mvebu: remove obsolete Kernel 5.4

With the upgrade to Kernel 5.10 per default the old version is no longer
required to be in tree.

Signed-off-by: Paul Spooren <mail@aparcar.org>

1 files changed, 0 insertions, 57 deletions

diff --git a/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch b/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
deleted file mode 100644
index 9c71225ffe..0000000000
--- a/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From df749cdb015011e9ed8b60ebb84b4e76a9f35735 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
-Date: Thu, 30 Apr 2020 10:06:24 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe comphy handle
- property
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move the comphy handle property of the PCIe node from board specific
-device tree files (EspressoBin and Turris Mox) to the generic
-armada-37xx.dtsi.
-
-This is correct since this is the only possible PCIe PHY configuration
-on Armada 37xx, so when PCIe is enabled on any board, this handle is
-correct.
-
-Signed-off-by: Marek Behún <marek.behun@nic.cz>
-Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 -
- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts   | 1 -
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi             | 1 +
- 3 files changed, 1 insertion(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -56,7 +56,6 @@
- /* J9 */
- &pcie0 {
- 	status = "okay";
--	phys = <&comphy1 0>;
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
- 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-@@ -133,7 +133,6 @@
- 	status = "okay";
- 	max-link-speed = <2>;
- 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
--	phys = <&comphy1 0>;
- 	/*
- 	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
- 	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -501,6 +501,7 @@
- 					<0 0 0 2 &pcie_intc 1>,
- 					<0 0 0 3 &pcie_intc 2>,
- 					<0 0 0 4 &pcie_intc 3>;
-+			phys = <&comphy1 0>;
- 			pcie_intc: interrupt-controller {
- 				interrupt-controller;
- 				#interrupt-cells = <1>;