diff options
| author | Daniel Danzberger <daniel@dd-wrt.com> | 2019-07-22 12:54:06 +0200 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-09-20 11:36:27 +0200 |
| commit | 10c5d3dd5f52e15204b8446068d5fc55e02d2029 (patch) | |
| tree | d42c2d6244ba01f57a8e3b54008b17e75e0cc9c4 /target/linux/ramips/base-files/etc | |
| parent | fde8e2e035f74ed6e21b3aaf8f24a094b1dd9dc4 (diff) | |
| download | upstream-10c5d3dd5f52e15204b8446068d5fc55e02d2029.tar.gz upstream-10c5d3dd5f52e15204b8446068d5fc55e02d2029.tar.bz2 upstream-10c5d3dd5f52e15204b8446068d5fc55e02d2029.zip | |
ramips: mt7621: Add new device AsiaRF AP7621-NV1
SoC: Mediatek MT7621A
CPU: 4x 880Mhz
Cache: 32 KB I-Cache and 32 KB D-Cach
256 KB L2 Cache (shared by Dual-Core)
RAM: DDR3 512MB 16bits BUS
FLASH: 16MB
Switch: Mediatek Gigabit Switch (2 x LAN, 1 x WAN)
POE: (1x PD, 2x PSE)
USB: 1x 3.0
PCI: 3x Mini PCIe (3 USB2.0 + 2 x UIM interface)
GPS: Quectel L70B
SIM: 2 Slots
BTN: Reset
LED: - Power
- Ethernet
- Wifi
- USB
UART: UART is present as Pads with throughholes on the PCB.
They are located on left side.
3.3V - RX - GND - TX / 57600-8N1
3.3V is the square pad
Installation
------------
The stock image is a modified openwrt and can be overflashed via sysupgrade -F
Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
[merge conflict in mt7621.mk]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 7fc7717ba4..7ab5653d09 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -226,6 +226,9 @@ ramips_setup_interfaces() asiarf,ap7621-001) ucidef_add_switch "switch0" "0:lan" "4:wan" "6@eth0" ;; + asiarf,ap7621-nv1) + ucidef_add_switch "switch0" "0:wan" "2:lan" "3:lan" "6@eth0" + ;; asiarf,awapn2403) ucidef_add_switch "switch0" \ "0:lan" "1:wan" "6@eth0" |