mvebu: refresh patches

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>

1 files changed, 0 insertions, 162 deletions

diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
deleted file mode 100644
index 5b722b4f83..0000000000
--- a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device tree for the uDPU board.
- * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
- * Copyright (C) 2016 Marvell
- * Copyright (C) 2019 Methode Electronics
- * Copyright (C) 2019 Telus
- *
- * Vladimir Vid <vladimir.vid@sartura.hr>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
-
-/ {
-	model = "Methode uDPU Board";
-	compatible = "methode,udpu", "marvell,armada3720";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		compatible = "gpio-leds";
-
-		power1 {
-			label = "udpu:green:power";
-			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
-		};
-
-		power2 {
-			label = "udpu:red:power";
-			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
-		};
-
-		network1 {
-			label = "udpu:green:network";
-			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
-		};
-
-		network2 {
-			label = "udpu:red:network";
-			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
-		};
-
-		alarm1 {
-			label = "udpu:green:alarm";
-			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
-		};
-
-		alarm2 {
-			label = "udpu:red:alarm";
-			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sfp_eth0: sfp-eth0 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	sfp_eth1: sfp-eth1 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&sdhci0 {
-	status = "okay";
-	bus-width = <8>;
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-	marvell,pad-type = "fixed-1-8v";
-	non-removable;
-	no-sd;
-	no-sdio;
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_quad_pins>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/* only bootloader is located on the SPI */
-			partition@0 {
-				label = "uboot";
-				reg = <0 0x400000>;
-			};
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	lm75@48 {
-		status = "okay";
-		compatible = "lm75";
-		reg = <0x48>;
-	};
-
-	lm75@49 {
-		status = "okay";
-		compatible = "lm75";
-		reg = <0x49>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	phy-mode = "sgmii";
-	managed = "in-band-status";
-	sfp = <&sfp_eth0>;
-};
-
-&eth1 {
-	status = "okay";
-	phy-mode = "sgmii";
-	managed = "in-band-status";
-	sfp = <&sfp_eth1>;
-};
-
-&usb3 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};