW-638APB-V2.dts')
0 files changed, 0 insertions, 0 deletions