lantiq: remove 3.18 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47774

46 files changed, 0 insertions, 20339 deletions

diff --git a/target/linux/lantiq/config-3.18 b/target/linux/lantiq/config-3.18
deleted file mode 100644
index 9824b37cd7..0000000000
--- a/target/linux/lantiq/config-3.18
+++ /dev/null
@@ -1,161 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_DT_EASY50712=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_MM_LANTIQ=y
-CONFIG_GPIO_STP_XWAY=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_LANTIQ=y
-CONFIG_LANTIQ_ETOP=y
-# CONFIG_LANTIQ_PHY is not set
-CONFIG_LANTIQ_WDT=y
-# CONFIG_LANTIQ_XRX200 is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_LANTIQ=y
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_NAND_XWAY is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PCIE_LANTIQ is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LANTIQ=y
-CONFIG_PERCPU_RWSEM=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_LANTIQ=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_XWAY=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PSB6970_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366_SMI=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_LANTIQ=y
-# CONFIG_SOC_AMAZON_SE is not set
-# CONFIG_SOC_FALCON is not set
-CONFIG_SOC_TYPE_XWAY=y
-CONFIG_SOC_XWAY=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USE_OF=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/lantiq/patches-3.18/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-3.18/0001-MIPS-lantiq-add-pcie-driver.patch
deleted file mode 100644
index e47bfa4d4e..0000000000
--- a/target/linux/lantiq/patches-3.18/0001-MIPS-lantiq-add-pcie-driver.patch
+++ /dev/null
@@ -1,5540 +0,0 @@
-From 6f933347d0b4ed02d9534f5fa07f7b99f13eeaa1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:12:28 +0200
-Subject: [PATCH 01/36] MIPS: lantiq: add pcie driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/Kconfig           |   10 +
- arch/mips/lantiq/xway/sysctrl.c    |    2 +
- arch/mips/pci/Makefile             |    2 +
- arch/mips/pci/fixup-lantiq-pcie.c  |   82 +++
- arch/mips/pci/fixup-lantiq.c       |    5 +-
- arch/mips/pci/ifxmips_pci_common.h |   57 ++
- arch/mips/pci/ifxmips_pcie.c       | 1099 ++++++++++++++++++++++++++++++
- arch/mips/pci/ifxmips_pcie.h       |  135 ++++
- arch/mips/pci/ifxmips_pcie_ar10.h  |  290 ++++++++
- arch/mips/pci/ifxmips_pcie_msi.c   |  392 +++++++++++
- arch/mips/pci/ifxmips_pcie_phy.c   |  478 +++++++++++++
- arch/mips/pci/ifxmips_pcie_pm.c    |  176 +++++
- arch/mips/pci/ifxmips_pcie_pm.h    |   36 +
- arch/mips/pci/ifxmips_pcie_reg.h   | 1001 +++++++++++++++++++++++++++
- arch/mips/pci/ifxmips_pcie_vr9.h   |  271 ++++++++
- arch/mips/pci/pci.c                |   25 +
- arch/mips/pci/pcie-lantiq.h        | 1305 ++++++++++++++++++++++++++++++++++++
- drivers/pci/pcie/aer/Kconfig       |    2 +-
- include/linux/pci.h                |    2 +
- include/linux/pci_ids.h            |    6 +
- 20 files changed, 5374 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c
- create mode 100644 arch/mips/pci/ifxmips_pci_common.h
- create mode 100644 arch/mips/pci/ifxmips_pcie.c
- create mode 100644 arch/mips/pci/ifxmips_pcie.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_ar10.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_msi.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_phy.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_pm.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_pm.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_reg.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h
- create mode 100644 arch/mips/pci/pcie-lantiq.h
-
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -17,6 +17,7 @@ config SOC_XWAY
- 	bool "XWAY"
- 	select SOC_TYPE_XWAY
- 	select HW_HAS_PCI
-+	select ARCH_SUPPORTS_MSI
- 
- config SOC_FALCON
- 	bool "FALCON"
-@@ -37,6 +38,15 @@ config PCI_LANTIQ
- 	bool "PCI Support"
- 	depends on SOC_XWAY && PCI
- 
-+config PCIE_LANTIQ
-+	bool "PCIE Support"
-+	depends on SOC_XWAY && PCI
-+
-+config PCIE_LANTIQ_MSI
-+	bool
-+	depends on PCIE_LANTIQ && PCI_MSI
-+	default y
-+
- config XRX200_PHY_FW
- 	bool "XRX200 PHY firmware loader"
- 	depends on SOC_XWAY
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -377,6 +377,8 @@ void __init ltq_soc_init(void)
- 				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- 				PMU_PPE_QSB | PMU_PPE_TOP);
- 		clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
-+		pmu_w32(~0, PMU_PWDSR1);
-+		pmu_w32(pmu_r32(PMU_PWDSR) & ~PMU_PCIE_CLK, PMU_PWDSR);
- 	} else if (of_machine_is_compatible("lantiq,ar9")) {
- 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
- 				ltq_ar9_fpi_hz(), CLOCK_250M);
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -43,6 +43,8 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops
- obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
- obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
-+obj-$(CONFIG_PCIE_LANTIQ)	+= ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o
-+obj-$(CONFIG_PCIE_LANTIQ_MSI)	+= pcie-lantiq-msi.o
- obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
- obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
---- /dev/null
-+++ b/arch/mips/pci/fixup-lantiq-pcie.c
-@@ -0,0 +1,82 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_fixup_pcie.c
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe 
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_fixup_pcie.c
-+ \ingroup IFX_PCIE  
-+ \brief PCIe Fixup functions source file
-+*/
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+#include <linux/pci_ids.h>
-+
-+#include <lantiq_soc.h>
-+
-+#include "pcie-lantiq.h"
-+
-+#define PCI_VENDOR_ID_INFINEON         0x15D1
-+#define PCI_DEVICE_ID_INFINEON_DANUBE  0x000F
-+#define PCI_DEVICE_ID_INFINEON_PCIE    0x0011
-+#define PCI_VENDOR_ID_LANTIQ        0x1BEF
-+#define PCI_DEVICE_ID_LANTIQ_PCIE       0x0011
-+
-+
-+
-+static void
-+ifx_pcie_fixup_resource(struct pci_dev *dev)
-+{
-+    u32 reg;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-+
-+    printk("%s: fixup host controller %s (%04x:%04x)\n", 
-+        __func__, pci_name(dev), dev->vendor, dev->device); 
-+
-+   /* Setup COMMAND register */
-+    reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* | 
-+          PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR;
-+    pci_write_config_word(dev, PCI_COMMAND, reg);
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource);
-+
-+static void
-+ifx_pcie_rc_class_early_fixup(struct pci_dev *dev)
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-+
-+    if (dev->devfn == PCI_DEVFN(0, 0) &&
-+        (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
-+
-+        dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff);
-+
-+        printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__);
-+    }
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-+    mdelay(10);
-+}
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE,
-+     ifx_pcie_rc_class_early_fixup);
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
-+     ifx_pcie_rc_class_early_fixup);
---- a/arch/mips/pci/fixup-lantiq.c
-+++ b/arch/mips/pci/fixup-lantiq.c
-@@ -8,12 +8,18 @@
- 
- #include <linux/of_irq.h>
- #include <linux/of_pci.h>
-+#include "ifxmips_pci_common.h"
- 
- int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL;
- int (*ltq_pci_plat_dev_init)(struct pci_dev *dev) = NULL;
- 
- int pcibios_plat_dev_init(struct pci_dev *dev)
- {
-+#ifdef CONFIG_PCIE_LANTIQ
-+	if (pci_find_capability(dev, PCI_CAP_ID_EXP))
-+		ifx_pcie_bios_plat_dev_init(dev);
-+#endif
-+
- 	if (ltq_pci_plat_arch_init)
- 		return ltq_pci_plat_arch_init(dev);
- 
-@@ -25,5 +31,10 @@ int pcibios_plat_dev_init(struct pci_dev
- 
- int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
- {
-+#ifdef CONFIG_PCIE_LANTIQ
-+	if (pci_find_capability(dev, PCI_CAP_ID_EXP))
-+		return ifx_pcie_bios_map_irq(dev, slot, pin);
-+#endif
-+
- 	return of_irq_parse_and_map_pci(dev, slot, pin);
- }
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pci_common.h
-@@ -0,0 +1,57 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pci_common.h
-+** PROJECT      : IFX UEIP
-+** MODULES      : PCI subsystem
-+**
-+** DATE         : 30 June 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    30 June,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+
-+#ifndef IFXMIPS_PCI_COMMON_H
-+#define IFXMIPS_PCI_COMMON_H
-+#include <linux/version.h>
-+/*!
-+ \defgroup IFX_PCI_COM  IFX PCI/PCIe common parts for OS integration  
-+ \brief  PCI/PCIe common parts
-+*/
-+
-+/*!
-+ \defgroup IFX_PCI_COM_OS OS APIs
-+ \ingroup IFX_PCI_COM
-+ \brief PCI/PCIe bus driver OS interface functions
-+*/
-+/*!
-+  \file ifxmips_pci_common.h
-+  \ingroup IFX_PCI_COM
-+  \brief PCI/PCIe bus driver common OS header file
-+*/
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
-+#define IFX_PCI_CONST
-+#else
-+#define IFX_PCI_CONST const
-+#endif
-+#ifdef CONFIG_IFX_PCI
-+extern int ifx_pci_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
-+extern int ifx_pci_bios_plat_dev_init(struct pci_dev *dev);
-+#endif /* COFNIG_IFX_PCI */
-+
-+#ifdef CONFIG_PCIE_LANTIQ
-+extern int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
-+extern int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev);
-+#endif
-+
-+#endif /* IFXMIPS_PCI_COMMON_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie.c
-@@ -0,0 +1,1092 @@
-+/*
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ *
-+ *  Copyright (C) 2009 Lei Chuanhua <chuanhua.lei@infineon.com>
-+ *  Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <asm/paccess.h>
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+#include <linux/module.h>
-+
-+#include "ifxmips_pcie.h"
-+#include "ifxmips_pcie_reg.h"
-+
-+/* Enable 32bit io due to its mem mapped io nature */
-+#define IFX_PCIE_ERROR_INT
-+#define IFX_PCIE_IO_32BIT
-+
-+#define IFX_PCIE_IR                     (INT_NUM_IM4_IRL0 + 25)
-+#define IFX_PCIE_INTA                   (INT_NUM_IM4_IRL0 + 8)
-+#define IFX_PCIE_INTB                   (INT_NUM_IM4_IRL0 + 9)
-+#define IFX_PCIE_INTC                   (INT_NUM_IM4_IRL0 + 10)
-+#define IFX_PCIE_INTD                   (INT_NUM_IM4_IRL0 + 11)
-+#define MS(_v, _f)  (((_v) & (_f)) >> _f##_S)
-+#define SM(_v, _f)  (((_v) << _f##_S) & (_f))
-+#define IFX_REG_SET_BIT(_f, _r) \
-+	IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r))
-+
-+#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10
-+
-+static DEFINE_SPINLOCK(ifx_pcie_lock);
-+
-+u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
-+
-+static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
-+    {
-+        .ir_irq = {
-+            .irq  = IFX_PCIE_IR,
-+            .name = "ifx_pcie_rc0",
-+        },
-+
-+        .legacy_irq = {
-+            {
-+                .irq_bit = PCIE_IRN_INTA,
-+                .irq     = IFX_PCIE_INTA,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTB,
-+                .irq     = IFX_PCIE_INTB,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTC,
-+                .irq     = IFX_PCIE_INTC,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTD,
-+                .irq     = IFX_PCIE_INTD,
-+            },
-+        },
-+    },
-+
-+};
-+
-+void ifx_pcie_debug(const char *fmt, ...)
-+{
-+	static char buf[256] = {0};      /* XXX */
-+	va_list ap;
-+
-+	va_start(ap, fmt);
-+	vsnprintf(buf, sizeof(buf), fmt, ap);
-+	va_end(ap);
-+
-+	printk("%s", buf);
-+}
-+
-+
-+static inline int pcie_ltssm_enable(int pcie_port)
-+{
-+	int i;
-+
-+	/* Enable LTSSM */
-+	IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port));
-+
-+	/* Wait for the link to come up */
-+	for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) {
-+		if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING))
-+			return 0;
-+		udelay(10);
-+	}
-+
-+	printk("%s link timeout!!!!!\n", __func__);
-+	return -1;
-+}
-+
-+static inline void pcie_status_register_clear(int pcie_port)
-+{
-+	IFX_REG_W32(0, PCIE_RC_DR(pcie_port));
-+	IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port));
-+	IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port));
-+	IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port));
-+	IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port));
-+	IFX_REG_W32(0, PCIE_RSTS(pcie_port));
-+	IFX_REG_W32(0, PCIE_UES_R(pcie_port));
-+	IFX_REG_W32(0, PCIE_UEMR(pcie_port));
-+	IFX_REG_W32(0, PCIE_UESR(pcie_port));
-+	IFX_REG_W32(0, PCIE_CESR(pcie_port));
-+	IFX_REG_W32(0, PCIE_CEMR(pcie_port));
-+	IFX_REG_W32(0, PCIE_RESR(pcie_port));
-+	IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port));
-+	IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port));
-+	IFX_REG_W32(0, PCIE_TPFCS(pcie_port));
-+	IFX_REG_W32(0, PCIE_TNPFCS(pcie_port));
-+	IFX_REG_W32(0, PCIE_TCFCS(pcie_port));
-+	IFX_REG_W32(0, PCIE_QSR(pcie_port));
-+	IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port));
-+}
-+
-+static inline int ifx_pcie_link_up(int pcie_port)
-+{
-+    return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0;
-+}
-+
-+
-+static inline void pcie_mem_io_setup(int pcie_port)
-+{
-+    u32 reg;
-+    /*
-+     * BAR[0:1] readonly register 
-+     * RC contains only minimal BARs for packets mapped to this device 
-+     * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that
-+     * reside on the downstream side fo the bridge.
-+     */
-+    reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR)
-+        | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR);
-+
-+    IFX_REG_W32(reg, PCIE_MBML(pcie_port));
-+
-+
-+#ifdef IFX_PCIE_PREFETCH_MEM_64BIT
-+    reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_PMBL_END_ADDR)
-+        | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_PMBL_UPPER_12BIT)
-+        | PCIE_PMBL_64BIT_ADDR;
-+    IFX_REG_W32(reg, PCIE_PMBL(pcie_port));
-+
-+    /* Must configure upper 32bit */
-+    IFX_REG_W32(0, PCIE_PMBU32(pcie_port));
-+    IFX_REG_W32(0, PCIE_PMLU32(pcie_port));
-+#else
-+    /* PCIe_PBML, same as MBML */
-+    IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port));
-+#endif 
-+
-+    /* IO Address Range */
-+    reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR)
-+        | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR);
-+#ifdef IFX_PCIE_IO_32BIT    
-+    reg |= PCIE_IOBLSECS_32BIT_IO_ADDR;
-+#endif /* IFX_PCIE_IO_32BIT */
-+    IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port));
-+
-+#ifdef IFX_PCIE_IO_32BIT
-+    reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT)
-+        | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE);
-+    IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port));
-+
-+#endif /* IFX_PCIE_IO_32BIT */
-+}
-+
-+static inline void
-+pcie_device_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Device capability register, set up Maximum payload size */
-+    reg = IFX_REG_R32(PCIE_DCAP(pcie_port));
-+    reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT;
-+    reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE);
-+
-+    /* Only available for EP */
-+    reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY);
-+    IFX_REG_W32(reg, PCIE_DCAP(pcie_port));
-+
-+    /* Device control and status register */
-+    /* Set Maximum Read Request size for the device as a Requestor */
-+    reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port));
-+
-+    /* 
-+     * Request size can be larger than the MPS used, but the completions returned 
-+     * for the read will be bounded by the MPS size.
-+     * In our system, Max request size depends on AHB burst size. It is 64 bytes.
-+     * but we set it as 128 as minimum one.
-+     */
-+    reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE)
-+            | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE);
-+
-+    /* Enable relaxed ordering, no snoop, and all kinds of errors */
-+    reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN;
-+
-+    IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port));
-+}
-+
-+static inline void
-+pcie_link_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /*
-+     * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM 
-+     * L0s is reported during link training via TS1 order set by N_FTS
-+     */
-+    reg = IFX_REG_R32(PCIE_LCAP(pcie_port));
-+    reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY;
-+    reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY);
-+    IFX_REG_W32(reg, PCIE_LCAP(pcie_port));
-+
-+    /* Link control and status register */
-+    reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-+
-+    /* Link Enable, ASPM enabled  */
-+    reg &= ~PCIE_LCTLSTS_LINK_DISABLE;
-+
-+#ifdef CONFIG_PCIEASPM
-+    /*  
-+     * We use the same physical reference clock that the platform provides on the connector 
-+     * It paved the way for ASPM to calculate the new exit Latency
-+     */
-+    reg |= PCIE_LCTLSTS_SLOT_CLK_CFG;
-+    reg |= PCIE_LCTLSTS_COM_CLK_CFG;
-+    /*
-+     * We should disable ASPM by default except that we have dedicated power management support
-+     * Enable ASPM will cause the system hangup/instability, performance degration
-+     */
-+    reg |= PCIE_LCTLSTS_ASPM_ENABLE;
-+#else
-+    reg &= ~PCIE_LCTLSTS_ASPM_ENABLE;
-+#endif /* CONFIG_PCIEASPM */
-+
-+    /* 
-+     * The maximum size of any completion with data packet is bounded by the MPS setting 
-+     * in  device control register 
-+     */
-+
-+    /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */
-+    reg &= ~ PCIE_LCTLSTS_RCB128;
-+
-+    IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
-+}
-+
-+static inline void pcie_error_setup(int pcie_port)
-+{
-+	u32 reg;
-+
-+	/* 
-+	* Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone 
-+	* Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE 
-+	*/
-+	reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
-+	reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE;
-+
-+	IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
-+
-+	/* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */
-+	reg = IFX_REG_R32(PCIE_UEMR(pcie_port));
-+	reg &= ~PCIE_ALL_UNCORRECTABLE_ERR;
-+	IFX_REG_W32(reg, PCIE_UEMR(pcie_port));
-+
-+	/* Uncorrectable Error Severity Register, ALL errors are FATAL */
-+	IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port));
-+
-+	/* Correctable Error Mask Register, unmask <enable> all bits */
-+	reg = IFX_REG_R32(PCIE_CEMR(pcie_port));
-+	reg &= ~PCIE_CORRECTABLE_ERR;
-+	IFX_REG_W32(reg, PCIE_CEMR(pcie_port));
-+
-+	/* Advanced Error Capabilities and Control Registr */
-+	reg = IFX_REG_R32(PCIE_AECCR(pcie_port));
-+	reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN;
-+	IFX_REG_W32(reg, PCIE_AECCR(pcie_port));
-+
-+	/* Root Error Command Register, Report all types of errors */
-+	reg = IFX_REG_R32(PCIE_RECR(pcie_port));
-+	reg |= PCIE_RECR_ERR_REPORT_EN;
-+	IFX_REG_W32(reg, PCIE_RECR(pcie_port));
-+
-+	/* Clear the Root status register */
-+	reg = IFX_REG_R32(PCIE_RESR(pcie_port));
-+	IFX_REG_W32(reg, PCIE_RESR(pcie_port));
-+}
-+
-+static inline void pcie_port_logic_setup(int pcie_port)
-+{
-+	u32 reg;
-+
-+	/* FTS number, default 12, increase to 63, may increase time from/to L0s to L0  */
-+	reg = IFX_REG_R32(PCIE_AFR(pcie_port));
-+	reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM);
-+	reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM)
-+		| SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM);
-+	/* L0s and L1 entry latency */
-+	reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY);
-+	reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY)
-+		| SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY);
-+	IFX_REG_W32(reg, PCIE_AFR(pcie_port));
-+
-+
-+	/* Port Link Control Register */
-+	reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
-+	reg |= PCIE_PLCR_DLL_LINK_EN;  /* Enable the DLL link */
-+	IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
-+
-+	/* Lane Skew Register */
-+	reg = IFX_REG_R32(PCIE_LSR(pcie_port));
-+	/* Enable ACK/NACK and FC */
-+	reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE);
-+	IFX_REG_W32(reg, PCIE_LSR(pcie_port));
-+
-+	/* Symbol Timer Register and Filter Mask Register 1 */
-+	reg = IFX_REG_R32(PCIE_STRFMR(pcie_port));
-+
-+	/* Default SKP interval is very accurate already, 5us */
-+	/* Enable IO/CFG transaction */
-+	reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE;
-+	/* Disable FC WDT */
-+	reg &= ~PCIE_STRFMR_FC_WDT_DISABLE;
-+	IFX_REG_W32(reg, PCIE_STRFMR(pcie_port));
-+
-+	/* Filter Masker Register 2 */
-+	reg = IFX_REG_R32(PCIE_FMR2(pcie_port));
-+	reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1;
-+	IFX_REG_W32(reg, PCIE_FMR2(pcie_port));
-+
-+	/* VC0 Completion Receive Queue Control Register */
-+	reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port));
-+	reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE;
-+	reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE);
-+	IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port));
-+}
-+
-+static inline void pcie_rc_cfg_reg_setup(int pcie_port)
-+{
-+	u32 reg;
-+
-+	/* Disable LTSSM */
-+	IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); /* Disable LTSSM */
-+
-+	pcie_mem_io_setup(pcie_port);
-+
-+	/* XXX, MSI stuff should only apply to EP */
-+	/* MSI Capability: Only enable 32-bit addresses */
-+	reg = IFX_REG_R32(PCIE_MCAPR(pcie_port));
-+	reg &= ~PCIE_MCAPR_ADDR64_CAP;
-+
-+	reg |= PCIE_MCAPR_MSI_ENABLE;
-+
-+	/* Disable multiple message */
-+	reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE);
-+	IFX_REG_W32(reg, PCIE_MCAPR(pcie_port));
-+
-+
-+	/* Enable PME, Soft reset enabled */
-+	reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port));
-+	reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST;
-+	IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port));
-+
-+	/* setup the bus */
-+	reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM);
-+	IFX_REG_W32(reg, PCIE_BNR(pcie_port));
-+
-+
-+	pcie_device_setup(pcie_port);
-+	pcie_link_setup(pcie_port);
-+	pcie_error_setup(pcie_port);
-+
-+	/* Root control and capabilities register */
-+	reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port));
-+	reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN;
-+	IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port));
-+
-+	/* Port VC Capability Register 2 */
-+	reg = IFX_REG_R32(PCIE_PVC2(pcie_port));
-+	reg &= ~PCIE_PVC2_VC_ARB_WRR;
-+	reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR;
-+	IFX_REG_W32(reg, PCIE_PVC2(pcie_port));
-+
-+	/* VC0 Resource Capability Register */
-+	reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port));
-+	reg &= ~PCIE_VC0_RC_REJECT_SNOOP;
-+	IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port));
-+
-+	pcie_port_logic_setup(pcie_port);
-+}
-+
-+static int ifx_pcie_wait_phy_link_up(int pcie_port)
-+{
-+#define IFX_PCIE_PHY_LINK_UP_TIMEOUT  1000 /* XXX, tunable */
-+    int i;
-+
-+    /* Wait for PHY link is up */
-+    for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) {
-+        if (ifx_pcie_link_up(pcie_port)) {
-+            break;
-+        }
-+        udelay(100);
-+    }
-+    if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) {
-+        printk(KERN_ERR "%s timeout\n", __func__);
-+        return -1;
-+    }
-+
-+    /* Check data link up or not */
-+    if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
-+        printk(KERN_ERR "%s DLL link is still down\n", __func__);
-+        return -1;
-+    }
-+
-+    /* Check Data link active or not */
-+    if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
-+        printk(KERN_ERR "%s DLL is not active\n", __func__);
-+        return -1;
-+    }
-+    return 0;
-+}
-+
-+static inline int pcie_app_loigc_setup(int pcie_port)
-+{
-+	/* supress ahb bus errrors */
-+	IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port));
-+
-+	/* Pull PCIe EP out of reset */
-+	pcie_device_rst_deassert(pcie_port);
-+
-+	/* Start LTSSM training between RC and EP */
-+	pcie_ltssm_enable(pcie_port);
-+
-+	/* Check PHY status after enabling LTSSM */
-+	if (ifx_pcie_wait_phy_link_up(pcie_port) != 0)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+/*
-+ * The numbers below are directly from the PCIe spec table 3-4/5. 
-+ */
-+static inline void pcie_replay_time_update(int pcie_port)
-+{
-+	u32 reg;
-+	int nlw;
-+	int rtl;
-+
-+	reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-+
-+	nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH);
-+	switch (nlw) {
-+	case PCIE_MAX_LENGTH_WIDTH_X1:
-+		rtl = 1677;
-+		break;
-+	case PCIE_MAX_LENGTH_WIDTH_X2:
-+		rtl = 867;
-+		break;
-+	case PCIE_MAX_LENGTH_WIDTH_X4:
-+		rtl = 462;
-+		break;
-+	case PCIE_MAX_LENGTH_WIDTH_X8:
-+		rtl = 258;
-+		break;
-+	default:
-+		rtl = 1677;
-+		break;
-+	}
-+	reg = IFX_REG_R32(PCIE_ALTRT(pcie_port));
-+	reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT;
-+	reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT);
-+	IFX_REG_W32(reg, PCIE_ALTRT(pcie_port));
-+}
-+
-+/*
-+ * Table 359 Enhanced Configuration Address Mapping1)
-+ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1
-+ * Memory Address PCI Express Configuration Space
-+ * A[(20+n-1):20] Bus Number 1 < n < 8
-+ * A[19:15] Device Number
-+ * A[14:12] Function Number
-+ * A[11:8] Extended Register Number
-+ * A[7:2] Register Number
-+ * A[1:0] Along with size of the access, used to generate Byte Enables
-+ * For VR9, only the address bits [22:0] are mapped to the configuration space:
-+ * . Address bits [22:20] select the target bus (1-of-8)1)
-+ * . Address bits [19:15] select the target device (1-of-32) on the bus
-+ * . Address bits [14:12] select the target function (1-of-8) within the device.
-+ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space
-+ * . Address bits [1:0] define the start byte location within the selected dword.
-+ */
-+static inline u32 pcie_bus_addr(u8 bus_num, u16 devfn, int where)
-+{
-+	u32 addr;
-+	u8  bus;
-+
-+	if (!bus_num) {
-+		/* type 0 */
-+		addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3);
-+	} else {
-+		bus = bus_num;
-+		/* type 1, only support 8 buses  */
-+		addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) |
-+			((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3);
-+	}
-+	return addr;
-+}
-+
-+static int pcie_valid_config(int pcie_port, int bus, int dev)
-+{
-+	/* RC itself */
-+	if ((bus == 0) && (dev == 0)) {
-+		return 1;
-+	}
-+
-+	/* No physical link */
-+	if (!ifx_pcie_link_up(pcie_port)) {
-+		return 0;
-+	}
-+
-+	/* Bus zero only has RC itself
-+	* XXX, check if EP will be integrated 
-+	*/
-+	if ((bus == 0) && (dev != 0)) {
-+		return 0;
-+	}
-+
-+	/* Maximum 8 buses supported for VRX */
-+	if (bus > 9) {
-+		return 0;
-+	}
-+
-+	/* 
-+	 * PCIe is PtP link, one bus only supports only one device 
-+	 * except bus zero and PCIe switch which is virtual bus device
-+	 * The following two conditions really depends on the system design
-+	 * and attached the device.
-+	 * XXX, how about more new switch
-+	*/
-+	if ((bus == 1) && (dev != 0)) {
-+		return 0;
-+	}
-+
-+	if ((bus >= 3) && (dev != 0)) {
-+		return 0;
-+	}
-+	return 1;
-+}
-+
-+static inline u32 ifx_pcie_cfg_rd(int pcie_port, u32 reg)
-+{
-+    return IFX_REG_R32((volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, u32 val)
-+{
-+    IFX_REG_W32( val, (volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline u32 ifx_pcie_rc_cfg_rd(int pcie_port, u32 reg)
-+{
-+    return IFX_REG_R32((volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, u32 val)
-+{
-+	IFX_REG_W32(val, (volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+u32 ifx_pcie_bus_enum_read_hack(int where, u32 value)
-+{
-+	u32 tvalue = value;
-+
-+	if (where == PCI_PRIMARY_BUS) {
-+		u8 primary, secondary, subordinate;
-+
-+		primary = tvalue & 0xFF;
-+		secondary = (tvalue >> 8) & 0xFF;
-+		subordinate = (tvalue >> 16) & 0xFF;
-+		primary += pcibios_1st_host_bus_nr();
-+		secondary += pcibios_1st_host_bus_nr();
-+		subordinate += pcibios_1st_host_bus_nr();
-+		tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
-+	}
-+	return tvalue;
-+}
-+
-+u32 ifx_pcie_bus_enum_write_hack(int where, u32 value)
-+{
-+    u32 tvalue = value;
-+
-+    if (where == PCI_PRIMARY_BUS) {
-+        u8 primary, secondary, subordinate;
-+
-+        primary = tvalue & 0xFF;
-+        secondary = (tvalue >> 8) & 0xFF;
-+        subordinate = (tvalue >> 16) & 0xFF;
-+        if (primary > 0 && primary != 0xFF) {
-+            primary -= pcibios_1st_host_bus_nr();
-+        }
-+
-+        if (secondary > 0 && secondary != 0xFF) {
-+            secondary -= pcibios_1st_host_bus_nr();
-+        }
-+        if (subordinate > 0 && subordinate != 0xFF) {
-+            subordinate -= pcibios_1st_host_bus_nr();
-+        }
-+        tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
-+    }
-+    else if (where == PCI_SUBORDINATE_BUS) {
-+        u8 subordinate = tvalue & 0xFF;
-+
-+        subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0;
-+        tvalue = subordinate;
-+    }
-+    return tvalue;
-+}
-+
-+static int ifx_pcie_read_config(struct pci_bus *bus, u32 devfn,
-+				int where, int size, u32 *value)
-+{
-+    u32 data = 0;
-+    int bus_number = bus->number;
-+    static const u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
-+    int ret = PCIBIOS_SUCCESSFUL;
-+    struct ifx_pci_controller *ctrl = bus->sysdata;
-+    int pcie_port = ctrl->port;
-+
-+    if (unlikely(size != 1 && size != 2 && size != 4)){
-+        ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+        goto out;
-+    }
-+
-+    /* Make sure the address is aligned to natural boundary */
-+    if (unlikely(((size - 1) & where))) {
-+        ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+        goto out;
-+    }
-+
-+    /* 
-+     * If we are second controller, we have to cheat OS so that it assume 
-+     * its bus number starts from 0 in host controller
-+     */
-+    bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-+
-+    /* 
-+     * We need to force the bus number to be zero on the root 
-+     * bus. Linux numbers the 2nd root bus to start after all 
-+     * busses on root 0. 
-+     */ 
-+    if (bus->parent == NULL) {
-+        bus_number = 0; 
-+    }
-+
-+    /* 
-+     * PCIe only has a single device connected to it. It is 
-+     * always device ID 0. Don't bother doing reads for other 
-+     * device IDs on the first segment. 
-+     */ 
-+    if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) {
-+        ret = PCIBIOS_FUNC_NOT_SUPPORTED;
-+        goto out; 
-+    }
-+
-+    if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
-+        *value = 0xffffffff;
-+        ret = PCIBIOS_DEVICE_NOT_FOUND;
-+        goto out;
-+    }
-+
-+    PCIE_IRQ_LOCK(ifx_pcie_lock);
-+    if (bus_number == 0) { /* RC itself */
-+        u32 t;
-+
-+        t = (where & ~3);
-+        data = ifx_pcie_rc_cfg_rd(pcie_port, t);
-+    } else {
-+        u32 addr = pcie_bus_addr(bus_number, devfn, where);
-+
-+        data = ifx_pcie_cfg_rd(pcie_port, addr);
-+    #ifdef CONFIG_IFX_PCIE_HW_SWAP
-+            data = le32_to_cpu(data);
-+    #endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+    }
-+    /* To get a correct PCI topology, we have to restore the bus number to OS */
-+    data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1);
-+
-+    PCIE_IRQ_UNLOCK(ifx_pcie_lock);
-+
-+    *value = (data >> (8 * (where & 3))) & mask[size & 7];
-+out:
-+    return ret;
-+}
-+
-+static u32 ifx_pcie_size_to_value(int where, int size, u32 data, u32 value)
-+{
-+	u32 shift;
-+	u32 tdata = data;
-+
-+	switch (size) {
-+	case 1:
-+		shift = (where & 0x3) << 3;
-+		tdata &= ~(0xffU << shift);
-+		tdata |= ((value & 0xffU) << shift);
-+		break;
-+	case 2:
-+		shift = (where & 3) << 3;
-+		tdata &= ~(0xffffU << shift);
-+		tdata |= ((value & 0xffffU) << shift);
-+		break;
-+	case 4:
-+		tdata = value;
-+		break;
-+	}
-+	return tdata;
-+}
-+
-+static int ifx_pcie_write_config(struct pci_bus *bus, u32 devfn,
-+				int where, int size, u32 value)
-+{
-+	int bus_number = bus->number;
-+	int ret = PCIBIOS_SUCCESSFUL;
-+	struct ifx_pci_controller *ctrl = bus->sysdata;
-+	int pcie_port = ctrl->port;
-+	u32 tvalue = value;
-+	u32 data;
-+
-+	/* Make sure the address is aligned to natural boundary */
-+	if (unlikely(((size - 1) & where))) {
-+		ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+		goto out;
-+	}
-+	/* 
-+	* If we are second controller, we have to cheat OS so that it assume 
-+	* its bus number starts from 0 in host controller
-+	*/
-+	bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-+
-+	/* 
-+	* We need to force the bus number to be zero on the root 
-+	* bus. Linux numbers the 2nd root bus to start after all 
-+	* busses on root 0. 
-+	*/ 
-+	if (bus->parent == NULL) {
-+		bus_number = 0; 
-+	}
-+
-+	if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
-+		ret = PCIBIOS_DEVICE_NOT_FOUND;
-+		goto out;
-+	}
-+
-+	/* XXX, some PCIe device may need some delay */
-+	PCIE_IRQ_LOCK(ifx_pcie_lock);
-+
-+	/* 
-+	* To configure the correct bus topology using native way, we have to cheat Os so that
-+	* it can configure the PCIe hardware correctly.
-+	*/
-+	tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0);
-+
-+	if (bus_number == 0) { /* RC itself */
-+		u32 t;
-+
-+		t = (where & ~3);
-+		data = ifx_pcie_rc_cfg_rd(pcie_port, t);
-+
-+		data = ifx_pcie_size_to_value(where, size, data, tvalue);
-+
-+		ifx_pcie_rc_cfg_wr(pcie_port, t, data);
-+	} else {
-+		u32 addr = pcie_bus_addr(bus_number, devfn, where);
-+
-+		data = ifx_pcie_cfg_rd(pcie_port, addr);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+		data = le32_to_cpu(data);
-+#endif
-+
-+		data = ifx_pcie_size_to_value(where, size, data, tvalue);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+		data = cpu_to_le32(data);
-+#endif
-+		ifx_pcie_cfg_wr(pcie_port, addr, data);
-+	}
-+	PCIE_IRQ_UNLOCK(ifx_pcie_lock);
-+out:
-+	return ret;
-+}
-+
-+static struct resource ifx_pcie_io_resource = {
-+	.name	= "PCIe0 I/O space",
-+	.start	= PCIE_IO_PHY_BASE,
-+	.end	= PCIE_IO_PHY_END,
-+	.flags	= IORESOURCE_IO,
-+};
-+
-+static struct resource ifx_pcie_mem_resource = {
-+	.name	= "PCIe0 Memory space",
-+	.start	= PCIE_MEM_PHY_BASE,
-+	.end	= PCIE_MEM_PHY_END,
-+	.flags	= IORESOURCE_MEM,
-+};
-+
-+static struct pci_ops ifx_pcie_ops = {
-+	.read	= ifx_pcie_read_config,
-+	.write	= ifx_pcie_write_config,
-+};
-+
-+static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = {
-+    {
-+        .pcic = {
-+            .pci_ops      = &ifx_pcie_ops,
-+            .mem_resource = &ifx_pcie_mem_resource,
-+            .io_resource  = &ifx_pcie_io_resource,
-+         },
-+         .port = IFX_PCIE_PORT0,
-+    },
-+};
-+
-+#ifdef IFX_PCIE_ERROR_INT
-+
-+static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id)
-+{
-+	struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id;
-+	int pcie_port = ctrl->port;
-+	u32 reg;
-+
-+	pr_debug("PCIe RC error intr %d\n", irq);
-+	reg = IFX_REG_R32(PCIE_IRNCR(pcie_port));
-+	reg &= PCIE_RC_CORE_COMBINED_INT;
-+	IFX_REG_W32(reg, PCIE_IRNCR(pcie_port));
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int
-+pcie_rc_core_int_init(int pcie_port)
-+{
-+	int ret;
-+
-+	/* Enable core interrupt */
-+	IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port));
-+
-+	/* Clear it first */
-+	IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port));
-+	ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, 0,
-+		pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]);
-+	if (ret)
-+		printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR);
-+
-+	return ret;
-+}
-+#endif
-+
-+int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	u32 irq_bit = 0;
-+	int irq = 0;
-+	struct ifx_pci_controller *ctrl = dev->bus->sysdata;
-+	int pcie_port = ctrl->port;
-+
-+	printk("%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin);
-+
-+	if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) {
-+		printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin);
-+		return -1;
-+	}
-+
-+	/* Pin index so minus one */
-+	irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit;
-+	irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq;
-+	IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port));
-+	IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port));
-+	printk("%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq);
-+	return irq;
-+}
-+
-+int  ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
-+{
-+    u16 config;
-+#ifdef IFX_PCIE_ERROR_INT
-+    u32 dconfig; 
-+    int pos;
-+#endif
-+
-+    /* Enable reporting System errors and parity errors on all devices */ 
-+    /* Enable parity checking and error reporting */ 
-+    pci_read_config_word(dev, PCI_COMMAND, &config);
-+    config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE |
-+          PCI_COMMAND_FAST_BACK*/;
-+    pci_write_config_word(dev, PCI_COMMAND, config);
-+
-+    if (dev->subordinate) {
-+        /* Set latency timers on sub bridges */
-+        pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */
-+        /* More bridge error detection */
-+        pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
-+        config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
-+        pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
-+    }
-+#ifdef IFX_PCIE_ERROR_INT
-+    /* Enable the PCIe normal error reporting */
-+    pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-+    if (pos) {
-+
-+        /* Disable system error generation in response to error messages */
-+        pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config);
-+        config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE);
-+        pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config);
-+
-+        /* Clear PCIE Capability's Device Status */
-+        pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config);
-+        pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config);
-+
-+        /* Update Device Control */ 
-+        pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
-+        /* Correctable Error Reporting */
-+        config |= PCI_EXP_DEVCTL_CERE;
-+        /* Non-Fatal Error Reporting */
-+        config |= PCI_EXP_DEVCTL_NFERE;
-+        /* Fatal Error Reporting */
-+        config |= PCI_EXP_DEVCTL_FERE;
-+        /* Unsupported Request */
-+        config |= PCI_EXP_DEVCTL_URRE;
-+        pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
-+    }
-+
-+    /* Find the Advanced Error Reporting capability */
-+    pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-+    if (pos) {
-+        /* Clear Uncorrectable Error Status */ 
-+        pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig);
-+        pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig);
-+        /* Enable reporting of all uncorrectable errors */
-+        /* Uncorrectable Error Mask - turned on bits disable errors */
-+        pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
-+        /* 
-+        * Leave severity at HW default. This only controls if 
-+        * errors are reported as uncorrectable or 
-+        * correctable, not if the error is reported. 
-+        */ 
-+        /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
-+        /* Clear Correctable Error Status */
-+        pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
-+        pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
-+        /* Enable reporting of all correctable errors */
-+        /* Correctable Error Mask - turned on bits disable errors */
-+        pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
-+        /* Advanced Error Capabilities */ 
-+        pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
-+        /* ECRC Generation Enable */
-+        if (dconfig & PCI_ERR_CAP_ECRC_GENC) {
-+            dconfig |= PCI_ERR_CAP_ECRC_GENE;
-+        }
-+        /* ECRC Check Enable */
-+        if (dconfig & PCI_ERR_CAP_ECRC_CHKC) {
-+            dconfig |= PCI_ERR_CAP_ECRC_CHKE;
-+        }
-+        pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
-+
-+        /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
-+        /* Enable Root Port's interrupt in response to error messages */
-+        pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
-+              PCI_ERR_ROOT_CMD_COR_EN |
-+              PCI_ERR_ROOT_CMD_NONFATAL_EN |
-+              PCI_ERR_ROOT_CMD_FATAL_EN); 
-+        /* Clear the Root status register */
-+        pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
-+        pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
-+    }
-+#endif /* IFX_PCIE_ERROR_INT */
-+    /* WAR, only 128 MRRS is supported, force all EPs to support this value */
-+    pcie_set_readrq(dev, 128);
-+    return 0;
-+}
-+
-+static int
-+pcie_rc_initialize(int pcie_port)
-+{
-+	int i;
-+#define IFX_PCIE_PHY_LOOP_CNT  5
-+
-+	pcie_rcu_endian_setup(pcie_port);
-+
-+	pcie_ep_gpio_rst_init(pcie_port);
-+
-+	/* 
-+	* XXX, PCIe elastic buffer bug will cause not to be detected. One more 
-+	* reset PCIe PHY will solve this issue 
-+	*/
-+	for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
-+		/* Disable PCIe PHY Analog part for sanity check */
-+		pcie_phy_pmu_disable(pcie_port);
-+
-+		pcie_phy_rst_assert(pcie_port);
-+		pcie_phy_rst_deassert(pcie_port);
-+
-+		/* Make sure PHY PLL is stable */
-+		udelay(20);
-+
-+		/* PCIe Core reset enabled, low active, sw programmed */
-+		pcie_core_rst_assert(pcie_port);
-+
-+		/* Put PCIe EP in reset status */
-+		pcie_device_rst_assert(pcie_port);
-+
-+		/* PCI PHY & Core reset disabled, high active, sw programmed */
-+		pcie_core_rst_deassert(pcie_port);
-+
-+		/* Already in a quiet state, program PLL, enable PHY, check ready bit */
-+		pcie_phy_clock_mode_setup(pcie_port);
-+
-+		/* Enable PCIe PHY and Clock */
-+		pcie_core_pmu_setup(pcie_port);
-+
-+		/* Clear status registers */
-+		pcie_status_register_clear(pcie_port);
-+
-+#ifdef CONFIG_PCI_MSI
-+		pcie_msi_init(pcie_port);
-+#endif /* CONFIG_PCI_MSI */
-+		pcie_rc_cfg_reg_setup(pcie_port);
-+
-+		/* Once link is up, break out */
-+		if (pcie_app_loigc_setup(pcie_port) == 0)
-+			break;
-+	}
-+	if (i >= IFX_PCIE_PHY_LOOP_CNT) {
-+		printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
-+		return -EIO;
-+	}
-+	/* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */
-+	pcie_replay_time_update(pcie_port);
-+	return 0;
-+}
-+
-+static int __init ifx_pcie_bios_init(void)
-+{
-+    void __iomem *io_map_base;
-+    int pcie_port;
-+    int startup_port;
-+
-+    /* Enable AHB Master/ Slave */
-+    pcie_ahb_pmu_setup();
-+
-+    startup_port = IFX_PCIE_PORT0;
-+    
-+    for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
-+	if (pcie_rc_initialize(pcie_port) == 0) {
-+	    IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", 
-+                 __func__, PCIE_CFG_PORT_TO_BASE(pcie_port));
-+            /* Otherwise, warning will pop up */
-+            io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE);
-+            if (io_map_base == NULL) {
-+                IFX_PCIE_PRINT(PCIE_MSG_ERR, "%s io space ioremap failed\n", __func__);
-+                return -ENOMEM;
-+            }
-+            ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
-+
-+            register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
-+            /* XXX, clear error status */
-+
-+            IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: mem_resource 0x%p, io_resource 0x%p\n", 
-+                              __func__, &ifx_pcie_controller[pcie_port].pcic.mem_resource, 
-+                              &ifx_pcie_controller[pcie_port].pcic.io_resource);
-+
-+        #ifdef IFX_PCIE_ERROR_INT
-+            pcie_rc_core_int_init(pcie_port);
-+        #endif /* IFX_PCIE_ERROR_INT */
-+        }
-+    }
-+
-+    return 0;
-+}
-+arch_initcall(ifx_pcie_bios_init);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-+MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module");
-+MODULE_DESCRIPTION("Infineon builtin PCIe RC driver");
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie.h
-@@ -0,0 +1,135 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie.h
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_H
-+#define IFXMIPS_PCIE_H
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include "ifxmips_pci_common.h"
-+#include "ifxmips_pcie_reg.h"
-+
-+/*!
-+ \defgroup IFX_PCIE  PCI Express bus driver module   
-+ \brief  PCI Express IP module support VRX200 
-+*/
-+
-+/*!
-+ \defgroup IFX_PCIE_OS OS APIs
-+ \ingroup IFX_PCIE
-+ \brief PCIe bus driver OS interface functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie.h
-+ \ingroup IFX_PCIE  
-+ \brief header file for PCIe module common header file
-+*/
-+#define PCIE_IRQ_LOCK(lock) do {             \
-+    unsigned long flags;                     \
-+    spin_lock_irqsave(&(lock), flags);
-+#define PCIE_IRQ_UNLOCK(lock)                \
-+    spin_unlock_irqrestore(&(lock), flags);  \
-+} while (0)
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
-+#define IRQF_SHARED SA_SHIRQ
-+#endif
-+
-+#define PCIE_MSG_MSI        0x00000001
-+#define PCIE_MSG_ISR        0x00000002
-+#define PCIE_MSG_FIXUP      0x00000004
-+#define PCIE_MSG_READ_CFG   0x00000008
-+#define PCIE_MSG_WRITE_CFG  0x00000010
-+#define PCIE_MSG_CFG        (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
-+#define PCIE_MSG_REG        0x00000020
-+#define PCIE_MSG_INIT       0x00000040
-+#define PCIE_MSG_ERR        0x00000080
-+#define PCIE_MSG_PHY        0x00000100
-+#define PCIE_MSG_ANY        0x000001ff
-+
-+#define IFX_PCIE_PORT0      0
-+#define IFX_PCIE_PORT1      1
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+#define IFX_PCIE_CORE_NR    2
-+#else
-+#define IFX_PCIE_CORE_NR    1
-+#endif
-+
-+#define IFX_PCIE_ERROR_INT
-+
-+//#define IFX_PCIE_DBG
-+
-+#if defined(IFX_PCIE_DBG)
-+#define IFX_PCIE_PRINT(_m, _fmt, args...) do {   \
-+        ifx_pcie_debug((_fmt), ##args);          \
-+} while (0)
-+
-+#define INLINE 
-+#else
-+#define IFX_PCIE_PRINT(_m, _fmt, args...)   \
-+    do {} while(0)
-+#define INLINE inline
-+#endif
-+
-+struct ifx_pci_controller {
-+	struct pci_controller   pcic;
-+    
-+	/* RC specific, per host bus information */
-+	u32   port;  /* Port index, 0 -- 1st core, 1 -- 2nd core */
-+};
-+
-+typedef struct ifx_pcie_ir_irq {
-+    const unsigned int irq;
-+    const char name[16];
-+}ifx_pcie_ir_irq_t;
-+
-+typedef struct ifx_pcie_legacy_irq{
-+    const u32 irq_bit;
-+    const int irq;
-+}ifx_pcie_legacy_irq_t;
-+
-+typedef struct ifx_pcie_irq {
-+    ifx_pcie_ir_irq_t ir_irq;
-+    ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
-+}ifx_pcie_irq_t;
-+
-+extern u32 g_pcie_debug_flag;
-+extern void ifx_pcie_debug(const char *fmt, ...);
-+extern void pcie_phy_clock_mode_setup(int pcie_port);
-+extern void pcie_msi_pic_init(int pcie_port);
-+extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
-+extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
-+
-+#define CONFIG_VR9
-+
-+#ifdef CONFIG_VR9
-+#include "ifxmips_pcie_vr9.h"
-+#elif defined (CONFIG_AR10)
-+#include "ifxmips_pcie_ar10.h"
-+#else
-+#error "PCIE: platform not defined"
-+#endif /* CONFIG_VR9 */
-+
-+#endif  /* IFXMIPS_PCIE_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_ar10.h
-@@ -0,0 +1,290 @@
-+/****************************************************************************
-+                              Copyright (c) 2010
-+                            Lantiq Deutschland GmbH
-+                     Am Campeon 3; 85579 Neubiberg, Germany
-+
-+  For licensing information, see the file 'LICENSE' in the root folder of
-+  this software module.
-+
-+ *****************************************************************************/
-+/*!
-+  \file ifxmips_pcie_ar10.h
-+  \ingroup IFX_PCIE
-+  \brief PCIe RC driver ar10 specific file
-+*/
-+
-+#ifndef IFXMIPS_PCIE_AR10_H
-+#define IFXMIPS_PCIE_AR10_H
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+
-+/* Project header file */
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_pmu.h>
-+#include <asm/ifx/ifx_gpio.h>
-+#include <asm/ifx/ifx_ebu_led.h>
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+    ifx_ebu_led_enable();
-+    if (pcie_port == 0) {
-+        ifx_ebu_led_set_data(11, 1);        
-+    }
-+    else {
-+        ifx_ebu_led_set_data(12, 1);  
-+    }
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void) 
-+{
-+    /* XXX, moved to CGU to control AHBM */
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+    /* Inbound, big endian */
-+    reg |= IFX_RCU_BE_AHB4S;
-+    if (pcie_port == 0) {
-+        reg |= IFX_RCU_BE_PCIE0M;
-+
-+    #ifdef CONFIG_IFX_PCIE_HW_SWAP
-+        /* Outbound, software swap needed */
-+        reg |= IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE0S;
-+    #else
-+        /* Outbound little endian  */
-+        reg &= ~IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE0S;
-+    #endif
-+    }
-+    else {
-+        reg |= IFX_RCU_BE_PCIE1M;
-+    #ifdef CONFIG_IFX_PCIE1_HW_SWAP
-+        /* Outbound, software swap needed */
-+        reg |= IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE1S;
-+    #else
-+        /* Outbound little endian  */
-+        reg &= ~IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE1S;
-+    #endif
-+    }
-+
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+    if (pcie_port == 0) { /* XXX, should use macro*/
-+        PCIE0_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        PCIE1_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+    if (pcie_port == 0) { /* XXX, should use macro*/
-+        PCIE0_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+    }
-+    else {
-+        PCIE1_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+    }
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+    if (pcie_port == 0) {
-+        /* Config AHB->PCIe and PDI endianness */
-+        reg |= IFX_RCU_BE_PCIE0_PDI;
-+    }
-+    else {
-+        /* Config AHB->PCIe and PDI endianness */
-+        reg |= IFX_RCU_BE_PCIE1_PDI;
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+    if (pcie_port == 0) {
-+        /* Enable PDI to access PCIe PHY register */
-+        PDI0_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        PDI1_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+    /* Reset Core, bit 22 */
-+    if (pcie_port == 0) {
-+        reg |= 0x00400000;
-+    }
-+    else {
-+        reg |= 0x08000000; /* Bit 27 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    if (pcie_port == 0) {
-+        reg &= ~0x00400000; /* bit 22 */
-+    }
-+    else {
-+        reg &= ~0x08000000; /* Bit 27 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    if (pcie_port == 0) {
-+        reg |= 0x00001000; /* Bit 12 */
-+    }
-+    else {
-+        reg |= 0x00002000; /* Bit 13 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    if (pcie_port == 0) {
-+        reg &= ~0x00001000; /* Bit 12 */
-+    }
-+    else {
-+        reg &= ~0x00002000; /* Bit 13 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+    if (pcie_port == 0) {
-+        ifx_ebu_led_set_data(11, 0);
-+    }
-+    else {
-+        ifx_ebu_led_set_data(12, 0);
-+    }
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+    mdelay(100);
-+    if (pcie_port == 0) {
-+        ifx_ebu_led_set_data(11, 1);
-+    }
-+    else {
-+        ifx_ebu_led_set_data(12, 1);
-+    }
-+    ifx_ebu_led_disable();
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+    if (pcie_port == 0) {
-+        PCIE0_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        PCIE1_CTRL_PMU_SETUP(IFX_PMU_ENABLE); 
-+    }
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+    pcie_msi_pic_init(pcie_port);
-+    if (pcie_port == 0) {
-+        MSI0_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        MSI1_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+    u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+    if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+        if (pcibios_host_nr() > 1) {
-+            tbus_number -= pcibios_1st_host_bus_nr();
-+        }        
-+    }
-+#endif /* CONFIG_IFX_PCI */
-+    return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+    struct pci_dev *pdev;
-+    u32 tvalue = value;
-+
-+    /* Sanity check */
-+    pdev = pci_get_slot(bus, devfn);
-+    if (pdev == NULL) {
-+        return tvalue;
-+    }
-+
-+    /* Only care about PCI bridge */
-+    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+        return tvalue;
-+    }
-+
-+    if (read) { /* Read hack */
-+    #ifdef CONFIG_IFX_PCIE_2ND_CORE
-+        if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+            if (pcibios_host_nr() > 1) {
-+                tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+            }
-+        }
-+    #endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+    }
-+    else { /* Write hack */
-+    #ifdef CONFIG_IFX_PCIE_2ND_CORE
-+        if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+            if (pcibios_host_nr() > 1) {
-+                tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+            }
-+        }
-+    #endif
-+    }
-+    return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_AR10_H */
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_msi.c
-@@ -0,0 +1,392 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_msi.c
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCI MSI sub module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe MSI Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 02 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+/*!
-+ \defgroup IFX_PCIE_MSI MSI OS APIs
-+ \ingroup IFX_PCIE
-+ \brief PCIe bus driver OS interface functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie_msi.c
-+ \ingroup IFX_PCIE 
-+ \brief PCIe MSI OS interface file
-+*/
-+
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/pci.h>
-+#include <linux/msi.h>
-+#include <linux/module.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/traps.h>
-+
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_regs.h>
-+#include <asm/ifx/common_routines.h>
-+#include <asm/ifx/irq.h>
-+
-+#include "ifxmips_pcie_reg.h"
-+#include "ifxmips_pcie.h"
-+
-+#define IFX_MSI_IRQ_NUM    16
-+
-+enum {
-+    IFX_PCIE_MSI_IDX0 = 0,
-+    IFX_PCIE_MSI_IDX1,
-+    IFX_PCIE_MSI_IDX2,
-+    IFX_PCIE_MSI_IDX3,
-+};
-+
-+typedef struct ifx_msi_irq_idx {
-+    const int irq;
-+    const int idx;
-+}ifx_msi_irq_idx_t;
-+
-+struct ifx_msi_pic {
-+    volatile u32  pic_table[IFX_MSI_IRQ_NUM];
-+    volatile u32  pic_endian;    /* 0x40  */
-+};
-+typedef struct ifx_msi_pic *ifx_msi_pic_t;
-+
-+typedef struct ifx_msi_irq {
-+    const volatile ifx_msi_pic_t msi_pic_p;
-+    const u32 msi_phy_base;
-+    const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM];
-+    /*
-+     * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is 
-+     * in use.
-+     */
-+    u16 msi_free_irq_bitmask;
-+
-+    /*
-+     * Each bit in msi_multiple_irq_bitmask tells that the device using 
-+     * this bit in msi_free_irq_bitmask is also using the next bit. This 
-+     * is used so we can disable all of the MSI interrupts when a device 
-+     * uses multiple.
-+     */
-+    u16 msi_multiple_irq_bitmask;
-+}ifx_msi_irq_t;
-+
-+static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = {
-+    {
-+        .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE,
-+        .msi_phy_base = PCIE_MSI_PHY_BASE,
-+        .msi_irq_idx = {
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+        },
-+        .msi_free_irq_bitmask = 0,
-+        .msi_multiple_irq_bitmask= 0,
-+    },
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+    {
-+        .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE,
-+        .msi_phy_base = PCIE1_MSI_PHY_BASE,
-+        .msi_irq_idx = {
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+        },
-+        .msi_free_irq_bitmask = 0,
-+        .msi_multiple_irq_bitmask= 0,
-+
-+    },
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+};
-+
-+/* 
-+ * This lock controls updates to msi_free_irq_bitmask, 
-+ * msi_multiple_irq_bitmask and pic register settting
-+ */ 
-+static DEFINE_SPINLOCK(ifx_pcie_msi_lock);
-+
-+void pcie_msi_pic_init(int pcie_port)
-+{
-+    spin_lock(&ifx_pcie_msi_lock);
-+    msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN;
-+    spin_unlock(&ifx_pcie_msi_lock);
-+}
-+
-+/** 
-+ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-+ * \brief Called when a driver request MSI interrupts instead of the 
-+ * legacy INT A-D. This routine will allocate multiple interrupts 
-+ * for MSI devices that support them. A device can override this by 
-+ * programming the MSI control bits [6:4] before calling 
-+ * pci_enable_msi(). 
-+ * 
-+ * \param[in] pdev   Device requesting MSI interrupts 
-+ * \param[in] desc   MSI descriptor 
-+ * 
-+ * \return   -EINVAL Invalid pcie root port or invalid msi bit
-+ * \return    0        OK
-+ * \ingroup IFX_PCIE_MSI
-+ */
-+int 
-+arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-+{
-+    int  irq, pos;
-+    u16  control;
-+    int  irq_idx;
-+    int  irq_step;
-+    int configured_private_bits;
-+    int request_private_bits;
-+    struct msi_msg msg;
-+    u16 search_mask;
-+    struct ifx_pci_controller *ctrl = pdev->bus->sysdata;
-+    int pcie_port = ctrl->port;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev));
-+
-+    /* XXX, skip RC MSI itself */
-+    if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
-+        IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__);
-+        return -EINVAL;
-+    }
-+
-+    /*
-+     * Read the MSI config to figure out how many IRQs this device 
-+     * wants.  Most devices only want 1, which will give 
-+     * configured_private_bits and request_private_bits equal 0. 
-+     */
-+    pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control);
-+
-+    /*
-+     * If the number of private bits has been configured then use 
-+     * that value instead of the requested number. This gives the 
-+     * driver the chance to override the number of interrupts 
-+     * before calling pci_enable_msi(). 
-+     */
-+    configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; 
-+    if (configured_private_bits == 0) {
-+        /* Nothing is configured, so use the hardware requested size */
-+        request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
-+    }
-+    else {
-+        /*
-+         * Use the number of configured bits, assuming the 
-+         * driver wanted to override the hardware request 
-+         * value.
-+         */
-+        request_private_bits = configured_private_bits;
-+    }
-+
-+    /*
-+     * The PCI 2.3 spec mandates that there are at most 32
-+     * interrupts. If this device asks for more, only give it one.
-+     */
-+    if (request_private_bits > 5) {
-+        request_private_bits = 0;
-+    }
-+again:
-+    /*
-+     * The IRQs have to be aligned on a power of two based on the
-+     * number being requested.
-+     */
-+    irq_step = (1 << request_private_bits);
-+
-+    /* Mask with one bit for each IRQ */
-+    search_mask = (1 << irq_step) - 1;
-+
-+    /*
-+     * We're going to search msi_free_irq_bitmask_lock for zero 
-+     * bits. This represents an MSI interrupt number that isn't in 
-+     * use.
-+     */
-+    spin_lock(&ifx_pcie_msi_lock);
-+    for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) {
-+        if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) {
-+            msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos; 
-+            msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos;
-+            break; 
-+        }
-+    }
-+    spin_unlock(&ifx_pcie_msi_lock); 
-+
-+    /* Make sure the search for available interrupts didn't fail */ 
-+    if (pos >= IFX_MSI_IRQ_NUM) {
-+        if (request_private_bits) {
-+            IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free "
-+                  "interrupts, trying just one", __func__, 1 << request_private_bits);
-+            request_private_bits = 0;
-+            goto again;
-+        }
-+        else {
-+            printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__);
-+            return -EINVAL;
-+        }
-+    } 
-+    irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq;
-+    irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx);
-+
-+    /*
-+     * Initialize MSI. This has to match the memory-write endianess from the device 
-+     * Address bits [23:12]
-+     */
-+    spin_lock(&ifx_pcie_msi_lock); 
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) |
-+                    SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) |
-+                    SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
-+
-+    /* Enable this entry */
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE;
-+    spin_unlock(&ifx_pcie_msi_lock);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n",
-+        pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]);
-+
-+    /* Update the number of IRQs the device has available to it */
-+    control &= ~PCI_MSI_FLAGS_QSIZE;
-+    control |= (request_private_bits << 4);
-+    pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control);
-+
-+    set_irq_msi(irq, desc);
-+    msg.address_hi = 0x0;
-+    msg.address_lo = msi_irqs[pcie_port].msi_phy_base;
-+    msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data);
-+
-+    write_msi_msg(irq, &msg);
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
-+    return 0;
-+}
-+
-+static int
-+pcie_msi_irq_to_port(unsigned int irq, int *port)
-+{
-+    int ret = 0;
-+
-+    if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 ||
-+        irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) {
-+        *port = IFX_PCIE_PORT0;
-+    }
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+    else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 ||
-+        irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) {
-+        *port = IFX_PCIE_PORT1;
-+    }
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+    else {
-+        printk(KERN_ERR "%s: Attempted to teardown illegal " 
-+            "MSI interrupt (%d)\n", __func__, irq);
-+        ret = -EINVAL;
-+    }
-+    return ret;
-+}
-+
-+/** 
-+ * \fn void arch_teardown_msi_irq(unsigned int irq)
-+ * \brief Called when a device no longer needs its MSI interrupts. All 
-+ * MSI interrupts for the device are freed. 
-+ * 
-+ * \param irq   The devices first irq number. There may be multple in sequence.
-+ * \return none
-+ * \ingroup IFX_PCIE_MSI
-+ */
-+void 
-+arch_teardown_msi_irq(unsigned int irq)
-+{
-+    int pos;
-+    int number_irqs; 
-+    u16 bitmask;
-+    int pcie_port;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__);
-+
-+    BUG_ON(irq > INT_NUM_IM4_IRL31);
-+
-+    if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) {
-+        return;
-+    }
-+
-+    /* Shift the mask to the correct bit location, not always correct 
-+     * Probally, the first match will be chosen.
-+     */
-+    for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) {
-+        if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq) 
-+            && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) {
-+            break;
-+        }
-+    }
-+    if (pos >= IFX_MSI_IRQ_NUM) {
-+        printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__);
-+        return;
-+    }
-+    spin_lock(&ifx_pcie_msi_lock);
-+    /* Disable this entry */
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE;
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA);
-+    spin_unlock(&ifx_pcie_msi_lock); 
-+    /*
-+     * Count the number of IRQs we need to free by looking at the
-+     * msi_multiple_irq_bitmask. Each bit set means that the next
-+     * IRQ is also owned by this device.
-+     */ 
-+    number_irqs = 0; 
-+    while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) && 
-+        (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) {
-+        number_irqs++;
-+    }
-+    number_irqs++;
-+
-+    /* Mask with one bit for each IRQ */
-+    bitmask = (1 << number_irqs) - 1;
-+
-+    bitmask <<= pos;
-+    if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) {
-+        printk(KERN_ERR "%s: Attempted to teardown MSI "
-+             "interrupt (%d) not in use\n", __func__, irq);
-+        return;
-+    }
-+    /* Checks are done, update the in use bitmask */
-+    spin_lock(&ifx_pcie_msi_lock);
-+    msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask;
-+    msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1);
-+    spin_unlock(&ifx_pcie_msi_lock);
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
-+}
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-+MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
-+MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_phy.c
-@@ -0,0 +1,478 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_phy.c
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe PHY sub module
-+**
-+** DATE         : 14 May 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    14 May,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_pcie_phy.c
-+ \ingroup IFX_PCIE  
-+ \brief PCIe PHY PLL register programming source file
-+*/
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/paccess.h>
-+#include <linux/delay.h>
-+
-+#include "ifxmips_pcie_reg.h"
-+#include "ifxmips_pcie.h"
-+
-+/* PCIe PDI only supports 16 bit operation */
-+
-+#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \
-+    ((*(volatile u16 *) (__addr)) = (__data))
-+    
-+#define IFX_PCIE_PHY_REG_READ16(__addr)  \
-+    (*(volatile u16 *) (__addr))
-+
-+#define IFX_PCIE_PHY_REG16(__addr)   \
-+    (*(volatile u16 *) (__addr))
-+
-+#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \
-+    u16 read_data;                                    \
-+    u16 write_data;                                   \
-+    read_data = IFX_PCIE_PHY_REG_READ16((__reg));      \
-+    write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\
-+    IFX_PCIE_PHY_REG_WRITE16((__reg), write_data);               \
-+} while (0)
-+
-+#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */
-+
-+//#define IFX_PCI_PHY_REG_DUMP
-+
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+static void
-+pcie_phy_reg_dump(int pcie_port) 
-+{
-+    printk("PLL REGFILE\n");
-+    printk("PCIE_PHY_PLL_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL3    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL3(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL4    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL4(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL5    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL5(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL6    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL6(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL7    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL7(pcie_port)));
-+    printk("PCIE_PHY_PLL_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_PLL_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_PLL_A_CTRL3  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL3(pcie_port)));
-+    printk("PCIE_PHY_PLL_STATUS   0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)));
-+
-+    printk("TX1 REGFILE\n");
-+    printk("PCIE_PHY_TX1_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX1_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX1_CTRL3    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL3(pcie_port)));
-+    printk("PCIE_PHY_TX1_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX1_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX1_MOD1     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD1(pcie_port)));
-+    printk("PCIE_PHY_TX1_MOD2     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD2(pcie_port)));
-+    printk("PCIE_PHY_TX1_MOD3     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD3(pcie_port)));
-+
-+    printk("TX2 REGFILE\n");
-+    printk("PCIE_PHY_TX2_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX2_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX2_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX2_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX2_MOD1     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD1(pcie_port)));
-+    printk("PCIE_PHY_TX2_MOD2     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD2(pcie_port)));
-+    printk("PCIE_PHY_TX2_MOD3     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD3(pcie_port)));
-+
-+    printk("RX1 REGFILE\n");
-+    printk("PCIE_PHY_RX1_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_RX1_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_RX1_CDR      0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CDR(pcie_port)));
-+    printk("PCIE_PHY_RX1_EI       0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_EI(pcie_port)));
-+    printk("PCIE_PHY_RX1_A_CTRL   0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_A_CTRL(pcie_port)));
-+}
-+#endif /* IFX_PCI_PHY_REG_DUMP */
-+
-+static void
-+pcie_phy_comm_setup(int pcie_port)
-+{
-+   /* PLL Setting */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-+
-+    /* increase the bias reference voltage */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-+
-+    /* Endcnt */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-+
-+    /* force */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-+
-+    /* predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-+
-+    /* ctrl_lim */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-+
-+    /* ctrl */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-+
-+    /* predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-+
-+    /* RTERM*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-+
-+    /* Improved 100MHz clock output  */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-+
-+    /* Reduced CDR BW to avoid glitches */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-+}
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+static void 
-+pcie_phy_36mhz_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+
-+    /* en_ext_mmd_div_ratio */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+    /* pll_ensdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+    /* const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+    /* const sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+    /* pllmod */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE
-+static void 
-+pcie_phy_36mhz_ssc_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+
-+    /* PLL Setting */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-+
-+    /* Increase the bias reference voltage */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-+
-+    /* Endcnt */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-+
-+    /* Force */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-+
-+    /* Predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-+
-+    /* ctrl_lim */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-+
-+    /* ctrl */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-+
-+    /* predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-+
-+    /* RTERM*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-+
-+    /* en_ext_mmd_div_ratio */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+    /* pll_ensdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400);
-+
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+    /* const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100);
-+    /* const sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+    /* pllmod */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF);
-+
-+    /* improved 100MHz clock output  */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-+
-+    /* reduced CDR BW to avoid glitches */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-+    
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE
-+static void 
-+pcie_phy_25mhz_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+    /* pll_ensdm */    
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200);
-+
-+    /* en_ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE
-+static void 
-+pcie_phy_100mhz_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif 
-+    /* en_ext_mmd_div_ratio */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+    /* pll_ensdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+    /* const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+    /* const sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+    /* pllmod */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */
-+
-+static int
-+pcie_phy_wait_startup_ready(int pcie_port)
-+{
-+    int i;
-+
-+    for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) {
-+        if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) {
-+            break;
-+        }
-+        udelay(10);
-+    }
-+    if (i >= IFX_PCIE_PLL_TIMEOUT) {
-+        printk(KERN_ERR "%s PLL Link timeout\n", __func__);
-+        return -1;
-+    }
-+    return 0;
-+}
-+
-+static void 
-+pcie_phy_load_enable(int pcie_port, int slice) 
-+{
-+    /* Set the load_en of tx/rx slice to '1' */
-+    switch (slice) {
-+        case 1:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010);
-+            break;
-+        case 2:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010);
-+            break;
-+        case 3:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002);
-+            break;
-+    }
-+}
-+
-+static void 
-+pcie_phy_load_disable(int pcie_port, int slice) 
-+{ 
-+    /* set the load_en of tx/rx slice to '0' */ 
-+    switch (slice) {
-+        case 1:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010);
-+            break;
-+        case 2:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010);
-+            break;
-+        case 3: 
-+            IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002);
-+            break;
-+    }
-+}
-+
-+static void 
-+pcie_phy_load_war(int pcie_port)
-+{
-+    int slice;
-+
-+    for (slice = 1; slice < 4; slice++) {
-+        pcie_phy_load_enable(pcie_port, slice);
-+        udelay(1);
-+        pcie_phy_load_disable(pcie_port, slice);
-+    }
-+}
-+
-+static void 
-+pcie_phy_tx2_modulation(int pcie_port)
-+{
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF);
-+    mdelay(1);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF);
-+}
-+
-+static void 
-+pcie_phy_tx1_modulation(int pcie_port)
-+{
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF);
-+    mdelay(1);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF);
-+}
-+
-+static void
-+pcie_phy_tx_modulation_war(int pcie_port)
-+{
-+    int i;
-+
-+#define PCIE_PHY_MODULATION_NUM 5 
-+    for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) {
-+        pcie_phy_tx2_modulation(pcie_port);
-+        pcie_phy_tx1_modulation(pcie_port);
-+    }
-+#undef PCIE_PHY_MODULATION_NUM
-+}
-+
-+void
-+pcie_phy_clock_mode_setup(int pcie_port)
-+{
-+    pcie_pdi_big_endian(pcie_port);
-+
-+    /* Enable PDI to access PCIe PHY register */
-+    pcie_pdi_pmu_enable(pcie_port);
-+
-+    /* Configure PLL and PHY clock */
-+    pcie_phy_comm_setup(pcie_port);
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+    pcie_phy_36mhz_mode_setup(pcie_port);
-+#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE)
-+    pcie_phy_36mhz_ssc_mode_setup(pcie_port);
-+#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE)
-+    pcie_phy_25mhz_mode_setup(pcie_port);
-+#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE)
-+    pcie_phy_100mhz_mode_setup(pcie_port);
-+#else
-+    #error "PCIE PHY Clock Mode must be chosen first!!!!"
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-+
-+    /* Enable PCIe PHY and make PLL setting take effect */
-+    pcie_phy_pmu_enable(pcie_port);
-+
-+    /* Check if we are in startup_ready status */
-+    pcie_phy_wait_startup_ready(pcie_port);
-+
-+    pcie_phy_load_war(pcie_port);
-+
-+    /* Apply TX modulation workarounds */
-+    pcie_phy_tx_modulation_war(pcie_port);
-+
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+}
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_pm.c
-@@ -0,0 +1,176 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_pm.c
-+** PROJECT      : IFX UEIP
-+** MODULES      : PCIE Root Complex Driver
-+**
-+** DATE         : 21 Dec 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIE Root Complex Driver Power Managment
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Lantiq Deutschland GmbH
-+**                      Am Campeon 3, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 21 Dec,2009   Lei Chuanhua    First UEIP release
-+*******************************************************************************/
-+/*!
-+  \defgroup IFX_PCIE_PM Power Management functions
-+  \ingroup IFX_PCIE
-+  \brief IFX PCIE Root Complex Driver power management functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie_pm.c
-+ \ingroup IFX_PCIE    
-+ \brief source file for PCIE Root Complex Driver Power Management
-+*/
-+
-+#ifndef EXPORT_SYMTAB
-+#define EXPORT_SYMTAB
-+#endif
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/system.h>
-+
-+/* Project header */
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_regs.h>
-+#include <asm/ifx/common_routines.h>
-+#include <asm/ifx/ifx_pmcu.h>
-+#include "ifxmips_pcie_pm.h"
-+
-+/** 
-+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
-+ * \brief the callback function to request pmcu state in the power management hardware-dependent module
-+ *
-+ * \param pmcuState This parameter is a PMCU state.
-+ *
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \return IFX_PMCU_RETURN_DENIED  Not allowed to operate power state
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
-+{
-+    switch(pmcuState) 
-+    {
-+        case IFX_PMCU_STATE_D0:
-+            return IFX_PMCU_RETURN_SUCCESS;
-+        case IFX_PMCU_STATE_D1: // Not Applicable
-+            return IFX_PMCU_RETURN_DENIED;
-+        case IFX_PMCU_STATE_D2: // Not Applicable
-+            return IFX_PMCU_RETURN_DENIED;
-+        case IFX_PMCU_STATE_D3: // Module clock gating and Power gating
-+            return IFX_PMCU_RETURN_SUCCESS;
-+        default:
-+            return IFX_PMCU_RETURN_DENIED;
-+    }
-+}
-+
-+/** 
-+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
-+ * \brief the callback function to get pmcu state in the power management hardware-dependent module
-+
-+ * \param pmcuState Pointer to return power state.
-+ *
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \return IFX_PMCU_RETURN_DENIED  Not allowed to operate power state
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
-+{
-+    return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/**
-+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
-+ * 
-+ * \param   pmcuModule      Module
-+ * \param   newState        New state
-+ * \param   oldState        Old state
-+ * \return  IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return  IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+{
-+    return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/**
-+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
-+ * 
-+ * \param   pmcuModule      Module
-+ * \param   newState        New state
-+ * \param   oldState        Old state
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+{
-+    return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/** 
-+ * \fn static void ifx_pcie_pmcu_init(void)
-+ * \brief Register with central PMCU module
-+ * \return none
-+ * \ingroup IFX_PCIE_PM
-+ */
-+void
-+ifx_pcie_pmcu_init(void)
-+{
-+    IFX_PMCU_REGISTER_t pmcuRegister;
-+
-+    /* XXX, hook driver context */
-+
-+    /* State function register */
-+    memset(&pmcuRegister, 0, sizeof(IFX_PMCU_REGISTER_t));
-+    pmcuRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
-+    pmcuRegister.pmcuModuleNr = 0;
-+    pmcuRegister.ifx_pmcu_state_change = ifx_pcie_pmcu_state_change;
-+    pmcuRegister.ifx_pmcu_state_get = ifx_pcie_pmcu_state_get;
-+    pmcuRegister.pre = ifx_pcie_pmcu_prechange;
-+    pmcuRegister.post= ifx_pcie_pmcu_postchange;
-+    ifx_pmcu_register(&pmcuRegister); 
-+}
-+
-+/** 
-+ * \fn static void ifx_pcie_pmcu_exit(void)
-+ * \brief Unregister with central PMCU module
-+ *
-+ * \return none
-+ * \ingroup IFX_PCIE_PM
-+ */
-+void
-+ifx_pcie_pmcu_exit(void)
-+{
-+    IFX_PMCU_REGISTER_t pmcuUnRegister;
-+
-+   /* XXX, hook driver context */
-+   
-+    pmcuUnRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
-+    pmcuUnRegister.pmcuModuleNr = 0;
-+    ifx_pmcu_unregister(&pmcuUnRegister);
-+}
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_pm.h
-@@ -0,0 +1,36 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_pm.h
-+** PROJECT      : IFX UEIP
-+** MODULES      : PCIe Root Complex Driver
-+**
-+** DATE         : 21 Dec 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver Power Managment
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Lantiq Deutschland GmbH
-+**                      Am Campeon 3, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 21 Dec,2009   Lei Chuanhua    First UEIP release
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_pcie_pm.h
-+ \ingroup IFX_PCIE 
-+ \brief header file for PCIe Root Complex Driver Power Management
-+*/
-+
-+#ifndef IFXMIPS_PCIE_PM_H
-+#define IFXMIPS_PCIE_PM_H
-+
-+void ifx_pcie_pmcu_init(void);
-+void ifx_pcie_pmcu_exit(void);
-+
-+#endif /* IFXMIPS_PCIE_PM_H  */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_reg.h
-@@ -0,0 +1,1001 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_reg.h
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_REG_H
-+#define IFXMIPS_PCIE_REG_H
-+/*!
