ramips/mt7621: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 168 deletions

diff --git a/target/linux/ramips/dts/RBM11G.dts b/target/linux/ramips/dts/RBM11G.dts
deleted file mode 100644
index ce8d7208f1..0000000000
--- a/target/linux/ramips/dts/RBM11G.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-/dts-v1/;
-
-#include "mt7621.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "mikrotik,rbm11g", "mediatek,mt7621-soc";
-	model = "MikroTik RouterBOARD M11G";
-
-	aliases {
-		led-boot = &led_usr;
-		led-failsafe = &led_usr;
-		led-running = &led_usr;
-		led-upgrade = &led_usr;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_usr: usr {
-			label = "rbm11g:green:usr";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		rssi0 {
-			label = "rbm11g:green:rssi0";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-
-		rssi1 {
-			label = "rbm11g:green:rssi1";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		rssi2 {
-			label = "rbm11g:green:rssi2";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		rssi3 {
-			label = "rbm11g:green:rssi3";
-			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		};
-
-		rssi4 {
-			label = "rbm11g:green:rssi4";
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-		res {
-			label = "reset";
-			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	pcie0_vcc_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "pcie0_vcc";
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-
-&spi0 {
-	status = "okay";
-
-	w25q128@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		// XXX empiric value to obtain actual 10MHz SCK at the chip
-		spi-max-frequency = <3125000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "RouterBoot";
-				reg = <0x0 0x40000>;
-				read-only;
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "bootloader1";
-					reg = <0x0 0xf000>;
-					read-only;
-				};
-
-				hard_config: partition@f000 {
-					label = "hard_config";
-					reg = <0xf000 0x1000>;
-					read-only;
-				};
-
-				partition@10000 {
-					label = "bootloader2";
-					reg = <0x10000 0xf000>;
-					read-only;
-				};
-
-				partition@20000 {
-					label = "soft_config";
-					reg = <0x20000 0x1000>;
-				};
-
-				partition@30000 {
-					label = "bios";
-					reg = <0x30000 0x1000>;
-					read-only;
-				};
-			};
-
-			partition@40000 {
-				compatible = "mikrotik,minor";
-				label = "firmware";
-				reg = <0x040000 0xFC0000>;
-			};
-		};
-	};
-};
-
-&ethernet {
-	mtd-mac-address = <&hard_config 0x0010>;
-	mtd-mac-address-increment = <1>;
-};
-
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "uart2", "wdt", "rgmii2";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&i2c {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};