ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 191 deletions

diff --git a/target/linux/ramips/dts/DCH-M225.dts b/target/linux/ramips/dts/DCH-M225.dts
deleted file mode 100644
index 0644378ba2..0000000000
--- a/target/linux/ramips/dts/DCH-M225.dts
+++ /dev/null
@@ -1,191 +0,0 @@
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "dlink,dch-m225", "ralink,mt7620a-soc";
-	model = "D-Link DCH-M225";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "dch-m225:green:power";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		status {
-			label = "dch-m225:red:status";
-			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Audio-I2S";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink0_master>;
-		simple-audio-card,frame-master = <&dailink0_master>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphones";
-		simple-audio-card,routing =
-			"Headphones", "HP_L",
-			"Headphones", "HP_R";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,hp-det-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s>;
-		};
-
-		dailink0_master: simple-audio-card,codec {
-			sound-dai = <&codec>;
-		};
-	};
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&i2c {
-	status = "okay";
-
-	codec: wm8960@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-
-		wlf,shared-lrclk;
-	};
-};
-
-&i2s {
-	#sound-dai-cells = <0>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_refclk_pins>;
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <80000000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x4000>;
-				read-only;
-			};
-
-			factory: partition@34000 {
-				label = "factory";
-				reg = <0x34000 0x4000>;
-				read-only;
-			};
-
-			nvram: partition@38000 {
-				label = "nvram";
-				reg = <0x38000 0x8000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "devconf";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				label = "upgrade_rec";
-				reg = <0x50000 0x100000>;
-				read-only;
-			};
-
-			partition@150000 {
-				compatible = "seama";
-				label = "firmware";
-				reg = <0x150000 0x6b0000>;
-			};
-		};
-	};
-};
-
-&gdma {
-	status = "okay";
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "wdt", "rgmii1";
-			ralink,function = "gpio";
-		};
-
-		gpio_i2s {
-			ralink,group = "uartf";
-			ralink,function = "gpio i2s";
-		};
-	};
-};
-
-&ethernet {
-	mtd-mac-address = <&factory 0x4>;
-};
-
-&gsw {
-	ralink,port4 = "ephy";
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pa_pins>;
-};