kernel: bump 4.14 to 4.14.154

Refreshed all patches.

Altered patches:
- 902-debloat_proc.patch
- 040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch
- 807-usb-support-layerscape.patch
- 809-flexcan-support-layerscape.patch
- 816-pcie-support-layerscape.patch

Remove upstreamed:
- 303-spi-nor-enable-4B-opcodes-for-mx66l51235l.patch

New symbols:
X86_INTEL_MPX
X86_INTEL_MEMORY_PROTECTION_KEYS
CONFIG_X86_INTEL_TSX_MODE_OFF
X86_INTEL_TSX_MODE_ON
X86_INTEL_TSX_MODE_AUTO
SGL_ALLOC

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

1 files changed, 16 insertions, 39 deletions

diff --git a/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch b/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch
index 70bc3b32aa..34a86b56bb 100644
--- a/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch
+++ b/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch
@@ -217,7 +217,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  }
  
  static void __dwc3_set_mode(struct work_struct *work)
-@@ -766,6 +810,96 @@ static void dwc3_core_setup_global_contr
+@@ -765,6 +809,96 @@ static void dwc3_core_setup_global_contr
  static int dwc3_core_get_phy(struct dwc3 *dwc);
  static int dwc3_core_ulpi_init(struct dwc3 *dwc);
  
@@ -314,7 +314,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  /**
   * dwc3_core_init - Low-level initialization of DWC3 Core
   * @dwc: Pointer to our controller context structure
-@@ -828,6 +962,8 @@ static int dwc3_core_init(struct dwc3 *d
+@@ -827,6 +961,8 @@ static int dwc3_core_init(struct dwc3 *d
  	/* Adjust Frame Length */
  	dwc3_frame_length_adjustment(dwc);
  
@@ -323,7 +323,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  	usb_phy_set_suspend(dwc->usb2_phy, 0);
  	usb_phy_set_suspend(dwc->usb3_phy, 0);
  	ret = phy_power_on(dwc->usb2_generic_phy);
-@@ -871,6 +1007,22 @@ static int dwc3_core_init(struct dwc3 *d
+@@ -870,6 +1006,22 @@ static int dwc3_core_init(struct dwc3 *d
  		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
  	}
  
@@ -346,7 +346,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  	return 0;
  
  err4:
-@@ -1074,6 +1226,8 @@ static void dwc3_get_properties(struct d
+@@ -1073,6 +1225,8 @@ static void dwc3_get_properties(struct d
  				&hird_threshold);
  	dwc->usb3_lpm_capable = device_property_read_bool(dev,
  				"snps,usb3_lpm_capable");
@@ -355,7 +355,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  
  	dwc->disable_scramble_quirk = device_property_read_bool(dev,
  				"snps,disable_scramble_quirk");
-@@ -1106,8 +1260,16 @@ static void dwc3_get_properties(struct d
+@@ -1105,8 +1259,16 @@ static void dwc3_get_properties(struct d
  	dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
  				"snps,dis-tx-ipgap-linecheck-quirk");
  
@@ -372,9 +372,9 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  	device_property_read_u8(dev, "snps,tx_de_emphasis",
  				&tx_de_emphasis);
  	device_property_read_string(dev, "snps,hsphy_interface",
-@@ -1115,6 +1277,9 @@ static void dwc3_get_properties(struct d
- 	device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
- 				 &dwc->fladj);
+@@ -1117,6 +1279,9 @@ static void dwc3_get_properties(struct d
+ 	dwc->dis_metastability_quirk = device_property_read_bool(dev,
+ 				"snps,dis_metastability_quirk");
  
 +	dwc->host_vbus_glitches = device_property_read_bool(dev,
 +				"snps,host-vbus-glitches");
@@ -382,7 +382,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
  	dwc->tx_de_emphasis = tx_de_emphasis;
  
