layerscape: add 64b/32b target for ls1046ardb device

Add support for NXP layerscape ls1046ardb 64b/32b Dev board.

LS1046ARDB Specification:
-------------------------
Memory subsystem:
* 8GByte DDR4 SDRAM (64bit bus)
* 512 Mbyte NAND flash
* Two 64 Mbyte high-speed SPI flash
* SD connector to interface with the SD memory card
* On-board 4G eMMC
Ethernet:
* Two XFI 10G ports
* Two SGMII ports
* Two RGMII ports
PCIe:
* PCIe1 (SerDes2 Lane0) to miniPCIe slot
* PCIe2 (SerDes2 Lane1) to x2 PCIe slot
* PCIe3 (SerDes2 Lane2) to x4 PCIe slot

* USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port
* UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>

1 files changed, 53 insertions, 0 deletions

diff --git a/target/linux/layerscape/patches-4.4/8130-ls1046a-sata-Add-LS1046A-sata-support.patch b/target/linux/layerscape/patches-4.4/8130-ls1046a-sata-Add-LS1046A-sata-support.patch
new file mode 100644
index 0000000000..ea384e6bd9
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8130-ls1046a-sata-Add-LS1046A-sata-support.patch
@@ -0,0 +1,53 @@
+From 5cd461cd17c3e27e5501e499d5d865b60ee58257 Mon Sep 17 00:00:00 2001
+From: Gong Qianyu <Qianyu.Gong@nxp.com>
+Date: Mon, 26 Sep 2016 12:29:24 +0800
+Subject: [PATCH 130/141] ls1046a/sata: Add LS1046A sata support
+
+Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
+Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
+Integated-by: Yutang Jiang <yutang.jiang@nxp.com>
+---
+ drivers/ata/ahci_qoriq.c |   13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/drivers/ata/ahci_qoriq.c
++++ b/drivers/ata/ahci_qoriq.c
+@@ -40,11 +40,16 @@
+ #define AHCI_PORT_PHY_5_CFG	0x192c96a4
+ #define AHCI_PORT_TRANS_CFG	0x08000025
+ 
++/* for ls1046a */
++#define LS1046A_PORT_PHY2	0x28184d1f
++#define LS1046A_PORT_PHY3	0x0e081509
++
+ #define SATA_ECC_DISABLE	0x00020000
+ 
+ enum ahci_qoriq_type {
+ 	AHCI_LS1021A,
+ 	AHCI_LS1043A,
++	AHCI_LS1046A,
+ 	AHCI_LS2080A,
+ };
+ 
+@@ -57,6 +62,7 @@ struct ahci_qoriq_priv {
+ static const struct of_device_id ahci_qoriq_of_match[] = {
+ 	{ .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A},
+ 	{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
++	{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
+ 	{ .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A},
+ 	{},
+ };
+@@ -158,6 +164,13 @@ static int ahci_qoriq_phy_init(struct ah
+ 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+ 		break;
+ 
++	case AHCI_LS1046A:
++		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
++		writel(LS1046A_PORT_PHY2, reg_base + PORT_PHY2);
++		writel(LS1046A_PORT_PHY3, reg_base + PORT_PHY3);
++		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
++		break;
++
+ 	case AHCI_LS1043A:
+ 	case AHCI_LS2080A:
+ 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);