-+ \file ifxmips_pcie_reg.h
-+ \ingroup IFX_PCIE  
-+ \brief header file for PCIe module register definition
-+*/
-+/* PCIe Address Mapping Base */
-+#define PCIE_CFG_PHY_BASE        0x1D000000UL
-+#define PCIE_CFG_BASE           (KSEG1 + PCIE_CFG_PHY_BASE)
-+#define PCIE_CFG_SIZE           (8 * 1024 * 1024)
-+
-+#define PCIE_MEM_PHY_BASE        0x1C000000UL
-+#define PCIE_MEM_BASE           (KSEG1 + PCIE_MEM_PHY_BASE)
-+#define PCIE_MEM_SIZE           (16 * 1024 * 1024)
-+#define PCIE_MEM_PHY_END        (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
-+
-+#define PCIE_IO_PHY_BASE         0x1D800000UL
-+#define PCIE_IO_BASE            (KSEG1 + PCIE_IO_PHY_BASE)
-+#define PCIE_IO_SIZE            (1 * 1024 * 1024)
-+#define PCIE_IO_PHY_END         (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
-+
-+#define PCIE_RC_CFG_BASE        (KSEG1 + 0x1D900000)
-+#define PCIE_APP_LOGIC_REG      (KSEG1 + 0x1E100900)
-+#define PCIE_MSI_PHY_BASE        0x1F600000UL
-+
-+#define PCIE_PDI_PHY_BASE        0x1F106800UL
-+#define PCIE_PDI_BASE           (KSEG1 + PCIE_PDI_PHY_BASE)
-+#define PCIE_PDI_SIZE            0x400
-+
-+#define PCIE1_CFG_PHY_BASE        0x19000000UL
-+#define PCIE1_CFG_BASE           (KSEG1 + PCIE1_CFG_PHY_BASE)
-+#define PCIE1_CFG_SIZE           (8 * 1024 * 1024)
-+
-+#define PCIE1_MEM_PHY_BASE        0x18000000UL
-+#define PCIE1_MEM_BASE           (KSEG1 + PCIE1_MEM_PHY_BASE)
-+#define PCIE1_MEM_SIZE           (16 * 1024 * 1024)
-+#define PCIE1_MEM_PHY_END        (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
-+
-+#define PCIE1_IO_PHY_BASE         0x19800000UL
-+#define PCIE1_IO_BASE            (KSEG1 + PCIE1_IO_PHY_BASE)
-+#define PCIE1_IO_SIZE            (1 * 1024 * 1024)
-+#define PCIE1_IO_PHY_END         (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
-+
-+#define PCIE1_RC_CFG_BASE        (KSEG1 + 0x19900000)
-+#define PCIE1_APP_LOGIC_REG      (KSEG1 + 0x1E100700)
-+#define PCIE1_MSI_PHY_BASE        0x1F400000UL
-+
-+#define PCIE1_PDI_PHY_BASE        0x1F700400UL
-+#define PCIE1_PDI_BASE           (KSEG1 + PCIE1_PDI_PHY_BASE)
-+#define PCIE1_PDI_SIZE            0x400
-+
-+#define PCIE_CFG_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
-+#define PCIE_MEM_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
-+#define PCIE_IO_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_END(X)  ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
-+#define PCIE_IO_PHY_PORT_TO_BASE(X)  ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
-+#define PCIE_IO_PHY_PORT_TO_END(X)   ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
-+#define PCIE_APP_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
-+#define PCIE_RC_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
-+#define PCIE_PHY_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
-+
-+/* PCIe Application Logic Register */
-+/* RC Core Control Register */
-+#define PCIE_RC_CCR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
-+/* This should be enabled after initializing configuratin registers
-+ * Also should check link status retraining bit
-+ */
-+#define PCIE_RC_CCR_LTSSM_ENABLE             0x00000001    /* Enable LTSSM to continue link establishment */
-+
-+/* RC Core Debug Register */
-+#define PCIE_RC_DR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
-+#define PCIE_RC_DR_DLL_UP                    0x00000001  /* Data Link Layer Up */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE       0x0000000E  /* Current Power State */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE_S     1
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE       0x000001F0  /* Current LTSSM State */
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S     4
-+
-+#define PCIE_RC_DR_PM_DEV_STATE              0x00000E00  /* Power Management D-State */
-+#define PCIE_RC_DR_PM_DEV_STATE_S            9
-+
-+#define PCIE_RC_DR_PM_ENABLED                0x00001000  /* Power Management State from PMU */
-+#define PCIE_RC_DR_PME_EVENT_ENABLED         0x00002000  /* Power Management Event Enable State */
-+#define PCIE_RC_DR_AUX_POWER_ENABLED         0x00004000  /* Auxiliary Power Enable */
-+
-+/* Current Power State Definition */
-+enum {
-+    PCIE_RC_DR_D0 = 0,
-+    PCIE_RC_DR_D1,   /* Not supported */
-+    PCIE_RC_DR_D2,   /* Not supported */
-+    PCIE_RC_DR_D3,
-+    PCIE_RC_DR_UN,
-+};
-+
-+/* PHY Link Status Register */
-+#define PCIE_PHY_SR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
-+#define PCIE_PHY_SR_PHY_LINK_UP              0x00000001   /* PHY Link Up/Down Indicator */
-+
-+/* Electromechanical Control Register */
-+#define PCIE_EM_CR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
-+#define PCIE_EM_CR_CARD_IS_PRESENT           0x00000001  /* Card Presence Detect State */
-+#define PCIE_EM_CR_MRL_OPEN                  0x00000002  /* MRL Sensor State */
-+#define PCIE_EM_CR_POWER_FAULT_SET           0x00000004  /* Power Fault Detected */
-+#define PCIE_EM_CR_MRL_SENSOR_SET            0x00000008  /* MRL Sensor Changed */
-+#define PCIE_EM_CR_PRESENT_DETECT_SET        0x00000010  /* Card Presense Detect Changed */
-+#define PCIE_EM_CR_CMD_CPL_INT_SET           0x00000020  /* Command Complete Interrupt */
-+#define PCIE_EM_CR_SYS_INTERLOCK_SET         0x00000040  /* System Electromechanical IterLock Engaged */
-+#define PCIE_EM_CR_ATTENTION_BUTTON_SET      0x00000080  /* Attention Button Pressed */
-+
-+/* Interrupt Status Register */
-+#define PCIE_IR_SR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
-+#define PCIE_IR_SR_PME_CAUSE_MSI             0x00000002  /* MSI caused by PME */
-+#define PCIE_IR_SR_HP_PME_WAKE_GEN           0x00000004  /* Hotplug PME Wake Generation */
-+#define PCIE_IR_SR_HP_MSI                    0x00000008  /* Hotplug MSI */
-+#define PCIE_IR_SR_AHB_LU_ERR                0x00000030  /* AHB Bridge Lookup Error Signals */
-+#define PCIE_IR_SR_AHB_LU_ERR_S              4
-+#define PCIE_IR_SR_INT_MSG_NUM               0x00003E00  /* Interrupt Message Number */
-+#define PCIE_IR_SR_INT_MSG_NUM_S             9
-+#define PCIE_IR_SR_AER_INT_MSG_NUM           0xF8000000  /* Advanced Error Interrupt Message Number */
-+#define PCIE_IR_SR_AER_INT_MSG_NUM_S         27
-+
-+/* Message Control Register */
-+#define PCIE_MSG_CR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
-+#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG     0x00000001  /* Generate PME Turn Off Message */
-+#define PCIE_MSG_CR_GEN_UNLOCK_MSG           0x00000002  /* Generate Unlock Message */
-+
-+#define PCIE_VDM_DR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
-+
-+/* Vendor-Defined Message Requester ID Register */
-+#define PCIE_VDM_RID(X)                     (PCIE_APP_PORT_TO_BASE (X) + 0x38)
-+#define PCIE_VDM_RID_VENROR_MSG_REQ_ID       0x0000FFFF
-+#define PCIE_VDM_RID_VDMRID_S                0
-+
-+/* ASPM Control Register */
-+#define PCIE_ASPM_CR(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
-+#define PCIE_ASPM_CR_HOT_RST                 0x00000001  /* Hot Reset Request to the downstream device */
-+#define PCIE_ASPM_CR_REQ_EXIT_L1             0x00000002  /* Request to Exit L1 */
-+#define PCIE_ASPM_CR_REQ_ENTER_L1            0x00000004  /* Request to Enter L1 */
-+
-+/* Vendor Message DW0 Register */
-+#define PCIE_VM_MSG_DW0(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
-+#define PCIE_VM_MSG_DW0_TYPE                 0x0000001F  /* Message type */
-+#define PCIE_VM_MSG_DW0_TYPE_S               0
-+#define PCIE_VM_MSG_DW0_FORMAT               0x00000060  /* Format */
-+#define PCIE_VM_MSG_DW0_FORMAT_S             5
-+#define PCIE_VM_MSG_DW0_TC                   0x00007000  /* Traffic Class */
-+#define PCIE_VM_MSG_DW0_TC_S                 12
-+#define PCIE_VM_MSG_DW0_ATTR                 0x000C0000  /* Atrributes */
-+#define PCIE_VM_MSG_DW0_ATTR_S               18
-+#define PCIE_VM_MSG_DW0_EP_TLP               0x00100000  /* Poisoned TLP */
-+#define PCIE_VM_MSG_DW0_TD                   0x00200000  /* TLP Digest */
-+#define PCIE_VM_MSG_DW0_LEN                  0xFFC00000  /* Length */
-+#define PCIE_VM_MSG_DW0_LEN_S                22
-+
-+/* Format Definition */
-+enum {
-+    PCIE_VM_MSG_FORMAT_00 = 0,  /* 3DW Hdr, no data*/
-+    PCIE_VM_MSG_FORMAT_01,      /* 4DW Hdr, no data */
-+    PCIE_VM_MSG_FORMAT_10,      /* 3DW Hdr, with data */
-+    PCIE_VM_MSG_FORMAT_11,      /* 4DW Hdr, with data */
-+};
-+
-+/* Traffic Class Definition */
-+enum {
-+    PCIE_VM_MSG_TC0 = 0,
-+    PCIE_VM_MSG_TC1,
-+    PCIE_VM_MSG_TC2,
-+    PCIE_VM_MSG_TC3,
-+    PCIE_VM_MSG_TC4,
-+    PCIE_VM_MSG_TC5,
-+    PCIE_VM_MSG_TC6,
-+    PCIE_VM_MSG_TC7,
-+};
-+
-+/* Attributes Definition */
-+enum {
-+    PCIE_VM_MSG_ATTR_00 = 0,   /* RO and No Snoop cleared */
-+    PCIE_VM_MSG_ATTR_01,       /* RO cleared , No Snoop set */
-+    PCIE_VM_MSG_ATTR_10,       /* RO set, No Snoop cleared*/
-+    PCIE_VM_MSG_ATTR_11,       /* RO and No Snoop set */
-+};
-+
-+/* Payload Size Definition */
-+#define PCIE_VM_MSG_LEN_MIN  0
-+#define PCIE_VM_MSG_LEN_MAX  1024
-+
-+/* Vendor Message DW1 Register */
-+#define PCIE_VM_MSG_DW1(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
-+#define PCIE_VM_MSG_DW1_FUNC_NUM            0x00000070  /* Function Number */
-+#define PCIE_VM_MSG_DW1_FUNC_NUM_S          8
-+#define PCIE_VM_MSG_DW1_CODE                0x00FF0000  /* Message Code */
-+#define PCIE_VM_MSG_DW1_CODE_S              16
-+#define PCIE_VM_MSG_DW1_TAG                 0xFF000000  /* Tag */
-+#define PCIE_VM_MSG_DW1_TAG_S               24
-+
-+#define PCIE_VM_MSG_DW2(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
-+#define PCIE_VM_MSG_DW3(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
-+
-+/* Vendor Message Request Register */
-+#define PCIE_VM_MSG_REQR(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
-+#define PCIE_VM_MSG_REQR_REQ                 0x00000001  /* Vendor Message Request */
-+
-+
-+/* AHB Slave Side Band Control Register */
-+#define PCIE_AHB_SSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
-+#define PCIE_AHB_SSB_REQ_BCM                0x00000001 /* Slave Reques BCM filed */
-+#define PCIE_AHB_SSB_REQ_EP                 0x00000002 /* Slave Reques EP filed */
-+#define PCIE_AHB_SSB_REQ_TD                 0x00000004 /* Slave Reques TD filed */
-+#define PCIE_AHB_SSB_REQ_ATTR               0x00000018 /* Slave Reques Attribute number */
-+#define PCIE_AHB_SSB_REQ_ATTR_S             3
-+#define PCIE_AHB_SSB_REQ_TC                 0x000000E0 /* Slave Request TC Field */
-+#define PCIE_AHB_SSB_REQ_TC_S               5
-+
-+/* AHB Master SideBand Ctrl Register */
-+#define PCIE_AHB_MSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
-+#define PCIE_AHB_MSB_RESP_ATTR               0x00000003 /* Master Response Attribute number */
-+#define PCIE_AHB_MSB_RESP_ATTR_S             0
-+#define PCIE_AHB_MSB_RESP_BAD_EOT            0x00000004 /* Master Response Badeot filed */
-+#define PCIE_AHB_MSB_RESP_BCM                0x00000008 /* Master Response BCM filed */
-+#define PCIE_AHB_MSB_RESP_EP                 0x00000010 /* Master Response EP filed */
-+#define PCIE_AHB_MSB_RESP_TD                 0x00000020 /* Master Response TD filed */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM            0x000003C0 /* Master Response Function number */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM_S          6
-+
-+/* AHB Control Register, fixed bus enumeration exception */
-+#define PCIE_AHB_CTRL(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
-+#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS     0x00000001 
-+
-+/* Interrupt Enalbe Register */
-+#define PCIE_IRNEN(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
-+#define PCIE_IRNCR(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
-+#define PCIE_IRNICR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
-+
-+/* PCIe interrupt enable/control/capture register definition */
-+#define PCIE_IRN_AER_REPORT                 0x00000001  /* AER Interrupt */
-+#define PCIE_IRN_AER_MSIX                   0x00000002  /* Advanced Error MSI-X Interrupt */
-+#define PCIE_IRN_PME                        0x00000004  /* PME Interrupt */
-+#define PCIE_IRN_HOTPLUG                    0x00000008  /* Hotplug Interrupt */
-+#define PCIE_IRN_RX_VDM_MSG                 0x00000010  /* Vendor-Defined Message Interrupt */
-+#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG     0x00000020  /* Correctable Error Message Interrupt */
-+#define PCIE_IRN_RX_NON_FATAL_ERR_MSG       0x00000040  /* Non-fatal Error Message */
-+#define PCIE_IRN_RX_FATAL_ERR_MSG           0x00000080  /* Fatal Error Message */
-+#define PCIE_IRN_RX_PME_MSG                 0x00000100  /* PME Message Interrupt */
-+#define PCIE_IRN_RX_PME_TURNOFF_ACK         0x00000200  /* PME Turnoff Ack Message Interrupt */
-+#define PCIE_IRN_AHB_BR_FATAL_ERR           0x00000400  /* AHB Fatal Error Interrupt */
-+#define PCIE_IRN_LINK_AUTO_BW_STATUS        0x00000800  /* Link Auto Bandwidth Status Interrupt */
-+#define PCIE_IRN_BW_MGT                     0x00001000  /* Bandwidth Managment Interrupt */
-+#define PCIE_IRN_INTA                       0x00002000  /* INTA */
-+#define PCIE_IRN_INTB                       0x00004000  /* INTB */
-+#define PCIE_IRN_INTC                       0x00008000  /* INTC */
-+#define PCIE_IRN_INTD                       0x00010000  /* INTD */
-+#define PCIE_IRN_WAKEUP                     0x00020000  /* Wake up Interrupt */
-+
-+#define PCIE_RC_CORE_COMBINED_INT    (PCIE_IRN_AER_REPORT |  PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
-+                                      PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
-+                                      PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
-+                                      PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
-+                                      PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
-+/* PCIe RC Configuration Register */
-+#define PCIE_VDID(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
-+
-+/* Bit definition from pci_reg.h */
-+#define PCIE_PCICMDSTS(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
-+#define PCIE_CCRID(X)               (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
-+#define PCIE_CLSLTHTBR(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
-+/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
-+#define PCIE_BAR0(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
-+#define PCIE_BAR1(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
-+
-+#define PCIE_BNR(X)                 (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
-+/* Bus Number Register bits */
-+#define PCIE_BNR_PRIMARY_BUS_NUM             0x000000FF
-+#define PCIE_BNR_PRIMARY_BUS_NUM_S           0
-+#define PCIE_PNR_SECONDARY_BUS_NUM           0x0000FF00
-+#define PCIE_PNR_SECONDARY_BUS_NUM_S         8
-+#define PCIE_PNR_SUB_BUS_NUM                 0x00FF0000
-+#define PCIE_PNR_SUB_BUS_NUM_S               16
-+
-+/* IO Base/Limit Register bits */
-+#define PCIE_IOBLSECS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C)  /* RC only */
-+#define PCIE_IOBLSECS_32BIT_IO_ADDR             0x00000001
-+#define PCIE_IOBLSECS_IO_BASE_ADDR              0x000000F0
-+#define PCIE_IOBLSECS_IO_BASE_ADDR_S            4
-+#define PCIE_IOBLSECS_32BIT_IOLIMT              0x00000100
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR             0x0000F000
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S           12
-+
-+/* Non-prefetchable Memory Base/Limit Register bit */
-+#define PCIE_MBML(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20)  /* RC only */
-+#define PCIE_MBML_MEM_BASE_ADDR                 0x0000FFF0
-+#define PCIE_MBML_MEM_BASE_ADDR_S               4
-+#define PCIE_MBML_MEM_LIMIT_ADDR                0xFFF00000
-+#define PCIE_MBML_MEM_LIMIT_ADDR_S              20
-+
-+/* Prefetchable Memory Base/Limit Register bit */
-+#define PCIE_PMBL(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24)  /* RC only */
-+#define PCIE_PMBL_64BIT_ADDR                    0x00000001
-+#define PCIE_PMBL_UPPER_12BIT                   0x0000FFF0
-+#define PCIE_PMBL_UPPER_12BIT_S                 4
-+#define PCIE_PMBL_E64MA                         0x00010000
-+#define PCIE_PMBL_END_ADDR                      0xFFF00000
-+#define PCIE_PMBL_END_ADDR_S                    20
-+#define PCIE_PMBU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28)  /* RC only */
-+#define PCIE_PMLU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C)  /* RC only */
-+
-+/* I/O Base/Limit Upper 16 bits register */
-+#define PCIE_IO_BANDL(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30)  /* RC only */
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE        0x0000FFFF
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S      0
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT       0xFFFF0000
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S     16
-+
-+#define PCIE_CPR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
-+#define PCIE_EBBAR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
-+
-+/* Interrupt and Secondary Bridge Control Register */
-+#define PCIE_INTRBCTRL(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
-+
-+#define PCIE_INTRBCTRL_INT_LINE                 0x000000FF
-+#define PCIE_INTRBCTRL_INT_LINE_S               0
-+#define PCIE_INTRBCTRL_INT_PIN                  0x0000FF00
-+#define PCIE_INTRBCTRL_INT_PIN_S                8
-+#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE   0x00010000    /* #PERR */
-+#define PCIE_INTRBCTRL_SERR_ENABLE              0x00020000    /* #SERR */
-+#define PCIE_INTRBCTRL_ISA_ENABLE               0x00040000    /* ISA enable, IO 64KB only */
-+#define PCIE_INTRBCTRL_VGA_ENABLE               0x00080000    /* VGA enable */
-+#define PCIE_INTRBCTRL_VGA_16BIT_DECODE         0x00100000    /* VGA 16bit decode */
-+#define PCIE_INTRBCTRL_RST_SECONDARY_BUS        0x00400000    /* Secondary bus rest, hot rest, 1ms */
-+/* Others are read only */
-+enum {
-+    PCIE_INTRBCTRL_INT_NON = 0,
-+    PCIE_INTRBCTRL_INTA,
-+    PCIE_INTRBCTRL_INTB,
-+    PCIE_INTRBCTRL_INTC,
-+    PCIE_INTRBCTRL_INTD,
-+};
-+
-+#define PCIE_PM_CAPR(X)                  (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
-+
-+/* Power Management Control and Status Register */
-+#define PCIE_PM_CSR(X)                   (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
-+
-+#define PCIE_PM_CSR_POWER_STATE           0x00000003   /* Power State */
-+#define PCIE_PM_CSR_POWER_STATE_S         0
-+#define PCIE_PM_CSR_SW_RST                0x00000008   /* Soft Reset Enabled */
-+#define PCIE_PM_CSR_PME_ENABLE            0x00000100   /* PME Enable */
-+#define PCIE_PM_CSR_PME_STATUS            0x00008000   /* PME status */
-+
-+/* MSI Capability Register for EP */
-+#define PCIE_MCAPR(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
-+
-+#define PCIE_MCAPR_MSI_CAP_ID             0x000000FF  /* MSI Capability ID */
-+#define PCIE_MCAPR_MSI_CAP_ID_S           0
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR       0x0000FF00  /* Next Capability Pointer */
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S     8
-+#define PCIE_MCAPR_MSI_ENABLE             0x00010000  /* MSI Enable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP          0x000E0000  /* Multiple Message Capable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP_S        17
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE       0x00700000  /* Multiple Message Enable */
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE_S     20
-+#define PCIE_MCAPR_ADDR64_CAP             0X00800000  /* 64-bit Address Capable */
-+
-+/* MSI Message Address Register */
-+#define PCIE_MA(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
-+
-+#define PCIE_MA_ADDR_MASK                 0xFFFFFFFC  /* Message Address */
-+
-+/* MSI Message Upper Address Register */
-+#define PCIE_MUA(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
-+
-+/* MSI Message Data Register */
-+#define PCIE_MD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
-+
-+#define PCIE_MD_DATA                      0x0000FFFF  /* Message Data */
-+#define PCIE_MD_DATA_S                    0
-+
-+/* PCI Express Capability Register */
-+#define PCIE_XCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
-+
-+#define PCIE_XCAP_ID                      0x000000FF  /* PCI Express Capability ID */
-+#define PCIE_XCAP_ID_S                    0
-+#define PCIE_XCAP_NEXT_CAP                0x0000FF00  /* Next Capability Pointer */
-+#define PCIE_XCAP_NEXT_CAP_S              8
-+#define PCIE_XCAP_VER                     0x000F0000  /* PCI Express Capability Version */
-+#define PCIE_XCAP_VER_S                   16
-+#define PCIE_XCAP_DEV_PORT_TYPE           0x00F00000  /* Device Port Type */
-+#define PCIE_XCAP_DEV_PORT_TYPE_S         20
-+#define PCIE_XCAP_SLOT_IMPLEMENTED        0x01000000  /* Slot Implemented */
-+#define PCIE_XCAP_MSG_INT_NUM             0x3E000000  /* Interrupt Message Number */
-+#define PCIE_XCAP_MSG_INT_NUM_S           25
-+
-+/* Device Capability Register */
-+#define PCIE_DCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
-+
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE        0x00000007   /* Max Payload size */
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S      0
-+#define PCIE_DCAP_PHANTOM_FUNC            0x00000018   /* Phanton Function, not supported */
-+#define PCIE_DCAP_PHANTOM_FUNC_S          3
-+#define PCIE_DCAP_EXT_TAG                 0x00000020   /* Extended Tag Field */
-+#define PCIE_DCAP_EP_L0S_LATENCY          0x000001C0   /* EP L0s latency only */
-+#define PCIE_DCAP_EP_L0S_LATENCY_S        6
-+#define PCIE_DCAP_EP_L1_LATENCY           0x00000E00   /* EP L1 latency only */
-+#define PCIE_DCAP_EP_L1_LATENCY_S         9
-+#define PCIE_DCAP_ROLE_BASE_ERR_REPORT    0x00008000   /* Role Based ERR */
-+
-+/* Maximum payload size supported */
-+enum {
-+    PCIE_MAX_PAYLOAD_128 = 0,
-+    PCIE_MAX_PAYLOAD_256,
-+    PCIE_MAX_PAYLOAD_512,
-+    PCIE_MAX_PAYLOAD_1024,
-+    PCIE_MAX_PAYLOAD_2048,
-+    PCIE_MAX_PAYLOAD_4096,
-+};
-+
-+/* Device Control and Status Register */
-+#define PCIE_DCTLSTS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
-+
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN        0x00000001   /* COR-ERR */
-+#define PCIE_DCTLSTS_NONFATAL_ERR_EN           0x00000002   /* Non-fatal ERR */
-+#define PCIE_DCTLSTS_FATAL_ERR_EN              0x00000004   /* Fatal ERR */
-+#define PCIE_DCTLSYS_UR_REQ_EN                 0x00000008   /* UR ERR */
-+#define PCIE_DCTLSTS_RELAXED_ORDERING_EN       0x00000010   /* Enable relaxing ordering */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE          0x000000E0   /* Max payload mask */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S        5
-+#define PCIE_DCTLSTS_EXT_TAG_EN                0x00000100   /* Extended tag field */
-+#define PCIE_DCTLSTS_PHANTOM_FUNC_EN           0x00000200   /* Phantom Function Enable */
-+#define PCIE_DCTLSTS_AUX_PM_EN                 0x00000400   /* AUX Power PM Enable */
-+#define PCIE_DCTLSTS_NO_SNOOP_EN               0x00000800   /* Enable no snoop, except root port*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE             0x00007000   /* Max Read Request size*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE_S           12
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR           0x00010000   /* COR-ERR Detected */
-+#define PCIE_DCTLSTS_NONFATAL_ERR              0x00020000   /* Non-Fatal ERR Detected */
-+#define PCIE_DCTLSTS_FATAL_ER                  0x00040000   /* Fatal ERR Detected */
-+#define PCIE_DCTLSTS_UNSUPPORTED_REQ           0x00080000   /* UR Detected */
-+#define PCIE_DCTLSTS_AUX_POWER                 0x00100000   /* Aux Power Detected */
-+#define PCIE_DCTLSTS_TRANSACT_PENDING          0x00200000   /* Transaction pending */
-+
-+#define PCIE_DCTLSTS_ERR_EN      (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
-+                                  PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
-+                                  PCIE_DCTLSYS_UR_REQ_EN)
-+
-+/* Link Capability Register */
-+#define PCIE_LCAP(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
-+#define PCIE_LCAP_MAX_LINK_SPEED               0x0000000F  /* Max link speed, 0x1 by default */
-+#define PCIE_LCAP_MAX_LINK_SPEED_S             0
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH             0x000003F0  /* Maxium Length Width */
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH_S           4
-+#define PCIE_LCAP_ASPM_LEVEL                   0x00000C00  /* Active State Link PM Support */
-+#define PCIE_LCAP_ASPM_LEVEL_S                 10
-+#define PCIE_LCAP_L0S_EIXT_LATENCY             0x00007000  /* L0s Exit Latency */
-+#define PCIE_LCAP_L0S_EIXT_LATENCY_S           12
-+#define PCIE_LCAP_L1_EXIT_LATENCY              0x00038000  /* L1 Exit Latency */
-+#define PCIE_LCAP_L1_EXIT_LATENCY_S            15
-+#define PCIE_LCAP_CLK_PM                       0x00040000  /* Clock Power Management */
-+#define PCIE_LCAP_SDER                         0x00080000  /* Surprise Down Error Reporting */
-+#define PCIE_LCAP_DLL_ACTIVE_REPROT            0x00100000  /* Data Link Layer Active Reporting Capable */
-+#define PCIE_LCAP_PORT_NUM                     0xFF0000000  /* Port number */
-+#define PCIE_LCAP_PORT_NUM_S                   24
-+
-+/* Maximum Length width definition */
-+#define PCIE_MAX_LENGTH_WIDTH_RES  0x00
-+#define PCIE_MAX_LENGTH_WIDTH_X1   0x01  /* Default */
-+#define PCIE_MAX_LENGTH_WIDTH_X2   0x02
-+#define PCIE_MAX_LENGTH_WIDTH_X4   0x04
-+#define PCIE_MAX_LENGTH_WIDTH_X8   0x08
-+#define PCIE_MAX_LENGTH_WIDTH_X12  0x0C
-+#define PCIE_MAX_LENGTH_WIDTH_X16  0x10
-+#define PCIE_MAX_LENGTH_WIDTH_X32  0x20
-+
-+/* Active State Link PM definition */
-+enum {
-+    PCIE_ASPM_RES0                = 0,
-+    PCIE_ASPM_L0S_ENTRY_SUPPORT,        /* L0s */
-+    PCIE_ASPM_RES1,
-+    PCIE_ASPM_L0S_L1_ENTRY_SUPPORT,     /* L0s and L1, default */
-+};
-+
-+/* L0s Exit Latency definition */
-+enum {
-+    PCIE_L0S_EIXT_LATENCY_L64NS    = 0, /* < 64 ns */
-+    PCIE_L0S_EIXT_LATENCY_B64A128,      /* > 64 ns < 128 ns */
-+    PCIE_L0S_EIXT_LATENCY_B128A256,     /* > 128 ns < 256 ns */
-+    PCIE_L0S_EIXT_LATENCY_B256A512,     /* > 256 ns < 512 ns */
-+    PCIE_L0S_EIXT_LATENCY_B512TO1U,     /* > 512 ns < 1 us */
-+    PCIE_L0S_EIXT_LATENCY_B1A2U,        /* > 1 us < 2 us */
-+    PCIE_L0S_EIXT_LATENCY_B2A4U,        /* > 2 us < 4 us */
-+    PCIE_L0S_EIXT_LATENCY_M4US,         /* > 4 us  */
-+};
-+
-+/* L1 Exit Latency definition */
-+enum {
-+    PCIE_L1_EXIT_LATENCY_L1US  = 0,  /* < 1 us */
-+    PCIE_L1_EXIT_LATENCY_B1A2,       /* > 1 us < 2 us */
-+    PCIE_L1_EXIT_LATENCY_B2A4,       /* > 2 us < 4 us */
-+    PCIE_L1_EXIT_LATENCY_B4A8,       /* > 4 us < 8 us */
-+    PCIE_L1_EXIT_LATENCY_B8A16,      /* > 8 us < 16 us */
-+    PCIE_L1_EXIT_LATENCY_B16A32,     /* > 16 us < 32 us */
-+    PCIE_L1_EXIT_LATENCY_B32A64,     /* > 32 us < 64 us */
-+    PCIE_L1_EXIT_LATENCY_M64US,      /* > 64 us */
-+};
-+
-+/* Link Control and Status Register */
-+#define PCIE_LCTLSTS(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
-+#define PCIE_LCTLSTS_ASPM_ENABLE            0x00000003  /* Active State Link PM Control */
-+#define PCIE_LCTLSTS_ASPM_ENABLE_S          0
-+#define PCIE_LCTLSTS_RCB128                 0x00000008  /* Read Completion Boundary 128*/
-+#define PCIE_LCTLSTS_LINK_DISABLE           0x00000010  /* Link Disable */
-+#define PCIE_LCTLSTS_RETRIAN_LINK           0x00000020  /* Retrain Link */
-+#define PCIE_LCTLSTS_COM_CLK_CFG            0x00000040  /* Common Clock Configuration */
-+#define PCIE_LCTLSTS_EXT_SYNC               0x00000080  /* Extended Synch */
-+#define PCIE_LCTLSTS_CLK_PM_EN              0x00000100  /* Enable Clock Powerm Management */
-+#define PCIE_LCTLSTS_LINK_SPEED             0x000F0000  /* Link Speed */
-+#define PCIE_LCTLSTS_LINK_SPEED_S           16
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH  0x03F00000  /* Negotiated Link Width */
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
-+#define PCIE_LCTLSTS_RETRAIN_PENDING        0x08000000  /* Link training is ongoing */
-+#define PCIE_LCTLSTS_SLOT_CLK_CFG           0x10000000  /* Slot Clock Configuration */
-+#define PCIE_LCTLSTS_DLL_ACTIVE             0x20000000  /* Data Link Layer Active */
-+
-+/* Slot Capabilities Register */
-+#define PCIE_SLCAP(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
-+
-+/* Slot Capabilities */
-+#define PCIE_SLCTLSTS(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
-+
-+/* Root Control and Capability Register */
-+#define PCIE_RCTLCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
-+#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR  0x00000001   /* #SERR on COR-ERR */
-+#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR     0x00000002   /* #SERR on Non-Fatal ERR */
-+#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR        0x00000004   /* #SERR on Fatal ERR */
-+#define PCIE_RCTLCAP_PME_INT_EN               0x00000008   /* PME Interrupt Enable */
-+#define PCIE_RCTLCAP_SERR_ENABLE    (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
-+                                     PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
-+/* Root Status Register */
-+#define PCIE_RSTS(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
-+#define PCIE_RSTS_PME_REQ_ID                   0x0000FFFF   /* PME Request ID */
-+#define PCIE_RSTS_PME_REQ_ID_S                 0
-+#define PCIE_RSTS_PME_STATUS                   0x00010000   /* PME Status */
-+#define PCIE_RSTS_PME_PENDING                  0x00020000   /* PME Pending */
-+
-+/* PCI Express Enhanced Capability Header */
-+#define PCIE_ENHANCED_CAP(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
-+#define PCIE_ENHANCED_CAP_ID                 0x0000FFFF  /* PCI Express Extended Capability ID */
-+#define PCIE_ENHANCED_CAP_ID_S               0
-+#define PCIE_ENHANCED_CAP_VER                0x000F0000  /* Capability Version */
-+#define PCIE_ENHANCED_CAP_VER_S              16
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET        0xFFF00000  /* Next Capability Offset */
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S      20
-+
-+/* Uncorrectable Error Status Register */
-+#define PCIE_UES_R(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
-+#define PCIE_DATA_LINK_PROTOCOL_ERR          0x00000010  /* Data Link Protocol Error Status */
-+#define PCIE_SURPRISE_DOWN_ERROR             0x00000020  /* Surprise Down Error Status */
-+#define PCIE_POISONED_TLP                    0x00001000  /* Poisoned TLP Status */
-+#define PCIE_FC_PROTOCOL_ERR                 0x00002000  /* Flow Control Protocol Error Status */
-+#define PCIE_COMPLETION_TIMEOUT              0x00004000  /* Completion Timeout Status */
-+#define PCIE_COMPLETOR_ABORT                 0x00008000  /* Completer Abort Error */
-+#define PCIE_UNEXPECTED_COMPLETION           0x00010000  /* Unexpected Completion Status */
-+#define PCIE_RECEIVER_OVERFLOW               0x00020000  /* Receive Overflow Status */
-+#define PCIE_MALFORNED_TLP                   0x00040000  /* Malformed TLP Stauts */
-+#define PCIE_ECRC_ERR                        0x00080000  /* ECRC Error Stauts */
-+#define PCIE_UR_REQ                          0x00100000  /* Unsupported Request Error Status */
-+#define PCIE_ALL_UNCORRECTABLE_ERR    (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
-+                         PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT |   \
-+                         PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
-+                         PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
-+
-+/* Uncorrectable Error Mask Register, Mask means no report */
-+#define PCIE_UEMR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
-+
-+/* Uncorrectable Error Severity Register */
-+#define PCIE_UESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
-+
-+/* Correctable Error Status Register */
-+#define PCIE_CESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
-+#define PCIE_RX_ERR                          0x00000001  /* Receive Error Status */
-+#define PCIE_BAD_TLP                         0x00000040  /* Bad TLP Status */
-+#define PCIE_BAD_DLLP                        0x00000080  /* Bad DLLP Status */
-+#define PCIE_REPLAY_NUM_ROLLOVER             0x00000100  /* Replay Number Rollover Status */
-+#define PCIE_REPLAY_TIMER_TIMEOUT_ERR        0x00001000  /* Reply Timer Timeout Status */
-+#define PCIE_ADVISORY_NONFTAL_ERR            0x00002000  /* Advisory Non-Fatal Error Status */
-+#define PCIE_CORRECTABLE_ERR        (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
-+                                     PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
-+
-+/* Correctable Error Mask Register */
-+#define PCIE_CEMR(X)                        (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
-+
-+/* Advanced Error Capabilities and Control Register */
-+#define PCIE_AECCR(X)                       (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
-+#define PCIE_AECCR_FIRST_ERR_PTR            0x0000001F  /* First Error Pointer */
-+#define PCIE_AECCR_FIRST_ERR_PTR_S          0
-+#define PCIE_AECCR_ECRC_GEN_CAP             0x00000020  /* ECRC Generation Capable */
-+#define PCIE_AECCR_ECRC_GEN_EN              0x00000040  /* ECRC Generation Enable */
-+#define PCIE_AECCR_ECRC_CHECK_CAP           0x00000080  /* ECRC Check Capable */
-+#define PCIE_AECCR_ECRC_CHECK_EN            0x00000100  /* ECRC Check Enable */
-+
-+/* Header Log Register 1 */
-+#define PCIE_HLR1(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
-+
-+/* Header Log Register 2 */
-+#define PCIE_HLR2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
-+
-+/* Header Log Register 3 */
-+#define PCIE_HLR3(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
-+
-+/* Header Log Register 4 */
-+#define PCIE_HLR4(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
-+
-+/* Root Error Command Register */
-+#define PCIE_RECR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
-+#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN  0x00000001 /* COR-ERR */
-+#define PCIE_RECR_NONFATAL_ERR_REPORT_EN     0x00000002 /* Non-Fatal ERR */
-+#define PCIE_RECR_FATAL_ERR_REPORT_EN        0x00000004 /* Fatal ERR */
-+#define PCIE_RECR_ERR_REPORT_EN  (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
-+                PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
-+
-+/* Root Error Status Register */
-+#define PCIE_RESR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
-+#define PCIE_RESR_CORRECTABLE_ERR                0x00000001   /* COR-ERR Receveid */
-+#define PCIE_RESR_MULTI_CORRECTABLE_ERR          0x00000002   /* Multiple COR-ERR Received */
-+#define PCIE_RESR_FATAL_NOFATAL_ERR              0x00000004   /* ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR        0x00000008   /* Multiple ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR  0x00000010   /* First UN-COR Fatal */
-+#define PCIR_RESR_NON_FATAL_ERR                  0x00000020   /* Non-Fatal Error Message Received */
-+#define PCIE_RESR_FATAL_ERR                      0x00000040   /* Fatal Message Received */
-+#define PCIE_RESR_AER_INT_MSG_NUM                0xF8000000   /* Advanced Error Interrupt Message Number */
-+#define PCIE_RESR_AER_INT_MSG_NUM_S              27
-+
-+/* Error Source Indentification Register */
-+#define PCIE_ESIR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID         0x0000FFFF
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S       0
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID         0xFFFF0000
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S       16
-+
-+/* VC Enhanced Capability Header */
-+#define PCIE_VC_ECH(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
-+
-+/* Port VC Capability Register */
-+#define PCIE_PVC1(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
-+#define PCIE_PVC1_EXT_VC_CNT                    0x00000007  /* Extended VC Count */
-+#define PCIE_PVC1_EXT_VC_CNT_S                  0
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT            0x00000070  /* Low Priority Extended VC Count */
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S          4
-+#define PCIE_PVC1_REF_CLK                       0x00000300  /* Reference Clock */
-+#define PCIE_PVC1_REF_CLK_S                     8
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE       0x00000C00  /* Port Arbitration Table Entry Size */
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S     10
-+
-+/* Extended Virtual Channel Count Defintion */
-+#define PCIE_EXT_VC_CNT_MIN   0
-+#define PCIE_EXT_VC_CNT_MAX   7
-+
-+/* Port Arbitration Table Entry Size Definition */
-+enum {
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
-+};
-+
-+/* Port VC Capability Register 2 */
-+#define PCIE_PVC2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
-+#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR      0x00000001  /* HW Fixed arbitration, 16 phase WRR */
-+#define PCIE_PVC2_VC_ARB_32P_WRR            0x00000002  /* 32 phase WRR */
-+#define PCIE_PVC2_VC_ARB_64P_WRR            0x00000004  /* 64 phase WRR */
-+#define PCIE_PVC2_VC_ARB_128P_WRR           0x00000008  /* 128 phase WRR */
-+#define PCIE_PVC2_VC_ARB_WRR                0x0000000F
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET         0xFF000000  /* VC arbitration table offset, not support */
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S       24
-+
-+/* Port VC Control and Status Register */     
-+#define PCIE_PVCCRSR(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
-+#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB         0x00000001  /* Load VC Arbitration Table */
-+#define PCIE_PVCCRSR_VC_ARB_SEL              0x0000000E  /* VC Arbitration Select */
-+#define PCIE_PVCCRSR_VC_ARB_SEL_S            1
-+#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS       0x00010000  /* Arbitration Status */
-+
-+/* VC0 Resource Capability Register */
-+#define PCIE_VC0_RC(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
-+#define PCIE_VC0_RC_PORT_ARB_HW_FIXED        0x00000001  /* HW Fixed arbitration */
-+#define PCIE_VC0_RC_PORT_ARB_32P_WRR         0x00000002  /* 32 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_64P_WRR         0x00000004  /* 64 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_128P_WRR        0x00000008  /* 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR     0x00000010  /* Time-based 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR     0x00000020  /* Time-based 256 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB          (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
-+                        PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
-+                        PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
-+
-+#define PCIE_VC0_RC_REJECT_SNOOP             0x00008000  /* Reject Snoop Transactioin */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS            0x007F0000  /* Maximum time Slots */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS_S          16
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET      0xFF000000  /* Port Arbitration Table Offset */
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S    24
-+
-+/* VC0 Resource Control Register */
-+#define PCIE_VC0_RC0(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
-+#define PCIE_VC0_RC0_TVM0                    0x00000001  /* TC0 and VC0 */
-+#define PCIE_VC0_RC0_TVM1                    0x00000002  /* TC1 and VC1 */
-+#define PCIE_VC0_RC0_TVM2                    0x00000004  /* TC2 and VC2 */
-+#define PCIE_VC0_RC0_TVM3                    0x00000008  /* TC3 and VC3 */
-+#define PCIE_VC0_RC0_TVM4                    0x00000010  /* TC4 and VC4 */
-+#define PCIE_VC0_RC0_TVM5                    0x00000020  /* TC5 and VC5 */
-+#define PCIE_VC0_RC0_TVM6                    0x00000040  /* TC6 and VC6 */
-+#define PCIE_VC0_RC0_TVM7                    0x00000080  /* TC7 and VC7 */
-+#define PCIE_VC0_RC0_TC_VC                   0x000000FF  /* TC/VC mask */
-+
-+#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB       0x00010000  /* Load Port Arbitration Table */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL            0x000E0000  /* Port Arbitration Select */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL_S          17
-+#define PCIE_VC0_RC0_VC_ID                   0x07000000  /* VC ID */
-+#define PCIE_VC0_RC0_VC_ID_S                 24
-+#define PCIE_VC0_RC0_VC_EN                   0x80000000  /* VC Enable */
-+
-+/* VC0 Resource Status Register */
-+#define PCIE_VC0_RSR0(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
-+#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS    0x00010000  /* Port Arbitration Table Status,not used */
-+#define PCIE_VC0_RSR0_VC_NEG_PENDING         0x00020000  /* VC Negotiation Pending */
-+
-+/* Ack Latency Timer and Replay Timer Register */
-+#define PCIE_ALTRT(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT   0x0000FFFF  /* Round Trip Latency Time Limit */
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT          0xFFFF0000  /* Replay Time Limit */
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S        16
-+
-+/* Other Message Register */
-+#define PCIE_OMR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
-+
-+/* Port Force Link Register */
-+#define PCIE_PFLR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
-+#define PCIE_PFLR_LINK_NUM                   0x000000FF  /* Link Number */
-+#define PCIE_PFLR_LINK_NUM_S                 0
-+#define PCIE_PFLR_FORCE_LINK                 0x00008000  /* Force link */
-+#define PCIE_PFLR_LINK_STATE                 0x003F0000  /* Link State */
-+#define PCIE_PFLR_LINK_STATE_S               16
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT        0xFF000000  /* Low Power Entrance Count, only for EP */
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S      24
-+
-+/* Ack Frequency Register */
-+#define PCIE_AFR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
-+#define PCIE_AFR_AF                          0x000000FF  /* Ack Frequency */
-+#define PCIE_AFR_AF_S                        0
-+#define PCIE_AFR_FTS_NUM                     0x0000FF00  /* The number of Fast Training Sequence from L0S to L0 */
-+#define PCIE_AFR_FTS_NUM_S                   8
-+#define PCIE_AFR_COM_FTS_NUM                 0x00FF0000  /* N_FTS; when common clock is used*/
-+#define PCIE_AFR_COM_FTS_NUM_S               16
-+#define PCIE_AFR_L0S_ENTRY_LATENCY           0x07000000  /* L0s Entrance Latency */
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_S         24
-+#define PCIE_AFR_L1_ENTRY_LATENCY            0x38000000  /* L1 Entrance Latency */
-+#define PCIE_AFR_L1_ENTRY_LATENCY_S          27
-+#define PCIE_AFR_FTS_NUM_DEFAULT             32
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT   7
-+#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT    5
-+
-+/* Port Link Control Register */
-+#define PCIE_PLCR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
-+#define PCIE_PLCR_OTHER_MSG_REQ              0x00000001  /* Other Message Request */
-+#define PCIE_PLCR_SCRAMBLE_DISABLE           0x00000002  /* Scramble Disable */  
-+#define PCIE_PLCR_LOOPBACK_EN                0x00000004  /* Loopback Enable */
-+#define PCIE_PLCR_LTSSM_HOT_RST              0x00000008  /* Force LTSSM to the hot reset */
-+#define PCIE_PLCR_DLL_LINK_EN                0x00000020  /* Enable Link initialization */
-+#define PCIE_PLCR_FAST_LINK_SIM_EN           0x00000080  /* Sets all internal timers to fast mode for simulation purposes */
-+#define PCIE_PLCR_LINK_MODE                  0x003F0000  /* Link Mode Enable Mask */
-+#define PCIE_PLCR_LINK_MODE_S                16
-+#define PCIE_PLCR_CORRUPTED_CRC_EN           0x02000000  /* Enabled Corrupt CRC */
-+
-+/* Lane Skew Register */
-+#define PCIE_LSR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
-+#define PCIE_LSR_LANE_SKEW_NUM               0x00FFFFFF  /* Insert Lane Skew for Transmit, not applicable */
-+#define PCIE_LSR_LANE_SKEW_NUM_S             0
-+#define PCIE_LSR_FC_DISABLE                  0x01000000  /* Disable of Flow Control */
-+#define PCIE_LSR_ACKNAK_DISABLE              0x02000000  /* Disable of Ack/Nak */
-+#define PCIE_LSR_LANE_DESKEW_DISABLE         0x80000000  /* Disable of Lane-to-Lane Skew */
-+
-+/* Symbol Number Register */
-+#define PCIE_SNR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
-+#define PCIE_SNR_TS                          0x0000000F  /* Number of TS Symbol */
-+#define PCIE_SNR_TS_S                        0
-+#define PCIE_SNR_SKP                         0x00000700  /* Number of SKP Symbol */
-+#define PCIE_SNR_SKP_S                       8
-+#define PCIE_SNR_REPLAY_TIMER                0x0007C000  /* Timer Modifier for Replay Timer */
-+#define PCIE_SNR_REPLAY_TIMER_S              14
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER        0x00F80000  /* Timer Modifier for Ack/Nak Latency Timer */
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S      19
-+#define PCIE_SNR_FC_TIMER                    0x1F000000  /* Timer Modifier for Flow Control Watchdog Timer */
-+#define PCIE_SNR_FC_TIMER_S                  28
-+
-+/* Symbol Timer Register and Filter Mask Register 1 */
-+#define PCIE_STRFMR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
-+#define PCIE_STRFMR_SKP_INTERVAL            0x000007FF  /* SKP lnterval Value */
-+#define PCIE_STRFMR_SKP_INTERVAL_S          0
-+#define PCIE_STRFMR_FC_WDT_DISABLE          0x00008000  /* Disable of FC Watchdog Timer */
-+#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK    0x00010000  /* Mask Function Mismatch Filtering for Incoming Requests */
-+#define PCIE_STRFMR_POISONED_TLP_OK         0x00020000  /* Mask Poisoned TLP Filtering */
-+#define PCIE_STRFMR_BAR_MATCH_OK            0x00040000  /* Mask BAR Match Filtering */
-+#define PCIE_STRFMR_TYPE1_CFG_REQ_OK        0x00080000  /* Mask Type 1 Configuration Request Filtering */
-+#define PCIE_STRFMR_LOCKED_REQ_OK           0x00100000  /* Mask Locked Request Filtering */
-+#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK    0x00200000  /* Mask Tag Error Rules for Received Completions */
-+#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000  /* Mask Requester ID Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK         0x00800000  /* Mask Function Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_TC_MISMATCH_OK           0x01000000  /* Mask Traffic Class Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK         0x02000000  /* Mask Attribute Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK       0x04000000  /* Mask Length Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_TLP_ECRC_ERR_OK              0x08000000  /* Mask ECRC Error Filtering */
-+#define PCIE_STRFMR_CPL_TLP_ECRC_OK              0x10000000  /* Mask ECRC Error Filtering for Completions */
-+#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP           0x20000000  /* Send Message TLPs */
-+#define PCIE_STRFMR_RX_IO_TRANS_ENABLE           0x40000000  /* Mask Filtering of received I/O Requests */
-+#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE          0x80000000  /* Mask Filtering of Received Configuration Requests */
-+
-+#define PCIE_DEF_SKP_INTERVAL    700             /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
-+
-+/* Filter Masker Register 2 */
-+#define PCIE_FMR2(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
-+#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1    0x00000001  /* Mask RADM Filtering and Error Handling Rules */
-+#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1    0x00000002  /* Mask RADM Filtering and Error Handling Rules */
-+
-+/* Debug Register 0 */
-+#define PCIE_DBR0(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
-+
-+/* Debug Register 1 */
-+#define PCIE_DBR1(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
-+
-+/* Transmit Posted FC Credit Status Register */
-+#define PCIE_TPFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS           0x00000FFF /* Transmit Posted Data FC Credits */
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S         0
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS            0x000FF000 /* Transmit Posted Header FC Credits */
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S          12
-+
-+/* Transmit Non-Posted FC Credit Status */
-+#define PCIE_TNPFCS(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS         0x00000FFF /* Transmit Non-Posted Data FC Credits */
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S       0
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS          0x000FF000 /* Transmit Non-Posted Header FC Credits */
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S        12
-+
-+/* Transmit Complete FC Credit Status Register */
-+#define PCIE_TCFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS         0x00000FFF /* Transmit Completion Data FC Credits */
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S       0
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS          0x000FF000 /* Transmit Completion Header FC Credits */
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S        12
-+
-+/* Queue Status Register */
-+#define PCIE_QSR(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
-+#define PCIE_QSR_WAIT_UPDATE_FC_DLL               0x00000001 /* Received TLP FC Credits Not Returned */
-+#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY           0x00000002 /* Transmit Retry Buffer Not Empty */
-+#define PCIE_QSR_RX_QUEUE_NOT_EMPTY               0x00000004 /* Received Queue Not Empty */
-+
-+/* VC Transmit Arbitration Register 1 */
-+#define PCIE_VCTAR1(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC0               0x000000FF /* WRR Weight for VC0 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC1               0x0000FF00 /* WRR Weight for VC1 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC2               0x00FF0000 /* WRR Weight for VC2 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC3               0xFF000000 /* WRR Weight for VC3 */
-+
-+/* VC Transmit Arbitration Register 2 */
-+#define PCIE_VCTAR2(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC4               0x000000FF /* WRR Weight for VC4 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC5               0x0000FF00 /* WRR Weight for VC5 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC6               0x00FF0000 /* WRR Weight for VC6 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC7               0xFF000000 /* WRR Weight for VC7 */
-+
-+/* VC0 Posted Receive Queue Control Register */
-+#define PCIE_VC0_PRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS            0x00000FFF /* VC0 Posted Data Credits */
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S          0
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS             0x000FF000 /* VC0 Posted Header Credits */
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S           12
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE          0x00E00000 /* VC0 Posted TLP Queue Mode */
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S        20
-+#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER           0x40000000 /* TLP Type Ordering for VC0 */    
-+#define PCIE_VC0_PRQCR_VC_STRICT_ORDER           0x80000000 /* VC0 Ordering for Receive Queues */
-+
-+/* VC0 Non-Posted Receive Queue Control */
-+#define PCIE_VC0_NPRQCR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS          0x00000FFF /* VC0 Non-Posted Data Credits */
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S        0
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS           0x000FF000 /* VC0 Non-Posted Header Credits */
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S         12
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE        0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S      20
-+
-+/* VC0 Completion Receive Queue Control */
-+#define PCIE_VC0_CRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS          0x00000FFF /* VC0 Completion TLP Queue Mode */
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S        0
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS           0x000FF000 /* VC0 Completion Header Credits */
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S         12
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE        0x00E00000 /* VC0 Completion Data Credits */
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S      21
-+
-+/* Applicable to the above three registers */
-+enum {
-+    PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
-+    PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH   = 2,
-+    PCIE_VC0_TLP_QUEUE_MODE_BYPASS        = 4,
-+};
-+
-+/* VC0 Posted Buffer Depth Register */
-+#define PCIE_VC0_PBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES       0x00003FFF /* VC0 Posted Data Queue Depth */
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S     0
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES        0x03FF0000 /* VC0 Posted Header Queue Depth */
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S      16
-+
-+/* VC0 Non-Posted Buffer Depth Register */
-+#define PCIE_VC0_NPBD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES     0x00003FFF /* VC0 Non-Posted Data Queue Depth */
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S   0
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S    16
-+
-+/* VC0 Completion Buffer Depth Register */
-+#define PCIE_VC0_CBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES     0x00003FFF /* C0 Completion Data Queue Depth */
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S   0
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Completion Header Queue Depth */
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S    16
-+
-+/* PHY Status Register, all zeros in VR9 */
-+#define PCIE_PHYSR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
-+
-+/* PHY Control Register, all zeros in VR9 */
-+#define PCIE_PHYCR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
-+
-+/* 
-+ * PCIe PDI PHY register definition, suppose all the following 
-+ * stuff is confidential. 
-+ * XXX, detailed bit definition
-+ */
-+#define	PCIE_PHY_PLL_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
-+#define	PCIE_PHY_PLL_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
-+#define	PCIE_PHY_PLL_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
-+#define	PCIE_PHY_PLL_CTRL4(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
-+#define	PCIE_PHY_PLL_CTRL5(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
-+#define	PCIE_PHY_PLL_CTRL6(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
-+#define	PCIE_PHY_PLL_CTRL7(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
-+#define	PCIE_PHY_PLL_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
-+#define	PCIE_PHY_PLL_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
-+#define	PCIE_PHY_PLL_A_CTRL3(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
-+#define	PCIE_PHY_PLL_STATUS(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
-+ 
-+#define PCIE_PHY_TX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
-+#define PCIE_PHY_TX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
-+#define PCIE_PHY_TX1_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
-+#define PCIE_PHY_TX1_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
-+#define PCIE_PHY_TX1_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
-+#define PCIE_PHY_TX1_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
-+#define PCIE_PHY_TX1_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
-+#define PCIE_PHY_TX1_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
-+
-+#define PCIE_PHY_TX2_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
-+#define PCIE_PHY_TX2_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
-+#define PCIE_PHY_TX2_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
-+#define PCIE_PHY_TX2_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
-+#define PCIE_PHY_TX2_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
-+#define PCIE_PHY_TX2_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
-+#define PCIE_PHY_TX2_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
-+
-+#define PCIE_PHY_RX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
-+#define PCIE_PHY_RX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
-+#define PCIE_PHY_RX1_CDR(X)         (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
-+#define PCIE_PHY_RX1_EI(X)          (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
-+#define PCIE_PHY_RX1_A_CTRL(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
-+
-+/* Interrupt related stuff */
-+#define PCIE_LEGACY_DISABLE 0
-+#define PCIE_LEGACY_INTA  1
-+#define PCIE_LEGACY_INTB  2
-+#define PCIE_LEGACY_INTC  3
-+#define PCIE_LEGACY_INTD  4
-+#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
-+
-+#endif /* IFXMIPS_PCIE_REG_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_vr9.h
-@@ -0,0 +1,269 @@
-+/****************************************************************************
-+                              Copyright (c) 2010
-+                            Lantiq Deutschland GmbH
-+                     Am Campeon 3; 85579 Neubiberg, Germany
-+
-+  For licensing information, see the file 'LICENSE' in the root folder of
-+  this software module.
-+
-+ *****************************************************************************/
-+/*!
-+  \file ifxmips_pcie_vr9.h
-+  \ingroup IFX_PCIE
-+  \brief PCIe RC driver vr9 specific file
-+*/
-+
-+#ifndef IFXMIPS_PCIE_VR9_H
-+#define IFXMIPS_PCIE_VR9_H
-+
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+
-+#include <linux/gpio.h>
-+#include <lantiq_soc.h>
-+
-+#define IFX_PCIE_GPIO_RESET  494
-+
-+#define IFX_REG_R32    ltq_r32
-+#define IFX_REG_W32    ltq_w32
-+#define CONFIG_IFX_PCIE_HW_SWAP
-+#define IFX_RCU_AHB_ENDIAN                      ((volatile u32*)(IFX_RCU + 0x004C))
-+#define IFX_RCU_RST_REQ                         ((volatile u32*)(IFX_RCU + 0x0010))
-+#define IFX_RCU_AHB_BE_PCIE_PDI                  0x00000080  /* Configure PCIE PDI module in big endian*/
-+
-+#define IFX_RCU                                 (KSEG1 | 0x1F203000)
-+#define IFX_RCU_AHB_BE_PCIE_M                    0x00000001  /* Configure AHB master port that connects to PCIe RC in big endian */
-+#define IFX_RCU_AHB_BE_PCIE_S                    0x00000010  /* Configure AHB slave port that connects to PCIe RC in little endian */
-+#define IFX_RCU_AHB_BE_XBAR_M                    0x00000002  /* Configure AHB master port that connects to XBAR in big endian */
-+#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+
-+#define IFX_PMU1_MODULE_PCIE_PHY   (0)
-+#define IFX_PMU1_MODULE_PCIE_CTRL  (1)
-+#define IFX_PMU1_MODULE_PDI        (4)
-+#define IFX_PMU1_MODULE_MSI        (5)
-+
-+#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
-+
-+
-+#define IFX_GPIO				(KSEG1 | 0x1E100B00)
-+#define ALT0			((volatile u32*)(IFX_GPIO + 0x007c))
-+#define ALT1			((volatile u32*)(IFX_GPIO + 0x0080))
-+#define OD			((volatile u32*)(IFX_GPIO + 0x0084))
-+#define DIR			((volatile u32*)(IFX_GPIO + 0x0078))
-+#define OUT			((volatile u32*)(IFX_GPIO + 0x0070))
-+
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+
-+	gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset");
-+	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
-+	gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+
-+/*    ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void) 
-+{
-+	/* Enable AHB bus master/slave */
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "ahb");
-+	clk_enable(clk);
-+
-+    //AHBM_PMU_SETUP(IFX_PMU_ENABLE);
-+    //AHBS_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+    reg |= IFX_RCU_AHB_BE_PCIE_M;
-+    reg |= IFX_RCU_AHB_BE_PCIE_S;
-+    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#else 
-+    reg |= IFX_RCU_AHB_BE_PCIE_M;
-+    reg &= ~IFX_RCU_AHB_BE_PCIE_S;
-+    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "phy");
-+	clk_enable(clk);
-+
-+	//PCIE_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "phy");
-+	clk_disable(clk);
-+
-+//    PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* SRAM2PDI endianness control. */
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+    /* Config AHB->PCIe and PDI endianness */
-+    reg |= IFX_RCU_AHB_BE_PCIE_PDI;
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+    /* Enable PDI to access PCIe PHY register */
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "pdi");
-+	clk_enable(clk);
-+    //PDI_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+    /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly  */
-+    reg |= 0x00400000;
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    /* Reset PCIe PHY & Core, bit 22 */
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg &= ~0x00400000;
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg |= 0x00001000; /* Bit 12 */
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg &= ~0x00001000; /* Bit 12 */
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+	gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
-+//    ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+    mdelay(100);
-+	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
-+//    gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+    //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "ctl");
-+	clk_enable(clk);
-+	clk = clk_get_sys("1d900000.pcie", "bus");
-+	clk_enable(clk);
-+
-+    /* PCIe Core controller enabled */
-+//    PCIE_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+
-+    /* Enable PCIe L0 Clock */
-+//  PCIE_L0_CLK_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+	struct clk *clk;
-+	pcie_msi_pic_init(pcie_port);
-+	clk = clk_get_sys("ltq_pcie", "msi");
-+	clk_enable(clk);
-+//    MSI_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+    u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_PCI_LANTIQ
-+    if (pcibios_host_nr() > 1) {
-+        tbus_number -= pcibios_1st_host_bus_nr();
-+    }
-+#endif /* CONFIG_PCI_LANTIQ */
-+    return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+    struct pci_dev *pdev;
-+    u32 tvalue = value;
-+
-+    /* Sanity check */
-+    pdev = pci_get_slot(bus, devfn);
-+    if (pdev == NULL) {
-+        return tvalue;
-+    }
-+
-+    /* Only care about PCI bridge */
-+    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+        return tvalue;
-+    }
-+
-+    if (read) { /* Read hack */
-+    #ifdef CONFIG_PCI_LANTIQ
-+        if (pcibios_host_nr() > 1) {
-+            tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+        }
-+    #endif /* CONFIG_PCI_LANTIQ */
-+    }
-+    else { /* Write hack */
-+    #ifdef CONFIG_PCI_LANTIQ
-+        if (pcibios_host_nr() > 1) {
-+            tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+        }
-+    #endif
-+    }
-+    return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_VR9_H */
-+
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -251,6 +251,31 @@ static int __init pcibios_init(void)
- 
- subsys_initcall(pcibios_init);
- 
-+int pcibios_host_nr(void)
-+{
-+    int count;
-+    struct pci_controller *hose;
-+    for (count = 0, hose = hose_head; hose; hose = hose->next, count++) {
-+        ;
-+    }
-+    return count;
-+}
-+EXPORT_SYMBOL(pcibios_host_nr);
-+
-+int pcibios_1st_host_bus_nr(void)
-+{
-+    int bus_nr = 0;
-+    struct pci_controller *hose = hose_head;
-+
-+    if (hose != NULL) {
-+        if (hose->bus != NULL) {
-+            bus_nr = hose->bus->number + 1;
-+        }
-+    }
-+    return bus_nr;
-+}
-+EXPORT_SYMBOL(pcibios_1st_host_bus_nr);
-+
- static int pcibios_enable_resources(struct pci_dev *dev, int mask)
- {
- 	u16 cmd, old_cmd;
---- /dev/null
-+++ b/arch/mips/pci/pcie-lantiq.h
-@@ -0,0 +1,1305 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_reg.h
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_REG_H
-+#define IFXMIPS_PCIE_REG_H
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+/*!
-+ \file ifxmips_pcie_reg.h
-+ \ingroup IFX_PCIE  
-+ \brief header file for PCIe module register definition
-+*/
-+/* PCIe Address Mapping Base */
-+#define PCIE_CFG_PHY_BASE        0x1D000000UL
-+#define PCIE_CFG_BASE           (KSEG1 + PCIE_CFG_PHY_BASE)
-+#define PCIE_CFG_SIZE           (8 * 1024 * 1024)
-+
-+#define PCIE_MEM_PHY_BASE        0x1C000000UL
-+#define PCIE_MEM_BASE           (KSEG1 + PCIE_MEM_PHY_BASE)
-+#define PCIE_MEM_SIZE           (16 * 1024 * 1024)
-+#define PCIE_MEM_PHY_END        (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
-+
-+#define PCIE_IO_PHY_BASE         0x1D800000UL
-+#define PCIE_IO_BASE            (KSEG1 + PCIE_IO_PHY_BASE)
-+#define PCIE_IO_SIZE            (1 * 1024 * 1024)
-+#define PCIE_IO_PHY_END         (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
-+
-+#define PCIE_RC_CFG_BASE        (KSEG1 + 0x1D900000)
-+#define PCIE_APP_LOGIC_REG      (KSEG1 + 0x1E100900)
-+#define PCIE_MSI_PHY_BASE        0x1F600000UL
-+
-+#define PCIE_PDI_PHY_BASE        0x1F106800UL
-+#define PCIE_PDI_BASE           (KSEG1 + PCIE_PDI_PHY_BASE)
-+#define PCIE_PDI_SIZE            0x400
-+
-+#define PCIE1_CFG_PHY_BASE        0x19000000UL
-+#define PCIE1_CFG_BASE           (KSEG1 + PCIE1_CFG_PHY_BASE)
-+#define PCIE1_CFG_SIZE           (8 * 1024 * 1024)
-+
-+#define PCIE1_MEM_PHY_BASE        0x18000000UL
-+#define PCIE1_MEM_BASE           (KSEG1 + PCIE1_MEM_PHY_BASE)
-+#define PCIE1_MEM_SIZE           (16 * 1024 * 1024)
-+#define PCIE1_MEM_PHY_END        (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
-+
-+#define PCIE1_IO_PHY_BASE         0x19800000UL
-+#define PCIE1_IO_BASE            (KSEG1 + PCIE1_IO_PHY_BASE)
-+#define PCIE1_IO_SIZE            (1 * 1024 * 1024)
-+#define PCIE1_IO_PHY_END         (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
-+
-+#define PCIE1_RC_CFG_BASE        (KSEG1 + 0x19900000)
-+#define PCIE1_APP_LOGIC_REG      (KSEG1 + 0x1E100700)
-+#define PCIE1_MSI_PHY_BASE        0x1F400000UL
-+
-+#define PCIE1_PDI_PHY_BASE        0x1F700400UL
-+#define PCIE1_PDI_BASE           (KSEG1 + PCIE1_PDI_PHY_BASE)
-+#define PCIE1_PDI_SIZE            0x400
-+
-+#define PCIE_CFG_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
-+#define PCIE_MEM_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
-+#define PCIE_IO_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_END(X)  ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
-+#define PCIE_IO_PHY_PORT_TO_BASE(X)  ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
-+#define PCIE_IO_PHY_PORT_TO_END(X)   ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
-+#define PCIE_APP_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
-+#define PCIE_RC_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
-+#define PCIE_PHY_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
-+
-+/* PCIe Application Logic Register */
-+/* RC Core Control Register */
-+#define PCIE_RC_CCR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
-+/* This should be enabled after initializing configuratin registers
-+ * Also should check link status retraining bit
-+ */
-+#define PCIE_RC_CCR_LTSSM_ENABLE             0x00000001    /* Enable LTSSM to continue link establishment */
-+
-+/* RC Core Debug Register */
-+#define PCIE_RC_DR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
-+#define PCIE_RC_DR_DLL_UP                    0x00000001  /* Data Link Layer Up */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE       0x0000000E  /* Current Power State */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE_S     1
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE       0x000001F0  /* Current LTSSM State */
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S     4
-+
-+#define PCIE_RC_DR_PM_DEV_STATE              0x00000E00  /* Power Management D-State */
-+#define PCIE_RC_DR_PM_DEV_STATE_S            9
-+
-+#define PCIE_RC_DR_PM_ENABLED                0x00001000  /* Power Management State from PMU */
-+#define PCIE_RC_DR_PME_EVENT_ENABLED         0x00002000  /* Power Management Event Enable State */
-+#define PCIE_RC_DR_AUX_POWER_ENABLED         0x00004000  /* Auxiliary Power Enable */
-+
-+/* Current Power State Definition */
-+enum {
-+    PCIE_RC_DR_D0 = 0,
-+    PCIE_RC_DR_D1,   /* Not supported */
-+    PCIE_RC_DR_D2,   /* Not supported */
-+    PCIE_RC_DR_D3,
-+    PCIE_RC_DR_UN,
-+};
-+
-+/* PHY Link Status Register */
-+#define PCIE_PHY_SR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
-+#define PCIE_PHY_SR_PHY_LINK_UP              0x00000001   /* PHY Link Up/Down Indicator */
-+
-+/* Electromechanical Control Register */
-+#define PCIE_EM_CR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
-+#define PCIE_EM_CR_CARD_IS_PRESENT           0x00000001  /* Card Presence Detect State */
-+#define PCIE_EM_CR_MRL_OPEN                  0x00000002  /* MRL Sensor State */
-+#define PCIE_EM_CR_POWER_FAULT_SET           0x00000004  /* Power Fault Detected */
-+#define PCIE_EM_CR_MRL_SENSOR_SET            0x00000008  /* MRL Sensor Changed */
-+#define PCIE_EM_CR_PRESENT_DETECT_SET        0x00000010  /* Card Presense Detect Changed */
-+#define PCIE_EM_CR_CMD_CPL_INT_SET           0x00000020  /* Command Complete Interrupt */
-+#define PCIE_EM_CR_SYS_INTERLOCK_SET         0x00000040  /* System Electromechanical IterLock Engaged */
-+#define PCIE_EM_CR_ATTENTION_BUTTON_SET      0x00000080  /* Attention Button Pressed */
-+
-+/* Interrupt Status Register */
-+#define PCIE_IR_SR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
-+#define PCIE_IR_SR_PME_CAUSE_MSI             0x00000002  /* MSI caused by PME */
-+#define PCIE_IR_SR_HP_PME_WAKE_GEN           0x00000004  /* Hotplug PME Wake Generation */
-+#define PCIE_IR_SR_HP_MSI                    0x00000008  /* Hotplug MSI */
-+#define PCIE_IR_SR_AHB_LU_ERR                0x00000030  /* AHB Bridge Lookup Error Signals */
-+#define PCIE_IR_SR_AHB_LU_ERR_S              4
-+#define PCIE_IR_SR_INT_MSG_NUM               0x00003E00  /* Interrupt Message Number */
-+#define PCIE_IR_SR_INT_MSG_NUM_S             9
-+#define PCIE_IR_SR_AER_INT_MSG_NUM           0xF8000000  /* Advanced Error Interrupt Message Number */
-+#define PCIE_IR_SR_AER_INT_MSG_NUM_S         27
-+
-+/* Message Control Register */
-+#define PCIE_MSG_CR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
-+#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG     0x00000001  /* Generate PME Turn Off Message */
-+#define PCIE_MSG_CR_GEN_UNLOCK_MSG           0x00000002  /* Generate Unlock Message */
-+
-+#define PCIE_VDM_DR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
-+
-+/* Vendor-Defined Message Requester ID Register */
-+#define PCIE_VDM_RID(X)                     (PCIE_APP_PORT_TO_BASE (X) + 0x38)
-+#define PCIE_VDM_RID_VENROR_MSG_REQ_ID       0x0000FFFF
-+#define PCIE_VDM_RID_VDMRID_S                0
-+
-+/* ASPM Control Register */
-+#define PCIE_ASPM_CR(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
-+#define PCIE_ASPM_CR_HOT_RST                 0x00000001  /* Hot Reset Request to the downstream device */
-+#define PCIE_ASPM_CR_REQ_EXIT_L1             0x00000002  /* Request to Exit L1 */
-+#define PCIE_ASPM_CR_REQ_ENTER_L1            0x00000004  /* Request to Enter L1 */
-+
-+/* Vendor Message DW0 Register */
-+#define PCIE_VM_MSG_DW0(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
-+#define PCIE_VM_MSG_DW0_TYPE                 0x0000001F  /* Message type */
-+#define PCIE_VM_MSG_DW0_TYPE_S               0
-+#define PCIE_VM_MSG_DW0_FORMAT               0x00000060  /* Format */
-+#define PCIE_VM_MSG_DW0_FORMAT_S             5
-+#define PCIE_VM_MSG_DW0_TC                   0x00007000  /* Traffic Class */
-+#define PCIE_VM_MSG_DW0_TC_S                 12
-+#define PCIE_VM_MSG_DW0_ATTR                 0x000C0000  /* Atrributes */
-+#define PCIE_VM_MSG_DW0_ATTR_S               18
-+#define PCIE_VM_MSG_DW0_EP_TLP               0x00100000  /* Poisoned TLP */
-+#define PCIE_VM_MSG_DW0_TD                   0x00200000  /* TLP Digest */
-+#define PCIE_VM_MSG_DW0_LEN                  0xFFC00000  /* Length */
-+#define PCIE_VM_MSG_DW0_LEN_S                22
-+
-+/* Format Definition */
-+enum {
-+    PCIE_VM_MSG_FORMAT_00 = 0,  /* 3DW Hdr, no data*/
-+    PCIE_VM_MSG_FORMAT_01,      /* 4DW Hdr, no data */
-+    PCIE_VM_MSG_FORMAT_10,      /* 3DW Hdr, with data */
-+    PCIE_VM_MSG_FORMAT_11,      /* 4DW Hdr, with data */
-+};
-+
-+/* Traffic Class Definition */
-+enum {
-+    PCIE_VM_MSG_TC0 = 0,
-+    PCIE_VM_MSG_TC1,
-+    PCIE_VM_MSG_TC2,
-+    PCIE_VM_MSG_TC3,
-+    PCIE_VM_MSG_TC4,
-+    PCIE_VM_MSG_TC5,
-+    PCIE_VM_MSG_TC6,
-+    PCIE_VM_MSG_TC7,
-+};
-+
-+/* Attributes Definition */
-+enum {
-+    PCIE_VM_MSG_ATTR_00 = 0,   /* RO and No Snoop cleared */
-+    PCIE_VM_MSG_ATTR_01,       /* RO cleared , No Snoop set */
-+    PCIE_VM_MSG_ATTR_10,       /* RO set, No Snoop cleared*/
-+    PCIE_VM_MSG_ATTR_11,       /* RO and No Snoop set */
-+};
-+
-+/* Payload Size Definition */
-+#define PCIE_VM_MSG_LEN_MIN  0
-+#define PCIE_VM_MSG_LEN_MAX  1024
-+
-+/* Vendor Message DW1 Register */
-+#define PCIE_VM_MSG_DW1(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
-+#define PCIE_VM_MSG_DW1_FUNC_NUM            0x00000070  /* Function Number */
-+#define PCIE_VM_MSG_DW1_FUNC_NUM_S          8
-+#define PCIE_VM_MSG_DW1_CODE                0x00FF0000  /* Message Code */
-+#define PCIE_VM_MSG_DW1_CODE_S              16
-+#define PCIE_VM_MSG_DW1_TAG                 0xFF000000  /* Tag */
-+#define PCIE_VM_MSG_DW1_TAG_S               24
-+
-+#define PCIE_VM_MSG_DW2(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
-+#define PCIE_VM_MSG_DW3(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
-+
-+/* Vendor Message Request Register */
-+#define PCIE_VM_MSG_REQR(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
-+#define PCIE_VM_MSG_REQR_REQ                 0x00000001  /* Vendor Message Request */
-+
-+
-+/* AHB Slave Side Band Control Register */
-+#define PCIE_AHB_SSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
-+#define PCIE_AHB_SSB_REQ_BCM                0x00000001 /* Slave Reques BCM filed */
-+#define PCIE_AHB_SSB_REQ_EP                 0x00000002 /* Slave Reques EP filed */
-+#define PCIE_AHB_SSB_REQ_TD                 0x00000004 /* Slave Reques TD filed */
-+#define PCIE_AHB_SSB_REQ_ATTR               0x00000018 /* Slave Reques Attribute number */
-+#define PCIE_AHB_SSB_REQ_ATTR_S             3
-+#define PCIE_AHB_SSB_REQ_TC                 0x000000E0 /* Slave Request TC Field */
-+#define PCIE_AHB_SSB_REQ_TC_S               5
-+
-+/* AHB Master SideBand Ctrl Register */
-+#define PCIE_AHB_MSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
-+#define PCIE_AHB_MSB_RESP_ATTR               0x00000003 /* Master Response Attribute number */
-+#define PCIE_AHB_MSB_RESP_ATTR_S             0
-+#define PCIE_AHB_MSB_RESP_BAD_EOT            0x00000004 /* Master Response Badeot filed */
-+#define PCIE_AHB_MSB_RESP_BCM                0x00000008 /* Master Response BCM filed */
-+#define PCIE_AHB_MSB_RESP_EP                 0x00000010 /* Master Response EP filed */
-+#define PCIE_AHB_MSB_RESP_TD                 0x00000020 /* Master Response TD filed */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM            0x000003C0 /* Master Response Function number */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM_S          6
-+
-+/* AHB Control Register, fixed bus enumeration exception */
-+#define PCIE_AHB_CTRL(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
-+#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS     0x00000001 
-+
-+/* Interrupt Enalbe Register */
-+#define PCIE_IRNEN(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
-+#define PCIE_IRNCR(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
-+#define PCIE_IRNICR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
-+
-+/* PCIe interrupt enable/control/capture register definition */
-+#define PCIE_IRN_AER_REPORT                 0x00000001  /* AER Interrupt */
-+#define PCIE_IRN_AER_MSIX                   0x00000002  /* Advanced Error MSI-X Interrupt */
-+#define PCIE_IRN_PME                        0x00000004  /* PME Interrupt */
-+#define PCIE_IRN_HOTPLUG                    0x00000008  /* Hotplug Interrupt */
-+#define PCIE_IRN_RX_VDM_MSG                 0x00000010  /* Vendor-Defined Message Interrupt */
-+#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG     0x00000020  /* Correctable Error Message Interrupt */
-+#define PCIE_IRN_RX_NON_FATAL_ERR_MSG       0x00000040  /* Non-fatal Error Message */
-+#define PCIE_IRN_RX_FATAL_ERR_MSG           0x00000080  /* Fatal Error Message */
-+#define PCIE_IRN_RX_PME_MSG                 0x00000100  /* PME Message Interrupt */
-+#define PCIE_IRN_RX_PME_TURNOFF_ACK         0x00000200  /* PME Turnoff Ack Message Interrupt */
-+#define PCIE_IRN_AHB_BR_FATAL_ERR           0x00000400  /* AHB Fatal Error Interrupt */
-+#define PCIE_IRN_LINK_AUTO_BW_STATUS        0x00000800  /* Link Auto Bandwidth Status Interrupt */
-+#define PCIE_IRN_BW_MGT                     0x00001000  /* Bandwidth Managment Interrupt */
-+#define PCIE_IRN_INTA                       0x00002000  /* INTA */
-+#define PCIE_IRN_INTB                       0x00004000  /* INTB */
-+#define PCIE_IRN_INTC                       0x00008000  /* INTC */
-+#define PCIE_IRN_INTD                       0x00010000  /* INTD */
-+#define PCIE_IRN_WAKEUP                     0x00020000  /* Wake up Interrupt */
-+
-+#define PCIE_RC_CORE_COMBINED_INT    (PCIE_IRN_AER_REPORT |  PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
-+                                      PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
-+                                      PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
-+                                      PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
-+                                      PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
-+/* PCIe RC Configuration Register */
-+#define PCIE_VDID(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
-+
-+/* Bit definition from pci_reg.h */
-+#define PCIE_PCICMDSTS(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
-+#define PCIE_CCRID(X)               (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
-+#define PCIE_CLSLTHTBR(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
-+/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
-+#define PCIE_BAR0(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
-+#define PCIE_BAR1(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
-+
-+#define PCIE_BNR(X)                 (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
-+/* Bus Number Register bits */
-+#define PCIE_BNR_PRIMARY_BUS_NUM             0x000000FF
-+#define PCIE_BNR_PRIMARY_BUS_NUM_S           0
-+#define PCIE_PNR_SECONDARY_BUS_NUM           0x0000FF00
-+#define PCIE_PNR_SECONDARY_BUS_NUM_S         8
-+#define PCIE_PNR_SUB_BUS_NUM                 0x00FF0000
-+#define PCIE_PNR_SUB_BUS_NUM_S               16
-+
-+/* IO Base/Limit Register bits */
-+#define PCIE_IOBLSECS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C)  /* RC only */
-+#define PCIE_IOBLSECS_32BIT_IO_ADDR             0x00000001
-+#define PCIE_IOBLSECS_IO_BASE_ADDR              0x000000F0
-+#define PCIE_IOBLSECS_IO_BASE_ADDR_S            4
-+#define PCIE_IOBLSECS_32BIT_IOLIMT              0x00000100
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR             0x0000F000
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S           12
-+
-+/* Non-prefetchable Memory Base/Limit Register bit */
-+#define PCIE_MBML(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20)  /* RC only */
-+#define PCIE_MBML_MEM_BASE_ADDR                 0x0000FFF0
-+#define PCIE_MBML_MEM_BASE_ADDR_S               4
-+#define PCIE_MBML_MEM_LIMIT_ADDR                0xFFF00000
-+#define PCIE_MBML_MEM_LIMIT_ADDR_S              20
-+
-+/* Prefetchable Memory Base/Limit Register bit */
-+#define PCIE_PMBL(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24)  /* RC only */
-+#define PCIE_PMBL_64BIT_ADDR                    0x00000001
-+#define PCIE_PMBL_UPPER_12BIT                   0x0000FFF0
-+#define PCIE_PMBL_UPPER_12BIT_S                 4
-+#define PCIE_PMBL_E64MA                         0x00010000
-+#define PCIE_PMBL_END_ADDR                      0xFFF00000
-+#define PCIE_PMBL_END_ADDR_S                    20
-+#define PCIE_PMBU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28)  /* RC only */
-+#define PCIE_PMLU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C)  /* RC only */
-+
-+/* I/O Base/Limit Upper 16 bits register */
-+#define PCIE_IO_BANDL(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30)  /* RC only */
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE        0x0000FFFF
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S      0
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT       0xFFFF0000
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S     16
-+
-+#define PCIE_CPR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
-+#define PCIE_EBBAR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
-+
-+/* Interrupt and Secondary Bridge Control Register */
-+#define PCIE_INTRBCTRL(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
-+
-+#define PCIE_INTRBCTRL_INT_LINE                 0x000000FF
-+#define PCIE_INTRBCTRL_INT_LINE_S               0
-+#define PCIE_INTRBCTRL_INT_PIN                  0x0000FF00
-+#define PCIE_INTRBCTRL_INT_PIN_S                8
-+#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE   0x00010000    /* #PERR */
-+#define PCIE_INTRBCTRL_SERR_ENABLE              0x00020000    /* #SERR */
-+#define PCIE_INTRBCTRL_ISA_ENABLE               0x00040000    /* ISA enable, IO 64KB only */
-+#define PCIE_INTRBCTRL_VGA_ENABLE               0x00080000    /* VGA enable */
-+#define PCIE_INTRBCTRL_VGA_16BIT_DECODE         0x00100000    /* VGA 16bit decode */
-+#define PCIE_INTRBCTRL_RST_SECONDARY_BUS        0x00400000    /* Secondary bus rest, hot rest, 1ms */
-+/* Others are read only */
-+enum {
-+    PCIE_INTRBCTRL_INT_NON = 0,
-+    PCIE_INTRBCTRL_INTA,
-+    PCIE_INTRBCTRL_INTB,
-+    PCIE_INTRBCTRL_INTC,
-+    PCIE_INTRBCTRL_INTD,
-+};
-+
-+#define PCIE_PM_CAPR(X)                  (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
-+
-+/* Power Management Control and Status Register */
-+#define PCIE_PM_CSR(X)                   (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
-+
-+#define PCIE_PM_CSR_POWER_STATE           0x00000003   /* Power State */
-+#define PCIE_PM_CSR_POWER_STATE_S         0
-+#define PCIE_PM_CSR_SW_RST                0x00000008   /* Soft Reset Enabled */
-+#define PCIE_PM_CSR_PME_ENABLE            0x00000100   /* PME Enable */
-+#define PCIE_PM_CSR_PME_STATUS            0x00008000   /* PME status */
-+
-+/* MSI Capability Register for EP */
-+#define PCIE_MCAPR(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
-+
-+#define PCIE_MCAPR_MSI_CAP_ID             0x000000FF  /* MSI Capability ID */
-+#define PCIE_MCAPR_MSI_CAP_ID_S           0
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR       0x0000FF00  /* Next Capability Pointer */
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S     8
-+#define PCIE_MCAPR_MSI_ENABLE             0x00010000  /* MSI Enable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP          0x000E0000  /* Multiple Message Capable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP_S        17
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE       0x00700000  /* Multiple Message Enable */
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE_S     20
-+#define PCIE_MCAPR_ADDR64_CAP             0X00800000  /* 64-bit Address Capable */
-+
-+/* MSI Message Address Register */
-+#define PCIE_MA(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
-+
-+#define PCIE_MA_ADDR_MASK                 0xFFFFFFFC  /* Message Address */
-+
-+/* MSI Message Upper Address Register */
-+#define PCIE_MUA(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
-+
-+/* MSI Message Data Register */
-+#define PCIE_MD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
-+
-+#define PCIE_MD_DATA                      0x0000FFFF  /* Message Data */
-+#define PCIE_MD_DATA_S                    0
-+
-+/* PCI Express Capability Register */
-+#define PCIE_XCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
-+
-+#define PCIE_XCAP_ID                      0x000000FF  /* PCI Express Capability ID */
-+#define PCIE_XCAP_ID_S                    0
-+#define PCIE_XCAP_NEXT_CAP                0x0000FF00  /* Next Capability Pointer */
-+#define PCIE_XCAP_NEXT_CAP_S              8
-+#define PCIE_XCAP_VER                     0x000F0000  /* PCI Express Capability Version */
-+#define PCIE_XCAP_VER_S                   16
-+#define PCIE_XCAP_DEV_PORT_TYPE           0x00F00000  /* Device Port Type */
-+#define PCIE_XCAP_DEV_PORT_TYPE_S         20
-+#define PCIE_XCAP_SLOT_IMPLEMENTED        0x01000000  /* Slot Implemented */
-+#define PCIE_XCAP_MSG_INT_NUM             0x3E000000  /* Interrupt Message Number */
-+#define PCIE_XCAP_MSG_INT_NUM_S           25
-+
-+/* Device Capability Register */
-+#define PCIE_DCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
-+
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE        0x00000007   /* Max Payload size */
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S      0
-+#define PCIE_DCAP_PHANTOM_FUNC            0x00000018   /* Phanton Function, not supported */
-+#define PCIE_DCAP_PHANTOM_FUNC_S          3
-+#define PCIE_DCAP_EXT_TAG                 0x00000020   /* Extended Tag Field */
-+#define PCIE_DCAP_EP_L0S_LATENCY          0x000001C0   /* EP L0s latency only */
-+#define PCIE_DCAP_EP_L0S_LATENCY_S        6
-+#define PCIE_DCAP_EP_L1_LATENCY           0x00000E00   /* EP L1 latency only */
-+#define PCIE_DCAP_EP_L1_LATENCY_S         9
-+#define PCIE_DCAP_ROLE_BASE_ERR_REPORT    0x00008000   /* Role Based ERR */
-+
-+/* Maximum payload size supported */
-+enum {
-+    PCIE_MAX_PAYLOAD_128 = 0,
-+    PCIE_MAX_PAYLOAD_256,
-+    PCIE_MAX_PAYLOAD_512,
-+    PCIE_MAX_PAYLOAD_1024,
-+    PCIE_MAX_PAYLOAD_2048,
-+    PCIE_MAX_PAYLOAD_4096,
-+};
-+
-+/* Device Control and Status Register */
-+#define PCIE_DCTLSTS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
-+
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN        0x00000001   /* COR-ERR */
-+#define PCIE_DCTLSTS_NONFATAL_ERR_EN           0x00000002   /* Non-fatal ERR */
-+#define PCIE_DCTLSTS_FATAL_ERR_EN              0x00000004   /* Fatal ERR */
-+#define PCIE_DCTLSYS_UR_REQ_EN                 0x00000008   /* UR ERR */
-+#define PCIE_DCTLSTS_RELAXED_ORDERING_EN       0x00000010   /* Enable relaxing ordering */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE          0x000000E0   /* Max payload mask */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S        5
-+#define PCIE_DCTLSTS_EXT_TAG_EN                0x00000100   /* Extended tag field */
-+#define PCIE_DCTLSTS_PHANTOM_FUNC_EN           0x00000200   /* Phantom Function Enable */
-+#define PCIE_DCTLSTS_AUX_PM_EN                 0x00000400   /* AUX Power PM Enable */
-+#define PCIE_DCTLSTS_NO_SNOOP_EN               0x00000800   /* Enable no snoop, except root port*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE             0x00007000   /* Max Read Request size*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE_S           12
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR           0x00010000   /* COR-ERR Detected */
-+#define PCIE_DCTLSTS_NONFATAL_ERR              0x00020000   /* Non-Fatal ERR Detected */
-+#define PCIE_DCTLSTS_FATAL_ER                  0x00040000   /* Fatal ERR Detected */
-+#define PCIE_DCTLSTS_UNSUPPORTED_REQ           0x00080000   /* UR Detected */
-+#define PCIE_DCTLSTS_AUX_POWER                 0x00100000   /* Aux Power Detected */
-+#define PCIE_DCTLSTS_TRANSACT_PENDING          0x00200000   /* Transaction pending */
-+
-+#define PCIE_DCTLSTS_ERR_EN      (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
-+                                  PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
-+                                  PCIE_DCTLSYS_UR_REQ_EN)
-+
-+/* Link Capability Register */
-+#define PCIE_LCAP(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
-+#define PCIE_LCAP_MAX_LINK_SPEED               0x0000000F  /* Max link speed, 0x1 by default */
-+#define PCIE_LCAP_MAX_LINK_SPEED_S             0
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH             0x000003F0  /* Maxium Length Width */
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH_S           4
-+#define PCIE_LCAP_ASPM_LEVEL                   0x00000C00  /* Active State Link PM Support */
-+#define PCIE_LCAP_ASPM_LEVEL_S                 10
-+#define PCIE_LCAP_L0S_EIXT_LATENCY             0x00007000  /* L0s Exit Latency */
-+#define PCIE_LCAP_L0S_EIXT_LATENCY_S           12
-+#define PCIE_LCAP_L1_EXIT_LATENCY              0x00038000  /* L1 Exit Latency */
-+#define PCIE_LCAP_L1_EXIT_LATENCY_S            15
-+#define PCIE_LCAP_CLK_PM                       0x00040000  /* Clock Power Management */
-+#define PCIE_LCAP_SDER                         0x00080000  /* Surprise Down Error Reporting */
-+#define PCIE_LCAP_DLL_ACTIVE_REPROT            0x00100000  /* Data Link Layer Active Reporting Capable */
-+#define PCIE_LCAP_PORT_NUM                     0xFF0000000  /* Port number */
-+#define PCIE_LCAP_PORT_NUM_S                   24
-+
-+/* Maximum Length width definition */
-+#define PCIE_MAX_LENGTH_WIDTH_RES  0x00
-+#define PCIE_MAX_LENGTH_WIDTH_X1   0x01  /* Default */
-+#define PCIE_MAX_LENGTH_WIDTH_X2   0x02
-+#define PCIE_MAX_LENGTH_WIDTH_X4   0x04
-+#define PCIE_MAX_LENGTH_WIDTH_X8   0x08
-+#define PCIE_MAX_LENGTH_WIDTH_X12  0x0C
-+#define PCIE_MAX_LENGTH_WIDTH_X16  0x10
-+#define PCIE_MAX_LENGTH_WIDTH_X32  0x20
-+
-+/* Active State Link PM definition */
-+enum {
-+    PCIE_ASPM_RES0                = 0,
-+    PCIE_ASPM_L0S_ENTRY_SUPPORT,        /* L0s */
-+    PCIE_ASPM_RES1,
-+    PCIE_ASPM_L0S_L1_ENTRY_SUPPORT,     /* L0s and L1, default */
-+};
-+
-+/* L0s Exit Latency definition */
-+enum {
-+    PCIE_L0S_EIXT_LATENCY_L64NS    = 0, /* < 64 ns */
-+    PCIE_L0S_EIXT_LATENCY_B64A128,      /* > 64 ns < 128 ns */
-+    PCIE_L0S_EIXT_LATENCY_B128A256,     /* > 128 ns < 256 ns */
-+    PCIE_L0S_EIXT_LATENCY_B256A512,     /* > 256 ns < 512 ns */
-+    PCIE_L0S_EIXT_LATENCY_B512TO1U,     /* > 512 ns < 1 us */
-+    PCIE_L0S_EIXT_LATENCY_B1A2U,        /* > 1 us < 2 us */
-+    PCIE_L0S_EIXT_LATENCY_B2A4U,        /* > 2 us < 4 us */
-+    PCIE_L0S_EIXT_LATENCY_M4US,         /* > 4 us  */
-+};
-+
-+/* L1 Exit Latency definition */
-+enum {
-+    PCIE_L1_EXIT_LATENCY_L1US  = 0,  /* < 1 us */
-+    PCIE_L1_EXIT_LATENCY_B1A2,       /* > 1 us < 2 us */
-+    PCIE_L1_EXIT_LATENCY_B2A4,       /* > 2 us < 4 us */
-+    PCIE_L1_EXIT_LATENCY_B4A8,       /* > 4 us < 8 us */
-+    PCIE_L1_EXIT_LATENCY_B8A16,      /* > 8 us < 16 us */
-+    PCIE_L1_EXIT_LATENCY_B16A32,     /* > 16 us < 32 us */
-+    PCIE_L1_EXIT_LATENCY_B32A64,     /* > 32 us < 64 us */
-+    PCIE_L1_EXIT_LATENCY_M64US,      /* > 64 us */
-+};
-+
-+/* Link Control and Status Register */
-+#define PCIE_LCTLSTS(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
-+#define PCIE_LCTLSTS_ASPM_ENABLE            0x00000003  /* Active State Link PM Control */
-+#define PCIE_LCTLSTS_ASPM_ENABLE_S          0
-+#define PCIE_LCTLSTS_RCB128                 0x00000008  /* Read Completion Boundary 128*/
-+#define PCIE_LCTLSTS_LINK_DISABLE           0x00000010  /* Link Disable */
-+#define PCIE_LCTLSTS_RETRIAN_LINK           0x00000020  /* Retrain Link */
-+#define PCIE_LCTLSTS_COM_CLK_CFG            0x00000040  /* Common Clock Configuration */
-+#define PCIE_LCTLSTS_EXT_SYNC               0x00000080  /* Extended Synch */
-+#define PCIE_LCTLSTS_CLK_PM_EN              0x00000100  /* Enable Clock Powerm Management */
-+#define PCIE_LCTLSTS_LINK_SPEED             0x000F0000  /* Link Speed */
-+#define PCIE_LCTLSTS_LINK_SPEED_S           16
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH  0x03F00000  /* Negotiated Link Width */
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
-+#define PCIE_LCTLSTS_RETRAIN_PENDING        0x08000000  /* Link training is ongoing */
-+#define PCIE_LCTLSTS_SLOT_CLK_CFG           0x10000000  /* Slot Clock Configuration */
-+#define PCIE_LCTLSTS_DLL_ACTIVE             0x20000000  /* Data Link Layer Active */
-+
-+/* Slot Capabilities Register */
-+#define PCIE_SLCAP(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
-+
-+/* Slot Capabilities */
-+#define PCIE_SLCTLSTS(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
-+
-+/* Root Control and Capability Register */
-+#define PCIE_RCTLCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
-+#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR  0x00000001   /* #SERR on COR-ERR */
-+#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR     0x00000002   /* #SERR on Non-Fatal ERR */
-+#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR        0x00000004   /* #SERR on Fatal ERR */
-+#define PCIE_RCTLCAP_PME_INT_EN               0x00000008   /* PME Interrupt Enable */
-+#define PCIE_RCTLCAP_SERR_ENABLE    (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
-+                                     PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
-+/* Root Status Register */
-+#define PCIE_RSTS(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
-+#define PCIE_RSTS_PME_REQ_ID                   0x0000FFFF   /* PME Request ID */
-+#define PCIE_RSTS_PME_REQ_ID_S                 0
-+#define PCIE_RSTS_PME_STATUS                   0x00010000   /* PME Status */
-+#define PCIE_RSTS_PME_PENDING                  0x00020000   /* PME Pending */
-+
-+/* PCI Express Enhanced Capability Header */
-+#define PCIE_ENHANCED_CAP(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
-+#define PCIE_ENHANCED_CAP_ID                 0x0000FFFF  /* PCI Express Extended Capability ID */
-+#define PCIE_ENHANCED_CAP_ID_S               0
-+#define PCIE_ENHANCED_CAP_VER                0x000F0000  /* Capability Version */
-+#define PCIE_ENHANCED_CAP_VER_S              16
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET        0xFFF00000  /* Next Capability Offset */
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S      20
-+
-+/* Uncorrectable Error Status Register */
-+#define PCIE_UES_R(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
-+#define PCIE_DATA_LINK_PROTOCOL_ERR          0x00000010  /* Data Link Protocol Error Status */
-+#define PCIE_SURPRISE_DOWN_ERROR             0x00000020  /* Surprise Down Error Status */
-+#define PCIE_POISONED_TLP                    0x00001000  /* Poisoned TLP Status */
-+#define PCIE_FC_PROTOCOL_ERR                 0x00002000  /* Flow Control Protocol Error Status */
-+#define PCIE_COMPLETION_TIMEOUT              0x00004000  /* Completion Timeout Status */
-+#define PCIE_COMPLETOR_ABORT                 0x00008000  /* Completer Abort Error */
-+#define PCIE_UNEXPECTED_COMPLETION           0x00010000  /* Unexpected Completion Status */
-+#define PCIE_RECEIVER_OVERFLOW               0x00020000  /* Receive Overflow Status */
-+#define PCIE_MALFORNED_TLP                   0x00040000  /* Malformed TLP Stauts */
-+#define PCIE_ECRC_ERR                        0x00080000  /* ECRC Error Stauts */
-+#define PCIE_UR_REQ                          0x00100000  /* Unsupported Request Error Status */
-+#define PCIE_ALL_UNCORRECTABLE_ERR    (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
-+                         PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT |   \
-+                         PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
-+                         PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
-+
-+/* Uncorrectable Error Mask Register, Mask means no report */
-+#define PCIE_UEMR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
-+
-+/* Uncorrectable Error Severity Register */
-+#define PCIE_UESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
-+
-+/* Correctable Error Status Register */
-+#define PCIE_CESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
-+#define PCIE_RX_ERR                          0x00000001  /* Receive Error Status */
-+#define PCIE_BAD_TLP                         0x00000040  /* Bad TLP Status */
-+#define PCIE_BAD_DLLP                        0x00000080  /* Bad DLLP Status */
-+#define PCIE_REPLAY_NUM_ROLLOVER             0x00000100  /* Replay Number Rollover Status */
-+#define PCIE_REPLAY_TIMER_TIMEOUT_ERR        0x00001000  /* Reply Timer Timeout Status */
-+#define PCIE_ADVISORY_NONFTAL_ERR            0x00002000  /* Advisory Non-Fatal Error Status */
-+#define PCIE_CORRECTABLE_ERR        (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
-+                                     PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
-+
-+/* Correctable Error Mask Register */
-+#define PCIE_CEMR(X)                        (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
-+
-+/* Advanced Error Capabilities and Control Register */
-+#define PCIE_AECCR(X)                       (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
-+#define PCIE_AECCR_FIRST_ERR_PTR            0x0000001F  /* First Error Pointer */
-+#define PCIE_AECCR_FIRST_ERR_PTR_S          0
-+#define PCIE_AECCR_ECRC_GEN_CAP             0x00000020  /* ECRC Generation Capable */
-+#define PCIE_AECCR_ECRC_GEN_EN              0x00000040  /* ECRC Generation Enable */
-+#define PCIE_AECCR_ECRC_CHECK_CAP           0x00000080  /* ECRC Check Capable */
-+#define PCIE_AECCR_ECRC_CHECK_EN            0x00000100  /* ECRC Check Enable */
-+
-+/* Header Log Register 1 */
-+#define PCIE_HLR1(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
-+
-+/* Header Log Register 2 */
-+#define PCIE_HLR2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
-+
-+/* Header Log Register 3 */
-+#define PCIE_HLR3(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
-+
-+/* Header Log Register 4 */
-+#define PCIE_HLR4(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
-+
-+/* Root Error Command Register */
-+#define PCIE_RECR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
-+#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN  0x00000001 /* COR-ERR */
-+#define PCIE_RECR_NONFATAL_ERR_REPORT_EN     0x00000002 /* Non-Fatal ERR */
-+#define PCIE_RECR_FATAL_ERR_REPORT_EN        0x00000004 /* Fatal ERR */
-+#define PCIE_RECR_ERR_REPORT_EN  (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
-+                PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
-+
-+/* Root Error Status Register */
-+#define PCIE_RESR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
-+#define PCIE_RESR_CORRECTABLE_ERR                0x00000001   /* COR-ERR Receveid */
-+#define PCIE_RESR_MULTI_CORRECTABLE_ERR          0x00000002   /* Multiple COR-ERR Received */
-+#define PCIE_RESR_FATAL_NOFATAL_ERR              0x00000004   /* ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR        0x00000008   /* Multiple ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR  0x00000010   /* First UN-COR Fatal */
-+#define PCIR_RESR_NON_FATAL_ERR                  0x00000020   /* Non-Fatal Error Message Received */
-+#define PCIE_RESR_FATAL_ERR                      0x00000040   /* Fatal Message Received */
-+#define PCIE_RESR_AER_INT_MSG_NUM                0xF8000000   /* Advanced Error Interrupt Message Number */
-+#define PCIE_RESR_AER_INT_MSG_NUM_S              27
-+
-+/* Error Source Indentification Register */
-+#define PCIE_ESIR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID         0x0000FFFF
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S       0
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID         0xFFFF0000
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S       16
-+
-+/* VC Enhanced Capability Header */
-+#define PCIE_VC_ECH(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
-+
-+/* Port VC Capability Register */
-+#define PCIE_PVC1(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
-+#define PCIE_PVC1_EXT_VC_CNT                    0x00000007  /* Extended VC Count */
-+#define PCIE_PVC1_EXT_VC_CNT_S                  0
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT            0x00000070  /* Low Priority Extended VC Count */
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S          4
-+#define PCIE_PVC1_REF_CLK                       0x00000300  /* Reference Clock */
-+#define PCIE_PVC1_REF_CLK_S                     8
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE       0x00000C00  /* Port Arbitration Table Entry Size */
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S     10
-+
-+/* Extended Virtual Channel Count Defintion */
-+#define PCIE_EXT_VC_CNT_MIN   0
-+#define PCIE_EXT_VC_CNT_MAX   7
-+
-+/* Port Arbitration Table Entry Size Definition */
-+enum {
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
-+};
-+
-+/* Port VC Capability Register 2 */
-+#define PCIE_PVC2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
-+#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR      0x00000001  /* HW Fixed arbitration, 16 phase WRR */
-+#define PCIE_PVC2_VC_ARB_32P_WRR            0x00000002  /* 32 phase WRR */
-+#define PCIE_PVC2_VC_ARB_64P_WRR            0x00000004  /* 64 phase WRR */
-+#define PCIE_PVC2_VC_ARB_128P_WRR           0x00000008  /* 128 phase WRR */
-+#define PCIE_PVC2_VC_ARB_WRR                0x0000000F
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET         0xFF000000  /* VC arbitration table offset, not support */
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S       24
-+
-+/* Port VC Control and Status Register */     
-+#define PCIE_PVCCRSR(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
-+#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB         0x00000001  /* Load VC Arbitration Table */
-+#define PCIE_PVCCRSR_VC_ARB_SEL              0x0000000E  /* VC Arbitration Select */
-+#define PCIE_PVCCRSR_VC_ARB_SEL_S            1
-+#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS       0x00010000  /* Arbitration Status */
-+
-+/* VC0 Resource Capability Register */
-+#define PCIE_VC0_RC(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
-+#define PCIE_VC0_RC_PORT_ARB_HW_FIXED        0x00000001  /* HW Fixed arbitration */
-+#define PCIE_VC0_RC_PORT_ARB_32P_WRR         0x00000002  /* 32 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_64P_WRR         0x00000004  /* 64 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_128P_WRR        0x00000008  /* 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR     0x00000010  /* Time-based 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR     0x00000020  /* Time-based 256 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB          (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
-+                        PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
-+                        PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
-+
-+#define PCIE_VC0_RC_REJECT_SNOOP             0x00008000  /* Reject Snoop Transactioin */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS            0x007F0000  /* Maximum time Slots */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS_S          16
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET      0xFF000000  /* Port Arbitration Table Offset */
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S    24
-+
-+/* VC0 Resource Control Register */
-+#define PCIE_VC0_RC0(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
-+#define PCIE_VC0_RC0_TVM0                    0x00000001  /* TC0 and VC0 */
-+#define PCIE_VC0_RC0_TVM1                    0x00000002  /* TC1 and VC1 */
-+#define PCIE_VC0_RC0_TVM2                    0x00000004  /* TC2 and VC2 */
-+#define PCIE_VC0_RC0_TVM3                    0x00000008  /* TC3 and VC3 */
-+#define PCIE_VC0_RC0_TVM4                    0x00000010  /* TC4 and VC4 */
-+#define PCIE_VC0_RC0_TVM5                    0x00000020  /* TC5 and VC5 */
-+#define PCIE_VC0_RC0_TVM6                    0x00000040  /* TC6 and VC6 */
-+#define PCIE_VC0_RC0_TVM7                    0x00000080  /* TC7 and VC7 */
-+#define PCIE_VC0_RC0_TC_VC                   0x000000FF  /* TC/VC mask */
-+
-+#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB       0x00010000  /* Load Port Arbitration Table */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL            0x000E0000  /* Port Arbitration Select */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL_S          17
-+#define PCIE_VC0_RC0_VC_ID                   0x07000000  /* VC ID */
-+#define PCIE_VC0_RC0_VC_ID_S                 24
-+#define PCIE_VC0_RC0_VC_EN                   0x80000000  /* VC Enable */
-+
-+/* VC0 Resource Status Register */
-+#define PCIE_VC0_RSR0(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
-+#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS    0x00010000  /* Port Arbitration Table Status,not used */
-+#define PCIE_VC0_RSR0_VC_NEG_PENDING         0x00020000  /* VC Negotiation Pending */
-+
-+/* Ack Latency Timer and Replay Timer Register */
-+#define PCIE_ALTRT(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT   0x0000FFFF  /* Round Trip Latency Time Limit */
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT          0xFFFF0000  /* Replay Time Limit */
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S        16
-+
-+/* Other Message Register */
-+#define PCIE_OMR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
-+
-+/* Port Force Link Register */
-+#define PCIE_PFLR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
-+#define PCIE_PFLR_LINK_NUM                   0x000000FF  /* Link Number */
-+#define PCIE_PFLR_LINK_NUM_S                 0
-+#define PCIE_PFLR_FORCE_LINK                 0x00008000  /* Force link */
-+#define PCIE_PFLR_LINK_STATE                 0x003F0000  /* Link State */
-+#define PCIE_PFLR_LINK_STATE_S               16
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT        0xFF000000  /* Low Power Entrance Count, only for EP */
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S      24
-+
-+/* Ack Frequency Register */
-+#define PCIE_AFR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
-+#define PCIE_AFR_AF                          0x000000FF  /* Ack Frequency */
-+#define PCIE_AFR_AF_S                        0
-+#define PCIE_AFR_FTS_NUM                     0x0000FF00  /* The number of Fast Training Sequence from L0S to L0 */
-+#define PCIE_AFR_FTS_NUM_S                   8
-+#define PCIE_AFR_COM_FTS_NUM                 0x00FF0000  /* N_FTS; when common clock is used*/
-+#define PCIE_AFR_COM_FTS_NUM_S               16
-+#define PCIE_AFR_L0S_ENTRY_LATENCY           0x07000000  /* L0s Entrance Latency */
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_S         24
-+#define PCIE_AFR_L1_ENTRY_LATENCY            0x38000000  /* L1 Entrance Latency */
-+#define PCIE_AFR_L1_ENTRY_LATENCY_S          27
-+#define PCIE_AFR_FTS_NUM_DEFAULT             32
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT   7
-+#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT    5
-+
-+/* Port Link Control Register */
-+#define PCIE_PLCR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
-+#define PCIE_PLCR_OTHER_MSG_REQ              0x00000001  /* Other Message Request */
-+#define PCIE_PLCR_SCRAMBLE_DISABLE           0x00000002  /* Scramble Disable */  
-+#define PCIE_PLCR_LOOPBACK_EN                0x00000004  /* Loopback Enable */
-+#define PCIE_PLCR_LTSSM_HOT_RST              0x00000008  /* Force LTSSM to the hot reset */
-+#define PCIE_PLCR_DLL_LINK_EN                0x00000020  /* Enable Link initialization */
-+#define PCIE_PLCR_FAST_LINK_SIM_EN           0x00000080  /* Sets all internal timers to fast mode for simulation purposes */
-+#define PCIE_PLCR_LINK_MODE                  0x003F0000  /* Link Mode Enable Mask */
-+#define PCIE_PLCR_LINK_MODE_S                16
-+#define PCIE_PLCR_CORRUPTED_CRC_EN           0x02000000  /* Enabled Corrupt CRC */
-+
-+/* Lane Skew Register */
-+#define PCIE_LSR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
-+#define PCIE_LSR_LANE_SKEW_NUM               0x00FFFFFF  /* Insert Lane Skew for Transmit, not applicable */
-+#define PCIE_LSR_LANE_SKEW_NUM_S             0
-+#define PCIE_LSR_FC_DISABLE                  0x01000000  /* Disable of Flow Control */
-+#define PCIE_LSR_ACKNAK_DISABLE              0x02000000  /* Disable of Ack/Nak */
-+#define PCIE_LSR_LANE_DESKEW_DISABLE         0x80000000  /* Disable of Lane-to-Lane Skew */
-+
-+/* Symbol Number Register */
-+#define PCIE_SNR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
-+#define PCIE_SNR_TS                          0x0000000F  /* Number of TS Symbol */
-+#define PCIE_SNR_TS_S                        0
-+#define PCIE_SNR_SKP                         0x00000700  /* Number of SKP Symbol */
-+#define PCIE_SNR_SKP_S                       8
-+#define PCIE_SNR_REPLAY_TIMER                0x0007C000  /* Timer Modifier for Replay Timer */
-+#define PCIE_SNR_REPLAY_TIMER_S              14
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER        0x00F80000  /* Timer Modifier for Ack/Nak Latency Timer */
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S      19
-+#define PCIE_SNR_FC_TIMER                    0x1F000000  /* Timer Modifier for Flow Control Watchdog Timer */
-+#define PCIE_SNR_FC_TIMER_S                  28
-+
-+/* Symbol Timer Register and Filter Mask Register 1 */
-+#define PCIE_STRFMR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
-+#define PCIE_STRFMR_SKP_INTERVAL            0x000007FF  /* SKP lnterval Value */
-+#define PCIE_STRFMR_SKP_INTERVAL_S          0
-+#define PCIE_STRFMR_FC_WDT_DISABLE          0x00008000  /* Disable of FC Watchdog Timer */
-+#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK    0x00010000  /* Mask Function Mismatch Filtering for Incoming Requests */
-+#define PCIE_STRFMR_POISONED_TLP_OK         0x00020000  /* Mask Poisoned TLP Filtering */
-+#define PCIE_STRFMR_BAR_MATCH_OK            0x00040000  /* Mask BAR Match Filtering */
-+#define PCIE_STRFMR_TYPE1_CFG_REQ_OK        0x00080000  /* Mask Type 1 Configuration Request Filtering */
-+#define PCIE_STRFMR_LOCKED_REQ_OK           0x00100000  /* Mask Locked Request Filtering */
-+#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK    0x00200000  /* Mask Tag Error Rules for Received Completions */
-+#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000  /* Mask Requester ID Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK         0x00800000  /* Mask Function Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_TC_MISMATCH_OK           0x01000000  /* Mask Traffic Class Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK         0x02000000  /* Mask Attribute Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK       0x04000000  /* Mask Length Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_TLP_ECRC_ERR_OK              0x08000000  /* Mask ECRC Error Filtering */
-+#define PCIE_STRFMR_CPL_TLP_ECRC_OK              0x10000000  /* Mask ECRC Error Filtering for Completions */
-+#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP           0x20000000  /* Send Message TLPs */
-+#define PCIE_STRFMR_RX_IO_TRANS_ENABLE           0x40000000  /* Mask Filtering of received I/O Requests */
-+#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE          0x80000000  /* Mask Filtering of Received Configuration Requests */
-+
-+#define PCIE_DEF_SKP_INTERVAL    700             /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
-+
-+/* Filter Masker Register 2 */
-+#define PCIE_FMR2(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
-+#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1    0x00000001  /* Mask RADM Filtering and Error Handling Rules */
-+#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1    0x00000002  /* Mask RADM Filtering and Error Handling Rules */
-+
-+/* Debug Register 0 */
-+#define PCIE_DBR0(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
-+
-+/* Debug Register 1 */
-+#define PCIE_DBR1(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
-+
-+/* Transmit Posted FC Credit Status Register */
-+#define PCIE_TPFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS           0x00000FFF /* Transmit Posted Data FC Credits */
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S         0
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS            0x000FF000 /* Transmit Posted Header FC Credits */
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S          12
-+
-+/* Transmit Non-Posted FC Credit Status */
-+#define PCIE_TNPFCS(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS         0x00000FFF /* Transmit Non-Posted Data FC Credits */
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S       0
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS          0x000FF000 /* Transmit Non-Posted Header FC Credits */
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S        12
-+
-+/* Transmit Complete FC Credit Status Register */
-+#define PCIE_TCFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS         0x00000FFF /* Transmit Completion Data FC Credits */
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S       0
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS          0x000FF000 /* Transmit Completion Header FC Credits */
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S        12
-+
-+/* Queue Status Register */
-+#define PCIE_QSR(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
-+#define PCIE_QSR_WAIT_UPDATE_FC_DLL               0x00000001 /* Received TLP FC Credits Not Returned */
-+#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY           0x00000002 /* Transmit Retry Buffer Not Empty */
-+#define PCIE_QSR_RX_QUEUE_NOT_EMPTY               0x00000004 /* Received Queue Not Empty */
-+
-+/* VC Transmit Arbitration Register 1 */
-+#define PCIE_VCTAR1(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC0               0x000000FF /* WRR Weight for VC0 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC1               0x0000FF00 /* WRR Weight for VC1 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC2               0x00FF0000 /* WRR Weight for VC2 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC3               0xFF000000 /* WRR Weight for VC3 */
-+
-+/* VC Transmit Arbitration Register 2 */
-+#define PCIE_VCTAR2(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC4               0x000000FF /* WRR Weight for VC4 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC5               0x0000FF00 /* WRR Weight for VC5 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC6               0x00FF0000 /* WRR Weight for VC6 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC7               0xFF000000 /* WRR Weight for VC7 */
-+
-+/* VC0 Posted Receive Queue Control Register */
-+#define PCIE_VC0_PRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS            0x00000FFF /* VC0 Posted Data Credits */
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S          0
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS             0x000FF000 /* VC0 Posted Header Credits */
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S           12
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE          0x00E00000 /* VC0 Posted TLP Queue Mode */
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S        20
-+#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER           0x40000000 /* TLP Type Ordering for VC0 */    
-+#define PCIE_VC0_PRQCR_VC_STRICT_ORDER           0x80000000 /* VC0 Ordering for Receive Queues */
-+
-+/* VC0 Non-Posted Receive Queue Control */
-+#define PCIE_VC0_NPRQCR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS          0x00000FFF /* VC0 Non-Posted Data Credits */
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S        0
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS           0x000FF000 /* VC0 Non-Posted Header Credits */
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S         12
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE        0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S      20
-+
-+/* VC0 Completion Receive Queue Control */
-+#define PCIE_VC0_CRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS          0x00000FFF /* VC0 Completion TLP Queue Mode */
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S        0
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS           0x000FF000 /* VC0 Completion Header Credits */
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S         12
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE        0x00E00000 /* VC0 Completion Data Credits */
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S      21
-+
-+/* Applicable to the above three registers */
-+enum {
-+    PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
-+    PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH   = 2,
-+    PCIE_VC0_TLP_QUEUE_MODE_BYPASS        = 4,
-+};
-+
-+/* VC0 Posted Buffer Depth Register */
-+#define PCIE_VC0_PBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES       0x00003FFF /* VC0 Posted Data Queue Depth */
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S     0
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES        0x03FF0000 /* VC0 Posted Header Queue Depth */
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S      16
-+
-+/* VC0 Non-Posted Buffer Depth Register */
-+#define PCIE_VC0_NPBD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES     0x00003FFF /* VC0 Non-Posted Data Queue Depth */
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S   0
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S    16
-+
-+/* VC0 Completion Buffer Depth Register */
-+#define PCIE_VC0_CBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES     0x00003FFF /* C0 Completion Data Queue Depth */
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S   0
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Completion Header Queue Depth */
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S    16
-+
-+/* PHY Status Register, all zeros in VR9 */
-+#define PCIE_PHYSR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
-+
-+/* PHY Control Register, all zeros in VR9 */
-+#define PCIE_PHYCR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
-+
-+/* 
-+ * PCIe PDI PHY register definition, suppose all the following 
-+ * stuff is confidential. 