-@@ -1365,12 +1530,14 @@ static int dwc3_resume_common(struct dwc
+@@ -1367,12 +1532,14 @@ static int dwc3_resume_common(struct dwc
  
  	switch (dwc->dr_mode) {
  	case USB_DR_MODE_PERIPHERAL:
@@ -473,21 +473,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
   * @disable_scramble_quirk: set if we enable the disable scramble quirk
   * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
   * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
-@@ -869,6 +908,13 @@ struct dwc3_scratchpad_array {
-  * 	1	- -3.5dB de-emphasis
-  * 	2	- No de-emphasis
-  * 	3	- Reserved
-+ * @disable_devinit_u1u2_quirk: disable device-initiated U1/U2 request.
-+ * @quirk_reverse_in_out: prevent tx fifo reverse the data direction
-+ * @quirk_stop_transfer_in_block: prevent block transmission from being
-+ *				interrupted
-+ * @quirk_stop_ep_in_u1: replace stop commad with disable slot command
-+ * @host-vbus-glitches: set to avoid vbus glitch during
-+ *                      xhci reset.
-  * @imod_interval: set the interrupt moderation interval in 250ns
-  *                 increments or 0 to disable.
-  */
-@@ -921,6 +967,12 @@ struct dwc3 {
+@@ -922,6 +961,12 @@ struct dwc3 {
  	enum usb_phy_interface	hsphy_mode;
  
  	u32			fladj;
@@ -500,7 +486,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  	u32			irq_gadget;
  	u32			nr_scratch;
  	u32			u1u2;
-@@ -1005,6 +1057,7 @@ struct dwc3 {
+@@ -1006,6 +1051,7 @@ struct dwc3 {
  	unsigned		setup_packet_pending:1;
  	unsigned		three_stage_setup:1;
  	unsigned		usb3_lpm_capable:1;
@@ -508,7 +494,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  
  	unsigned		disable_scramble_quirk:1;
  	unsigned		u2exit_lfps_quirk:1;
-@@ -1024,6 +1077,11 @@ struct dwc3 {
+@@ -1025,6 +1071,11 @@ struct dwc3 {
  
  	unsigned		tx_de_emphasis_quirk:1;
  	unsigned		tx_de_emphasis:2;
@@ -518,8 +504,8 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
 +	unsigned                quirk_stop_ep_in_u1:1;
 +	unsigned		host_vbus_glitches:1;
  
- 	u16			imod_interval;
- };
+ 	unsigned		dis_metastability_quirk:1;
+ 
 --- a/drivers/usb/dwc3/ep0.c
 +++ b/drivers/usb/dwc3/ep0.c
 @@ -391,7 +391,7 @@ static int dwc3_ep0_handle_u1(struct dwc
@@ -542,7 +528,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  		reg &= ~DWC3_DCTL_INITU2ENA;
 --- a/drivers/usb/dwc3/gadget.c
 +++ b/drivers/usb/dwc3/gadget.c
-@@ -3210,6 +3210,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
+@@ -3211,6 +3211,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
  {
  	int ret;
  	int irq;
@@ -550,7 +536,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  
  	irq = dwc3_gadget_get_irq(dwc);
  	if (irq < 0) {
-@@ -3288,6 +3289,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
+@@ -3290,6 +3291,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
  
  	dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
  
@@ -754,15 +740,6 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
  	/* DR has been stopped in usb_gadget_unregister_driver() */
  	remove_proc_file();
  
-@@ -2569,7 +2579,7 @@ static int fsl_udc_remove(struct platfor
- 	dma_pool_destroy(udc_controller->td_pool);
- 	free_irq(udc_controller->irq, udc_controller);
- 	iounmap(dr_regs);
--	if (pdata->operating_mode == FSL_USB2_DR_DEVICE)
-+	if (res && (pdata->operating_mode == FSL_USB2_DR_DEVICE))
- 		release_mem_region(res->start, resource_size(res));
- 
- 	/* free udc --wait for the release() finished */
 --- a/drivers/usb/gadget/udc/fsl_usb2_udc.h
 +++ b/drivers/usb/gadget/udc/fsl_usb2_udc.h
 @@ -20,6 +20,10 @@