layerscape: add 64b/32b target for ls1012ardb device

The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>

1 files changed, 29 insertions, 0 deletions

diff --git a/target/linux/layerscape/patches-4.4/1112-driver-spi-fsl-quad-Hang-memcpy-Unhandled-fault-alig.patch b/target/linux/layerscape/patches-4.4/1112-driver-spi-fsl-quad-Hang-memcpy-Unhandled-fault-alig.patch
new file mode 100644
index 0000000000..c6311fc4bb
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/1112-driver-spi-fsl-quad-Hang-memcpy-Unhandled-fault-alig.patch
@@ -0,0 +1,29 @@
+From f1b7824a42505669476f203e126fc26dd1006af2 Mon Sep 17 00:00:00 2001
+From: Yutang Jiang <yutang.jiang@nxp.com>
+Date: Fri, 9 Sep 2016 22:57:55 +0800
+Subject: [PATCH 112/113] driver: spi: fsl-quad: Hang memcpy: Unhandled fault:
+ alignment fault
+
+vmap/iomap based on whether the buffer is in memory region or reserved region.
+However, both map it as non-cacheable memory.
+For armv8 specifically, non-cacheable mapping requests use a memory type
+that has to be accessed aligned to the request size. memcpy() doesn't guarantee
+that. memcpy_toio() can guarantee 4-bytes alignment.
+
+Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>
+Integrated-by: Yutang Jiang <yutang.jiang@nxp.com>
+---
+ drivers/mtd/spi-nor/fsl-quadspi.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/mtd/spi-nor/fsl-quadspi.c
++++ b/drivers/mtd/spi-nor/fsl-quadspi.c
+@@ -1103,7 +1103,7 @@ static ssize_t fsl_qspi_read(struct spi_
+ 		len);
+ 
+ 	/* Read out the data directly from the AHB buffer.*/
+-	memcpy(buf, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs,
++	memcpy_toio(buf, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs,
+ 		len);
+ 
+ 	return len;