-+ * XXX, detailed bit definition
-+ */
-+#define	PCIE_PHY_PLL_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
-+#define	PCIE_PHY_PLL_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
-+#define	PCIE_PHY_PLL_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
-+#define	PCIE_PHY_PLL_CTRL4(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
-+#define	PCIE_PHY_PLL_CTRL5(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
-+#define	PCIE_PHY_PLL_CTRL6(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
-+#define	PCIE_PHY_PLL_CTRL7(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
-+#define	PCIE_PHY_PLL_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
-+#define	PCIE_PHY_PLL_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
-+#define	PCIE_PHY_PLL_A_CTRL3(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
-+#define	PCIE_PHY_PLL_STATUS(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
-+ 
-+#define PCIE_PHY_TX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
-+#define PCIE_PHY_TX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
-+#define PCIE_PHY_TX1_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
-+#define PCIE_PHY_TX1_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
-+#define PCIE_PHY_TX1_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
-+#define PCIE_PHY_TX1_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
-+#define PCIE_PHY_TX1_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
-+#define PCIE_PHY_TX1_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
-+
-+#define PCIE_PHY_TX2_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
-+#define PCIE_PHY_TX2_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
-+#define PCIE_PHY_TX2_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
-+#define PCIE_PHY_TX2_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
-+#define PCIE_PHY_TX2_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
-+#define PCIE_PHY_TX2_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
-+#define PCIE_PHY_TX2_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
-+
-+#define PCIE_PHY_RX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
-+#define PCIE_PHY_RX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
-+#define PCIE_PHY_RX1_CDR(X)         (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
-+#define PCIE_PHY_RX1_EI(X)          (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
-+#define PCIE_PHY_RX1_A_CTRL(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
-+
-+/* Interrupt related stuff */
-+#define PCIE_LEGACY_DISABLE 0
-+#define PCIE_LEGACY_INTA  1
-+#define PCIE_LEGACY_INTB  2
-+#define PCIE_LEGACY_INTC  3
-+#define PCIE_LEGACY_INTD  4
-+#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
-+
-+#define PCIE_IRQ_LOCK(lock) do {             \
-+    unsigned long flags;                     \
-+    spin_lock_irqsave(&(lock), flags);
-+#define PCIE_IRQ_UNLOCK(lock)                \
-+    spin_unlock_irqrestore(&(lock), flags);  \
-+} while (0)
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
-+#define IRQF_SHARED SA_SHIRQ
-+#endif
-+
-+#define PCIE_MSG_MSI        0x00000001
-+#define PCIE_MSG_ISR        0x00000002
-+#define PCIE_MSG_FIXUP      0x00000004
-+#define PCIE_MSG_READ_CFG   0x00000008
-+#define PCIE_MSG_WRITE_CFG  0x00000010
-+#define PCIE_MSG_CFG        (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
-+#define PCIE_MSG_REG        0x00000020
-+#define PCIE_MSG_INIT       0x00000040
-+#define PCIE_MSG_ERR        0x00000080
-+#define PCIE_MSG_PHY        0x00000100
-+#define PCIE_MSG_ANY        0x000001ff
-+
-+#define IFX_PCIE_PORT0      0
-+#define IFX_PCIE_PORT1      1
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+#define IFX_PCIE_CORE_NR    2
-+#else
-+#define IFX_PCIE_CORE_NR    1
-+#endif
-+
-+//#define IFX_PCIE_ERROR_INT
-+
-+//#define IFX_PCIE_DBG
-+
-+#if defined(IFX_PCIE_DBG)
-+#define IFX_PCIE_PRINT(_m, _fmt, args...) do {   \
-+    if (g_pcie_debug_flag & (_m)) {              \
-+        ifx_pcie_debug((_fmt), ##args);          \
-+    }                                            \
-+} while (0)
-+
-+#define INLINE 
-+#else
-+#define IFX_PCIE_PRINT(_m, _fmt, args...)   \
-+    do {} while(0)
-+#define INLINE inline
-+#endif
-+
-+struct ifx_pci_controller {
-+	struct pci_controller   pcic;
-+    
-+	/* RC specific, per host bus information */
-+	u32   port;  /* Port index, 0 -- 1st core, 1 -- 2nd core */
-+};
-+
-+typedef struct ifx_pcie_ir_irq {
-+    const unsigned int irq;
-+    const char name[16];
-+}ifx_pcie_ir_irq_t;
-+
-+typedef struct ifx_pcie_legacy_irq{
-+    const u32 irq_bit;
-+    const int irq;
-+}ifx_pcie_legacy_irq_t;
-+
-+typedef struct ifx_pcie_irq {
-+    ifx_pcie_ir_irq_t ir_irq;
-+    ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
-+}ifx_pcie_irq_t;
-+
-+extern u32 g_pcie_debug_flag;
-+extern void ifx_pcie_debug(const char *fmt, ...);
-+extern void pcie_phy_clock_mode_setup(int pcie_port);
-+extern void pcie_msi_pic_init(int pcie_port);
-+extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
-+extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
-+
-+
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/clk.h>
-+
-+#include <lantiq_soc.h>
-+
-+#define IFX_PCIE_GPIO_RESET  38
-+#define IFX_REG_R32	ltq_r32
-+#define IFX_REG_W32	ltq_w32
-+#define CONFIG_IFX_PCIE_HW_SWAP
-+#define IFX_RCU_AHB_ENDIAN                      ((volatile u32*)(IFX_RCU + 0x004C))
-+#define IFX_RCU_RST_REQ                         ((volatile u32*)(IFX_RCU + 0x0010))
-+#define IFX_RCU_AHB_BE_PCIE_PDI                  0x00000080  /* Configure PCIE PDI module in big endian*/
-+
-+#define IFX_RCU                                 (KSEG1 | 0x1F203000)
-+#define IFX_RCU_AHB_BE_PCIE_M                    0x00000001  /* Configure AHB master port that connects to PCIe RC in big endian */
-+#define IFX_RCU_AHB_BE_PCIE_S                    0x00000010  /* Configure AHB slave port that connects to PCIe RC in little endian */
-+#define IFX_RCU_AHB_BE_XBAR_M                    0x00000002  /* Configure AHB master port that connects to XBAR in big endian */
-+#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+
-+#define IFX_PMU1_MODULE_PCIE_PHY   (0)
-+#define IFX_PMU1_MODULE_PCIE_CTRL  (1)
-+#define IFX_PMU1_MODULE_PDI        (4)
-+#define IFX_PMU1_MODULE_MSI        (5)
-+
-+#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
-+
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("ltq_pcie", "ahb");
-+	clk_enable(clk);
-+	//ltq_pmu_enable(PMU_AHBM | PMU_AHBS);
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+    reg |= IFX_RCU_AHB_BE_PCIE_M;
-+    reg |= IFX_RCU_AHB_BE_PCIE_S;
-+    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#else 
-+    reg |= IFX_RCU_AHB_BE_PCIE_M;
-+    reg &= ~IFX_RCU_AHB_BE_PCIE_S;
-+    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("ltq_pcie", "phy");
-+	clk_enable(clk);
-+	//ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY);
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("ltq_pcie", "phy");
-+	clk_disable(clk);
-+	//ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY);
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* SRAM2PDI endianness control. */
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+    /* Config AHB->PCIe and PDI endianness */
-+    reg |= IFX_RCU_AHB_BE_PCIE_PDI;
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("ltq_pcie", "pdi");
-+	clk_enable(clk);
-+	//ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI);
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+    /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly  */
-+    reg |= 0x00400000;
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    /* Reset PCIe PHY & Core, bit 22 */
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg &= ~0x00400000;
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg |= 0x00001000; /* Bit 12 */
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg &= ~0x00001000; /* Bit 12 */
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+	gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
-+  //  ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+    mdelay(100);
-+	gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+//    ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("ltq_pcie", "ctl");
-+	clk_enable(clk);
-+	clk = clk_get_sys("ltq_pcie", "bus");
-+	clk_enable(clk);
-+
-+	//ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL);
-+	//ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK);
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+	struct clk *clk;
-+    pcie_msi_pic_init(pcie_port);
-+	clk = clk_get_sys("ltq_pcie", "msi");
-+	clk_enable(clk);
-+	//ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI);
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+    u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_PCI_LANTIQ
-+    if (pcibios_host_nr() > 1) {
-+        tbus_number -= pcibios_1st_host_bus_nr();
-+    }
-+#endif /* CONFIG_PCI_LANTIQ */
-+    return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+    struct pci_dev *pdev;
-+    u32 tvalue = value;
-+
-+    /* Sanity check */
-+    pdev = pci_get_slot(bus, devfn);
-+    if (pdev == NULL) {
-+        return tvalue;
-+    }
-+
-+    /* Only care about PCI bridge */
-+    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+        return tvalue;
-+    }
-+
-+    if (read) { /* Read hack */
-+    #ifdef CONFIG_PCI_LANTIQ
-+        if (pcibios_host_nr() > 1) {
-+            tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+        }
-+    #endif /* CONFIG_PCI_LANTIQ */
-+    }
-+    else { /* Write hack */
-+    #ifdef CONFIG_PCI_LANTIQ
-+        if (pcibios_host_nr() > 1) {
-+            tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+        }
-+    #endif
-+    }
-+    return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_VR9_H */
-+
---- a/drivers/pci/pcie/aer/Kconfig
-+++ b/drivers/pci/pcie/aer/Kconfig
-@@ -19,6 +19,7 @@ config PCIEAER
- config PCIE_ECRC
- 	bool "PCI Express ECRC settings control"
- 	depends on PCIEAER
-+	default n
- 	help
- 	  Used to override firmware/bios settings for PCI Express ECRC
- 	  (transaction layer end-to-end CRC checking).
---- a/include/linux/pci.h
-+++ b/include/linux/pci.h
-@@ -1156,6 +1156,8 @@ void pci_walk_bus(struct pci_bus *top, i
- 		  void *userdata);
- int pci_cfg_space_size(struct pci_dev *dev);
- unsigned char pci_bus_max_busnr(struct pci_bus *bus);
-+int pcibios_host_nr(void);
-+int pcibios_1st_host_bus_nr(void);
- void pci_setup_bridge(struct pci_bus *bus);
- resource_size_t pcibios_window_alignment(struct pci_bus *bus,
- 					 unsigned long type);
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1050,6 +1050,12 @@
- #define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
- #define PCI_DEVICE_ID_SGI_IOC4		0x100a
- 
-+#define PCI_VENDOR_ID_INFINEON		0x15D1
-+#define PCI_DEVICE_ID_INFINEON_DANUBE	0x000F
-+#define PCI_DEVICE_ID_INFINEON_PCIE	0x0011
-+#define PCI_VENDOR_ID_LANTIQ		0x1BEF
-+#define PCI_DEVICE_ID_LANTIQ_PCIE	0x00
-+
- #define PCI_VENDOR_ID_WINBOND		0x10ad
- #define PCI_DEVICE_ID_WINBOND_82C105	0x0105
- #define PCI_DEVICE_ID_WINBOND_83C553	0x0565
diff --git a/target/linux/lantiq/patches-3.18/0002-MIPS-lantiq-dtb-image-hack.patch b/target/linux/lantiq/patches-3.18/0002-MIPS-lantiq-dtb-image-hack.patch
deleted file mode 100644
index 6919c70a25..0000000000
--- a/target/linux/lantiq/patches-3.18/0002-MIPS-lantiq-dtb-image-hack.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 17348293f7f8103c97c8d2a6b0ef36eae06ec371 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 09:36:16 +0100
-Subject: [PATCH 02/36] MIPS: lantiq: dtb image hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/Makefile |    2 --
- arch/mips/lantiq/prom.c   |    4 +++-
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/mips/lantiq/prom.c
-+++ b/arch/mips/lantiq/prom.c
-@@ -58,6 +58,8 @@ static void __init prom_init_cmdline(voi
- 	}
- }
- 
-+extern struct boot_param_header __image_dtb;
-+
- void __init plat_mem_setup(void)
- {
- 	ioport_resource.start = IOPORT_RESOURCE_START;
-@@ -71,7 +73,7 @@ void __init plat_mem_setup(void)
- 	 * Load the builtin devicetree. This causes the chosen node to be
- 	 * parsed resulting in our memory appearing
- 	 */
--	__dt_setup_arch(__dtb_start);
-+	__dt_setup_arch(&__image_dtb);
- }
- 
- void __init device_tree_init(void)
diff --git a/target/linux/lantiq/patches-3.18/0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch b/target/linux/lantiq/patches-3.18/0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch
deleted file mode 100644
index cc281b6f8f..0000000000
--- a/target/linux/lantiq/patches-3.18/0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 16e315864132b59749faff739230daf4cee9abbb Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 10:04:01 +0100
-Subject: [PATCH 03/36] MIPS: lantiq: handle vmmc memory reservation
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/xway/Makefile |    2 ++
- arch/mips/lantiq/xway/vmmc.c   |   63 ++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 65 insertions(+)
- create mode 100644 arch/mips/lantiq/xway/vmmc.c
-
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,3 +1,5 @@
- obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
- 
-+obj-y += vmmc.o
-+
- obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/vmmc.c
-@@ -0,0 +1,63 @@
-+/*
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ *
-+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_gpio.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <lantiq_soc.h>
-+
-+static unsigned int *cp1_base = 0;
-+unsigned int* ltq_get_cp1_base(void)
-+{
-+	if (!cp1_base)
-+		panic("no cp1 base was set\n");
-+	return cp1_base;
-+}
-+EXPORT_SYMBOL(ltq_get_cp1_base);
-+
-+static int vmmc_probe(struct platform_device *pdev)
-+{
-+#define CP1_SIZE       (1 << 20)
-+	int gpio_count;
-+	dma_addr_t dma;
-+	cp1_base =
-+		(void*)CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE, &dma, GFP_ATOMIC));
-+
-+	gpio_count = of_gpio_count(pdev->dev.of_node);
-+	while (gpio_count > 0) {
-+		enum of_gpio_flags flags;
-+		int gpio = of_get_gpio_flags(pdev->dev.of_node, --gpio_count, &flags);
-+		if (gpio_request(gpio, "vmmc-relay"))
-+			continue;
-+		dev_info(&pdev->dev, "requested GPIO %d\n", gpio);
-+		gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+	}
-+
-+	dev_info(&pdev->dev, "reserved %dMB at 0x%p", CP1_SIZE >> 20, cp1_base);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id vmmc_match[] = {
-+	{ .compatible = "lantiq,vmmc" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, vmmc_match);
-+
-+static struct platform_driver vmmc_driver = {
-+	.probe = vmmc_probe,
-+	.driver = {
-+		.name = "lantiq,vmmc",
-+		.owner = THIS_MODULE,
-+		.of_match_table = vmmc_match,
-+	},
-+};
-+
-+module_platform_driver(vmmc_driver);
diff --git a/target/linux/lantiq/patches-3.18/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-3.18/0004-MIPS-lantiq-add-atm-hack.patch
deleted file mode 100644
index 39b5e5b7ac..0000000000
--- a/target/linux/lantiq/patches-3.18/0004-MIPS-lantiq-add-atm-hack.patch
+++ /dev/null
@@ -1,500 +0,0 @@
-From 9afadf01b1be371ee88491819aa67364684461f9 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 3 Aug 2012 10:27:25 +0200
-Subject: [PATCH 04/36] MIPS: lantiq: add atm hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-lantiq/lantiq_atm.h |  196 +++++++++++++++++++++++
- arch/mips/include/asm/mach-lantiq/lantiq_ptm.h |  203 ++++++++++++++++++++++++
- arch/mips/lantiq/irq.c                         |    2 +
- arch/mips/mm/cache.c                           |    2 +
- include/uapi/linux/atm.h                       |    6 +
- net/atm/common.c                               |    6 +
- net/atm/proc.c                                 |    2 +-
- 7 files changed, 416 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
-@@ -0,0 +1,196 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifx_atm.h
-+** PROJECT      : UEIP
-+** MODULES      : ATM
-+**
-+** DATE         : 17 Jun 2009
-+** AUTHOR       : Xu Liang
-+** DESCRIPTION  : Global ATM driver header file
-+** COPYRIGHT    :       Copyright (c) 2006
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 07 JUL 2009  Xu Liang        Init Version
-+*******************************************************************************/
-+
-+#ifndef IFX_ATM_H
-+#define IFX_ATM_H
-+
-+
-+
-+/*!
-+  \defgroup IFX_ATM UEIP Project - ATM driver module
-+  \brief UEIP Project - ATM driver module, support Danube, Amazon-SE, AR9, VR9.
-+ */
-+
-+/*!
-+  \defgroup IFX_ATM_IOCTL IOCTL Commands
-+  \ingroup IFX_ATM
-+  \brief IOCTL Commands used by user application.
-+ */
-+
-+/*!
-+  \defgroup IFX_ATM_STRUCT Structures
-+  \ingroup IFX_ATM
-+  \brief Structures used by user application.
-+ */
-+
-+/*!
-+  \file ifx_atm.h
-+  \ingroup IFX_ATM
-+  \brief ATM driver header file
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ *              Definition
-+ * ####################################
-+ */
-+
-+/*!
-+  \addtogroup IFX_ATM_STRUCT
-+ */
-+/*@{*/
-+
-+/*
-+ *  ATM MIB
-+ */
-+
-+/*!
-+  \struct atm_cell_ifEntry_t
-+  \brief Structure used for Cell Level MIB Counters.
-+
-+  User application use this structure to call IOCTL command "PPE_ATM_MIB_CELL".
-+ */
-+typedef struct {
-+	__u32	ifHCInOctets_h;     /*!< byte counter of ingress cells (upper 32 bits, total 64 bits)   */
-+	__u32	ifHCInOctets_l;     /*!< byte counter of ingress cells (lower 32 bits, total 64 bits)   */
-+	__u32	ifHCOutOctets_h;    /*!< byte counter of egress cells (upper 32 bits, total 64 bits)    */
-+	__u32	ifHCOutOctets_l;    /*!< byte counter of egress cells (lower 32 bits, total 64 bits)    */
-+	__u32	ifInErrors;         /*!< counter of error ingress cells     */
-+	__u32	ifInUnknownProtos;  /*!< counter of unknown ingress cells   */
-+	__u32	ifOutErrors;        /*!< counter of error egress cells      */
-+} atm_cell_ifEntry_t;
-+
-+/*!
-+  \struct atm_aal5_ifEntry_t
-+  \brief Structure used for AAL5 Frame Level MIB Counters.
-+
-+  User application use this structure to call IOCTL command "PPE_ATM_MIB_AAL5".
-+ */
-+typedef struct {
-+	__u32	ifHCInOctets_h;     /*!< byte counter of ingress packets (upper 32 bits, total 64 bits) */
-+	__u32	ifHCInOctets_l;     /*!< byte counter of ingress packets (lower 32 bits, total 64 bits) */
-+	__u32	ifHCOutOctets_h;    /*!< byte counter of egress packets (upper 32 bits, total 64 bits)  */
-+	__u32	ifHCOutOctets_l;    /*!< byte counter of egress packets (lower 32 bits, total 64 bits)  */
-+	__u32	ifInUcastPkts;      /*!< counter of ingress packets         */
-+	__u32	ifOutUcastPkts;     /*!< counter of egress packets          */
-+	__u32	ifInErrors;         /*!< counter of error ingress packets   */
-+	__u32	ifInDiscards;       /*!< counter of dropped ingress packets */
-+	__u32	ifOutErros;         /*!< counter of error egress packets    */
-+	__u32	ifOutDiscards;      /*!< counter of dropped egress packets  */
-+} atm_aal5_ifEntry_t;
-+
-+/*!
-+  \struct atm_aal5_vcc_t
-+  \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
-+
-+  This structure is a part of structure "atm_aal5_vcc_x_t".
-+ */
-+typedef struct {
-+	__u32	aal5VccCrcErrors;       /*!< counter of ingress packets with CRC error  */
-+	__u32	aal5VccSarTimeOuts;     /*!< counter of ingress packets with Re-assemble timeout    */  //no timer support yet
-+	__u32	aal5VccOverSizedSDUs;   /*!< counter of oversized ingress packets       */
-+} atm_aal5_vcc_t;
-+
-+/*!
-+  \struct atm_aal5_vcc_x_t
-+  \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
-+
-+  User application use this structure to call IOCTL command "PPE_ATM_MIB_VCC".
-+ */
-+typedef struct {
-+	int             vpi;        /*!< VPI of the VCC to get MIB counters */
-+	int             vci;        /*!< VCI of the VCC to get MIB counters */
-+	atm_aal5_vcc_t  mib_vcc;    /*!< structure to get MIB counters      */
-+} atm_aal5_vcc_x_t;
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ *                IOCTL
-+ * ####################################
-+ */
-+
-+/*!
-+  \addtogroup IFX_ATM_IOCTL
-+ */
-+/*@{*/
-+
-+/*
-+ *  ioctl Command
-+ */
-+/*!
-+  \brief ATM IOCTL Magic Number
-+ */
-+#define PPE_ATM_IOC_MAGIC       'o'
-+/*!
-+  \brief ATM IOCTL Command - Get Cell Level MIB Counters
-+
-+   This command is obsolete. User can get cell level MIB from DSL API.
-+   This command uses structure "atm_cell_ifEntry_t" as parameter for output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_CELL        _IOW(PPE_ATM_IOC_MAGIC,  0, atm_cell_ifEntry_t)
-+/*!
-+  \brief ATM IOCTL Command - Get AAL5 Level MIB Counters
-+
-+   Get AAL5 packet counters.
-+   This command uses structure "atm_aal5_ifEntry_t" as parameter for output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_AAL5        _IOW(PPE_ATM_IOC_MAGIC,  1, atm_aal5_ifEntry_t)
-+/*!
-+  \brief ATM IOCTL Command - Get Per PVC MIB Counters
-+
-+   Get AAL5 packet counters for each PVC.
-+   This command uses structure "atm_aal5_vcc_x_t" as parameter for input of VPI/VCI information and output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_VCC         _IOWR(PPE_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t)
-+/*!
-+  \brief Total Number of ATM IOCTL Commands
-+ */
-+#define PPE_ATM_IOC_MAXNR       3
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ *                 API
-+ * ####################################
-+ */
-+
-+#ifdef __KERNEL__
-+struct port_cell_info {
-+    unsigned int    port_num;
-+    unsigned int    tx_link_rate[2];
-+};
-+#endif
-+
-+
-+
-+#endif  //  IFX_ATM_H
-+
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
-@@ -0,0 +1,203 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifx_ptm.h
-+** PROJECT      : UEIP
-+** MODULES      : PTM
-+**
-+** DATE         : 17 Jun 2009
-+** AUTHOR       : Xu Liang
-+** DESCRIPTION  : Global PTM driver header file
-+** COPYRIGHT    :       Copyright (c) 2006
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 07 JUL 2009  Xu Liang        Init Version
-+*******************************************************************************/
-+
-+#ifndef IFX_PTM_H
-+#define IFX_PTM_H
-+
-+
-+
-+/*!
-+  \defgroup IFX_PTM UEIP Project - PTM driver module
-+  \brief UEIP Project - PTM driver module, support Danube, Amazon-SE, AR9, VR9.
-+ */
-+
-+/*!
-+  \defgroup IFX_PTM_IOCTL IOCTL Commands
-+  \ingroup IFX_PTM
-+  \brief IOCTL Commands used by user application.
-+ */
-+
-+/*!
-+  \defgroup IFX_PTM_STRUCT Structures
-+  \ingroup IFX_PTM
-+  \brief Structures used by user application.
-+ */
-+
-+/*!
-+  \file ifx_ptm.h
-+  \ingroup IFX_PTM
-+  \brief PTM driver header file
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ *              Definition
-+ * ####################################
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ *                IOCTL
-+ * ####################################
-+ */
-+
-+/*!
-+  \addtogroup IFX_PTM_IOCTL
-+ */
-+/*@{*/
-+
-+/*
-+ *  ioctl Command
-+ */
-+/*!
-+  \brief PTM IOCTL Command - Get codeword MIB counters.
-+
-+  This command uses structure "PTM_CW_IF_ENTRY_T" to get codeword level MIB counters.
-+ */
-+#define IFX_PTM_MIB_CW_GET              SIOCDEVPRIVATE + 1
-+/*!
-+  \brief PTM IOCTL Command - Get packet MIB counters.
-+
-+  This command uses structure "PTM_FRAME_MIB_T" to get packet level MIB counters.
-+ */
-+#define IFX_PTM_MIB_FRAME_GET           SIOCDEVPRIVATE + 2
-+/*!
-+  \brief PTM IOCTL Command - Get firmware configuration (CRC).
-+
-+  This command uses structure "IFX_PTM_CFG_T" to get firmware configuration (CRC).
-+ */
-+#define IFX_PTM_CFG_GET                 SIOCDEVPRIVATE + 3
-+/*!
-+  \brief PTM IOCTL Command - Set firmware configuration (CRC).
-+
-+  This command uses structure "IFX_PTM_CFG_T" to set firmware configuration (CRC).
-+ */
-+#define IFX_PTM_CFG_SET                 SIOCDEVPRIVATE + 4
-+/*!
-+  \brief PTM IOCTL Command - Program priority value to TX queue mapping.
-+
-+  This command uses structure "IFX_PTM_PRIO_Q_MAP_T" to program priority value to TX queue mapping.
-+ */
-+#define IFX_PTM_MAP_PKT_PRIO_TO_Q       SIOCDEVPRIVATE + 14
-+
-+/*@}*/
-+
-+
-+/*!
-+  \addtogroup IFX_PTM_STRUCT
-+ */
-+/*@{*/
-+
-+/*
-+ *  ioctl Data Type
-+ */
-+
-+/*!
-+  \typedef PTM_CW_IF_ENTRY_T
-+  \brief Wrapping of structure "ptm_cw_ifEntry_t".
-+ */
-+/*!
-+  \struct ptm_cw_ifEntry_t
-+  \brief Structure used for CodeWord level MIB counters.
-+ */
-+typedef struct ptm_cw_ifEntry_t {
-+    uint32_t    ifRxNoIdleCodewords;    /*!< output, number of ingress user codeword */
-+    uint32_t    ifRxIdleCodewords;      /*!< output, number of ingress idle codeword */
-+    uint32_t    ifRxCodingViolation;    /*!< output, number of error ingress codeword */
-+    uint32_t    ifTxNoIdleCodewords;    /*!< output, number of egress user codeword */
-+    uint32_t    ifTxIdleCodewords;      /*!< output, number of egress idle codeword */
-+} PTM_CW_IF_ENTRY_T;
-+
-+/*!
-+  \typedef PTM_FRAME_MIB_T
-+  \brief Wrapping of structure "ptm_frame_mib_t".
-+ */
-+/*!
-+  \struct ptm_frame_mib_t
-+  \brief Structure used for packet level MIB counters.
-+ */
-+typedef struct ptm_frame_mib_t {
-+    uint32_t    RxCorrect;      /*!< output, number of ingress packet */
-+    uint32_t    TC_CrcError;    /*!< output, number of egress packet with CRC error */
-+    uint32_t    RxDropped;      /*!< output, number of dropped ingress packet */
-+    uint32_t    TxSend;         /*!< output, number of egress packet */
-+} PTM_FRAME_MIB_T;
-+
-+/*!
-+  \typedef IFX_PTM_CFG_T
-+  \brief Wrapping of structure "ptm_cfg_t".
-+ */
-+/*!
-+  \struct ptm_cfg_t
-+  \brief Structure used for ETH/TC CRC configuration.
-+ */
-+typedef struct ptm_cfg_t {
-+    uint32_t    RxEthCrcPresent;    /*!< input/output, ingress packet has ETH CRC */
-+    uint32_t    RxEthCrcCheck;      /*!< input/output, check ETH CRC of ingress packet */
-+    uint32_t    RxTcCrcCheck;       /*!< input/output, check TC CRC of ingress codeword */
-+    uint32_t    RxTcCrcLen;         /*!< input/output, length of TC CRC of ingress codeword */
-+    uint32_t    TxEthCrcGen;        /*!< input/output, generate ETH CRC for egress packet */
-+    uint32_t    TxTcCrcGen;         /*!< input/output, generate TC CRC for egress codeword */
-+    uint32_t    TxTcCrcLen;         /*!< input/output, length of TC CRC of egress codeword */
-+} IFX_PTM_CFG_T;
-+
-+/*!
-+  \typedef IFX_PTM_PRIO_Q_MAP_T
-+  \brief Wrapping of structure "ppe_prio_q_map".
-+ */
-+/*!
-+  \struct ppe_prio_q_map
-+  \brief Structure used for Priority Value to TX Queue mapping.
-+ */
-+typedef struct ppe_prio_q_map {
-+    int             pkt_prio;
-+    int             qid;
-+    int             vpi;    //  ignored in eth interface
-+    int             vci;    //  ignored in eth interface
-+} IFX_PTM_PRIO_Q_MAP_T;
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ *                 API
-+ * ####################################
-+ */
-+
-+#ifdef __KERNEL__
-+struct port_cell_info {
-+    unsigned int    port_num;
-+    unsigned int    tx_link_rate[2];
-+};
-+#endif
-+
-+
-+
-+#endif  //  IFX_PTM_H
-+
---- a/arch/mips/lantiq/irq.c
-+++ b/arch/mips/lantiq/irq.c
-@@ -14,6 +14,7 @@
- #include <linux/of_platform.h>
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
-+#include <linux/module.h>
- 
- #include <asm/bootinfo.h>
- #include <asm/irq_cpu.h>
-@@ -99,6 +100,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
- 	ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
- 	ltq_icu_w32(im, BIT(offset), isr);
- }
-+EXPORT_SYMBOL(ltq_mask_and_ack_irq);
- 
- static void ltq_ack_irq(struct irq_data *d)
- {
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -59,6 +59,8 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_wback);
-+EXPORT_SYMBOL(_dma_cache_inv);
- 
- #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
- 
---- a/include/uapi/linux/atm.h
-+++ b/include/uapi/linux/atm.h
-@@ -130,8 +130,14 @@
- #define ATM_ABR		4
- #define ATM_ANYCLASS	5		/* compatible with everything */
- 
-+#define ATM_VBR_NRT     ATM_VBR
-+#define ATM_VBR_RT      6
-+#define ATM_UBR_PLUS    7
-+#define ATM_GFR         8
-+
- #define ATM_MAX_PCR	-1		/* maximum available PCR */
- 
-+
- struct atm_trafprm {
- 	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
- 	int		max_pcr;	/* maximum PCR in cells per second */
---- a/net/atm/common.c
-+++ b/net/atm/common.c
-@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
- 	write_unlock_irq(&vcc_sklist_lock);
- }
- 
-+struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL;
-+EXPORT_SYMBOL(ifx_atm_alloc_tx);
-+
- static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size)
- {
- 	struct sk_buff *skb;
- 	struct sock *sk = sk_atm(vcc);
- 
-+	if (ifx_atm_alloc_tx != NULL)
-+		return ifx_atm_alloc_tx(vcc, size);
-+
- 	if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
- 		pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
- 			 sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
---- a/net/atm/proc.c
-+++ b/net/atm/proc.c
-@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
- static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
- {
- 	static const char *const class_name[] = {
--		"off", "UBR", "CBR", "VBR", "ABR"};
-+		"off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"};
- 	static const char *const aal_name[] = {
- 		"---",	"1",	"2",	"3/4",	/*  0- 3 */
- 		"???",	"5",	"???",	"???",	/*  4- 7 */
diff --git a/target/linux/lantiq/patches-3.18/0005-MIPS-lantiq-add-reset-controller-api-support.patch b/target/linux/lantiq/patches-3.18/0005-MIPS-lantiq-add-reset-controller-api-support.patch
deleted file mode 100644
index 31290195b8..0000000000
--- a/target/linux/lantiq/patches-3.18/0005-MIPS-lantiq-add-reset-controller-api-support.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 223f1c46e109a8420765aee099a5d1dc4ab7ee98 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 3 Sep 2013 13:18:12 +0200
-Subject: [PATCH 05/36] MIPS: lantiq: add reset-controller api support
-
-Add a reset-controller binding for the reset registers found on the lantiq
-SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/xway/reset.c |   61 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 61 insertions(+)
-
---- a/arch/mips/lantiq/xway/reset.c
-+++ b/arch/mips/lantiq/xway/reset.c
-@@ -14,6 +14,7 @@
- #include <linux/delay.h>
- #include <linux/of_address.h>
- #include <linux/of_platform.h>
-+#include <linux/reset-controller.h>
- 
- #include <asm/reboot.h>
- 
-@@ -113,6 +114,66 @@ void ltq_reset_once(unsigned int module,
- 	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
- }
- 
-+static int ltq_assert_device(struct reset_controller_dev *rcdev,
-+				unsigned long id)
-+{
-+	u32 val;
-+
-+	if (id < 8)
-+		return -1;
-+
-+	val = ltq_rcu_r32(RCU_RST_REQ);
-+	val |= BIT(id);
-+	ltq_rcu_w32(val, RCU_RST_REQ);
-+
-+	return 0;
-+}
-+
-+static int ltq_deassert_device(struct reset_controller_dev *rcdev,
-+				  unsigned long id)
-+{
-+	u32 val;
-+
-+	if (id < 8)
-+		return -1;
-+
-+	val = ltq_rcu_r32(RCU_RST_REQ);
-+	val &= ~BIT(id);
-+	ltq_rcu_w32(val, RCU_RST_REQ);
-+
-+	return 0;
-+}
-+
-+static int ltq_reset_device(struct reset_controller_dev *rcdev,
-+			       unsigned long id)
-+{
-+	ltq_assert_device(rcdev, id);
-+	return ltq_deassert_device(rcdev, id);
-+}
-+
-+static struct reset_control_ops reset_ops = {
-+	.reset = ltq_reset_device,
-+	.assert = ltq_assert_device,
-+	.deassert = ltq_deassert_device,
-+};
-+
-+static struct reset_controller_dev reset_dev = {
-+	.ops			= &reset_ops,
-+	.owner			= THIS_MODULE,
-+	.nr_resets		= 32,
-+	.of_reset_n_cells	= 1,
-+};
-+
-+void ltq_rst_init(void)
-+{
-+	reset_dev.of_node = of_find_compatible_node(NULL, NULL,
-+						"lantiq,xway-reset");
-+	if (!reset_dev.of_node)
-+		pr_err("Failed to find reset controller node");
-+	else
-+		reset_controller_register(&reset_dev);
-+}
-+
- static void ltq_machine_restart(char *command)
- {
- 	local_irq_disable();
diff --git a/target/linux/lantiq/patches-3.18/0006-MIPS-lantiq-reboot-gphy-on-restart.patch b/target/linux/lantiq/patches-3.18/0006-MIPS-lantiq-reboot-gphy-on-restart.patch
deleted file mode 100644
index 1af4fa7b22..0000000000
--- a/target/linux/lantiq/patches-3.18/0006-MIPS-lantiq-reboot-gphy-on-restart.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From f81979f4b297693ac70616feaa4a79bdcb11db35 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:55:57 +0200
-Subject: [PATCH 06/36] MIPS: lantiq: reboot gphy on restart
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/xway/reset.c |    9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
---- a/arch/mips/lantiq/xway/reset.c
-+++ b/arch/mips/lantiq/xway/reset.c
-@@ -176,8 +176,15 @@ void ltq_rst_init(void)
- 
- static void ltq_machine_restart(char *command)
- {
-+	u32 val = ltq_rcu_r32(RCU_RST_REQ);
-+
-+	if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200"))
-+		val |= RCU_RD_GPHY1_XRX200 | RCU_RD_GPHY0_XRX200;
-+
-+	val |= RCU_RD_SRST;
-+
- 	local_irq_disable();
--	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | RCU_RD_SRST, RCU_RST_REQ);
-+	ltq_rcu_w32(val, RCU_RST_REQ);
- 	unreachable();
- }
- 
diff --git a/target/linux/lantiq/patches-3.18/0007-MIPS-lantiq-add-basic-tffs-driver.patch b/target/linux/lantiq/patches-3.18/0007-MIPS-lantiq-add-basic-tffs-driver.patch
deleted file mode 100644
index 70813738cc..0000000000
--- a/target/linux/lantiq/patches-3.18/0007-MIPS-lantiq-add-basic-tffs-driver.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From d27ec8bb97db0f60d81ab255d51ac4e967362067 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:34:19 +0200
-Subject: [PATCH 07/36] MIPS: lantiq: add basic tffs driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/xway/Makefile |    2 +-
- arch/mips/lantiq/xway/tffs.c   |   87 ++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 88 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/lantiq/xway/tffs.c
-
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,5 +1,5 @@
- obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
- 
--obj-y += vmmc.o
-+obj-y += vmmc.o tffs.o
- 
- obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/tffs.c
-@@ -0,0 +1,87 @@
-+#include <linux/module.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+
-+struct tffs_entry {
-+    uint16_t id;
-+    uint16_t len;
-+};
-+
-+static struct tffs_id {
-+	uint32_t id;
-+	char *name;
-+	unsigned char *val;
-+	uint32_t offset;
-+	uint32_t len;
-+} ids[] = {
-+	{ 0x01A9, "annex" },
-+	{ 0x0188, "maca" },
-+	{ 0x0189, "macb" },
-+	{ 0x018a, "macwlan" },
-+	{ 0x0195, "macwlan2" },
-+	{ 0x018b, "macdsl" },
-+	{ 0x01C2, "webgui_pass" },
-+	{ 0x01AB, "wlan_key" },
-+};
-+
-+static struct mtd_info *tffs1, *tffs2;
-+
-+static struct tffs_id* tffs_find_id(int id)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(ids); i++)
-+		if (id == ids[i].id)
-+			return &ids[i];
-+
-+	return NULL;
-+}
-+
-+static void tffs_index(void)
-+{
-+	struct tffs_entry *E = NULL;
-+	struct tffs_entry entry;
-+	int ret, retlen;
-+
-+	while ((unsigned int) E + sizeof(struct tffs_entry) < tffs2->size) {
-+		struct tffs_id *id;
-+		int len;
-+
-+		ret = mtd_read(tffs2, (unsigned int) E, sizeof(struct tffs_entry), &retlen, (unsigned char *)&entry);
-+		if (ret)
-+			return;
-+
-+		if (entry.id == 0xffff)
-+			return;
-+
-+		id = tffs_find_id(entry.id);
-+		if (id) {
-+			id->offset = (uint32_t) E;
-+			id->len = entry.len;
-+			id->val = kzalloc(entry.len + 1, GFP_KERNEL);
-+			mtd_read(tffs2, ((unsigned int) E) + sizeof(struct tffs_entry), entry.len, &retlen, id->val);
-+
-+		}
-+		//printk(KERN_INFO "found entry at 0x%08X-> [<0x%x> %u bytes]\n", (uint32_t) E, entry.id, entry.len);
-+		if (id && id->name)
-+			printk(KERN_INFO "found entry name -> %s=%s\n", id->name, id->val);
-+
-+		len = (entry.len + 3) & ~0x03;
-+		E = (struct tffs_entry *)(((unsigned int)E) + sizeof(struct tffs_entry) + len);
-+	}
-+}
-+
-+static int __init tffs_init(void)
-+{
-+	tffs1 = get_mtd_device_nm("tffs (1)");
-+	tffs2 = get_mtd_device_nm("tffs (2)");
-+	if (IS_ERR(tffs1) || IS_ERR(tffs2))
-+		return -1;
-+
-+	tffs_index();
-+
-+	return 0;
-+}
-+late_initcall(tffs_init);
-+
diff --git a/target/linux/lantiq/patches-3.18/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-3.18/0008-MIPS-lantiq-backport-old-timer-code.patch
deleted file mode 100644
index 55255037fa..0000000000
--- a/target/linux/lantiq/patches-3.18/0008-MIPS-lantiq-backport-old-timer-code.patch
+++ /dev/null
@@ -1,1028 +0,0 @@
-From 94800350cb8d2f29dda2206b5e9a3772024ee168 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:30:56 +0200
-Subject: [PATCH 08/36] MIPS: lantiq: backport old timer code
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-lantiq/lantiq_timer.h |  155 ++++
- arch/mips/lantiq/xway/Makefile                   |    2 +-
- arch/mips/lantiq/xway/timer.c                    |  845 ++++++++++++++++++++++
- 3 files changed, 1001 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h
- create mode 100644 arch/mips/lantiq/xway/timer.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
-@@ -0,0 +1,155 @@
-+#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-+#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-+
-+
-+/******************************************************************************
-+       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
-+
-+                               No Warranty
-+   Because the program is licensed free of charge, there is no warranty for
-+   the program, to the extent permitted by applicable law.  Except when
-+   otherwise stated in writing the copyright holders and/or other parties
-+   provide the program "as is" without warranty of any kind, either
-+   expressed or implied, including, but not limited to, the implied
-+   warranties of merchantability and fitness for a particular purpose. The
-+   entire risk as to the quality and performance of the program is with
-+   you.  should the program prove defective, you assume the cost of all
-+   necessary servicing, repair or correction.
-+
-+   In no event unless required by applicable law or agreed to in writing
-+   will any copyright holder, or any other party who may modify and/or
-+   redistribute the program as permitted above, be liable to you for
-+   damages, including any general, special, incidental or consequential
-+   damages arising out of the use or inability to use the program
-+   (including but not limited to loss of data or data being rendered
-+   inaccurate or losses sustained by you or third parties or a failure of
-+   the program to operate with any other programs), even if such holder or
-+   other party has been advised of the possibility of such damages.
-+******************************************************************************/
-+
-+
-+/*
-+ * ####################################
-+ *              Definition
-+ * ####################################
-+ */
-+
-+/*
-+ *  Available Timer/Counter Index
-+ */
-+#define TIMER(n, X)                     (n * 2 + (X ? 1 : 0))
-+#define TIMER_ANY                       0x00
-+#define TIMER1A                         TIMER(1, 0)
-+#define TIMER1B                         TIMER(1, 1)
-+#define TIMER2A                         TIMER(2, 0)
-+#define TIMER2B                         TIMER(2, 1)
-+#define TIMER3A                         TIMER(3, 0)
-+#define TIMER3B                         TIMER(3, 1)
-+
-+/*
-+ *  Flag of Timer/Counter
-+ *  These flags specify the way in which timer is configured.
-+ */
-+/*  Bit size of timer/counter.                      */
-+#define TIMER_FLAG_16BIT                0x0000
-+#define TIMER_FLAG_32BIT                0x0001
-+/*  Switch between timer and counter.               */
-+#define TIMER_FLAG_TIMER                0x0000
-+#define TIMER_FLAG_COUNTER              0x0002
-+/*  Stop or continue when overflowing/underflowing. */
-+#define TIMER_FLAG_ONCE                 0x0000
-+#define TIMER_FLAG_CYCLIC               0x0004
-+/*  Count up or counter down.                       */
-+#define TIMER_FLAG_UP                   0x0000
-+#define TIMER_FLAG_DOWN                 0x0008
-+/*  Count on specific level or edge.                */
-+#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
-+#define TIMER_FLAG_LOW_LEVEL_SENSITIVE  0x0040
-+#define TIMER_FLAG_RISE_EDGE            0x0010
-+#define TIMER_FLAG_FALL_EDGE            0x0020
-+#define TIMER_FLAG_ANY_EDGE             0x0030
-+/*  Signal is syncronous to module clock or not.    */
-+#define TIMER_FLAG_UNSYNC               0x0000
-+#define TIMER_FLAG_SYNC                 0x0080
-+/*  Different interrupt handle type.                */
-+#define TIMER_FLAG_NO_HANDLE            0x0000
-+#if defined(__KERNEL__)
-+    #define TIMER_FLAG_CALLBACK_IN_IRQ  0x0100
-+#endif  //  defined(__KERNEL__)
-+#define TIMER_FLAG_SIGNAL               0x0300
-+/*  Internal clock source or external clock source  */
-+#define TIMER_FLAG_INT_SRC              0x0000
-+#define TIMER_FLAG_EXT_SRC              0x1000
-+
-+
-+/*
-+ *  ioctl Command
-+ */
-+#define GPTU_REQUEST_TIMER              0x01    /*  General method to setup timer/counter.  */
-+#define GPTU_FREE_TIMER                 0x02    /*  Free timer/counter.                     */
-+#define GPTU_START_TIMER                0x03    /*  Start or resume timer/counter.          */
-+#define GPTU_STOP_TIMER                 0x04    /*  Suspend timer/counter.                  */
-+#define GPTU_GET_COUNT_VALUE            0x05    /*  Get current count value.                */
-+#define GPTU_CALCULATE_DIVIDER          0x06    /*  Calculate timer divider from given freq.*/
-+#define GPTU_SET_TIMER                  0x07    /*  Simplified method to setup timer.       */
-+#define GPTU_SET_COUNTER                0x08    /*  Simplified method to setup counter.     */
-+
-+/*
-+ *  Data Type Used to Call ioctl
-+ */
-+struct gptu_ioctl_param {
-+    unsigned int                        timer;  /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
-+                                                 *  GPTU_SET_COUNTER, this field is ID of expected      *
-+                                                 *  timer/counter. If it's zero, a timer/counter would  *
-+                                                 *  be dynamically allocated and ID would be stored in  *
-+                                                 *  this field.                                         *
-+                                                 *  In command GPTU_GET_COUNT_VALUE, this field is      *
-+                                                 *  ignored.                                            *
-+                                                 *  In other command, this field is ID of timer/counter *
-+                                                 *  allocated.                                          */
-+    unsigned int                        flag;   /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
-+                                                 *  GPTU_SET_COUNTER, this field contains flags to      *
-+                                                 *  specify how to configure timer/counter.             *
-+                                                 *  In command GPTU_START_TIMER, zero indicate start    *
-+                                                 *  and non-zero indicate resume timer/counter.         *
-+                                                 *  In other command, this field is ignored.            */
-+    unsigned long                       value;  /*  In command GPTU_REQUEST_TIMER, this field contains  *
-+                                                 *  init/reload value.                                  *
-+                                                 *  In command GPTU_SET_TIMER, this field contains      *
-+                                                 *  frequency (0.001Hz) of timer.                       *
-+                                                 *  In command GPTU_GET_COUNT_VALUE, current count      *
-+                                                 *  value would be stored in this field.                *
-+                                                 *  In command GPTU_CALCULATE_DIVIDER, this field       *
-+                                                 *  contains frequency wanted, and after calculation,   *
-+                                                 *  divider would be stored in this field to overwrite  *
-+                                                 *  the frequency.                                      *
-+                                                 *  In other command, this field is ignored.            */
-+    int                                 pid;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
-+                                                 *  if signal is required, this field contains process  *
-+                                                 *  ID to which signal would be sent.                   *
-+                                                 *  In other command, this field is ignored.            */
-+    int                                 sig;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
-+                                                 *  if signal is required, this field contains signal   *
-+                                                 *  number which would be sent.                         *
-+                                                 *  In other command, this field is ignored.            */
-+};
-+
-+/*
-+ * ####################################
-+ *              Data Type
-+ * ####################################
-+ */
-+typedef void (*timer_callback)(unsigned long arg);
-+
-+extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
-+extern int lq_free_timer(unsigned int);
-+extern int lq_start_timer(unsigned int, int);
-+extern int lq_stop_timer(unsigned int);
-+extern int lq_reset_counter_flags(u32 timer, u32 flags);
-+extern int lq_get_count_value(unsigned int, unsigned long *);
-+extern u32 lq_cal_divider(unsigned long);
-+extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
-+extern int lq_set_counter(unsigned int timer, unsigned int flag,
-+	u32 reload, unsigned long arg1, unsigned long arg2);
-+
-+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,4 +1,4 @@
--obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
-+obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
- 
- obj-y += vmmc.o tffs.o
- 
---- /dev/null
-+++ b/arch/mips/lantiq/xway/timer.c
-@@ -0,0 +1,845 @@
-+#ifndef CONFIG_SOC_AMAZON_SE
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/fs.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <linux/uaccess.h>
-+#include <linux/unistd.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+
-+#include <asm/irq.h>
-+#include <asm/div64.h>
-+#include "../clk.h"
-+
-+#include <lantiq_soc.h>
-+#include <lantiq_irq.h>
-+#include <lantiq_timer.h>
-+
-+#define MAX_NUM_OF_32BIT_TIMER_BLOCKS	6
-+
-+#ifdef TIMER1A
-+#define FIRST_TIMER			TIMER1A
-+#else
-+#define FIRST_TIMER			2
-+#endif
-+
-+/*
-+ *  GPTC divider is set or not.
-+ */
-+#define GPTU_CLC_RMC_IS_SET		0
-+
-+/*
-+ *  Timer Interrupt (IRQ)
-+ */
-+/*  Must be adjusted when ICU driver is available */
-+#define TIMER_INTERRUPT			(INT_NUM_IM3_IRL0 + 22)
-+
-+/*
-+ *  Bits Operation
-+ */
-+#define GET_BITS(x, msb, lsb)		\
-+	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
-+#define SET_BITS(x, msb, lsb, value)	\
-+	(((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
-+	(((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
-+
-+/*
-+ *  GPTU Register Mapping
-+ */
-+#define LQ_GPTU			(KSEG1 + 0x1E100A00)
-+#define LQ_GPTU_CLC		((volatile u32 *)(LQ_GPTU + 0x0000))
-+#define LQ_GPTU_ID			((volatile u32 *)(LQ_GPTU + 0x0008))
-+#define LQ_GPTU_CON(n, X)		((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_RUN(n, X)		((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_RELOAD(n, X)	((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_COUNT(n, X)	((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_IRNEN		((volatile u32 *)(LQ_GPTU + 0x00F4))
-+#define LQ_GPTU_IRNICR		((volatile u32 *)(LQ_GPTU + 0x00F8))
-+#define LQ_GPTU_IRNCR		((volatile u32 *)(LQ_GPTU + 0x00FC))
-+
-+/*
-+ *  Clock Control Register
-+ */
-+#define GPTU_CLC_SMC			GET_BITS(*LQ_GPTU_CLC, 23, 16)
-+#define GPTU_CLC_RMC			GET_BITS(*LQ_GPTU_CLC, 15, 8)
-+#define GPTU_CLC_FSOE			(*LQ_GPTU_CLC & (1 << 5))
-+#define GPTU_CLC_EDIS			(*LQ_GPTU_CLC & (1 << 3))
-+#define GPTU_CLC_SPEN			(*LQ_GPTU_CLC & (1 << 2))
-+#define GPTU_CLC_DISS			(*LQ_GPTU_CLC & (1 << 1))
-+#define GPTU_CLC_DISR			(*LQ_GPTU_CLC & (1 << 0))
-+
-+#define GPTU_CLC_SMC_SET(value)		SET_BITS(0, 23, 16, (value))
-+#define GPTU_CLC_RMC_SET(value)		SET_BITS(0, 15, 8, (value))
-+#define GPTU_CLC_FSOE_SET(value)	((value) ? (1 << 5) : 0)
-+#define GPTU_CLC_SBWE_SET(value)	((value) ? (1 << 4) : 0)
-+#define GPTU_CLC_EDIS_SET(value)	((value) ? (1 << 3) : 0)
-+#define GPTU_CLC_SPEN_SET(value)	((value) ? (1 << 2) : 0)
-+#define GPTU_CLC_DISR_SET(value)	((value) ? (1 << 0) : 0)
-+
-+/*
-+ *  ID Register
-+ */
-+#define GPTU_ID_ID			GET_BITS(*LQ_GPTU_ID, 15, 8)
-+#define GPTU_ID_CFG			GET_BITS(*LQ_GPTU_ID, 7, 5)
-+#define GPTU_ID_REV			GET_BITS(*LQ_GPTU_ID, 4, 0)
-+
-+/*
-+ *  Control Register of Timer/Counter nX
-+ *    n is the index of block (1 based index)
-+ *    X is either A or B
-+ */
-+#define GPTU_CON_SRC_EG(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 10))
-+#define GPTU_CON_SRC_EXT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 9))
-+#define GPTU_CON_SYNC(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 8))
-+#define GPTU_CON_EDGE(n, X)		GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
-+#define GPTU_CON_INV(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 5))
-+#define GPTU_CON_EXT(n, X)		(*LQ_GPTU_CON(n, A) & (1 << 4))	/* Timer/Counter B does not have this bit */
-+#define GPTU_CON_STP(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 3))
-+#define GPTU_CON_CNT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 2))
-+#define GPTU_CON_DIR(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 1))
-+#define GPTU_CON_EN(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 0))
-+
-+#define GPTU_CON_SRC_EG_SET(value)	((value) ? 0 : (1 << 10))
-+#define GPTU_CON_SRC_EXT_SET(value)	((value) ? (1 << 9) : 0)
-+#define GPTU_CON_SYNC_SET(value)	((value) ? (1 << 8) : 0)
-+#define GPTU_CON_EDGE_SET(value)	SET_BITS(0, 7, 6, (value))
-+#define GPTU_CON_INV_SET(value)		((value) ? (1 << 5) : 0)
-+#define GPTU_CON_EXT_SET(value)		((value) ? (1 << 4) : 0)
-+#define GPTU_CON_STP_SET(value)		((value) ? (1 << 3) : 0)
-+#define GPTU_CON_CNT_SET(value)		((value) ? (1 << 2) : 0)
-+#define GPTU_CON_DIR_SET(value)		((value) ? (1 << 1) : 0)
-+
-+#define GPTU_RUN_RL_SET(value)		((value) ? (1 << 2) : 0)
-+#define GPTU_RUN_CEN_SET(value)		((value) ? (1 << 1) : 0)
-+#define GPTU_RUN_SEN_SET(value)		((value) ? (1 << 0) : 0)
-+
-+#define GPTU_IRNEN_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-+#define GPTU_IRNCR_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-+
-+#define TIMER_FLAG_MASK_SIZE(x)		(x & 0x0001)
-+#define TIMER_FLAG_MASK_TYPE(x)		(x & 0x0002)
-+#define TIMER_FLAG_MASK_STOP(x)		(x & 0x0004)
-+#define TIMER_FLAG_MASK_DIR(x)		(x & 0x0008)
-+#define TIMER_FLAG_NONE_EDGE		0x0000
-+#define TIMER_FLAG_MASK_EDGE(x)		(x & 0x0030)
-+#define TIMER_FLAG_REAL			0x0000
-+#define TIMER_FLAG_INVERT		0x0040
-+#define TIMER_FLAG_MASK_INVERT(x)	(x & 0x0040)
-+#define TIMER_FLAG_MASK_TRIGGER(x)	(x & 0x0070)
-+#define TIMER_FLAG_MASK_SYNC(x)		(x & 0x0080)
-+#define TIMER_FLAG_CALLBACK_IN_HB	0x0200
-+#define TIMER_FLAG_MASK_HANDLE(x)	(x & 0x0300)
-+#define TIMER_FLAG_MASK_SRC(x)		(x & 0x1000)
-+
-+struct timer_dev_timer {
-+	unsigned int f_irq_on;
-+	unsigned int irq;
-+	unsigned int flag;
-+	unsigned long arg1;
-+	unsigned long arg2;
-+};
-+
-+struct timer_dev {
-+	struct mutex gptu_mutex;
-+	unsigned int number_of_timers;
-+	unsigned int occupation;
-+	unsigned int f_gptu_on;
-+	struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
-+};
-+
-+
-+unsigned int ltq_get_fpi_bus_clock(int fpi) {
-+	struct clk *clk = clk_get_fpi();
-+	return clk_get_rate(clk);
-+}
-+
-+
-+static long gptu_ioctl(struct file *, unsigned int, unsigned long);
-+static int gptu_open(struct inode *, struct file *);
-+static int gptu_release(struct inode *, struct file *);
-+
-+static struct file_operations gptu_fops = {
-+	.owner = THIS_MODULE,
-+	.unlocked_ioctl = gptu_ioctl,
-+	.open = gptu_open,
-+	.release = gptu_release
-+};
-+
-+static struct miscdevice gptu_miscdev = {
-+	.minor = MISC_DYNAMIC_MINOR,
-+	.name = "gptu",
-+	.fops = &gptu_fops,
-+};
-+
-+static struct timer_dev timer_dev;
-+
-+static irqreturn_t timer_irq_handler(int irq, void *p)
-+{
-+	unsigned int timer;
-+	unsigned int flag;
-+	struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
-+
-+	timer = irq - TIMER_INTERRUPT;
-+	if (timer < timer_dev.number_of_timers
-+		&& dev_timer == &timer_dev.timer[timer]) {
-+		/*  Clear interrupt.    */
-+		ltq_w32(1 << timer, LQ_GPTU_IRNCR);
-+
-+		/*  Call user hanler or signal. */
-+		flag = dev_timer->flag;
-+		if (!(timer & 0x01)
-+			|| TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
-+			/* 16-bit timer or timer A of 32-bit timer  */
-+			switch (TIMER_FLAG_MASK_HANDLE(flag)) {
-+			case TIMER_FLAG_CALLBACK_IN_IRQ:
-+			case TIMER_FLAG_CALLBACK_IN_HB:
-+				if (dev_timer->arg1)
-+					(*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
-+				break;
-+			case TIMER_FLAG_SIGNAL:
-+				send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
-+				break;
-+			}
-+		}
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+static inline void lq_enable_gptu(void)
-+{
-+	struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
-+	clk_enable(clk);
-+
-+	//ltq_pmu_enable(PMU_GPT);
-+
-+	/*  Set divider as 1, disable write protection for SPEN, enable module. */
-+	*LQ_GPTU_CLC =
-+		GPTU_CLC_SMC_SET(0x00) |
-+		GPTU_CLC_RMC_SET(0x01) |
-+		GPTU_CLC_FSOE_SET(0) |
-+		GPTU_CLC_SBWE_SET(1) |
-+		GPTU_CLC_EDIS_SET(0) |
-+		GPTU_CLC_SPEN_SET(0) |
-+		GPTU_CLC_DISR_SET(0);
-+}
-+
-+static inline void lq_disable_gptu(void)
-+{
-+	struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
-+	ltq_w32(0x00, LQ_GPTU_IRNEN);
-+	ltq_w32(0xfff, LQ_GPTU_IRNCR);
-+
-+	/*  Set divider as 0, enable write protection for SPEN, disable module. */
-+	*LQ_GPTU_CLC =
-+		GPTU_CLC_SMC_SET(0x00) |
-+		GPTU_CLC_RMC_SET(0x00) |
-+		GPTU_CLC_FSOE_SET(0) |
-+		GPTU_CLC_SBWE_SET(0) |
-+		GPTU_CLC_EDIS_SET(0) |
-+		GPTU_CLC_SPEN_SET(0) |
-+		GPTU_CLC_DISR_SET(1);
-+
-+	clk_enable(clk);
-+}
-+
-+int lq_request_timer(unsigned int timer, unsigned int flag,
-+	unsigned long value, unsigned long arg1, unsigned long arg2)
-+{
-+	int ret = 0;
-+	unsigned int con_reg, irnen_reg;
-+	int n, X;
-+
-+	if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
-+		timer, flag, value);
-+
-+	if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
-+		value &= 0xFFFF;
-+	else
-+		timer &= ~0x01;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	/*
-+	 *  Allocate timer.
-+	 */
-+	if (timer < FIRST_TIMER) {
-+		unsigned int mask;
-+		unsigned int shift;
-+		/* This takes care of TIMER1B which is the only choice for Voice TAPI system */
-+		unsigned int offset = TIMER2A;
-+
-+		/*
-+		 *  Pick up a free timer.
-+		 */
-+		if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
-+			mask = 1 << offset;
-+			shift = 1;
-+		} else {
-+			mask = 3 << offset;
-+			shift = 2;
-+		}
-+		for (timer = offset;
-+		     timer < offset + timer_dev.number_of_timers;
-+		     timer += shift, mask <<= shift)
-+			if (!(timer_dev.occupation & mask)) {
-+				timer_dev.occupation |= mask;
-+				break;
-+			}
-+		if (timer >= offset + timer_dev.number_of_timers) {
-+			printk("failed![%d]\n", __LINE__);
-+			mutex_unlock(&timer_dev.gptu_mutex);
-+			return -EINVAL;
-+		} else
-+			ret = timer;
-+	} else {
-+		register unsigned int mask;
-+
-+		/*
-+		 *  Check if the requested timer is free.
-+		 */
-+		mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+		if ((timer_dev.occupation & mask)) {
-+			printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
-+				__LINE__, mask, timer_dev.occupation);
-+			mutex_unlock(&timer_dev.gptu_mutex);
-+			return -EBUSY;
-+		} else {
-+			timer_dev.occupation |= mask;
-+			ret = 0;
-+		}
-+	}
-+
-+	/*
-+	 *  Prepare control register value.
-+	 */
-+	switch (TIMER_FLAG_MASK_EDGE(flag)) {
-+	default:
-+	case TIMER_FLAG_NONE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x00);
-+		break;
-+	case TIMER_FLAG_RISE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x01);
-+		break;
-+	case TIMER_FLAG_FALL_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x02);
-+		break;
-+	case TIMER_FLAG_ANY_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x03);
-+		break;
-+	}
-+	if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
-+		con_reg |=
-+			TIMER_FLAG_MASK_SRC(flag) ==
-+			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
-+			GPTU_CON_SRC_EXT_SET(0);
-+	else
-+		con_reg |=
-+			TIMER_FLAG_MASK_SRC(flag) ==
-+			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
-+			GPTU_CON_SRC_EG_SET(0);
-+	con_reg |=
-+		TIMER_FLAG_MASK_SYNC(flag) ==
-+		TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
-+		GPTU_CON_SYNC_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_INVERT(flag) ==
-+		TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_SIZE(flag) ==
-+		TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
-+		GPTU_CON_EXT_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_STOP(flag) ==
-+		TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
-+	con_reg |=
-+		TIMER_FLAG_MASK_TYPE(flag) ==
-+		TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
-+		GPTU_CON_CNT_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_DIR(flag) ==
-+		TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-+
-+	/*
-+	 *  Fill up running data.
-+	 */
-+	timer_dev.timer[timer - FIRST_TIMER].flag = flag;
-+	timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
-+	timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
-+
-+	/*
-+	 *  Enable GPTU module.
-+	 */
-+	if (!timer_dev.f_gptu_on) {
-+		lq_enable_gptu();
-+		timer_dev.f_gptu_on = 1;
-+	}
-+
-+	/*
-+	 *  Enable IRQ.
-+	 */
-+	if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
-+		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
-+			timer_dev.timer[timer - FIRST_TIMER].arg1 =
-+				(unsigned long) find_task_by_vpid((int) arg1);
-+
-+		irnen_reg = 1 << (timer - FIRST_TIMER);
-+
-+		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
-+		    || (TIMER_FLAG_MASK_HANDLE(flag) ==
-+			TIMER_FLAG_CALLBACK_IN_IRQ
-+			&& timer_dev.timer[timer - FIRST_TIMER].arg1)) {
-+			enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
-+			timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
-+		}
-+	} else
-+		irnen_reg = 0;
-+
-+	/*
-+	 *  Write config register, reload value and enable interrupt.
