diff options
author | Richard Huynh <voxlympha@gmail.com> | 2021-12-01 12:27:39 +1100 |
---|---|---|
committer | Daniel Golle <daniel@makrotopia.org> | 2022-03-21 13:11:56 +0000 |
commit | 9470160c350d15f765c33d6c1db15d6c4709a64c (patch) | |
tree | ae873db7b8cf9bd12f005e922a8c2dfc03ec6477 /target/linux/layerscape/patches-5.4/302-dts-0122-arm64-dts-ls1043a-remove-thermal-zone-5-from-dts.patch | |
parent | 4b51fa0d808fef51bbb1550f9d971b1faeea0643 (diff) | |
download | upstream-9470160c350d15f765c33d6c1db15d6c4709a64c.tar.gz upstream-9470160c350d15f765c33d6c1db15d6c4709a64c.tar.bz2 upstream-9470160c350d15f765c33d6c1db15d6c4709a64c.zip |
mediatek: Add support for Xiaomi Redmi Router AX6S
Also known as the "Xiaomi Router AX3200" in western markets,
but only the AX6S is widely installation-capable at this time.
SoC: MediaTek MT7622B
RAM: DDR3 256 MiB (ESMT M15T2G16128A)
Flash: SPI-NAND 128 MiB (ESMT F50L1G41LB or Gigadevice GD5F1GQ5xExxG)
WLAN: 2.4/5 GHz 4T4R
2.4 GHz: MediaTek MT7622B
5 GHz: MediaTek MT7915E
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531B
LEDs/Keys: 2/2 (Internet + System LED, Mesh button + Reset pin)
UART: Marked J1 on board VCC RX GND TX, beginning from "1". 3.3v, 115200n8
Power: 12 VDC, 1.5 A
Notes:
U-Boot passes through the ethaddr from uboot-env partition,
but also has been known to reset it to a generic mac address
hardcoded in the bootloader.
However, bdata is also populated with the ethernet mac addresses,
but is also typically never written to. Thus this is used instead.
Installation:
1. Flash stock Xiaomi "closed beta" image labelled
'miwifi_rb03_firmware_stable_1.2.7_closedbeta.bin'.
(MD5: 5eedf1632ac97bb5a6bb072c08603ed7)
2. Calculate telnet password from serial number and login
3. Execute commands to prepare device
nvram set ssh_en=1
nvram set uart_en=1
nvram set boot_wait=on
nvram set flag_boot_success=1
nvram set flag_try_sys1_failed=0
nvram set flag_try_sys2_failed=0
nvram commit
4. Download and flash image
On computer:
python -m http.server
On router:
cd /tmp
wget http://<IP>:8000/factory.bin
mtd -r write factory.bin firmware
Device should reboot at this point.
Reverting to stock:
Stock Xiaomi recovery tftp that accepts their signed images,
with default ips of 192.168.31.1 + 192.168.31.100.
Stock image should be renamed to tftp server ip in hex (Eg. C0A81F64.img)
Triggered by holding reset pin on powerup.
A simple implementation of this would be via dnsmasq's
dhcp-boot option or using the vendor's (Windows only)
recovery tool available on their website.
Signed-off-by: Richard Huynh <voxlympha@gmail.com>
(cherry picked from commit 9f9477b2751231d57cdd8c227149b88c93491d93)
Diffstat (limited to 'target/linux/layerscape/patches-5.4/302-dts-0122-arm64-dts-ls1043a-remove-thermal-zone-5-from-dts.patch')
0 files changed, 0 insertions, 0 deletions