diff options
| author | Tomasz Maciej Nowak <tomek_n@o2.pl> | 2018-03-07 22:10:02 +0100 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2018-03-10 01:15:22 +0100 |
| commit | 584d7c53bd2d286a71fe5e8244624f59c529cb26 (patch) | |
| tree | f03f34a0d88192cd2487791d6bc28e70f0ee50fe /target/linux/mvebu/Makefile | |
| parent | be3da900cdac3640398ed60f62bb445269aa8b50 (diff) | |
| download | upstream-584d7c53bd2d286a71fe5e8244624f59c529cb26.tar.gz upstream-584d7c53bd2d286a71fe5e8244624f59c529cb26.tar.bz2 upstream-584d7c53bd2d286a71fe5e8244624f59c529cb26.zip | |
mvebu: new subtarget cortex A53
This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.
The first device is Globalscale ESPRESSObin. Some hardware specs:
SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
µSD card slot with footprint for an optional 4GB EMMC
4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
USB 2.0
µUSB port connected to PL2303SA (USB to serial bridge
controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
I2C, GPIOs, PWM, UART, SPI, MMC, etc
MiniPCIe slot
Misc: Reset button, JTAG interface
Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:
1. Interrupt boot process to run U-Boot command line,
2. Run following commands:
(for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
saveenv
(for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
saveenv
3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
Diffstat (limited to 'target/linux/mvebu/Makefile')
| -rw-r--r-- | target/linux/mvebu/Makefile | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/target/linux/mvebu/Makefile b/target/linux/mvebu/Makefile index 93491954ab..0afc5771c2 100644 --- a/target/linux/mvebu/Makefile +++ b/target/linux/mvebu/Makefile @@ -7,9 +7,9 @@ include $(TOPDIR)/rules.mk BOARD:=mvebu -BOARDNAME:=Marvell Armada 37x/38x/XP +BOARDNAME:=Marvell EBU Armada FEATURES:=fpu usb pci pcie gpio nand squashfs ramdisk -SUBTARGETS:=cortexa9 +SUBTARGETS:=cortexa9 cortexa53 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org> KERNEL_PATCHVER:=4.14 |