-+	 */
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+	*LQ_GPTU_CON(n, X) = con_reg;
-+	*LQ_GPTU_RELOAD(n, X) = value;
-+	/* printk("reload value = %d\n", (u32)value); */
-+	*LQ_GPTU_IRNEN |= irnen_reg;
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+	printk("successful!\n");
-+	return ret;
-+}
-+EXPORT_SYMBOL(lq_request_timer);
-+
-+int lq_free_timer(unsigned int timer)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	if (GPTU_CON_EN(n, X))
-+		*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-+
-+	*LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
-+	*LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
-+
-+	if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
-+		disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
-+		timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
-+	}
-+
-+	timer_dev.occupation &= ~mask;
-+	if (!timer_dev.occupation && timer_dev.f_gptu_on) {
-+		lq_disable_gptu();
-+		timer_dev.f_gptu_on = 0;
-+	}
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_free_timer);
-+
-+int lq_start_timer(unsigned int timer, int is_resume)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) ==
-+	TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
-+
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_start_timer);
-+
-+int lq_stop_timer(unsigned int timer)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER
-+	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_stop_timer);
-+
-+int lq_reset_counter_flags(u32 timer, u32 flags)
-+{
-+	unsigned int oflag;
-+	unsigned int mask, con_reg;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	switch (TIMER_FLAG_MASK_EDGE(flags)) {
-+	default:
-+	case TIMER_FLAG_NONE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x00);
-+		break;
-+	case TIMER_FLAG_RISE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x01);
-+		break;
-+	case TIMER_FLAG_FALL_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x02);
-+		break;
-+	case TIMER_FLAG_ANY_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x03);
-+		break;
-+	}
-+	if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
-+		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
-+	else
-+		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
-+	con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
-+	con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-+
-+	timer_dev.timer[timer - FIRST_TIMER].flag = flags;
-+	if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
-+		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*LQ_GPTU_CON(n, X) = con_reg;
-+	smp_wmb();
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_reset_counter_flags);
-+
-+int lq_get_count_value(unsigned int timer, unsigned long *value)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER
-+	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*value = *LQ_GPTU_COUNT(n, X);
-+
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_get_count_value);
-+
-+u32 lq_cal_divider(unsigned long freq)
-+{
-+	u64 module_freq, fpi = ltq_get_fpi_bus_clock(2);
-+	u32 clock_divider = 1;
-+	module_freq = fpi * 1000;
-+	do_div(module_freq, clock_divider * freq);
-+	return module_freq;
-+}
-+EXPORT_SYMBOL(lq_cal_divider);
-+
-+int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
-+	int is_ext_src, unsigned int handle_flag, unsigned long arg1,
-+	unsigned long arg2)
-+{
-+	unsigned long divider;
-+	unsigned int flag;
-+
-+	divider = lq_cal_divider(freq);
-+	if (divider == 0)
-+		return -EINVAL;
-+	flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
-+		| (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
-+		| (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
-+		| TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
-+		| TIMER_FLAG_MASK_HANDLE(handle_flag);
-+
-+	printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
-+		timer, freq, divider);
-+	return lq_request_timer(timer, flag, divider, arg1, arg2);
-+}
-+EXPORT_SYMBOL(lq_set_timer);
-+
-+int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
-+	unsigned long arg1, unsigned long arg2)
-+{
-+	printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
-+	return lq_request_timer(timer, flag, reload, arg1, arg2);
-+}
-+EXPORT_SYMBOL(lq_set_counter);
-+
-+static long gptu_ioctl(struct file *file, unsigned int cmd,
-+	unsigned long arg)
-+{
-+	int ret;
-+	struct gptu_ioctl_param param;
-+
-+	if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
-+		return -EFAULT;
-+	copy_from_user(&param, (void *) arg, sizeof(param));
-+
-+	if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
-+	       || GPTU_SET_COUNTER) && param.timer < 2)
-+	     || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
-+	    && !access_ok(VERIFY_WRITE, arg,
-+			   sizeof(struct gptu_ioctl_param)))
-+		return -EFAULT;
-+
-+	switch (cmd) {
-+	case GPTU_REQUEST_TIMER:
-+		ret = lq_request_timer(param.timer, param.flag, param.value,
-+				     (unsigned long) param.pid,
-+				     (unsigned long) param.sig);
-+		if (ret > 0) {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      timer, &ret, sizeof(&ret));
-+			ret = 0;
-+		}
-+		break;
-+	case GPTU_FREE_TIMER:
-+		ret = lq_free_timer(param.timer);
-+		break;
-+	case GPTU_START_TIMER:
-+		ret = lq_start_timer(param.timer, param.flag);
-+		break;
-+	case GPTU_STOP_TIMER:
-+		ret = lq_stop_timer(param.timer);
-+		break;
-+	case GPTU_GET_COUNT_VALUE:
-+		ret = lq_get_count_value(param.timer, &param.value);
-+		if (!ret)
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      value, &param.value,
-+				      sizeof(param.value));
-+		break;
-+	case GPTU_CALCULATE_DIVIDER:
-+		param.value = lq_cal_divider(param.value);
-+		if (param.value == 0)
-+			ret = -EINVAL;
-+		else {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      value, &param.value,
-+				      sizeof(param.value));
-+			ret = 0;
-+		}
-+		break;
-+	case GPTU_SET_TIMER:
-+		ret = lq_set_timer(param.timer, param.value,
-+				 TIMER_FLAG_MASK_STOP(param.flag) !=
-+				 TIMER_FLAG_ONCE ? 1 : 0,
-+				 TIMER_FLAG_MASK_SRC(param.flag) ==
-+				 TIMER_FLAG_EXT_SRC ? 1 : 0,
-+				 TIMER_FLAG_MASK_HANDLE(param.flag) ==
-+				 TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
-+				 TIMER_FLAG_NO_HANDLE,
-+				 (unsigned long) param.pid,
-+				 (unsigned long) param.sig);
-+		if (ret > 0) {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      timer, &ret, sizeof(&ret));
-+			ret = 0;
-+		}
-+		break;
-+	case GPTU_SET_COUNTER:
-+		lq_set_counter(param.timer, param.flag, param.value, 0, 0);
-+		if (ret > 0) {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      timer, &ret, sizeof(&ret));
-+			ret = 0;
-+		}
-+		break;
-+	default:
-+		ret = -ENOTTY;
-+	}
-+
-+	return ret;
-+}
-+
-+static int gptu_open(struct inode *inode, struct file *file)
-+{
-+	return 0;
-+}
-+
-+static int gptu_release(struct inode *inode, struct file *file)
-+{
-+	return 0;
-+}
-+
-+int __init lq_gptu_init(void)
-+{
-+	int ret;
-+	unsigned int i;
-+
-+	ltq_w32(0, LQ_GPTU_IRNEN);
-+	ltq_w32(0xfff, LQ_GPTU_IRNCR);
-+
-+	memset(&timer_dev, 0, sizeof(timer_dev));
-+	mutex_init(&timer_dev.gptu_mutex);
-+
-+	lq_enable_gptu();
-+	timer_dev.number_of_timers = GPTU_ID_CFG * 2;
-+	lq_disable_gptu();
-+	if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
-+		timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
-+	printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
-+
-+	ret = misc_register(&gptu_miscdev);
-+	if (ret) {
-+		printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
-+		return ret;
-+	} else {
-+		printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
-+	}
-+
-+	for (i = 0; i < timer_dev.number_of_timers; i++) {
-+		ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
-+		if (ret) {
-+			for (; i >= 0; i--)
-+				free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
-+			misc_deregister(&gptu_miscdev);
-+			printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
-+			return ret;
-+		} else {
-+			timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
-+			disable_irq(timer_dev.timer[i].irq);
-+			printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+void __exit lq_gptu_exit(void)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < timer_dev.number_of_timers; i++) {
-+		if (timer_dev.timer[i].f_irq_on)
-+			disable_irq(timer_dev.timer[i].irq);
-+		free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
-+	}
-+	lq_disable_gptu();
-+	misc_deregister(&gptu_miscdev);
-+}
-+
-+module_init(lq_gptu_init);
-+module_exit(lq_gptu_exit);
-+
-+#endif
diff --git a/target/linux/lantiq/patches-3.18/0009-MIPS-lantiq-command-line-work-around.patch b/target/linux/lantiq/patches-3.18/0009-MIPS-lantiq-command-line-work-around.patch
deleted file mode 100644
index 88bcbc4b5c..0000000000
--- a/target/linux/lantiq/patches-3.18/0009-MIPS-lantiq-command-line-work-around.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From ed348924cd59ef0c8a4bc4e015e2b7e581a00fa8 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 21:40:41 +0200
-Subject: [PATCH 09/36] MIPS: lantiq: command line work around
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/prom.c |    2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/lantiq/prom.c
-+++ b/arch/mips/lantiq/prom.c
-@@ -74,6 +74,8 @@ void __init plat_mem_setup(void)
- 	 * parsed resulting in our memory appearing
- 	 */
- 	__dt_setup_arch(&__image_dtb);
-+
-+	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- }
- 
- void __init device_tree_init(void)
diff --git a/target/linux/lantiq/patches-3.18/0010-MIPS-lantiq-export-soc-type.patch b/target/linux/lantiq/patches-3.18/0010-MIPS-lantiq-export-soc-type.patch
deleted file mode 100644
index f4cfacf4e9..0000000000
--- a/target/linux/lantiq/patches-3.18/0010-MIPS-lantiq-export-soc-type.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 6804142b47f2634b0657e4dfcec7a34e982b6ddb Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 10 Sep 2014 22:29:21 +0200
-Subject: [PATCH 10/36] MIPS: lantiq: export soc type
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
----
- arch/mips/include/asm/mach-lantiq/lantiq.h |    2 ++
- arch/mips/lantiq/prom.c                    |    5 +++++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/include/asm/mach-lantiq/lantiq.h
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
-@@ -48,6 +48,8 @@ extern struct clk *clk_get_ppe(void);
- extern unsigned char ltq_boot_select(void);
- /* find out what caused the last cpu reset */
- extern int ltq_reset_cause(void);
-+/* find out the soc type */
-+extern int ltq_soc_type(void);
- 
- #define IOPORT_RESOURCE_START	0x10000000
- #define IOPORT_RESOURCE_END	0xffffffff
---- a/arch/mips/lantiq/prom.c
-+++ b/arch/mips/lantiq/prom.c
-@@ -36,6 +36,11 @@ const char *get_system_type(void)
- 	return soc_info.sys_type;
- }
- 
-+int ltq_soc_type(void)
-+{
-+	return soc_info.type;
-+}
-+
- void prom_free_prom_memory(void)
- {
- }
diff --git a/target/linux/lantiq/patches-3.18/0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch b/target/linux/lantiq/patches-3.18/0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch
deleted file mode 100644
index 7a0e1c3e91..0000000000
--- a/target/linux/lantiq/patches-3.18/0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 85f0df34dee96048515ef1e01d88524bd579f8e0 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 10 Sep 2014 22:39:19 +0200
-Subject: [PATCH 11/36] lantiq: add support for xrx200 firmware depending on
- soc type
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
----
- arch/mips/lantiq/xway/xrx200_phy_fw.c |   18 +++++++++++++++++-
- 1 file changed, 17 insertions(+), 1 deletion(-)
-
---- a/arch/mips/lantiq/xway/xrx200_phy_fw.c
-+++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c
-@@ -24,7 +24,23 @@ static dma_addr_t xway_gphy_load(struct
- 	void *fw_addr;
- 	size_t size;
- 
--	if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) {
-+	if (of_get_property(pdev->dev.of_node, "firmware1", NULL) || of_get_property(pdev->dev.of_node, "firmware2", NULL)) {
-+		switch(ltq_soc_type()) {
-+			case SOC_TYPE_VR9:
-+				if (of_property_read_string(pdev->dev.of_node, "firmware1", &fw_name)) {
-+					dev_err(&pdev->dev, "failed to load firmware filename\n");
-+					return 0;
-+				}
-+				break;
-+			case SOC_TYPE_VR9_2:
-+				if (of_property_read_string(pdev->dev.of_node, "firmware2", &fw_name)) {
-+					dev_err(&pdev->dev, "failed to load firmware filename\n");
-+					return 0;
-+				}
-+				break;
-+		}
-+	}
-+	else if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) {
- 		dev_err(&pdev->dev, "failed to load firmware filename\n");
- 		return 0;
- 	}
diff --git a/target/linux/lantiq/patches-3.18/0012-pinctrl-lantiq-fix-up-pinmux.patch b/target/linux/lantiq/patches-3.18/0012-pinctrl-lantiq-fix-up-pinmux.patch
deleted file mode 100644
index ecd143f91f..0000000000
--- a/target/linux/lantiq/patches-3.18/0012-pinctrl-lantiq-fix-up-pinmux.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 25494c55a4007a1409f53ddbafd661636e47ea34 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 20:38:15 +0200
-Subject: [PATCH 12/36] pinctrl/lantiq: fix up pinmux
-
-We found out how to set the gphy led pinmuxing.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-xway.c |   28 ++++++++++++++++++++++++++--
- 1 file changed, 26 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -609,10 +609,9 @@ static struct pinctrl_desc xway_pctrl_de
- 	.confops	= &xway_pinconf_ops,
- };
- 
--static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
-+static int mux_apply(struct ltq_pinmux_info *info,
- 				int pin, int mux)
- {
--	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
- 	int port = PORT(pin);
- 	u32 alt1_reg = GPIO_ALT1(pin);
- 
-@@ -632,6 +631,14 @@ static inline int xway_mux_apply(struct
- 	return 0;
- }
- 
-+static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
-+				int pin, int mux)
-+{
-+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
-+
-+	return mux_apply(info, pin, mux);
-+}
-+
- static const struct ltq_cfg_param xway_cfg_params[] = {
- 	{"lantiq,pull",		LTQ_PINCONF_PARAM_PULL},
- 	{"lantiq,open-drain",	LTQ_PINCONF_PARAM_OPEN_DRAIN},
-@@ -676,6 +683,10 @@ static int xway_gpio_dir_out(struct gpio
- {
- 	struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
- 
-+	if (PORT(pin) == PORT3)
-+		gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin));
-+	else
-+		gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin));
- 	gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
- 	xway_gpio_set(chip, pin, val);
- 
-@@ -696,6 +707,18 @@ static void xway_gpio_free(struct gpio_c
- 	pinctrl_free_gpio(gpio);
- }
- 
-+static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-+{
-+	struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
-+	int i;
-+
-+	for (i = 0; i < info->num_exin; i++)
-+		if (info->exin[i] == offset)
-+			return ltq_eiu_get_irq(i);
-+
-+	return -1;
-+}
-+
- static struct gpio_chip xway_chip = {
- 	.label = "gpio-xway",
- 	.direction_input = xway_gpio_dir_in,
-@@ -704,6 +727,7 @@ static struct gpio_chip xway_chip = {
- 	.set = xway_gpio_set,
- 	.request = xway_gpio_req,
- 	.free = xway_gpio_free,
-+	.to_irq = xway_gpio_to_irq,
- 	.base = -1,
- };
- 
diff --git a/target/linux/lantiq/patches-3.18/0013-MTD-lantiq-xway-fix-invalid-operator.patch b/target/linux/lantiq/patches-3.18/0013-MTD-lantiq-xway-fix-invalid-operator.patch
deleted file mode 100644
index c6d3819c2f..0000000000
--- a/target/linux/lantiq/patches-3.18/0013-MTD-lantiq-xway-fix-invalid-operator.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 8e34da603f442624bb70e887d8f42064bb924224 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 18:03:54 +0200
-Subject: [PATCH 13/36] MTD: lantiq: xway: fix invalid operator
-
-xway_read_byte should use a logic or and not an add operator when working out
-the nand address.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -124,7 +124,7 @@ static unsigned char xway_read_byte(stru
- 	int ret;
- 
- 	spin_lock_irqsave(&ebu_lock, flags);
--	ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
-+	ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
- 	spin_unlock_irqrestore(&ebu_lock, flags);
- 
- 	return ret;
diff --git a/target/linux/lantiq/patches-3.18/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch b/target/linux/lantiq/patches-3.18/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
deleted file mode 100644
index 6a7785b016..0000000000
--- a/target/linux/lantiq/patches-3.18/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From b454cefd675fc1bd3d8c690c1bd1d8f4678e9922 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 18:06:39 +0200
-Subject: [PATCH 14/36] MTD: lantiq: xway: the latched command should be
- persistent
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c |   12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -54,6 +54,8 @@
- #define NAND_CON_CSMUX		(1 << 1)
- #define NAND_CON_NANDM		1
- 
-+static u32 xway_latchcmd;
-+
- static void xway_reset_chip(struct nand_chip *chip)
- {
- 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
-@@ -94,17 +96,15 @@ static void xway_cmd_ctrl(struct mtd_inf
- 	unsigned long flags;
- 
- 	if (ctrl & NAND_CTRL_CHANGE) {
--		nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
- 		if (ctrl & NAND_CLE)
--			nandaddr |= NAND_WRITE_CMD;
--		else
--			nandaddr |= NAND_WRITE_ADDR;
--		this->IO_ADDR_W = (void __iomem *) nandaddr;
-+			xway_latchcmd = NAND_WRITE_CMD;
-+		else if (ctrl & NAND_ALE)
-+			xway_latchcmd = NAND_WRITE_ADDR;
- 	}
- 
- 	if (cmd != NAND_CMD_NONE) {
- 		spin_lock_irqsave(&ebu_lock, flags);
--		writeb(cmd, this->IO_ADDR_W);
-+		writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd));
- 		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- 			;
- 		spin_unlock_irqrestore(&ebu_lock, flags);
diff --git a/target/linux/lantiq/patches-3.18/0015-MTD-lantiq-xway-remove-endless-loop.patch b/target/linux/lantiq/patches-3.18/0015-MTD-lantiq-xway-remove-endless-loop.patch
deleted file mode 100644
index 4bd166863b..0000000000
--- a/target/linux/lantiq/patches-3.18/0015-MTD-lantiq-xway-remove-endless-loop.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 76e153079f02d26e3357302d2886a0c8aaaec64d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 18:02:06 +0200
-Subject: [PATCH 15/36] MTD: lantiq: xway: remove endless loop
-
-The reset loop logic could run into a endless loop. Lets fix it as requested.
-
---> http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c |   10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -59,16 +59,22 @@ static u32 xway_latchcmd;
- static void xway_reset_chip(struct nand_chip *chip)
- {
- 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
-+	unsigned long timeout;
- 	unsigned long flags;
- 
- 	nandaddr &= ~NAND_WRITE_ADDR;
- 	nandaddr |= NAND_WRITE_CMD;
- 
- 	/* finish with a reset */
-+	timeout = jiffies + msecs_to_jiffies(20);
-+
- 	spin_lock_irqsave(&ebu_lock, flags);
- 	writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
--	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
--		;
-+	do {
-+		if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-+			break;
-+		cond_resched();
-+	} while (!time_after_eq(jiffies, timeout));
- 	spin_unlock_irqrestore(&ebu_lock, flags);
- }
- 
diff --git a/target/linux/lantiq/patches-3.18/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch b/target/linux/lantiq/patches-3.18/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
deleted file mode 100644
index f20878cd25..0000000000
--- a/target/linux/lantiq/patches-3.18/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 65df9d63eaee02c25e879b33dd42aceb78e57842 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 17:59:51 +0200
-Subject: [PATCH 16/36] MTD: lantiq: xway: add missing write_buf and read_buf
- to nand driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c |   28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -136,6 +136,32 @@ static unsigned char xway_read_byte(stru
- 	return ret;
- }
- 
-+static void xway_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
-+	unsigned long flags;
-+	int i;
-+
-+	spin_lock_irqsave(&ebu_lock, flags);
-+	for (i = 0; i < len; i++)
-+		buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
-+	spin_unlock_irqrestore(&ebu_lock, flags);
-+}
-+
-+static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-+	unsigned long flags;
-+	int i;
-+
-+	spin_lock_irqsave(&ebu_lock, flags);
-+	for (i = 0; i < len; i++)
-+		ltq_w8(buf[i], (void __iomem *)(nandaddr | NAND_WRITE_DATA));
-+	spin_unlock_irqrestore(&ebu_lock, flags);
-+}
-+
- static int xway_nand_probe(struct platform_device *pdev)
- {
- 	struct nand_chip *this = platform_get_drvdata(pdev);
-@@ -181,6 +207,8 @@ static struct platform_nand_data xway_na
- 		.dev_ready	= xway_dev_ready,
- 		.select_chip	= xway_select_chip,
- 		.read_byte	= xway_read_byte,
-+		.read_buf	= xway_read_buf,
-+		.write_buf	= xway_write_buf,
- 	}
- };
- 
diff --git a/target/linux/lantiq/patches-3.18/0017-MTD-xway-fix-nand-locking.patch b/target/linux/lantiq/patches-3.18/0017-MTD-xway-fix-nand-locking.patch
deleted file mode 100644
index 737469aab5..0000000000
--- a/target/linux/lantiq/patches-3.18/0017-MTD-xway-fix-nand-locking.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From aa705c1b0860da91f2ed1a4c0b57337e6de689e1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:55:31 +0200
-Subject: [PATCH 17/36] MTD: xway: fix nand locking
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c |   15 +++------------
- 1 file changed, 3 insertions(+), 12 deletions(-)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -80,13 +80,16 @@ static void xway_reset_chip(struct nand_
- 
- static void xway_select_chip(struct mtd_info *mtd, int chip)
- {
-+	static unsigned long csflags;
- 
- 	switch (chip) {
- 	case -1:
- 		ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
- 		ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
-+		spin_unlock_irqrestore(&ebu_lock, csflags);
- 		break;
- 	case 0:
-+		spin_lock_irqsave(&ebu_lock, csflags);
- 		ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
- 		ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
- 		break;
-@@ -99,7 +102,6 @@ static void xway_cmd_ctrl(struct mtd_inf
- {
- 	struct nand_chip *this = mtd->priv;
- 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
--	unsigned long flags;
- 
- 	if (ctrl & NAND_CTRL_CHANGE) {
- 		if (ctrl & NAND_CLE)
-@@ -109,11 +111,9 @@ static void xway_cmd_ctrl(struct mtd_inf
- 	}
- 
- 	if (cmd != NAND_CMD_NONE) {
--		spin_lock_irqsave(&ebu_lock, flags);
- 		writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd));
- 		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- 			;
--		spin_unlock_irqrestore(&ebu_lock, flags);
- 	}
- }
- 
-@@ -126,12 +126,9 @@ static unsigned char xway_read_byte(stru
- {
- 	struct nand_chip *this = mtd->priv;
- 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
--	unsigned long flags;
- 	int ret;
- 
--	spin_lock_irqsave(&ebu_lock, flags);
- 	ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
--	spin_unlock_irqrestore(&ebu_lock, flags);
- 
- 	return ret;
- }
-@@ -140,26 +137,20 @@ static void xway_read_buf(struct mtd_inf
- {
- 	struct nand_chip *this = mtd->priv;
- 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
--	unsigned long flags;
- 	int i;
- 
--	spin_lock_irqsave(&ebu_lock, flags);
- 	for (i = 0; i < len; i++)
- 		buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
--	spin_unlock_irqrestore(&ebu_lock, flags);
- }
- 
- static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
- {
- 	struct nand_chip *this = mtd->priv;
- 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
--	unsigned long flags;
- 	int i;
- 
--	spin_lock_irqsave(&ebu_lock, flags);
- 	for (i = 0; i < len; i++)
- 		ltq_w8(buf[i], (void __iomem *)(nandaddr | NAND_WRITE_DATA));
--	spin_unlock_irqrestore(&ebu_lock, flags);
- }
- 
- static int xway_nand_probe(struct platform_device *pdev)
diff --git a/target/linux/lantiq/patches-3.18/0018-MTD-nand-lots-of-xrx200-fixes.patch b/target/linux/lantiq/patches-3.18/0018-MTD-nand-lots-of-xrx200-fixes.patch
deleted file mode 100644
index 5500861c22..0000000000
--- a/target/linux/lantiq/patches-3.18/0018-MTD-nand-lots-of-xrx200-fixes.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From 997a8965db8417266bea3fbdcfa3e5655a1b52fa Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 9 Sep 2014 23:12:15 +0200
-Subject: [PATCH 18/36] MTD: nand: lots of xrx200 fixes
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c |   63 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 63 insertions(+)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -54,8 +54,27 @@
- #define NAND_CON_CSMUX		(1 << 1)
- #define NAND_CON_NANDM		1
- 
-+#define DANUBE_PCI_REG32( addr )    (*(volatile u32 *)(addr))
-+#define PCI_CR_PR_OFFSET	    (KSEG1+0x1E105400)
-+#define PCI_CR_PC_ARB		    (PCI_CR_PR_OFFSET + 0x0080)
-+
- static u32 xway_latchcmd;
- 
-+/*
-+ * req_mask provides a mechanism to prevent interference between
-+ * nand and pci (probably only relevant for the BT Home Hub 2B).
-+ * Setting it causes the corresponding pci req pins to be masked
-+ * during nand access, and also moves ebu locking from the read/write
-+ * functions to the chip select function to ensure that the whole
-+ * operation runs with interrupts disabled.
-+ * In addition it switches on some extra waiting in xway_cmd_ctrl().
-+ * This seems to be necessary if the ebu_cs1 pin has open-drain disabled,
-+ * which in turn seems to be necessary for the nor chip to be recognised
-+ * reliably, on a board (Home Hub 2B again) which has both nor and nand.
-+ */
-+
-+static __be32 req_mask = 0;
-+
- static void xway_reset_chip(struct nand_chip *chip)
- {
- 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
-@@ -86,12 +105,24 @@ static void xway_select_chip(struct mtd_
- 	case -1:
- 		ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
- 		ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
-+
-+		if (req_mask) {
-+			/* Unmask all external PCI request */
-+			DANUBE_PCI_REG32(PCI_CR_PC_ARB) &= ~(req_mask << 16);
-+		}
- 		spin_unlock_irqrestore(&ebu_lock, csflags);
-+
- 		break;
- 	case 0:
- 		spin_lock_irqsave(&ebu_lock, csflags);
-+		if (req_mask) {
-+			/* Mask all external PCI request */
-+			DANUBE_PCI_REG32(PCI_CR_PC_ARB) |= (req_mask << 16);
-+		}
-+
- 		ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
- 		ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
-+
- 		break;
- 	default:
- 		BUG();
-@@ -103,6 +134,12 @@ static void xway_cmd_ctrl(struct mtd_inf
- 	struct nand_chip *this = mtd->priv;
- 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
- 
-+	if (req_mask) {
-+		if (cmd != NAND_CMD_STATUS)
-+			ltq_ebu_w32(EBU_NAND_WAIT, 0); /* Clear nand ready */
-+	}
-+
-+
- 	if (ctrl & NAND_CTRL_CHANGE) {
- 		if (ctrl & NAND_CLE)
- 			xway_latchcmd = NAND_WRITE_CMD;
-@@ -115,6 +152,24 @@ static void xway_cmd_ctrl(struct mtd_inf
- 		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- 			;
- 	}
-+
-+	if (req_mask) {
-+	       /*
-+		* program and erase have their own busy handlers
-+		* status and sequential in needs no delay
-+		*/
-+		switch (cmd) {
-+			case NAND_CMD_ERASE1:
-+			case NAND_CMD_SEQIN:
-+			case NAND_CMD_STATUS:
-+			case NAND_CMD_READID:
-+			return;
-+		}
-+
-+		/* wait until command is processed */
-+		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0)
-+			;
-+	}
- }
- 
- static int xway_dev_ready(struct mtd_info *mtd)
-@@ -157,6 +212,8 @@ static int xway_nand_probe(struct platfo
- {
- 	struct nand_chip *this = platform_get_drvdata(pdev);
- 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-+	const __be32 *req_mask_ptr = of_get_property(pdev->dev.of_node,
-+					"req-mask", NULL);
- 	const __be32 *cs = of_get_property(pdev->dev.of_node,
- 					"lantiq,cs", NULL);
- 	u32 cs_flag = 0;
-@@ -165,6 +222,12 @@ static int xway_nand_probe(struct platfo
- 	if (cs && (*cs == 1))
- 		cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
- 
-+	/*
-+	 * Load the PCI req lines to mask from the device tree. If the
-+	 * property is not present, setting req_mask to 0 disables masking.
-+	 */
-+	req_mask = (req_mask_ptr ? *req_mask_ptr : 0);
-+
- 	/* setup the EBU to run in NAND mode on our base addr */
- 	ltq_ebu_w32(CPHYSADDR(nandaddr)
- 		| ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
diff --git a/target/linux/lantiq/patches-3.18/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-3.18/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
deleted file mode 100644
index 36a899d4f8..0000000000
--- a/target/linux/lantiq/patches-3.18/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From e3b20f04e9f9cae1babe091fdc1d08d7703ae344 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:18:00 +0200
-Subject: [PATCH 20/36] MTD: lantiq: handle NO_XIP on cfi0001 flash
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/maps/lantiq-flash.c |    6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/maps/lantiq-flash.c
-+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -139,7 +139,11 @@ ltq_mtd_probe(struct platform_device *pd
- 	if (!ltq_mtd->map)
- 		return -ENOMEM;
- 
--	ltq_mtd->map->phys = ltq_mtd->res->start;
-+	if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
-+		ltq_mtd->map->phys = NO_XIP;
-+	else
-+		ltq_mtd->map->phys = ltq_mtd->res->start;
-+	ltq_mtd->res->start;
- 	ltq_mtd->map->size = resource_size(ltq_mtd->res);
- 	ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
- 	if (IS_ERR(ltq_mtd->map->virt))
diff --git a/target/linux/lantiq/patches-3.18/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-3.18/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
deleted file mode 100644
index 203eb9495e..0000000000
--- a/target/linux/lantiq/patches-3.18/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 4400e1f593ea40a51912128adb4f53d59e62cad8 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 10 Sep 2014 22:40:18 +0200
-Subject: [PATCH 22/36] MTD: m25p80: allow loading mtd name from OF
-
-In accordance with the physmap flash we should honour the linux,mtd-name
-property when deciding what name the mtd device has.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/devices/m25p80.c |    6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -19,6 +19,7 @@
- #include <linux/errno.h>
- #include <linux/module.h>
- #include <linux/device.h>
-+#include <linux/of.h>
- 
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-@@ -198,6 +199,10 @@ static int m25p_probe(struct spi_device
- 	enum read_mode mode = SPI_NOR_NORMAL;
- 	char *flash_name = NULL;
- 	int ret;
-+	const char __maybe_unused	*of_mtd_name = NULL;
-+
-+	of_property_read_string(spi->dev.of_node,
-+		"linux,mtd-name", &of_mtd_name);
- 
- 	data = dev_get_platdata(&spi->dev);
- 
-@@ -229,6 +234,8 @@ static int m25p_probe(struct spi_device
- 
- 	if (data && data->name)
- 		flash->mtd.name = data->name;
-+	else if (of_mtd_name)
-+		flash->mtd.name = of_mtd_name;
- 
- 	/* For some (historical?) reason many platforms provide two different
- 	 * names in flash_platform_data: "name" and "type". Quite often name is
diff --git a/target/linux/lantiq/patches-3.18/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-3.18/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
deleted file mode 100755
index 55db4c7505..0000000000
--- a/target/linux/lantiq/patches-3.18/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
+++ /dev/null
@@ -1,537 +0,0 @@
-From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:15:36 +0200
-Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/Kconfig  |    5 +
- drivers/net/phy/Makefile |    1 +
- drivers/net/phy/lantiq.c |  231 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 237 insertions(+)
- create mode 100644 drivers/net/phy/lantiq.c
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -164,6 +164,11 @@ config RTL8306_PHY
- 	tristate "Driver for Realtek RTL8306S switches"
- 	select SWCONFIG
- 
-+config LANTIQ_PHY
-+	tristate "Driver for Lantiq PHYs"
-+	---help---
-+	  Supports the 11G and 22E PHYs.
-+
- config FIXED_PHY
- 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- 	depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_NATIONAL_PHY)	+= national.o
- obj-$(CONFIG_DP83640_PHY)	+= dp83640.o
- obj-$(CONFIG_STE10XP)		+= ste10Xp.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
-+obj-$(CONFIG_LANTIQ_PHY)        += lantiq.o
- obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
- obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
- obj-$(CONFIG_AT803X_PHY)	+= at803x.o
---- /dev/null
-+++ b/drivers/net/phy/lantiq.c
-@@ -0,0 +1,278 @@
-+/*
-+ *   This program is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; either version 2 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ *   Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+#include <linux/of.h>
-+
-+#define MII_MMDCTRL		0x0d
-+#define MII_MMDDATA		0x0e
-+
-+#define MII_VR9_11G_IMASK	0x19	/* interrupt mask */
-+#define MII_VR9_11G_ISTAT	0x1a	/* interrupt status */
-+
-+#define INT_VR9_11G_WOL		BIT(15)	/* Wake-On-LAN */
-+#define INT_VR9_11G_ANE		BIT(11)	/* Auto-Neg error */
-+#define INT_VR9_11G_ANC		BIT(10)	/* Auto-Neg complete */
-+#define INT_VR9_11G_ADSC	BIT(5)	/* Link auto-downspeed detect */
-+#define INT_VR9_11G_DXMC	BIT(2)	/* Duplex mode change */
-+#define INT_VR9_11G_LSPC	BIT(1)	/* Link speed change */
-+#define INT_VR9_11G_LSTC	BIT(0)	/* Link state change */
-+#define INT_VR9_11G_MASK	(INT_VR9_11G_LSTC | INT_VR9_11G_ADSC)
-+
-+#define ADVERTISED_MPD		BIT(10)	/* Multi-port device */
-+
-+#define MMD_DEVAD		0x1f
-+#define MMD_ACTYPE_SHIFT	14
-+#define MMD_ACTYPE_ADDRESS	(0 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA		(1 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA_PI	(2 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA_PIWR	(3 << MMD_ACTYPE_SHIFT)
-+
-+static __maybe_unused int vr9_gphy_mmd_read(struct phy_device *phydev,
-+						u16 regnum)
-+{
-+	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
-+	phy_write(phydev, MII_MMDDATA, regnum);
-+	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
-+
-+	return phy_read(phydev, MII_MMDDATA);
-+}
-+
-+static __maybe_unused int vr9_gphy_mmd_write(struct phy_device *phydev,
-+						u16 regnum, u16 val)
-+{
-+	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
-+	phy_write(phydev, MII_MMDDATA, regnum);
-+	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
-+	phy_write(phydev, MII_MMDDATA, val);
-+
-+	return 0;
-+}
-+
-+#if IS_ENABLED(CONFIG_OF_MDIO)
-+static int vr9_gphy_of_reg_init(struct phy_device *phydev)
-+{
-+	u32 tmp;
-+
-+	/* store the led values if one was passed by the devicetree */
-+	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledch", &tmp))
-+		vr9_gphy_mmd_write(phydev, 0x1e0, tmp);
-+
-+	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledcl", &tmp))
-+		vr9_gphy_mmd_write(phydev, 0x1e1, tmp);
-+
-+	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0h", &tmp))
-+		vr9_gphy_mmd_write(phydev, 0x1e2, tmp);
-+
-+	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0l", &tmp))
-+		vr9_gphy_mmd_write(phydev, 0x1e3, tmp);
-+
-+	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1h", &tmp))
-+		vr9_gphy_mmd_write(phydev, 0x1e4, tmp);
-+
-+	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1l", &tmp))
-+		vr9_gphy_mmd_write(phydev, 0x1e5, tmp);
-+	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2h", &tmp))
-+		vr9_gphy_mmd_write(phydev, 0x1e6, tmp);
-+
-+	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2l", &tmp))
-+		vr9_gphy_mmd_write(phydev, 0x1e7, tmp);
-+
-+	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3h", &tmp))
-+		vr9_gphy_mmd_write(phydev, 0x1e8, tmp);
-+
-+	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3l", &tmp))
-+		vr9_gphy_mmd_write(phydev, 0x1e9, tmp);
-+
-+	return 0;
-+}
-+#else
-+static int vr9_gphy_of_reg_init(struct phy_device *phydev)
-+{
-+	return 0;
-+}
-+#endif /* CONFIG_OF_MDIO */
-+
-+static int vr9_gphy_config_init(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	dev_dbg(&phydev->dev, "%s\n", __func__);
-+
-+	/* Mask all interrupts */
-+	err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
-+	if (err)
-+		return err;
-+
-+	/* Clear all pending interrupts */
-+	phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+	vr9_gphy_mmd_write(phydev, 0x1e0, 0xc5);
-+	vr9_gphy_mmd_write(phydev, 0x1e1, 0x67);
-+	vr9_gphy_mmd_write(phydev, 0x1e2, 0x42);
-+	vr9_gphy_mmd_write(phydev, 0x1e3, 0x10);
-+	vr9_gphy_mmd_write(phydev, 0x1e4, 0x70);
-+	vr9_gphy_mmd_write(phydev, 0x1e5, 0x03);
-+	vr9_gphy_mmd_write(phydev, 0x1e6, 0x20);
-+	vr9_gphy_mmd_write(phydev, 0x1e7, 0x00);
-+	vr9_gphy_mmd_write(phydev, 0x1e8, 0x40);
-+	vr9_gphy_mmd_write(phydev, 0x1e9, 0x20);
-+
-+	vr9_gphy_of_reg_init(phydev);
-+
-+	return 0;
-+}
-+
-+static int vr9_gphy_config_aneg(struct phy_device *phydev)
-+{
-+	int reg, err;
-+
-+	/* Advertise as multi-port device */
-+	reg = phy_read(phydev, MII_CTRL1000);
-+	reg |= ADVERTISED_MPD;
-+	err = phy_write(phydev, MII_CTRL1000, reg);
-+	if (err)
-+		return err;
-+
-+	return genphy_config_aneg(phydev);
-+}
-+
-+static int vr9_gphy_ack_interrupt(struct phy_device *phydev)
-+{
-+	int reg;
-+
-+	/*
-+	 * Possible IRQ numbers:
-+	 * - IM3_IRL18 for GPHY0
-+	 * - IM3_IRL17 for GPHY1
-+	 *
-+	 * Due to a silicon bug IRQ lines are not really independent from
-+	 * each other. Sometimes the two lines are driven at the same time
-+	 * if only one GPHY core raises the interrupt.
-+	 */
-+
-+	reg = phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+	return (reg < 0) ? reg : 0;
-+}
-+
-+static int vr9_gphy_did_interrupt(struct phy_device *phydev)
-+{
-+	int reg;
-+
-+	reg = phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+	return reg > 0;
-+}
-+
-+static int vr9_gphy_config_intr(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-+		err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK);
-+	else
-+		err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
-+
-+	return err;
-+}
-+
-+static struct phy_driver lantiq_phy[] = {
-+	{
-+		.phy_id		= 0xd565a400,
-+		.phy_id_mask	= 0xfffffff8,
-+		.name		= "Lantiq XWAY PEF7071",
-+		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
-+		.config_init	= vr9_gphy_config_init,
-+		.config_aneg	= vr9_gphy_config_aneg,
-+		.read_status	= genphy_read_status,
-+		.ack_interrupt	= vr9_gphy_ack_interrupt,
-+		.did_interrupt	= vr9_gphy_did_interrupt,
-+		.config_intr	= vr9_gphy_config_intr,
-+		.driver		= { .owner = THIS_MODULE },
-+	}, {
-+		.phy_id		= 0x030260D0,
-+		.phy_id_mask	= 0xfffffff0,
-+		.name		= "Lantiq XWAY VR9 GPHY 11G v1.3",
-+		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
-+		.config_init	= vr9_gphy_config_init,
-+		.config_aneg	= vr9_gphy_config_aneg,
-+		.read_status	= genphy_read_status,
-+		.ack_interrupt	= vr9_gphy_ack_interrupt,
-+		.did_interrupt	= vr9_gphy_did_interrupt,
-+		.config_intr	= vr9_gphy_config_intr,
-+		.driver		= { .owner = THIS_MODULE },
-+	}, {
-+		.phy_id		= 0xd565a408,
-+		.phy_id_mask	= 0xfffffff8,
-+		.name		= "Lantiq XWAY VR9 GPHY 11G v1.4",
-+		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
-+		.config_init	= vr9_gphy_config_init,
-+		.config_aneg	= vr9_gphy_config_aneg,
-+		.read_status	= genphy_read_status,
-+		.ack_interrupt	= vr9_gphy_ack_interrupt,
-+		.did_interrupt	= vr9_gphy_did_interrupt,
-+		.config_intr	= vr9_gphy_config_intr,
-+		.driver		= { .owner = THIS_MODULE },
-+	}, {
-+		.phy_id		= 0xd565a418,
-+		.phy_id_mask	= 0xfffffff8,
-+		.name		= "Lantiq XWAY XRX PHY22F v1.4",
-+		.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
-+		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
-+		.config_init	= vr9_gphy_config_init,
-+		.config_aneg	= vr9_gphy_config_aneg,
-+		.read_status	= genphy_read_status,
-+		.ack_interrupt	= vr9_gphy_ack_interrupt,
-+		.did_interrupt	= vr9_gphy_did_interrupt,
-+		.config_intr	= vr9_gphy_config_intr,
-+		.driver		= { .owner = THIS_MODULE },
-+	},
-+};
-+
-+static int __init ltq_phy_init(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) {
-+		int err = phy_driver_register(&lantiq_phy[i]);
-+		if (err)
-+			pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name);
-+	}
-+
-+	return 0;
-+}
-+
-+static void __exit ltq_phy_exit(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++)
-+		phy_driver_unregister(&lantiq_phy[i]);
-+}
-+
-+module_init(ltq_phy_init);
-+module_exit(ltq_phy_exit);
-+
-+MODULE_DESCRIPTION("Lantiq PHY drivers");
-+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt
-@@ -0,0 +1,216 @@
-+Lanitq PHY binding
-+============================================
-+
-+This devicetree binding controls the lantiq ethernet phys led functionality.
-+
-+Example:
-+	mdio@0 {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		compatible = "lantiq,xrx200-mdio";
-+			phy5: ethernet-phy@5 {
-+			reg = <0x1>;
-+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-+		};
-+		phy11: ethernet-phy@11 {
-+			reg = <0x11>;
-+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+			lantiq,led2h = <0x00>;
-+			lantiq,led2l = <0x03>;
-+		};
-+		phy12: ethernet-phy@12 {
-+			reg = <0x12>;
-+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+			lantiq,led1h = <0x00>;
-+			lantiq,led1l = <0x03>;
-+		};
-+		phy13: ethernet-phy@13 {
-+			reg = <0x13>;
-+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+			lantiq,led2h = <0x00>;
-+			lantiq,led2l = <0x03>;
-+		};
-+		phy14: ethernet-phy@14 {
-+			reg = <0x14>;
-+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+			lantiq,led1h = <0x00>;
-+			lantiq,led1l = <0x03>;
-+		};
-+	};
-+
-+Register Description
-+============================================
-+
-+LEDCH:
-+
-+Name	Hardware Reset Value
-+LEDCH	0x00C5
-+
-+| 15 |    |    |    |    |    |    |  8 |
-+=========================================
-+|		RES			|
-+=========================================
-+
-+|  7 |    |    |    |    |    |    |  0 |
-+=========================================
-+|   FBF   |   SBF   |RES |     NACS     |
-+=========================================
-+
-+Field	Bits	Type	Description
-+FBC	7:6	RW	Fast Blink Frequency
-+			---
-+			0x0 (00b) F02HZ 2 Hz blinking frequency
-+			0x1 (01b) F04HZ 4 Hz blinking frequency
-+			0x2 (10b) F08HZ 8 Hz blinking frequency
-+			0x3 (11b) F16HZ 16 Hz blinking frequency
-+
-+SBF	5:4	RW	Slow Blink Frequency
-+			---
-+			0x0 (00b) F02HZ 2 Hz blinking frequency
-+			0x1 (01b) F04HZ 4 Hz blinking frequency
-+			0x2 (10b) F08HZ 8 Hz blinking frequency
-+			0x3 (11b) F16HZ 16 Hz blinking frequency
-+
-+NACS	2:0	RW	Inverse of Scan Function
-+			---
-+			0x0 (000b) NONE No Function
-+			0x1 (001b) LINK Complex function enabled when link is up
-+			0x2 (010b) PDOWN Complex function enabled when device is powered-down
-+			0x3 (011b) EEE Complex function enabled when device is in EEE mode
-+			0x4 (100b) ANEG Complex function enabled when auto-negotiation is running
-+			0x5 (101b) ABIST Complex function enabled when analog self-test is running
-+			0x6 (110b) CDIAG Complex function enabled when cable diagnostics are running
-+			0x7 (111b) TEST Complex function enabled when test mode is running
-+
-+LEDCL:
-+
-+Name	Hardware Reset Value
-+LEDCL	0x0067
-+
-+| 15 |    |    |    |    |    |    |  8 |
-+=========================================
-+|		RES			|
-+=========================================
-+
-+|  7 |    |    |    |    |    |    |  0 |
-+=========================================
-+|RES |     SCAN     |RES |    CBLINK    |
-+=========================================
-+
-+Field	Bits	Type	Description
-+SCAN	6:4	RW	Complex Scan Configuration
-+			---
-+			000 B NONE No Function
-+			001 B LINK Complex function enabled when link is up
-+			010 B PDOWN Complex function enabled when device is powered-down
-+			011 B EEE Complex function enabled when device is in EEE mode
-+			100 B ANEG Complex function enabled when auto-negotiation is running
-+			101 B ABIST Complex function enabled when analog self-test is running
-+			110 B CDIAG Complex function enabled when cable diagnostics are running
-+			111 B TEST Complex function enabled when test mode is running
-+
-+CBLINK	2:0	RW	Complex Blinking Configuration
-+			---
-+			000 B NONE No Function
-+			001 B LINK Complex function enabled when link is up
-+			010 B PDOWN Complex function enabled when device is powered-down
-+			011 B EEE Complex function enabled when device is in EEE mode
-+			100 B ANEG Complex function enabled when auto-negotiation is running
-+			101 B ABIST Complex function enabled when analog self-test is running
-+			110 B CDIAG Complex function enabled when cable diagnostics are running
-+			111 B TEST Complex function enabled when test mode is running
-+
-+LEDxH:
-+
-+Name	Hardware Reset Value
-+LED0H	0x0070
-+LED1H	0x0020
-+LED2H	0x0040
-+LED3H	0x0040
-+
-+| 15 |    |    |    |    |    |    |  8 |
-+=========================================
-+|		RES			|
-+=========================================
-+
-+|  7 |    |    |    |    |    |    |  0 |
-+=========================================
-+|        CON        |       BLINKF      |
-+=========================================
-+
-+Field	Bits	Type	Description
-+CON	7:4	RW	Constant On Configuration
-+			---
-+			0x0 (0000b) NONE LED does not light up constantly
-+			0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s
-+			0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s
-+			0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s
-+			0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s
-+			0x5 (0101b) LINK10_0 LED is on when link is 10/1000 Mbit/s
-+			0x6 (0110b) LINK100X LED is on when link is 100/1000 Mbit/s
-+			0x7 (0111b) LINK10XX LED is on when link is 10/100/1000 Mbit/s
-+			0x8 (1000b) PDOWN LED is on when device is powered-down
-+			0x9 (1001b) EEE LED is on when device is in EEE mode
-+			0xA (1010b) ANEG LED is on when auto-negotiation is running
-+			0xB (1011b) ABIST LED is on when analog self-test is running
-+			0xC (1100b) CDIAG LED is on when cable diagnostics are running
-+
-+BLINKF	3:0	RW	Fast Blinking Configuration
-+			---
-+			0x0 (0000b) NONE No Blinking
-+			0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
-+			0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
-+			0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
-+			0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
-+			0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
-+			0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
-+			0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
-+			0x8 (1000b) PDOWN Blink when device is powered-down
-+			0x9 (1001b) EEE Blink when device is in EEE mode
-+			0xA (1010b) ANEG Blink when auto-negotiation is running
-+			0xB (1011b) ABIST Blink when analog self-test is running
-+			0xC (1100b) CDIAG Blink when cable diagnostics are running
-+
-+LEDxL:
-+
-+Name	Hardware Reset Value
-+LED0L	0x0003
-+LED1L	0x0000
-+LED2L	0x0000
-+LED3L	0x0020
-+
-+| 15 |    |    |    |    |    |    |  8 |
-+=========================================
-+|		RES			|
-+=========================================
-+
-+|  7 |    |    |    |    |    |    |  0 |
-+=========================================
-+|      BLINKS       |       PULSE       |
-+=========================================
-+
-+Field	Bits	Type	Description
-+BLINKS	7:4	RW	Slow Blinkin Configuration
-+			---
-+			0x0 (0000b) NONE No Blinking
-+			0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
-+			0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
-+			0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
-+			0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
-+			0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
-+			0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
-+			0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
-+			0x8 (1000b) PDOWN Blink when device is powered-down
-+			0x9 (1001b) EEE Blink when device is in EEE mode
-+			0xA (1010b) ANEG Blink when auto-negotiation is running
-+			0xB (1011b) ABIST Blink when analog self-test is running
-+			0xC (1100b) CDIAG Blink when cable diagnostics are runningning
-+
-+PULSE	3:0	RW	Pulsing Configuration
-+			The pulse field is a mask field by which certain events can be combined
-+			---
-+			0x0 (0000b) NONE No pulsing
-+			0x1 (0001b) TXACT Transmit activity
-+			0x2 (0010b) RXACT Receive activity
-+			0x4 (0100b) COL Collision
-+			0x8 (1000b) RES Reserved
diff --git a/target/linux/lantiq/patches-3.18/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-3.18/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
deleted file mode 100644
index b69b2a900f..0000000000
--- a/target/linux/lantiq/patches-3.18/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
+++ /dev/null
@@ -1,364 +0,0 @@
-From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 09:26:24 +0200
-Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- firmware/Makefile       |    4 +
- firmware/lantiq/COPYING |  286 +++++++++++++++++++++++++++++++++++++++++++++++
- firmware/lantiq/README  |   45 ++++++++
- 3 files changed, 335 insertions(+)
- create mode 100644 firmware/lantiq/COPYING
- create mode 100644 firmware/lantiq/README
-
---- a/firmware/Makefile
-+++ b/firmware/Makefile
-@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P
- fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
- fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
- fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a1x.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a2x.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a1x.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a2x.bin
- fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
- 
- fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
---- /dev/null
-+++ b/firmware/lantiq/COPYING
-@@ -0,0 +1,286 @@
-+All firmware files are copyrighted by Lantiq Deutschland GmbH.
-+The files have been extracted from header files found in Lantiq BSPs.
-+If not stated otherwise all files are licensed under GPL.
-+
-+=======================================================================
-+
-+		    GNU GENERAL PUBLIC LICENSE
-+		       Version 2, June 1991
-+
-+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ Everyone is permitted to copy and distribute verbatim copies
-+ of this license document, but changing it is not allowed.
-+
-+			    Preamble
-+
-+  The licenses for most software are designed to take away your
-+freedom to share and change it.  By contrast, the GNU General Public
-+License is intended to guarantee your freedom to share and change free
-+software--to make sure the software is free for all its users.  This
-+General Public License applies to most of the Free Software
-+Foundation's software and to any other program whose authors commit to
-+using it.  (Some other Free Software Foundation software is covered by
-+the GNU Library General Public License instead.)  You can apply it to
-+your programs, too.
-+
-+  When we speak of free software, we are referring to freedom, not
-+price.  Our General Public Licenses are designed to make sure that you
-+have the freedom to distribute copies of free software (and charge for
-+this service if you wish), that you receive source code or can get it
-+if you want it, that you can change the software or use pieces of it
-+in new free programs; and that you know you can do these things.
-+
-+  To protect your rights, we need to make restrictions that forbid
-+anyone to deny you these rights or to ask you to surrender the rights.
-+These restrictions translate to certain responsibilities for you if you
-+distribute copies of the software, or if you modify it.
-+
-+  For example, if you distribute copies of such a program, whether
-+gratis or for a fee, you must give the recipients all the rights that
-+you have.  You must make sure that they, too, receive or can get the
-+source code.  And you must show them these terms so they know their
-+rights.
-+
-+  We protect your rights with two steps: (1) copyright the software, and
-+(2) offer you this license which gives you legal permission to copy,
-+distribute and/or modify the software.
-+
-+  Also, for each author's protection and ours, we want to make certain
-+that everyone understands that there is no warranty for this free
-+software.  If the software is modified by someone else and passed on, we
-+want its recipients to know that what they have is not the original, so
-+that any problems introduced by others will not reflect on the original
-+authors' reputations.
-+
-+  Finally, any free program is threatened constantly by software
-+patents.  We wish to avoid the danger that redistributors of a free
-+program will individually obtain patent licenses, in effect making the
-+program proprietary.  To prevent this, we have made it clear that any
-+patent must be licensed for everyone's free use or not licensed at all.
-+
-+  The precise terms and conditions for copying, distribution and
-+modification follow.
-+
-+		    GNU GENERAL PUBLIC LICENSE
-+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-+
-+  0. This License applies to any program or other work which contains
-+a notice placed by the copyright holder saying it may be distributed
-+under the terms of this General Public License.  The "Program", below,
-+refers to any such program or work, and a "work based on the Program"
-+means either the Program or any derivative work under copyright law:
-+that is to say, a work containing the Program or a portion of it,
-+either verbatim or with modifications and/or translated into another
-+language.  (Hereinafter, translation is included without limitation in
-+the term "modification".)  Each licensee is addressed as "you".
-+
-+Activities other than copying, distribution and modification are not
-+covered by this License; they are outside its scope.  The act of
-+running the Program is not restricted, and the output from the Program
-+is covered only if its contents constitute a work based on the
-+Program (independent of having been made by running the Program).
-+Whether that is true depends on what the Program does.
-+
-+  1. You may copy and distribute verbatim copies of the Program's
-+source code as you receive it, in any medium, provided that you
-+conspicuously and appropriately publish on each copy an appropriate
-+copyright notice and disclaimer of warranty; keep intact all the
-+notices that refer to this License and to the absence of any warranty;
-+and give any other recipients of the Program a copy of this License
-+along with the Program.
-+
-+You may charge a fee for the physical act of transferring a copy, and
-+you may at your option offer warranty protection in exchange for a fee.
-+
-+  2. You may modify your copy or copies of the Program or any portion
-+of it, thus forming a work based on the Program, and copy and
-+distribute such modifications or work under the terms of Section 1
-+above, provided that you also meet all of these conditions:
-+
-+    a) You must cause the modified files to carry prominent notices
-+    stating that you changed the files and the date of any change.
-+
-+    b) You must cause any work that you distribute or publish, that in
-+    whole or in part contains or is derived from the Program or any
-+    part thereof, to be licensed as a whole at no charge to all third
-+    parties under the terms of this License.
-+
-+    c) If the modified program normally reads commands interactively
-+    when run, you must cause it, when started running for such
-+    interactive use in the most ordinary way, to print or display an
-+    announcement including an appropriate copyright notice and a
-+    notice that there is no warranty (or else, saying that you provide
-+    a warranty) and that users may redistribute the program under
-+    these conditions, and telling the user how to view a copy of this
-+    License.  (Exception: if the Program itself is interactive but
-+    does not normally print such an announcement, your work based on
-+    the Program is not required to print an announcement.)
-+
-+These requirements apply to the modified work as a whole.  If
-+identifiable sections of that work are not derived from the Program,
-+and can be reasonably considered independent and separate works in
-+themselves, then this License, and its terms, do not apply to those
-+sections when you distribute them as separate works.  But when you
-+distribute the same sections as part of a whole which is a work based
-+on the Program, the distribution of the whole must be on the terms of
-+this License, whose permissions for other licensees extend to the
-+entire whole, and thus to each and every part regardless of who wrote it.
-+
-+Thus, it is not the intent of this section to claim rights or contest
-+your rights to work written entirely by you; rather, the intent is to
-+exercise the right to control the distribution of derivative or
-+collective works based on the Program.
-+
-+In addition, mere aggregation of another work not based on the Program
-+with the Program (or with a work based on the Program) on a volume of
-+a storage or distribution medium does not bring the other work under
-+the scope of this License.
-+
-+  3. You may copy and distribute the Program (or a work based on it,
-+under Section 2) in object code or executable form under the terms of
-+Sections 1 and 2 above provided that you also do one of the following:
-+
-+    a) Accompany it with the complete corresponding machine-readable
-+    source code, which must be distributed under the terms of Sections
-+    1 and 2 above on a medium customarily used for software interchange; or,
-+
-+    b) Accompany it with a written offer, valid for at least three
-+    years, to give any third party, for a charge no more than your
-+    cost of physically performing source distribution, a complete
-+    machine-readable copy of the corresponding source code, to be
-+    distributed under the terms of Sections 1 and 2 above on a medium
-+    customarily used for software interchange; or,
-+
-+    c) Accompany it with the information you received as to the offer
-+    to distribute corresponding source code.  (This alternative is
-+    allowed only for noncommercial distribution and only if you
-+    received the program in object code or executable form with such
-+    an offer, in accord with Subsection b above.)
-+
-+The source code for a work means the preferred form of the work for
-+making modifications to it.  For an executable work, complete source
-+code means all the source code for all modules it contains, plus any
-+associated interface definition files, plus the scripts used to
-+control compilation and installation of the executable.  However, as a
-+special exception, the source code distributed need not include
-+anything that is normally distributed (in either source or binary
-+form) with the major components (compiler, kernel, and so on) of the
-+operating system on which the executable runs, unless that component
-+itself accompanies the executable.
-+
-+If distribution of executable or object code is made by offering
-+access to copy from a designated place, then offering equivalent
-+access to copy the source code from the same place counts as
-+distribution of the source code, even though third parties are not
-+compelled to copy the source along with the object code.
-+
-+  4. You may not copy, modify, sublicense, or distribute the Program
-+except as expressly provided under this License.  Any attempt
-+otherwise to copy, modify, sublicense or distribute the Program is
-+void, and will automatically terminate your rights under this License.
-+However, parties who have received copies, or rights, from you under
-+this License will not have their licenses terminated so long as such
-+parties remain in full compliance.
-+
-+  5. You are not required to accept this License, since you have not
-+signed it.  However, nothing else grants you permission to modify or
-+distribute the Program or its derivative works.  These actions are
-+prohibited by law if you do not accept this License.  Therefore, by
-+modifying or distributing the Program (or any work based on the
-+Program), you indicate your acceptance of this License to do so, and
-+all its terms and conditions for copying, distributing or modifying
-+the Program or works based on it.
-+
-+  6. Each time you redistribute the Program (or any work based on the
-+Program), the recipient automatically receives a license from the
-+original licensor to copy, distribute or modify the Program subject to
-+these terms and conditions.  You may not impose any further
-+restrictions on the recipients' exercise of the rights granted herein.
-+You are not responsible for enforcing compliance by third parties to
-+this License.
-+
-+  7. If, as a consequence of a court judgment or allegation of patent
-+infringement or for any other reason (not limited to patent issues),
-+conditions are imposed on you (whether by court order, agreement or
-+otherwise) that contradict the conditions of this License, they do not
-+excuse you from the conditions of this License.  If you cannot
-+distribute so as to satisfy simultaneously your obligations under this
-+License and any other pertinent obligations, then as a consequence you
-+may not distribute the Program at all.  For example, if a patent
-+license would not permit royalty-free redistribution of the Program by
-+all those who receive copies directly or indirectly through you, then
-+the only way you could satisfy both it and this License would be to
-+refrain entirely from distribution of the Program.
-+
-+If any portion of this section is held invalid or unenforceable under
-+any particular circumstance, the balance of the section is intended to
-+apply and the section as a whole is intended to apply in other
-+circumstances.
-+
-+It is not the purpose of this section to induce you to infringe any
-+patents or other property right claims or to contest validity of any
-+such claims; this section has the sole purpose of protecting the
-+integrity of the free software distribution system, which is
-+implemented by public license practices.  Many people have made
-+generous contributions to the wide range of software distributed
-+through that system in reliance on consistent application of that
-+system; it is up to the author/donor to decide if he or she is willing
-+to distribute software through any other system and a licensee cannot
-+impose that choice.
-+
-+This section is intended to make thoroughly clear what is believed to
-+be a consequence of the rest of this License.
-+
-+  8. If the distribution and/or use of the Program is restricted in
-+certain countries either by patents or by copyrighted interfaces, the
-+original copyright holder who places the Program under this License
-+may add an explicit geographical distribution limitation excluding
-+those countries, so that distribution is permitted only in or among
-+countries not thus excluded.  In such case, this License incorporates
-+the limitation as if written in the body of this License.
-+
-+  9. The Free Software Foundation may publish revised and/or new versions
-+of the General Public License from time to time.  Such new versions will
-+be similar in spirit to the present version, but may differ in detail to
-+address new problems or concerns.
-+
-+Each version is given a distinguishing version number.  If the Program
-+specifies a version number of this License which applies to it and "any
-+later version", you have the option of following the terms and conditions
-+either of that version or of any later version published by the Free
-+Software Foundation.  If the Program does not specify a version number of
-+this License, you may choose any version ever published by the Free Software
-+Foundation.
-+
-+  10. If you wish to incorporate parts of the Program into other free
-+programs whose distribution conditions are different, write to the author
-+to ask for permission.  For software which is copyrighted by the Free
-+Software Foundation, write to the Free Software Foundation; we sometimes
-+make exceptions for this.  Our decision will be guided by the two goals
-+of preserving the free status of all derivatives of our free software and
-+of promoting the sharing and reuse of software generally.
-+
-+			    NO WARRANTY
-+
-+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-+REPAIR OR CORRECTION.
-+
-+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-+POSSIBILITY OF SUCH DAMAGES.
-+
-+		     END OF TERMS AND CONDITIONS
---- /dev/null
-+++ b/firmware/lantiq/README
-@@ -0,0 +1,45 @@
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+# (C) Copyright 2007 - 2012
-+# Lantiq Deutschland GmbH
-+#
-+# (C) Copyright 2012
-+# Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+#
-+
-+#
-+# How to use
-+#
-+Configure kernel with:
-+CONFIG_FW_LOADER=y
-+CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR"
-+CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES"
-+
-+where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list
-+of space separated files from list below.
-+
-+#
-+# Firmware files
-+#
-+
-+# GPHY core on Lantiq XWAY VR9 v1.1
-+lantiq/vr9_phy11g_a1x.bin
-+lantiq/vr9_phy22f_a1x.bin
-+
-+# GPHY core on Lantiq XWAY VR9 v1.2
-+lantiq/vr9_phy11g_a2x.bin
-+lantiq/vr9_phy22f_a2x.bin
diff --git a/target/linux/lantiq/patches-3.18/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-3.18/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
deleted file mode 100644
index f2a9d1bbab..0000000000
--- a/target/linux/lantiq/patches-3.18/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
+++ /dev/null
@@ -1,3339 +0,0 @@
-From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 12:22:23 +0200
-Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
-
----
- drivers/net/ethernet/Kconfig            |    8 +-
- drivers/net/ethernet/Makefile           |    1 +
- drivers/net/ethernet/lantiq_pce.h       |  163 +++
- drivers/net/ethernet/lantiq_xrx200.c    | 1798 +++++++++++++++++++++++++++++++
- drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++
- 5 files changed, 3297 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/ethernet/lantiq_pce.h
- create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
- create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h
-
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -101,7 +101,13 @@ config LANTIQ_ETOP
- 	tristate "Lantiq SoC ETOP driver"
- 	depends on SOC_TYPE_XWAY
- 	---help---
--	  Support for the MII0 inside the Lantiq SoC
-+	  Support for the MII0 inside the Lantiq ADSL SoC
-+
-+config LANTIQ_XRX200
-+	tristate "Lantiq SoC XRX200 driver"
-+	depends on SOC_TYPE_XWAY
-+	---help---
-+	  Support for the MII0 inside the Lantiq VDSL SoC
- 
- source "drivers/net/ethernet/marvell/Kconfig"
- source "drivers/net/ethernet/mellanox/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_IP1000) += icplus/
- obj-$(CONFIG_JME) += jme.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-+obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
- obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
- obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
- obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_pce.h
-@@ -0,0 +1,163 @@
-+/*
-+ *   This program is free software; you can redistribute it and/or modify it
-+ *   under the terms of the GNU General Public License version 2 as published
-+ *   by the Free Software Foundation.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ *   Copyright (C) 2010 Lantiq Deutschland GmbH
-+ *   Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ *   PCE microcode extracted from UGW5.2 switch api
-+ */
-+
-+/* Switch API Micro Code V0.3 */
-+enum {
-+	OUT_MAC0 = 0,
-+	OUT_MAC1,
-+	OUT_MAC2,
-+	OUT_MAC3,
-+	OUT_MAC4,
-+	OUT_MAC5,
-+	OUT_ETHTYP,
-+	OUT_VTAG0,
-+	OUT_VTAG1,
-+	OUT_ITAG0,
-+	OUT_ITAG1,	/*10 */
-+	OUT_ITAG2,
-+	OUT_ITAG3,
-+	OUT_IP0,
-+	OUT_IP1,
-+	OUT_IP2,
-+	OUT_IP3,
-+	OUT_SIP0,
-+	OUT_SIP1,
-+	OUT_SIP2,
-+	OUT_SIP3,	/*20*/
-+	OUT_SIP4,
-+	OUT_SIP5,
-+	OUT_SIP6,
-+	OUT_SIP7,
-+	OUT_DIP0,
-+	OUT_DIP1,
-+	OUT_DIP2,
-+	OUT_DIP3,
-+	OUT_DIP4,
-+	OUT_DIP5,	/*30*/
-+	OUT_DIP6,
-+	OUT_DIP7,
-+	OUT_SESID,
-+	OUT_PROT,
-+	OUT_APP0,
-+	OUT_APP1,
-+	OUT_IGMP0,
-+	OUT_IGMP1,
-+	OUT_IPOFF,	/*39*/
-+	OUT_NONE =  63
-+};
-+
-+/* parser's microcode length type */
-+#define INSTR		0
-+#define IPV6		1
-+#define LENACCU		2
-+
-+/* parser's microcode flag type */
-+enum {
-+	FLAG_ITAG =  0,
-+	FLAG_VLAN,
-+	FLAG_SNAP,
-+	FLAG_PPPOE,
-+	FLAG_IPV6,
-+	FLAG_IPV6FL,
-+	FLAG_IPV4,
-+	FLAG_IGMP,
-+	FLAG_TU,
-+	FLAG_HOP,
-+	FLAG_NN1,	/*10 */
-+	FLAG_NN2,
-+	FLAG_END,
-+	FLAG_NO,	/*13*/
-+};
-+
-+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
-+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
-+	{ {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
-+struct pce_microcode {
-+	unsigned short val[4];
-+/*	unsigned short val_2;
-+	unsigned short val_1;
-+	unsigned short val_0;*/
-+} pce_microcode[] = {
-+	/*      value    mask    ns  fields      L  type     flags       ipv4_len */
-+	MC_ENTRY(0x88c3, 0xFFFF,  1, OUT_ITAG0,  4, INSTR,   FLAG_ITAG,  0),
-+	MC_ENTRY(0x8100, 0xFFFF,  2, OUT_VTAG0,  2, INSTR,   FLAG_VLAN,  0),
-+	MC_ENTRY(0x88A8, 0xFFFF,  1, OUT_VTAG0,  2, INSTR,   FLAG_VLAN,  0),
-+	MC_ENTRY(0x8100, 0xFFFF,  1, OUT_VTAG0,  2, INSTR,   FLAG_VLAN,  0),
-+	MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE,   0, INSTR,   FLAG_SNAP,  0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7,   3, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7,   3, INSTR,   FLAG_PPPOE, 0),
-+	MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0,    4, INSTR,   FLAG_IPV4,  1),
-+	MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0,    3, INSTR,   FLAG_IPV6,  0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3,    2, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0,   4, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE,   0, LENACCU, FLAG_NO,    0),
-+	MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3,   17, INSTR,   FLAG_HOP,   0),
-+	MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3,   17, INSTR,   FLAG_NN1,   0),
-+	MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3,   17, INSTR,   FLAG_NN2,   0),
-+	MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE,   0, IPV6,    FLAG_HOP,   0),
-+	MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE,   0, IPV6,    FLAG_NN1,   0),
-+	MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE,   0, IPV6,    FLAG_NN2,   0),
-+	MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT,   1, IPV6,    FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0,  16, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0,   4, INSTR,   FLAG_IGMP,  0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+};
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -0,0 +1,1796 @@
-+/*
-+ *   This program is free software; you can redistribute it and/or modify it
-+ *   under the terms of the GNU General Public License version 2 as published
-+ *   by the Free Software Foundation.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ *   Copyright (C) 2010 Lantiq Deutschland
-+ *   Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/switch.h>
-+#include <linux/etherdevice.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <asm/delay.h>
-+
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_gpio.h>
-+
-+#include <xway_dma.h>
-+#include <lantiq_soc.h>
-+
-+#include "lantiq_pce.h"
-+#include "lantiq_xrx200_sw.h"
-+
-+#define SW_POLLING
-+#define SW_ROUTING
-+#define SW_PORTMAP
-+
-+#ifdef SW_ROUTING
-+  #ifdef SW_PORTMAP
-+#define XRX200_MAX_DEV		2
-+  #else
-+#define XRX200_MAX_DEV		2
-+  #endif
-+#else
-+#define XRX200_MAX_DEV		1
-+#endif
-+
-+#define XRX200_MAX_VLAN		64
-+#define XRX200_PCE_ACTVLAN_IDX	0x01
-+#define XRX200_PCE_VLANMAP_IDX	0x02
-+
-+#define XRX200_MAX_PORT		7
-+#define XRX200_MAX_DMA		8
-+
-+#define XRX200_HEADROOM		4
-+
-+#define XRX200_TX_TIMEOUT	(10 * HZ)
-+
-+/* port type */
-+#define XRX200_PORT_TYPE_PHY	1
-+#define XRX200_PORT_TYPE_MAC	2
-+
-+/* DMA */
-+#define XRX200_DMA_DATA_LEN	0x600
-+#define XRX200_DMA_IRQ		INT_NUM_IM2_IRL0
-+#define XRX200_DMA_RX		0
-+#define XRX200_DMA_TX		1
-+#define XRX200_DMA_IS_TX(x)	(x%2)
-+#define XRX200_DMA_IS_RX(x)	(!XRX200_DMA_IS_TX(x))
-+
-+/* fetch / store dma */
-+#define FDMA_PCTRL0		0x2A00
-+#define FDMA_PCTRLx(x)		(FDMA_PCTRL0 + (x * 0x18))
-+#define SDMA_PCTRL0		0x2F00
-+#define SDMA_PCTRLx(x)		(SDMA_PCTRL0 + (x * 0x18))
-+
-+/* buffer management */
-+#define BM_PCFG0		0x200
-+#define BM_PCFGx(x)		(BM_PCFG0 + (x * 8))
-+
-+/* MDIO */
-+#define MDIO_GLOB		0x0000
-+#define MDIO_CTRL		0x0020
-+#define MDIO_READ		0x0024
-+#define MDIO_WRITE		0x0028
-+#define MDIO_PHY0		0x0054
-+#define MDIO_PHY(x)		(0x0054 - (x * sizeof(unsigned)))
-+#define MDIO_CLK_CFG0		0x002C
-+#define MDIO_CLK_CFG1		0x0030
-+
-+#define MDIO_GLOB_ENABLE	0x8000
-+#define MDIO_BUSY		BIT(12)
-+#define MDIO_RD			BIT(11)
-+#define MDIO_WR			BIT(10)
-+#define MDIO_MASK		0x1f
-+#define MDIO_ADDRSHIFT		5
-+#define MDIO1_25MHZ		9
-+
-+#define MDIO_PHY_LINK_DOWN	0x4000
-+#define MDIO_PHY_LINK_UP	0x2000
-+
-+#define MDIO_PHY_SPEED_M10	0x0000
-+#define MDIO_PHY_SPEED_M100	0x0800
-+#define MDIO_PHY_SPEED_G1	0x1000
-+
-+#define MDIO_PHY_FDUP_EN	0x0200
-+#define MDIO_PHY_FDUP_DIS	0x0600
-+
-+#define MDIO_PHY_LINK_MASK	0x6000
-+#define MDIO_PHY_SPEED_MASK	0x1800
-+#define MDIO_PHY_FDUP_MASK	0x0600
-+#define MDIO_PHY_ADDR_MASK	0x001f
-+#define MDIO_UPDATE_MASK	MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
-+					MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
-+
-+/* MII */
-+#define MII_CFG(p)		(p * 8)
-+
-+#define MII_CFG_EN		BIT(14)
-+
-+#define MII_CFG_MODE_MIIP	0x0
-+#define MII_CFG_MODE_MIIM	0x1
-+#define MII_CFG_MODE_RMIIP	0x2
-+#define MII_CFG_MODE_RMIIM	0x3
-+#define MII_CFG_MODE_RGMII	0x4
-+#define MII_CFG_MODE_MASK	0xf
-+
-+#define MII_CFG_RATE_M2P5	0x00
-+#define MII_CFG_RATE_M25	0x10
-+#define MII_CFG_RATE_M125	0x20
-+#define MII_CFG_RATE_M50	0x30
-+#define MII_CFG_RATE_AUTO	0x40
-+#define MII_CFG_RATE_MASK	0x70
-+
-+/* cpu port mac */
-+#define PMAC_HD_CTL		0x0000
-+#define PMAC_RX_IPG		0x0024
-+#define PMAC_EWAN		0x002c
-+
-+#define PMAC_IPG_MASK		0xf
-+#define PMAC_HD_CTL_AS		0x0008
-+#define PMAC_HD_CTL_AC		0x0004
-+#define PMAC_HD_CTL_RXSH	0x0040
-+#define PMAC_HD_CTL_AST		0x0080
-+#define PMAC_HD_CTL_RST		0x0100
-+
-+/* PCE */
-+#define PCE_TBL_KEY(x)		(0x1100 + ((7 - x) * 4))
-+#define PCE_TBL_MASK		0x1120
-+#define PCE_TBL_VAL(x)		(0x1124 + ((4 - x) * 4))
-+#define PCE_TBL_ADDR		0x1138
-+#define PCE_TBL_CTRL		0x113c
-+#define PCE_PMAP1		0x114c
-+#define PCE_PMAP2		0x1150
-+#define PCE_PMAP3		0x1154
-+#define PCE_GCTRL_REG(x)	(0x1158 + (x * 4))
-+#define PCE_PCTRL_REG(p, x)	(0x1200 + (((p * 0xa) + x) * 4))
-+
-+#define PCE_TBL_BUSY		BIT(15)
-+#define PCE_TBL_CFG_ADDR_MASK	0x1f
-+#define PCE_TBL_CFG_ADWR	0x20
-+#define PCE_TBL_CFG_ADWR_MASK	0x60
-+#define PCE_INGRESS		BIT(11)
-+
-+/* MAC */
-+#define MAC_FLEN_REG		(0x2314)
-+#define MAC_CTRL_REG(p, x)	(0x240c + (((p * 0xc) + x) * 4))
-+
-+/* buffer management */
-+#define BM_PCFG(p)		(0x200 + (p * 8))
-+
-+/* special tag in TX path header */
-+#define SPID_SHIFT		24
-+#define DPID_SHIFT		16
-+#define DPID_ENABLE		1
-+#define SPID_CPU_PORT		2
-+#define PORT_MAP_SEL		BIT(15)
-+#define PORT_MAP_EN		BIT(14)
-+#define PORT_MAP_SHIFT		1
-+#define PORT_MAP_MASK		0x3f
-+
-+#define SPPID_MASK		0x7
-+#define SPPID_SHIFT		4
-+
-+/* MII regs not yet in linux */
-+#define MDIO_DEVAD_NONE		(-1)
-+#define ADVERTIZE_MPD		(1 << 10)
-+
-+struct xrx200_port {
-+	u8 num;
-+	u8 phy_addr;
-+	u16 flags;
-+	phy_interface_t phy_if;
-+
-+	int link;
-+	int gpio;
-+	enum of_gpio_flags gpio_flags;
-+
-+	struct phy_device *phydev;
-+	struct device_node *phy_node;
-+};
-+
-+struct xrx200_chan {
-+	int idx;
-+	int refcount;
-+	int tx_free;
-+
-+	struct net_device dummy_dev;
-+	struct net_device *devs[XRX200_MAX_DEV];
-+
-+	struct tasklet_struct tasklet;
-+	struct napi_struct napi;
-+	struct ltq_dma_channel dma;
-+	struct sk_buff *skb[LTQ_DESC_NUM];
-+};
-+
-+struct xrx200_hw {
-+	struct clk *clk;
-+	struct mii_bus *mii_bus;
-+
-+	struct xrx200_chan chan[XRX200_MAX_DMA];
-+
-+	struct net_device *devs[XRX200_MAX_DEV];
-+	int num_devs;
-+
-+	int port_map[XRX200_MAX_PORT];
-+	unsigned short wan_map;
-+
-+	spinlock_t lock;
-+
-+	struct switch_dev swdev;
-+};
-+
-+struct xrx200_priv {
-+	struct net_device_stats stats;
-+	int id;
-+
-+	struct xrx200_port port[XRX200_MAX_PORT];
-+	int num_port;
-+	bool wan;
-+	bool sw;
-+	unsigned short port_map;
-+	unsigned char mac[6];
-+
-+	struct xrx200_hw *hw;
-+};
-+
-+static __iomem void *xrx200_switch_membase;
-+static __iomem void *xrx200_mii_membase;
