mvebu: copy 5.10 patches to 5.15

Linux 5.15 on Marvell EBU, here we go!

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

1 files changed, 65 insertions, 0 deletions

diff --git a/target/linux/mvebu/patches-5.15/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch b/target/linux/mvebu/patches-5.15/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
new file mode 100644
index 0000000000..c3abae60a6
--- /dev/null
+++ b/target/linux/mvebu/patches-5.15/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
@@ -0,0 +1,65 @@
+From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001
+From: Tomasz Maciej Nowak <tmn505@gmail.com>
+Date: Tue, 10 Nov 2020 16:38:31 +0100
+Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED
+
+With board revision 1.3, SolidRun moved the power LED to the middle of
+the board. In old place of power LED a GPIO controllable heartbeat LED
+was added. This commit only touches Single Shot variant, since only this
+variant is all revision 1.3.
+
+Note:
+This is slightly modified patch. Some boards could be placed in an
+enclosure, so the LED18 is enabled by default, since that'll be the only
+visible indicator that the board is operating.
+
+Reported-by: Alexandra Alth <alexandra@alth.de>
+Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+---
+ .../marvell/armada-8040-mcbin-singleshot.dts  | 22 +++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+
+--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
++++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
+@@ -5,6 +5,8 @@
+  * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+  */
+ 
++#include <dt-bindings/leds/common.h>
++
+ #include "armada-8040-mcbin.dtsi"
+ 
+ / {
+@@ -12,6 +14,20 @@
+ 	compatible = "marvell,armada8040-mcbin-singleshot",
+ 			"marvell,armada8040-mcbin", "marvell,armada8040",
+ 			"marvell,armada-ap806-quad", "marvell,armada-ap806";
++
++	leds {
++		compatible = "gpio-leds";
++		pinctrl-0 = <&cp0_led18_pins>;
++		pinctrl-names = "default";
++
++		led18 {
++			gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
++			function = LED_FUNCTION_HEARTBEAT;
++			color = <LED_COLOR_ID_GREEN>;
++			linux,default-trigger = "heartbeat";
++			default-state = "on";
++		};
++	};
+ };
+ 
+ &cp0_eth0 {
+@@ -27,3 +43,10 @@
+ 	managed = "in-band-status";
+ 	sfp = <&sfp_eth1>;
+ };
++
++&cp0_pinctrl {
++	cp0_led18_pins: led18-pins {
++		marvell,pins = "mpp33";
++		marvell,function = "gpio";
++	};
++};