ramips/rt288x,rt3883: Name DTS files based on scheme

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 180 deletions

diff --git a/target/linux/ramips/dts/BR-6475ND.dts b/target/linux/ramips/dts/BR-6475ND.dts
deleted file mode 100644
index f7fb8b5c40..0000000000
--- a/target/linux/ramips/dts/BR-6475ND.dts
+++ /dev/null
@@ -1,180 +0,0 @@
-/dts-v1/;
-
-#include "rt3883.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "edimax,br-6475nd", "ralink,rt3883-soc";
-	model = "Edimax BR-6475nD";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <KEY_RFKILL>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "br-6475nd:green:power";
-			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan {
-			label = "br-6475nd:amber:wlan";
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan_5ghz {
-			label = "br-6475nd:amber:wlan_5ghz";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	nor-flash@1c000000 {
-		compatible = "cfi-flash";
-		reg = <0x1c000000 0x800000>;
-		bank-width = <2>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x00000000 0x00030000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@30000 {
-				reg = <0x00030000 0x00010000>;
-				label = "nvram";
-				read-only;
-			};
-
-			factory: partition@40000 {
-				reg = <0x00040000 0x00010000>;
-				label = "factory";
-				read-only;
-			};
-
-			devdata: partition@50000 {
-				reg = <0x00050000 0x00020000>;
-				label = "devdata";
-				read-only;
-			};
-
-			partition@70000 {
-				compatible = "edimax,uimage";
-				reg = <0x00070000 0x00790000>;
-				label = "firmware";
-			};
-		};
-	};
-
-	rtl8367 {
-		compatible = "realtek,rtl8367";
-		gpio-sda = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		gpio-sck = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-		realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
-	};
-
-	/*
-	 * Unclear if this is the correct gpio setup; the USB ports are
-	 * unpopulated on a stock BR-6475nD, even though the hardware exists
-	 * and the headers are there.
-	 */
-	/*
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		usb {
-			gpio-export,name="usb";
-			gpio-export,output=<0>;
-			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-	*/
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "spi", "jtag", "uartf";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&timer {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&uartlite {
-	status = "okay";
-};
-
-&ethernet {
-	status = "okay";
-	mtd-mac-address = <&devdata 0x0d>;
-
-	port@0 {
-		mediatek,fixed-link = <1000 1 1 1>;
-	};
-};
-
-&wmac {
-	status = "okay";
-	ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pci {
-	status = "okay";
-};
-
-&pci1 {
-	status = "okay";
-
-	wifi@0,0 {
-		compatible = "pci0,0";
-		reg = <0x10000 0 0 0 0>;
-		ralink,5ghz = <0>;
-		ralink,mtd-eeprom = <&factory 0x8000>;
-	};
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};