-+static __iomem void *xrx200_mdio_membase;
-+static __iomem void *xrx200_pmac_membase;
-+
-+#define ltq_switch_r32(x)	ltq_r32(xrx200_switch_membase + (x))
-+#define ltq_switch_w32(x, y)	ltq_w32(x, xrx200_switch_membase + (y))
-+#define ltq_switch_w32_mask(x, y, z) \
-+			ltq_w32_mask(x, y, xrx200_switch_membase + (z))
-+
-+#define ltq_mdio_r32(x)		ltq_r32(xrx200_mdio_membase + (x))
-+#define ltq_mdio_w32(x, y)	ltq_w32(x, xrx200_mdio_membase + (y))
-+#define ltq_mdio_w32_mask(x, y, z) \
-+			ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
-+
-+#define ltq_mii_r32(x)		ltq_r32(xrx200_mii_membase + (x))
-+#define ltq_mii_w32(x, y)	ltq_w32(x, xrx200_mii_membase + (y))
-+#define ltq_mii_w32_mask(x, y, z) \
-+			ltq_w32_mask(x, y, xrx200_mii_membase + (z))
-+
-+#define ltq_pmac_r32(x)		ltq_r32(xrx200_pmac_membase + (x))
-+#define ltq_pmac_w32(x, y)	ltq_w32(x, xrx200_pmac_membase + (y))
-+#define ltq_pmac_w32_mask(x, y, z) \
-+			ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
-+
-+#define XRX200_GLOBAL_REGATTR(reg) \
-+	.id = reg, \
-+	.type = SWITCH_TYPE_INT, \
-+	.set = xrx200_set_global_attr, \
-+	.get = xrx200_get_global_attr
-+
-+#define XRX200_PORT_REGATTR(reg) \
-+	.id = reg, \
-+	.type = SWITCH_TYPE_INT, \
-+	.set = xrx200_set_port_attr, \
-+	.get = xrx200_get_port_attr
-+
-+static int xrx200sw_read_x(int reg, int x)
-+{
-+	int value, mask, addr;
-+
-+	addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
-+	value = ltq_switch_r32(addr);
-+	mask = (1 << xrx200sw_reg[reg].size) - 1;
-+	value = (value >> xrx200sw_reg[reg].shift);
-+
-+	return (value & mask);
-+}
-+
-+static int xrx200sw_read(int reg)
-+{
-+	return xrx200sw_read_x(reg, 0);
-+}
-+
-+static void xrx200sw_write_x(int value, int reg, int x)
-+{
-+	int mask, addr;
-+
-+	addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
-+	mask = (1 << xrx200sw_reg[reg].size) - 1;
-+	mask = (mask << xrx200sw_reg[reg].shift);
-+	value = (value << xrx200sw_reg[reg].shift) & mask;
-+
-+	ltq_switch_w32_mask(mask, value, addr);
-+}
-+
-+static void xrx200sw_write(int value, int reg)
-+{
-+	xrx200sw_write_x(value, reg, 0);
-+}
-+
-+struct xrx200_pce_table_entry {
-+	int index;	// PCE_TBL_ADDR.ADDR = pData->table_index
-+	int table; 	// PCE_TBL_CTRL.ADDR = pData->table
-+	unsigned short key[8];
-+	unsigned short val[5];
-+	unsigned short mask;
-+	unsigned short type;
-+	unsigned short valid;
-+	unsigned short gmap;
-+};
-+
-+static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl)
-+{
-+	// wait until hardware is ready
-+	while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+	// prepare the table access:
-+	// PCE_TBL_ADDR.ADDR = pData->table_index
-+	xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
-+	// PCE_TBL_CTRL.ADDR = pData->table
-+	xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
-+
-+	//(address-based read)
-+	xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
-+
-+	xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
-+
-+	// wait until hardware is ready
-+	while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+	// read the keys
-+	tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7);
-+	tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6);
-+	tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5);
-+	tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4);
-+	tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3);
-+	tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2);
-+	tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1);
-+	tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0);
-+
-+	// read the values
-+	tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4);
-+	tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3);
-+	tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2);
-+	tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1);
-+	tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0);
-+
-+	// read the mask
-+	tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0);
-+	// read the type
-+	tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE);
-+	// read the valid flag
-+	tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD);
-+	// read the group map
-+	tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP);
-+
-+	return 0;
-+}
-+
-+static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl)
-+{
-+	// wait until hardware is ready
-+	while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+	// prepare the table access:
-+	// PCE_TBL_ADDR.ADDR = pData->table_index
-+	xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
-+	// PCE_TBL_CTRL.ADDR = pData->table
-+	xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
-+
-+	//(address-based write)
-+	xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
-+
-+	// read the keys
-+	xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7);
-+	xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6);
-+	xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5);
-+	xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4);
-+	xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3);
-+	xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2);
-+	xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1);
-+	xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0);
-+
-+	// read the values
-+	xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4);
-+	xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3);
-+	xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2);
-+	xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1);
-+	xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0);
-+
-+	// read the mask
-+	xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0);
-+	// read the type
-+	xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE);
-+	// read the valid flag
-+	xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD);
-+	// read the group map
-+	xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP);
-+
-+	xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
-+
-+	// wait until hardware is ready
-+	while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+	return 0;
-+}
-+
-+static void xrx200sw_fixup_pvids(void)
-+{
-+	int index, p, portmap, untagged;
-+	struct xrx200_pce_table_entry tem;
-+	struct xrx200_pce_table_entry tev;
-+
-+	portmap = 0;
-+	for (p = 0; p < XRX200_MAX_PORT; p++)
-+		portmap |= BIT(p);
-+
-+	tem.table = XRX200_PCE_VLANMAP_IDX;
-+	tev.table = XRX200_PCE_ACTVLAN_IDX;
-+
-+	for (index = XRX200_MAX_VLAN; index-- > 0;)
-+	{
-+		tev.index = index;
-+		xrx200_pce_table_entry_read(&tev);
-+
-+		if (tev.valid == 0)
-+			continue;
-+
-+		tem.index = index;
-+		xrx200_pce_table_entry_read(&tem);
-+
-+		if (tem.val[0] == 0)
-+			continue;
-+
-+		untagged = portmap & (tem.val[1] ^ tem.val[2]);
-+
-+		for (p = 0; p < XRX200_MAX_PORT; p++)
-+			if (untagged & BIT(p))
-+			{
-+				portmap &= ~BIT(p);
-+				xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
-+			}
-+
-+		for (p = 0; p < XRX200_MAX_PORT; p++)
-+			if (portmap & BIT(p))
-+				xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
-+	}
-+}
-+
-+// swconfig interface
-+static void xrx200_hw_init(struct xrx200_hw *hw);
-+
-+// global
-+static int xrx200sw_reset_switch(struct switch_dev *dev)
-+{
-+	struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+
-+	xrx200_hw_init(hw);
-+
-+	return 0;
-+}
-+
-+static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+	int p;
-+
-+	if ((attr->max > 0) && (val->value.i > attr->max))
-+		return -EINVAL;
-+
-+	for (p = 0; p < XRX200_MAX_PORT; p++) {
-+		xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p);
-+		xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p);
-+	}
-+
-+	xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN);
-+	return 0;
-+}
-+
-+static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+	val->value.i = xrx200sw_read(attr->id);
-+	return 0;
-+}
-+
-+static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+	if ((attr->max > 0) && (val->value.i > attr->max))
-+		return -EINVAL;
-+
-+	xrx200sw_write(val->value.i, attr->id);
-+	return 0;
-+}
-+
-+static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+	val->value.i = xrx200sw_read(attr->id);
-+	return 0;
-+}
-+
-+// vlan
-+static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+				 struct switch_val *val)
-+{
-+	int i;
-+	struct xrx200_pce_table_entry tev;
-+	struct xrx200_pce_table_entry tem;
-+
-+	tev.table = XRX200_PCE_ACTVLAN_IDX;
-+
-+	for (i = 0; i < XRX200_MAX_VLAN; i++)
-+	{
-+		tev.index = i;
-+		xrx200_pce_table_entry_read(&tev);
-+		if (tev.key[0] == val->value.i && i != val->port_vlan)
-+			return -EINVAL;
-+	}
-+
-+	tev.index = val->port_vlan;
-+	xrx200_pce_table_entry_read(&tev);
-+	tev.key[0] = val->value.i;
-+	tev.valid = val->value.i > 0;
-+	xrx200_pce_table_entry_write(&tev);
-+
-+	tem.table = XRX200_PCE_VLANMAP_IDX;
-+	tem.index = val->port_vlan;
-+	xrx200_pce_table_entry_read(&tem);
-+	tem.val[0] = val->value.i;
-+	xrx200_pce_table_entry_write(&tem);
-+
-+	xrx200sw_fixup_pvids();
-+	return 0;
-+}
-+
-+static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+				 struct switch_val *val)
-+{
-+	struct xrx200_pce_table_entry te;
-+
-+	te.table = XRX200_PCE_ACTVLAN_IDX;
-+	te.index = val->port_vlan;
-+	xrx200_pce_table_entry_read(&te);
-+	val->value.i = te.key[0];
-+
-+	return 0;
-+}
-+
-+static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+	int i, portmap, tagmap, untagged;
-+	struct xrx200_pce_table_entry tem;
-+
-+	portmap = 0;
-+	tagmap = 0;
-+	for (i = 0; i < val->len; i++)
-+	{
-+		struct switch_port *p = &val->value.ports[i];
-+
-+		portmap |= (1 << p->id);
-+		if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
-+			tagmap |= (1 << p->id);
-+	}
-+
-+	tem.table = XRX200_PCE_VLANMAP_IDX;
-+
-+	untagged = portmap ^ tagmap;
-+	for (i = 0; i < XRX200_MAX_VLAN; i++)
-+	{
-+		tem.index = i;
-+		xrx200_pce_table_entry_read(&tem);
-+
-+		if (tem.val[0] == 0)
-+			continue;
-+
-+		if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i))
-+			return -EINVAL;
-+	}
-+
-+	tem.index = val->port_vlan;
-+	xrx200_pce_table_entry_read(&tem);
-+
-+	// auto-enable this vlan if not enabled already
-+	if (tem.val[0] == 0)
-+	{
-+		struct switch_val v;
-+		v.port_vlan = val->port_vlan;
-+		v.value.i = val->port_vlan;
-+		if(xrx200sw_set_vlan_vid(dev, NULL, &v))
-+			return -EINVAL;
-+
-+		//read updated tem
-+		tem.index = val->port_vlan;
-+		xrx200_pce_table_entry_read(&tem);
-+	}
-+
-+	tem.val[1] = portmap;
-+	tem.val[2] = tagmap;
-+	xrx200_pce_table_entry_write(&tem);
-+
-+	xrx200sw_fixup_pvids();
-+
-+	return 0;
-+}
-+
-+static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+	int i;
-+	unsigned short ports, tags;
-+	struct xrx200_pce_table_entry tem;
-+
-+	tem.table = XRX200_PCE_VLANMAP_IDX;
-+	tem.index = val->port_vlan;
-+	xrx200_pce_table_entry_read(&tem);
-+
-+	ports = tem.val[1];
-+	tags = tem.val[2];
-+
-+	for (i = 0; i < XRX200_MAX_PORT; i++) {
-+		struct switch_port *p;
-+
-+		if (!(ports & (1 << i)))
-+			continue;
-+
-+		p = &val->value.ports[val->len++];
-+		p->id = i;
-+		if (tags & (1 << i))
-+			p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
-+		else
-+			p->flags = 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
-+				 struct switch_val *val)
-+{
-+	struct xrx200_pce_table_entry tev;
-+
-+	tev.table = XRX200_PCE_ACTVLAN_IDX;
-+	tev.index = val->port_vlan;
-+	xrx200_pce_table_entry_read(&tev);
-+
-+	if (tev.key[0] == 0)
-+		return -EINVAL;
-+
-+	tev.valid = val->value.i;
-+	xrx200_pce_table_entry_write(&tev);
-+
-+	xrx200sw_fixup_pvids();
-+	return 0;
-+}
-+
-+static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
-+				 struct switch_val *val)
-+{
-+	struct xrx200_pce_table_entry tev;
-+
-+	tev.table = XRX200_PCE_ACTVLAN_IDX;
-+	tev.index = val->port_vlan;
-+	xrx200_pce_table_entry_read(&tev);
-+	val->value.i = tev.valid;
-+
-+	return 0;
-+}
-+
-+// port
-+static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
-+{
-+	struct xrx200_pce_table_entry tev;
-+
-+	if (port >= XRX200_MAX_PORT)
-+		return -EINVAL;
-+
-+	tev.table = XRX200_PCE_ACTVLAN_IDX;
-+	tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port);
-+	xrx200_pce_table_entry_read(&tev);
-+
-+	*val = tev.key[0];
-+	return 0;
-+}
-+
-+static int xrx200sw_get_port_link(struct switch_dev *dev,
-+				  int port,
-+				  struct switch_port_link *link)
-+{
-+	if (port >= XRX200_MAX_PORT)
-+		return -EINVAL;
-+
-+	link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port);
-+	if (!link->link)
-+		return 0;
-+
-+	link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port);
-+
-+	link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010);
-+	link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020);
-+	link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port));
-+
-+	link->speed = SWITCH_PORT_SPEED_10;
-+	if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port))
-+		link->speed = SWITCH_PORT_SPEED_100;
-+	if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port))
-+		link->speed = SWITCH_PORT_SPEED_1000;
-+
-+	return 0;
-+}
-+
-+static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+	printk("%s %s(%d)\n", __FILE__, __func__, __LINE__);
-+	if (val->port_vlan >= XRX200_MAX_PORT)
-+		return -EINVAL;
-+
-+	if ((attr->max > 0) && (val->value.i > attr->max))
-+		return -EINVAL;
-+
-+	xrx200sw_write_x(val->value.i, attr->id, val->port_vlan);
-+	return 0;
-+}
-+
-+static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+	if (val->port_vlan >= XRX200_MAX_PORT)
-+		return -EINVAL;
-+
-+	val->value.i = xrx200sw_read_x(attr->id, val->port_vlan);
-+	return 0;
-+}
-+
-+// attributes
-+static struct switch_attr xrx200sw_globals[] = {
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.set = xrx200_set_vlan_mode_enable,
-+		.get = xrx200_get_vlan_mode_enable,
-+		.name = "enable_vlan",
-+		.description = "Enable VLAN mode",
-+		.max = 1},
-+};
-+
-+static struct switch_attr xrx200sw_port[] = {
-+	{
-+	XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR),
-+	.name = "uvr",
-+	.description = "Unknown VLAN Rule",
-+	.max = 1,
-+	},
-+	{
-+	XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR),
-+	.name = "vsr",
-+	.description = "VLAN Security Rule",
-+	.max = 1,
-+	},
-+	{
-+	XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR),
-+	.name = "vinr",
-+	.description = "VLAN Ingress Tag Rule",
-+	.max = 2,
-+	},
-+	{
-+	XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM),
-+	.name = "tvm",
-+	.description = "Transparent VLAN Mode",
-+	.max = 1,
-+	},
-+};
-+
-+static struct switch_attr xrx200sw_vlan[] = {
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "vid",
-+		.description = "VLAN ID (0-4094)",
-+		.set = xrx200sw_set_vlan_vid,
-+		.get = xrx200sw_get_vlan_vid,
-+		.max = 4094,
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "enable",
-+		.description = "Enable VLAN",
-+		.set = xrx200sw_set_vlan_enable,
-+		.get = xrx200sw_get_vlan_enable,
-+		.max = 1,
-+	},
-+};
-+
-+static const struct switch_dev_ops xrx200sw_ops = {
-+	.attr_global = {
-+		.attr = xrx200sw_globals,
-+		.n_attr = ARRAY_SIZE(xrx200sw_globals),
-+	},
-+	.attr_port = {
-+		.attr = xrx200sw_port,
-+		.n_attr = ARRAY_SIZE(xrx200sw_port),
-+	},
-+	.attr_vlan = {
-+		.attr = xrx200sw_vlan,
-+		.n_attr = ARRAY_SIZE(xrx200sw_vlan),
-+	},
-+	.get_vlan_ports = xrx200sw_get_vlan_ports,
-+	.set_vlan_ports = xrx200sw_set_vlan_ports,
-+	.get_port_pvid = xrx200sw_get_port_pvid,
-+	.reset_switch = xrx200sw_reset_switch,
-+	.get_port_link = xrx200sw_get_port_link,
-+//	.get_port_stats = xrx200sw_get_port_stats, //TODO
-+};
-+
-+static int xrx200sw_init(struct xrx200_hw *hw)
-+{
-+	int netdev_num;
-+
-+	for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++)
-+	{
-+		struct switch_dev *swdev;
-+		struct net_device *dev = hw->devs[netdev_num];
-+		struct xrx200_priv *priv = netdev_priv(dev);
-+		if (!priv->sw)
-+			continue;
-+
-+		swdev = &hw->swdev;
-+
-+		swdev->name = "Lantiq XRX200 Switch";
-+		swdev->vlans = XRX200_MAX_VLAN;
-+		swdev->ports = XRX200_MAX_PORT;
-+		swdev->cpu_port = 6;
-+		swdev->ops = &xrx200sw_ops;
-+
-+		register_switch(swdev, dev);
-+		return 0; // enough switches
-+	}
-+	return 0;
-+}
-+
-+static int xrx200_open(struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	unsigned long flags;
-+	int i;
-+
-+	for (i = 0; i < XRX200_MAX_DMA; i++) {
-+		if (!priv->hw->chan[i].dma.irq)
-+			continue;
-+		spin_lock_irqsave(&priv->hw->lock, flags);
-+		if (!priv->hw->chan[i].refcount) {
-+			if (XRX200_DMA_IS_RX(i))
-+				napi_enable(&priv->hw->chan[i].napi);
-+			ltq_dma_open(&priv->hw->chan[i].dma);
-+		}
-+		priv->hw->chan[i].refcount++;
-+		spin_unlock_irqrestore(&priv->hw->lock, flags);
-+	}
-+	for (i = 0; i < priv->num_port; i++)
-+		if (priv->port[i].phydev)
-+			phy_start(priv->port[i].phydev);
-+	netif_start_queue(dev);
-+
-+	return 0;
-+}
-+
-+static int xrx200_close(struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	unsigned long flags;
-+	int i;
-+
-+	netif_stop_queue(dev);
-+
-+	for (i = 0; i < priv->num_port; i++)
-+		if (priv->port[i].phydev)
-+			phy_stop(priv->port[i].phydev);
-+
-+	for (i = 0; i < XRX200_MAX_DMA; i++) {
-+		if (!priv->hw->chan[i].dma.irq)
-+			continue;
-+		spin_lock_irqsave(&priv->hw->lock, flags);
-+		priv->hw->chan[i].refcount--;
-+		if (!priv->hw->chan[i].refcount) {
-+			if (XRX200_DMA_IS_RX(i))
-+				napi_disable(&priv->hw->chan[i].napi);
-+			ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
-+		}
-+		spin_unlock_irqrestore(&priv->hw->lock, flags);
-+	}
-+
-+	return 0;
-+}
-+
-+static int xrx200_alloc_skb(struct xrx200_chan *ch)
-+{
-+#define DMA_PAD	(NET_IP_ALIGN + NET_SKB_PAD)
-+	ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
-+	if (!ch->skb[ch->dma.desc])
-+		return -ENOMEM;
-+
-+	skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
-+	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-+		ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
-+			DMA_FROM_DEVICE);
-+	ch->dma.desc_base[ch->dma.desc].addr =
-+		CPHYSADDR(ch->skb[ch->dma.desc]->data);
-+	ch->dma.desc_base[ch->dma.desc].ctl =
-+		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
-+		XRX200_DMA_DATA_LEN;
-+	skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
-+
-+	return 0;
-+}
-+
-+static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
-+{
-+	struct net_device *dev = ch->devs[id];
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+	struct sk_buff *skb = ch->skb[ch->dma.desc];
-+	int len = (desc->ctl & LTQ_DMA_SIZE_MASK);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&priv->hw->lock, flags);
-+	if (xrx200_alloc_skb(ch)) {
-+		netdev_err(dev,
-+			"failed to allocate new rx buffer, stopping DMA\n");
-+		ltq_dma_close(&ch->dma);
-+	}
-+
-+	ch->dma.desc++;
-+	ch->dma.desc %= LTQ_DESC_NUM;
-+	spin_unlock_irqrestore(&priv->hw->lock, flags);
-+
-+	skb_put(skb, len);
-+#ifdef SW_ROUTING
-+	skb_pull(skb, 8);
-+#endif
-+	skb->dev = dev;
-+	skb->protocol = eth_type_trans(skb, dev);
-+	netif_receive_skb(skb);
-+	priv->stats.rx_packets++;
-+	priv->stats.rx_bytes+=len;
-+}
-+
-+static int xrx200_poll_rx(struct napi_struct *napi, int budget)
-+{
-+	struct xrx200_chan *ch = container_of(napi,
-+				struct xrx200_chan, napi);
-+	struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
-+	int rx = 0;
-+	int complete = 0;
-+	unsigned long flags;
-+
-+	while ((rx < budget) && !complete) {
-+		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+		if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+#ifdef SW_ROUTING
-+			struct sk_buff *skb = ch->skb[ch->dma.desc];
-+			u32 *special_tag = (u32*)skb->data;
-+			int port = (special_tag[1] >> SPPID_SHIFT) & SPPID_MASK;
-+			xrx200_hw_receive(ch, priv->hw->port_map[port]);
-+#else
-+			xrx200_hw_receive(ch, 0);
-+#endif
-+			rx++;
-+		} else {
-+			complete = 1;
-+		}
-+	}
-+	if (complete || !rx) {
-+		napi_complete(&ch->napi);
-+		spin_lock_irqsave(&priv->hw->lock, flags);
-+		ltq_dma_ack_irq(&ch->dma);
-+		spin_unlock_irqrestore(&priv->hw->lock, flags);
-+	}
-+	return rx;
-+}
-+
-+static void xrx200_tx_housekeeping(unsigned long ptr)
-+{
-+	struct xrx200_hw *hw = (struct xrx200_hw *) ptr;
-+	struct xrx200_chan *ch = &hw->chan[XRX200_DMA_TX];
-+	unsigned long flags;
-+	int i;
-+
-+	spin_lock_irqsave(&hw->lock, flags);
-+	while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+		dev_kfree_skb_any(ch->skb[ch->tx_free]);
-+		ch->skb[ch->tx_free] = NULL;
-+		memset(&ch->dma.desc_base[ch->tx_free], 0,
-+			sizeof(struct ltq_dma_desc));
-+		ch->tx_free++;
-+		ch->tx_free %= LTQ_DESC_NUM;
-+	}
-+	spin_unlock_irqrestore(&hw->lock, flags);
-+
-+	for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) {
-+		struct netdev_queue *txq =
-+			netdev_get_tx_queue(ch->devs[i], 0);
-+		if (netif_tx_queue_stopped(txq))
-+			netif_tx_start_queue(txq);
-+	}
-+
-+	spin_lock_irqsave(&hw->lock, flags);
-+	ltq_dma_ack_irq(&ch->dma);
-+	spin_unlock_irqrestore(&hw->lock, flags);
-+}
-+
-+static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+
-+	return &priv->stats;
-+}
-+
-+static void xrx200_tx_timeout(struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+
-+	printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
-+
-+	priv->stats.tx_errors++;
-+	netif_wake_queue(dev);
-+}
-+
-+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	int queue = skb_get_queue_mapping(skb);
-+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	struct xrx200_chan *ch = &priv->hw->chan[XRX200_DMA_TX];
-+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+	unsigned long flags;
-+	u32 byte_offset;
-+	int len;
-+#ifdef SW_ROUTING
-+  #ifdef SW_PORTMAP
-+	u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | PORT_MAP_SEL | PORT_MAP_EN | DPID_ENABLE;
-+  #else
-+	u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
-+  #endif
-+#endif
-+
-+	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-+
-+	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-+		netdev_err(dev, "tx ring full\n");
-+		netif_tx_stop_queue(txq);
-+		return NETDEV_TX_BUSY;
-+	}
-+#ifdef SW_ROUTING
-+  #ifdef SW_PORTMAP
-+	special_tag |= priv->port_map << PORT_MAP_SHIFT;
-+  #else
-+	if(priv->id)
-+		special_tag |= (1 << DPID_SHIFT);
-+  #endif
-+	if(skb_headroom(skb) < 4) {
-+		struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
-+		dev_kfree_skb_any(skb);
-+		skb = tmp;
-+	}
-+	skb_push(skb, 4);
-+	memcpy(skb->data, &special_tag, sizeof(u32));
-+	len += 4;
-+#endif
-+
-+	/* dma needs to start on a 16 byte aligned address */
-+	byte_offset = CPHYSADDR(skb->data) % 16;
-+	ch->skb[ch->dma.desc] = skb;
-+
-+	dev->trans_start = jiffies;
-+
-+	spin_lock_irqsave(&priv->hw->lock, flags);
-+	desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
-+						DMA_TO_DEVICE)) - byte_offset;
-+	wmb();
-+	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
-+		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
-+	ch->dma.desc++;
-+	ch->dma.desc %= LTQ_DESC_NUM;
-+	spin_unlock_irqrestore(&priv->hw->lock, flags);
-+
-+	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
-+		netif_tx_stop_queue(txq);
-+
-+	priv->stats.tx_packets++;
-+	priv->stats.tx_bytes+=len;
-+
-+	return NETDEV_TX_OK;
-+}
-+
-+static irqreturn_t xrx200_dma_irq(int irq, void *priv)
-+{
-+	struct xrx200_hw *hw = priv;
-+	int ch = irq - XRX200_DMA_IRQ;
-+
-+	if (ch % 2)
-+		tasklet_schedule(&hw->chan[ch].tasklet);
-+	else
-+		napi_schedule(&hw->chan[ch].napi);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int xrx200_dma_init(struct xrx200_hw *hw)
-+{
-+	int i, err = 0;
-+
-+	ltq_dma_init_port(DMA_PORT_ETOP);
-+
-+	for (i = 0; i < 8 && !err; i++) {
-+		int irq = XRX200_DMA_IRQ + i;
-+		struct xrx200_chan *ch = &hw->chan[i];
-+
-+		ch->idx = ch->dma.nr = i;
-+
-+		if (i == XRX200_DMA_TX) {
-+			ltq_dma_alloc_tx(&ch->dma);
-+			err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
-+		} else if (i == XRX200_DMA_RX) {
-+			ltq_dma_alloc_rx(&ch->dma);
-+			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
-+					ch->dma.desc++)
-+				if (xrx200_alloc_skb(ch))
-+					err = -ENOMEM;
-+			ch->dma.desc = 0;
-+			err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
-+		} else
-+			continue;
-+
-+		if (!err)
-+			ch->dma.irq = irq;
-+	}
-+
-+	return err;
-+}
-+
-+#ifdef SW_POLLING
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+	u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK;
-+	u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
-+	u16 miirate = 0;
-+
-+	switch (port->phydev->speed) {
-+	case SPEED_1000:
-+		phyaddr |= MDIO_PHY_SPEED_G1;
-+		miirate = MII_CFG_RATE_M125;
-+		break;
-+
-+	case SPEED_100:
-+		phyaddr |= MDIO_PHY_SPEED_M100;
-+		switch (miimode) {
-+		case MII_CFG_MODE_RMIIM:
-+		case MII_CFG_MODE_RMIIP:
-+			miirate = MII_CFG_RATE_M50;
-+			break;
-+		default:
-+			miirate = MII_CFG_RATE_M25;
-+			break;
-+		}
-+		break;
-+
-+	default:
-+		phyaddr |= MDIO_PHY_SPEED_M10;
-+		miirate = MII_CFG_RATE_M2P5;
-+		break;
-+	}
-+
-+	if (port->phydev->link)
-+		phyaddr |= MDIO_PHY_LINK_UP;
-+	else
-+		phyaddr |= MDIO_PHY_LINK_DOWN;
-+
-+	if (port->phydev->duplex == DUPLEX_FULL)
-+		phyaddr |= MDIO_PHY_FDUP_EN;
-+	else
-+		phyaddr |= MDIO_PHY_FDUP_DIS;
-+
-+	ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
-+	ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
-+	udelay(1);
-+}
-+#else
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+
-+}
-+#endif
-+
-+static void xrx200_mdio_link(struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	int i;
-+
-+	for (i = 0; i < priv->num_port; i++) {
-+		if (!priv->port[i].phydev)
-+			continue;
-+
-+		if (priv->port[i].link != priv->port[i].phydev->link) {
-+			xrx200_gmac_update(&priv->port[i]);
-+			priv->port[i].link = priv->port[i].phydev->link;
-+			netdev_info(dev, "port %d %s link\n",
-+				priv->port[i].num,
-+				(priv->port[i].link)?("got"):("lost"));
-+		}
-+	}
-+}
-+
-+static inline int xrx200_mdio_poll(struct mii_bus *bus)
-+{
-+	unsigned cnt = 10000;
-+
-+	while (likely(cnt--)) {
-+		unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
-+		if ((ctrl & MDIO_BUSY) == 0)
-+			return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
-+{
-+	if (xrx200_mdio_poll(bus))
-+		return 1;
-+
-+	ltq_mdio_w32(val, MDIO_WRITE);
-+	ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
-+		((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+		(reg & MDIO_MASK),
-+		MDIO_CTRL);
-+
-+	return 0;
-+}
-+
-+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
-+{
-+	if (xrx200_mdio_poll(bus))
-+		return -1;
-+
-+	ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
-+		((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+		(reg & MDIO_MASK),
-+		MDIO_CTRL);
-+
-+	if (xrx200_mdio_poll(bus))
-+		return -1;
-+
-+	return ltq_mdio_r32(MDIO_READ);
-+}
-+
-+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	struct phy_device *phydev = NULL;
-+	unsigned val;
-+
-+	phydev = priv->hw->mii_bus->phy_map[port->phy_addr];
-+
-+	if (!phydev) {
-+		netdev_err(dev, "no PHY found\n");
-+		return -ENODEV;
-+	}
-+
-+	phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link,
-+				port->phy_if);
-+
-+	if (IS_ERR(phydev)) {
-+		netdev_err(dev, "Could not attach to PHY\n");
-+		return PTR_ERR(phydev);
-+	}
-+
-+	phydev->supported &= (SUPPORTED_10baseT_Half
-+			| SUPPORTED_10baseT_Full
-+			| SUPPORTED_100baseT_Half
-+			| SUPPORTED_100baseT_Full
-+			| SUPPORTED_1000baseT_Half
-+			| SUPPORTED_1000baseT_Full
-+			| SUPPORTED_Autoneg
-+			| SUPPORTED_MII
-+			| SUPPORTED_TP);
-+	phydev->advertising = phydev->supported;
-+	port->phydev = phydev;
-+
-+	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
-+		dev->name, phydev->drv->name,
-+		dev_name(&phydev->dev), phydev->irq);
-+
-+#ifdef SW_POLLING
-+	phy_read_status(phydev);
-+
-+	val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
-+	val |= ADVERTIZE_MPD;
-+	xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
-+	xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
-+
-+	phy_start_aneg(phydev);
-+#endif
-+	return 0;
-+}
-+
-+static void xrx200_port_config(struct xrx200_priv *priv,
-+		const struct xrx200_port *port)
-+{
-+	u16 miimode = 0;
-+
-+	switch (port->num) {
-+	case 0: /* xMII0 */
-+	case 1: /* xMII1 */
-+		switch (port->phy_if) {
-+		case PHY_INTERFACE_MODE_MII:
-+			if (port->flags & XRX200_PORT_TYPE_PHY)
-+				/* MII MAC mode, connected to external PHY */
-+				miimode = MII_CFG_MODE_MIIM;
-+			else
-+				/* MII PHY mode, connected to external MAC */
-+				miimode = MII_CFG_MODE_MIIP;
-+			break;
-+		case PHY_INTERFACE_MODE_RMII:
-+			if (port->flags & XRX200_PORT_TYPE_PHY)
-+				/* RMII MAC mode, connected to external PHY */
-+				miimode = MII_CFG_MODE_RMIIM;
-+			else
-+				/* RMII PHY mode, connected to external MAC */
-+				miimode = MII_CFG_MODE_RMIIP;
-+			break;
-+		case PHY_INTERFACE_MODE_RGMII:
-+			/* RGMII MAC mode, connected to external PHY */
-+			miimode = MII_CFG_MODE_RGMII;
-+			break;
-+		default:
-+			break;
-+		}
-+		break;
-+	case 2: /* internal GPHY0 */
-+	case 3: /* internal GPHY0 */
-+	case 4: /* internal GPHY1 */
-+		switch (port->phy_if) {
-+			case PHY_INTERFACE_MODE_MII:
-+			case PHY_INTERFACE_MODE_GMII:
-+				/* MII MAC mode, connected to internal GPHY */
-+				miimode = MII_CFG_MODE_MIIM;
-+				break;
-+			default:
-+				break;
-+		}
-+		break;
-+	case 5: /* internal GPHY1 or xMII2 */
-+		switch (port->phy_if) {
-+		case PHY_INTERFACE_MODE_MII:
-+			/* MII MAC mode, connected to internal GPHY */
-+			miimode = MII_CFG_MODE_MIIM;
-+			break;
-+		case PHY_INTERFACE_MODE_RGMII:
-+			/* RGMII MAC mode, connected to external PHY */
-+			miimode = MII_CFG_MODE_RGMII;
-+			break;
-+		default:
-+			break;
-+		}
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
-+		MII_CFG(port->num));
-+}
-+
-+static int xrx200_init(struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	struct sockaddr mac;
-+	int err, i;
-+
-+#ifndef SW_POLLING
-+	unsigned int reg = 0;
-+
-+	/* enable auto polling */
-+	for (i = 0; i < priv->num_port; i++)
-+		reg |= BIT(priv->port[i].num);
-+	ltq_mdio_w32(reg, MDIO_CLK_CFG0);
-+	ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
-+#endif
-+
-+	/* setup each port */
-+	for (i = 0; i < priv->num_port; i++)
-+		xrx200_port_config(priv, &priv->port[i]);
-+
-+	memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
-+	if (!is_valid_ether_addr(mac.sa_data)) {
-+		pr_warn("net-xrx200: invalid MAC, using random\n");
-+		eth_random_addr(mac.sa_data);
-+		dev->addr_assign_type |= NET_ADDR_RANDOM;
-+	}
-+
-+	err = eth_mac_addr(dev, &mac);
-+	if (err)
-+		goto err_netdev;
-+
-+	for (i = 0; i < priv->num_port; i++)
-+		if (xrx200_mdio_probe(dev, &priv->port[i]))
-+			pr_warn("xrx200-mdio: probing phy of port %d failed\n",
-+					 priv->port[i].num);
-+
-+	return 0;
-+
-+err_netdev:
-+	unregister_netdev(dev);
-+	free_netdev(dev);
-+	return err;
-+}
-+
-+static void xrx200_pci_microcode(void)
-+{
-+	int i;
-+
-+	ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
-+		PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
-+	ltq_switch_w32(0, PCE_TBL_MASK);
-+
-+	for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
-+		ltq_switch_w32(i, PCE_TBL_ADDR);
-+		ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
-+		ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
-+		ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
-+		ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
-+
-+		// start the table access:
-+		ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
-+		while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
-+	}
-+
-+	/* tell the switch that the microcode is loaded */
-+	ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
-+}
-+
-+static void xrx200_hw_init(struct xrx200_hw *hw)
-+{
-+	int i;
-+
-+	/* enable clock gate */
-+	clk_enable(hw->clk);
-+
-+	ltq_switch_w32(1, 0);
-+	mdelay(100);
-+	ltq_switch_w32(0, 0);
-+	/*
-+	 * TODO: we should really disbale all phys/miis here and explicitly
-+	 * enable them in the device secific init function
-+	 */
-+
-+	/* disable port fetch/store dma */
-+	for (i = 0; i < 7; i++ ) {
-+		ltq_switch_w32(0, FDMA_PCTRLx(i));
-+		ltq_switch_w32(0, SDMA_PCTRLx(i));
-+	}
-+
-+	/* enable Switch */
-+	ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
-+
-+	/* load the pce microcode */
-+	xrx200_pci_microcode();
-+
-+	/* Default unknown Broadcat/Multicast/Unicast port maps */
-+	ltq_switch_w32(0x7f, PCE_PMAP1);
-+	ltq_switch_w32(0x7f, PCE_PMAP2);
-+	ltq_switch_w32(0x7f, PCE_PMAP3);
-+
-+	/* RMON Counter Enable for all physical ports */
-+	for (i = 0; i < 7; i++)
-+		ltq_switch_w32(0x1, BM_PCFG(i));
-+
-+	/* disable auto polling */
-+	ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
-+
-+	/* enable port statistic counters */
-+	for (i = 0; i < 7; i++)
-+		ltq_switch_w32(0x1, BM_PCFGx(i));
-+
-+	/* set IPG to 12 */
-+	ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
-+
-+#ifdef SW_ROUTING
-+	/* enable status header, enable CRC */
-+	ltq_pmac_w32_mask(0,
-+		PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC,
-+		PMAC_HD_CTL);
-+#else
-+	/* disable status header, enable CRC */
-+	ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
-+		PMAC_HD_CTL_AC,
-+		PMAC_HD_CTL);
-+#endif
-+
-+	/* enable port fetch/store dma & VLAN Modification */
-+	for (i = 0; i < 7; i++ ) {
-+		ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i));
-+		ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
-+		ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
-+	}
-+
-+	/* enable special tag insertion on cpu port */
-+	ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
-+	ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
-+	ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
-+	ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
-+}
-+
-+static void xrx200_hw_cleanup(struct xrx200_hw *hw)
-+{
-+	int i;
-+
-+	/* disable the switch */
-+	ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
-+
-+	/* free the channels and IRQs */
-+	for (i = 0; i < 2; i++) {
-+		ltq_dma_free(&hw->chan[i].dma);
-+		if (hw->chan[i].dma.irq)
-+			free_irq(hw->chan[i].dma.irq, hw);
-+	}
-+
-+	/* free the allocated RX ring */
-+	for (i = 0; i < LTQ_DESC_NUM; i++)
-+		dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
-+
-+	/* clear the mdio bus */
-+	mdiobus_unregister(hw->mii_bus);
-+	mdiobus_free(hw->mii_bus);
-+
-+	/* release the clock */
-+	clk_disable(hw->clk);
-+	clk_put(hw->clk);
-+}
-+
-+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
-+{
-+	hw->mii_bus = mdiobus_alloc();
-+	if (!hw->mii_bus)
-+		return -ENOMEM;
-+
-+	hw->mii_bus->read = xrx200_mdio_rd;
-+	hw->mii_bus->write = xrx200_mdio_wr;
-+	hw->mii_bus->name = "lantiq,xrx200-mdio";
-+	snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
-+
-+	if (of_mdiobus_register(hw->mii_bus, np)) {
-+		mdiobus_free(hw->mii_bus);
-+		return -ENXIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
-+{
-+	const __be32 *addr, *id = of_get_property(port, "reg", NULL);
-+	struct xrx200_port *p = &priv->port[priv->num_port];
-+
-+	if (!id)
-+		return;
-+
-+	memset(p, 0, sizeof(struct xrx200_port));
-+	p->phy_node = of_parse_phandle(port, "phy-handle", 0);
-+	addr = of_get_property(p->phy_node, "reg", NULL);
-+	if (!addr)
-+		return;
-+
-+	p->num = *id;
-+	p->phy_addr = *addr;
-+	p->phy_if = of_get_phy_mode(port);
-+	if (p->phy_addr > 0x10)
-+		p->flags = XRX200_PORT_TYPE_MAC;
-+	else
-+		p->flags = XRX200_PORT_TYPE_PHY;
-+	priv->num_port++;
-+
-+	p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
-+	if (gpio_is_valid(p->gpio))
-+		if (!gpio_request(p->gpio, "phy-reset")) {
-+			gpio_direction_output(p->gpio,
-+				(p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
-+			udelay(100);
-+			gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+		}
-+	/* is this port a wan port ? */
-+	if (priv->wan)
-+		priv->hw->wan_map |= BIT(p->num);
-+
-+	priv->port_map |= BIT(p->num);
-+
-+	/* store the port id in the hw struct so we can map ports -> devices */
-+	priv->hw->port_map[p->num] = priv->hw->num_devs;
-+}
-+
-+static const struct net_device_ops xrx200_netdev_ops = {
-+	.ndo_init		= xrx200_init,
-+	.ndo_open		= xrx200_open,
-+	.ndo_stop		= xrx200_close,
-+	.ndo_start_xmit		= xrx200_start_xmit,
-+	.ndo_set_mac_address	= eth_mac_addr,
-+	.ndo_validate_addr	= eth_validate_addr,
-+	.ndo_change_mtu		= eth_change_mtu,
-+	.ndo_get_stats		= xrx200_get_stats,
-+	.ndo_tx_timeout		= xrx200_tx_timeout,
-+};
-+
-+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface)
-+{
-+	struct xrx200_priv *priv;
-+	struct device_node *port;
-+	const __be32 *wan;
-+
-+	/* alloc the network device */
-+	hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
-+	if (!hw->devs[hw->num_devs])
-+		return;
-+
-+	/* setup the network device */
-+	strcpy(hw->devs[hw->num_devs]->name, "eth%d");
-+	hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
-+	hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
-+	hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
-+
-+	/* setup our private data */
-+	priv = netdev_priv(hw->devs[hw->num_devs]);
-+	priv->hw = hw;
-+	of_get_mac_address_mtd(iface, priv->mac);
-+	priv->id = hw->num_devs;
-+
-+	/* is this the wan interface ? */
-+	wan = of_get_property(iface, "lantiq,wan", NULL);
-+	if (wan && (*wan == 1))
-+		priv->wan = 1;
-+
-+	/* should the switch be enabled on this interface ? */
-+	if (of_find_property(iface, "lantiq,switch", NULL))
-+		priv->sw = 1;
-+
-+	/* load the ports that are part of the interface */
-+	for_each_child_of_node(iface, port)
-+		if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
-+			xrx200_of_port(priv, port);
-+
-+	/* register the actual device */
-+	if (!register_netdev(hw->devs[hw->num_devs]))
-+		hw->num_devs++;
-+}
-+
-+static struct xrx200_hw xrx200_hw;
-+
-+static int xrx200_probe(struct platform_device *pdev)
-+{
-+	struct resource *res[4];
-+	struct device_node *mdio_np, *iface_np;
-+	int i;
-+
-+	/* load the memory ranges */
-+	for (i = 0; i < 4; i++) {
-+		res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+		if (!res[i]) {
-+			dev_err(&pdev->dev, "failed to get resources\n");
-+			return -ENOENT;
-+		}
-+	}
-+	xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]);
-+	xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]);
-+	xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]);
-+	xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]);
-+	if (!xrx200_switch_membase || !xrx200_mdio_membase ||
-+			!xrx200_mii_membase || !xrx200_pmac_membase) {
-+		dev_err(&pdev->dev, "failed to request and remap io ranges \n");
-+		return -ENOMEM;
-+	}
-+
-+	/* get the clock */
-+	xrx200_hw.clk = clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(xrx200_hw.clk)) {
-+		dev_err(&pdev->dev, "failed to get clock\n");
-+		return PTR_ERR(xrx200_hw.clk);
-+	}
-+
-+	/* bring up the dma engine and IP core */
-+	spin_lock_init(&xrx200_hw.lock);
-+	xrx200_dma_init(&xrx200_hw);
-+	xrx200_hw_init(&xrx200_hw);
-+	tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw);
-+
-+	/* bring up the mdio bus */
-+	mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
-+				"lantiq,xrx200-mdio");
-+	if (mdio_np)
-+		if (xrx200_of_mdio(&xrx200_hw, mdio_np))
-+			dev_err(&pdev->dev, "mdio probe failed\n");
-+
-+	/* load the interfaces */
-+	for_each_child_of_node(pdev->dev.of_node, iface_np)
-+		if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
-+			if (xrx200_hw.num_devs < XRX200_MAX_DEV)
-+				xrx200_of_iface(&xrx200_hw, iface_np);
-+			else
-+				dev_err(&pdev->dev,
-+					"only %d interfaces allowed\n",
-+					XRX200_MAX_DEV);
-+		}
-+
-+	if (!xrx200_hw.num_devs) {
-+		xrx200_hw_cleanup(&xrx200_hw);
-+		dev_err(&pdev->dev, "failed to load interfaces\n");
-+		return -ENOENT;
-+	}
-+
-+	xrx200sw_init(&xrx200_hw);
-+
-+	/* set wan port mask */
-+	ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
-+
-+	for (i = 0; i < xrx200_hw.num_devs; i++) {
-+		xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
-+		xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
-+	}
-+
-+	/* setup NAPI */
-+	init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
-+	netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
-+			&xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
-+
-+	platform_set_drvdata(pdev, &xrx200_hw);
-+
-+	return 0;
-+}
-+
-+static int xrx200_remove(struct platform_device *pdev)
-+{
-+	struct net_device *dev = platform_get_drvdata(pdev);
-+	struct xrx200_priv *priv;
-+
-+	if (!dev)
-+		return 0;
-+
-+	priv = netdev_priv(dev);
-+
-+	/* free stack related instances */
-+	netif_stop_queue(dev);
-+	netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
-+
-+	/* shut down hardware */
-+	xrx200_hw_cleanup(&xrx200_hw);
-+
-+	/* remove the actual device */
-+	unregister_netdev(dev);
-+	free_netdev(dev);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id xrx200_match[] = {
-+	{ .compatible = "lantiq,xrx200-net" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, xrx200_match);
-+
-+static struct platform_driver xrx200_driver = {
-+	.probe = xrx200_probe,
-+	.remove = xrx200_remove,
-+	.driver = {
-+		.name = "lantiq,xrx200-net",
-+		.of_match_table = xrx200_match,
-+		.owner = THIS_MODULE,
-+	},
-+};
-+
-+module_platform_driver(xrx200_driver);
-+
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200_sw.h
-@@ -0,0 +1,1328 @@
-+/*
-+ *   This program is free software; you can redistribute it and/or modify it
-+ *   under the terms of the GNU General Public License version 2 as published
-+ *   by the Free Software Foundation.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ *   Copyright (C) 2010 Lantiq Deutschland GmbH
-+ *   Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com>
-+ *
-+ *   VR9 switch registers extracted from 310TUJ0 switch api
-+ *   WARNING mult values of 0x00 may not be correct
-+ *
-+ */
-+
-+enum {
-+//	XRX200_ETHSW_SWRES,            /* Ethernet Switch ResetControl Register */
-+//	XRX200_ETHSW_SWRES_R1,         /* Hardware Reset */
-+//	XRX200_ETHSW_SWRES_R0,         /* Register Configuration */
-+//	XRX200_ETHSW_CLK_MAC_GAT,      /* Ethernet Switch Clock ControlRegister  */
-+//	XRX200_ETHSW_CLK_EXP_SLEEP,    /* Exponent to put system into sleep */
-+//	XRX200_ETHSW_CLK_EXP_WAKE,     /* Exponent to wake up system */
-+//	XRX200_ETHSW_CLK_CLK2_EN,      /* CLK2 Input for MAC */
-+//	XRX200_ETHSW_CLK_EXT_DIV_EN,   /* External Clock Divider Enable */
-+//	XRX200_ETHSW_CLK_RAM_DBG_EN,   /* Clock Gating Enable */
-+//	XRX200_ETHSW_CLK_REG_GAT_EN,   /* Clock Gating Enable */
-+//	XRX200_ETHSW_CLK_GAT_EN,       /* Clock Gating Enable */
-+//	XRX200_ETHSW_CLK_MAC_GAT_EN,   /* Clock Gating Enable */
-+//	XRX200_ETHSW_DBG_STEP,         /* Ethernet Switch Debug ControlRegister */
-+//	XRX200_ETHSW_DBG_CLK_SEL,      /* Trigger Enable */
-+//	XRX200_ETHSW_DBG_MON_EN,       /* Monitoring Enable */
-+//	XRX200_ETHSW_DBG_TRIG_EN,      /* Trigger Enable */
-+//	XRX200_ETHSW_DBG_MODE,         /* Debug Mode */
-+//	XRX200_ETHSW_DBG_STEP_TIME,    /* Clock Step Size */
-+//	XRX200_ETHSW_SSB_MODE,         /* Ethernet Switch SharedSegment Buffer Mode Register */
-+//	XRX200_ETHSW_SSB_MODE_ADDE,    /* Memory Address */
-+//	XRX200_ETHSW_SSB_MODE_MODE,    /* Memory Access Mode */
-+//	XRX200_ETHSW_SSB_ADDR,         /* Ethernet Switch SharedSegment Buffer Address Register */
-+//	XRX200_ETHSW_SSB_ADDR_ADDE,    /* Memory Address */
-+//	XRX200_ETHSW_SSB_DATA,         /* Ethernet Switch SharedSegment Buffer Data Register */
-+//	XRX200_ETHSW_SSB_DATA_DATA,    /* Data Value */
-+//	XRX200_ETHSW_CAP_0,            /* Ethernet Switch CapabilityRegister 0 */
-+//	XRX200_ETHSW_CAP_0_SPEED,      /* Clock frequency */
-+//	XRX200_ETHSW_CAP_1,            /* Ethernet Switch CapabilityRegister 1 */
-+//	XRX200_ETHSW_CAP_1_GMAC,       /* MAC operation mode */
-+//	XRX200_ETHSW_CAP_1_QUEUE,      /* Number of queues */
-+//	XRX200_ETHSW_CAP_1_VPORTS,     /* Number of virtual ports */
-+//	XRX200_ETHSW_CAP_1_PPORTS,     /* Number of physical ports */
-+//	XRX200_ETHSW_CAP_2,            /* Ethernet Switch CapabilityRegister 2 */
-+//	XRX200_ETHSW_CAP_2_PACKETS,    /* Number of packets */
-+//	XRX200_ETHSW_CAP_3,            /* Ethernet Switch CapabilityRegister 3 */
-+//	XRX200_ETHSW_CAP_3_METERS,     /* Number of traffic meters */
-+//	XRX200_ETHSW_CAP_3_SHAPERS,    /* Number of traffic shapers */
-+//	XRX200_ETHSW_CAP_4,            /* Ethernet Switch CapabilityRegister 4 */
-+//	XRX200_ETHSW_CAP_4_PPPOE,      /* PPPoE table size */
-+//	XRX200_ETHSW_CAP_4_VLAN,       /* Active VLAN table size */
-+//	XRX200_ETHSW_CAP_5,            /* Ethernet Switch CapabilityRegister 5 */
-+//	XRX200_ETHSW_CAP_5_IPPLEN,     /* IP packet length table size */
-+//	XRX200_ETHSW_CAP_5_PROT,       /* Protocol table size */
-+//	XRX200_ETHSW_CAP_6,            /* Ethernet Switch CapabilityRegister 6 */
-+//	XRX200_ETHSW_CAP_6_MACDASA,    /* MAC DA/SA table size */
-+//	XRX200_ETHSW_CAP_6_APPL,       /* Application table size */
-+//	XRX200_ETHSW_CAP_7,            /* Ethernet Switch CapabilityRegister 7 */
-+//	XRX200_ETHSW_CAP_7_IPDASAM,    /* IP DA/SA MSB table size */
-+//	XRX200_ETHSW_CAP_7_IPDASAL,    /* IP DA/SA LSB table size */
-+//	XRX200_ETHSW_CAP_8,            /* Ethernet Switch CapabilityRegister 8 */
-+//	XRX200_ETHSW_CAP_8_MCAST,      /* Multicast table size */
-+//	XRX200_ETHSW_CAP_9,            /* Ethernet Switch CapabilityRegister 9 */
-+//	XRX200_ETHSW_CAP_9_FLAGG,      /* Flow Aggregation table size */
-+//	XRX200_ETHSW_CAP_10,           /* Ethernet Switch CapabilityRegister 10 */
-+//	XRX200_ETHSW_CAP_10_MACBT,     /* MAC bridging table size */
-+//	XRX200_ETHSW_CAP_11,           /* Ethernet Switch CapabilityRegister 11 */
-+//	XRX200_ETHSW_CAP_11_BSIZEL,    /* Packet buffer size (lower part, in byte) */
-+//	XRX200_ETHSW_CAP_12,           /* Ethernet Switch CapabilityRegister 12 */
-+//	XRX200_ETHSW_CAP_12_BSIZEH,    /* Packet buffer size (higher part, in byte) */
-+//	XRX200_ETHSW_VERSION_REV,      /* Ethernet Switch VersionRegister */
-+//	XRX200_ETHSW_VERSION_MOD_ID,   /* Module Identification */
-+//	XRX200_ETHSW_VERSION_REV_ID,   /* Hardware Revision Identification */
-+//	XRX200_ETHSW_IER,              /* Interrupt Enable Register */
-+//	XRX200_ETHSW_IER_FDMAIE,       /* Fetch DMA Interrupt Enable */
-+//	XRX200_ETHSW_IER_SDMAIE,       /* Store DMA Interrupt Enable */
-+//	XRX200_ETHSW_IER_MACIE,        /* Ethernet MAC Interrupt Enable */
-+//	XRX200_ETHSW_IER_PCEIE,        /* Parser and Classification Engine Interrupt Enable */
-+//	XRX200_ETHSW_IER_BMIE,         /* Buffer Manager Interrupt Enable */
-+//	XRX200_ETHSW_ISR,              /* Interrupt Status Register */
-+//	XRX200_ETHSW_ISR_FDMAINT,      /* Fetch DMA Interrupt */
-+//	XRX200_ETHSW_ISR_SDMAINT,      /* Store DMA Interrupt */
-+//	XRX200_ETHSW_ISR_MACINT,       /* Ethernet MAC Interrupt */
-+//	XRX200_ETHSW_ISR_PCEINT,       /* Parser and Classification Engine Interrupt */
-+//	XRX200_ETHSW_ISR_BMINT,        /* Buffer Manager Interrupt */
-+//	XRX200_ETHSW_SPARE_0,          /* Ethernet Switch SpareCells 0 */
-+//	XRX200_ETHSW_SPARE_0_SPARE,    /* SPARE0  */
-+//	XRX200_ETHSW_SPARE_1,          /* Ethernet Switch SpareCells 1 */
-+//	XRX200_ETHSW_SPARE_1_SPARE,    /* SPARE1  */
-+//	XRX200_ETHSW_SPARE_2,          /* Ethernet Switch SpareCells 2 */
-+//	XRX200_ETHSW_SPARE_2_SPARE,    /* SPARE2  */
-+//	XRX200_ETHSW_SPARE_3,          /* Ethernet Switch SpareCells 3 */
-+//	XRX200_ETHSW_SPARE_3_SPARE,    /* SPARE3  */
-+//	XRX200_ETHSW_SPARE_4,          /* Ethernet Switch SpareCells 4 */
-+//	XRX200_ETHSW_SPARE_4_SPARE,    /* SPARE4  */
-+//	XRX200_ETHSW_SPARE_5,          /* Ethernet Switch SpareCells 5 */
-+//	XRX200_ETHSW_SPARE_5_SPARE,    /* SPARE5  */
-+//	XRX200_ETHSW_SPARE_6,          /* Ethernet Switch SpareCells 6 */
-+//	XRX200_ETHSW_SPARE_6_SPARE,    /* SPARE6  */
-+//	XRX200_ETHSW_SPARE_7,          /* Ethernet Switch SpareCells 7 */
-+//	XRX200_ETHSW_SPARE_7_SPARE,    /* SPARE7  */
-+//	XRX200_ETHSW_SPARE_8,          /* Ethernet Switch SpareCells 8 */
-+//	XRX200_ETHSW_SPARE_8_SPARE,    /* SPARE8  */
-+//	XRX200_ETHSW_SPARE_9,          /* Ethernet Switch SpareCells 9 */
-+//	XRX200_ETHSW_SPARE_9_SPARE,    /* SPARE9  */
-+//	XRX200_ETHSW_SPARE_10,         /* Ethernet Switch SpareCells 10 */
-+//	XRX200_ETHSW_SPARE_10_SPARE,   /* SPARE10  */
-+//	XRX200_ETHSW_SPARE_11,         /* Ethernet Switch SpareCells 11 */
-+//	XRX200_ETHSW_SPARE_11_SPARE,   /* SPARE11  */
-+//	XRX200_ETHSW_SPARE_12,         /* Ethernet Switch SpareCells 12 */
-+//	XRX200_ETHSW_SPARE_12_SPARE,   /* SPARE12  */
-+//	XRX200_ETHSW_SPARE_13,         /* Ethernet Switch SpareCells 13 */
-+//	XRX200_ETHSW_SPARE_13_SPARE,   /* SPARE13  */
-+//	XRX200_ETHSW_SPARE_14,         /* Ethernet Switch SpareCells 14 */
-+//	XRX200_ETHSW_SPARE_14_SPARE,   /* SPARE14  */
-+//	XRX200_ETHSW_SPARE_15,         /* Ethernet Switch SpareCells 15 */
-+//	XRX200_ETHSW_SPARE_15_SPARE,   /* SPARE15  */
-+//	XRX200_BM_RAM_VAL_3,           /* RAM Value Register 3 */
-+//	XRX200_BM_RAM_VAL_3_VAL3,      /* Data value [15:0] */
-+//	XRX200_BM_RAM_VAL_2,           /* RAM Value Register 2 */
-+//	XRX200_BM_RAM_VAL_2_VAL2,      /* Data value [15:0] */
-+//	XRX200_BM_RAM_VAL_1,           /* RAM Value Register 1 */
-+//	XRX200_BM_RAM_VAL_1_VAL1,      /* Data value [15:0] */
-+//	XRX200_BM_RAM_VAL_0,           /* RAM Value Register 0 */
-+//	XRX200_BM_RAM_VAL_0_VAL0,      /* Data value [15:0] */
-+//	XRX200_BM_RAM_ADDR,            /* RAM Address Register */
-+//	XRX200_BM_RAM_ADDR_ADDR,       /* RAM Address */
-+//	XRX200_BM_RAM_CTRL,            /* RAM Access Control Register */
-+//	XRX200_BM_RAM_CTRL_BAS,        /* Access Busy/Access Start */
-+//	XRX200_BM_RAM_CTRL_OPMOD,      /* Lookup Table Access Operation Mode */
-+//	XRX200_BM_RAM_CTRL_ADDR,       /* Address for RAM selection */
-+//	XRX200_BM_FSQM_GCTRL,          /* Free Segment Queue ManagerGlobal Control Register */
-+//	XRX200_BM_FSQM_GCTRL_SEGNUM,   /* Maximum Segment Number */
-+//	XRX200_BM_CONS_SEG,            /* Number of Consumed SegmentsRegister */
-+//	XRX200_BM_CONS_SEG_FSEG,       /* Number of Consumed Segments */
-+//	XRX200_BM_CONS_PKT,            /* Number of Consumed PacketPointers Register */
-+//	XRX200_BM_CONS_PKT_FQP,        /* Number of Consumed Packet Pointers */
-+//	XRX200_BM_GCTRL_F,             /* Buffer Manager Global ControlRegister 0 */
-+//	XRX200_BM_GCTRL_BM_STA,        /* Buffer Manager Initialization Status Bit */
-+//	XRX200_BM_GCTRL_SAT,           /* RMON Counter Update Mode */
-+//	XRX200_BM_GCTRL_FR_RBC,        /* Freeze RMON RX Bad Byte 64 Bit Counter */
-+//	XRX200_BM_GCTRL_FR_RGC,        /* Freeze RMON RX Good Byte 64 Bit Counter */
-+//	XRX200_BM_GCTRL_FR_TGC,        /* Freeze RMON TX Good Byte 64 Bit Counter */
-+//	XRX200_BM_GCTRL_I_FIN,         /* RAM initialization finished */
-+//	XRX200_BM_GCTRL_CX_INI,        /* PQM Context RAM initialization */
-+//	XRX200_BM_GCTRL_FP_INI,        /* FPQM RAM initialization */
-+//	XRX200_BM_GCTRL_FS_INI,        /* FSQM RAM initialization */
-+//	XRX200_BM_GCTRL_R_SRES,        /* Software Reset for RMON */
-+//	XRX200_BM_GCTRL_S_SRES,        /* Software Reset for Scheduler */
-+//	XRX200_BM_GCTRL_A_SRES,        /* Software Reset for AVG */
-+//	XRX200_BM_GCTRL_P_SRES,        /* Software Reset for PQM */
-+//	XRX200_BM_GCTRL_F_SRES,        /* Software Reset for FSQM */
-+//	XRX200_BM_QUEUE_GCTRL,         /* Queue Manager GlobalControl Register 0 */
-+//	XRX200_BM_QUEUE_GCTRL_GL_MOD,  /* WRED Mode Signal */
-+//	XRX200_BM_QUEUE_GCTRL_AQUI,    /* Average Queue Update Interval */
-+//	XRX200_BM_QUEUE_GCTRL_AQWF,    /* Average Queue Weight Factor */
-+//	XRX200_BM_QUEUE_GCTRL_QAVGEN,  /* Queue Average Calculation Enable */
-+//	XRX200_BM_QUEUE_GCTRL_DPROB,   /* Drop Probability Profile */
-+//	XRX200_BM_WRED_RTH_0,          /* WRED Red Threshold Register0 */
-+//	XRX200_BM_WRED_RTH_0_MINTH,    /* Minimum Threshold */
-+//	XRX200_BM_WRED_RTH_1,          /* WRED Red Threshold Register1 */
-+//	XRX200_BM_WRED_RTH_1_MAXTH,    /* Maximum Threshold */
-+//	XRX200_BM_WRED_YTH_0,          /* WRED Yellow ThresholdRegister 0 */
-+//	XRX200_BM_WRED_YTH_0_MINTH,    /* Minimum Threshold */
-+//	XRX200_BM_WRED_YTH_1,          /* WRED Yellow ThresholdRegister 1 */
-+//	XRX200_BM_WRED_YTH_1_MAXTH,    /* Maximum Threshold */
-+//	XRX200_BM_WRED_GTH_0,          /* WRED Green ThresholdRegister 0 */
-+//	XRX200_BM_WRED_GTH_0_MINTH,    /* Minimum Threshold */
-+//	XRX200_BM_WRED_GTH_1,          /* WRED Green ThresholdRegister 1 */
-+//	XRX200_BM_WRED_GTH_1_MAXTH,    /* Maximum Threshold */
-+//	XRX200_BM_DROP_GTH_0_THR,      /* Drop Threshold ConfigurationRegister 0 */
-+//	XRX200_BM_DROP_GTH_0_THR_FQ,   /* Threshold for frames marked red */
-+//	XRX200_BM_DROP_GTH_1_THY,      /* Drop Threshold ConfigurationRegister 1 */
-+//	XRX200_BM_DROP_GTH_1_THY_FQ,   /* Threshold for frames marked yellow */
-+//	XRX200_BM_DROP_GTH_2_THG,      /* Drop Threshold ConfigurationRegister 2 */
-+//	XRX200_BM_DROP_GTH_2_THG_FQ,   /* Threshold for frames marked green */
-+//	XRX200_BM_IER,                 /* Buffer Manager Global InterruptEnable Register */
-+//	XRX200_BM_IER_CNT4,            /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
-+//	XRX200_BM_IER_CNT3,            /* Counter Group 3 (RMON-PQM) Interrupt Enable */
-+//	XRX200_BM_IER_CNT2,            /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
-+//	XRX200_BM_IER_CNT1,            /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */
-+//	XRX200_BM_IER_CNT0,            /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */
-+//	XRX200_BM_IER_DEQ,             /* PQM dequeue Interrupt Enable */
-+//	XRX200_BM_IER_ENQ,             /* PQM Enqueue Interrupt Enable */
-+//	XRX200_BM_IER_FSQM,            /* Buffer Empty Interrupt Enable */
-+//	XRX200_BM_ISR,                 /* Buffer Manager Global InterruptStatus Register */
-+//	XRX200_BM_ISR_CNT4,            /* Counter Group 4 Interrupt */
-+//	XRX200_BM_ISR_CNT3,            /* Counter Group 3 Interrupt */
-+//	XRX200_BM_ISR_CNT2,            /* Counter Group 2 Interrupt */
-+//	XRX200_BM_ISR_CNT1,            /* Counter Group 1 Interrupt */
-+//	XRX200_BM_ISR_CNT0,            /* Counter Group 0 Interrupt */
-+//	XRX200_BM_ISR_DEQ,             /* PQM dequeue Interrupt Enable */
-+//	XRX200_BM_ISR_ENQ,             /* PQM Enqueue Interrupt */
-+//	XRX200_BM_ISR_FSQM,            /* Buffer Empty Interrupt */
-+//	XRX200_BM_CISEL,               /* Buffer Manager RMON CounterInterrupt Select Register */
-+//	XRX200_BM_CISEL_PORT,          /* Port Number */
-+//	XRX200_BM_DEBUG_CTRL_DBG,      /* Debug Control Register */
-+//	XRX200_BM_DEBUG_CTRL_DBG_SEL,  /* Select Signal for Debug Multiplexer */
-+//	XRX200_BM_DEBUG_VAL_DBG,       /* Debug Value Register */
-+//	XRX200_BM_DEBUG_VAL_DBG_DAT,   /* Debug Data Value */
-+//	XRX200_BM_PCFG,                /* Buffer Manager PortConfiguration Register */
-+//	XRX200_BM_PCFG_CNTEN,          /* RMON Counter Enable */
-+//	XRX200_BM_RMON_CTRL_RAM1,      /* Buffer ManagerRMON Control Register */
-+//	XRX200_BM_RMON_CTRL_RAM2_RES,  /* Software Reset for RMON RAM2 */
-+//	XRX200_BM_RMON_CTRL_RAM1_RES,  /* Software Reset for RMON RAM1 */
-+//	XRX200_PQM_DP,                 /* Packet Queue ManagerDrop Probability Register */
-+//	XRX200_PQM_DP_DPROB,           /* Drop Probability Profile */
-+//	XRX200_PQM_RS,                 /* Packet Queue ManagerRate Shaper Assignment Register */
-+//	XRX200_PQM_RS_EN2,             /* Rate Shaper 2 Enable */
-+//	XRX200_PQM_RS_RS2,             /* Rate Shaper 2 */
-+//	XRX200_PQM_RS_EN1,             /* Rate Shaper 1 Enable */
-+//	XRX200_PQM_RS_RS1,             /* Rate Shaper 1 */
-+//	XRX200_RS_CTRL,                /* Rate Shaper ControlRegister */
-+//	XRX200_RS_CTRL_RSEN,           /* Rate Shaper Enable */
-+//	XRX200_RS_CBS,                 /* Rate Shaper CommittedBurst Size Register */
-+//	XRX200_RS_CBS_CBS,             /* Committed Burst Size */
-+//	XRX200_RS_IBS,                 /* Rate Shaper InstantaneousBurst Size Register */
-+//	XRX200_RS_IBS_IBS,             /* Instantaneous Burst Size */
-+//	XRX200_RS_CIR_EXP,             /* Rate Shaper RateExponent Register */
-+//	XRX200_RS_CIR_EXP_EXP,         /* Exponent */
-+//	XRX200_RS_CIR_MANT,            /* Rate Shaper RateMantissa Register */
-+//	XRX200_RS_CIR_MANT_MANT,       /* Mantissa */
-+	XRX200_PCE_TBL_KEY_7,          /* Table Key Data 7 */
-+//	XRX200_PCE_TBL_KEY_7_KEY7,     /* Key Value[15:0] */
-+	XRX200_PCE_TBL_KEY_6,          /* Table Key Data 6 */
-+//	XRX200_PCE_TBL_KEY_6_KEY6,     /* Key Value[15:0] */
-+	XRX200_PCE_TBL_KEY_5,          /* Table Key Data 5 */
-+//	XRX200_PCE_TBL_KEY_5_KEY5,     /* Key Value[15:0] */
-+	XRX200_PCE_TBL_KEY_4,          /* Table Key Data 4 */
-+//	XRX200_PCE_TBL_KEY_4_KEY4,     /* Key Value[15:0] */
-+	XRX200_PCE_TBL_KEY_3,          /* Table Key Data 3 */
-+//	XRX200_PCE_TBL_KEY_3_KEY3,     /* Key Value[15:0] */
-+	XRX200_PCE_TBL_KEY_2,          /* Table Key Data 2 */
-+//	XRX200_PCE_TBL_KEY_2_KEY2,     /* Key Value[15:0] */
-+	XRX200_PCE_TBL_KEY_1,          /* Table Key Data 1 */
-+//	XRX200_PCE_TBL_KEY_1_KEY1,     /* Key Value[31:16] */
-+	XRX200_PCE_TBL_KEY_0,          /* Table Key Data 0 */
-+//	XRX200_PCE_TBL_KEY_0_KEY0,     /* Key Value[15:0] */
-+	XRX200_PCE_TBL_MASK_0,         /* Table Mask Write Register0 */
-+//	XRX200_PCE_TBL_MASK_0_MASK0,   /* Mask Pattern [15:0] */
-+	XRX200_PCE_TBL_VAL_4,          /* Table Value Register4 */
-+//	XRX200_PCE_TBL_VAL_4_VAL4,     /* Data value [15:0] */
-+	XRX200_PCE_TBL_VAL_3,          /* Table Value Register3 */
-+//	XRX200_PCE_TBL_VAL_3_VAL3,     /* Data value [15:0] */
-+	XRX200_PCE_TBL_VAL_2,          /* Table Value Register2 */
-+//	XRX200_PCE_TBL_VAL_2_VAL2,     /* Data value [15:0] */
-+	XRX200_PCE_TBL_VAL_1,          /* Table Value Register1 */
-+//	XRX200_PCE_TBL_VAL_1_VAL1,     /* Data value [15:0] */
-+	XRX200_PCE_TBL_VAL_0,          /* Table Value Register0 */
-+//	XRX200_PCE_TBL_VAL_0_VAL0,     /* Data value [15:0] */
-+//	XRX200_PCE_TBL_ADDR,           /* Table Entry AddressRegister */
-+	XRX200_PCE_TBL_ADDR_ADDR,      /* Table Address */
-+//	XRX200_PCE_TBL_CTRL,           /* Table Access ControlRegister */
-+	XRX200_PCE_TBL_CTRL_BAS,       /* Access Busy/Access Start */
-+	XRX200_PCE_TBL_CTRL_TYPE,      /* Lookup Entry Type */
-+	XRX200_PCE_TBL_CTRL_VLD,       /* Lookup Entry Valid */
-+	XRX200_PCE_TBL_CTRL_GMAP,      /* Group Map */
-+	XRX200_PCE_TBL_CTRL_OPMOD,     /* Lookup Table Access Operation Mode */
-+	XRX200_PCE_TBL_CTRL_ADDR,      /* Lookup Table Address */
-+//	XRX200_PCE_TBL_STAT,           /* Table General StatusRegister */
-+//	XRX200_PCE_TBL_STAT_TBUSY,     /* Table Access Busy */
-+//	XRX200_PCE_TBL_STAT_TEMPT,     /* Table Empty */
-+//	XRX200_PCE_TBL_STAT_TFUL,      /* Table Full */
-+//	XRX200_PCE_AGE_0,              /* Aging Counter ConfigurationRegister 0 */
-+//	XRX200_PCE_AGE_0_EXP,          /* Aging Counter Exponent Value  */
-+//	XRX200_PCE_AGE_1,              /* Aging Counter ConfigurationRegister 1 */
-+//	XRX200_PCE_AGE_1_MANT,         /* Aging Counter Mantissa Value  */
-+//	XRX200_PCE_PMAP_1,             /* Port Map Register 1 */
-+//	XRX200_PCE_PMAP_1_MPMAP,       /* Monitoring Port Map */
-+//	XRX200_PCE_PMAP_2,             /* Port Map Register 2 */
-+//	XRX200_PCE_PMAP_2_DMCPMAP,     /* Default Multicast Port Map */
-+//	XRX200_PCE_PMAP_3,             /* Port Map Register 3 */
-+//	XRX200_PCE_PMAP_3_UUCMAP,      /* Default Unknown Unicast Port Map */
-+//	XRX200_PCE_GCTRL_0,            /* PCE Global Control Register0 */
-+//	XRX200_PCE_GCTRL_0_IGMP,       /* IGMP Mode Selection */
-+	XRX200_PCE_GCTRL_0_VLAN,       /* VLAN-aware Switching */
-+//	XRX200_PCE_GCTRL_0_NOPM,       /* No Port Map Forwarding */
-+//	XRX200_PCE_GCTRL_0_SCONUC,     /* Unknown Unicast Storm Control */
-+//	XRX200_PCE_GCTRL_0_SCONMC,     /* Multicast Storm Control */
-+//	XRX200_PCE_GCTRL_0_SCONBC,     /* Broadcast Storm Control */
-+//	XRX200_PCE_GCTRL_0_SCONMOD,    /* Storm Control Mode */
-+//	XRX200_PCE_GCTRL_0_SCONMET,    /* Storm Control Metering Instance */
-+//	XRX200_PCE_GCTRL_0_MC_VALID,   /* Access Request */
-+//	XRX200_PCE_GCTRL_0_PLCKMOD,    /* Port Lock Mode */
-+//	XRX200_PCE_GCTRL_0_PLIMMOD,    /* MAC Address Learning Limitation Mode */
-+//	XRX200_PCE_GCTRL_0_MTFL,       /* MAC Table Flushing */
-+//	XRX200_PCE_GCTRL_1,            /* PCE Global Control Register1 */
-+//	XRX200_PCE_GCTRL_1_PCE_DIS,    /* PCE Disable after currently processed packet */
-+//	XRX200_PCE_GCTRL_1_LRNMOD,     /* MAC Address Learning Mode */
-+//	XRX200_PCE_TCM_GLOB_CTRL,      /* Three-color MarkerGlobal Control Register */
-+//	XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */
-+//	XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */
-+//	XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */
-+//	XRX200_PCE_IGMP_CTRL,          /* IGMP Control Register */
-+//	XRX200_PCE_IGMP_CTRL_FAGEEN,   /* Force Aging of Table Entries Enable */
-+//	XRX200_PCE_IGMP_CTRL_FLEAVE,   /* Fast Leave Enable */
-+//	XRX200_PCE_IGMP_CTRL_DMRTEN,   /* Default Maximum Response Time Enable */
-+//	XRX200_PCE_IGMP_CTRL_JASUP,    /* Join Aggregation Suppression Enable */
-+//	XRX200_PCE_IGMP_CTRL_REPSUP,   /* Report Suppression Enable */
-+//	XRX200_PCE_IGMP_CTRL_SRPEN,    /* Snooping of Router Port Enable */
-+//	XRX200_PCE_IGMP_CTRL_ROB,      /* Robustness Variable */
-+//	XRX200_PCE_IGMP_CTRL_DMRT,     /* IGMP Default Maximum Response Time */
-+//	XRX200_PCE_IGMP_DRPM,          /* IGMP Default RouterPort Map Register */
-+//	XRX200_PCE_IGMP_DRPM_DRPM,     /* IGMP Default Router Port Map */
-+//	XRX200_PCE_IGMP_AGE_0,         /* IGMP Aging Register0 */
-+//	XRX200_PCE_IGMP_AGE_0_MANT,    /* IGMP Group Aging Time Mantissa */
-+//	XRX200_PCE_IGMP_AGE_0_EXP,     /* IGMP Group Aging Time Exponent */
-+//	XRX200_PCE_IGMP_AGE_1,         /* IGMP Aging Register1 */
-+//	XRX200_PCE_IGMP_AGE_1_MANT,    /* IGMP Router Port Aging Time Mantissa */
-+//	XRX200_PCE_IGMP_STAT,          /* IGMP Status Register */
-+//	XRX200_PCE_IGMP_STAT_IGPM,     /* IGMP Port Map */
-+//	XRX200_WOL_GLB_CTRL,           /* Wake-on-LAN ControlRegister */
-+//	XRX200_WOL_GLB_CTRL_PASSEN,    /* WoL Password Enable */
-+//	XRX200_WOL_DA_0,               /* Wake-on-LAN DestinationAddress Register 0 */
-+//	XRX200_WOL_DA_0_DA0,           /* WoL Destination Address [15:0] */
-+//	XRX200_WOL_DA_1,               /* Wake-on-LAN DestinationAddress Register 1 */
-+//	XRX200_WOL_DA_1_DA1,           /* WoL Destination Address [31:16] */
-+//	XRX200_WOL_DA_2,               /* Wake-on-LAN DestinationAddress Register 2 */
-+//	XRX200_WOL_DA_2_DA2,           /* WoL Destination Address [47:32] */
-+//	XRX200_WOL_PW_0,               /* Wake-on-LAN Password Register0 */
-+//	XRX200_WOL_PW_0_PW0,           /* WoL Password [15:0] */
-+//	XRX200_WOL_PW_1,               /* Wake-on-LAN Password Register1 */
-+//	XRX200_WOL_PW_1_PW1,           /* WoL Password [31:16] */
-+//	XRX200_WOL_PW_2,               /* Wake-on-LAN Password Register2 */
-+//	XRX200_WOL_PW_2_PW2,           /* WoL Password [47:32] */
-+//	XRX200_PCE_IER_0_PINT,         /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */
-+//	XRX200_PCE_IER_0_PINT_15,      /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_14,      /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_13,      /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_12,      /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_11,      /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_10,      /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_9,       /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_8,       /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_7,       /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_6,       /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_5,       /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_4,       /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_3,       /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_2,       /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_1,       /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_0_PINT_0,       /* Port Interrupt Enable */
-+//	XRX200_PCE_IER_1,              /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */
-+//	XRX200_PCE_IER_1_FLOWINT,      /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */
-+//	XRX200_PCE_IER_1_CPH2,         /* Classification Phase 2 Ready Interrupt Enable */
-+//	XRX200_PCE_IER_1_CPH1,         /* Classification Phase 1 Ready Interrupt Enable */
-+//	XRX200_PCE_IER_1_CPH0,         /* Classification Phase 0 Ready Interrupt Enable */
-+//	XRX200_PCE_IER_1_PRDY,         /* Parser Ready Interrupt Enable */
-+//	XRX200_PCE_IER_1_IGTF,         /* IGMP Table Full Interrupt Enable */
-+//	XRX200_PCE_IER_1_MTF,          /* MAC Table Full Interrupt Enable */
-+//	XRX200_PCE_ISR_0_PINT,         /* Parser and ClassificationEngine Global Interrupt Status Register 0 */
-+//	XRX200_PCE_ISR_0_PINT_15,      /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_14,      /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_13,      /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_12,      /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_11,      /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_10,      /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_9,       /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_8,       /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_7,       /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_6,       /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_5,       /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_4,       /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_3,       /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_2,       /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_1,       /* Port Interrupt */
-+//	XRX200_PCE_ISR_0_PINT_0,       /* Port Interrupt */
-+//	XRX200_PCE_ISR_1,              /* Parser and ClassificationEngine Global Interrupt Status Register 1 */
-+//	XRX200_PCE_ISR_1_FLOWINT,      /* Traffic Flow Table Interrupt Rule matched */
-+//	XRX200_PCE_ISR_1_CPH2,         /* Classification Phase 2 Ready Interrupt */
-+//	XRX200_PCE_ISR_1_CPH1,         /* Classification Phase 1 Ready Interrupt */
-+//	XRX200_PCE_ISR_1_CPH0,         /* Classification Phase 0 Ready Interrupt */
-+//	XRX200_PCE_ISR_1_PRDY,         /* Parser Ready Interrupt */
-+//	XRX200_PCE_ISR_1_IGTF,         /* IGMP Table Full Interrupt */
-+//	XRX200_PCE_ISR_1_MTF,          /* MAC Table Full Interrupt */
-+//	XRX200_PARSER_STAT_FIFO,       /* Parser Status Register */
-+//	XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */
-+//	XRX200_PARSER_STAT_FSM_STATE,  /* Parser FSM State */
-+//	XRX200_PARSER_STAT_PKT_ERR,    /* Packet error detected */
-+//	XRX200_PARSER_STAT_FSM_FIN,    /* Parser FSM finished */
-+//	XRX200_PARSER_STAT_FSM_START,  /* Parser FSM start */
-+//	XRX200_PARSER_STAT_FIFO_RDY,   /* Parser FIFO ready for read. */
-+//	XRX200_PARSER_STAT_FIFO_FULL,  /* Parser */
-+//	XRX200_PCE_PCTRL_0,            /* PCE Port ControlRegister 0 */
-+//	XRX200_PCE_PCTRL_0_MCST,       /* Multicast Forwarding Mode Selection */
-+//	XRX200_PCE_PCTRL_0_EGSTEN,     /* Table-based Egress Special Tag Enable */
-+//	XRX200_PCE_PCTRL_0_IGSTEN,     /* Ingress Special Tag Enable */
-+//	XRX200_PCE_PCTRL_0_PCPEN,      /* PCP Remarking Mode */
-+//	XRX200_PCE_PCTRL_0_CLPEN,      /* Class Remarking Mode */
-+//	XRX200_PCE_PCTRL_0_DPEN,       /* Drop Precedence Remarking Mode */
-+//	XRX200_PCE_PCTRL_0_CMOD,       /* Three-color Marker Color Mode */
-+//	XRX200_PCE_PCTRL_0_VREP,       /* VLAN Replacement Mode */
-+	XRX200_PCE_PCTRL_0_TVM,        /* Transparent VLAN Mode */
-+//	XRX200_PCE_PCTRL_0_PLOCK,      /* Port Locking Enable */
-+//	XRX200_PCE_PCTRL_0_AGEDIS,     /* Aging Disable */
-+//	XRX200_PCE_PCTRL_0_PSTATE,     /* Port State */
-+//	XRX200_PCE_PCTRL_1,            /* PCE Port ControlRegister 1 */
-+//	XRX200_PCE_PCTRL_1_LRNLIM,     /* MAC Address Learning Limit */
-+//	XRX200_PCE_PCTRL_2,            /* PCE Port ControlRegister 2 */
-+//	XRX200_PCE_PCTRL_2_DSCPMOD,    /* DSCP Mode Selection */
-+//	XRX200_PCE_PCTRL_2_DSCP,       /* Enable DSCP to select the Class of Service */
-+//	XRX200_PCE_PCTRL_2_PCP,        /* Enable VLAN PCP to select the Class of Service */
-+//	XRX200_PCE_PCTRL_2_PCLASS,     /* Port-based Traffic Class */
-+//	XRX200_PCE_PCTRL_3_VIO,        /* PCE Port ControlRegister 3 */
-+//	XRX200_PCE_PCTRL_3_EDIR,       /* Egress Redirection Mode */
-+//	XRX200_PCE_PCTRL_3_RXDMIR,     /* Receive Mirroring Enable for dropped frames */
-+//	XRX200_PCE_PCTRL_3_RXVMIR,     /* Receive Mirroring Enable for valid frames */
-+//	XRX200_PCE_PCTRL_3_TXMIR,      /* Transmit Mirroring Enable */
-+//	XRX200_PCE_PCTRL_3_VIO_7,      /* Violation Type 7 Mirroring Enable */
-+//	XRX200_PCE_PCTRL_3_VIO_6,      /* Violation Type 6 Mirroring Enable */
-+//	XRX200_PCE_PCTRL_3_VIO_5,      /* Violation Type 5 Mirroring Enable */
-+//	XRX200_PCE_PCTRL_3_VIO_4,      /* Violation Type 4 Mirroring Enable */
-+//	XRX200_PCE_PCTRL_3_VIO_3,      /* Violation Type 3 Mirroring Enable */
-+//	XRX200_PCE_PCTRL_3_VIO_2,      /* Violation Type 2 Mirroring Enable */
-+//	XRX200_PCE_PCTRL_3_VIO_1,      /* Violation Type 1 Mirroring Enable */
-+//	XRX200_PCE_PCTRL_3_VIO_0,      /* Violation Type 0 Mirroring Enable */
-+//	XRX200_WOL_CTRL,               /* Wake-on-LAN ControlRegister */
-+//	XRX200_WOL_CTRL_PORT,          /* WoL Enable */
-+//	XRX200_PCE_VCTRL,              /* PCE VLAN ControlRegister */
-+	XRX200_PCE_VCTRL_VSR,          /* VLAN Security Rule */
-+	XRX200_PCE_VCTRL_VEMR,         /* VLAN Egress Member Violation Rule */
-+	XRX200_PCE_VCTRL_VIMR,         /* VLAN Ingress Member Violation Rule */
-+	XRX200_PCE_VCTRL_VINR,         /* VLAN Ingress Tag Rule */
-+	XRX200_PCE_VCTRL_UVR,          /* Unknown VLAN Rule */
-+//	XRX200_PCE_DEFPVID,            /* PCE Default PortVID Register */
-+	XRX200_PCE_DEFPVID_PVID,       /* Default Port VID Index */
-+//	XRX200_PCE_PSTAT,              /* PCE Port StatusRegister */
-+//	XRX200_PCE_PSTAT_LRNCNT,       /* Learning Count */
-+//	XRX200_PCE_PIER,               /* Parser and ClassificationEngine Port Interrupt Enable Register */
-+//	XRX200_PCE_PIER_CLDRP,         /* Classification Drop Interrupt Enable */
-+//	XRX200_PCE_PIER_PTDRP,         /* Port Drop Interrupt Enable */
-+//	XRX200_PCE_PIER_VLAN,          /* VLAN Violation Interrupt Enable */
-+//	XRX200_PCE_PIER_WOL,           /* Wake-on-LAN Interrupt Enable */
-+//	XRX200_PCE_PIER_LOCK,          /* Port Limit Alert Interrupt Enable */
-+//	XRX200_PCE_PIER_LIM,           /* Port Lock Alert Interrupt Enable */
-+//	XRX200_PCE_PISR,               /* Parser and ClassificationEngine Port Interrupt Status Register */
-+//	XRX200_PCE_PISR_CLDRP,         /* Classification Drop Interrupt */
-+//	XRX200_PCE_PISR_PTDRP,         /* Port Drop Interrupt */
-+//	XRX200_PCE_PISR_VLAN,          /* VLAN Violation Interrupt */
-+//	XRX200_PCE_PISR_WOL,           /* Wake-on-LAN Interrupt */
-+//	XRX200_PCE_PISR_LOCK,          /* Port Lock Alert Interrupt */
-+//	XRX200_PCE_PISR_LIMIT,         /* Port Limitation Alert Interrupt */
-+//	XRX200_PCE_TCM_CTRL,           /* Three-colorMarker Control Register */
-+//	XRX200_PCE_TCM_CTRL_TCMEN,     /* Three-color Marker metering instance enable */
-+//	XRX200_PCE_TCM_STAT,           /* Three-colorMarker Status Register */
-+//	XRX200_PCE_TCM_STAT_AL1,       /* Three-color Marker Alert 1 Status */
-+//	XRX200_PCE_TCM_STAT_AL0,       /* Three-color Marker Alert 0 Status */
-+//	XRX200_PCE_TCM_CBS,            /* Three-color MarkerCommitted Burst Size Register */
-+//	XRX200_PCE_TCM_CBS_CBS,        /* Committed Burst Size */
-+//	XRX200_PCE_TCM_EBS,            /* Three-color MarkerExcess Burst Size Register */
-+//	XRX200_PCE_TCM_EBS_EBS,        /* Excess Burst Size */
-+//	XRX200_PCE_TCM_IBS,            /* Three-color MarkerInstantaneous Burst Size Register */
-+//	XRX200_PCE_TCM_IBS_IBS,        /* Instantaneous Burst Size */
-+//	XRX200_PCE_TCM_CIR_MANT,       /* Three-colorMarker Constant Information Rate Mantissa Register */
-+//	XRX200_PCE_TCM_CIR_MANT_MANT,  /* Rate Counter Mantissa */
-+//	XRX200_PCE_TCM_CIR_EXP,        /* Three-colorMarker Constant Information Rate Exponent Register */
-+//	XRX200_PCE_TCM_CIR_EXP_EXP,    /* Rate Counter Exponent */
-+//	XRX200_MAC_TEST,               /* MAC Test Register */
-+//	XRX200_MAC_TEST_JTP,           /* Jitter Test Pattern */
-+//	XRX200_MAC_PFAD_CFG,           /* MAC Pause FrameSource Address Configuration Register */
-+//	XRX200_MAC_PFAD_CFG_SAMOD,     /* Source Address Mode */
-+//	XRX200_MAC_PFSA_0,             /* Pause Frame SourceAddress Part 0  */
-+//	XRX200_MAC_PFSA_0_PFAD,        /* Pause Frame Source Address Part 0 */
-+//	XRX200_MAC_PFSA_1,             /* Pause Frame SourceAddress Part 1  */
-+//	XRX200_MAC_PFSA_1_PFAD,        /* Pause Frame Source Address Part 1 */
-+//	XRX200_MAC_PFSA_2,             /* Pause Frame SourceAddress Part 2  */
-+//	XRX200_MAC_PFSA_2_PFAD,        /* Pause Frame Source Address Part 2 */
-+//	XRX200_MAC_FLEN,               /* MAC Frame Length Register */
-+//	XRX200_MAC_FLEN_LEN,           /* Maximum Frame Length */
-+//	XRX200_MAC_VLAN_ETYPE_0,       /* MAC VLAN EthertypeRegister 0 */
-+//	XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */
-+//	XRX200_MAC_VLAN_ETYPE_1,       /* MAC VLAN EthertypeRegister 1 */
-+//	XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */
-+//	XRX200_MAC_IER,                /* MAC Interrupt EnableRegister */
-+//	XRX200_MAC_IER_MACIEN,         /* MAC Interrupt Enable */
-+//	XRX200_MAC_ISR,                /* MAC Interrupt StatusRegister */
-+//	XRX200_MAC_ISR_MACINT,         /* MAC Interrupt */
-+//	XRX200_MAC_PSTAT,              /* MAC Port Status Register */
-+//	XRX200_MAC_PSTAT_PACT,         /* PHY Active Status */
-+	XRX200_MAC_PSTAT_GBIT,         /* Gigabit Speed Status */
-+	XRX200_MAC_PSTAT_MBIT,         /* Megabit Speed Status */
-+	XRX200_MAC_PSTAT_FDUP,         /* Full Duplex Status */
-+//	XRX200_MAC_PSTAT_RXPAU,        /* Receive Pause Status */
-+//	XRX200_MAC_PSTAT_TXPAU,        /* Transmit Pause Status */
-+//	XRX200_MAC_PSTAT_RXPAUEN,      /* Receive Pause Enable Status */
-+//	XRX200_MAC_PSTAT_TXPAUEN,      /* Transmit Pause Enable Status */
-+	XRX200_MAC_PSTAT_LSTAT,        /* Link Status */
-+//	XRX200_MAC_PSTAT_CRS,          /* Carrier Sense Status */
-+//	XRX200_MAC_PSTAT_TXLPI,        /* Transmit Low-power Idle Status */
-+//	XRX200_MAC_PSTAT_RXLPI,        /* Receive Low-power Idle Status */
-+//	XRX200_MAC_PISR,               /* MAC Interrupt Status Register */
-+//	XRX200_MAC_PISR_PACT,          /* PHY Active Status */
-+//	XRX200_MAC_PISR_SPEED,         /* Megabit Speed Status */
-+//	XRX200_MAC_PISR_FDUP,          /* Full Duplex Status */
-+//	XRX200_MAC_PISR_RXPAUEN,       /* Receive Pause Enable Status */
-+//	XRX200_MAC_PISR_TXPAUEN,       /* Transmit Pause Enable Status */
-+//	XRX200_MAC_PISR_LPIOFF,        /* Receive Low-power Idle Mode is left */
-+//	XRX200_MAC_PISR_LPION,         /* Receive Low-power Idle Mode is entered */
-+//	XRX200_MAC_PISR_JAM,           /* Jam Status Detected */
-+//	XRX200_MAC_PISR_TOOSHORT,      /* Too Short Frame Error Detected */
-+//	XRX200_MAC_PISR_TOOLONG,       /* Too Long Frame Error Detected */
-+//	XRX200_MAC_PISR_LENERR,        /* Length Mismatch Error Detected */
-+//	XRX200_MAC_PISR_FCSERR,        /* Frame Checksum Error Detected */
-+//	XRX200_MAC_PISR_TXPAUSE,       /* Pause Frame Transmitted */
-+//	XRX200_MAC_PISR_RXPAUSE,       /* Pause Frame Received */
-+//	XRX200_MAC_PIER,               /* MAC Interrupt Enable Register */
-+//	XRX200_MAC_PIER_PACT,          /* PHY Active Status */
-+//	XRX200_MAC_PIER_SPEED,         /* Megabit Speed Status */
-+//	XRX200_MAC_PIER_FDUP,          /* Full Duplex Status */
-+//	XRX200_MAC_PIER_RXPAUEN,       /* Receive Pause Enable Status */
-+//	XRX200_MAC_PIER_TXPAUEN,       /* Transmit Pause Enable Status */
-+//	XRX200_MAC_PIER_LPIOFF,        /* Low-power Idle Off Interrupt Mask */
-+//	XRX200_MAC_PIER_LPION,         /* Low-power Idle On Interrupt Mask */
-+//	XRX200_MAC_PIER_JAM,           /* Jam Status Interrupt Mask */
-+//	XRX200_MAC_PIER_TOOSHORT,      /* Too Short Frame Error Interrupt Mask */
-+//	XRX200_MAC_PIER_TOOLONG,       /* Too Long Frame Error Interrupt Mask */
-+//	XRX200_MAC_PIER_LENERR,        /* Length Mismatch Error Interrupt Mask */
-+//	XRX200_MAC_PIER_FCSERR,        /* Frame Checksum Error Interrupt Mask */
