diff options
| author | Alberto Bursi <bobafetthotmail@gmail.com> | 2020-07-12 15:35:54 +0200 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-07-17 11:00:33 +0200 |
| commit | 480003e9eb0dac5dba032fbce64c35c34ff386ce (patch) | |
| tree | 5564d575909f1a7f138edce3f32fd33ae0e32652 /target/linux/mvebu/patches-4.19 | |
| parent | f013cc4b26890bd71bf8fe4010beae0cbfd16d10 (diff) | |
| download | upstream-480003e9eb0dac5dba032fbce64c35c34ff386ce.tar.gz upstream-480003e9eb0dac5dba032fbce64c35c34ff386ce.tar.bz2 upstream-480003e9eb0dac5dba032fbce64c35c34ff386ce.zip | |
mvebu: add Kobol Helios 4 device
The Helios 4 is a NAS from Kobol
that is powered by an Armada 38x
MicroSOM from Solidrun, similarly
to Clearfog.
This device has:
-Armada 38x CPU
(dual core ARMv7 1.6 Ghz)
-2 GB of ECC RAM
-Gigabit ethernet (Marvell)
-2x USB 3.0 ports
-4x Sata 3.0 ports
-i2c header (J9 |>GND|SDA|SCL|VCC)
-2x 3-pin fan headers with PWM
-micro-usb port is a TTL/UART to
USB converter connected to TTL
-MicroSD card slot
-System, 4xSata and 1xUSB LEDs
NOT WORKING: fan control
Fan Control requires a kernel patch
that is available in the Armbian
project (the "default firmware"
of this device) and named
mvebu-gpio-remove-hardcoded
-timer-assignment
This patch isn't acceptable
by OpenWrt, it should be upstreamed.
I also have that patch in my own
local OpenWrt builds,
in case you want a more
clean and less confusing patch
for upstreaming.
To install, write the disk image
on a micro SD card with dd or
win32 disk imager, insert the
card in the slot.
Check that the dip switch battery
for boot selection is as follows
Switch 1 and 2 down/off, switches
3, 4, 5 up/on.
Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
Diffstat (limited to 'target/linux/mvebu/patches-4.19')
| -rw-r--r-- | target/linux/mvebu/patches-4.19/560-helios4-dts-status-led-alias.patch | 28 | ||||
| -rw-r--r-- | target/linux/mvebu/patches-4.19/561-mvebu-armada-38x-enable-libata-leds.patch | 10 |
2 files changed, 38 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-4.19/560-helios4-dts-status-led-alias.patch b/target/linux/mvebu/patches-4.19/560-helios4-dts-status-led-alias.patch new file mode 100644 index 0000000000..4c4fbec764 --- /dev/null +++ b/target/linux/mvebu/patches-4.19/560-helios4-dts-status-led-alias.patch @@ -0,0 +1,28 @@ +--- a/arch/arm/boot/dts/armada-388-helios4.dts ++++ b/arch/arm/boot/dts/armada-388-helios4.dts +@@ -15,6 +15,13 @@ + model = "Helios4"; + compatible = "kobol,helios4", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; ++ ++ aliases { ++ led-boot = &led_status; ++ led-failsafe = &led_status; ++ led-running = &led_status; ++ led-upgrade = &led_status; ++ }; + + memory { + device_type = "memory"; +@@ -70,10 +77,9 @@ + + system-leds { + compatible = "gpio-leds"; +- status-led { ++ led_status: status-led { + label = "helios4:green:status"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + diff --git a/target/linux/mvebu/patches-4.19/561-mvebu-armada-38x-enable-libata-leds.patch b/target/linux/mvebu/patches-4.19/561-mvebu-armada-38x-enable-libata-leds.patch new file mode 100644 index 0000000000..3f9ad364de --- /dev/null +++ b/target/linux/mvebu/patches-4.19/561-mvebu-armada-38x-enable-libata-leds.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/mach-mvebu/Kconfig ++++ b/arch/arm/mach-mvebu/Kconfig +@@ -68,6 +68,7 @@ + select HAVE_SMP + select MACH_MVEBU_V7 + select PINCTRL_ARMADA_38X ++ select ARCH_WANT_LIBATA_LEDS + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 380/385 SoC with device tree. |