diff options
| author | Thomas Vincent-Cross <me@tvc.id.au> | 2018-10-23 02:21:16 +1100 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-11-28 00:50:35 +0100 |
| commit | a160f50d4f240019fafe95e80701ebb871c788fe (patch) | |
| tree | 5d7badd6dbe43f0c543dbdf3f65f0d6052d2248a /target/linux/ramips/base-files | |
| parent | 31469aebd4c737ba891ceffc58db59c6b039445c (diff) | |
| download | upstream-a160f50d4f240019fafe95e80701ebb871c788fe.tar.gz upstream-a160f50d4f240019fafe95e80701ebb871c788fe.tar.bz2 upstream-a160f50d4f240019fafe95e80701ebb871c788fe.zip | |
ramips: add support for Wavlink WL-WN570HA1
This commit adds support for the Wavlink WL-WN570HA1, a dual-band PoE
wireless router with the following specifications:
- CPU: MediaTek MT7688AN 580MHz
- Flash: 8MB
- RAM: 64MB
- Ethernet: 1x 10/100Mbps
- 2.4 GHz: 802.11b/g/n SoC, 1T1R, 27 dBm
- 5 GHz: 802.11a/n/ac MT7610E, 1T1R, 25 dBm
- Antennas: 2x external (1 per radio), detachable
- LEDs: 3 programmable + Wi-Fi, WAN/LAN, Power
- Buttons: Reset
Flashing instructions:
Factory U-boot launches a TFTP client if reset button is pressed during power-on.
Rename the sysupgrade file and configure TFTP as follows:
- Client (WL-WN570HA1) IP: 192.168.10.101
- Server IP: 192.168.10.100
- Filename: firmware.bin
Signed-off-by: Thomas Vincent-Cross <me@tvc.id.au>
[use generic board detection, add firmware partition compatible]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/base-files')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 8 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 |
3 files changed, 10 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index fb288de09b..4330254c8f 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -370,6 +370,14 @@ vocore-16M) w502u) set_wifi_led "rt2800pci-phy0::radio" ;; +wavlink,wl-wn570ha1) + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49" + ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84" + ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100" + set_wifi_led "$boardname:green:wifi" + ;; we1026-5g-16m) ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0" set_wifi_led "we1026-5g:green:wifi" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 6f60683fc2..cdba37d38f 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -117,6 +117,7 @@ ramips_setup_interfaces() sk-wb8|\ u7621-06-256M-16M|\ vr500|\ + wavlink,wl-wn570ha1|\ wf-2881|\ whr-g300n|\ mqmaker,witi-256m|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index e4ddc0eec4..fc73f37e29 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -178,6 +178,7 @@ platform_check_image() { w306r-v20|\ w502u|\ ravpower,wd03|\ + wavlink,wl-wn570ha1|\ wf-2881|\ whr-1166d|\ whr-300hp2|\ |