-+//	XRX200_MAC_PIER_TXPAUSE,       /* Transmit Pause Frame Interrupt Mask */
-+//	XRX200_MAC_PIER_RXPAUSE,       /* Receive Pause Frame Interrupt Mask */
-+//	XRX200_MAC_CTRL_0,             /* MAC Control Register0 */
-+//	XRX200_MAC_CTRL_0_LCOL,        /* Late Collision Control */
-+//	XRX200_MAC_CTRL_0_BM,          /* Burst Mode Control */
-+//	XRX200_MAC_CTRL_0_APADEN,      /* Automatic VLAN Padding Enable */
-+//	XRX200_MAC_CTRL_0_VPAD2EN,     /* Stacked VLAN Padding Enable */
-+//	XRX200_MAC_CTRL_0_VPADEN,      /* VLAN Padding Enable */
-+//	XRX200_MAC_CTRL_0_PADEN,       /* Padding Enable */
-+//	XRX200_MAC_CTRL_0_FCS,         /* Transmit FCS Control */
-+	XRX200_MAC_CTRL_0_FCON,        /* Flow Control Mode */
-+//	XRX200_MAC_CTRL_0_FDUP,        /* Full Duplex Control */
-+//	XRX200_MAC_CTRL_0_GMII,        /* GMII/MII interface mode selection */
-+//	XRX200_MAC_CTRL_1,             /* MAC Control Register1 */
-+//	XRX200_MAC_CTRL_1_SHORTPRE,    /* Short Preamble Control */
-+//	XRX200_MAC_CTRL_1_IPG,         /* Minimum Inter Packet Gap Size */
-+//	XRX200_MAC_CTRL_2,             /* MAC Control Register2 */
-+//	XRX200_MAC_CTRL_2_MLEN,        /* Maximum Untagged Frame Length */
-+//	XRX200_MAC_CTRL_2_LCHKL,       /* Frame Length Check Long Enable */
-+//	XRX200_MAC_CTRL_2_LCHKS,       /* Frame Length Check Short Enable */
-+//	XRX200_MAC_CTRL_3,             /* MAC Control Register3 */
-+//	XRX200_MAC_CTRL_3_RCNT,        /* Retry Count */
-+//	XRX200_MAC_CTRL_4,             /* MAC Control Register4 */
-+//	XRX200_MAC_CTRL_4_LPIEN,       /* LPI Mode Enable */
-+//	XRX200_MAC_CTRL_4_WAIT,        /* LPI Wait Time */
-+//	XRX200_MAC_CTRL_5_PJPS,        /* MAC Control Register5 */
-+//	XRX200_MAC_CTRL_5_PJPS_NOBP,   /* Prolonged Jam pattern size during no-backpressure state */
-+//	XRX200_MAC_CTRL_5_PJPS_BP,     /* Prolonged Jam pattern size during backpressure state */
-+//	XRX200_MAC_CTRL_6_XBUF,        /* Transmit and ReceiveBuffer Control Register */
-+//	XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */
-+//	XRX200_MAC_CTRL_6_RBUF_INIT,   /* Receive Buffer Initialization */
-+//	XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */
-+//	XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */
-+//	XRX200_MAC_CTRL_6_XBUF_INIT,   /* Initialize the Transmit Buffer */
-+//	XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */
-+//	XRX200_MAC_BUFST_XBUF,         /* MAC Receive and TransmitBuffer Status Register */
-+//	XRX200_MAC_BUFST_RBUF_UFL,     /* Receive Buffer Underflow Indicator */
-+//	XRX200_MAC_BUFST_RBUF_OFL,     /* Receive Buffer Overflow Indicator */
-+//	XRX200_MAC_BUFST_XBUF_UFL,     /* Transmit Buffer Underflow Indicator */
-+//	XRX200_MAC_BUFST_XBUF_OFL,     /* Transmit Buffer Overflow Indicator */
-+//	XRX200_MAC_TESTEN,             /* MAC Test Enable Register */
-+//	XRX200_MAC_TESTEN_JTEN,        /* Jitter Test Enable */
-+//	XRX200_MAC_TESTEN_TXER,        /* Transmit Error Insertion */
-+//	XRX200_MAC_TESTEN_LOOP,        /* MAC Loopback Enable */
-+//	XRX200_FDMA_CTRL,              /* Ethernet Switch FetchDMA Control Register */
-+//	XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */
-+//	XRX200_FDMA_CTRL_LPI_MODE,     /* Low Power Idle Mode */
-+//	XRX200_FDMA_CTRL_EGSTAG,       /* Egress Special Tag Size */
-+//	XRX200_FDMA_CTRL_IGSTAG,       /* Ingress Special Tag Size */
-+//	XRX200_FDMA_CTRL_EXCOL,        /* Excessive Collision Handling */
-+//	XRX200_FDMA_STETYPE,           /* Special Tag EthertypeControl Register */
-+//	XRX200_FDMA_STETYPE_ETYPE,     /* Special Tag Ethertype */
-+//	XRX200_FDMA_VTETYPE,           /* VLAN Tag EthertypeControl Register */
-+//	XRX200_FDMA_VTETYPE_ETYPE,     /* VLAN Tag Ethertype */
-+//	XRX200_FDMA_STAT_0,            /* FDMA Status Register0 */
-+//	XRX200_FDMA_STAT_0_FSMS,       /* FSM states status */
-+//	XRX200_FDMA_IER,               /* Fetch DMA Global InterruptEnable Register */
-+//	XRX200_FDMA_IER_PCKD,          /* Packet Drop Interrupt Enable */
-+//	XRX200_FDMA_IER_PCKR,          /* Packet Ready Interrupt Enable */
-+//	XRX200_FDMA_IER_PCKT,          /* Packet Sent Interrupt Enable */
-+//	XRX200_FDMA_ISR,               /* Fetch DMA Global InterruptStatus Register */
-+//	XRX200_FDMA_ISR_PCKTD,         /* Packet Drop */
-+//	XRX200_FDMA_ISR_PCKR,          /* Packet is Ready for Transmission */
-+//	XRX200_FDMA_ISR_PCKT,          /* Packet Sent Event */
-+//	XRX200_FDMA_PCTRL,             /* Ethernet SwitchFetch DMA Port Control Register */
-+//	XRX200_FDMA_PCTRL_VLANMOD,     /* VLAN Modification Enable */
-+//	XRX200_FDMA_PCTRL_DSCPRM,      /* DSCP Re-marking Enable */
-+//	XRX200_FDMA_PCTRL_STEN,        /* Special Tag Insertion Enable */
-+//	XRX200_FDMA_PCTRL_EN,          /* FDMA Port Enable */
-+//	XRX200_FDMA_PRIO,              /* Ethernet SwitchFetch DMA Port Priority Register */
-+//	XRX200_FDMA_PRIO_PRIO,         /* FDMA PRIO */
-+//	XRX200_FDMA_PSTAT0,            /* Ethernet SwitchFetch DMA Port Status Register 0 */
-+//	XRX200_FDMA_PSTAT0_PKT_AVAIL,  /* Port Egress Packet Available */
-+//	XRX200_FDMA_PSTAT0_POK,        /* Port Status OK */
-+//	XRX200_FDMA_PSTAT0_PSEG,       /* Port Egress Segment Count */
-+//	XRX200_FDMA_PSTAT1_HDR,        /* Ethernet SwitchFetch DMA Port Status Register 1 */
-+//	XRX200_FDMA_PSTAT1_HDR_PTR,    /* Header Pointer */
-+//	XRX200_FDMA_TSTAMP0,           /* Egress TimeStamp Register 0 */
-+//	XRX200_FDMA_TSTAMP0_TSTL,      /* Time Stamp [15:0] */
-+//	XRX200_FDMA_TSTAMP1,           /* Egress TimeStamp Register 1 */
-+//	XRX200_FDMA_TSTAMP1_TSTH,      /* Time Stamp [31:16] */
-+//	XRX200_SDMA_CTRL,              /* Ethernet Switch StoreDMA Control Register */
-+//	XRX200_SDMA_CTRL_TSTEN,        /* Time Stamp Enable */
-+//	XRX200_SDMA_FCTHR1,            /* SDMA Flow Control Threshold1 Register */
-+//	XRX200_SDMA_FCTHR1_THR1,       /* Threshold 1 */
-+//	XRX200_SDMA_FCTHR2,            /* SDMA Flow Control Threshold2 Register */
-+//	XRX200_SDMA_FCTHR2_THR2,       /* Threshold 2 */
-+//	XRX200_SDMA_FCTHR3,            /* SDMA Flow Control Threshold3 Register */
-+//	XRX200_SDMA_FCTHR3_THR3,       /* Threshold 3 */
-+//	XRX200_SDMA_FCTHR4,            /* SDMA Flow Control Threshold4 Register */
-+//	XRX200_SDMA_FCTHR4_THR4,       /* Threshold 4 */
-+//	XRX200_SDMA_FCTHR5,            /* SDMA Flow Control Threshold5 Register */
-+//	XRX200_SDMA_FCTHR5_THR5,       /* Threshold 5 */
-+//	XRX200_SDMA_FCTHR6,            /* SDMA Flow Control Threshold6 Register */
-+//	XRX200_SDMA_FCTHR6_THR6,       /* Threshold 6 */
-+//	XRX200_SDMA_FCTHR7,            /* SDMA Flow Control Threshold7 Register */
-+//	XRX200_SDMA_FCTHR7_THR7,       /* Threshold 7 */
-+//	XRX200_SDMA_STAT_0,            /* SDMA Status Register0 */
-+//	XRX200_SDMA_STAT_0_BPS_FILL,   /* Back Pressure Status */
-+//	XRX200_SDMA_STAT_0_BPS_PNT,    /* Back Pressure Status */
-+//	XRX200_SDMA_STAT_0_DROP,       /* Back Pressure Status */
-+//	XRX200_SDMA_STAT_1,            /* SDMA Status Register1 */
-+//	XRX200_SDMA_STAT_1_FILL,       /* Buffer Filling Level */
-+//	XRX200_SDMA_STAT_2,            /* SDMA Status Register2 */
-+//	XRX200_SDMA_STAT_2_FSMS,       /* FSM states status */
-+//	XRX200_SDMA_IER,               /* SDMA Interrupt Enable Register */
-+//	XRX200_SDMA_IER_BPEX,          /* Buffer Pointers Exceeded */
-+//	XRX200_SDMA_IER_BFULL,         /* Buffer Full */
-+//	XRX200_SDMA_IER_FERR,          /* Frame Error */
-+//	XRX200_SDMA_IER_FRX,           /* Frame Received Successfully */
-+//	XRX200_SDMA_ISR,               /* SDMA Interrupt Status Register */
-+//	XRX200_SDMA_ISR_BPEX,          /* Packet Descriptors Exceeded */
-+//	XRX200_SDMA_ISR_BFULL,         /* Buffer Full */
-+//	XRX200_SDMA_ISR_FERR,          /* Frame Error */
-+//	XRX200_SDMA_ISR_FRX,           /* Frame Received Successfully */
-+//	XRX200_SDMA_PCTRL,             /* Ethernet SwitchStore DMA Port Control Register */
-+//	XRX200_SDMA_PCTRL_DTHR,        /* Drop Threshold Selection */
-+//	XRX200_SDMA_PCTRL_PTHR,        /* Pause Threshold Selection */
-+//	XRX200_SDMA_PCTRL_PHYEFWD,     /* Forward PHY Error Frames */
-+//	XRX200_SDMA_PCTRL_ALGFWD,      /* Forward Alignment Error Frames */
-+//	XRX200_SDMA_PCTRL_LENFWD,      /* Forward Length Errored Frames */
-+//	XRX200_SDMA_PCTRL_OSFWD,       /* Forward Oversized Frames */
-+//	XRX200_SDMA_PCTRL_USFWD,       /* Forward Undersized Frames */
-+//	XRX200_SDMA_PCTRL_FCSIGN,      /* Ignore FCS Errors */
-+//	XRX200_SDMA_PCTRL_FCSFWD,      /* Forward FCS Errored Frames */
-+//	XRX200_SDMA_PCTRL_PAUFWD,      /* Pause Frame Forwarding */
-+//	XRX200_SDMA_PCTRL_MFCEN,       /* Metering Flow Control Enable */
-+//	XRX200_SDMA_PCTRL_FCEN,        /* Flow Control Enable */
-+//	XRX200_SDMA_PCTRL_PEN,         /* Port Enable */
-+//	XRX200_SDMA_PRIO,              /* Ethernet SwitchStore DMA Port Priority Register */
-+//	XRX200_SDMA_PRIO_PRIO,         /* SDMA PRIO */
-+//	XRX200_SDMA_PSTAT0_HDR,        /* Ethernet SwitchStore DMA Port Status Register 0 */
-+//	XRX200_SDMA_PSTAT0_HDR_PTR,    /* Port Ingress Queue Header Pointer */
-+//	XRX200_SDMA_PSTAT1,            /* Ethernet SwitchStore DMA Port Status Register 1 */
-+//	XRX200_SDMA_PSTAT1_PPKT,       /* Port Ingress Packet Count */
-+//	XRX200_SDMA_TSTAMP0,           /* Ingress TimeStamp Register 0 */
-+//	XRX200_SDMA_TSTAMP0_TSTL,      /* Time Stamp [15:0] */
-+//	XRX200_SDMA_TSTAMP1,           /* Ingress TimeStamp Register 1 */
-+//	XRX200_SDMA_TSTAMP1_TSTH,      /* Time Stamp [31:16] */
-+};
-+
-+
-+struct xrx200sw_reg {
-+	int offset;
-+	int shift;
-+	int size;
-+	int mult;
-+} xrx200sw_reg[] = {
-+//	offeset	     shift    size	mult
-+//	{0x0000,	 0,	16,	0x00}, /* XRX200_ETHSW_SWRES             Ethernet Switch ResetControl Register */
-+//	{0x0000,	 1,	 1,	0x00}, /* XRX200_ETHSW_SWRES_R1          Hardware Reset */
-+//	{0x0000,	 0,	 1,	0x00}, /* XRX200_ETHSW_SWRES_R0          Register Configuration */
-+//	{0x0004,	 0,	16,	0x00}, /* XRX200_ETHSW_CLK_MAC_GAT       Ethernet Switch Clock ControlRegister  */
-+//	{0x0004,	12,	 4,	0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP     Exponent to put system into sleep */
-+//	{0x0004,	 8,	 4,	0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE      Exponent to wake up system */
-+//	{0x0004,	 7,	 1,	0x00}, /* XRX200_ETHSW_CLK_CLK2_EN       CLK2 Input for MAC */
-+//	{0x0004,	 6,	 1,	0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN    External Clock Divider Enable */
-+//	{0x0004,	 5,	 1,	0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN    Clock Gating Enable */
-+//	{0x0004,	 4,	 1,	0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN    Clock Gating Enable */
-+//	{0x0004,	 3,	 1,	0x00}, /* XRX200_ETHSW_CLK_GAT_EN        Clock Gating Enable */
-+//	{0x0004,	 2,	 1,	0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN    Clock Gating Enable */
-+//	{0x0008,	 0,	16,	0x00}, /* XRX200_ETHSW_DBG_STEP          Ethernet Switch Debug ControlRegister */
-+//	{0x0008,	12,	 4,	0x00}, /* XRX200_ETHSW_DBG_CLK_SEL       Trigger Enable */
-+//	{0x0008,	11,	 1,	0x00}, /* XRX200_ETHSW_DBG_MON_EN        Monitoring Enable */
-+//	{0x0008,	 9,	 2,	0x00}, /* XRX200_ETHSW_DBG_TRIG_EN       Trigger Enable */
-+//	{0x0008,	 8,	 1,	0x00}, /* XRX200_ETHSW_DBG_MODE          Debug Mode */
-+//	{0x0008,	 0,	 8,	0x00}, /* XRX200_ETHSW_DBG_STEP_TIME     Clock Step Size */
-+//	{0x000C,	 0,	16,	0x00}, /* XRX200_ETHSW_SSB_MODE          Ethernet Switch SharedSegment Buffer Mode Register */
-+//	{0x000C,	 2,	 4,	0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE     Memory Address */
-+//	{0x000C,	 0,	 2,	0x00}, /* XRX200_ETHSW_SSB_MODE_MODE     Memory Access Mode */
-+//	{0x0010,	 0,	16,	0x00}, /* XRX200_ETHSW_SSB_ADDR          Ethernet Switch SharedSegment Buffer Address Register */
-+//	{0x0010,	 0,	16,	0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE     Memory Address */
-+//	{0x0014,	 0,	16,	0x00}, /* XRX200_ETHSW_SSB_DATA          Ethernet Switch SharedSegment Buffer Data Register */
-+//	{0x0014,	 0,	16,	0x00}, /* XRX200_ETHSW_SSB_DATA_DATA     Data Value */
-+//	{0x0018,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_0             Ethernet Switch CapabilityRegister 0 */
-+//	{0x0018,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_0_SPEED       Clock frequency */
-+//	{0x001C,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_1             Ethernet Switch CapabilityRegister 1 */
-+//	{0x001C,	15,	 1,	0x00}, /* XRX200_ETHSW_CAP_1_GMAC        MAC operation mode */
-+//	{0x001C,	 8,	 7,	0x00}, /* XRX200_ETHSW_CAP_1_QUEUE       Number of queues */
-+//	{0x001C,	 4,	 4,	0x00}, /* XRX200_ETHSW_CAP_1_VPORTS      Number of virtual ports */
-+//	{0x001C,	 0,	 4,	0x00}, /* XRX200_ETHSW_CAP_1_PPORTS      Number of physical ports */
-+//	{0x0020,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_2             Ethernet Switch CapabilityRegister 2 */
-+//	{0x0020,	 0,	11,	0x00}, /* XRX200_ETHSW_CAP_2_PACKETS     Number of packets */
-+//	{0x0024,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_3             Ethernet Switch CapabilityRegister 3 */
-+//	{0x0024,	 8,	 8,	0x00}, /* XRX200_ETHSW_CAP_3_METERS      Number of traffic meters */
-+//	{0x0024,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS     Number of traffic shapers */
-+//	{0x0028,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_4             Ethernet Switch CapabilityRegister 4 */
-+//	{0x0028,	 8,	 8,	0x00}, /* XRX200_ETHSW_CAP_4_PPPOE       PPPoE table size */
-+//	{0x0028,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_4_VLAN        Active VLAN table size */
-+//	{0x002C,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_5             Ethernet Switch CapabilityRegister 5 */
-+//	{0x002C,	 8,	 8,	0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN      IP packet length table size */
-+//	{0x002C,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_5_PROT        Protocol table size */
-+//	{0x0030,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_6             Ethernet Switch CapabilityRegister 6 */
-+//	{0x0030,	 8,	 8,	0x00}, /* XRX200_ETHSW_CAP_6_MACDASA     MAC DA/SA table size */
-+//	{0x0030,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_6_APPL        Application table size */
-+//	{0x0034,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_7             Ethernet Switch CapabilityRegister 7 */
-+//	{0x0034,	 8,	 8,	0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM     IP DA/SA MSB table size */
-+//	{0x0034,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL     IP DA/SA LSB table size */
-+//	{0x0038,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_8             Ethernet Switch CapabilityRegister 8 */
-+//	{0x0038,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_8_MCAST       Multicast table size */
-+//	{0x003C,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_9             Ethernet Switch CapabilityRegister 9 */
-+//	{0x003C,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_9_FLAGG       Flow Aggregation table size */
-+//	{0x0040,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_10            Ethernet Switch CapabilityRegister 10 */
-+//	{0x0040,	 0,	13,	0x00}, /* XRX200_ETHSW_CAP_10_MACBT      MAC bridging table size */
-+//	{0x0044,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_11            Ethernet Switch CapabilityRegister 11 */
-+//	{0x0044,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL     Packet buffer size (lower part, in byte) */
-+//	{0x0048,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_12            Ethernet Switch CapabilityRegister 12 */
-+//	{0x0048,	 0,	 3,	0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH     Packet buffer size (higher part, in byte) */
-+//	{0x004C,	 0,	16,	0x00}, /* XRX200_ETHSW_VERSION_REV       Ethernet Switch VersionRegister */
-+//	{0x004C,	 8,	 8,	0x00}, /* XRX200_ETHSW_VERSION_MOD_ID    Module Identification */
-+//	{0x004C,	 0,	 8,	0x00}, /* XRX200_ETHSW_VERSION_REV_ID    Hardware Revision Identification */
-+//	{0x0050,	 0,	16,	0x00}, /* XRX200_ETHSW_IER               Interrupt Enable Register */
-+//	{0x0050,	 4,	 1,	0x00}, /* XRX200_ETHSW_IER_FDMAIE        Fetch DMA Interrupt Enable */
-+//	{0x0050,	 3,	 1,	0x00}, /* XRX200_ETHSW_IER_SDMAIE        Store DMA Interrupt Enable */
-+//	{0x0050,	 2,	 1,	0x00}, /* XRX200_ETHSW_IER_MACIE         Ethernet MAC Interrupt Enable */
-+//	{0x0050,	 1,	 1,	0x00}, /* XRX200_ETHSW_IER_PCEIE         Parser and Classification Engine Interrupt Enable */
-+//	{0x0050,	 0,	 1,	0x00}, /* XRX200_ETHSW_IER_BMIE          Buffer Manager Interrupt Enable */
-+//	{0x0054,	 0,	16,	0x00}, /* XRX200_ETHSW_ISR               Interrupt Status Register */
-+//	{0x0054,	 4,	 1,	0x00}, /* XRX200_ETHSW_ISR_FDMAINT       Fetch DMA Interrupt */
-+//	{0x0054,	 3,	 1,	0x00}, /* XRX200_ETHSW_ISR_SDMAINT       Store DMA Interrupt */
-+//	{0x0054,	 2,	 1,	0x00}, /* XRX200_ETHSW_ISR_MACINT        Ethernet MAC Interrupt */
-+//	{0x0054,	 1,	 1,	0x00}, /* XRX200_ETHSW_ISR_PCEINT        Parser and Classification Engine Interrupt */
-+//	{0x0054,	 0,	 1,	0x00}, /* XRX200_ETHSW_ISR_BMINT         Buffer Manager Interrupt */
-+//	{0x0058,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_0           Ethernet Switch SpareCells 0 */
-+//	{0x0058,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_0_SPARE     SPARE0  */
-+//	{0x005C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_1           Ethernet Switch SpareCells 1 */
-+//	{0x005C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_1_SPARE     SPARE1  */
-+//	{0x0060,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_2           Ethernet Switch SpareCells 2 */
-+//	{0x0060,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_2_SPARE     SPARE2  */
-+//	{0x0064,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_3           Ethernet Switch SpareCells 3 */
-+//	{0x0064,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_3_SPARE     SPARE3  */
-+//	{0x0068,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_4           Ethernet Switch SpareCells 4 */
-+//	{0x0068,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_4_SPARE     SPARE4  */
-+//	{0x006C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_5           Ethernet Switch SpareCells 5 */
-+//	{0x006C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_5_SPARE     SPARE5  */
-+//	{0x0070,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_6           Ethernet Switch SpareCells 6 */
-+//	{0x0070,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_6_SPARE     SPARE6  */
-+//	{0x0074,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_7           Ethernet Switch SpareCells 7 */
-+//	{0x0074,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_7_SPARE     SPARE7  */
-+//	{0x0078,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_8           Ethernet Switch SpareCells 8 */
-+//	{0x0078,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_8_SPARE     SPARE8  */
-+//	{0x007C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_9           Ethernet Switch SpareCells 9 */
-+//	{0x007C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_9_SPARE     SPARE9  */
-+//	{0x0080,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_10          Ethernet Switch SpareCells 10 */
-+//	{0x0080,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_10_SPARE    SPARE10  */
-+//	{0x0084,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_11          Ethernet Switch SpareCells 11 */
-+//	{0x0084,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_11_SPARE    SPARE11  */
-+//	{0x0088,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_12          Ethernet Switch SpareCells 12 */
-+//	{0x0088,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_12_SPARE    SPARE12  */
-+//	{0x008C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_13          Ethernet Switch SpareCells 13 */
-+//	{0x008C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_13_SPARE    SPARE13  */
-+//	{0x0090,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_14          Ethernet Switch SpareCells 14 */
-+//	{0x0090,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_14_SPARE    SPARE14  */
-+//	{0x0094,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_15          Ethernet Switch SpareCells 15 */
-+//	{0x0094,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_15_SPARE    SPARE15  */
-+//	{0x0100,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_3            RAM Value Register 3 */
-+//	{0x0100,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_3_VAL3       Data value [15:0] */
-+//	{0x0104,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_2            RAM Value Register 2 */
-+//	{0x0104,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_2_VAL2       Data value [15:0] */
-+//	{0x0108,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_1            RAM Value Register 1 */
-+//	{0x0108,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_1_VAL1       Data value [15:0] */
-+//	{0x010C,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_0            RAM Value Register 0 */
-+//	{0x010C,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_0_VAL0       Data value [15:0] */
-+//	{0x0110,	 0,	16,	0x00}, /* XRX200_BM_RAM_ADDR             RAM Address Register */
-+//	{0x0110,	 0,	11,	0x00}, /* XRX200_BM_RAM_ADDR_ADDR        RAM Address */
-+//	{0x0114,	 0,	16,	0x00}, /* XRX200_BM_RAM_CTRL             RAM Access Control Register */
-+//	{0x0114,	15,	 1,	0x00}, /* XRX200_BM_RAM_CTRL_BAS         Access Busy/Access Start */
-+//	{0x0114,	 5,	 1,	0x00}, /* XRX200_BM_RAM_CTRL_OPMOD       Lookup Table Access Operation Mode */
-+//	{0x0114,	 0,	 5,	0x00}, /* XRX200_BM_RAM_CTRL_ADDR        Address for RAM selection */
-+//	{0x0118,	 0,	16,	0x00}, /* XRX200_BM_FSQM_GCTRL           Free Segment Queue ManagerGlobal Control Register */
-+//	{0x0118,	 0,	10,	0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM    Maximum Segment Number */
-+//	{0x011C,	 0,	16,	0x00}, /* XRX200_BM_CONS_SEG             Number of Consumed SegmentsRegister */
-+//	{0x011C,	 0,	10,	0x00}, /* XRX200_BM_CONS_SEG_FSEG        Number of Consumed Segments */
-+//	{0x0120,	 0,	16,	0x00}, /* XRX200_BM_CONS_PKT             Number of Consumed PacketPointers Register */
-+//	{0x0120,	 0,	11,	0x00}, /* XRX200_BM_CONS_PKT_FQP         Number of Consumed Packet Pointers */
-+//	{0x0124,	 0,	16,	0x00}, /* XRX200_BM_GCTRL_F              Buffer Manager Global ControlRegister 0 */
-+//	{0x0124,	13,	 1,	0x00}, /* XRX200_BM_GCTRL_BM_STA         Buffer Manager Initialization Status Bit */
-+//	{0x0124,	12,	 1,	0x00}, /* XRX200_BM_GCTRL_SAT            RMON Counter Update Mode */
-+//	{0x0124,	11,	 1,	0x00}, /* XRX200_BM_GCTRL_FR_RBC         Freeze RMON RX Bad Byte 64 Bit Counter */
-+//	{0x0124,	10,	 1,	0x00}, /* XRX200_BM_GCTRL_FR_RGC         Freeze RMON RX Good Byte 64 Bit Counter */
-+//	{0x0124,	 9,	 1,	0x00}, /* XRX200_BM_GCTRL_FR_TGC         Freeze RMON TX Good Byte 64 Bit Counter */
-+//	{0x0124,	 8,	 1,	0x00}, /* XRX200_BM_GCTRL_I_FIN          RAM initialization finished */
-+//	{0x0124,	 7,	 1,	0x00}, /* XRX200_BM_GCTRL_CX_INI         PQM Context RAM initialization */
-+//	{0x0124,	 6,	 1,	0x00}, /* XRX200_BM_GCTRL_FP_INI         FPQM RAM initialization */
-+//	{0x0124,	 5,	 1,	0x00}, /* XRX200_BM_GCTRL_FS_INI         FSQM RAM initialization */
-+//	{0x0124,	 4,	 1,	0x00}, /* XRX200_BM_GCTRL_R_SRES         Software Reset for RMON */
-+//	{0x0124,	 3,	 1,	0x00}, /* XRX200_BM_GCTRL_S_SRES         Software Reset for Scheduler */
-+//	{0x0124,	 2,	 1,	0x00}, /* XRX200_BM_GCTRL_A_SRES         Software Reset for AVG */
-+//	{0x0124,	 1,	 1,	0x00}, /* XRX200_BM_GCTRL_P_SRES         Software Reset for PQM */
-+//	{0x0124,	 0,	 1,	0x00}, /* XRX200_BM_GCTRL_F_SRES         Software Reset for FSQM */
-+//	{0x0128,	 0,	16,	0x00}, /* XRX200_BM_QUEUE_GCTRL          Queue Manager GlobalControl Register 0 */
-+//	{0x0128,	10,	 1,	0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD   WRED Mode Signal */
-+//	{0x0128,	 7,	 3,	0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI     Average Queue Update Interval */
-+//	{0x0128,	 3,	 4,	0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF     Average Queue Weight Factor */
-+//	{0x0128,	 2,	 1,	0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN   Queue Average Calculation Enable */
-+//	{0x0128,	 0,	 2,	0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB    Drop Probability Profile */
-+//	{0x012C,	 0,	16,	0x00}, /* XRX200_BM_WRED_RTH_0           WRED Red Threshold Register0 */
-+//	{0x012C,	 0,	10,	0x00}, /* XRX200_BM_WRED_RTH_0_MINTH     Minimum Threshold */
-+//	{0x0130,	 0,	16,	0x00}, /* XRX200_BM_WRED_RTH_1           WRED Red Threshold Register1 */
-+//	{0x0130,	 0,	10,	0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH     Maximum Threshold */
-+//	{0x0134,	 0,	16,	0x00}, /* XRX200_BM_WRED_YTH_0           WRED Yellow ThresholdRegister 0 */
-+//	{0x0134,	 0,	10,	0x00}, /* XRX200_BM_WRED_YTH_0_MINTH     Minimum Threshold */
-+//	{0x0138,	 0,	16,	0x00}, /* XRX200_BM_WRED_YTH_1           WRED Yellow ThresholdRegister 1 */
-+//	{0x0138,	 0,	10,	0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH     Maximum Threshold */
-+//	{0x013C,	 0,	16,	0x00}, /* XRX200_BM_WRED_GTH_0           WRED Green ThresholdRegister 0 */
-+//	{0x013C,	 0,	10,	0x00}, /* XRX200_BM_WRED_GTH_0_MINTH     Minimum Threshold */
-+//	{0x0140,	 0,	16,	0x00}, /* XRX200_BM_WRED_GTH_1           WRED Green ThresholdRegister 1 */
-+//	{0x0140,	 0,	10,	0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH     Maximum Threshold */
-+//	{0x0144,	 0,	16,	0x00}, /* XRX200_BM_DROP_GTH_0_THR       Drop Threshold ConfigurationRegister 0 */
-+//	{0x0144,	 0,	11,	0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ    Threshold for frames marked red */
-+//	{0x0148,	 0,	16,	0x00}, /* XRX200_BM_DROP_GTH_1_THY       Drop Threshold ConfigurationRegister 1 */
-+//	{0x0148,	 0,	11,	0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ    Threshold for frames marked yellow */
-+//	{0x014C,	 0,	16,	0x00}, /* XRX200_BM_DROP_GTH_2_THG       Drop Threshold ConfigurationRegister 2 */
-+//	{0x014C,	 0,	11,	0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ    Threshold for frames marked green */
-+//	{0x0150,	 0,	16,	0x00}, /* XRX200_BM_IER                  Buffer Manager Global InterruptEnable Register */
-+//	{0x0150,	 7,	 1,	0x00}, /* XRX200_BM_IER_CNT4             Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
-+//	{0x0150,	 6,	 1,	0x00}, /* XRX200_BM_IER_CNT3             Counter Group 3 (RMON-PQM) Interrupt Enable */
-+//	{0x0150,	 5,	 1,	0x00}, /* XRX200_BM_IER_CNT2             Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
-+//	{0x0150,	 4,	 1,	0x00}, /* XRX200_BM_IER_CNT1             Counter Group 1 (RMON-QFETCH) Interrupt Enable */
-+//	{0x0150,	 3,	 1,	0x00}, /* XRX200_BM_IER_CNT0             Counter Group 0 (RMON-QSTOR) Interrupt Enable */
-+//	{0x0150,	 2,	 1,	0x00}, /* XRX200_BM_IER_DEQ              PQM dequeue Interrupt Enable */
-+//	{0x0150,	 1,	 1,	0x00}, /* XRX200_BM_IER_ENQ              PQM Enqueue Interrupt Enable */
-+//	{0x0150,	 0,	 1,	0x00}, /* XRX200_BM_IER_FSQM             Buffer Empty Interrupt Enable */
-+//	{0x0154,	 0,	16,	0x00}, /* XRX200_BM_ISR                  Buffer Manager Global InterruptStatus Register */
-+//	{0x0154,	 7,	 1,	0x00}, /* XRX200_BM_ISR_CNT4             Counter Group 4 Interrupt */
-+//	{0x0154,	 6,	 1,	0x00}, /* XRX200_BM_ISR_CNT3             Counter Group 3 Interrupt */
-+//	{0x0154,	 5,	 1,	0x00}, /* XRX200_BM_ISR_CNT2             Counter Group 2 Interrupt */
-+//	{0x0154,	 4,	 1,	0x00}, /* XRX200_BM_ISR_CNT1             Counter Group 1 Interrupt */
-+//	{0x0154,	 3,	 1,	0x00}, /* XRX200_BM_ISR_CNT0             Counter Group 0 Interrupt */
-+//	{0x0154,	 2,	 1,	0x00}, /* XRX200_BM_ISR_DEQ              PQM dequeue Interrupt Enable */
-+//	{0x0154,	 1,	 1,	0x00}, /* XRX200_BM_ISR_ENQ              PQM Enqueue Interrupt */
-+//	{0x0154,	 0,	 1,	0x00}, /* XRX200_BM_ISR_FSQM             Buffer Empty Interrupt */
-+//	{0x0158,	 0,	16,	0x00}, /* XRX200_BM_CISEL                Buffer Manager RMON CounterInterrupt Select Register */
-+//	{0x0158,	 0,	 3,	0x00}, /* XRX200_BM_CISEL_PORT           Port Number */
-+//	{0x015C,	 0,	16,	0x00}, /* XRX200_BM_DEBUG_CTRL_DBG       Debug Control Register */
-+//	{0x015C,	 0,	 8,	0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL   Select Signal for Debug Multiplexer */
-+//	{0x0160,	 0,	16,	0x00}, /* XRX200_BM_DEBUG_VAL_DBG        Debug Value Register */
-+//	{0x0160,	 0,	16,	0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT    Debug Data Value */
-+//	{0x0200,	 0,	16,	0x08}, /* XRX200_BM_PCFG                 Buffer Manager PortConfiguration Register */
-+//	{0x0200,	 0,	 1,	0x08}, /* XRX200_BM_PCFG_CNTEN           RMON Counter Enable */
-+//	{0x0204,	 0,	16,	0x08}, /* XRX200_BM_RMON_CTRL_RAM1       Buffer ManagerRMON Control Register */
-+//	{0x0204,	 1,	 1,	0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES   Software Reset for RMON RAM2 */
-+//	{0x0204,	 0,	 1,	0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES   Software Reset for RMON RAM1 */
-+//	{0x0400,	 0,	16,	0x08}, /* XRX200_PQM_DP                  Packet Queue ManagerDrop Probability Register */
-+//	{0x0400,	 0,	 2,	0x08}, /* XRX200_PQM_DP_DPROB            Drop Probability Profile */
-+//	{0x0404,	 0,	16,	0x08}, /* XRX200_PQM_RS                  Packet Queue ManagerRate Shaper Assignment Register */
-+//	{0x0404,	15,	 1,	0x08}, /* XRX200_PQM_RS_EN2              Rate Shaper 2 Enable */
-+//	{0x0404,	 8,	 6,	0x08}, /* XRX200_PQM_RS_RS2              Rate Shaper 2 */
-+//	{0x0404,	 7,	 1,	0x08}, /* XRX200_PQM_RS_EN1              Rate Shaper 1 Enable */
-+//	{0x0404,	 0,	 6,	0x08}, /* XRX200_PQM_RS_RS1              Rate Shaper 1 */
-+//	{0x0500,	 0,	16,	0x14}, /* XRX200_RS_CTRL                 Rate Shaper ControlRegister */
-+//	{0x0500,	 0,	 1,	0x14}, /* XRX200_RS_CTRL_RSEN            Rate Shaper Enable */
-+//	{0x0504,	 0,	16,	0x14}, /* XRX200_RS_CBS                  Rate Shaper CommittedBurst Size Register */
-+//	{0x0504,	 0,	10,	0x14}, /* XRX200_RS_CBS_CBS              Committed Burst Size */
-+//	{0x0508,	 0,	16,	0x14}, /* XRX200_RS_IBS                  Rate Shaper InstantaneousBurst Size Register */
-+//	{0x0508,	 0,	 2,	0x14}, /* XRX200_RS_IBS_IBS              Instantaneous Burst Size */
-+//	{0x050C,	 0,	16,	0x14}, /* XRX200_RS_CIR_EXP              Rate Shaper RateExponent Register */
-+//	{0x050C,	 0,	 4,	0x14}, /* XRX200_RS_CIR_EXP_EXP          Exponent */
-+//	{0x0510,	 0,	16,	0x14}, /* XRX200_RS_CIR_MANT             Rate Shaper RateMantissa Register */
-+//	{0x0510,	 0,	10,	0x14}, /* XRX200_RS_CIR_MANT_MANT        Mantissa */
-+	{0x1100,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_7           Table Key Data 7 */
-+//	{0x1100,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7      Key Value[15:0] */
-+	{0x1104,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_6           Table Key Data 6 */
-+//	{0x1104,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6      Key Value[15:0] */
-+	{0x1108,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_5           Table Key Data 5 */
-+//	{0x1108,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5      Key Value[15:0] */
-+	{0x110C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_4           Table Key Data 4 */
-+//	{0x110C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4      Key Value[15:0] */
-+	{0x1110,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_3           Table Key Data 3 */
-+//	{0x1110,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3      Key Value[15:0] */
-+	{0x1114,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_2           Table Key Data 2 */
-+//	{0x1114,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2      Key Value[15:0] */
-+	{0x1118,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_1           Table Key Data 1 */
-+//	{0x1118,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1      Key Value[31:16] */
-+	{0x111C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_0           Table Key Data 0 */
-+//	{0x111C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0      Key Value[15:0] */
-+	{0x1120,	 0,	16,	0x00}, /* XRX200_PCE_TBL_MASK_0          Table Mask Write Register0 */
-+//	{0x1120,	 0,	16,	0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0    Mask Pattern [15:0] */
-+	{0x1124,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_4           Table Value Register4 */
-+//	{0x1124,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4      Data value [15:0] */
-+	{0x1128,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_3           Table Value Register3 */
-+//	{0x1128,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3      Data value [15:0] */
-+	{0x112C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_2           Table Value Register2 */
-+//	{0x112C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2      Data value [15:0] */
-+	{0x1130,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_1           Table Value Register1 */
-+//	{0x1130,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1      Data value [15:0] */
-+	{0x1134,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_0           Table Value Register0 */
-+//	{0x1134,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0      Data value [15:0] */
-+//	{0x1138,	 0,	16,	0x00}, /* XRX200_PCE_TBL_ADDR            Table Entry AddressRegister */
-+	{0x1138,	 0,	11,	0x00}, /* XRX200_PCE_TBL_ADDR_ADDR       Table Address */
-+//	{0x113C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_CTRL            Table Access ControlRegister */
-+	{0x113C,	15,	 1,	0x00}, /* XRX200_PCE_TBL_CTRL_BAS        Access Busy/Access Start */
-+	{0x113C,	13,	 1,	0x00}, /* XRX200_PCE_TBL_CTRL_TYPE       Lookup Entry Type */
-+	{0x113C,	12,	 1,	0x00}, /* XRX200_PCE_TBL_CTRL_VLD        Lookup Entry Valid */
-+	{0x113C,	 7,	 4,	0x00}, /* XRX200_PCE_TBL_CTRL_GMAP       Group Map */
-+	{0x113C,	 5,	 2,	0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD      Lookup Table Access Operation Mode */
-+	{0x113C,	 0,	 5,	0x00}, /* XRX200_PCE_TBL_CTRL_ADDR       Lookup Table Address */
-+//	{0x1140,	 0,	16,	0x00}, /* XRX200_PCE_TBL_STAT            Table General StatusRegister */
-+//	{0x1140,	 2,	 1,	0x00}, /* XRX200_PCE_TBL_STAT_TBUSY      Table Access Busy */
-+//	{0x1140,	 1,	 1,	0x00}, /* XRX200_PCE_TBL_STAT_TEMPT      Table Empty */
-+//	{0x1140,	 0,	 1,	0x00}, /* XRX200_PCE_TBL_STAT_TFUL       Table Full */
-+//	{0x1144,	 0,	16,	0x00}, /* XRX200_PCE_AGE_0               Aging Counter ConfigurationRegister 0 */
-+//	{0x1144,	 0,	 4,	0x00}, /* XRX200_PCE_AGE_0_EXP           Aging Counter Exponent Value  */
-+//	{0x1148,	 0,	16,	0x00}, /* XRX200_PCE_AGE_1               Aging Counter ConfigurationRegister 1 */
-+//	{0x1148,	 0,	16,	0x00}, /* XRX200_PCE_AGE_1_MANT          Aging Counter Mantissa Value  */
-+//	{0x114C,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_1              Port Map Register 1 */
-+//	{0x114C,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_1_MPMAP        Monitoring Port Map */
-+//	{0x1150,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_2              Port Map Register 2 */
-+//	{0x1150,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP      Default Multicast Port Map */
-+//	{0x1154,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_3              Port Map Register 3 */
-+//	{0x1154,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_3_UUCMAP       Default Unknown Unicast Port Map */
-+//	{0x1158,	 0,	16,	0x00}, /* XRX200_PCE_GCTRL_0             PCE Global Control Register0 */
-+//	{0x1158,	15,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_IGMP        IGMP Mode Selection */
-+	{0x1158,	14,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_VLAN        VLAN-aware Switching */
-+//	{0x1158,	13,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_NOPM        No Port Map Forwarding */
-+//	{0x1158,	12,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_SCONUC      Unknown Unicast Storm Control */
-+//	{0x1158,	11,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_SCONMC      Multicast Storm Control */
-+//	{0x1158,	10,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_SCONBC      Broadcast Storm Control */
-+//	{0x1158,	 8,	 2,	0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD     Storm Control Mode */
-+//	{0x1158,	 4,	 4,	0x00}, /* XRX200_PCE_GCTRL_0_SCONMET     Storm Control Metering Instance */
-+//	{0x1158,	 3,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID    Access Request */
-+//	{0x1158,	 2,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD     Port Lock Mode */
-+//	{0x1158,	 1,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD     MAC Address Learning Limitation Mode */
-+//	{0x1158,	 0,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_MTFL        MAC Table Flushing */
-+//	{0x115C,	 0,	16,	0x00}, /* XRX200_PCE_GCTRL_1             PCE Global Control Register1 */
-+//	{0x115C,	 1,	 1,	0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS     PCE Disable after currently processed packet */
-+//	{0x115C,	 0,	 1,	0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD      MAC Address Learning Mode */
-+//	{0x1160,	 0,	16,	0x00}, /* XRX200_PCE_TCM_GLOB_CTRL       Three-color MarkerGlobal Control Register */
-+//	{0x1160,	 6,	 3,	0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */
-+//	{0x1160,	 3,	 3,	0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */
-+//	{0x1160,	 0,	 3,	0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */
-+//	{0x1164,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_CTRL           IGMP Control Register */
-+//	{0x1164,	15,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN    Force Aging of Table Entries Enable */
-+//	{0x1164,	14,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE    Fast Leave Enable */
-+//	{0x1164,	13,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN    Default Maximum Response Time Enable */
-+//	{0x1164,	12,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP     Join Aggregation Suppression Enable */
-+//	{0x1164,	11,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP    Report Suppression Enable */
-+//	{0x1164,	10,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN     Snooping of Router Port Enable */
-+//	{0x1164,	 8,	 2,	0x00}, /* XRX200_PCE_IGMP_CTRL_ROB       Robustness Variable */
-+//	{0x1164,	 0,	 8,	0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT      IGMP Default Maximum Response Time */
-+//	{0x1168,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_DRPM           IGMP Default RouterPort Map Register */
-+//	{0x1168,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM      IGMP Default Router Port Map */
-+//	{0x116C,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_AGE_0          IGMP Aging Register0 */
-+//	{0x116C,	 3,	 8,	0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT     IGMP Group Aging Time Mantissa */
-+//	{0x116C,	 0,	 3,	0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP      IGMP Group Aging Time Exponent */
-+//	{0x1170,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_AGE_1          IGMP Aging Register1 */
-+//	{0x1170,	 0,	12,	0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT     IGMP Router Port Aging Time Mantissa */
-+//	{0x1174,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_STAT           IGMP Status Register */
-+//	{0x1174,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_STAT_IGPM      IGMP Port Map */
-+//	{0x1178,	 0,	16,	0x00}, /* XRX200_WOL_GLB_CTRL            Wake-on-LAN ControlRegister */
-+//	{0x1178,	 0,	 1,	0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN     WoL Password Enable */
-+//	{0x117C,	 0,	16,	0x00}, /* XRX200_WOL_DA_0                Wake-on-LAN DestinationAddress Register 0 */
-+//	{0x117C,	 0,	16,	0x00}, /* XRX200_WOL_DA_0_DA0            WoL Destination Address [15:0] */
-+//	{0x1180,	 0,	16,	0x00}, /* XRX200_WOL_DA_1                Wake-on-LAN DestinationAddress Register 1 */
-+//	{0x1180,	 0,	16,	0x00}, /* XRX200_WOL_DA_1_DA1            WoL Destination Address [31:16] */
-+//	{0x1184,	 0,	16,	0x00}, /* XRX200_WOL_DA_2                Wake-on-LAN DestinationAddress Register 2 */
-+//	{0x1184,	 0,	16,	0x00}, /* XRX200_WOL_DA_2_DA2            WoL Destination Address [47:32] */
-+//	{0x1188,	 0,	16,	0x00}, /* XRX200_WOL_PW_0                Wake-on-LAN Password Register0 */
-+//	{0x1188,	 0,	16,	0x00}, /* XRX200_WOL_PW_0_PW0            WoL Password [15:0] */
-+//	{0x118C,	 0,	16,	0x00}, /* XRX200_WOL_PW_1                Wake-on-LAN Password Register1 */
-+//	{0x118C,	 0,	16,	0x00}, /* XRX200_WOL_PW_1_PW1            WoL Password [31:16] */
-+//	{0x1190,	 0,	16,	0x00}, /* XRX200_WOL_PW_2                Wake-on-LAN Password Register2 */
-+//	{0x1190,	 0,	16,	0x00}, /* XRX200_WOL_PW_2_PW2            WoL Password [47:32] */
-+//	{0x1194,	 0,	16,	0x00}, /* XRX200_PCE_IER_0_PINT          Parser and ClassificationEngine Global Interrupt Enable Register 0 */
-+//	{0x1194,	15,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_15       Port Interrupt Enable */
-+//	{0x1194,	14,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_14       Port Interrupt Enable */
-+//	{0x1194,	13,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_13       Port Interrupt Enable */
-+//	{0x1194,	12,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_12       Port Interrupt Enable */
-+//	{0x1194,	11,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_11       Port Interrupt Enable */
-+//	{0x1194,	10,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_10       Port Interrupt Enable */
-+//	{0x1194,	 9,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_9        Port Interrupt Enable */
-+//	{0x1194,	 8,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_8        Port Interrupt Enable */
-+//	{0x1194,	 7,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_7        Port Interrupt Enable */
-+//	{0x1194,	 6,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_6        Port Interrupt Enable */
-+//	{0x1194,	 5,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_5        Port Interrupt Enable */
-+//	{0x1194,	 4,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_4        Port Interrupt Enable */
-+//	{0x1194,	 3,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_3        Port Interrupt Enable */
-+//	{0x1194,	 2,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_2        Port Interrupt Enable */
-+//	{0x1194,	 1,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_1        Port Interrupt Enable */
-+//	{0x1194,	 0,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_0        Port Interrupt Enable */
-+//	{0x1198,	 0,	16,	0x00}, /* XRX200_PCE_IER_1               Parser and ClassificationEngine Global Interrupt Enable Register 1 */
-+//	{0x1198,	 6,	 1,	0x00}, /* XRX200_PCE_IER_1_FLOWINT       Traffic Flow Table Interrupt Rule matched Interrupt Enable */
-+//	{0x1198,	 5,	 1,	0x00}, /* XRX200_PCE_IER_1_CPH2          Classification Phase 2 Ready Interrupt Enable */
-+//	{0x1198,	 4,	 1,	0x00}, /* XRX200_PCE_IER_1_CPH1          Classification Phase 1 Ready Interrupt Enable */
-+//	{0x1198,	 3,	 1,	0x00}, /* XRX200_PCE_IER_1_CPH0          Classification Phase 0 Ready Interrupt Enable */
-+//	{0x1198,	 2,	 1,	0x00}, /* XRX200_PCE_IER_1_PRDY          Parser Ready Interrupt Enable */
-+//	{0x1198,	 1,	 1,	0x00}, /* XRX200_PCE_IER_1_IGTF          IGMP Table Full Interrupt Enable */
-+//	{0x1198,	 0,	 1,	0x00}, /* XRX200_PCE_IER_1_MTF           MAC Table Full Interrupt Enable */
-+//	{0x119C,	 0,	16,	0x00}, /* XRX200_PCE_ISR_0_PINT          Parser and ClassificationEngine Global Interrupt Status Register 0 */
-+//	{0x119C,	15,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_15       Port Interrupt */
-+//	{0x119C,	14,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_14       Port Interrupt */
-+//	{0x119C,	13,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_13       Port Interrupt */
-+//	{0x119C,	12,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_12       Port Interrupt */
-+//	{0x119C,	11,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_11       Port Interrupt */
-+//	{0x119C,	10,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_10       Port Interrupt */
-+//	{0x119C,	 9,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_9        Port Interrupt */
-+//	{0x119C,	 8,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_8        Port Interrupt */
-+//	{0x119C,	 7,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_7        Port Interrupt */
-+//	{0x119C,	 6,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_6        Port Interrupt */
-+//	{0x119C,	 5,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_5        Port Interrupt */
-+//	{0x119C,	 4,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_4        Port Interrupt */
-+//	{0x119C,	 3,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_3        Port Interrupt */
-+//	{0x119C,	 2,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_2        Port Interrupt */
-+//	{0x119C,	 1,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_1        Port Interrupt */
-+//	{0x119C,	 0,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_0        Port Interrupt */
-+//	{0x11A0,	 0,	16,	0x00}, /* XRX200_PCE_ISR_1               Parser and ClassificationEngine Global Interrupt Status Register 1 */
-+//	{0x11A0,	 6,	 1,	0x00}, /* XRX200_PCE_ISR_1_FLOWINT       Traffic Flow Table Interrupt Rule matched */
-+//	{0x11A0,	 5,	 1,	0x00}, /* XRX200_PCE_ISR_1_CPH2          Classification Phase 2 Ready Interrupt */
-+//	{0x11A0,	 4,	 1,	0x00}, /* XRX200_PCE_ISR_1_CPH1          Classification Phase 1 Ready Interrupt */
-+//	{0x11A0,	 3,	 1,	0x00}, /* XRX200_PCE_ISR_1_CPH0          Classification Phase 0 Ready Interrupt */
-+//	{0x11A0,	 2,	 1,	0x00}, /* XRX200_PCE_ISR_1_PRDY          Parser Ready Interrupt */
-+//	{0x11A0,	 1,	 1,	0x00}, /* XRX200_PCE_ISR_1_IGTF          IGMP Table Full Interrupt */
-+//	{0x11A0,	 0,	 1,	0x00}, /* XRX200_PCE_ISR_1_MTF           MAC Table Full Interrupt */
-+//	{0x11A4,	 0,	16,	0x00}, /* XRX200_PARSER_STAT_FIFO        Parser Status Register */
-+//	{0x11A4,	 8,	 8,	0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */
-+//	{0x11A4,	 5,	 3,	0x00}, /* XRX200_PARSER_STAT_FSM_STATE   Parser FSM State */
-+//	{0x11A4,	 4,	 1,	0x00}, /* XRX200_PARSER_STAT_PKT_ERR     Packet error detected */
-+//	{0x11A4,	 3,	 1,	0x00}, /* XRX200_PARSER_STAT_FSM_FIN     Parser FSM finished */
-+//	{0x11A4,	 2,	 1,	0x00}, /* XRX200_PARSER_STAT_FSM_START   Parser FSM start */
-+//	{0x11A4,	 1,	 1,	0x00}, /* XRX200_PARSER_STAT_FIFO_RDY    Parser FIFO ready for read. */
-+//	{0x11A4,	 0,	 1,	0x00}, /* XRX200_PARSER_STAT_FIFO_FULL   Parser */
-+//	{0x1200,	 0,	16,	0x28}, /* XRX200_PCE_PCTRL_0             PCE Port ControlRegister 0 */
-+//	{0x1200,	13,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_MCST        Multicast Forwarding Mode Selection */
-+//	{0x1200,	12,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN      Table-based Egress Special Tag Enable */
-+//	{0x1200,	11,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN      Ingress Special Tag Enable */
-+//	{0x1200,	10,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_PCPEN       PCP Remarking Mode */
-+//	{0x1200,	 9,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_CLPEN       Class Remarking Mode */
-+//	{0x1200,	 8,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_DPEN        Drop Precedence Remarking Mode */
-+//	{0x1200,	 7,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_CMOD        Three-color Marker Color Mode */
-+//	{0x1200,	 6,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_VREP        VLAN Replacement Mode */
-+	{0x1200,	 5,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_TVM         Transparent VLAN Mode */
-+//	{0x1200,	 4,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_PLOCK       Port Locking Enable */
-+//	{0x1200,	 3,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS      Aging Disable */
-+//	{0x1200,	 0,	 3,	0x28}, /* XRX200_PCE_PCTRL_0_PSTATE      Port State */
-+//	{0x1204,	 0,	16,	0x28}, /* XRX200_PCE_PCTRL_1             PCE Port ControlRegister 1 */
-+//	{0x1204,	 0,	 8,	0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM      MAC Address Learning Limit */
-+//	{0x1208,	 0,	16,	0x28}, /* XRX200_PCE_PCTRL_2             PCE Port ControlRegister 2 */
-+//	{0x1208,	 7,	 1,	0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD     DSCP Mode Selection */
-+//	{0x1208,	 5,	 2,	0x28}, /* XRX200_PCE_PCTRL_2_DSCP        Enable DSCP to select the Class of Service */
-+//	{0x1208,	 4,	 1,	0x28}, /* XRX200_PCE_PCTRL_2_PCP         Enable VLAN PCP to select the Class of Service */
-+//	{0x1208,	 0,	 4,	0x28}, /* XRX200_PCE_PCTRL_2_PCLASS      Port-based Traffic Class */
-+//	{0x120C,	 0,	16,	0x28}, /* XRX200_PCE_PCTRL_3_VIO         PCE Port ControlRegister 3 */
-+//	{0x120C,	11,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_EDIR        Egress Redirection Mode */
-+//	{0x120C,	10,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR      Receive Mirroring Enable for dropped frames */
-+//	{0x120C,	 9,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR      Receive Mirroring Enable for valid frames */
-+//	{0x120C,	 8,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_TXMIR       Transmit Mirroring Enable */
-+//	{0x120C,	 7,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_7       Violation Type 7 Mirroring Enable */
-+//	{0x120C,	 6,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_6       Violation Type 6 Mirroring Enable */
-+//	{0x120C,	 5,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_5       Violation Type 5 Mirroring Enable */
-+//	{0x120C,	 4,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_4       Violation Type 4 Mirroring Enable */
-+//	{0x120C,	 3,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_3       Violation Type 3 Mirroring Enable */
-+//	{0x120C,	 2,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_2       Violation Type 2 Mirroring Enable */
-+//	{0x120C,	 1,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_1       Violation Type 1 Mirroring Enable */
-+//	{0x120C,	 0,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_0       Violation Type 0 Mirroring Enable */
-+//	{0x1210,	 0,	16,	0x28}, /* XRX200_WOL_CTRL                Wake-on-LAN ControlRegister */
-+//	{0x1210,	 0,	 1,	0x28}, /* XRX200_WOL_CTRL_PORT           WoL Enable */
-+//	{0x1214,	 0,	16,	0x28}, /* XRX200_PCE_VCTRL               PCE VLAN ControlRegister */
-+	{0x1214,	 5,	 1,	0x28}, /* XRX200_PCE_VCTRL_VSR           VLAN Security Rule */
-+	{0x1214,	 4,	 1,	0x28}, /* XRX200_PCE_VCTRL_VEMR          VLAN Egress Member Violation Rule */
-+	{0x1214,	 3,	 1,	0x28}, /* XRX200_PCE_VCTRL_VIMR          VLAN Ingress Member Violation Rule */
-+	{0x1214,	 1,	 2,	0x28}, /* XRX200_PCE_VCTRL_VINR          VLAN Ingress Tag Rule */
-+	{0x1214,	 0,	 1,	0x28}, /* XRX200_PCE_VCTRL_UVR           Unknown VLAN Rule */
-+//	{0x1218,	 0,	16,	0x28}, /* XRX200_PCE_DEFPVID             PCE Default PortVID Register */
-+	{0x1218,	 0,	 6,	0x28}, /* XRX200_PCE_DEFPVID_PVID        Default Port VID Index */
-+//	{0x121C,	 0,	16,	0x28}, /* XRX200_PCE_PSTAT               PCE Port StatusRegister */
-+//	{0x121C,	 0,	16,	0x28}, /* XRX200_PCE_PSTAT_LRNCNT        Learning Count */
-+//	{0x1220,	 0,	16,	0x28}, /* XRX200_PCE_PIER                Parser and ClassificationEngine Port Interrupt Enable Register */
-+//	{0x1220,	 5,	 1,	0x28}, /* XRX200_PCE_PIER_CLDRP          Classification Drop Interrupt Enable */
-+//	{0x1220,	 4,	 1,	0x28}, /* XRX200_PCE_PIER_PTDRP          Port Drop Interrupt Enable */
-+//	{0x1220,	 3,	 1,	0x28}, /* XRX200_PCE_PIER_VLAN           VLAN Violation Interrupt Enable */
-+//	{0x1220,	 2,	 1,	0x28}, /* XRX200_PCE_PIER_WOL            Wake-on-LAN Interrupt Enable */
-+//	{0x1220,	 1,	 1,	0x28}, /* XRX200_PCE_PIER_LOCK           Port Limit Alert Interrupt Enable */
-+//	{0x1220,	 0,	 1,	0x28}, /* XRX200_PCE_PIER_LIM            Port Lock Alert Interrupt Enable */
-+//	{0x1224,	 0,	16,	0x28}, /* XRX200_PCE_PISR                Parser and ClassificationEngine Port Interrupt Status Register */
-+//	{0x1224,	 5,	 1,	0x28}, /* XRX200_PCE_PISR_CLDRP          Classification Drop Interrupt */
-+//	{0x1224,	 4,	 1,	0x28}, /* XRX200_PCE_PISR_PTDRP          Port Drop Interrupt */
-+//	{0x1224,	 3,	 1,	0x28}, /* XRX200_PCE_PISR_VLAN           VLAN Violation Interrupt */
-+//	{0x1224,	 2,	 1,	0x28}, /* XRX200_PCE_PISR_WOL            Wake-on-LAN Interrupt */
-+//	{0x1224,	 1,	 1,	0x28}, /* XRX200_PCE_PISR_LOCK           Port Lock Alert Interrupt */
-+//	{0x1224,	 0,	 1,	0x28}, /* XRX200_PCE_PISR_LIMIT          Port Limitation Alert Interrupt */
-+//	{0x1600,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_CTRL            Three-colorMarker Control Register */
-+//	{0x1600,	 0,	 1,	0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN      Three-color Marker metering instance enable */
-+//	{0x1604,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_STAT            Three-colorMarker Status Register */
-+//	{0x1604,	 1,	 1,	0x1c}, /* XRX200_PCE_TCM_STAT_AL1        Three-color Marker Alert 1 Status */
-+//	{0x1604,	 0,	 1,	0x1c}, /* XRX200_PCE_TCM_STAT_AL0        Three-color Marker Alert 0 Status */
-+//	{0x1608,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_CBS             Three-color MarkerCommitted Burst Size Register */
-+//	{0x1608,	 0,	10,	0x1c}, /* XRX200_PCE_TCM_CBS_CBS         Committed Burst Size */
-+//	{0x160C,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_EBS             Three-color MarkerExcess Burst Size Register */
-+//	{0x160C,	 0,	10,	0x1c}, /* XRX200_PCE_TCM_EBS_EBS         Excess Burst Size */
-+//	{0x1610,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_IBS             Three-color MarkerInstantaneous Burst Size Register */
-+//	{0x1610,	 0,	 2,	0x1c}, /* XRX200_PCE_TCM_IBS_IBS         Instantaneous Burst Size */
-+//	{0x1614,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_CIR_MANT        Three-colorMarker Constant Information Rate Mantissa Register */
-+//	{0x1614,	 0,	10,	0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT   Rate Counter Mantissa */
-+//	{0x1618,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_CIR_EXP         Three-colorMarker Constant Information Rate Exponent Register */
-+//	{0x1618,	 0,	 4,	0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP     Rate Counter Exponent */
-+//	{0x2300,	 0,	16,	0x00}, /* XRX200_MAC_TEST                MAC Test Register */
-+//	{0x2300,	 0,	16,	0x00}, /* XRX200_MAC_TEST_JTP            Jitter Test Pattern */
-+//	{0x2304,	 0,	16,	0x00}, /* XRX200_MAC_PFAD_CFG            MAC Pause FrameSource Address Configuration Register */
-+//	{0x2304,	 0,	 1,	0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD      Source Address Mode */
-+//	{0x2308,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_0              Pause Frame SourceAddress Part 0  */
-+//	{0x2308,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_0_PFAD         Pause Frame Source Address Part 0 */
-+//	{0x230C,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_1              Pause Frame SourceAddress Part 1  */
-+//	{0x230C,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_1_PFAD         Pause Frame Source Address Part 1 */
-+//	{0x2310,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_2              Pause Frame SourceAddress Part 2  */
-+//	{0x2310,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_2_PFAD         Pause Frame Source Address Part 2 */
-+//	{0x2314,	 0,	16,	0x00}, /* XRX200_MAC_FLEN                MAC Frame Length Register */
-+//	{0x2314,	 0,	14,	0x00}, /* XRX200_MAC_FLEN_LEN            Maximum Frame Length */
-+//	{0x2318,	 0,	16,	0x00}, /* XRX200_MAC_VLAN_ETYPE_0        MAC VLAN EthertypeRegister 0 */
-+//	{0x2318,	 0,	16,	0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER  Ethertype */
-+//	{0x231C,	 0,	16,	0x00}, /* XRX200_MAC_VLAN_ETYPE_1        MAC VLAN EthertypeRegister 1 */
-+//	{0x231C,	 0,	16,	0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER  Ethertype */
-+//	{0x2320,	 0,	16,	0x00}, /* XRX200_MAC_IER                 MAC Interrupt EnableRegister */
-+//	{0x2320,	 0,	 8,	0x00}, /* XRX200_MAC_IER_MACIEN          MAC Interrupt Enable */
-+//	{0x2324,	 0,	16,	0x00}, /* XRX200_MAC_ISR                 MAC Interrupt StatusRegister */
-+//	{0x2324,	 0,	 8,	0x00}, /* XRX200_MAC_ISR_MACINT          MAC Interrupt */
-+//	{0x2400,	 0,	16,	0x30}, /* XRX200_MAC_PSTAT               MAC Port Status Register */
-+//	{0x2400,	11,	 1,	0x30}, /* XRX200_MAC_PSTAT_PACT          PHY Active Status */
-+	{0x2400,	10,	 1,	0x30}, /* XRX200_MAC_PSTAT_GBIT          Gigabit Speed Status */
-+	{0x2400,	 9,	 1,	0x30}, /* XRX200_MAC_PSTAT_MBIT          Megabit Speed Status */
-+	{0x2400,	 8,	 1,	0x30}, /* XRX200_MAC_PSTAT_FDUP          Full Duplex Status */
-+//	{0x2400,	 7,	 1,	0x30}, /* XRX200_MAC_PSTAT_RXPAU         Receive Pause Status */
-+//	{0x2400,	 6,	 1,	0x30}, /* XRX200_MAC_PSTAT_TXPAU         Transmit Pause Status */
-+//	{0x2400,	 5,	 1,	0x30}, /* XRX200_MAC_PSTAT_RXPAUEN       Receive Pause Enable Status */
-+//	{0x2400,	 4,	 1,	0x30}, /* XRX200_MAC_PSTAT_TXPAUEN       Transmit Pause Enable Status */
-+	{0x2400,	 3,	 1,	0x30}, /* XRX200_MAC_PSTAT_LSTAT         Link Status */
-+//	{0x2400,	 2,	 1,	0x30}, /* XRX200_MAC_PSTAT_CRS           Carrier Sense Status */
-+//	{0x2400,	 1,	 1,	0x30}, /* XRX200_MAC_PSTAT_TXLPI         Transmit Low-power Idle Status */
-+//	{0x2400,	 0,	 1,	0x30}, /* XRX200_MAC_PSTAT_RXLPI         Receive Low-power Idle Status */
-+//	{0x2404,	 0,	16,	0x30}, /* XRX200_MAC_PISR                MAC Interrupt Status Register */
-+//	{0x2404,	13,	 1,	0x30}, /* XRX200_MAC_PISR_PACT           PHY Active Status */
-+//	{0x2404,	12,	 1,	0x30}, /* XRX200_MAC_PISR_SPEED          Megabit Speed Status */
-+//	{0x2404,	11,	 1,	0x30}, /* XRX200_MAC_PISR_FDUP           Full Duplex Status */
-+//	{0x2404,	10,	 1,	0x30}, /* XRX200_MAC_PISR_RXPAUEN        Receive Pause Enable Status */
-+//	{0x2404,	 9,	 1,	0x30}, /* XRX200_MAC_PISR_TXPAUEN        Transmit Pause Enable Status */
-+//	{0x2404,	 8,	 1,	0x30}, /* XRX200_MAC_PISR_LPIOFF         Receive Low-power Idle Mode is left */
-+//	{0x2404,	 7,	 1,	0x30}, /* XRX200_MAC_PISR_LPION          Receive Low-power Idle Mode is entered */
-+//	{0x2404,	 6,	 1,	0x30}, /* XRX200_MAC_PISR_JAM            Jam Status Detected */
-+//	{0x2404,	 5,	 1,	0x30}, /* XRX200_MAC_PISR_TOOSHORT       Too Short Frame Error Detected */
-+//	{0x2404,	 4,	 1,	0x30}, /* XRX200_MAC_PISR_TOOLONG        Too Long Frame Error Detected */
-+//	{0x2404,	 3,	 1,	0x30}, /* XRX200_MAC_PISR_LENERR         Length Mismatch Error Detected */
-+//	{0x2404,	 2,	 1,	0x30}, /* XRX200_MAC_PISR_FCSERR         Frame Checksum Error Detected */
-+//	{0x2404,	 1,	 1,	0x30}, /* XRX200_MAC_PISR_TXPAUSE        Pause Frame Transmitted */
-+//	{0x2404,	 0,	 1,	0x30}, /* XRX200_MAC_PISR_RXPAUSE        Pause Frame Received */
-+//	{0x2408,	 0,	16,	0x30}, /* XRX200_MAC_PIER                MAC Interrupt Enable Register */
-+//	{0x2408,	13,	 1,	0x30}, /* XRX200_MAC_PIER_PACT           PHY Active Status */
-+//	{0x2408,	12,	 1,	0x30}, /* XRX200_MAC_PIER_SPEED          Megabit Speed Status */
-+//	{0x2408,	11,	 1,	0x30}, /* XRX200_MAC_PIER_FDUP           Full Duplex Status */
-+//	{0x2408,	10,	 1,	0x30}, /* XRX200_MAC_PIER_RXPAUEN        Receive Pause Enable Status */
-+//	{0x2408,	 9,	 1,	0x30}, /* XRX200_MAC_PIER_TXPAUEN        Transmit Pause Enable Status */
-+//	{0x2408,	 8,	 1,	0x30}, /* XRX200_MAC_PIER_LPIOFF         Low-power Idle Off Interrupt Mask */
-+//	{0x2408,	 7,	 1,	0x30}, /* XRX200_MAC_PIER_LPION          Low-power Idle On Interrupt Mask */
-+//	{0x2408,	 6,	 1,	0x30}, /* XRX200_MAC_PIER_JAM            Jam Status Interrupt Mask */
-+//	{0x2408,	 5,	 1,	0x30}, /* XRX200_MAC_PIER_TOOSHORT       Too Short Frame Error Interrupt Mask */
-+//	{0x2408,	 4,	 1,	0x30}, /* XRX200_MAC_PIER_TOOLONG        Too Long Frame Error Interrupt Mask */
-+//	{0x2408,	 3,	 1,	0x30}, /* XRX200_MAC_PIER_LENERR         Length Mismatch Error Interrupt Mask */
-+//	{0x2408,	 2,	 1,	0x30}, /* XRX200_MAC_PIER_FCSERR         Frame Checksum Error Interrupt Mask */
-+//	{0x2408,	 1,	 1,	0x30}, /* XRX200_MAC_PIER_TXPAUSE        Transmit Pause Frame Interrupt Mask */
-+//	{0x2408,	 0,	 1,	0x30}, /* XRX200_MAC_PIER_RXPAUSE        Receive Pause Frame Interrupt Mask */
-+//	{0x240C,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_0              MAC Control Register0 */
-+//	{0x240C,	13,	 2,	0x30}, /* XRX200_MAC_CTRL_0_LCOL         Late Collision Control */
-+//	{0x240C,	12,	 1,	0x30}, /* XRX200_MAC_CTRL_0_BM           Burst Mode Control */
-+//	{0x240C,	11,	 1,	0x30}, /* XRX200_MAC_CTRL_0_APADEN       Automatic VLAN Padding Enable */
-+//	{0x240C,	10,	 1,	0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN      Stacked VLAN Padding Enable */
-+//	{0x240C,	 9,	 1,	0x30}, /* XRX200_MAC_CTRL_0_VPADEN       VLAN Padding Enable */
-+//	{0x240C,	 8,	 1,	0x30}, /* XRX200_MAC_CTRL_0_PADEN        Padding Enable */
-+//	{0x240C,	 7,	 1,	0x30}, /* XRX200_MAC_CTRL_0_FCS          Transmit FCS Control */
-+	{0x240C,	 4,	 3,	0x30}, /* XRX200_MAC_CTRL_0_FCON         Flow Control Mode */
-+//	{0x240C,	 2,	 2,	0x30}, /* XRX200_MAC_CTRL_0_FDUP         Full Duplex Control */
-+//	{0x240C,	 0,	 2,	0x30}, /* XRX200_MAC_CTRL_0_GMII         GMII/MII interface mode selection */
-+//	{0x2410,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_1              MAC Control Register1 */
-+//	{0x2410,	 8,	 1,	0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE     Short Preamble Control */
-+//	{0x2410,	 0,	 4,	0x30}, /* XRX200_MAC_CTRL_1_IPG          Minimum Inter Packet Gap Size */
-+//	{0x2414,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_2              MAC Control Register2 */
-+//	{0x2414,	 3,	 1,	0x30}, /* XRX200_MAC_CTRL_2_MLEN         Maximum Untagged Frame Length */
-+//	{0x2414,	 2,	 1,	0x30}, /* XRX200_MAC_CTRL_2_LCHKL        Frame Length Check Long Enable */
-+//	{0x2414,	 0,	 2,	0x30}, /* XRX200_MAC_CTRL_2_LCHKS        Frame Length Check Short Enable */
-+//	{0x2418,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_3              MAC Control Register3 */
-+//	{0x2418,	 0,	 4,	0x30}, /* XRX200_MAC_CTRL_3_RCNT         Retry Count */
-+//	{0x241C,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_4              MAC Control Register4 */
-+//	{0x241C,	 7,	 1,	0x30}, /* XRX200_MAC_CTRL_4_LPIEN        LPI Mode Enable */
-+//	{0x241C,	 0,	 7,	0x30}, /* XRX200_MAC_CTRL_4_WAIT         LPI Wait Time */
-+//	{0x2420,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_5_PJPS         MAC Control Register5 */
-+//	{0x2420,	 1,	 1,	0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP    Prolonged Jam pattern size during no-backpressure state */
-+//	{0x2420,	 0,	 1,	0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP      Prolonged Jam pattern size during backpressure state */
-+//	{0x2424,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_6_XBUF         Transmit and ReceiveBuffer Control Register */
-+//	{0x2424,	 9,	 3,	0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP  Delay */
-+//	{0x2424,	 8,	 1,	0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT    Receive Buffer Initialization */
-+//	{0x2424,	 6,	 1,	0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS  Bypass the Receive Buffer */
-+//	{0x2424,	 3,	 3,	0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP  Delay */
-+//	{0x2424,	 2,	 1,	0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT    Initialize the Transmit Buffer */
-+//	{0x2424,	 0,	 1,	0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS  Bypass the Transmit Buffer */
-+//	{0x2428,	 0,	16,	0x30}, /* XRX200_MAC_BUFST_XBUF          MAC Receive and TransmitBuffer Status Register */
-+//	{0x2428,	 3,	 1,	0x30}, /* XRX200_MAC_BUFST_RBUF_UFL      Receive Buffer Underflow Indicator */
-+//	{0x2428,	 2,	 1,	0x30}, /* XRX200_MAC_BUFST_RBUF_OFL      Receive Buffer Overflow Indicator */
-+//	{0x2428,	 1,	 1,	0x30}, /* XRX200_MAC_BUFST_XBUF_UFL      Transmit Buffer Underflow Indicator */
-+//	{0x2428,	 0,	 1,	0x30}, /* XRX200_MAC_BUFST_XBUF_OFL      Transmit Buffer Overflow Indicator */
-+//	{0x242C,	 0,	16,	0x30}, /* XRX200_MAC_TESTEN              MAC Test Enable Register */
-+//	{0x242C,	 2,	 1,	0x30}, /* XRX200_MAC_TESTEN_JTEN         Jitter Test Enable */
-+//	{0x242C,	 1,	 1,	0x30}, /* XRX200_MAC_TESTEN_TXER         Transmit Error Insertion */
-+//	{0x242C,	 0,	 1,	0x30}, /* XRX200_MAC_TESTEN_LOOP         MAC Loopback Enable */
-+//	{0x2900,	 0,	16,	0x00}, /* XRX200_FDMA_CTRL               Ethernet Switch FetchDMA Control Register */
-+//	{0x2900,	 7,	 5,	0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */
-+//	{0x2900,	 4,	 3,	0x00}, /* XRX200_FDMA_CTRL_LPI_MODE      Low Power Idle Mode */
-+//	{0x2900,	 2,	 2,	0x00}, /* XRX200_FDMA_CTRL_EGSTAG        Egress Special Tag Size */
-+//	{0x2900,	 1,	 1,	0x00}, /* XRX200_FDMA_CTRL_IGSTAG        Ingress Special Tag Size */
-+//	{0x2900,	 0,	 1,	0x00}, /* XRX200_FDMA_CTRL_EXCOL         Excessive Collision Handling */
-+//	{0x2904,	 0,	16,	0x00}, /* XRX200_FDMA_STETYPE            Special Tag EthertypeControl Register */
-+//	{0x2904,	 0,	16,	0x00}, /* XRX200_FDMA_STETYPE_ETYPE      Special Tag Ethertype */
-+//	{0x2908,	 0,	16,	0x00}, /* XRX200_FDMA_VTETYPE            VLAN Tag EthertypeControl Register */
-+//	{0x2908,	 0,	16,	0x00}, /* XRX200_FDMA_VTETYPE_ETYPE      VLAN Tag Ethertype */
-+//	{0x290C,	 0,	16,	0x00}, /* XRX200_FDMA_STAT_0             FDMA Status Register0 */
-+//	{0x290C,	 0,	16,	0x00}, /* XRX200_FDMA_STAT_0_FSMS        FSM states status */
-+//	{0x2910,	 0,	16,	0x00}, /* XRX200_FDMA_IER                Fetch DMA Global InterruptEnable Register */
-+//	{0x2910,	14,	 1,	0x00}, /* XRX200_FDMA_IER_PCKD           Packet Drop Interrupt Enable */
-+//	{0x2910,	13,	 1,	0x00}, /* XRX200_FDMA_IER_PCKR           Packet Ready Interrupt Enable */
-+//	{0x2910,	 0,	 8,	0x00}, /* XRX200_FDMA_IER_PCKT           Packet Sent Interrupt Enable */
-+//	{0x2914,	 0,	16,	0x00}, /* XRX200_FDMA_ISR                Fetch DMA Global InterruptStatus Register */
-+//	{0x2914,	14,	 1,	0x00}, /* XRX200_FDMA_ISR_PCKTD          Packet Drop */
-+//	{0x2914,	13,	 1,	0x00}, /* XRX200_FDMA_ISR_PCKR           Packet is Ready for Transmission */
-+//	{0x2914,	 0,	 8,	0x00}, /* XRX200_FDMA_ISR_PCKT           Packet Sent Event */
-+//	{0x2A00,	 0,	16,	0x18}, /* XRX200_FDMA_PCTRL              Ethernet SwitchFetch DMA Port Control Register */
-+//	{0x2A00,	 3,	 2,	0x18}, /* XRX200_FDMA_PCTRL_VLANMOD      VLAN Modification Enable */
-+//	{0x2A00,	 2,	 1,	0x18}, /* XRX200_FDMA_PCTRL_DSCPRM       DSCP Re-marking Enable */
-+//	{0x2A00,	 1,	 1,	0x18}, /* XRX200_FDMA_PCTRL_STEN         Special Tag Insertion Enable */
-+//	{0x2A00,	 0,	 1,	0x18}, /* XRX200_FDMA_PCTRL_EN           FDMA Port Enable */
-+//	{0x2A04,	 0,	16,	0x18}, /* XRX200_FDMA_PRIO               Ethernet SwitchFetch DMA Port Priority Register */
-+//	{0x2A04,	 0,	 2,	0x18}, /* XRX200_FDMA_PRIO_PRIO          FDMA PRIO */
-+//	{0x2A08,	 0,	16,	0x18}, /* XRX200_FDMA_PSTAT0             Ethernet SwitchFetch DMA Port Status Register 0 */
-+//	{0x2A08,	15,	 1,	0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL   Port Egress Packet Available */
-+//	{0x2A08,	14,	 1,	0x18}, /* XRX200_FDMA_PSTAT0_POK         Port Status OK */
-+//	{0x2A08,	 0,	 6,	0x18}, /* XRX200_FDMA_PSTAT0_PSEG        Port Egress Segment Count */
-+//	{0x2A0C,	 0,	16,	0x18}, /* XRX200_FDMA_PSTAT1_HDR         Ethernet SwitchFetch DMA Port Status Register 1 */
-+//	{0x2A0C,	 0,	10,	0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR     Header Pointer */
-+//	{0x2A10,	 0,	16,	0x18}, /* XRX200_FDMA_TSTAMP0            Egress TimeStamp Register 0 */
-+//	{0x2A10,	 0,	16,	0x18}, /* XRX200_FDMA_TSTAMP0_TSTL       Time Stamp [15:0] */
-+//	{0x2A14,	 0,	16,	0x18}, /* XRX200_FDMA_TSTAMP1            Egress TimeStamp Register 1 */
-+//	{0x2A14,	 0,	16,	0x18}, /* XRX200_FDMA_TSTAMP1_TSTH       Time Stamp [31:16] */
-+//	{0x2D00,	 0,	16,	0x00}, /* XRX200_SDMA_CTRL               Ethernet Switch StoreDMA Control Register */
-+//	{0x2D00,	 0,	 1,	0x00}, /* XRX200_SDMA_CTRL_TSTEN         Time Stamp Enable */
-+//	{0x2D04,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR1             SDMA Flow Control Threshold1 Register */
-+//	{0x2D04,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR1_THR1        Threshold 1 */
-+//	{0x2D08,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR2             SDMA Flow Control Threshold2 Register */
-+//	{0x2D08,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR2_THR2        Threshold 2 */
-+//	{0x2D0C,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR3             SDMA Flow Control Threshold3 Register */
-+//	{0x2D0C,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR3_THR3        Threshold 3 */
-+//	{0x2D10,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR4             SDMA Flow Control Threshold4 Register */
-+//	{0x2D10,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR4_THR4        Threshold 4 */
-+//	{0x2D14,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR5             SDMA Flow Control Threshold5 Register */
-+//	{0x2D14,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR5_THR5        Threshold 5 */
-+//	{0x2D18,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR6             SDMA Flow Control Threshold6 Register */
-+//	{0x2D18,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR6_THR6        Threshold 6 */
-+//	{0x2D1C,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR7             SDMA Flow Control Threshold7 Register */
-+//	{0x2D1C,	 0,	11,	0x00}, /* XRX200_SDMA_FCTHR7_THR7        Threshold 7 */
-+//	{0x2D20,	 0,	16,	0x00}, /* XRX200_SDMA_STAT_0             SDMA Status Register0 */
-+//	{0x2D20,	 4,	 3,	0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL    Back Pressure Status */
-+//	{0x2D20,	 2,	 2,	0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT     Back Pressure Status */
-+//	{0x2D20,	 0,	 2,	0x00}, /* XRX200_SDMA_STAT_0_DROP        Back Pressure Status */
-+//	{0x2D24,	 0,	16,	0x00}, /* XRX200_SDMA_STAT_1             SDMA Status Register1 */
-+//	{0x2D24,	 0,	10,	0x00}, /* XRX200_SDMA_STAT_1_FILL        Buffer Filling Level */
-+//	{0x2D28,	 0,	16,	0x00}, /* XRX200_SDMA_STAT_2             SDMA Status Register2 */
-+//	{0x2D28,	 0,	16,	0x00}, /* XRX200_SDMA_STAT_2_FSMS        FSM states status */
-+//	{0x2D2C,	 0,	16,	0x00}, /* XRX200_SDMA_IER                SDMA Interrupt Enable Register */
-+//	{0x2D2C,	15,	 1,	0x00}, /* XRX200_SDMA_IER_BPEX           Buffer Pointers Exceeded */
-+//	{0x2D2C,	14,	 1,	0x00}, /* XRX200_SDMA_IER_BFULL          Buffer Full */
-+//	{0x2D2C,	13,	 1,	0x00}, /* XRX200_SDMA_IER_FERR           Frame Error */
-+//	{0x2D2C,	 0,	 8,	0x00}, /* XRX200_SDMA_IER_FRX            Frame Received Successfully */
-+//	{0x2D30,	 0,	16,	0x00}, /* XRX200_SDMA_ISR                SDMA Interrupt Status Register */
-+//	{0x2D30,	15,	 1,	0x00}, /* XRX200_SDMA_ISR_BPEX           Packet Descriptors Exceeded */
-+//	{0x2D30,	14,	 1,	0x00}, /* XRX200_SDMA_ISR_BFULL          Buffer Full */
-+//	{0x2D30,	13,	 1,	0x00}, /* XRX200_SDMA_ISR_FERR           Frame Error */
-+//	{0x2D30,	 0,	 8,	0x00}, /* XRX200_SDMA_ISR_FRX            Frame Received Successfully */
-+//	{0x2F00,	 0,	16,	0x18}, /* XRX200_SDMA_PCTRL              Ethernet SwitchStore DMA Port Control Register */
-+//	{0x2F00,	13,	 2,	0x18}, /* XRX200_SDMA_PCTRL_DTHR         Drop Threshold Selection */
-+//	{0x2F00,	11,	 2,	0x18}, /* XRX200_SDMA_PCTRL_PTHR         Pause Threshold Selection */
-+//	{0x2F00,	10,	 1,	0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD      Forward PHY Error Frames */
-+//	{0x2F00,	 9,	 1,	0x18}, /* XRX200_SDMA_PCTRL_ALGFWD       Forward Alignment Error Frames */
-+//	{0x2F00,	 8,	 1,	0x18}, /* XRX200_SDMA_PCTRL_LENFWD       Forward Length Errored Frames */
-+//	{0x2F00,	 7,	 1,	0x18}, /* XRX200_SDMA_PCTRL_OSFWD        Forward Oversized Frames */
-+//	{0x2F00,	 6,	 1,	0x18}, /* XRX200_SDMA_PCTRL_USFWD        Forward Undersized Frames */
-+//	{0x2F00,	 5,	 1,	0x18}, /* XRX200_SDMA_PCTRL_FCSIGN       Ignore FCS Errors */
-+//	{0x2F00,	 4,	 1,	0x18}, /* XRX200_SDMA_PCTRL_FCSFWD       Forward FCS Errored Frames */
-+//	{0x2F00,	 3,	 1,	0x18}, /* XRX200_SDMA_PCTRL_PAUFWD       Pause Frame Forwarding */
-+//	{0x2F00,	 2,	 1,	0x18}, /* XRX200_SDMA_PCTRL_MFCEN        Metering Flow Control Enable */
-+//	{0x2F00,	 1,	 1,	0x18}, /* XRX200_SDMA_PCTRL_FCEN         Flow Control Enable */
-+//	{0x2F00,	 0,	 1,	0x18}, /* XRX200_SDMA_PCTRL_PEN          Port Enable */
-+//	{0x2F04,	 0,	16,	0x18}, /* XRX200_SDMA_PRIO               Ethernet SwitchStore DMA Port Priority Register */
-+//	{0x2F04,	 0,	 2,	0x18}, /* XRX200_SDMA_PRIO_PRIO          SDMA PRIO */
-+//	{0x2F08,	 0,	16,	0x18}, /* XRX200_SDMA_PSTAT0_HDR         Ethernet SwitchStore DMA Port Status Register 0 */
-+//	{0x2F08,	 0,	10,	0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR     Port Ingress Queue Header Pointer */
-+//	{0x2F0C,	 0,	16,	0x18}, /* XRX200_SDMA_PSTAT1             Ethernet SwitchStore DMA Port Status Register 1 */
-+//	{0x2F0C,	 0,	10,	0x18}, /* XRX200_SDMA_PSTAT1_PPKT        Port Ingress Packet Count */
-+//	{0x2F10,	 0,	16,	0x18}, /* XRX200_SDMA_TSTAMP0            Ingress TimeStamp Register 0 */
-+//	{0x2F10,	 0,	16,	0x18}, /* XRX200_SDMA_TSTAMP0_TSTL       Time Stamp [15:0] */
-+//	{0x2F14,	 0,	16,	0x18}, /* XRX200_SDMA_TSTAMP1            Ingress TimeStamp Register 1 */
-+//	{0x2F14,	 0,	16,	0x18}, /* XRX200_SDMA_TSTAMP1_TSTH       Time Stamp [31:16] */
-+};
-+
-+
diff --git a/target/linux/lantiq/patches-3.18/0026-NET-multi-phy-support.patch b/target/linux/lantiq/patches-3.18/0026-NET-multi-phy-support.patch
deleted file mode 100644
index 5943602adb..0000000000
--- a/target/linux/lantiq/patches-3.18/0026-NET-multi-phy-support.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 26/36] NET: multi phy support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/phy.c |    9 ++++++---
- include/linux/phy.h   |    1 +
- 2 files changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -838,7 +838,8 @@ void phy_state_machine(struct work_struc
- 		/* If the link is down, give up on negotiation for now */
- 		if (!phydev->link) {
- 			phydev->state = PHY_NOLINK;
--			netif_carrier_off(phydev->attached_dev);
-+			if (!phydev->no_auto_carrier_off)
-+				netif_carrier_off(phydev->attached_dev);
- 			phydev->adjust_link(phydev->attached_dev);
- 			break;
- 		}
-@@ -911,7 +912,8 @@ void phy_state_machine(struct work_struc
- 			netif_carrier_on(phydev->attached_dev);
- 		} else {
- 			phydev->state = PHY_NOLINK;
--			netif_carrier_off(phydev->attached_dev);
-+			if (!phydev->no_auto_carrier_off)
-+				netif_carrier_off(phydev->attached_dev);
- 		}
- 
- 		phydev->adjust_link(phydev->attached_dev);
-@@ -923,7 +925,8 @@ void phy_state_machine(struct work_struc
- 	case PHY_HALTED:
- 		if (phydev->link) {
- 			phydev->link = 0;
--			netif_carrier_off(phydev->attached_dev);
-+			if (!phydev->no_auto_carrier_off)
-+				netif_carrier_off(phydev->attached_dev);
- 			phydev->adjust_link(phydev->attached_dev);
- 			do_suspend = true;
- 		}
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -364,6 +364,7 @@ struct phy_device {
- 	bool is_c45;
- 	bool is_internal;
- 	bool has_fixups;
-+	bool no_auto_carrier_off;
- 
- 	enum phy_state state;
- 
diff --git a/target/linux/lantiq/patches-3.18/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-3.18/0028-NET-lantiq-various-etop-fixes.patch
deleted file mode 100644
index 6a752f9725..0000000000
--- a/target/linux/lantiq/patches-3.18/0028-NET-lantiq-various-etop-fixes.patch
+++ /dev/null
@@ -1,908 +0,0 @@
-From 870ed9cae083ff8a60a739ef7e74c5a1800533be Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 9 Sep 2014 22:45:34 +0200
-Subject: [PATCH 28/36] NET: lantiq: various etop fixes
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/ethernet/lantiq_etop.c |  555 +++++++++++++++++++++++++-----------
- 1 file changed, 389 insertions(+), 166 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -11,7 +11,7 @@
-  *   You should have received a copy of the GNU General Public License
-  *   along with this program; if not, see <http://www.gnu.org/licenses/>.
