ramips: move partitions into partition table node

Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>

1 files changed, 39 insertions, 35 deletions

diff --git a/target/linux/ramips/dts/ArcherC20v1.dts b/target/linux/ramips/dts/ArcherC20v1.dts
index dc5b99f4cb..70c6f84300 100644
--- a/target/linux/ramips/dts/ArcherC20v1.dts
+++ b/target/linux/ramips/dts/ArcherC20v1.dts
@@ -96,45 +96,49 @@
 	status = "okay";
 
 	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
 
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x20000>;
-			read-only;
-		};
-
-		partition@20000 {
-			label = "firmware";
-			reg = <0x20000 0x7a0000>;
-		};
-
-		partition@7c0000 {
-			label = "config";
-			reg = <0x7c0000 0x10000>;
-			read-only;
-		};
-
-		rom: partition@7d0000 {
-			label = "rom";
-			reg = <0x7d0000 0x10000>;
-			read-only;
-		};
-
-		partition@7e0000 {
-			label = "romfile";
-			reg = <0x7e0000 0x10000>;
-			read-only;
-		};
-
-		radio: partition@7f0000 {
-			label = "radio";
-			reg = <0x7f0000 0x10000>;
-			read-only;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x20000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "firmware";
+				reg = <0x20000 0x7a0000>;
+			};
+
+			partition@7c0000 {
+				label = "config";
+				reg = <0x7c0000 0x10000>;
+				read-only;
+			};
+
+			rom: partition@7d0000 {
+				label = "rom";
+				reg = <0x7d0000 0x10000>;
+				read-only;
+			};
+
+			partition@7e0000 {
+				label = "romfile";
+				reg = <0x7e0000 0x10000>;
+				read-only;
+			};
+
+			radio: partition@7f0000 {
+				label = "radio";
+				reg = <0x7f0000 0x10000>;
+				read-only;
+			};
 		};
 	};
 };