ramips/rt288x,rt3883: Name DTS files based on scheme

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 162 deletions

diff --git a/target/linux/ramips/dts/HPM.dts b/target/linux/ramips/dts/HPM.dts
deleted file mode 100644
index 7ccd078144..0000000000
--- a/target/linux/ramips/dts/HPM.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-/dts-v1/;
-
-#include "rt3883.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "omnima,hpm", "ralink,rt3883-soc";
-	model = "Omnima HPM";
-
-	aliases {
-		led-boot = &led_status;
-		led-failsafe = &led_status;
-		led-running = &led_status;
-		led-upgrade = &led_status;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "hpm:orange:power";
-			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		led_status: status {
-			label = "hpm:green:status";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		eth {
-			label = "hpm:green:eth";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		};
-
-		eth2 {
-			label = "hpm:red:eth";
-			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-		};
-
-		wifi {
-			label = "hpm:green:wifi";
-			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-		};
-
-		wifi2 {
-			label = "hpm:red:wifi";
-			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-		/* gpio 12 and 13 handle the OC input */
-
-		usb0 {
-			gpio-export,name = "usb0";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb1 {
-			gpio-export,name = "usb1";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <25000000>;
-		reg = <0>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x0030000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@30000 {
-				reg = <0x00030000 0x00010000>;
-				label = "config";
-				read-only;
-			};
-
-			factory: partition@40000 {
-				reg = <0x00040000 0x00010000>;
-				label = "factory";
-				read-only;
-			};
-
-			partition@50000 {
-				compatible = "denx,uimage";
-				reg = <0x00050000 0x00fb0000>;
-				label = "firmware";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "i2c", "jtag", "uartf";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&ethernet {
-	phy-handle = <&phy0>;
-	phy-mode = "rgmii";
-	mtd-mac-address = <&factory 0x28>;
-
-	mdio-bus {
-		status = "okay";
-
-		phy0: ethernet-phy@4 {
-			reg = <4>;
-		};
-	};
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};