-  *
-- *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ *   Copyright (C) 2011-12 John Crispin <blogic@openwrt.org>
-  */
- 
- #include <linux/kernel.h>
-@@ -30,11 +30,16 @@
- #include <linux/mm.h>
- #include <linux/platform_device.h>
- #include <linux/ethtool.h>
-+#include <linux/if_vlan.h>
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
- #include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_platform.h>
- 
- #include <asm/checksum.h>
- 
-@@ -42,7 +47,7 @@
- #include <xway_dma.h>
- #include <lantiq_platform.h>
- 
--#define LTQ_ETOP_MDIO		0x11804
-+#define LTQ_ETOP_MDIO_ACC	0x11804
- #define MDIO_REQUEST		0x80000000
- #define MDIO_READ		0x40000000
- #define MDIO_ADDR_MASK		0x1f
-@@ -51,44 +56,91 @@
- #define MDIO_REG_OFFSET		0x10
- #define MDIO_VAL_MASK		0xffff
- 
--#define PPE32_CGEN		0x800
--#define LQ_PPE32_ENET_MAC_CFG	0x1840
-+#define LTQ_ETOP_MDIO_CFG       0x11800
-+#define MDIO_CFG_MASK           0x6
-+
-+#define LTQ_ETOP_CFG            0x11808
-+#define LTQ_ETOP_IGPLEN         0x11820
-+#define LTQ_ETOP_MAC_CFG	0x11840
- 
- #define LTQ_ETOP_ENETS0		0x11850
- #define LTQ_ETOP_MAC_DA0	0x1186C
- #define LTQ_ETOP_MAC_DA1	0x11870
--#define LTQ_ETOP_CFG		0x16020
--#define LTQ_ETOP_IGPLEN		0x16080
-+
-+#define MAC_CFG_MASK		0xfff
-+#define MAC_CFG_CGEN		(1 << 11)
-+#define MAC_CFG_DUPLEX		(1 << 2)
-+#define MAC_CFG_SPEED		(1 << 1)
-+#define MAC_CFG_LINK		(1 << 0)
- 
- #define MAX_DMA_CHAN		0x8
- #define MAX_DMA_CRC_LEN		0x4
- #define MAX_DMA_DATA_LEN	0x600
- 
- #define ETOP_FTCU		BIT(28)
--#define ETOP_MII_MASK		0xf
--#define ETOP_MII_NORMAL		0xd
--#define ETOP_MII_REVERSE	0xe
- #define ETOP_PLEN_UNDER		0x40
--#define ETOP_CGEN		0x800
-+#define ETOP_CFG_MII0		0x01
- 
--/* use 2 static channels for TX/RX */
--#define LTQ_ETOP_TX_CHANNEL	1
--#define LTQ_ETOP_RX_CHANNEL	6
--#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
--#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
-+#define ETOP_CFG_MASK           0xfff
-+#define ETOP_CFG_FEN0		(1 << 8)
-+#define ETOP_CFG_SEN0		(1 << 6)
-+#define ETOP_CFG_OFF1		(1 << 3)
-+#define ETOP_CFG_REMII0		(1 << 1)
-+#define ETOP_CFG_OFF0		(1 << 0)
-+
-+#define LTQ_GBIT_MDIO_CTL	0xCC
-+#define LTQ_GBIT_MDIO_DATA	0xd0
-+#define LTQ_GBIT_GCTL0		0x68
-+#define LTQ_GBIT_PMAC_HD_CTL	0x8c
-+#define LTQ_GBIT_P0_CTL		0x4
-+#define LTQ_GBIT_PMAC_RX_IPG	0xa8
-+#define LTQ_GBIT_RGMII_CTL	0x78
-+
-+#define PMAC_HD_CTL_AS		(1 << 19)
-+#define PMAC_HD_CTL_RXSH	(1 << 22)
-+
-+/* Switch Enable (0=disable, 1=enable) */
-+#define GCTL0_SE		0x80000000
-+/* Disable MDIO auto polling (0=disable, 1=enable) */
-+#define PX_CTL_DMDIO		0x00400000
-+
-+/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */
-+#define MDC_CLOCK_MASK		0xff000000
-+#define MDC_CLOCK_OFFSET	24
-+
-+/* register information for the gbit's MDIO bus */
-+#define MDIO_XR9_REQUEST	0x00008000
-+#define MDIO_XR9_READ		0x00000800
-+#define MDIO_XR9_WRITE		0x00000400
-+#define MDIO_XR9_REG_MASK	0x1f
-+#define MDIO_XR9_ADDR_MASK	0x1f
-+#define MDIO_XR9_RD_MASK	0xffff
-+#define MDIO_XR9_REG_OFFSET	0
-+#define MDIO_XR9_ADDR_OFFSET	5
-+#define MDIO_XR9_WR_OFFSET	16
- 
-+#define LTQ_DMA_ETOP	((of_machine_is_compatible("lantiq,ase")) ? \
-+			(INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
-+
-+/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
- #define ltq_etop_r32(x)		ltq_r32(ltq_etop_membase + (x))
- #define ltq_etop_w32(x, y)	ltq_w32(x, ltq_etop_membase + (y))
- #define ltq_etop_w32_mask(x, y, z)	\
- 		ltq_w32_mask(x, y, ltq_etop_membase + (z))
- 
--#define DRV_VERSION	"1.0"
-+#define ltq_gbit_r32(x)		ltq_r32(ltq_gbit_membase + (x))
-+#define ltq_gbit_w32(x, y)	ltq_w32(x, ltq_gbit_membase + (y))
-+#define ltq_gbit_w32_mask(x, y, z)	\
-+		ltq_w32_mask(x, y, ltq_gbit_membase + (z))
-+
-+#define DRV_VERSION	"1.2"
- 
- static void __iomem *ltq_etop_membase;
-+static void __iomem *ltq_gbit_membase;
- 
- struct ltq_etop_chan {
--	int idx;
- 	int tx_free;
-+	int irq;
- 	struct net_device *netdev;
- 	struct napi_struct napi;
- 	struct ltq_dma_channel dma;
-@@ -98,22 +150,35 @@ struct ltq_etop_chan {
- struct ltq_etop_priv {
- 	struct net_device *netdev;
- 	struct platform_device *pdev;
--	struct ltq_eth_data *pldata;
- 	struct resource *res;
- 
- 	struct mii_bus *mii_bus;
- 	struct phy_device *phydev;
- 
--	struct ltq_etop_chan ch[MAX_DMA_CHAN];
--	int tx_free[MAX_DMA_CHAN >> 1];
-+	struct ltq_etop_chan txch;
-+	struct ltq_etop_chan rxch;
-+
-+	int tx_irq;
-+	int rx_irq;
-+
-+	unsigned char mac[6];
-+	int mii_mode;
- 
- 	spinlock_t lock;
-+
-+	struct clk *clk_ppe;
-+	struct clk *clk_switch;
-+	struct clk *clk_ephy;
-+	struct clk *clk_ephycgu;
- };
- 
-+static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
-+				int phy_reg, u16 phy_data);
-+
- static int
- ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
- {
--	ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
-+	ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
- 	if (!ch->skb[ch->dma.desc])
- 		return -ENOMEM;
- 	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-@@ -148,8 +213,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
- 	spin_unlock_irqrestore(&priv->lock, flags);
- 
- 	skb_put(skb, len);
-+	skb->dev = ch->netdev;
- 	skb->protocol = eth_type_trans(skb, ch->netdev);
- 	netif_receive_skb(skb);
-+	ch->netdev->stats.rx_packets++;
-+	ch->netdev->stats.rx_bytes += len;
- }
- 
- static int
-@@ -157,8 +225,10 @@ ltq_etop_poll_rx(struct napi_struct *nap
- {
- 	struct ltq_etop_chan *ch = container_of(napi,
- 				struct ltq_etop_chan, napi);
-+	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
- 	int rx = 0;
- 	int complete = 0;
-+	unsigned long flags;
- 
- 	while ((rx < budget) && !complete) {
- 		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-@@ -172,7 +242,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
- 	}
- 	if (complete || !rx) {
- 		napi_complete(&ch->napi);
-+		spin_lock_irqsave(&priv->lock, flags);
- 		ltq_dma_ack_irq(&ch->dma);
-+		spin_unlock_irqrestore(&priv->lock, flags);
- 	}
- 	return rx;
- }
-@@ -184,12 +256,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
- 		container_of(napi, struct ltq_etop_chan, napi);
- 	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
- 	struct netdev_queue *txq =
--		netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
-+		netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
- 	unsigned long flags;
- 
- 	spin_lock_irqsave(&priv->lock, flags);
- 	while ((ch->dma.desc_base[ch->tx_free].ctl &
- 			(LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+		ch->netdev->stats.tx_packets++;
-+		ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len;
- 		dev_kfree_skb_any(ch->skb[ch->tx_free]);
- 		ch->skb[ch->tx_free] = NULL;
- 		memset(&ch->dma.desc_base[ch->tx_free], 0,
-@@ -202,7 +276,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
- 	if (netif_tx_queue_stopped(txq))
- 		netif_tx_start_queue(txq);
- 	napi_complete(&ch->napi);
-+	spin_lock_irqsave(&priv->lock, flags);
- 	ltq_dma_ack_irq(&ch->dma);
-+	spin_unlock_irqrestore(&priv->lock, flags);
- 	return 1;
- }
- 
-@@ -210,9 +286,10 @@ static irqreturn_t
- ltq_etop_dma_irq(int irq, void *_priv)
- {
- 	struct ltq_etop_priv *priv = _priv;
--	int ch = irq - LTQ_DMA_CH0_INT;
--
--	napi_schedule(&priv->ch[ch].napi);
-+	if (irq == priv->txch.dma.irq)
-+		napi_schedule(&priv->txch.napi);
-+	else
-+		napi_schedule(&priv->rxch.napi);
- 	return IRQ_HANDLED;
- }
- 
-@@ -224,7 +301,7 @@ ltq_etop_free_channel(struct net_device
- 	ltq_dma_free(&ch->dma);
- 	if (ch->dma.irq)
- 		free_irq(ch->dma.irq, priv);
--	if (IS_RX(ch->idx)) {
-+	if (ch == &priv->txch) {
- 		int desc;
- 		for (desc = 0; desc < LTQ_DESC_NUM; desc++)
- 			dev_kfree_skb_any(ch->skb[ch->dma.desc]);
-@@ -235,65 +312,133 @@ static void
- ltq_etop_hw_exit(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
- 
--	ltq_pmu_disable(PMU_PPE);
--	for (i = 0; i < MAX_DMA_CHAN; i++)
--		if (IS_TX(i) || IS_RX(i))
--			ltq_etop_free_channel(dev, &priv->ch[i]);
-+	clk_disable(priv->clk_ppe);
-+
-+	if (of_machine_is_compatible("lantiq,ar9"))
-+		clk_disable(priv->clk_switch);
-+
-+	if (of_machine_is_compatible("lantiq,ase")) {
-+		clk_disable(priv->clk_ephy);
-+		clk_disable(priv->clk_ephycgu);
-+	}
-+
-+	ltq_etop_free_channel(dev, &priv->txch);
-+	ltq_etop_free_channel(dev, &priv->rxch);
-+}
-+
-+static void
-+ltq_etop_gbit_init(struct net_device *dev)
-+{
-+	struct ltq_etop_priv *priv = netdev_priv(dev);
-+
-+	clk_enable(priv->clk_switch);
-+
-+	/* enable gbit port0 on the SoC */
-+	ltq_gbit_w32_mask((1 << 17), (1 << 18), LTQ_GBIT_P0_CTL);
-+
-+	ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
-+	/* disable MDIO auto polling mode */
-+	ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
-+	/* set 1522 packet size */
-+	ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
-+	/* disable pmac & dmac headers */
-+	ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
-+		LTQ_GBIT_PMAC_HD_CTL);
-+	/* Due to traffic halt when burst length 8,
-+		replace default IPG value with 0x3B */
-+	ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
-+	/* set mdc clock to 2.5 MHz */
-+	ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET,
-+		LTQ_GBIT_RGMII_CTL);
- }
- 
- static int
- ltq_etop_hw_init(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
-+	int mii_mode = priv->mii_mode;
- 
--	ltq_pmu_enable(PMU_PPE);
-+	clk_enable(priv->clk_ppe);
-+
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		ltq_etop_gbit_init(dev);
-+		/* force the etops link to the gbit to MII */
-+		mii_mode = PHY_INTERFACE_MODE_MII;
-+	}
-+	ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG);
-+	ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX |
-+			MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG);
- 
--	switch (priv->pldata->mii_mode) {
-+	switch (mii_mode) {
- 	case PHY_INTERFACE_MODE_RMII:
--		ltq_etop_w32_mask(ETOP_MII_MASK,
--			ETOP_MII_REVERSE, LTQ_ETOP_CFG);
-+		ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_REMII0 | ETOP_CFG_OFF1 |
-+			ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
- 		break;
- 
- 	case PHY_INTERFACE_MODE_MII:
--		ltq_etop_w32_mask(ETOP_MII_MASK,
--			ETOP_MII_NORMAL, LTQ_ETOP_CFG);
-+		ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_OFF1 |
-+			ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
- 		break;
- 
- 	default:
-+		if (of_machine_is_compatible("lantiq,ase")) {
-+			clk_enable(priv->clk_ephy);
-+			/* disable external MII */
-+			ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
-+			/* enable clock for internal PHY */
-+			clk_enable(priv->clk_ephycgu);
-+			/* we need to write this magic to the internal phy to
-+			   make it work */
-+			ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
-+			pr_info("Selected EPHY mode\n");
-+			break;
-+		}
- 		netdev_err(dev, "unknown mii mode %d\n",
--			priv->pldata->mii_mode);
-+			mii_mode);
- 		return -ENOTSUPP;
- 	}
- 
--	/* enable crc generation */
--	ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
-+	return 0;
-+}
-+
-+static int
-+ltq_etop_dma_init(struct net_device *dev)
-+{
-+	struct ltq_etop_priv *priv = netdev_priv(dev);
-+	int tx = priv->tx_irq - LTQ_DMA_ETOP;
-+	int rx = priv->rx_irq - LTQ_DMA_ETOP;
-+	int err;
- 
- 	ltq_dma_init_port(DMA_PORT_ETOP);
- 
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		int irq = LTQ_DMA_CH0_INT + i;
--		struct ltq_etop_chan *ch = &priv->ch[i];
--
--		ch->idx = ch->dma.nr = i;
--
--		if (IS_TX(i)) {
--			ltq_dma_alloc_tx(&ch->dma);
--			request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
--		} else if (IS_RX(i)) {
--			ltq_dma_alloc_rx(&ch->dma);
--			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
--					ch->dma.desc++)
--				if (ltq_etop_alloc_skb(ch))
--					return -ENOMEM;
--			ch->dma.desc = 0;
--			request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
-+	priv->txch.dma.nr = tx;
-+	ltq_dma_alloc_tx(&priv->txch.dma);
-+	err = request_irq(priv->tx_irq, ltq_etop_dma_irq, 0, "eth_tx", priv);
-+	if (err) {
-+		netdev_err(dev, "failed to allocate tx irq\n");
-+		goto err_out;
-+	}
-+	priv->txch.dma.irq = priv->tx_irq;
-+
-+	priv->rxch.dma.nr = rx;
-+	ltq_dma_alloc_rx(&priv->rxch.dma);
-+	for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
-+			priv->rxch.dma.desc++) {
-+		if (ltq_etop_alloc_skb(&priv->rxch)) {
-+			netdev_err(dev, "failed to allocate skbs\n");
-+			err = -ENOMEM;
-+			goto err_out;
- 		}
--		ch->dma.irq = irq;
- 	}
--	return 0;
-+	priv->rxch.dma.desc = 0;
-+	err = request_irq(priv->rx_irq, ltq_etop_dma_irq, 0, "eth_rx", priv);
-+	if (err)
-+		netdev_err(dev, "failed to allocate rx irq\n");
-+	else
-+		priv->rxch.dma.irq = priv->rx_irq;
-+err_out:
-+	return err;
- }
- 
- static void
-@@ -309,7 +454,10 @@ ltq_etop_get_settings(struct net_device
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
- 
--	return phy_ethtool_gset(priv->phydev, cmd);
-+	if (priv->phydev)
-+		return phy_ethtool_gset(priv->phydev, cmd);
-+	else
-+		return 0;
- }
- 
- static int
-@@ -317,7 +465,10 @@ ltq_etop_set_settings(struct net_device
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
- 
--	return phy_ethtool_sset(priv->phydev, cmd);
-+	if (priv->phydev)
-+		return phy_ethtool_sset(priv->phydev, cmd);
-+	else
-+		return 0;
- }
- 
- static int
-@@ -325,7 +476,10 @@ ltq_etop_nway_reset(struct net_device *d
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
- 
--	return phy_start_aneg(priv->phydev);
-+	if (priv->phydev)
-+		return phy_start_aneg(priv->phydev);
-+	else
-+		return 0;
- }
- 
- static const struct ethtool_ops ltq_etop_ethtool_ops = {
-@@ -336,6 +490,39 @@ static const struct ethtool_ops ltq_etop
- };
- 
- static int
-+ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
-+		int phy_reg, u16 phy_data)
-+{
-+	u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
-+		(phy_data << MDIO_XR9_WR_OFFSET) |
-+		((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
-+		((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
-+
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	return 0;
-+}
-+
-+static int
-+ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
-+{
-+	u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
-+		((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
-+		((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
-+
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
-+	return val;
-+}
-+
-+static int
- ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
- {
- 	u32 val = MDIO_REQUEST |
-@@ -343,9 +530,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
- 		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
- 		phy_data;
- 
--	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
-+	while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
- 		;
--	ltq_etop_w32(val, LTQ_ETOP_MDIO);
-+	ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
- 	return 0;
- }
- 
-@@ -356,12 +543,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
- 		((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
- 		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
- 
--	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
-+	while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
- 		;
--	ltq_etop_w32(val, LTQ_ETOP_MDIO);
--	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
-+	ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
-+	while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
- 		;
--	val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK;
-+	val = ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_VAL_MASK;
- 	return val;
- }
- 
-@@ -376,14 +563,18 @@ ltq_etop_mdio_probe(struct net_device *d
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
- 	struct phy_device *phydev = NULL;
--	int phy_addr;
-+	u32 phy_supported =  (SUPPORTED_10baseT_Half
-+			| SUPPORTED_10baseT_Full
-+			| SUPPORTED_100baseT_Half
-+			| SUPPORTED_100baseT_Full
-+			| SUPPORTED_Autoneg
-+			| SUPPORTED_MII
-+			| SUPPORTED_TP);
- 
--	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
--		if (priv->mii_bus->phy_map[phy_addr]) {
--			phydev = priv->mii_bus->phy_map[phy_addr];
--			break;
--		}
--	}
-+	if (of_machine_is_compatible("lantiq,ase"))
-+		phydev = priv->mii_bus->phy_map[8];
-+	else
-+		phydev = priv->mii_bus->phy_map[0];
- 
- 	if (!phydev) {
- 		netdev_err(dev, "no PHY found\n");
-@@ -391,21 +582,18 @@ ltq_etop_mdio_probe(struct net_device *d
- 	}
- 
- 	phydev = phy_connect(dev, dev_name(&phydev->dev),
--			     &ltq_etop_mdio_link, priv->pldata->mii_mode);
-+			&ltq_etop_mdio_link, priv->mii_mode);
- 
- 	if (IS_ERR(phydev)) {
- 		netdev_err(dev, "Could not attach to PHY\n");
- 		return PTR_ERR(phydev);
- 	}
- 
--	phydev->supported &= (SUPPORTED_10baseT_Half
--			      | SUPPORTED_10baseT_Full
--			      | SUPPORTED_100baseT_Half
--			      | SUPPORTED_100baseT_Full
--			      | SUPPORTED_Autoneg
--			      | SUPPORTED_MII
--			      | SUPPORTED_TP);
-+	if (of_machine_is_compatible("lantiq,ar9"))
-+		phy_supported |= SUPPORTED_1000baseT_Half
-+			| SUPPORTED_1000baseT_Full;
- 
-+	phydev->supported &= phy_supported;
- 	phydev->advertising = phydev->supported;
- 	priv->phydev = phydev;
- 	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
-@@ -430,8 +618,13 @@ ltq_etop_mdio_init(struct net_device *de
- 	}
- 
- 	priv->mii_bus->priv = dev;
--	priv->mii_bus->read = ltq_etop_mdio_rd;
--	priv->mii_bus->write = ltq_etop_mdio_wr;
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
-+		priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
-+	} else {
-+		priv->mii_bus->read = ltq_etop_mdio_rd;
-+		priv->mii_bus->write = ltq_etop_mdio_wr;
-+	}
- 	priv->mii_bus->name = "ltq_mii";
- 	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
- 		priv->pdev->name, priv->pdev->id);
-@@ -480,17 +673,19 @@ static int
- ltq_etop_open(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
-+	unsigned long flags;
- 
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		struct ltq_etop_chan *ch = &priv->ch[i];
-+	napi_enable(&priv->txch.napi);
-+	napi_enable(&priv->rxch.napi);
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+	ltq_dma_open(&priv->txch.dma);
-+	ltq_dma_open(&priv->rxch.dma);
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+
-+	if (priv->phydev)
-+		phy_start(priv->phydev);
- 
--		if (!IS_TX(i) && (!IS_RX(i)))
--			continue;
--		ltq_dma_open(&ch->dma);
--		napi_enable(&ch->napi);
--	}
--	phy_start(priv->phydev);
- 	netif_tx_start_all_queues(dev);
- 	return 0;
- }
-@@ -499,18 +694,19 @@ static int
- ltq_etop_stop(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
-+	unsigned long flags;
- 
- 	netif_tx_stop_all_queues(dev);
--	phy_stop(priv->phydev);
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		struct ltq_etop_chan *ch = &priv->ch[i];
--
--		if (!IS_RX(i) && !IS_TX(i))
--			continue;
--		napi_disable(&ch->napi);
--		ltq_dma_close(&ch->dma);
--	}
-+	if (priv->phydev)
-+		phy_stop(priv->phydev);
-+	napi_disable(&priv->txch.napi);
-+	napi_disable(&priv->rxch.napi);
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+	ltq_dma_close(&priv->txch.dma);
-+	ltq_dma_close(&priv->rxch.dma);
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+
- 	return 0;
- }
- 
-@@ -520,16 +716,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
- 	int queue = skb_get_queue_mapping(skb);
- 	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
--	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
--	int len;
-+	struct ltq_dma_desc *desc =
-+		&priv->txch.dma.desc_base[priv->txch.dma.desc];
- 	unsigned long flags;
- 	u32 byte_offset;
-+	int len;
- 
- 	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- 
--	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
--		dev_kfree_skb_any(skb);
-+	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
-+			priv->txch.skb[priv->txch.dma.desc]) {
- 		netdev_err(dev, "tx ring full\n");
- 		netif_tx_stop_queue(txq);
- 		return NETDEV_TX_BUSY;
-@@ -537,7 +733,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
- 
- 	/* dma needs to start on a 16 byte aligned address */
- 	byte_offset = CPHYSADDR(skb->data) % 16;
--	ch->skb[ch->dma.desc] = skb;
-+	priv->txch.skb[priv->txch.dma.desc] = skb;
- 
- 	dev->trans_start = jiffies;
- 
-@@ -547,11 +743,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
- 	wmb();
- 	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
- 		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
--	ch->dma.desc++;
--	ch->dma.desc %= LTQ_DESC_NUM;
-+	priv->txch.dma.desc++;
-+	priv->txch.dma.desc %= LTQ_DESC_NUM;
- 	spin_unlock_irqrestore(&priv->lock, flags);
- 
--	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
-+	if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
- 		netif_tx_stop_queue(txq);
- 
- 	return NETDEV_TX_OK;
-@@ -566,8 +762,10 @@ ltq_etop_change_mtu(struct net_device *d
- 		struct ltq_etop_priv *priv = netdev_priv(dev);
- 		unsigned long flags;
- 
-+		int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
-+
- 		spin_lock_irqsave(&priv->lock, flags);
--		ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
-+		ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max,
- 			LTQ_ETOP_IGPLEN);
- 		spin_unlock_irqrestore(&priv->lock, flags);
- 	}
-@@ -638,6 +836,9 @@ ltq_etop_init(struct net_device *dev)
- 	if (err)
- 		goto err_hw;
- 	ltq_etop_change_mtu(dev, 1500);
-+	err = ltq_etop_dma_init(dev);
-+	if (err)
-+		goto err_hw;
- 
- 	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
- 	if (!is_valid_ether_addr(mac.sa_data)) {
-@@ -655,9 +856,10 @@ ltq_etop_init(struct net_device *dev)
- 		dev->addr_assign_type = NET_ADDR_RANDOM;
- 
- 	ltq_etop_set_multicast_list(dev);
--	err = ltq_etop_mdio_init(dev);
--	if (err)
--		goto err_netdev;
-+	if (!ltq_etop_mdio_init(dev))
-+		dev->ethtool_ops = &ltq_etop_ethtool_ops;
-+	else
-+		pr_warn("etop: mdio probe failed\n");;
- 	return 0;
- 
- err_netdev:
-@@ -677,6 +879,9 @@ ltq_etop_tx_timeout(struct net_device *d
- 	err = ltq_etop_hw_init(dev);
- 	if (err)
- 		goto err_hw;
-+	err = ltq_etop_dma_init(dev);
-+	if (err)
-+		goto err_hw;
- 	dev->trans_start = jiffies;
- 	netif_wake_queue(dev);
- 	return;
-@@ -700,14 +905,18 @@ static const struct net_device_ops ltq_e
- 	.ndo_tx_timeout = ltq_etop_tx_timeout,
- };
- 
--static int __init
--ltq_etop_probe(struct platform_device *pdev)
-+static int ltq_etop_probe(struct platform_device *pdev)
- {
- 	struct net_device *dev;
- 	struct ltq_etop_priv *priv;
--	struct resource *res;
-+	struct resource *res, *gbit_res, irqres[2];
- 	int err;
--	int i;
-+
-+	err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2);
-+	if (err != 2) {
-+		dev_err(&pdev->dev, "failed to get etop irqs\n");
-+		return -EINVAL;
-+	}
- 
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	if (!res) {
-@@ -733,30 +942,58 @@ ltq_etop_probe(struct platform_device *p
- 		goto err_out;
- 	}
- 
--	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
--	if (!dev) {
--		err = -ENOMEM;
--		goto err_out;
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+		if (!gbit_res) {
-+			dev_err(&pdev->dev, "failed to get gbit resource\n");
-+			err = -ENOENT;
-+			goto err_out;
-+		}
-+		ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev,
-+			gbit_res->start, resource_size(gbit_res));
-+		if (!ltq_gbit_membase) {
-+			dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
-+				pdev->id);
-+			err = -ENOMEM;
-+			goto err_out;
-+		}
- 	}
-+
-+	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
- 	strcpy(dev->name, "eth%d");
- 	dev->netdev_ops = &ltq_eth_netdev_ops;
--	dev->ethtool_ops = &ltq_etop_ethtool_ops;
- 	priv = netdev_priv(dev);
- 	priv->res = res;
- 	priv->pdev = pdev;
--	priv->pldata = dev_get_platdata(&pdev->dev);
- 	priv->netdev = dev;
-+	priv->tx_irq = irqres[0].start;
-+	priv->rx_irq = irqres[1].start;
-+	priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
-+	of_get_mac_address_mtd(pdev->dev.of_node, priv->mac);
-+
-+	priv->clk_ppe = clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(priv->clk_ppe))
-+		return PTR_ERR(priv->clk_ppe);
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		priv->clk_switch = clk_get(&pdev->dev, "switch");
-+		if (IS_ERR(priv->clk_switch))
-+			return PTR_ERR(priv->clk_switch);
-+	}
-+	if (of_machine_is_compatible("lantiq,ase")) {
-+		priv->clk_ephy = clk_get(&pdev->dev, "ephy");
-+		if (IS_ERR(priv->clk_ephy))
-+			return PTR_ERR(priv->clk_ephy);
-+		priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
-+		if (IS_ERR(priv->clk_ephycgu))
-+			return PTR_ERR(priv->clk_ephycgu);
-+	}
-+
- 	spin_lock_init(&priv->lock);
- 
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		if (IS_TX(i))
--			netif_napi_add(dev, &priv->ch[i].napi,
--				ltq_etop_poll_tx, 8);
--		else if (IS_RX(i))
--			netif_napi_add(dev, &priv->ch[i].napi,
--				ltq_etop_poll_rx, 32);
--		priv->ch[i].netdev = dev;
--	}
-+	netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
-+	netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
-+	priv->txch.netdev = dev;
-+	priv->rxch.netdev = dev;
- 
- 	err = register_netdev(dev);
- 	if (err)
-@@ -785,32 +1022,23 @@ ltq_etop_remove(struct platform_device *
- 	return 0;
- }
- 
-+static const struct of_device_id ltq_etop_match[] = {
-+	{ .compatible = "lantiq,etop-xway" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_etop_match);
-+
- static struct platform_driver ltq_mii_driver = {
-+	.probe = ltq_etop_probe,
- 	.remove = ltq_etop_remove,
- 	.driver = {
- 		.name = "ltq_etop",
- 		.owner = THIS_MODULE,
-+		.of_match_table = ltq_etop_match,
- 	},
- };
- 
--int __init
--init_ltq_etop(void)
--{
--	int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
--
--	if (ret)
--		pr_err("ltq_etop: Error registering platform driver!");
--	return ret;
--}
--
--static void __exit
--exit_ltq_etop(void)
--{
--	platform_driver_unregister(&ltq_mii_driver);
--}
--
--module_init(init_ltq_etop);
--module_exit(exit_ltq_etop);
-+module_platform_driver(ltq_mii_driver);
- 
- MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
- MODULE_DESCRIPTION("Lantiq SoC ETOP");
diff --git a/target/linux/lantiq/patches-3.18/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-3.18/0030-GPIO-add-named-gpio-exports.patch
deleted file mode 100644
index 855da68285..0000000000
--- a/target/linux/lantiq/patches-3.18/0030-GPIO-add-named-gpio-exports.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 30/36] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c     |   68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib.c        |   11 +++++--
- include/asm-generic/gpio.h    |    5 +++
- include/linux/gpio/consumer.h |    8 +++++
- 4 files changed, 90 insertions(+), 2 deletions(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -22,6 +22,8 @@
- #include <linux/of_gpio.h>
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
- 
- #include "gpiolib.h"
- 
-@@ -316,3 +318,69 @@ void of_gpiochip_remove(struct gpio_chip
- 	gpiochip_remove_pin_ranges(chip);
- 	of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+	{ .compatible = "gpio-export" },
-+	{ /* sentinel */ }
-+};
-+
-+static int __init of_gpio_export_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct device_node *cnp;
-+	u32 val;
-+	int nb = 0;
-+
-+	for_each_child_of_node(np, cnp) {
-+		const char *name = NULL;
-+		int gpio;
-+		bool dmc;
-+		int max_gpio = 1;
-+		int i;
-+
-+		of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+		if (!name)
-+			max_gpio = of_gpio_count(cnp);
-+
-+		for (i = 0; i < max_gpio; i++) {
-+			unsigned flags = 0;
-+			enum of_gpio_flags of_flags;
-+
-+			gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+
-+			if (of_flags == OF_GPIO_ACTIVE_LOW)
-+				flags |= GPIOF_ACTIVE_LOW;
-+
-+			if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+				flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+			else
-+				flags |= GPIOF_IN;
-+
-+			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+				continue;
-+
-+			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+			gpio_export_with_name(gpio, dmc, name);
-+			nb++;
-+		}
-+	}
-+
-+	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+	.driver		= {
-+		.name		= "gpio-export",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(gpio_export_ids),
-+	},
-+};
-+
-+static int __init of_gpio_export_init(void)
-+{
-+	return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
-+}
-+device_initcall(of_gpio_export_init);
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -123,6 +123,12 @@ static inline int gpio_export(unsigned g
- 	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
- 
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+	return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- 				   unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -323,6 +323,7 @@ static inline int desc_to_gpio(const str
- 
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
- 
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- 		      struct gpio_desc *desc);
-@@ -331,6 +332,13 @@ void gpiod_unexport(struct gpio_desc *de
- 
- #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
- 
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+			       bool direction_may_change,
-+			       const char *name)
-+{
-+	return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- 			       bool direction_may_change)
- {
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -517,7 +517,7 @@ static struct class gpio_class = {
-  *
-  * Returns zero on success, else an error.
-  */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- 	struct gpio_chip	*chip;
- 	unsigned long		flags;
-@@ -566,6 +566,8 @@ int gpiod_export(struct gpio_desc *desc,
- 	offset = gpio_chip_hwgpio(desc);
- 	if (desc->chip->names && desc->chip->names[offset])
- 		ioname = desc->chip->names[offset];
-+	if (name)
-+		ioname = name;
- 
- 	dev = device_create_with_groups(&gpio_class, desc->chip->dev,
- 					MKDEV(0, 0), desc, gpio_groups,
-@@ -602,6 +604,12 @@ fail_unlock:
- 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- 	return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+	return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
- 
- static int match_export(struct device *dev, const void *data)
diff --git a/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
deleted file mode 100644
index 4f655db499..0000000000
--- a/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
+++ /dev/null
@@ -1,1034 +0,0 @@
-From f17e50f67fa3c77624edf2ca03fae0d50f0ce39b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:26:42 +0200
-Subject: [PATCH 31/36] I2C: MIPS: lantiq: add FALC-ON i2c bus master
-
-This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/i2c/busses/Kconfig      |   10 +
- drivers/i2c/busses/Makefile     |    1 +
- drivers/i2c/busses/i2c-lantiq.c |  747 +++++++++++++++++++++++++++++++++++++++
- drivers/i2c/busses/i2c-lantiq.h |  234 ++++++++++++
- 4 files changed, 992 insertions(+)
- create mode 100644 drivers/i2c/busses/i2c-lantiq.c
- create mode 100644 drivers/i2c/busses/i2c-lantiq.h
-
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -554,6 +554,16 @@ config I2C_KEMPLD
- 	  This driver can also be built as a module. If so, the module
- 	  will be called i2c-kempld.
- 
-+config I2C_LANTIQ
-+	tristate "Lantiq I2C interface"
-+	depends on LANTIQ && SOC_FALCON
-+	help
-+	  If you say yes to this option, support will be included for the
-+	  Lantiq I2C core.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called i2c-lantiq.
-+
- config I2C_MPC
- 	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
- 	depends on PPC
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -53,6 +53,7 @@ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic
- obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
- obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
- obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o
-+obj-$(CONFIG_I2C_LANTIQ)	+= i2c-lantiq.o
- obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
- obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
- obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-lantiq.c
-@@ -0,0 +1,747 @@
-+
-+/*
-+ * Lantiq I2C bus adapter
-+ *
-+ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h> /* for kzalloc, kfree */
-+#include <linux/i2c.h>
-+#include <linux/errno.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_i2c.h>
-+
-+#include <lantiq_soc.h>
-+#include "i2c-lantiq.h"
-+
-+/*
-+ * CURRENT ISSUES:
-+ * - no high speed support
-+ * - ten bit mode is not tested (no slave devices)
-+ */
-+
-+/* access macros */
-+#define i2c_r32(reg)	\
-+	__raw_readl(&(priv->membase)->reg)
-+#define i2c_w32(val, reg)	\
-+	__raw_writel(val, &(priv->membase)->reg)
-+#define i2c_w32_mask(clear, set, reg)	\
-+	i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg)
-+
-+#define DRV_NAME "i2c-lantiq"
-+#define DRV_VERSION "1.00"
-+
-+#define LTQ_I2C_BUSY_TIMEOUT		20 /* ms */
-+
-+#ifdef DEBUG
-+#define LTQ_I2C_XFER_TIMEOUT		(25*HZ)
-+#else
-+#define LTQ_I2C_XFER_TIMEOUT		HZ
-+#endif
-+
-+#define LTQ_I2C_IMSC_DEFAULT_MASK	(I2C_IMSC_I2C_P_INT_EN | \
-+					 I2C_IMSC_I2C_ERR_INT_EN)
-+
-+#define LTQ_I2C_ARB_LOST		(1 << 0)
-+#define LTQ_I2C_NACK			(1 << 1)
-+#define LTQ_I2C_RX_UFL			(1 << 2)
-+#define LTQ_I2C_RX_OFL			(1 << 3)
-+#define LTQ_I2C_TX_UFL			(1 << 4)
-+#define LTQ_I2C_TX_OFL			(1 << 5)
-+
-+struct ltq_i2c {
-+	struct mutex mutex;
-+
-+
-+	/* active clock settings */
-+	unsigned int input_clock;	/* clock input for i2c hardware block */
-+	unsigned int i2c_clock;		/* approximated bus clock in kHz */
-+
-+	struct clk *clk_gate;
-+	struct clk *clk_input;
-+
-+
-+	/* resources (memory and interrupts) */
-+	int irq_lb;				/* last burst irq */
-+
-+	struct lantiq_reg_i2c __iomem *membase;	/* base of mapped registers */
-+
-+	struct i2c_adapter adap;
-+	struct device *dev;
-+
-+	struct completion cmd_complete;
-+
-+
-+	/* message transfer data */
-+	struct i2c_msg *current_msg;	/* current message */
-+	int msgs_num;		/* number of messages to handle */
-+	u8 *msg_buf;		/* current buffer */
-+	u32 msg_buf_len;	/* remaining length of current buffer */
-+	int msg_err;		/* error status of the current transfer */
-+
-+
-+	/* master status codes */
-+	enum {
-+		STATUS_IDLE,
-+		STATUS_ADDR,	/* address phase */
-+		STATUS_WRITE,
-+		STATUS_READ,
-+		STATUS_READ_END,
-+		STATUS_STOP
-+	} status;
-+};
-+
-+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id);
-+
-+static inline void enable_burst_irq(struct ltq_i2c *priv)
-+{
-+	i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
-+}
-+static inline void disable_burst_irq(struct ltq_i2c *priv)
-+{
-+	i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
-+}
-+
-+static void prepare_msg_send_addr(struct ltq_i2c *priv)
-+{
-+	struct i2c_msg *msg = priv->current_msg;
-+	int rd = !!(msg->flags & I2C_M_RD);	/* extends to 0 or 1 */
-+	u16 addr = msg->addr;
-+
-+	/* new i2c_msg */
-+	priv->msg_buf = msg->buf;
-+	priv->msg_buf_len = msg->len;
-+	if (rd)
-+		priv->status = STATUS_READ;
-+	else
-+		priv->status = STATUS_WRITE;
-+
-+	/* send slave address */
-+	if (msg->flags & I2C_M_TEN) {
-+		i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
-+		i2c_w32(addr & 0xff, txd);
-+	} else {
-+		i2c_w32((addr & 0x7f) << 1 | rd, txd);
-+	}
-+}
-+
-+static void ltq_i2c_set_tx_len(struct ltq_i2c *priv)
-+{
-+	struct i2c_msg *msg = priv->current_msg;
-+	int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
-+
-+	pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T');
-+
-+	priv->status = STATUS_ADDR;
-+
-+	if (!(msg->flags & I2C_M_RD))
-+		len += msg->len;
-+	else
-+		/* set maximum received packet size (before rx int!) */
-+		i2c_w32(msg->len, mrps_ctrl);
-+	i2c_w32(len, tps_ctrl);
-+	enable_burst_irq(priv);
-+}
-+
-+static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap)
-+{
-+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+	unsigned int input_clock = clk_get_rate(priv->clk_input);
-+	u32 dec, inc = 1;
-+
-+	/* clock changed? */
-+	if (priv->input_clock == input_clock)
-+		return 0;
-+
-+	/*
-+	 * this formula is only an approximation, found by the recommended
-+	 * values in the "I2C Architecture Specification 1.7.1"
-+	 */
-+	dec = input_clock / (priv->i2c_clock * 2);
-+	if (dec <= 6)
-+		return -ENXIO;
-+
-+	i2c_w32(0, fdiv_high_cfg);
-+	i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) |
-+		(dec << I2C_FDIV_CFG_DEC_OFFSET),
-+		fdiv_cfg);
-+
-+	dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n",
-+		input_clock, priv->i2c_clock, dec);
-+
-+	priv->input_clock = input_clock;
-+	return 0;
-+}
-+
-+static int ltq_i2c_hw_init(struct i2c_adapter *adap)
-+{
-+	int ret = 0;
-+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+
-+	/* disable bus */
-+	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+#ifndef DEBUG
-+	/* set normal operation clock divider */
-+	i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
-+#else
-+	/* for debugging a higher divider value! */
-+	i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
-+#endif
-+
-+	/* setup clock */
-+	ret = ltq_i2c_hw_set_clock(adap);
-+	if (ret != 0) {
-+		dev_warn(priv->dev, "invalid clock settings\n");
-+		return ret;
-+	}
-+
-+	/* configure fifo */
-+	i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
-+		I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
-+		I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
-+		I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
-+		I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
-+		I2C_FIFO_CFG_RXBS_RXBS0,  /* rx fifo burst size is 1 word */
-+		fifo_cfg);
-+
-+	/* configure address */
-+	i2c_w32(I2C_ADDR_CFG_SOPE_EN |	/* generate stop when no more data in
-+					   the fifo */
-+		I2C_ADDR_CFG_SONA_EN |	/* generate stop when NA received */
-+		I2C_ADDR_CFG_MnS_EN |	/* we are master device */
-+		0,			/* our slave address (not used!) */
-+		addr_cfg);
-+
-+	/* enable bus */
-+	i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
-+
-+	return 0;
-+}
-+
-+static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv)
-+{
-+	unsigned long timeout;
-+
-+	timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT);
-+
-+	do {
-+		u32 stat = i2c_r32(bus_stat);
-+
-+		if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE)
-+			return 0;
-+
-+		cond_resched();
-+	} while (!time_after_eq(jiffies, timeout));
-+
-+	dev_err(priv->dev, "timeout waiting for bus ready\n");
-+	return -ETIMEDOUT;
-+}
-+
-+static void ltq_i2c_tx(struct ltq_i2c *priv, int last)
-+{
-+	if (priv->msg_buf_len && priv->msg_buf) {
-+		i2c_w32(*priv->msg_buf, txd);
-+
-+		if (--priv->msg_buf_len)
-+			priv->msg_buf++;
-+		else
-+			priv->msg_buf = NULL;
-+	} else {
-+		last = 1;
-+	}
-+
-+	if (last)
-+		disable_burst_irq(priv);
-+}
-+
-+static void ltq_i2c_rx(struct ltq_i2c *priv, int last)
-+{
-+	u32 fifo_stat, timeout;
-+	if (priv->msg_buf_len && priv->msg_buf) {
-+		timeout = 5000000;
-+		do {
-+			fifo_stat = i2c_r32(ffs_stat);
-+		} while (!fifo_stat && --timeout);
-+		if (!timeout) {
-+			last = 1;
-+			pr_debug("\nrx timeout\n");
-+			goto err;
-+		}
-+		while (fifo_stat) {
-+			*priv->msg_buf = i2c_r32(rxd);
-+			if (--priv->msg_buf_len) {
-+				priv->msg_buf++;
-+			} else {
-+				priv->msg_buf = NULL;
-+				last = 1;
-+				break;
-+			}
-+			/*
-+			 * do not read more than burst size, otherwise no "last
-+			 * burst" is generated and the transaction is blocked!
-+			 */
-+			fifo_stat = 0;
-+		}
-+	} else {
-+		last = 1;
-+	}
-+err:
-+	if (last) {
-+		disable_burst_irq(priv);
-+
-+		if (priv->status == STATUS_READ_END) {
-+			/* 
-+			 * do the STATUS_STOP and complete() here, as sometimes
-+			 * the tx_end is already seen before this is finished
-+			 */
-+			priv->status = STATUS_STOP;
-+			complete(&priv->cmd_complete);
-+		} else {
-+			i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+			priv->status = STATUS_READ_END;
-+		}
-+	}
-+}
-+
-+static void ltq_i2c_xfer_init(struct ltq_i2c *priv)
-+{
-+	/* enable interrupts */
-+	i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc);
-+
-+	/* trigger transfer of first msg */
-+	ltq_i2c_set_tx_len(priv);
-+}
-+
-+static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
-+{
-+#if defined(DEBUG)
-+	int i, j;
-+	pr_debug("Messages %d %s\n", num, rx ? "out" : "in");
-+	for (i = 0; i < num; i++) {
-+		pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i,
-+			(msgs[i].flags & I2C_M_RD) ? 'R' : 'T',
-+			msgs[i].len, msgs[i].addr);
-+		if (!(msgs[i].flags & I2C_M_RD) || rx) {
-+			for (j = 0; j < msgs[i].len; j++)
-+				pr_debug("%02X ", msgs[i].buf[j]);
-+		}
-+		pr_debug("\n");
-+	}
-+#endif
-+}
-+
-+static void ltq_i2c_release_bus(struct ltq_i2c *priv)
-+{
-+	if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
-+		i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+}
-+
-+static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
-+			   int num)
-+{
-+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+	int ret;
-+
-+	dev_dbg(priv->dev, "xfer %u messages\n", num);
-+	dump_msgs(msgs, num, 0);
-+
-+	mutex_lock(&priv->mutex);
-+
-+	init_completion(&priv->cmd_complete);
-+	priv->current_msg = msgs;
-+	priv->msgs_num = num;
-+	priv->msg_err = 0;
-+	priv->status = STATUS_IDLE;
-+
-+	/* wait for the bus to become ready */
-+	ret = ltq_i2c_wait_bus_not_busy(priv);
-+	if (ret)
-+		goto done;
-+
-+	while (priv->msgs_num) {
-+		/* start the transfers */
-+		ltq_i2c_xfer_init(priv);
-+
-+		/* wait for transfers to complete */
-+		ret = wait_for_completion_interruptible_timeout(
-+			&priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT);
-+		if (ret == 0) {
-+			dev_err(priv->dev, "controller timed out\n");
-+			ltq_i2c_hw_init(adap);
-+			ret = -ETIMEDOUT;
-+			goto done;
-+		} else if (ret < 0)
-+			goto done;
-+
-+		if (priv->msg_err) {
-+			if (priv->msg_err & LTQ_I2C_NACK)
-+				ret = -ENXIO;
-+			else
-+				ret = -EREMOTEIO;
-+			goto done;
-+		}
-+		if (--priv->msgs_num)
-+			priv->current_msg++;
-+	}
-+	/* no error? */
-+	ret = num;
-+
-+done:
-+	ltq_i2c_release_bus(priv);
-+
-+	mutex_unlock(&priv->mutex);
-+
-+	if (ret >= 0)
-+		dump_msgs(msgs, num, 1);
-+
-+	pr_debug("XFER ret %d\n", ret);
-+	return ret;
-+}
-+
-+static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id)
-+{
-+	struct ltq_i2c *priv = dev_id;
-+	struct i2c_msg *msg = priv->current_msg;
-+	int last = (irq == priv->irq_lb);
-+
-+	if (last)
-+		pr_debug("LB ");
-+	else
-+		pr_debug("B ");
-+
-+	if (msg->flags & I2C_M_RD) {
-+		switch (priv->status) {
-+		case STATUS_ADDR:
-+			pr_debug("X");
-+			prepare_msg_send_addr(priv);
-+			disable_burst_irq(priv);
-+			break;
-+		case STATUS_READ:
-+		case STATUS_READ_END:
-+			pr_debug("R");
-+			ltq_i2c_rx(priv, last);
-+			break;
-+		default:
-+			disable_burst_irq(priv);
-+			pr_warn("Status R %d\n", priv->status);
-+			break;
-+		}
-+	} else {
-+		switch (priv->status) {
-+		case STATUS_ADDR:
-+			pr_debug("x");
-+			prepare_msg_send_addr(priv);
-+			break;
-+		case STATUS_WRITE:
-+			pr_debug("w");
-+			ltq_i2c_tx(priv, last);
-+			break;
-+		default:
-+			disable_burst_irq(priv);
-+			pr_warn("Status W %d\n", priv->status);
-+			break;
-+		}
-+	}
-+
-+	i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
-+	return IRQ_HANDLED;
-+}
-+
-+static void ltq_i2c_isr_prot(struct ltq_i2c *priv)
-+{
-+	u32 i_pro = i2c_r32(p_irqss);
-+
-+	pr_debug("i2c-p");
-+
-+	/* not acknowledge */
-+	if (i_pro & I2C_P_IRQSS_NACK) {
-+		priv->msg_err |= LTQ_I2C_NACK;
-+		pr_debug(" nack");
-+	}
-+
-+	/* arbitration lost */
-+	if (i_pro & I2C_P_IRQSS_AL) {
-+		priv->msg_err |= LTQ_I2C_ARB_LOST;
-+		pr_debug(" arb-lost");
-+	}
-+	/* tx -> rx switch */
-+	if (i_pro & I2C_P_IRQSS_RX)
-+		pr_debug(" rx");
-+
-+	/* tx end */
-+	if (i_pro & I2C_P_IRQSS_TX_END)
-+		pr_debug(" txend");
-+	pr_debug("\n");
-+
-+	if (!priv->msg_err) {
-+		/* tx -> rx switch */
-+		if (i_pro & I2C_P_IRQSS_RX) {
-+			priv->status = STATUS_READ;
-+			enable_burst_irq(priv);
-+		}
-+		if (i_pro & I2C_P_IRQSS_TX_END) {
-+			if (priv->status == STATUS_READ)
-+				priv->status = STATUS_READ_END;
-+			else {
-+				disable_burst_irq(priv);
-+				priv->status = STATUS_STOP;
-+			}
-+		}
-+	}
-+
-+	i2c_w32(i_pro, p_irqsc);
-+}
-+
-+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id)
-+{
-+	u32 i_raw, i_err = 0;
-+	struct ltq_i2c *priv = dev_id;
-+
-+	i_raw = i2c_r32(mis);
-+	pr_debug("i_raw 0x%08X\n", i_raw);
-+
-+	/* error interrupt */
-+	if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
-+		i_err = i2c_r32(err_irqss);
-+		pr_debug("i_err 0x%08X bus_stat 0x%04X\n",
-+			i_err, i2c_r32(bus_stat));
-+
-+		/* tx fifo overflow (8) */
-+		if (i_err & I2C_ERR_IRQSS_TXF_OFL)
-+			priv->msg_err |= LTQ_I2C_TX_OFL;
-+
-+		/* tx fifo underflow (4) */
-+		if (i_err & I2C_ERR_IRQSS_TXF_UFL)
-+			priv->msg_err |= LTQ_I2C_TX_UFL;
-+
-+		/* rx fifo overflow (2) */
-+		if (i_err & I2C_ERR_IRQSS_RXF_OFL)
-+			priv->msg_err |= LTQ_I2C_RX_OFL;
-+
-+		/* rx fifo underflow (1) */
-+		if (i_err & I2C_ERR_IRQSS_RXF_UFL)
-+			priv->msg_err |= LTQ_I2C_RX_UFL;
-+
-+		i2c_w32(i_err, err_irqsc);
-+	}
-+
-+	/* protocol interrupt */
-+	if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
-+		ltq_i2c_isr_prot(priv);
-+
-+	if ((priv->msg_err) || (priv->status == STATUS_STOP))
-+		complete(&priv->cmd_complete);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static u32 ltq_i2c_functionality(struct i2c_adapter *adap)
-+{
-+	return	I2C_FUNC_I2C |
-+		I2C_FUNC_10BIT_ADDR |
-+		I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static struct i2c_algorithm ltq_i2c_algorithm = {
-+	.master_xfer	= ltq_i2c_xfer,
-+	.functionality	= ltq_i2c_functionality,
-+};
-+
-+static int __devinit ltq_i2c_probe(struct platform_device *pdev)
-+{
-+	struct device_node *node = pdev->dev.of_node;
-+	struct ltq_i2c *priv;
-+	struct i2c_adapter *adap;
-+	struct resource *mmres, irqres[4];
-+	int ret = 0;
-+
-+	dev_dbg(&pdev->dev, "probing\n");
-+
-+	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	ret = of_irq_to_resource_table(node, irqres, 4);
-+	if (!mmres || (ret != 4)) {
-+		dev_err(&pdev->dev, "no resources\n");
-+		return -ENODEV;
-+	}
-+
-+	/* allocate private data */
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv) {
-+		dev_err(&pdev->dev, "can't allocate private data\n");
-+		return -ENOMEM;
-+	}
-+
-+	adap = &priv->adap;
-+	i2c_set_adapdata(adap, priv);
-+	adap->owner = THIS_MODULE;
-+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+	strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
-+	adap->algo = &ltq_i2c_algorithm;
-+
-+	if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) {
-+		dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n");
-+		priv->i2c_clock = 100000;
-+	}
-+
-+	init_completion(&priv->cmd_complete);
-+	mutex_init(&priv->mutex);
-+
-+	priv->membase = devm_request_and_ioremap(&pdev->dev, mmres);
-+	if (priv->membase == NULL)
-+		return -ENOMEM;
-+
-+	priv->dev = &pdev->dev;
-+	priv->irq_lb = irqres[0].start;
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst,
-+		IRQF_DISABLED, "i2c lb", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
-+			irqres[0].start);
-+		return -ENODEV;
-+	}
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst,
-+		IRQF_DISABLED, "i2c b", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get burst IRQ %d\n",
-+			irqres[1].start);
-+		return -ENODEV;
-+	}
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr,
-+		IRQF_DISABLED, "i2c err", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get error IRQ %d\n",
-+			irqres[2].start);
-+		return -ENODEV;
-+	}
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr,
-+		IRQF_DISABLED, "i2c p", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
-+			irqres[3].start);
-+		return -ENODEV;
-+	}
-+
-+	dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
-+	dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start,
-+		irqres[1].start, irqres[2].start, irqres[3].start);
-+
-+	priv->clk_gate = devm_clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(priv->clk_gate)) {
-+		dev_err(&pdev->dev, "failed to get i2c clk\n");
-+		return -ENOENT;
-+	}
-+
-+	/* this is a static clock, which has no refcounting */
-+	priv->clk_input = clk_get_fpi();
-+	if (IS_ERR(priv->clk_input)) {
-+		dev_err(&pdev->dev, "failed to get fpi clk\n");
-+		return -ENOENT;
-+	}
-+
-+	clk_activate(priv->clk_gate);
-+
-+	/* add our adapter to the i2c stack */
-+	ret = i2c_add_numbered_adapter(adap);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't register I2C adapter\n");
-+		goto out;
-+	}
-+
-+	platform_set_drvdata(pdev, priv);
-+	i2c_set_adapdata(adap, priv);
-+
-+	/* print module version information */
-+	dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
-+		(i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
-+		(i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
-+
-+	/* initialize HW */
-+	ret = ltq_i2c_hw_init(adap);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't configure adapter\n");
-+		i2c_del_adapter(adap);
-+		platform_set_drvdata(pdev, NULL);
-+	} else {
-+		dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
-+	}
-+
-+	of_i2c_register_devices(adap);
-+
-+out:
-+	/* if init failed, we need to deactivate the clock gate */
-+	if (ret)
-+		clk_deactivate(priv->clk_gate);
-+
-+	return ret;
-+}
-+
-+static int __devexit ltq_i2c_remove(struct platform_device *pdev)
-+{
-+	struct ltq_i2c *priv = platform_get_drvdata(pdev);
-+
-+	/* disable bus */
-+	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+	/* power down the core */
-+	clk_deactivate(priv->clk_gate);
-+
-+	/* remove driver */
-+	i2c_del_adapter(&priv->adap);
-+	kfree(priv);
-+
-+	dev_dbg(&pdev->dev, "removed\n");
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+static const struct of_device_id ltq_i2c_match[] = {
-+	{ .compatible = "lantiq,lantiq-i2c" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_i2c_match);
-+
-+static struct platform_driver ltq_i2c_driver = {
-+	.probe	= ltq_i2c_probe,
-+	.remove	= __devexit_p(ltq_i2c_remove),
-+	.driver	= {
-+		.name	= DRV_NAME,
-+		.owner	= THIS_MODULE,
-+		.of_match_table = ltq_i2c_match,
-+	},
-+};
-+
-+module_platform_driver(ltq_i2c_driver);
-+
-+MODULE_DESCRIPTION("Lantiq I2C bus adapter");
-+MODULE_AUTHOR("Thomas Langer <thomas.langer@lantiq.com>");
-+MODULE_ALIAS("platform:" DRV_NAME);
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-lantiq.h
-@@ -0,0 +1,234 @@
-+#ifndef I2C_LANTIQ_H
-+#define I2C_LANTIQ_H
-+
-+/* I2C register structure */
-+struct lantiq_reg_i2c {
-+	/* I2C Kernel Clock Control Register */
-+	unsigned int clc; /* 0x00000000 */
-+	/* Reserved */
-+	unsigned int res_0; /* 0x00000004 */
-+	/* I2C Identification Register */
-+	unsigned int id; /* 0x00000008 */
-+	/* Reserved */
-+	unsigned int res_1; /* 0x0000000C */
-+	/*
-+	 * I2C RUN Control Register
-+	 * This register enables and disables the I2C peripheral. Before
-+	 * enabling, the I2C has to be configured properly. After enabling
-+	 * no configuration is possible
-+	 */
-+	unsigned int run_ctrl; /* 0x00000010 */
-+	/*
-+	 * I2C End Data Control Register
-+	 * This register is used to either turn around the data transmission
-+	 * direction or to address another slave without sending a stop
-+	 * condition. Also the software can stop the slave-transmitter by
-+	 * sending a not-accolade when working as master-receiver or even
-+	 * stop data transmission immediately when operating as
-+	 * master-transmitter. The writing to the bits of this control
-+	 * register is only effective when in MASTER RECEIVES BYTES, MASTER
-+	 * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
-+	 */
-+	unsigned int endd_ctrl; /* 0x00000014 */
-+	/*
-+	 * I2C Fractional Divider Configuration Register
-+	 * These register is used to program the fractional divider of the I2C
-+	 * bus. Before the peripheral is switched on by setting the RUN-bit the
-+	 * two (fixed) values for the two operating frequencies are programmed
-+	 * into these (configuration) registers. The Register FDIV_HIGH_CFG has
-+	 * the same layout as I2C_FDIV_CFG.
-+	 */
-+	unsigned int fdiv_cfg; /* 0x00000018 */
-+	/*
-+	 * I2C Fractional Divider (highspeed mode) Configuration Register
-+	 * These register is used to program the fractional divider of the I2C
-+	 * bus. Before the peripheral is switched on by setting the RUN-bit the
-+	 * two (fixed) values for the two operating frequencies are programmed
-+	 * into these (configuration) registers. The Register FDIV_CFG has the
-+	 * same layout as I2C_FDIV_CFG.
-+	 */
-+	unsigned int fdiv_high_cfg; /* 0x0000001C */
-+	/* I2C Address Configuration Register */
-+	unsigned int addr_cfg; /* 0x00000020 */
-+	/* I2C Bus Status Register
-+	 * This register gives a status information of the I2C. This additional
-+	 * information can be used by the software to start proper actions.
-+	 */
-+	unsigned int bus_stat; /* 0x00000024 */
-+	/* I2C FIFO Configuration Register */
-+	unsigned int fifo_cfg; /* 0x00000028 */
-+	/* I2C Maximum Received Packet Size Register */
-+	unsigned int mrps_ctrl; /* 0x0000002C */
-+	/* I2C Received Packet Size Status Register */
-+	unsigned int rps_stat; /* 0x00000030 */
-+	/* I2C Transmit Packet Size Register */
-+	unsigned int tps_ctrl; /* 0x00000034 */
-+	/* I2C Filled FIFO Stages Status Register */
-+	unsigned int ffs_stat; /* 0x00000038 */
-+	/* Reserved */
-+	unsigned int res_2; /* 0x0000003C */
-+	/* I2C Timing Configuration Register */
-+	unsigned int tim_cfg; /* 0x00000040 */
-+	/* Reserved */
-+	unsigned int res_3[7]; /* 0x00000044 */
-+	/* I2C Error Interrupt Request Source Mask Register */
-+	unsigned int err_irqsm; /* 0x00000060 */
-+	/* I2C Error Interrupt Request Source Status Register */
-+	unsigned int err_irqss; /* 0x00000064 */
-+	/* I2C Error Interrupt Request Source Clear Register */
-+	unsigned int err_irqsc; /* 0x00000068 */
-+	/* Reserved */
-+	unsigned int res_4; /* 0x0000006C */
-+	/* I2C Protocol Interrupt Request Source Mask Register */
-+	unsigned int p_irqsm; /* 0x00000070 */
-+	/* I2C Protocol Interrupt Request Source Status Register */
-+	unsigned int p_irqss; /* 0x00000074 */
-+	/* I2C Protocol Interrupt Request Source Clear Register */
-+	unsigned int p_irqsc; /* 0x00000078 */
-+	/* Reserved */
-+	unsigned int res_5; /* 0x0000007C */
-+	/* I2C Raw Interrupt Status Register */
-+	unsigned int ris; /* 0x00000080 */
-+	/* I2C Interrupt Mask Control Register */
-+	unsigned int imsc; /* 0x00000084 */
-+	/* I2C Masked Interrupt Status Register */
-+	unsigned int mis; /* 0x00000088 */
-+	/* I2C Interrupt Clear Register */
-+	unsigned int icr; /* 0x0000008C */
-+	/* I2C Interrupt Set Register */
-+	unsigned int isr; /* 0x00000090 */
-+	/* I2C DMA Enable Register */
-+	unsigned int dmae; /* 0x00000094 */
-+	/* Reserved */
-+	unsigned int res_6[8154]; /* 0x00000098 */
-+	/* I2C Transmit Data Register */
-+	unsigned int txd; /* 0x00008000 */
-+	/* Reserved */
-+	unsigned int res_7[4095]; /* 0x00008004 */
-+	/* I2C Receive Data Register */
-+	unsigned int rxd; /* 0x0000C000 */
-+	/* Reserved */
-+	unsigned int res_8[4095]; /* 0x0000C004 */
-+};
-+
-+/*
-+ * Clock Divider for Normal Run Mode
-+ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long
-+ * as the new divider value RMC is not valid, the register returns 0x0000 00xx
-+ * on reading.
-+ */
-+#define I2C_CLC_RMC_MASK 0x0000FF00
-+/* field offset */
-+#define I2C_CLC_RMC_OFFSET 8
-+
-+/* Fields of "I2C Identification Register" */
-+/* Module ID */
-+#define I2C_ID_ID_MASK 0x0000FF00
-+/* field offset */
-+#define I2C_ID_ID_OFFSET 8
-+/* Revision */
-+#define I2C_ID_REV_MASK 0x000000FF
-+/* field offset */
-+#define I2C_ID_REV_OFFSET 0
-+
-+/* Fields of "I2C Interrupt Mask Control Register" */
-+/* Enable */
-+#define I2C_IMSC_BREQ_INT_EN 0x00000008
-+/* Enable */
-+#define I2C_IMSC_LBREQ_INT_EN 0x00000004
-+
-+/* Fields of "I2C Fractional Divider Configuration Register" */
-+/* field offset */
-+#define I2C_FDIV_CFG_INC_OFFSET 16
-+
-+/* Fields of "I2C Interrupt Mask Control Register" */
-+/* Enable */
-+#define I2C_IMSC_I2C_P_INT_EN 0x00000020
-+/* Enable */
-+#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
-+
-+/* Fields of "I2C Error Interrupt Request Source Status Register" */
-+/* TXF_OFL */
-+#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
-+/* TXF_UFL */
-+#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
-+/* RXF_OFL */
-+#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
-+/* RXF_UFL */
-+#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
-+
-+/* Fields of "I2C Raw Interrupt Status Register" */
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
-+
-+/* Fields of "I2C FIFO Configuration Register" */
-+/* TX FIFO Flow Control */
-+#define I2C_FIFO_CFG_TXFC 0x00020000
-+/* RX FIFO Flow Control */
-+#define I2C_FIFO_CFG_RXFC 0x00010000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
-+/* 1 word */
-+#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
-+
-+/* Fields of "I2C FIFO Configuration Register" */
-+/* 1 word */
-+#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
-+/* Stop on Packet End Enable */
-+#define I2C_ADDR_CFG_SOPE_EN 0x00200000
-+/* Stop on Not Acknowledge Enable */
-+#define I2C_ADDR_CFG_SONA_EN 0x00100000
-+/* Enable */
-+#define I2C_ADDR_CFG_MnS_EN 0x00080000
-+
-+/* Fields of "I2C Interrupt Clear Register" */
-+/* Clear */
-+#define I2C_ICR_BREQ_INT_CLR 0x00000008
-+/* Clear */
-+#define I2C_ICR_LBREQ_INT_CLR 0x00000004
-+
-+/* Fields of "I2C Fractional Divider Configuration Register" */
-+/* field offset */
-+#define I2C_FDIV_CFG_DEC_OFFSET 0
-+
-+/* Fields of "I2C Bus Status Register" */
-+/* Bus Status */
-+#define I2C_BUS_STAT_BS_MASK 0x00000003
-+/* Read from I2C Bus. */
-+#define I2C_BUS_STAT_RNW_READ 0x00000004
-+/* I2C Bus is free. */
-+#define I2C_BUS_STAT_BS_FREE 0x00000000
-+/*
-+ * The device is working as master and has claimed the control on the
-+ * I2C-bus (busy master).
-+ */
-+#define I2C_BUS_STAT_BS_BM 0x00000002
-+
-+/* Fields of "I2C RUN Control Register" */
-+/* Enable */
-+#define I2C_RUN_CTRL_RUN_EN 0x00000001
-+
-+/* Fields of "I2C End Data Control Register" */
-+/*
-+ * Set End of Transmission
-+ * Note:Do not write '1' to this bit when bus is free. This will cause an
-+ * abort after the first byte when a new transfer is started.
-+ */
-+#define I2C_ENDD_CTRL_SETEND 0x00000002
-+
-+/* Fields of "I2C Protocol Interrupt Request Source Status Register" */
-+/* NACK */
-+#define I2C_P_IRQSS_NACK 0x00000010
-+/* AL */
-+#define I2C_P_IRQSS_AL 0x00000008
-+/* RX */
-+#define I2C_P_IRQSS_RX 0x00000040
-+/* TX_END */
-+#define I2C_P_IRQSS_TX_END 0x00000020
-+
-+
-+#endif /* I2C_LANTIQ_H */
diff --git a/target/linux/lantiq/patches-3.18/0032-USB-fix-roothub-for-IFXHCD.patch b/target/linux/lantiq/patches-3.18/0032-USB-fix-roothub-for-IFXHCD.patch
deleted file mode 100644
index cf2c5cbd5b..0000000000
--- a/target/linux/lantiq/patches-3.18/0032-USB-fix-roothub-for-IFXHCD.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 326714a47233e4a524afa0c8398276fddf0dbd4d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 6 Dec 2012 19:59:53 +0100
-Subject: [PATCH 32/36] USB: fix roothub for IFXHCD
-
----
- arch/mips/lantiq/Kconfig |    1 +
- drivers/usb/core/hub.c   |    2 +-
- 2 files changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -3,6 +3,7 @@ if LANTIQ
- config SOC_TYPE_XWAY
- 	bool
- 	select PINCTRL_XWAY
-+	select USB_ARCH_HAS_HCD
- 	default n
- 
- choice
---- a/drivers/usb/core/hub.c
-+++ b/drivers/usb/core/hub.c
-@@ -4303,7 +4303,7 @@ hub_port_init (struct usb_hub *hub, stru
- 		udev->ttport = hdev->ttport;
- 	} else if (udev->speed != USB_SPEED_HIGH
- 			&& hdev->speed == USB_SPEED_HIGH) {
--		if (!hub->tt.hub) {
-+		if (hdev->parent && !hub->tt.hub) {
- 			dev_err(&udev->dev, "parent hub has no TT\n");
- 			retval = -EINVAL;
- 			goto fail;
diff --git a/target/linux/lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
deleted file mode 100644
index 81e5d39f21..0000000000
--- a/target/linux/lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
+++ /dev/null
@@ -1,1022 +0,0 @@
-From e75df4f96373e5d16f8ca13aa031e54cdcfeda62 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 09:29:37 +0100
-Subject: [PATCH 33/36] SPI: MIPS: lantiq: adds spi-xway
-
-This patch adds support for the SPI core found on several Lantiq SoCs.
-The Driver has been runtime tested in combination with m25p80 Flash Devices
-on Amazon_SE and VR9.
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/Kconfig    |    8 +
- drivers/spi/Makefile   |    1 +
- drivers/spi/spi-xway.c |  977 ++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 986 insertions(+)
- create mode 100644 drivers/spi/spi-xway.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -597,6 +597,14 @@ config SPI_NUC900
- 	help
- 	  SPI driver for Nuvoton NUC900 series ARM SoCs
- 
-+config SPI_XWAY
-+	tristate "Lantiq XWAY SPI controller"
-+	depends on LANTIQ && SOC_TYPE_XWAY
-+	select SPI_BITBANG
-+	help
-+	  This driver supports the Lantiq SoC SPI controller in master
-+	  mode.
-+
- #
- # Add new SPI master controllers in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -86,3 +86,4 @@ obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
- obj-$(CONFIG_SPI_XCOMM)		+= spi-xcomm.o
- obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
- obj-$(CONFIG_SPI_XTENSA_XTFPGA)		+= spi-xtensa-xtfpga.o
-+obj-$(CONFIG_SPI_XWAY)			+= spi-xway.o
---- /dev/null
-+++ b/drivers/spi/spi-xway.c
-@@ -0,0 +1,977 @@
-+/*
-+ * Lantiq SoC SPI controller
-+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/workqueue.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/completion.h>
-+#include <linux/spinlock.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+#include <linux/of_irq.h>
-+
-+#include <lantiq_soc.h>
-+
-+#define LTQ_SPI_CLC		0x00	/* Clock control */
-+#define LTQ_SPI_PISEL		0x04	/* Port input select */
-+#define LTQ_SPI_ID		0x08	/* Identification */
-+#define LTQ_SPI_CON		0x10	/* Control */
-+#define LTQ_SPI_STAT		0x14	/* Status */
-+#define LTQ_SPI_WHBSTATE	0x18	/* Write HW modified state */
-+#define LTQ_SPI_TB		0x20	/* Transmit buffer */
-+#define LTQ_SPI_RB		0x24	/* Receive buffer */
-+#define LTQ_SPI_RXFCON		0x30	/* Receive FIFO control */
-+#define LTQ_SPI_TXFCON		0x34	/* Transmit FIFO control */
-+#define LTQ_SPI_FSTAT		0x38	/* FIFO status */
-+#define LTQ_SPI_BRT		0x40	/* Baudrate timer */
-+#define LTQ_SPI_BRSTAT		0x44	/* Baudrate timer status */
-+#define LTQ_SPI_SFCON		0x60	/* Serial frame control */
-+#define LTQ_SPI_SFSTAT		0x64	/* Serial frame status */
-+#define LTQ_SPI_GPOCON		0x70	/* General purpose output control */
-+#define LTQ_SPI_GPOSTAT		0x74	/* General purpose output status */
-+#define LTQ_SPI_FGPO		0x78	/* Forced general purpose output */
-+#define LTQ_SPI_RXREQ		0x80	/* Receive request */
-+#define LTQ_SPI_RXCNT		0x84	/* Receive count */
-+#define LTQ_SPI_DMACON		0xEC	/* DMA control */
-+#define LTQ_SPI_IRNEN		0xF4	/* Interrupt node enable */
-+#define LTQ_SPI_IRNICR		0xF8	/* Interrupt node interrupt capture */
-+#define LTQ_SPI_IRNCR		0xFC	/* Interrupt node control */
-+
-+#define LTQ_SPI_CLC_SMC_SHIFT	16	/* Clock divider for sleep mode */
-+#define LTQ_SPI_CLC_SMC_MASK	0xFF
-+#define LTQ_SPI_CLC_RMC_SHIFT	8	/* Clock divider for normal run mode */
-+#define LTQ_SPI_CLC_RMC_MASK	0xFF
-+#define LTQ_SPI_CLC_DISS	BIT(1)	/* Disable status bit */
-+#define LTQ_SPI_CLC_DISR	BIT(0)	/* Disable request bit */
-+
-+#define LTQ_SPI_ID_TXFS_SHIFT	24	/* Implemented TX FIFO size */
-+#define LTQ_SPI_ID_TXFS_MASK	0x3F
-+#define LTQ_SPI_ID_RXFS_SHIFT	16	/* Implemented RX FIFO size */
-+#define LTQ_SPI_ID_RXFS_MASK	0x3F
-+#define LTQ_SPI_ID_REV_MASK	0x1F	/* Hardware revision number */
-+#define LTQ_SPI_ID_CFG		BIT(5)	/* DMA interface support */
-+
-+#define LTQ_SPI_CON_BM_SHIFT	16	/* Data width selection */
-+#define LTQ_SPI_CON_BM_MASK	0x1F
-+#define LTQ_SPI_CON_EM		BIT(24)	/* Echo mode */
-+#define LTQ_SPI_CON_IDLE	BIT(23)	/* Idle bit value */
-+#define LTQ_SPI_CON_ENBV	BIT(22)	/* Enable byte valid control */
-+#define LTQ_SPI_CON_RUEN	BIT(12)	/* Receive underflow error enable */
-+#define LTQ_SPI_CON_TUEN	BIT(11)	/* Transmit underflow error enable */
-+#define LTQ_SPI_CON_AEN		BIT(10)	/* Abort error enable */
-+#define LTQ_SPI_CON_REN		BIT(9)	/* Receive overflow error enable */
-+#define LTQ_SPI_CON_TEN		BIT(8)	/* Transmit overflow error enable */
-+#define LTQ_SPI_CON_LB		BIT(7)	/* Loopback control */
-+#define LTQ_SPI_CON_PO		BIT(6)	/* Clock polarity control */
-+#define LTQ_SPI_CON_PH		BIT(5)	/* Clock phase control */
-+#define LTQ_SPI_CON_HB		BIT(4)	/* Heading control */
-+#define LTQ_SPI_CON_RXOFF	BIT(1)	/* Switch receiver off */
-+#define LTQ_SPI_CON_TXOFF	BIT(0)	/* Switch transmitter off */
-+
-+#define LTQ_SPI_STAT_RXBV_MASK	0x7
-+#define LTQ_SPI_STAT_RXBV_SHIFT	28
-+#define LTQ_SPI_STAT_BSY	BIT(13)	/* Busy flag */
-+#define LTQ_SPI_STAT_RUE	BIT(12)	/* Receive underflow error flag */
-+#define LTQ_SPI_STAT_TUE	BIT(11)	/* Transmit underflow error flag */
-+#define LTQ_SPI_STAT_AE		BIT(10)	/* Abort error flag */
-+#define LTQ_SPI_STAT_RE		BIT(9)	/* Receive error flag */
-+#define LTQ_SPI_STAT_TE		BIT(8)	/* Transmit error flag */
-+#define LTQ_SPI_STAT_MS		BIT(1)	/* Master/slave select bit */
-+#define LTQ_SPI_STAT_EN		BIT(0)	/* Enable bit */
-+
-+#define LTQ_SPI_WHBSTATE_SETTUE	BIT(15)	/* Set transmit underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETAE	BIT(14)	/* Set abort error flag */
-+#define LTQ_SPI_WHBSTATE_SETRE	BIT(13)	/* Set receive error flag */
-+#define LTQ_SPI_WHBSTATE_SETTE	BIT(12)	/* Set transmit error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTUE	BIT(11)	/* Clear transmit underflow error
-+						flag */
-+#define LTQ_SPI_WHBSTATE_CLRAE	BIT(10)	/* Clear abort error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRE	BIT(9)	/* Clear receive error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTE	BIT(8)	/* Clear transmit error flag */
-+#define LTQ_SPI_WHBSTATE_SETME	BIT(7)	/* Set mode error flag */
-+#define LTQ_SPI_WHBSTATE_CLRME	BIT(6)	/* Clear mode error flag */
-+#define LTQ_SPI_WHBSTATE_SETRUE	BIT(5)	/* Set receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRUE	BIT(4)	/* Clear receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETMS	BIT(3)	/* Set master select bit */
-+#define LTQ_SPI_WHBSTATE_CLRMS	BIT(2)	/* Clear master select bit */
-+#define LTQ_SPI_WHBSTATE_SETEN	BIT(1)	/* Set enable bit (operational mode) */
-+#define LTQ_SPI_WHBSTATE_CLREN	BIT(0)	/* Clear enable bit (config mode */
-+#define LTQ_SPI_WHBSTATE_CLR_ERRORS	0x0F50
-+
-+#define LTQ_SPI_RXFCON_RXFITL_SHIFT	8 /* FIFO interrupt trigger level */
-+#define LTQ_SPI_RXFCON_RXFITL_MASK	0x3F
-+#define LTQ_SPI_RXFCON_RXFLU		BIT(1)	/* FIFO flush */
-+#define LTQ_SPI_RXFCON_RXFEN		BIT(0)	/* FIFO enable */
-+
-+#define LTQ_SPI_TXFCON_TXFITL_SHIFT	8 /* FIFO interrupt trigger level */
-+#define LTQ_SPI_TXFCON_TXFITL_MASK	0x3F
-+#define LTQ_SPI_TXFCON_TXFLU		BIT(1)	/* FIFO flush */
-+#define LTQ_SPI_TXFCON_TXFEN		BIT(0)	/* FIFO enable */
-+
-+#define LTQ_SPI_FSTAT_RXFFL_MASK	0x3f
-+#define LTQ_SPI_FSTAT_RXFFL_SHIFT	0
-+#define LTQ_SPI_FSTAT_TXFFL_MASK	0x3f
-+#define LTQ_SPI_FSTAT_TXFFL_SHIFT	8
-+
-+#define LTQ_SPI_GPOCON_ISCSBN_SHIFT	8
-+#define LTQ_SPI_GPOCON_INVOUTN_SHIFT	0
-+
-+#define LTQ_SPI_FGPO_SETOUTN_SHIFT	8
-+#define LTQ_SPI_FGPO_CLROUTN_SHIFT	0
-+
-+#define LTQ_SPI_RXREQ_RXCNT_MASK	0xFFFF	/* Receive count value */
-+#define LTQ_SPI_RXCNT_TODO_MASK		0xFFFF	/* Recevie to-do value */
-+
-+#define LTQ_SPI_IRNEN_F		BIT(3)	/* Frame end interrupt request */
-+#define LTQ_SPI_IRNEN_E		BIT(2)	/* Error end interrupt request */
-+#define LTQ_SPI_IRNEN_T		BIT(1)	/* Transmit end interrupt request */
-+#define LTQ_SPI_IRNEN_R		BIT(0)	/* Receive end interrupt request */
-+#define LTQ_SPI_IRNEN_ALL	0xF
-+
-+struct ltq_spi {
-+	struct spi_bitbang	bitbang;
-+	struct completion	done;
-+	spinlock_t		lock;
-+
-+	struct device		*dev;
-+	void __iomem		*base;
-+	struct clk		*fpiclk;
-+	struct clk		*spiclk;
-+
-+	int			status;
-+	int			irq[3];
-+
-+	const u8		*tx;
-+	u8			*rx;
-+	u32			tx_cnt;
-+	u32			rx_cnt;
-+	u32			len;
-+	struct spi_transfer	*curr_transfer;
-+
-+	u32 (*get_tx) (struct ltq_spi *);
-+
-+	u16			txfs;
-+	u16			rxfs;
-+	unsigned		dma_support:1;
-+	unsigned		cfg_mode:1;
-+};
-+
-+static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi)
-+{
-+	return spi_master_get_devdata(spi->master);
-+}
-+
-+static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg)
-+{
-+	return ioread32be(hw->base + reg);
-+}
-+
-+static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg)
-+{
-+	iowrite32be(val, hw->base + reg);
-+}
-+
-+static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg)
-+{
-+	u32 val;
-+
-+	val = ltq_spi_reg_read(hw, reg);
-+	val |= bits;
-+	ltq_spi_reg_write(hw, val, reg);
-+}
-+
-+static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg)
-+{
-+	u32 val;
-+
-+	val = ltq_spi_reg_read(hw, reg);
-+	val &= ~bits;
-+	ltq_spi_reg_write(hw, val, reg);
-+}
-+
-+static void ltq_spi_hw_enable(struct ltq_spi *hw)
-+{
-+	u32 clc;
-+
-+	/* Power-up module */
-+	clk_enable(hw->spiclk);
-+
-+	/*
-+	 * Set clock divider for run mode to 1 to
-+	 * run at same frequency as FPI bus
-+	 */
-+	clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
-+	ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC);
-+}
-+
-+static void ltq_spi_hw_disable(struct ltq_spi *hw)
-+{
-+	/* Set clock divider to 0 and set module disable bit */
-+	ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
-+
-+	/* Power-down module */
-+	clk_disable(hw->spiclk);
-+}
-+
-+static void ltq_spi_reset_fifos(struct ltq_spi *hw)
-+{
-+	u32 val;
-+
-+	/*
-+	 * Enable and flush FIFOs. Set interrupt trigger level to
-+	 * half of FIFO count implemented in hardware.
-+	 */
-+	if (hw->txfs > 1) {
-+		val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1);
-+		val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
-+		ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON);
-+	}
-+
-+	if (hw->rxfs > 1) {
-+		val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1);
-+		val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
-+		ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON);
-+	}
-+}
-+
-+static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
-+{
-+	u32 stat;
-+	unsigned long timeout;
-+
-+	timeout = jiffies + msecs_to_jiffies(200);
-+
-+	do {
-+		stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT);
-+		if (!(stat & LTQ_SPI_STAT_BSY))
-+			return 0;
-+
-+		cond_resched();
-+	} while (!time_after_eq(jiffies, timeout));
-+
-+	dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat);
-+
-+	return -ETIMEDOUT;
-+}
-+
-+static void ltq_spi_config_mode_set(struct ltq_spi *hw)
-+{
-+	if (hw->cfg_mode)
-+		return;
-+
-+	/*
-+	 * Putting the SPI module in config mode is only safe if no
-+	 * transfer is in progress as indicated by busy flag STATE.BSY.
-+	 */
-+	if (ltq_spi_wait_ready(hw)) {
-+		ltq_spi_reset_fifos(hw);
-+		hw->status = -ETIMEDOUT;
-+	}
-+	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
-+
-+	hw->cfg_mode = 1;
-+}
-+
-+static void ltq_spi_run_mode_set(struct ltq_spi *hw)
-+{
-+	if (!hw->cfg_mode)
-+		return;
-+
-+	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
-+
-+	hw->cfg_mode = 0;
-+}
-+
-+static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw)
-+{
-+	const u8 *tx = hw->tx;
-+	u32 data = *tx++;
-+
-+	hw->tx_cnt++;
-+	hw->tx++;
-+
-+	return data;
-+}
-+
-+static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw)
-+{
-+	const u16 *tx = (u16 *) hw->tx;
-+	u32 data = *tx++;
-+
-+	hw->tx_cnt += 2;
-+	hw->tx += 2;
-+
-+	return data;
-+}
-+
-+static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw)
-+{
-+	const u32 *tx = (u32 *) hw->tx;
-+	u32 data = *tx++;
-+
-+	hw->tx_cnt += 4;
-+	hw->tx += 4;
-+
-+	return data;
-+}
-+
-+static void ltq_spi_bits_per_word_set(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 bm;
-+	u8 bits_per_word = spi->bits_per_word;
-+
-+	/*
-+	 * Use either default value of SPI device or value
-+	 * from current transfer.
-+	 */
-+	if (hw->curr_transfer && hw->curr_transfer->bits_per_word)
-+		bits_per_word = hw->curr_transfer->bits_per_word;
-+
-+	if (bits_per_word <= 8)
-+		hw->get_tx = ltq_spi_tx_word_u8;
-+	else if (bits_per_word <= 16)
-+		hw->get_tx = ltq_spi_tx_word_u16;
-+	else if (bits_per_word <= 32)
-+		hw->get_tx = ltq_spi_tx_word_u32;
-+
-+	/* CON.BM value = bits_per_word - 1 */
-+	bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
-+
-+	ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK <<
-+			     LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON);
-+	ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_speed_set(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 br, max_speed_hz, spi_clk;
-+	u32 speed_hz = spi->max_speed_hz;
-+
-+	/*
-+	 * Use either default value of SPI device or value
-+	 * from current transfer.
-+	 */
-+	if (hw->curr_transfer && hw->curr_transfer->speed_hz)
-+		speed_hz = hw->curr_transfer->speed_hz;
-+
-+	/*
-+	 * SPI module clock is derived from FPI bus clock dependent on
-+	 * divider value in CLC.RMS which is always set to 1.
-+	 */
-+	spi_clk = clk_get_rate(hw->fpiclk);
-+
-+	/*
-+	 * Maximum SPI clock frequency in master mode is half of
-+	 * SPI module clock frequency. Maximum reload value of
-+	 * baudrate generator BR is 2^16.
-+	 */
-+	max_speed_hz = spi_clk / 2;
-+	if (speed_hz >= max_speed_hz)
-+		br = 0;
-+	else
-+		br = (max_speed_hz / speed_hz) - 1;
-+
-+	if (br > 0xFFFF)
-+		br = 0xFFFF;
-+
-+	ltq_spi_reg_write(hw, br, LTQ_SPI_BRT);
-+}
-+
-+static void ltq_spi_clockmode_set(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 con;
-+
-+	con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
-+
-+	/*
-+	 * SPI mode mapping in CON register:
-+	 * Mode CPOL CPHA CON.PO CON.PH
-+	 *  0    0    0      0      1
-+	 *  1    0    1      0      0
-+	 *  2    1    0      1      1
-+	 *  3    1    1      1      0
-+	 */
-+	if (spi->mode & SPI_CPHA)
-+		con &= ~LTQ_SPI_CON_PH;
-+	else
-+		con |= LTQ_SPI_CON_PH;
-+
-+	if (spi->mode & SPI_CPOL)
-+		con |= LTQ_SPI_CON_PO;
-+	else
-+		con &= ~LTQ_SPI_CON_PO;
-+
-+	/* Set heading control */
-+	if (spi->mode & SPI_LSB_FIRST)
-+		con &= ~LTQ_SPI_CON_HB;
-+	else
-+		con |= LTQ_SPI_CON_HB;
-+
-+	ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t)
-+{
-+	u32 con;
-+
-+	con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
-+
-+	if (t) {
-+		if (t->tx_buf && t->rx_buf) {
-+			con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
-+		} else if (t->rx_buf) {
-+			con &= ~LTQ_SPI_CON_RXOFF;
-+			con |= LTQ_SPI_CON_TXOFF;
-+		} else if (t->tx_buf) {
-+			con &= ~LTQ_SPI_CON_TXOFF;
-+			con |= LTQ_SPI_CON_RXOFF;
-+		}
-+	} else
-+		con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
-+
-+	ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_internal_cs_activate(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 fgpo;
-+
-+	fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT));
-+	ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+}
-+
-+static void ltq_spi_internal_cs_deactivate(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 fgpo;
-+
-+	fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
-+	ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+}
-+
-+static void ltq_spi_chipselect(struct spi_device *spi, int cs)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+
-+	switch (cs) {
-+	case BITBANG_CS_ACTIVE:
-+		ltq_spi_bits_per_word_set(spi);
-+		ltq_spi_speed_set(spi);
-+		ltq_spi_clockmode_set(spi);
-+		ltq_spi_run_mode_set(hw);
-+		ltq_spi_internal_cs_activate(spi);
-+		break;
-+
-+	case BITBANG_CS_INACTIVE:
-+		ltq_spi_internal_cs_deactivate(spi);
-+		ltq_spi_config_mode_set(hw);
-+		break;
-+	}
-+}
-+
-+static int ltq_spi_setup_transfer(struct spi_device *spi,
-+				  struct spi_transfer *t)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u8 bits_per_word = spi->bits_per_word;
-+
-+	hw->curr_transfer = t;
-+
-+	if (t && t->bits_per_word)
-+		bits_per_word = t->bits_per_word;
-+
-+	if (bits_per_word > 32)
-+		return -EINVAL;
-+
-+	ltq_spi_config_mode_set(hw);
-+
-+	return 0;
-+}
-+
-+static int ltq_spi_setup(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 gpocon, fgpo;
-+
-+	/* Set default word length to 8 if not set */
-+	if (!spi->bits_per_word)
-+		spi->bits_per_word = 8;
-+
-+	if (spi->bits_per_word > 32)
-+		return -EINVAL;
-+
-+	/*
-+	 * Up to six GPIOs can be connected to the SPI module
-+	 * via GPIO alternate function to control the chip select lines.
-+	 */
-+	gpocon = (1 << (spi->chip_select +
-+			LTQ_SPI_GPOCON_ISCSBN_SHIFT));
-+
-+	if (spi->mode & SPI_CS_HIGH)
-+		gpocon |= (1 << spi->chip_select);
-+
-+	fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
-+
-+	ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON);
-+	ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+
-+	return 0;
-+}
-+
-+static void ltq_spi_cleanup(struct spi_device *spi)
-+{
-+
-+}
-+
-+static void ltq_spi_txfifo_write(struct ltq_spi *hw)
-+{
-+	u32 fstat, data;
-+	u16 fifo_space;
-+
-+	/* Determine how much FIFOs are free for TX data */
-+	fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
-+	fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) &
-+					LTQ_SPI_FSTAT_TXFFL_MASK);
-+
-+	if (!fifo_space)
-+		return;
-+
-+	while (hw->tx_cnt < hw->len && fifo_space) {
-+		data = hw->get_tx(hw);
-+		ltq_spi_reg_write(hw, data, LTQ_SPI_TB);
-+		fifo_space--;
-+	}
-+}
-+
-+static void ltq_spi_rxfifo_read(struct ltq_spi *hw)
-+{
-+	u32 fstat, data, *rx32;
-+	u16 fifo_fill;
-+	u8 rxbv, shift, *rx8;
-+
-+	/* Determine how much FIFOs are filled with RX data */
-+	fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
-+	fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT)
-+			& LTQ_SPI_FSTAT_RXFFL_MASK);
-+
-+	if (!fifo_fill)
-+		return;
-+
-+	/*
-+	 * The 32 bit FIFO is always used completely independent from the
-+	 * bits_per_word value. Thus four bytes have to be read at once
-+	 * per FIFO.
-+	 */
-+	rx32 = (u32 *) hw->rx;
-+	while (hw->len - hw->rx_cnt >= 4 && fifo_fill) {
-+		*rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB);
-+		hw->rx_cnt += 4;
-+		hw->rx += 4;
-+		fifo_fill--;
-+	}
-+
-+	/*
-+	 * If there are remaining bytes, read byte count from STAT.RXBV
-+	 * register and read the data byte-wise.
-+	 */
-+	while (fifo_fill && hw->rx_cnt < hw->len) {
-+		rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >>
-+			LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK;
-+		data = ltq_spi_reg_read(hw, LTQ_SPI_RB);
-+
-+		shift = (rxbv - 1) * 8;
-+		rx8 = hw->rx;
-+
-+		while (rxbv) {
-+			*rx8++ = (data >> shift) & 0xFF;
-+			rxbv--;
-+			shift -= 8;
-+			hw->rx_cnt++;
-+			hw->rx++;
-+		}
-+
-+		fifo_fill--;
-+	}
-+}
-+
-+static void ltq_spi_rxreq_set(struct ltq_spi *hw)
-+{
-+	u32 rxreq, rxreq_max, rxtodo;
-+
-+	rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK;
-+
-+	/*
-+	 * In RX-only mode the serial clock is activated only after writing
-+	 * the expected amount of RX bytes into RXREQ register.
-+	 * To avoid receive overflows at high clocks it is better to request
-+	 * only the amount of bytes that fits into all FIFOs. This value
-+	 * depends on the FIFO size implemented in hardware.
-+	 */
-+	rxreq = hw->len - hw->rx_cnt;
-+	rxreq_max = hw->rxfs << 2;
-+	rxreq = min(rxreq_max, rxreq);
-+
-+	if (!rxtodo && rxreq)
-+		ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ);
-+}
-+
-+static inline void ltq_spi_complete(struct ltq_spi *hw)
-+{
-+	complete(&hw->done);
-+}
-+
-+irqreturn_t ltq_spi_tx_irq(int irq, void *data)
-+{
-+	struct ltq_spi *hw = data;
-+	unsigned long flags;
-+	int completed = 0;
-+
-+	spin_lock_irqsave(&hw->lock, flags);
-+
-+	if (hw->tx_cnt < hw->len)
-+		ltq_spi_txfifo_write(hw);
-+
-+	if (hw->tx_cnt == hw->len)
-+		completed = 1;
-+
-+	spin_unlock_irqrestore(&hw->lock, flags);
-+
-+	if (completed)
-+		ltq_spi_complete(hw);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+irqreturn_t ltq_spi_rx_irq(int irq, void *data)
-+{
-+	struct ltq_spi *hw = data;
-+	unsigned long flags;
-+	int completed = 0;
-+
-+	spin_lock_irqsave(&hw->lock, flags);
-+
-+	if (hw->rx_cnt < hw->len) {
-+		ltq_spi_rxfifo_read(hw);
-+
-+		if (hw->tx && hw->tx_cnt < hw->len)
-+			ltq_spi_txfifo_write(hw);
-+	}
-+
-+	if (hw->rx_cnt == hw->len)
-+		completed = 1;
-+	else if (!hw->tx)
-+		ltq_spi_rxreq_set(hw);
-+
-+	spin_unlock_irqrestore(&hw->lock, flags);
-+
-+	if (completed)
-+		ltq_spi_complete(hw);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+irqreturn_t ltq_spi_err_irq(int irq, void *data)
-+{
-+	struct ltq_spi *hw = data;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&hw->lock, flags);
-+
-+	/* Disable all interrupts */
-+	ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
-+
-+	dev_err(hw->dev, "error %x\n", ltq_spi_reg_read(hw, LTQ_SPI_STAT));
-+
-+	/* Clear all error flags */
-+	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-+
-+	/* Flush FIFOs */
-+	ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
-+	ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
-+
-+	hw->status = -EIO;
-+	spin_unlock_irqrestore(&hw->lock, flags);
-+
-+	ltq_spi_complete(hw);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 irq_flags = 0;
-+
-+	hw->tx = t->tx_buf;
-+	hw->rx = t->rx_buf;
-+	hw->len = t->len;
-+	hw->tx_cnt = 0;
-+	hw->rx_cnt = 0;
-+	hw->status = 0;
-+	init_completion(&hw->done);
-+
-+	ltq_spi_xmit_set(hw, t);
-+
-+	/* Enable error interrupts */
-+	ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
-+
-+	if (hw->tx) {
-+		/* Initially fill TX FIFO with as much data as possible */
-+		ltq_spi_txfifo_write(hw);
-+		irq_flags |= LTQ_SPI_IRNEN_T;
-+
-+		/* Always enable RX interrupt in Full Duplex mode */
-+		if (hw->rx)
-+			irq_flags |= LTQ_SPI_IRNEN_R;
-+	} else if (hw->rx) {
-+		/* Start RX clock */
-+		ltq_spi_rxreq_set(hw);
-+
-+		/* Enable RX interrupt to receive data from RX FIFOs */
-+		irq_flags |= LTQ_SPI_IRNEN_R;
-+	}
-+
-+	/* Enable TX or RX interrupts */
-+	ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN);
-+	wait_for_completion_interruptible(&hw->done);
-+
-+	/* Disable all interrupts */
-+	ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
-+
-+	/*
-+	 * Return length of current transfer for bitbang utility code if
-+	 * no errors occured during transmission.
-+	 */
-+	if (!hw->status)
-+		hw->status = hw->len;
-+
-+	return hw->status;
-+}
-+
-+static const struct ltq_spi_irq_map {
-+	char *name;
-+	irq_handler_t handler;
-+} ltq_spi_irqs[] = {
-+	{ "spi_rx", ltq_spi_rx_irq },
-+	{ "spi_tx", ltq_spi_tx_irq },
-+	{ "spi_err", ltq_spi_err_irq },
-+};
-+
-+static int ltq_spi_probe(struct platform_device *pdev)
-+{
-+	struct resource irqres[3];
-+	struct spi_master *master;
-+	struct resource *r;
-+	struct ltq_spi *hw;
-+	int ret, i;
-+	u32 data, id;
-+
-+	if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 3) != 3) {
-+		dev_err(&pdev->dev, "IRQ settings missing in device tree\n");
-+		return -EINVAL;
-+	}
-+
-+	master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi));
-+	if (!master) {
-+		dev_err(&pdev->dev, "spi_alloc_master\n");
-+		ret = -ENOMEM;
-+		goto err;
-+	}
-+
-+	hw = spi_master_get_devdata(master);
-+
-+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (r == NULL) {
-+		dev_err(&pdev->dev, "platform_get_resource\n");
-+		ret = -ENOENT;
-+		goto err_master;
-+	}
-+
-+	r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
-+			pdev->name);
-+	if (!r) {
-+		dev_err(&pdev->dev, "failed to request memory region\n");
-+		ret = -ENXIO;
-+		goto err_master;
-+	}
-+
-+	hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
-+	if (!hw->base) {
-+		dev_err(&pdev->dev, "failed to remap memory region\n");
-+		ret = -ENXIO;
-+		goto err_master;
-+	}
-+
-+	memset(hw->irq, 0, sizeof(hw->irq));
-+	for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) {
-+		hw->irq[i] = irqres[i].start;
-+		ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler,
-+				  0, ltq_spi_irqs[i].name, hw);
-+		if (ret) {
-+			dev_err(&pdev->dev, "failed to request %s irq (%d)\n",
-+					ltq_spi_irqs[i].name, hw->irq[i]);
-+			goto err_irq;
-+		}
-+	}
-+
-+	hw->fpiclk = clk_get_fpi();
-+	if (IS_ERR(hw->fpiclk)) {
-+		dev_err(&pdev->dev, "failed to get fpi clock\n");
-+		ret = PTR_ERR(hw->fpiclk);
-+		goto err_clk;
-+	}
-+
-+	hw->spiclk = clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(hw->spiclk)) {
-+		dev_err(&pdev->dev, "failed to get spi clock gate\n");
-+		ret = PTR_ERR(hw->spiclk);
-+		goto err_clk;
-+	}
-+
-+	hw->bitbang.master = spi_master_get(master);
-+	hw->bitbang.chipselect = ltq_spi_chipselect;
-+	hw->bitbang.setup_transfer = ltq_spi_setup_transfer;
-+	hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs;
-+
-+	if (of_machine_is_compatible("lantiq,ase"))
-+		master->num_chipselect = 3;
-+	else
-+		master->num_chipselect = 6;
-+	master->bus_num = pdev->id;
-+	master->setup = ltq_spi_setup;
-+	master->cleanup = ltq_spi_cleanup;
-+	master->dev.of_node = pdev->dev.of_node;
-+
-+	hw->dev = &pdev->dev;
-+	init_completion(&hw->done);
-+	spin_lock_init(&hw->lock);
-+
-+	ltq_spi_hw_enable(hw);
-+
-+	/* Read module capabilities */
-+	id = ltq_spi_reg_read(hw, LTQ_SPI_ID);
-+	hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
-+	hw->rxfs = (id >> LTQ_SPI_ID_RXFS_SHIFT) & LTQ_SPI_ID_RXFS_MASK;
-+	hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0;
-+
-+	ltq_spi_config_mode_set(hw);
-+
-+	/* Enable error checking, disable TX/RX, set idle value high */
-+	data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
-+	    LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN |
-+	    LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE;
-+	ltq_spi_reg_write(hw, data, LTQ_SPI_CON);
-+
-+	/* Enable master mode and clear error flags */
-+	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS |
-+			  LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-+
-+	/* Reset GPIO/CS registers */
-+	ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON);
-+	ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO);
-+
-+	/* Enable and flush FIFOs */
-+	ltq_spi_reset_fifos(hw);
-+
-+	ret = spi_bitbang_start(&hw->bitbang);
-+	if (ret) {
-+		dev_err(&pdev->dev, "spi_bitbang_start failed\n");
-+		goto err_bitbang;
-+	}
-+
-+	platform_set_drvdata(pdev, hw);
-+
-+	pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n",
-+		id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support);
-+
-+	return 0;
-+
-+err_bitbang:
-+	ltq_spi_hw_disable(hw);
-+
-+err_clk:
-+	if (hw->fpiclk)
-+		clk_put(hw->fpiclk);
-+	if (hw->spiclk)
-+		clk_put(hw->spiclk);
-+
-+err_irq:
-+	clk_put(hw->fpiclk);
-+
-+	for (; i > 0; i--)
-+		free_irq(hw->irq[i], hw);
-+
-+err_master:
-+	spi_master_put(master);
-+
-+err:
-+	return ret;
-+}
-+
-+static int ltq_spi_remove(struct platform_device *pdev)
-+{
-+	struct ltq_spi *hw = platform_get_drvdata(pdev);
-+	int i;
-+
-+	spi_bitbang_stop(&hw->bitbang);
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	ltq_spi_config_mode_set(hw);
-+	ltq_spi_hw_disable(hw);
-+
-+	for (i = 0; i < ARRAY_SIZE(hw->irq); i++)
-+		if (0 < hw->irq[i])
-+			free_irq(hw->irq[i], hw);
-+
-+	if (hw->fpiclk)
-+		clk_put(hw->fpiclk);
-+	if (hw->spiclk)
-+		clk_put(hw->spiclk);
-+
-+	spi_master_put(hw->bitbang.master);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id ltq_spi_match[] = {
-+	{ .compatible = "lantiq,spi-xway" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_spi_match);
-+
-+static struct platform_driver ltq_spi_driver = {
-+	.probe = ltq_spi_probe,
-+	.remove = ltq_spi_remove,
-+	.driver = {
-+		.name = "spi-xway",
-+		.owner = THIS_MODULE,
-+		.of_match_table = ltq_spi_match,
-+	},
-+};
-+
-+module_platform_driver(ltq_spi_driver);
-+
-+MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
-+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:spi-xway");
diff --git a/target/linux/lantiq/patches-3.18/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch b/target/linux/lantiq/patches-3.18/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
deleted file mode 100644
index 6590b7b008..0000000000
--- a/target/linux/lantiq/patches-3.18/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From b1b9fca8c317afc3f2b78bb54f877e8a830a819d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 18:47:27 +0200
-Subject: [PATCH 34/36] reset: Fix compile when reset RESET_CONTROLLER is not
- selected
-
-Drivers need to protect their reset api calls with #ifdef to avoid compile
-errors.
-
-This patch adds dummy wrappers in the same way that linux/of.h does it.
-
-Cc: linux-kernel@vger.kernel.org
-Cc: Philipp Zabel <p.zabel@pengutronix.de>
-Cc: Gabor Juhos <juhosg@openwrt.org>
----
- include/linux/reset-controller.h |   16 ++++++++++++++
- include/linux/reset.h            |   43 ++++++++++++++++++++++++++++++++++++++
- 2 files changed, 59 insertions(+)
-
---- a/include/linux/reset-controller.h
-+++ b/include/linux/reset-controller.h
-@@ -46,7 +46,23 @@ struct reset_controller_dev {
- 	unsigned int nr_resets;
- };
- 
-+#if defined(CONFIG_RESET_CONTROLLER)
-+
- int reset_controller_register(struct reset_controller_dev *rcdev);
- void reset_controller_unregister(struct reset_controller_dev *rcdev);
- 
-+#else
-+
-+static inline int reset_controller_register(struct reset_controller_dev *rcdev)
-+{
-+	return -ENOSYS;
-+}
-+
-+void reset_controller_unregister(struct reset_controller_dev *rcdev)
-+{
-+
-+}
-+
-+#endif
-+
- #endif
diff --git a/target/linux/lantiq/patches-3.18/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-3.18/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
deleted file mode 100644
index 2fc4db3066..0000000000
--- a/target/linux/lantiq/patches-3.18/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++ /dev/null
@@ -1,614 +0,0 @@
-From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 10 Sep 2014 22:42:14 +0200
-Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h  |    6 +
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    3 +
- arch/mips/lantiq/xway/Makefile                     |    3 +
- arch/mips/lantiq/xway/ath_eep.c                    |  282 ++++++++++++++++++++
- arch/mips/lantiq/xway/eth_mac.c                    |   76 ++++++
- arch/mips/lantiq/xway/pci-ath-fixup.c              |  109 ++++++++
- arch/mips/lantiq/xway/rt_eep.c                     |   60 +++++
- 7 files changed, 539 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
- create mode 100644 arch/mips/lantiq/xway/ath_eep.c
- create mode 100644 arch/mips/lantiq/xway/eth_mac.c
- create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
- create mode 100644 arch/mips/lantiq/xway/rt_eep.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
-@@ -0,0 +1,6 @@
-+#ifndef _PCI_ATH_FIXUP
-+#define _PCI_ATH_FIXUP
-+
-+void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
-+
-+#endif /* _PCI_ATH_FIXUP */
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev,
- extern void ltq_pmu_enable(unsigned int module);
- extern void ltq_pmu_disable(unsigned int module);
- 
-+/* allow the ethernet driver to load a flash mapped mac addr */
-+const u8* ltq_get_eth_mac(void);
-+
- #endif /* CONFIG_SOC_TYPE_XWAY */
- #endif /* _LTQ_XWAY_H__ */
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o
- 
- obj-y += vmmc.o tffs.o
- 
-+obj-y += eth_mac.o
-+obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
-+
- obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/ath_eep.c
-@@ -0,0 +1,282 @@
-+/*
-+ *  Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
-+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ *  Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
-+ *  Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *  Copyright (C) 2013 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ath5k_platform.h>
-+#include <linux/ath9k_platform.h>
-+#include <linux/pci.h>
-+#include <linux/err.h>
-+#include <linux/mtd/mtd.h>
-+#include <pci-ath-fixup.h>
-+#include <lantiq_soc.h>
-+
-+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
-+struct ath5k_platform_data ath5k_pdata;
-+struct ath9k_platform_data ath9k_pdata = {
-+	.led_pin = -1,
-+};
-+static u8 athxk_eeprom_mac[6];
-+
-+static int ath9k_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+	dev->dev.platform_data = &ath9k_pdata;
-+	return 0;
-+}
-+
-+static int ath9k_eep_load;
-+int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node, *mtd_np;
-+	struct resource *eep_res, *mac_res = NULL;
-+	void __iomem *eep, *mac;
-+	int mac_offset, led_pin;
-+	u32 mac_inc = 0, pci_slot = 0;
-+	int i;
-+	struct mtd_info *the_mtd;
-+	size_t flash_readlen;
-+	const __be32 *list;
-+	const char *part;
-+	phandle phandle;
-+
-+	if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
-+			sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
-+			(mtd_np = of_find_node_by_phandle(phandle)) && ((part =
-+			of_get_property(mtd_np, "label", NULL)) || (part =
-+			mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
-+			!= ERR_PTR(-ENODEV)) {
-+		i = mtd_read(the_mtd, be32_to_cpup(list),
-+				ATH9K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
-+				(void *) ath9k_pdata.eeprom_data);
-+		if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
-+			size_t mac_readlen;
-+			mtd_read(the_mtd, mac_offset, 6, &mac_readlen,
-+				(void *) athxk_eeprom_mac);
-+		}
-+		put_mtd_device(the_mtd);
-+		if ((sizeof(ath9k_pdata.eeprom_data) != flash_readlen) || i) {
-+			dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+			return -ENODEV;
-+		}
-+	} else {
-+		eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+		mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+
-+		if (!eep_res) {
-+			dev_err(&pdev->dev, "failed to load eeprom address\n");
-+			return -ENODEV;
-+		}
-+		if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS << 1) {
-+			dev_err(&pdev->dev, "eeprom has an invalid size\n");
-+			return -EINVAL;
-+		}
-+
-+		eep = ioremap(eep_res->start, resource_size(eep_res));
-+		memcpy_fromio(ath9k_pdata.eeprom_data, eep,
-+				ATH9K_PLAT_EEP_MAX_WORDS << 1);
-+	}
-+
-+	if (of_find_property(np, "ath,eep-swap", NULL))
-+		for (i = 0; i < ATH9K_PLAT_EEP_MAX_WORDS; i++)
-+			ath9k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]);
-+
-+	if (of_find_property(np, "ath,eep-endian", NULL)) {
-+		ath9k_pdata.endian_check = true;
-+
-+		dev_info(&pdev->dev, "endian check enabled.\n");
-+	}
-+
-+	if (!is_valid_ether_addr(athxk_eeprom_mac)) {
-+		if (mac_res) {
-+			if (resource_size(mac_res) != 6) {
-+				dev_err(&pdev->dev, "mac has an invalid size\n");
-+				return -EINVAL;
-+			}
-+			mac = ioremap(mac_res->start, resource_size(mac_res));
-+			memcpy_fromio(athxk_eeprom_mac, mac, 6);
-+		} else if (ltq_get_eth_mac()) {
-+			memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
-+		}
-+	}
-+	if (!is_valid_ether_addr(athxk_eeprom_mac)) {
-+		dev_warn(&pdev->dev, "using random mac\n");
-+		random_ether_addr(athxk_eeprom_mac);
-+	}
-+
-+	if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
-+		athxk_eeprom_mac[5] += mac_inc;
-+
-+	ath9k_pdata.macaddr = athxk_eeprom_mac;
-+	ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init;
-+
-+	if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
-+		ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
-+
-+		dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
-+                if (ath9k_eep_load) {
-+                        struct pci_dev *d = NULL;
-+                        while ((d = pci_get_device(PCI_VENDOR_ID_ATHEROS,
-+                                        PCI_ANY_ID, d)) != NULL)
-+                                pci_fixup_device(pci_fixup_early, d);
-+                }
-+
-+	}
-+
-+	if (!of_property_read_u32(np, "ath,led-pin", &led_pin)) {
-+		ath9k_pdata.led_pin = led_pin;
-+		dev_info(&pdev->dev, "using led pin %d.\n", led_pin);
-+	}
-+
-+	dev_info(&pdev->dev, "loaded ath9k eeprom\n");
-+
-+	return 0;
-+}
-+
-+static struct of_device_id ath9k_eeprom_ids[] = {
-+	{ .compatible = "ath9k,eeprom" },
-+	{ }
-+};
-+
-+static struct platform_driver ath9k_eeprom_driver = {
-+	.driver		= {
-+		.name		= "ath9k,eeprom",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(ath9k_eeprom_ids),
-+	},
-+};
-+
-+static int __init of_ath9k_eeprom_init(void)
-+{
-+        int ret = platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
-+
-+        if (ret)
-+                ath9k_eep_load = 1;
-+
-+        return ret;
-+}
-+
-+static int __init of_ath9k_eeprom_init_late(void)
-+{
-+        if (!ath9k_eep_load)
-+                return 0;
-+        return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
-+}
-+late_initcall(of_ath9k_eeprom_init_late);
-+subsys_initcall(of_ath9k_eeprom_init);
-+
-+
-+static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+	dev->dev.platform_data = &ath5k_pdata;
-+	return 0;
-+}
-+
-+int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node, *mtd_np;
-+	struct resource *eep_res, *mac_res = NULL;
-+	void __iomem *eep, *mac;
-+	int mac_offset;
-+	u32 mac_inc = 0;
-+	int i;
-+	struct mtd_info *the_mtd;
-+	size_t flash_readlen;
-+	const __be32 *list;
-+	const char *part;
-+	phandle phandle;
-+
-+	if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
-+			sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
-+			(mtd_np = of_find_node_by_phandle(phandle)) && ((part =
-+			of_get_property(mtd_np, "label", NULL)) || (part =
-+			mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
-+			!= ERR_PTR(-ENODEV)) {
-+		i = mtd_read(the_mtd, be32_to_cpup(list),
-+				ATH5K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
-+				(void *) ath5k_pdata.eeprom_data);
-+		put_mtd_device(the_mtd);
-+		if ((sizeof(ATH5K_PLAT_EEP_MAX_WORDS << 1) != flash_readlen)
-+				|| i) {
-+			dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+			return -ENODEV;
-+		}
-+	} else {
-+		eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+		mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+
-+		if (!eep_res) {
-+			dev_err(&pdev->dev, "failed to load eeprom address\n");
-+			return -ENODEV;
-+		}
-+		if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS << 1) {
-+			dev_err(&pdev->dev, "eeprom has an invalid size\n");
-+			return -EINVAL;
-+		}
-+
-+		eep = ioremap(eep_res->start, resource_size(eep_res));
-+		ath5k_pdata.eeprom_data = kmalloc(ATH5K_PLAT_EEP_MAX_WORDS<<1,
-+				GFP_KERNEL);
-+		memcpy_fromio(ath5k_pdata.eeprom_data, eep,
-+				ATH5K_PLAT_EEP_MAX_WORDS << 1);
-+	}
-+
-+	if (of_find_property(np, "ath,eep-swap", NULL))
-+		for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
-+			ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
-+
-+	if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
-+		memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_pdata.eeprom_data + mac_offset, 6);
-+	} else if (mac_res) {
-+		if (resource_size(mac_res) != 6) {
-+			dev_err(&pdev->dev, "mac has an invalid size\n");
-+			return -EINVAL;
-+		}
-+		mac = ioremap(mac_res->start, resource_size(mac_res));
-+		memcpy_fromio(athxk_eeprom_mac, mac, 6);
-+	} else if (ltq_get_eth_mac())
-+		memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
-+	else {
-+		dev_warn(&pdev->dev, "using random mac\n");
-+		random_ether_addr(athxk_eeprom_mac);
-+	}
-+
-+	if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
-+		athxk_eeprom_mac[5] += mac_inc;
-+
-+	ath5k_pdata.macaddr = athxk_eeprom_mac;
-+	ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
-+
-+	dev_info(&pdev->dev, "loaded ath5k eeprom\n");
-+
-+	return 0;
-+}
-+
-+static struct of_device_id ath5k_eeprom_ids[] = {
-+	{ .compatible = "ath5k,eeprom" },
-+	{ }
-+};
-+
-+static struct platform_driver ath5k_eeprom_driver = {
-+	.driver		= {
-+		.name		= "ath5k,eeprom",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(ath5k_eeprom_ids),
-+	},
-+};
-+
-+static int __init of_ath5k_eeprom_init(void)
-+{
-+	return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
-+}
-+device_initcall(of_ath5k_eeprom_init);
---- /dev/null
-+++ b/arch/mips/lantiq/xway/eth_mac.c
-@@ -0,0 +1,76 @@
-+/*
-+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/if_ether.h>
-+
-+static u8 eth_mac[6];
-+static int eth_mac_set;
-+
-+const u8* ltq_get_eth_mac(void)
-+{
-+	return eth_mac;
-+}
-+
-+static int __init setup_ethaddr(char *str)
-+{
-+	eth_mac_set = mac_pton(str, eth_mac);
-+	return !eth_mac_set;
-+}
-+__setup("ethaddr=", setup_ethaddr);
-+
-+int __init of_eth_mac_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct resource *mac_res;
-+	void __iomem *mac;
-+	u32 mac_inc = 0;
-+
-+	if (eth_mac_set) {
-+		dev_err(&pdev->dev, "mac was already set by bootloader\n");
-+		return -EINVAL;
-+	}
-+	mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+	if (!mac_res) {
-+		dev_err(&pdev->dev, "failed to load mac\n");
-+		return -EINVAL;
-+	}
-+	if (resource_size(mac_res) != 6) {
-+		dev_err(&pdev->dev, "mac has an invalid size\n");
-+		return -EINVAL;
-+	}
-+	mac = ioremap(mac_res->start, resource_size(mac_res));
-+	memcpy_fromio(eth_mac, mac, 6);
-+
-+	if (!of_property_read_u32(np, "mac-increment", &mac_inc))
-+		eth_mac[5] += mac_inc;
-+
-+	return 0;
-+}
-+
-+static struct of_device_id eth_mac_ids[] = {
-+	{ .compatible = "lantiq,eth-mac" },
-+	{ /* sentinel */ }
-+};
-+
-+static struct platform_driver eth_mac_driver = {
-+	.driver		= {
-+		.name		= "lantiq,eth-mac",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(eth_mac_ids),
-+	},
-+};
-+
-+static int __init of_eth_mac_init(void)
-+{
-+	return platform_driver_probe(&eth_mac_driver, of_eth_mac_probe);
-+}
-+device_initcall(of_eth_mac_init);
---- /dev/null
-+++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
-@@ -0,0 +1,118 @@
-+/*
-+ *  Atheros AP94 reference board PCI initialization
-+ *
-+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <lantiq_soc.h>
-+
-+struct ath_fixup {
-+	u16		*cal_data;
-+	unsigned	slot;
-+};
-+
-+static int ath_num_fixups;
-+static struct ath_fixup ath_fixups[2];
-+
-+static void ath_pci_fixup(struct pci_dev *dev)
-+{
-+	void __iomem *mem;
-+	struct pci_dev *bridge = pci_upstream_bridge(dev); 
-+	u16 *cal_data = NULL;
-+	u16 cmd;
-+	u32 bar0;
-+	u32 val;
-+	u32 base;
-+	unsigned i;
-+
-+	for (i = 0; i < ath_num_fixups; i++) {
-+		if (ath_fixups[i].cal_data == NULL)
-+			continue;
-+
-+		if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
-+			continue;
-+
-+		cal_data = ath_fixups[i].cal_data;
-+		break;
-+	}
-+
-+	if (cal_data == NULL)
-+		return;
-+
-+	if (*cal_data != 0xa55a) {
-+		pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+		return;
-+	}
-+
-+	pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+	base = dev->resource[0].start;
-+	mem = ioremap(base, 0x10000);
-+	if (!mem) {
-+		pr_err("pci %s: ioremap error\n", pci_name(dev));
-+		return;
-+	}
-+
-+	if (bridge) {
-+		pci_enable_device(dev);
-+	}
-+
-+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, base);
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	/* set pointer to first reg address */
-+	cal_data += 3;
-+	while (*cal_data != 0xffff) {
-+		u32 reg;
-+		reg = *cal_data++;
-+		val = *cal_data++;
-+		val |= (*cal_data++) << 16;
-+
-+		ltq_w32(swab32(val), mem + reg);
-+		udelay(100);
-+	}
-+
-+	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+	dev->vendor = val & 0xffff;
-+	dev->device = (val >> 16) & 0xffff;
-+
-+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+	dev->revision = val & 0xff;
-+	dev->class = val >> 8; /* upper 3 bytes */
-+
-+	pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n", 
-+		pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+	if (bridge) {
-+		pci_disable_device(dev);
-+	}
-+
-+	iounmap(mem);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
-+
-+void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
-+{
-+	if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
-+		return;
-+
-+	ath_fixups[ath_num_fixups].slot = slot;
-+	ath_fixups[ath_num_fixups].cal_data = cal_data;
-+	ath_num_fixups++;
-+}
---- /dev/null
-+++ b/arch/mips/lantiq/xway/rt_eep.c
-@@ -0,0 +1,60 @@
-+/*
-+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
-+static struct rt2x00_platform_data rt2x00_pdata;
-+
-+static int rt2x00_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+	dev->dev.platform_data = &rt2x00_pdata;
-+	return 0;
-+}
-+
-+int __init of_ralink_eeprom_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	const char *eeprom;
-+
-+	if (of_property_read_string(np, "ralink,eeprom", &eeprom)) {
-+		dev_err(&pdev->dev, "failed to load eeprom filename\n");
-+		return 0;
-+	}
-+
-+	rt2x00_pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+//	rt2x00_pdata.mac_address = mac;
-+	ltq_pci_plat_dev_init = rt2x00_pci_plat_dev_init;
-+
-+	dev_info(&pdev->dev, "using %s as eeprom\n", eeprom);
-+
-+	return 0;
-+}
-+
-+static struct of_device_id ralink_eeprom_ids[] = {
-+	{ .compatible = "ralink,eeprom" },
-+	{ }
-+};
-+
-+static struct platform_driver ralink_eeprom_driver = {
-+	.driver		= {
-+		.name		= "ralink,eeprom",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(ralink_eeprom_ids),
-+	},
-+};
-+
-+static int __init of_ralink_eeprom_init(void)
-+{
-+	return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe);
-+}
-+device_initcall(of_ralink_eeprom_init);
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -840,7 +840,11 @@ ltq_etop_init(struct net_device *dev)
- 	if (err)
- 		goto err_hw;
- 
--	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
-+	if (priv->mac)
-+		memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
-+	else
-+		memcpy(&mac.sa_data, ltq_get_eth_mac(), ETH_ALEN);
-+
- 	if (!is_valid_ether_addr(mac.sa_data)) {
- 		pr_warn("etop: invalid MAC, using random\n");
- 		eth_random_addr(mac.sa_data);
diff --git a/target/linux/lantiq/patches-3.18/0036-owrt-generic-dtb-image-hack.patch b/target/linux/lantiq/patches-3.18/0036-owrt-generic-dtb-image-hack.patch
deleted file mode 100644
index 7a306b301e..0000000000
--- a/target/linux/lantiq/patches-3.18/0036-owrt-generic-dtb-image-hack.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From dba8578e06aedf1e67312ebfc6162e2fadc9448d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:32:12 +0200
-Subject: [PATCH 36/36] owrt: generic dtb image hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/kernel/head.S |    3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -86,6 +86,9 @@ EXPORT(__image_cmdline)
- 	.fill	0x400
- #endif /* CONFIG_IMAGE_CMDLINE_HACK */
- 
-+	.ascii  "OWRTDTB:"
-+	EXPORT(__image_dtb)
-+	.fill   0x4000
- 	__REF
- 
- NESTED(kernel_entry, 16, sp)			# kernel entry point
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -32,7 +32,6 @@ choice
- config DT_EASY50712
- 	bool "Easy50712"
- 	depends on SOC_XWAY
--	select BUILTIN_DTB
- endchoice
- 
- config PCI_LANTIQ
diff --git a/target/linux/lantiq/patches-3.18/0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch b/target/linux/lantiq/patches-3.18/0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch
deleted file mode 100644
index 32e4ab89d9..0000000000
--- a/target/linux/lantiq/patches-3.18/0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From baea71233ed1796651cab6ead484a18666a765aa Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 11 Sep 2014 19:25:25 +0200
-Subject: [PATCH] MIPS: lantiq: move eiu init after irq_domain register
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/irq.c |   48 ++++++++++++++++++++++++------------------------
- 1 file changed, 24 insertions(+), 24 deletions(-)
-
---- a/arch/mips/lantiq/irq.c
-+++ b/arch/mips/lantiq/irq.c
-@@ -380,30 +380,6 @@ int __init icu_of_init(struct device_nod
- 			panic("Failed to remap icu memory");
- 	}
- 
--	/* the external interrupts are optional and xway only */
--	eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
--	if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
--		/* find out how many external irq sources we have */
--		exin_avail = of_irq_count(eiu_node);
--
--		if (exin_avail > MAX_EIU)
--			exin_avail = MAX_EIU;
--
--		ret = of_irq_to_resource_table(eiu_node,
--						ltq_eiu_irq, exin_avail);
--		if (ret != exin_avail)
--			panic("failed to load external irq resources");
--
--		if (request_mem_region(res.start, resource_size(&res),
--							res.name) < 0)
--			pr_err("Failed to request eiu memory");
--
--		ltq_eiu_membase = ioremap_nocache(res.start,
--							resource_size(&res));
--		if (!ltq_eiu_membase)
--			panic("Failed to remap eiu memory");
--	}
--
- 	/* turn off all irqs by default */
- 	for (i = 0; i < MAX_IM; i++) {
- 		/* make sure all irqs are turned off by default */
-@@ -460,6 +436,30 @@ int __init icu_of_init(struct device_nod
- 	if (MIPS_CPU_TIMER_IRQ != 7)
- 		irq_create_mapping(ltq_domain, MIPS_CPU_TIMER_IRQ);
- 
-+	/* the external interrupts are optional and xway only */
-+	eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
-+	if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
-+		/* find out how many external irq sources we have */
-+		exin_avail = of_irq_count(eiu_node);
-+
-+		if (exin_avail > MAX_EIU)
-+			exin_avail = MAX_EIU;
-+
-+		ret = of_irq_to_resource_table(eiu_node,
-+						ltq_eiu_irq, exin_avail);
-+		if (ret != exin_avail)
-+			panic("failed to load external irq resources");
-+
-+		if (request_mem_region(res.start, resource_size(&res),
-+							res.name) < 0)
-+			pr_err("Failed to request eiu memory");
-+
-+		ltq_eiu_membase = ioremap_nocache(res.start,
-+							resource_size(&res));
-+		if (!ltq_eiu_membase)
-+			panic("Failed to remap eiu memory");
-+	}
-+
- 	return 0;
- }
- 
diff --git a/target/linux/lantiq/patches-3.18/0038-MIPS-lantiq-fpi-on-ar9.patch b/target/linux/lantiq/patches-3.18/0038-MIPS-lantiq-fpi-on-ar9.patch
deleted file mode 100644
index 5fbe0a1137..0000000000
--- a/target/linux/lantiq/patches-3.18/0038-MIPS-lantiq-fpi-on-ar9.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-Return correct value for fpi clock on ar9.
-
-Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
----
- arch/mips/lantiq/xway/clk.c |    5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/arch/mips/lantiq/xway/clk.c
-+++ b/arch/mips/lantiq/xway/clk.c
-@@ -87,8 +87,9 @@ unsigned long ltq_ar9_fpi_hz(void)
- 	unsigned long sys = ltq_ar9_sys_hz();
- 
- 	if (ltq_cgu_r32(CGU_SYS) & BIT(0))
--		return sys;
--	return sys >> 1;
-+		return sys / 3;
-+	else
-+		return sys / 2;
- }
- 
- unsigned long ltq_ar9_cpu_hz(void)
diff --git a/target/linux/lantiq/patches-3.18/0039-MIPS-lantiq-initialize-usb-on-boot.patch b/target/linux/lantiq/patches-3.18/0039-MIPS-lantiq-initialize-usb-on-boot.patch
deleted file mode 100644
index fd0da8ed50..0000000000
--- a/target/linux/lantiq/patches-3.18/0039-MIPS-lantiq-initialize-usb-on-boot.patch
+++ /dev/null
@@ -1,97 +0,0 @@
---- a/arch/mips/lantiq/xway/reset.c
-+++ b/arch/mips/lantiq/xway/reset.c
-@@ -44,6 +44,37 @@
- #define RCU_BOOT_SEL(x)		((x >> 18) & 0x7)
- #define RCU_BOOT_SEL_XRX200(x)	(((x >> 17) & 0xf) | ((x >> 8) & 0x10))
- 
-+/* dwc2 USB configuration registers */
-+#define RCU_USB1CFG		0x0018
-+#define RCU_USB2CFG		0x0034
-+
-+/* USB DMA endianness bits */
-+#define RCU_USBCFG_HDSEL_BIT	BIT(11)
-+#define RCU_USBCFG_HOST_END_BIT	BIT(10)
-+#define RCU_USBCFG_SLV_END_BIT	BIT(9)
-+
-+/* USB reset bits */
-+#define RCU_USBRESET		0x0010
-+
-+#define USBRESET_BIT		BIT(4)
-+
-+#define RCU_USBRESET2		0x0048
-+
-+#define USB1RESET_BIT		BIT(4)
-+#define USB2RESET_BIT		BIT(5)
-+
-+#define RCU_CFG1A		0x0038
-+#define RCU_CFG1B		0x003C
-+
-+/* USB PMU devices */
-+#define PMU_AHBM		BIT(15)
-+#define PMU_USB0		BIT(6)
-+#define PMU_USB1		BIT(27)
-+
-+/* USB PHY PMU devices */
-+#define PMU_USB0_P		BIT(0)
-+#define PMU_USB1_P		BIT(26)
-+
- /* remapped base addr of the reset control unit */
- static void __iomem *ltq_rcu_membase;
- static struct device_node *ltq_rcu_np;
-@@ -200,6 +231,45 @@ static void ltq_machine_power_off(void)
- 	unreachable();
- }
- 
-+static void ltq_usb_init(void)
-+{
-+	/* Power for USB cores 1 & 2 */
-+	ltq_pmu_enable(PMU_AHBM);
-+	ltq_pmu_enable(PMU_USB0);
-+	ltq_pmu_enable(PMU_USB1);
-+
-+	ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A);
-+	ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B);
-+
-+	/* Enable USB PHY power for cores 1 & 2 */
-+	ltq_pmu_enable(PMU_USB0_P);
-+	ltq_pmu_enable(PMU_USB1_P);
-+
-+	/* Configure cores to host mode */
-+	ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+		RCU_USB1CFG);
-+	ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+		RCU_USB2CFG);
-+
-+	/* Select DMA endianness (Host-endian: big-endian) */
-+	ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
-+		| RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
-+	ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
-+		| RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
-+
-+	/* Hard reset USB state machines */
-+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
-+	udelay(50 * 1000);
-+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
-+
-+	/* Soft reset USB state machines */
-+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
-+		| USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
-+	udelay(50 * 1000);
-+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
-+		& ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
-+}
-+
- static int __init mips_reboot_setup(void)
- {
- 	struct resource res;
-@@ -223,6 +293,10 @@ static int __init mips_reboot_setup(void
- 	if (!ltq_rcu_membase)
- 		panic("Failed to remap core memory");
- 
-+	if (of_machine_is_compatible("lantiq,ar9") ||
-+	    of_machine_is_compatible("lantiq,vr9"))
-+		ltq_usb_init();
-+
- 	_machine_restart = ltq_machine_restart;
- 	_machine_halt = ltq_machine_halt;
- 	pm_power_off = ltq_machine_power_off;
diff --git a/target/linux/lantiq/patches-3.18/0040-USB-DWC2-enable-usb-power-gpio.patch b/target/linux/lantiq/patches-3.18/0040-USB-DWC2-enable-usb-power-gpio.patch
deleted file mode 100644
index 76fbb7bac7..0000000000
--- a/target/linux/lantiq/patches-3.18/0040-USB-DWC2-enable-usb-power-gpio.patch
+++ /dev/null
@@ -1,35 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -40,6 +40,7 @@
- #include <linux/device.h>
- #include <linux/dma-mapping.h>
- #include <linux/of_device.h>
-+#include <linux/of_gpio.h>
- #include <linux/platform_device.h>
- 
- #include <linux/usb/of.h>
-@@ -154,6 +155,7 @@ static int dwc2_driver_probe(struct plat
- 	struct resource *res;
- 	int retval;
- 	int irq;
-+	int gpio_count;
- 
- 	if (usb_disabled())
- 		return -ENODEV;
-@@ -173,6 +175,16 @@ static int dwc2_driver_probe(struct plat
- 		defparams.dma_desc_enable = 0;
- 	}
- 
-+	gpio_count = of_gpio_count(dev->dev.of_node);
-+	while (gpio_count > 0) {
-+		enum of_gpio_flags flags;
-+		int gpio = of_get_gpio_flags(dev->dev.of_node, --gpio_count, &flags);
-+		if (gpio_request(gpio, "usb"))
-+			continue;
-+		dev_info(&dev->dev, "requested GPIO %d\n", gpio);
-+		gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+	}
-+
- 	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
- 	if (!hsotg)
- 		return -ENOMEM;
diff --git a/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch
deleted file mode 100644
index 2d9cb0f63f..0000000000
--- a/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -106,6 +106,34 @@ static const struct dwc2_core_params par
- 	.uframe_sched			= -1,
- };
- 
-+static const struct dwc2_core_params params_ltq = {
-+	.otg_cap			= 2,	/* non-HNP/non-SRP */
-+	.otg_ver			= -1,
-+	.dma_enable			= -1,
-+	.dma_desc_enable		= -1,
-+	.speed				= -1,
-+	.enable_dynamic_fifo		= -1,
-+	.en_multiple_tx_fifo		= -1,
-+	.host_rx_fifo_size		= 288,	/* 288 DWORDs */
-+	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
-+	.host_perio_tx_fifo_size	= 96,	/* 96 DWORDs */
-+	.max_transfer_size		= -1,
-+	.max_packet_count		= 511,
-+	.host_channels			= -1,
-+	.phy_type			= -1,
-+	.phy_utmi_width			= -1,
-+	.phy_ulpi_ddr			= -1,
-+	.phy_ulpi_ext_vbus		= -1,
-+	.i2c_enable			= -1,
-+	.ulpi_fs_ls			= -1,
-+	.host_support_fs_ls_low_power	= -1,
-+	.host_ls_low_power_phy_clk	= -1,
-+	.ts_dline			= -1,
-+	.reload_ctl			= -1,
-+	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT,
-+	.uframe_sched			= -1,
-+};
-+
- /**
-  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
-  * DWC_otg driver
-@@ -129,6 +157,8 @@ static int dwc2_driver_remove(struct pla
- static const struct of_device_id dwc2_of_match_table[] = {
- 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
- 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
-+	{ .compatible = "lantiq,ifxhcd-arx100-dwc2", .data = &params_ltq },
-+	{ .compatible = "lantiq,ifxhcd-xrx200-dwc2", .data = &params_ltq },
- 	{ .compatible = "snps,dwc2", .data = NULL },
- 	{},
- };
diff --git a/target/linux/lantiq/patches-3.18/0042-USB-DWC2-big-endian-support.patch b/target/linux/lantiq/patches-3.18/0042-USB-DWC2-big-endian-support.patch
deleted file mode 100644
index 0455d35514..0000000000
--- a/target/linux/lantiq/patches-3.18/0042-USB-DWC2-big-endian-support.patch
+++ /dev/null
@@ -1,3184 +0,0 @@
---- a/drivers/usb/dwc2/core.c
-+++ b/drivers/usb/dwc2/core.c
-@@ -67,10 +67,10 @@ static void dwc2_enable_common_interrupt
- 	u32 intmsk;
- 
- 	/* Clear any pending OTG Interrupts */
--	writel(0xffffffff, hsotg->regs + GOTGINT);
-+	dwc2_writel(0xffffffff, hsotg->regs + GOTGINT);
- 
- 	/* Clear any pending interrupts */
--	writel(0xffffffff, hsotg->regs + GINTSTS);
-+	dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
- 
- 	/* Enable the interrupts in the GINTMSK */
- 	intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT;
-@@ -81,7 +81,7 @@ static void dwc2_enable_common_interrupt
- 	intmsk |= GINTSTS_CONIDSTSCHNG | GINTSTS_WKUPINT | GINTSTS_USBSUSP |
- 		  GINTSTS_SESSREQINT;
- 
--	writel(intmsk, hsotg->regs + GINTMSK);
-+	dwc2_writel(intmsk, hsotg->regs + GINTMSK);
- }
- 
- /*
-@@ -104,10 +104,10 @@ static void dwc2_init_fs_ls_pclk_sel(str
- 	}
- 
- 	dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
--	hcfg = readl(hsotg->regs + HCFG);
-+	hcfg = dwc2_readl(hsotg->regs + HCFG);
- 	hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
- 	hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
--	writel(hcfg, hsotg->regs + HCFG);
-+	dwc2_writel(hcfg, hsotg->regs + HCFG);
- }
- 
- /*
-@@ -125,7 +125,7 @@ static int dwc2_core_reset(struct dwc2_h
- 	/* Wait for AHB master IDLE state */
- 	do {
- 		usleep_range(20000, 40000);
--		greset = readl(hsotg->regs + GRSTCTL);
-+		greset = dwc2_readl(hsotg->regs + GRSTCTL);
- 		if (++count > 50) {
- 			dev_warn(hsotg->dev,
- 				 "%s() HANG! AHB Idle GRSTCTL=%0x\n",
-@@ -137,10 +137,10 @@ static int dwc2_core_reset(struct dwc2_h
- 	/* Core Soft Reset */
- 	count = 0;
- 	greset |= GRSTCTL_CSFTRST;
--	writel(greset, hsotg->regs + GRSTCTL);
-+	dwc2_writel(greset, hsotg->regs + GRSTCTL);
- 	do {
- 		usleep_range(20000, 40000);
--		greset = readl(hsotg->regs + GRSTCTL);
-+		greset = dwc2_readl(hsotg->regs + GRSTCTL);
- 		if (++count > 50) {
- 			dev_warn(hsotg->dev,
- 				 "%s() HANG! Soft Reset GRSTCTL=%0x\n",
-@@ -150,20 +150,20 @@ static int dwc2_core_reset(struct dwc2_h
- 	} while (greset & GRSTCTL_CSFTRST);
- 
- 	if (hsotg->dr_mode == USB_DR_MODE_HOST) {
--		gusbcfg = readl(hsotg->regs + GUSBCFG);
-+		gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 		gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
- 		gusbcfg |= GUSBCFG_FORCEHOSTMODE;
--		writel(gusbcfg, hsotg->regs + GUSBCFG);
-+		dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- 	} else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) {
--		gusbcfg = readl(hsotg->regs + GUSBCFG);
-+		gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 		gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
- 		gusbcfg |= GUSBCFG_FORCEDEVMODE;
--		writel(gusbcfg, hsotg->regs + GUSBCFG);
-+		dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- 	} else if (hsotg->dr_mode == USB_DR_MODE_OTG) {
--		gusbcfg = readl(hsotg->regs + GUSBCFG);
-+		gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 		gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
- 		gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
--		writel(gusbcfg, hsotg->regs + GUSBCFG);
-+		dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- 	}
- 
- 	/*
-@@ -186,9 +186,9 @@ static int dwc2_fs_phy_init(struct dwc2_
- 	 */
- 	if (select_phy) {
- 		dev_dbg(hsotg->dev, "FS PHY selected\n");
--		usbcfg = readl(hsotg->regs + GUSBCFG);
-+		usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 		usbcfg |= GUSBCFG_PHYSEL;
--		writel(usbcfg, hsotg->regs + GUSBCFG);
-+		dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- 
- 		/* Reset after a PHY select */
- 		retval = dwc2_core_reset(hsotg);
-@@ -211,18 +211,18 @@ static int dwc2_fs_phy_init(struct dwc2_
- 		dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
- 
- 		/* Program GUSBCFG.OtgUtmiFsSel to I2C */
--		usbcfg = readl(hsotg->regs + GUSBCFG);
-+		usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 		usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
--		writel(usbcfg, hsotg->regs + GUSBCFG);
-+		dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- 
- 		/* Program GI2CCTL.I2CEn */
--		i2cctl = readl(hsotg->regs + GI2CCTL);
-+		i2cctl = dwc2_readl(hsotg->regs + GI2CCTL);
- 		i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
- 		i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
- 		i2cctl &= ~GI2CCTL_I2CEN;
--		writel(i2cctl, hsotg->regs + GI2CCTL);
-+		dwc2_writel(i2cctl, hsotg->regs + GI2CCTL);
- 		i2cctl |= GI2CCTL_I2CEN;
--		writel(i2cctl, hsotg->regs + GI2CCTL);
-+		dwc2_writel(i2cctl, hsotg->regs + GI2CCTL);
- 	}
- 
- 	return retval;
-@@ -236,7 +236,7 @@ static int dwc2_hs_phy_init(struct dwc2_
- 	if (!select_phy)
- 		return 0;
- 
--	usbcfg = readl(hsotg->regs + GUSBCFG);
-+	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 
- 	/*
- 	 * HS PHY parameters. These parameters are preserved during soft reset
-@@ -264,7 +264,7 @@ static int dwc2_hs_phy_init(struct dwc2_
- 		break;
- 	}
- 
--	writel(usbcfg, hsotg->regs + GUSBCFG);
-+	dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- 
- 	/* Reset after setting the PHY parameters */
- 	retval = dwc2_core_reset(hsotg);
-@@ -299,15 +299,15 @@ static int dwc2_phy_init(struct dwc2_hso
- 	    hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
- 	    hsotg->core_params->ulpi_fs_ls > 0) {
- 		dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
--		usbcfg = readl(hsotg->regs + GUSBCFG);
-+		usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 		usbcfg |= GUSBCFG_ULPI_FS_LS;
- 		usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
--		writel(usbcfg, hsotg->regs + GUSBCFG);
-+		dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- 	} else {
--		usbcfg = readl(hsotg->regs + GUSBCFG);
-+		usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 		usbcfg &= ~GUSBCFG_ULPI_FS_LS;
- 		usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
--		writel(usbcfg, hsotg->regs + GUSBCFG);
-+		dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- 	}
- 
- 	return retval;
-@@ -315,7 +315,7 @@ static int dwc2_phy_init(struct dwc2_hso
- 
- static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
- {
--	u32 ahbcfg = readl(hsotg->regs + GAHBCFG);
-+	u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
- 
- 	switch (hsotg->hw_params.arch) {
- 	case GHWCFG2_EXT_DMA_ARCH:
-@@ -354,7 +354,7 @@ static int dwc2_gahbcfg_init(struct dwc2
- 	if (hsotg->core_params->dma_enable > 0)
- 		ahbcfg |= GAHBCFG_DMA_EN;
- 
--	writel(ahbcfg, hsotg->regs + GAHBCFG);
-+	dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
- 
- 	return 0;
- }
-@@ -363,7 +363,7 @@ static void dwc2_gusbcfg_init(struct dwc
- {
- 	u32 usbcfg;
- 
--	usbcfg = readl(hsotg->regs + GUSBCFG);
-+	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 	usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
- 
- 	switch (hsotg->hw_params.op_mode) {
-@@ -391,7 +391,7 @@ static void dwc2_gusbcfg_init(struct dwc
- 		break;
- 	}
- 
--	writel(usbcfg, hsotg->regs + GUSBCFG);
-+	dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- }
- 
- /**
-@@ -409,7 +409,7 @@ int dwc2_core_init(struct dwc2_hsotg *hs
- 
- 	dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
- 
--	usbcfg = readl(hsotg->regs + GUSBCFG);
-+	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 
- 	/* Set ULPI External VBUS bit if needed */
- 	usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
-@@ -422,7 +422,7 @@ int dwc2_core_init(struct dwc2_hsotg *hs
- 	if (hsotg->core_params->ts_dline > 0)
- 		usbcfg |= GUSBCFG_TERMSELDLPULSE;
- 
--	writel(usbcfg, hsotg->regs + GUSBCFG);
-+	dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- 
- 	/* Reset the Controller */
- 	retval = dwc2_core_reset(hsotg);
-@@ -448,11 +448,11 @@ int dwc2_core_init(struct dwc2_hsotg *hs
- 	dwc2_gusbcfg_init(hsotg);
- 
- 	/* Program the GOTGCTL register */
--	otgctl = readl(hsotg->regs + GOTGCTL);
-+	otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 	otgctl &= ~GOTGCTL_OTGVER;
- 	if (hsotg->core_params->otg_ver > 0)
- 		otgctl |= GOTGCTL_OTGVER;
--	writel(otgctl, hsotg->regs + GOTGCTL);
-+	dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
- 	dev_dbg(hsotg->dev, "OTG VER PARAM: %d\n", hsotg->core_params->otg_ver);
- 
- 	/* Clear the SRP success bit for FS-I2c */
-@@ -498,16 +498,16 @@ void dwc2_enable_host_interrupts(struct
- 	dev_dbg(hsotg->dev, "%s()\n", __func__);
- 
- 	/* Disable all interrupts */
--	writel(0, hsotg->regs + GINTMSK);
--	writel(0, hsotg->regs + HAINTMSK);
-+	dwc2_writel(0, hsotg->regs + GINTMSK);
-+	dwc2_writel(0, hsotg->regs + HAINTMSK);
- 
- 	/* Enable the common interrupts */
- 	dwc2_enable_common_interrupts(hsotg);
- 
- 	/* Enable host mode interrupts without disturbing common interrupts */
--	intmsk = readl(hsotg->regs + GINTMSK);
-+	intmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 	intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT;
--	writel(intmsk, hsotg->regs + GINTMSK);
-+	dwc2_writel(intmsk, hsotg->regs + GINTMSK);
- }
- 
- /**
-@@ -517,12 +517,12 @@ void dwc2_enable_host_interrupts(struct
-  */
- void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg)
- {
--	u32 intmsk = readl(hsotg->regs + GINTMSK);
-+	u32 intmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 
- 	/* Disable host mode interrupts without disturbing common interrupts */
- 	intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT |
- 		    GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP);
--	writel(intmsk, hsotg->regs + GINTMSK);
-+	dwc2_writel(intmsk, hsotg->regs + GINTMSK);
- }
- 
- /*
-@@ -602,36 +602,36 @@ static void dwc2_config_fifos(struct dwc
- 	dwc2_calculate_dynamic_fifo(hsotg);
- 
- 	/* Rx FIFO */
--	grxfsiz = readl(hsotg->regs + GRXFSIZ);
-+	grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ);
- 	dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz);
- 	grxfsiz &= ~GRXFSIZ_DEPTH_MASK;
- 	grxfsiz |= params->host_rx_fifo_size <<
- 		   GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK;
--	writel(grxfsiz, hsotg->regs + GRXFSIZ);
--	dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", readl(hsotg->regs + GRXFSIZ));
-+	dwc2_writel(grxfsiz, hsotg->regs + GRXFSIZ);
-+	dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", dwc2_readl(hsotg->regs + GRXFSIZ));
- 
- 	/* Non-periodic Tx FIFO */
- 	dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n",
--		readl(hsotg->regs + GNPTXFSIZ));
-+		dwc2_readl(hsotg->regs + GNPTXFSIZ));
- 	nptxfsiz = params->host_nperio_tx_fifo_size <<
- 		   FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
- 	nptxfsiz |= params->host_rx_fifo_size <<
- 		    FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
--	writel(nptxfsiz, hsotg->regs + GNPTXFSIZ);
-+	dwc2_writel(nptxfsiz, hsotg->regs + GNPTXFSIZ);
- 	dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n",
--		readl(hsotg->regs + GNPTXFSIZ));
-+		dwc2_readl(hsotg->regs + GNPTXFSIZ));
- 
- 	/* Periodic Tx FIFO */
- 	dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n",
--		readl(hsotg->regs + HPTXFSIZ));
-+		dwc2_readl(hsotg->regs + HPTXFSIZ));
- 	hptxfsiz = params->host_perio_tx_fifo_size <<
- 		   FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
- 	hptxfsiz |= (params->host_rx_fifo_size +
- 		     params->host_nperio_tx_fifo_size) <<
- 		    FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
--	writel(hptxfsiz, hsotg->regs + HPTXFSIZ);
-+	dwc2_writel(hptxfsiz, hsotg->regs + HPTXFSIZ);
- 	dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n",
--		readl(hsotg->regs + HPTXFSIZ));
-+		dwc2_readl(hsotg->regs + HPTXFSIZ));
- 
- 	if (hsotg->core_params->en_multiple_tx_fifo > 0 &&
- 	    hsotg->hw_params.snpsid <= DWC2_CORE_REV_2_94a) {
-@@ -639,14 +639,14 @@ static void dwc2_config_fifos(struct dwc
- 		 * Global DFIFOCFG calculation for Host mode -
- 		 * include RxFIFO, NPTXFIFO and HPTXFIFO
- 		 */
--		dfifocfg = readl(hsotg->regs + GDFIFOCFG);
-+		dfifocfg = dwc2_readl(hsotg->regs + GDFIFOCFG);
- 		dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK;
- 		dfifocfg |= (params->host_rx_fifo_size +
- 			     params->host_nperio_tx_fifo_size +
- 			     params->host_perio_tx_fifo_size) <<
- 			    GDFIFOCFG_EPINFOBASE_SHIFT &
- 			    GDFIFOCFG_EPINFOBASE_MASK;
--		writel(dfifocfg, hsotg->regs + GDFIFOCFG);
-+		dwc2_writel(dfifocfg, hsotg->regs + GDFIFOCFG);
- 	}
- }
- 
-@@ -667,14 +667,14 @@ void dwc2_core_host_init(struct dwc2_hso
- 	dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
- 
- 	/* Restart the Phy Clock */
--	writel(0, hsotg->regs + PCGCTL);
-+	dwc2_writel(0, hsotg->regs + PCGCTL);
- 
- 	/* Initialize Host Configuration Register */
- 	dwc2_init_fs_ls_pclk_sel(hsotg);
- 	if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL) {
--		hcfg = readl(hsotg->regs + HCFG);
-+		hcfg = dwc2_readl(hsotg->regs + HCFG);
- 		hcfg |= HCFG_FSLSSUPP;
--		writel(hcfg, hsotg->regs + HCFG);
-+		dwc2_writel(hcfg, hsotg->regs + HCFG);
- 	}
- 
- 	/*
-@@ -683,9 +683,9 @@ void dwc2_core_host_init(struct dwc2_hso
- 	 * and its value must not be changed during runtime.
- 	 */
- 	if (hsotg->core_params->reload_ctl > 0) {
--		hfir = readl(hsotg->regs + HFIR);
-+		hfir = dwc2_readl(hsotg->regs + HFIR);
- 		hfir |= HFIR_RLDCTRL;
--		writel(hfir, hsotg->regs + HFIR);
-+		dwc2_writel(hfir, hsotg->regs + HFIR);
- 	}
- 
- 	if (hsotg->core_params->dma_desc_enable > 0) {
-@@ -701,9 +701,9 @@ void dwc2_core_host_init(struct dwc2_hso
- 				"falling back to buffer DMA mode.\n");
- 			hsotg->core_params->dma_desc_enable = 0;
- 		} else {
--			hcfg = readl(hsotg->regs + HCFG);
-+			hcfg = dwc2_readl(hsotg->regs + HCFG);
- 			hcfg |= HCFG_DESCDMA;
--			writel(hcfg, hsotg->regs + HCFG);
-+			dwc2_writel(hcfg, hsotg->regs + HCFG);
- 		}
- 	}
- 
-@@ -712,18 +712,18 @@ void dwc2_core_host_init(struct dwc2_hso
- 
- 	/* TODO - check this */
- 	/* Clear Host Set HNP Enable in the OTG Control Register */
--	otgctl = readl(hsotg->regs + GOTGCTL);
-+	otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 	otgctl &= ~GOTGCTL_HSTSETHNPEN;
--	writel(otgctl, hsotg->regs + GOTGCTL);
-+	dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
- 
- 	/* Make sure the FIFOs are flushed */
- 	dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */);
- 	dwc2_flush_rx_fifo(hsotg);
- 
- 	/* Clear Host Set HNP Enable in the OTG Control Register */
--	otgctl = readl(hsotg->regs + GOTGCTL);
-+	otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 	otgctl &= ~GOTGCTL_HSTSETHNPEN;
--	writel(otgctl, hsotg->regs + GOTGCTL);
-+	dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
- 
- 	if (hsotg->core_params->dma_desc_enable <= 0) {
- 		int num_channels, i;
-@@ -732,25 +732,25 @@ void dwc2_core_host_init(struct dwc2_hso
- 		/* Flush out any leftover queued requests */
- 		num_channels = hsotg->core_params->host_channels;
- 		for (i = 0; i < num_channels; i++) {
--			hcchar = readl(hsotg->regs + HCCHAR(i));
-+			hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- 			hcchar &= ~HCCHAR_CHENA;
- 			hcchar |= HCCHAR_CHDIS;
- 			hcchar &= ~HCCHAR_EPDIR;
--			writel(hcchar, hsotg->regs + HCCHAR(i));
-+			dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- 		}
- 
- 		/* Halt all channels to put them into a known state */
- 		for (i = 0; i < num_channels; i++) {
- 			int count = 0;
- 
--			hcchar = readl(hsotg->regs + HCCHAR(i));
-+			hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- 			hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
- 			hcchar &= ~HCCHAR_EPDIR;
--			writel(hcchar, hsotg->regs + HCCHAR(i));
-+			dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- 			dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
- 				__func__, i);
- 			do {
--				hcchar = readl(hsotg->regs + HCCHAR(i));
-+				hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- 				if (++count > 1000) {
- 					dev_err(hsotg->dev,
- 						"Unable to clear enable on channel %d\n",
-@@ -771,7 +771,7 @@ void dwc2_core_host_init(struct dwc2_hso
- 			!!(hprt0 & HPRT0_PWR));
- 		if (!(hprt0 & HPRT0_PWR)) {
- 			hprt0 |= HPRT0_PWR;
--			writel(hprt0, hsotg->regs + HPRT0);
-+			dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 		}
- 	}
- 
-@@ -851,7 +851,7 @@ static void dwc2_hc_enable_slave_ints(st
- 		break;
- 	}
- 
--	writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
-+	dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
- 	if (dbg_hc(chan))
- 		dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
- }
-@@ -888,7 +888,7 @@ static void dwc2_hc_enable_dma_ints(stru
- 		}
- 	}
- 
--	writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
-+	dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
- 	if (dbg_hc(chan))
- 		dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
- }
-@@ -909,16 +909,16 @@ static void dwc2_hc_enable_ints(struct d
- 	}
- 
- 	/* Enable the top level host channel interrupt */
--	intmsk = readl(hsotg->regs + HAINTMSK);
-+	intmsk = dwc2_readl(hsotg->regs + HAINTMSK);
- 	intmsk |= 1 << chan->hc_num;
--	writel(intmsk, hsotg->regs + HAINTMSK);
-+	dwc2_writel(intmsk, hsotg->regs + HAINTMSK);
- 	if (dbg_hc(chan))
- 		dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk);
- 
- 	/* Make sure host channel interrupts are enabled */
--	intmsk = readl(hsotg->regs + GINTMSK);
-+	intmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 	intmsk |= GINTSTS_HCHINT;
--	writel(intmsk, hsotg->regs + GINTMSK);
-+	dwc2_writel(intmsk, hsotg->regs + GINTMSK);
- 	if (dbg_hc(chan))
- 		dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk);
- }
-@@ -947,7 +947,7 @@ void dwc2_hc_init(struct dwc2_hsotg *hso
- 	/* Clear old interrupt conditions for this host channel */
- 	hcintmsk = 0xffffffff;
- 	hcintmsk &= ~HCINTMSK_RESERVED14_31;
--	writel(hcintmsk, hsotg->regs + HCINT(hc_num));
-+	dwc2_writel(hcintmsk, hsotg->regs + HCINT(hc_num));
- 
- 	/* Enable channel interrupts required for this transfer */
- 	dwc2_hc_enable_ints(hsotg, chan);
-@@ -964,7 +964,7 @@ void dwc2_hc_init(struct dwc2_hsotg *hso
- 		hcchar |= HCCHAR_LSPDDEV;
- 	hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK;
- 	hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK;
--	writel(hcchar, hsotg->regs + HCCHAR(hc_num));
-+	dwc2_writel(hcchar, hsotg->regs + HCCHAR(hc_num));
- 	if (dbg_hc(chan)) {
- 		dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n",
- 			 hc_num, hcchar);
-@@ -1018,7 +1018,7 @@ void dwc2_hc_init(struct dwc2_hsotg *hso
- 		}
- 	}
- 
--	writel(hcsplt, hsotg->regs + HCSPLT(hc_num));
-+	dwc2_writel(hcsplt, hsotg->regs + HCSPLT(hc_num));
- }
- 
- /**
-@@ -1070,14 +1070,14 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- 		u32 hcintmsk = HCINTMSK_CHHLTD;
- 
- 		dev_vdbg(hsotg->dev, "dequeue/error\n");
--		writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
-+		dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
- 
- 		/*
- 		 * Make sure no other interrupts besides halt are currently
- 		 * pending. Handling another interrupt could cause a crash due
- 		 * to the QTD and QH state.
- 		 */
--		writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num));
-+		dwc2_writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num));
- 
- 		/*
- 		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
-@@ -1086,7 +1086,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- 		 */
- 		chan->halt_status = halt_status;
- 
--		hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+		hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- 		if (!(hcchar & HCCHAR_CHENA)) {
- 			/*
- 			 * The channel is either already halted or it hasn't
-@@ -1114,7 +1114,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- 		return;
- 	}
- 
--	hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+	hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- 
- 	/* No need to set the bit in DDMA for disabling the channel */
- 	/* TODO check it everywhere channel is disabled */
-@@ -1137,7 +1137,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- 		if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
- 		    chan->ep_type == USB_ENDPOINT_XFER_BULK) {
- 			dev_vdbg(hsotg->dev, "control/bulk\n");
--			nptxsts = readl(hsotg->regs + GNPTXSTS);
-+			nptxsts = dwc2_readl(hsotg->regs + GNPTXSTS);
- 			if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) {
- 				dev_vdbg(hsotg->dev, "Disabling channel\n");
- 				hcchar &= ~HCCHAR_CHENA;
-@@ -1145,7 +1145,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- 		} else {
- 			if (dbg_perio())
- 				dev_vdbg(hsotg->dev, "isoc/intr\n");
--			hptxsts = readl(hsotg->regs + HPTXSTS);
-+			hptxsts = dwc2_readl(hsotg->regs + HPTXSTS);
- 			if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 ||
- 			    hsotg->queuing_high_bandwidth) {
- 				if (dbg_perio())
-@@ -1158,7 +1158,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- 			dev_vdbg(hsotg->dev, "DMA enabled\n");
- 	}
- 
--	writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
-+	dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- 	chan->halt_status = halt_status;
- 
- 	if (hcchar & HCCHAR_CHENA) {
-@@ -1205,10 +1205,10 @@ void dwc2_hc_cleanup(struct dwc2_hsotg *
- 	 * Clear channel interrupt enables and any unhandled channel interrupt
- 	 * conditions
- 	 */
--	writel(0, hsotg->regs + HCINTMSK(chan->hc_num));
-+	dwc2_writel(0, hsotg->regs + HCINTMSK(chan->hc_num));
- 	hcintmsk = 0xffffffff;
- 	hcintmsk &= ~HCINTMSK_RESERVED14_31;
--	writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num));
-+	dwc2_writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num));
- }
- 
- /**
-@@ -1294,13 +1294,13 @@ static void dwc2_hc_write_packet(struct
- 	if (((unsigned long)data_buf & 0x3) == 0) {
- 		/* xfer_buf is DWORD aligned */
- 		for (i = 0; i < dword_count; i++, data_buf++)
--			writel(*data_buf, data_fifo);
-+			dwc2_writel(*data_buf, data_fifo);
- 	} else {
- 		/* xfer_buf is not DWORD aligned */
- 		for (i = 0; i < dword_count; i++, data_buf++) {
- 			u32 data = data_buf[0] | data_buf[1] << 8 |
- 				   data_buf[2] << 16 | data_buf[3] << 24;
--			writel(data, data_fifo);
-+			dwc2_writel(data, data_fifo);
- 		}
- 	}
- 
-@@ -1453,7 +1453,7 @@ void dwc2_hc_start_transfer(struct dwc2_
- 	hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK;
- 	hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
- 		  TSIZ_SC_MC_PID_MASK;
--	writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
-+	dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
- 	if (dbg_hc(chan)) {
- 		dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n",
- 			 hctsiz, chan->hc_num);
-@@ -1481,7 +1481,7 @@ void dwc2_hc_start_transfer(struct dwc2_
- 		} else {
- 			dma_addr = chan->xfer_dma;
- 		}
--		writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num));
-+		dwc2_writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num));
- 		if (dbg_hc(chan))
- 			dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n",
- 				 (unsigned long)dma_addr, chan->hc_num);
-@@ -1489,13 +1489,13 @@ void dwc2_hc_start_transfer(struct dwc2_
- 
- 	/* Start the split */
- 	if (chan->do_split) {
--		u32 hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num));
-+		u32 hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chan->hc_num));
- 
- 		hcsplt |= HCSPLT_SPLTENA;
--		writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num));
-+		dwc2_writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num));
- 	}
- 
--	hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+	hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- 	hcchar &= ~HCCHAR_MULTICNT_MASK;
- 	hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
- 		  HCCHAR_MULTICNT_MASK;
-@@ -1515,7 +1515,7 @@ void dwc2_hc_start_transfer(struct dwc2_
- 			 (hcchar & HCCHAR_MULTICNT_MASK) >>
- 			 HCCHAR_MULTICNT_SHIFT);
- 
--	writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
-+	dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- 	if (dbg_hc(chan))
- 		dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
- 			 chan->hc_num);
-@@ -1574,18 +1574,18 @@ void dwc2_hc_start_transfer_ddma(struct
- 		dev_vdbg(hsotg->dev, "	 NTD: %d\n", chan->ntd - 1);
- 	}
- 
--	writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
-+	dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
- 
- 	hc_dma = (u32)chan->desc_list_addr & HCDMA_DMA_ADDR_MASK;
- 
- 	/* Always start from first descriptor */
- 	hc_dma &= ~HCDMA_CTD_MASK;
--	writel(hc_dma, hsotg->regs + HCDMA(chan->hc_num));
-+	dwc2_writel(hc_dma, hsotg->regs + HCDMA(chan->hc_num));
- 	if (dbg_hc(chan))
- 		dev_vdbg(hsotg->dev, "Wrote %08x to HCDMA(%d)\n",
- 			 hc_dma, chan->hc_num);
- 
--	hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+	hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- 	hcchar &= ~HCCHAR_MULTICNT_MASK;
- 	hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
- 		  HCCHAR_MULTICNT_MASK;
-@@ -1604,7 +1604,7 @@ void dwc2_hc_start_transfer_ddma(struct
- 			 (hcchar & HCCHAR_MULTICNT_MASK) >>
- 			 HCCHAR_MULTICNT_SHIFT);
- 
--	writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
-+	dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- 	if (dbg_hc(chan))
- 		dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
- 			 chan->hc_num);
-@@ -1661,7 +1661,7 @@ int dwc2_hc_continue_transfer(struct dwc
- 		 * transfer completes, the extra requests for the channel will
- 		 * be flushed.
- 		 */
--		u32 hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+		u32 hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- 
- 		dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
- 		hcchar |= HCCHAR_CHENA;
-@@ -1669,7 +1669,7 @@ int dwc2_hc_continue_transfer(struct dwc
- 		if (dbg_hc(chan))
- 			dev_vdbg(hsotg->dev, "	 IN xfer: hcchar = 0x%08x\n",
- 				 hcchar);
--		writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
-+		dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- 		chan->requests++;
- 		return 1;
- 	}
-@@ -1679,7 +1679,7 @@ int dwc2_hc_continue_transfer(struct dwc
- 	if (chan->xfer_count < chan->xfer_len) {
- 		if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- 		    chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
--			u32 hcchar = readl(hsotg->regs +
-+			u32 hcchar = dwc2_readl(hsotg->regs +
- 					   HCCHAR(chan->hc_num));
- 
- 			dwc2_hc_set_even_odd_frame(hsotg, chan,
-@@ -1716,12 +1716,12 @@ void dwc2_hc_do_ping(struct dwc2_hsotg *
- 
- 	hctsiz = TSIZ_DOPNG;
- 	hctsiz |= 1 << TSIZ_PKTCNT_SHIFT;
--	writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
-+	dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
- 
--	hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+	hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- 	hcchar |= HCCHAR_CHENA;
- 	hcchar &= ~HCCHAR_CHDIS;
--	writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
-+	dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- }
- 
- /**
-@@ -1740,8 +1740,8 @@ u32 dwc2_calc_frame_interval(struct dwc2
- 	u32 hprt0;
- 	int clock = 60;	/* default value */
- 
--	usbcfg = readl(hsotg->regs + GUSBCFG);
--	hprt0 = readl(hsotg->regs + HPRT0);
-+	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-+	hprt0 = dwc2_readl(hsotg->regs + HPRT0);
- 
- 	if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) &&
- 	    !(usbcfg & GUSBCFG_PHYIF16))
-@@ -1797,7 +1797,7 @@ void dwc2_read_packet(struct dwc2_hsotg
- 	dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes);
- 
- 	for (i = 0; i < word_count; i++, data_buf++)
--		*data_buf = readl(fifo);
-+		*data_buf = dwc2_readl(fifo);
- }
- 
- /**
-@@ -1817,56 +1817,56 @@ void dwc2_dump_host_registers(struct dwc
- 	dev_dbg(hsotg->dev, "Host Global Registers\n");
- 	addr = hsotg->regs + HCFG;
- 	dev_dbg(hsotg->dev, "HCFG	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + HFIR;
- 	dev_dbg(hsotg->dev, "HFIR	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + HFNUM;
- 	dev_dbg(hsotg->dev, "HFNUM	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + HPTXSTS;
- 	dev_dbg(hsotg->dev, "HPTXSTS	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + HAINT;
- 	dev_dbg(hsotg->dev, "HAINT	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + HAINTMSK;
- 	dev_dbg(hsotg->dev, "HAINTMSK	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	if (hsotg->core_params->dma_desc_enable > 0) {
- 		addr = hsotg->regs + HFLBADDR;
- 		dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n",
--			(unsigned long)addr, readl(addr));
-+			(unsigned long)addr, dwc2_readl(addr));
- 	}
- 
- 	addr = hsotg->regs + HPRT0;
- 	dev_dbg(hsotg->dev, "HPRT0	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 
- 	for (i = 0; i < hsotg->core_params->host_channels; i++) {
- 		dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i);
- 		addr = hsotg->regs + HCCHAR(i);
- 		dev_dbg(hsotg->dev, "HCCHAR	 @0x%08lX : 0x%08X\n",
--			(unsigned long)addr, readl(addr));
-+			(unsigned long)addr, dwc2_readl(addr));
- 		addr = hsotg->regs + HCSPLT(i);
- 		dev_dbg(hsotg->dev, "HCSPLT	 @0x%08lX : 0x%08X\n",
--			(unsigned long)addr, readl(addr));
-+			(unsigned long)addr, dwc2_readl(addr));
- 		addr = hsotg->regs + HCINT(i);
- 		dev_dbg(hsotg->dev, "HCINT	 @0x%08lX : 0x%08X\n",
--			(unsigned long)addr, readl(addr));
-+			(unsigned long)addr, dwc2_readl(addr));
- 		addr = hsotg->regs + HCINTMSK(i);
- 		dev_dbg(hsotg->dev, "HCINTMSK	 @0x%08lX : 0x%08X\n",
--			(unsigned long)addr, readl(addr));
-+			(unsigned long)addr, dwc2_readl(addr));
- 		addr = hsotg->regs + HCTSIZ(i);
- 		dev_dbg(hsotg->dev, "HCTSIZ	 @0x%08lX : 0x%08X\n",
--			(unsigned long)addr, readl(addr));
-+			(unsigned long)addr, dwc2_readl(addr));
- 		addr = hsotg->regs + HCDMA(i);
- 		dev_dbg(hsotg->dev, "HCDMA	 @0x%08lX : 0x%08X\n",
--			(unsigned long)addr, readl(addr));
-+			(unsigned long)addr, dwc2_readl(addr));
- 		if (hsotg->core_params->dma_desc_enable > 0) {
- 			addr = hsotg->regs + HCDMAB(i);
- 			dev_dbg(hsotg->dev, "HCDMAB	 @0x%08lX : 0x%08X\n",
--				(unsigned long)addr, readl(addr));
-+				(unsigned long)addr, dwc2_readl(addr));
- 		}
- 	}
- #endif
-@@ -1888,80 +1888,80 @@ void dwc2_dump_global_registers(struct d
- 	dev_dbg(hsotg->dev, "Core Global Registers\n");
- 	addr = hsotg->regs + GOTGCTL;
- 	dev_dbg(hsotg->dev, "GOTGCTL	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GOTGINT;
- 	dev_dbg(hsotg->dev, "GOTGINT	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GAHBCFG;
- 	dev_dbg(hsotg->dev, "GAHBCFG	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GUSBCFG;
- 	dev_dbg(hsotg->dev, "GUSBCFG	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GRSTCTL;
- 	dev_dbg(hsotg->dev, "GRSTCTL	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GINTSTS;
- 	dev_dbg(hsotg->dev, "GINTSTS	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GINTMSK;
- 	dev_dbg(hsotg->dev, "GINTMSK	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GRXSTSR;
- 	dev_dbg(hsotg->dev, "GRXSTSR	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GRXFSIZ;
- 	dev_dbg(hsotg->dev, "GRXFSIZ	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GNPTXFSIZ;
- 	dev_dbg(hsotg->dev, "GNPTXFSIZ	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GNPTXSTS;
- 	dev_dbg(hsotg->dev, "GNPTXSTS	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GI2CCTL;
- 	dev_dbg(hsotg->dev, "GI2CCTL	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GPVNDCTL;
- 	dev_dbg(hsotg->dev, "GPVNDCTL	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GGPIO;
- 	dev_dbg(hsotg->dev, "GGPIO	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GUID;
- 	dev_dbg(hsotg->dev, "GUID	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GSNPSID;
- 	dev_dbg(hsotg->dev, "GSNPSID	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GHWCFG1;
- 	dev_dbg(hsotg->dev, "GHWCFG1	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GHWCFG2;
- 	dev_dbg(hsotg->dev, "GHWCFG2	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GHWCFG3;
- 	dev_dbg(hsotg->dev, "GHWCFG3	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GHWCFG4;
- 	dev_dbg(hsotg->dev, "GHWCFG4	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GLPMCFG;
- 	dev_dbg(hsotg->dev, "GLPMCFG	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GPWRDN;
- 	dev_dbg(hsotg->dev, "GPWRDN	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + GDFIFOCFG;
- 	dev_dbg(hsotg->dev, "GDFIFOCFG	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 	addr = hsotg->regs + HPTXFSIZ;
- 	dev_dbg(hsotg->dev, "HPTXFSIZ	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- 
- 	addr = hsotg->regs + PCGCTL;
- 	dev_dbg(hsotg->dev, "PCGCTL	 @0x%08lX : 0x%08X\n",
--		(unsigned long)addr, readl(addr));
-+		(unsigned long)addr, dwc2_readl(addr));
- #endif
- }
- 
-@@ -1980,15 +1980,15 @@ void dwc2_flush_tx_fifo(struct dwc2_hsot
- 
- 	greset = GRSTCTL_TXFFLSH;
- 	greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK;
--	writel(greset, hsotg->regs + GRSTCTL);
-+	dwc2_writel(greset, hsotg->regs + GRSTCTL);
- 
- 	do {
--		greset = readl(hsotg->regs + GRSTCTL);
-+		greset = dwc2_readl(hsotg->regs + GRSTCTL);
- 		if (++count > 10000) {
- 			dev_warn(hsotg->dev,
- 				 "%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
- 				 __func__, greset,
--				 readl(hsotg->regs + GNPTXSTS));
-+				 dwc2_readl(hsotg->regs + GNPTXSTS));
- 			break;
- 		}
- 		udelay(1);
-@@ -2011,10 +2011,10 @@ void dwc2_flush_rx_fifo(struct dwc2_hsot
- 	dev_vdbg(hsotg->dev, "%s()\n", __func__);
- 
- 	greset = GRSTCTL_RXFFLSH;
--	writel(greset, hsotg->regs + GRSTCTL);
-+	dwc2_writel(greset, hsotg->regs + GRSTCTL);
- 
- 	do {
--		greset = readl(hsotg->regs + GRSTCTL);
-+		greset = dwc2_readl(hsotg->regs + GRSTCTL);
- 		if (++count > 10000) {
- 			dev_warn(hsotg->dev, "%s() HANG! GRSTCTL=%0x\n",
- 				 __func__, greset);
-@@ -2676,7 +2676,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg
- 	 * 0x45f42xxx or 0x45f43xxx, which corresponds to either "OT2" or "OT3",
- 	 * as in "OTG version 2.xx" or "OTG version 3.xx".
- 	 */
--	hw->snpsid = readl(hsotg->regs + GSNPSID);
-+	hw->snpsid = dwc2_readl(hsotg->regs + GSNPSID);
- 	if ((hw->snpsid & 0xfffff000) != 0x4f542000 &&
- 	    (hw->snpsid & 0xfffff000) != 0x4f543000) {
- 		dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
-@@ -2688,11 +2688,11 @@ int dwc2_get_hwparams(struct dwc2_hsotg
- 		hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
- 		hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
- 
--	hwcfg1 = readl(hsotg->regs + GHWCFG1);
--	hwcfg2 = readl(hsotg->regs + GHWCFG2);
--	hwcfg3 = readl(hsotg->regs + GHWCFG3);
--	hwcfg4 = readl(hsotg->regs + GHWCFG4);
--	grxfsiz = readl(hsotg->regs + GRXFSIZ);
-+	hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1);
-+	hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
-+	hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3);
-+	hwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4);
-+	grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ);
- 
- 	dev_dbg(hsotg->dev, "hwcfg1=%08x\n", hwcfg1);
- 	dev_dbg(hsotg->dev, "hwcfg2=%08x\n", hwcfg2);
-@@ -2701,18 +2701,18 @@ int dwc2_get_hwparams(struct dwc2_hsotg
- 	dev_dbg(hsotg->dev, "grxfsiz=%08x\n", grxfsiz);
- 
- 	/* Force host mode to get HPTXFSIZ / GNPTXFSIZ exact power on value */
--	gusbcfg = readl(hsotg->regs + GUSBCFG);
-+	gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 	gusbcfg |= GUSBCFG_FORCEHOSTMODE;
--	writel(gusbcfg, hsotg->regs + GUSBCFG);
-+	dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- 	usleep_range(100000, 150000);
- 
--	gnptxfsiz = readl(hsotg->regs + GNPTXFSIZ);
--	hptxfsiz = readl(hsotg->regs + HPTXFSIZ);
-+	gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
-+	hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ);
- 	dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
- 	dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz);
--	gusbcfg = readl(hsotg->regs + GUSBCFG);
-+	gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 	gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
--	writel(gusbcfg, hsotg->regs + GUSBCFG);
-+	dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- 	usleep_range(100000, 150000);
- 
- 	/* hwcfg2 */
-@@ -2831,7 +2831,7 @@ u16 dwc2_get_otg_version(struct dwc2_hso
- 
- bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
- {
--	if (readl(hsotg->regs + GSNPSID) == 0xffffffff)
-+	if (dwc2_readl(hsotg->regs + GSNPSID) == 0xffffffff)
- 		return false;
- 	else
- 		return true;
-@@ -2845,10 +2845,10 @@ bool dwc2_is_controller_alive(struct dwc
-  */
- void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg)
- {
--	u32 ahbcfg = readl(hsotg->regs + GAHBCFG);
-+	u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
- 
- 	ahbcfg |= GAHBCFG_GLBL_INTR_EN;
--	writel(ahbcfg, hsotg->regs + GAHBCFG);
-+	dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
- }
- 
- /**
-@@ -2859,10 +2859,10 @@ void dwc2_enable_global_interrupts(struc
-  */
- void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg)
- {
--	u32 ahbcfg = readl(hsotg->regs + GAHBCFG);
-+	u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
- 
- 	ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
--	writel(ahbcfg, hsotg->regs + GAHBCFG);
-+	dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
- }
- 
- MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
---- a/drivers/usb/dwc2/core.h
-+++ b/drivers/usb/dwc2/core.h
-@@ -44,16 +44,28 @@
- #include <linux/usb/phy.h>
- #include "hw.h"
- 
--#ifdef DWC2_LOG_WRITES
--static inline void do_write(u32 value, void *addr)
-+static inline u32 dwc2_readl(const void __iomem *addr)
- {
--	writel(value, addr);
--	pr_info("INFO:: wrote %08x to %p\n", value, addr);
-+	u32 value = __raw_readl(addr);
-+
-+	/* In order to preserve endianness __raw_* operation is used. Therefore
-+	   a barrier is needed to ensure IO access is not re-ordered across
-+	   reads or writes */
-+	mb();
-+	return value;
- }
- 
--#undef writel
--#define writel(v, a)	do_write(v, a)
-+static inline void dwc2_writel(u32 value, void __iomem *addr)
-+{
-+	__raw_writel(value, addr);
-+	/* In order to preserve endianness __raw_* operation is used. Therefore
-+	   a barrier is needed to ensure IO access is not re-ordered across
-+	   reads or writes */
-+	mb();
-+#ifdef DWC2_LOG_WRITES
-+	pr_info("INFO:: wrote %08x to %p\n", value, addr);
- #endif
-+}
- 
- /* Maximum number of Endpoints/HostChannels */
- #define MAX_EPS_CHANNELS	16
---- a/drivers/usb/dwc2/core_intr.c
-+++ b/drivers/usb/dwc2/core_intr.c
-@@ -80,15 +80,15 @@ static const char *dwc2_op_state_str(str
-  */
- static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
- {
--	u32 hprt0 = readl(hsotg->regs + HPRT0);
-+	u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
- 
- 	if (hprt0 & HPRT0_ENACHG) {
- 		hprt0 &= ~HPRT0_ENA;
--		writel(hprt0, hsotg->regs + HPRT0);
-+		dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 	}
- 
- 	/* Clear interrupt */
--	writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
-+	dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
- }
- 
- /**
-@@ -102,7 +102,7 @@ static void dwc2_handle_mode_mismatch_in
- 		 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
- 
- 	/* Clear interrupt */
--	writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
-+	dwc2_writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
- }
- 
- /**
-@@ -117,8 +117,8 @@ static void dwc2_handle_otg_intr(struct
- 	u32 gotgctl;
- 	u32 gintmsk;
- 
--	gotgint = readl(hsotg->regs + GOTGINT);
--	gotgctl = readl(hsotg->regs + GOTGCTL);
-+	gotgint = dwc2_readl(hsotg->regs + GOTGINT);
-+	gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 	dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint,
- 		dwc2_op_state_str(hsotg));
- 
-@@ -126,7 +126,7 @@ static void dwc2_handle_otg_intr(struct
- 		dev_dbg(hsotg->dev,
- 			" ++OTG Interrupt: Session End Detected++ (%s)\n",
- 			dwc2_op_state_str(hsotg));
--		gotgctl = readl(hsotg->regs + GOTGCTL);
-+		gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 
- 		if (hsotg->op_state == OTG_STATE_B_HOST) {
- 			hsotg->op_state = OTG_STATE_B_PERIPHERAL;
-@@ -149,15 +149,15 @@ static void dwc2_handle_otg_intr(struct
- 			hsotg->lx_state = DWC2_L0;
- 		}
- 
--		gotgctl = readl(hsotg->regs + GOTGCTL);
-+		gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 		gotgctl &= ~GOTGCTL_DEVHNPEN;
--		writel(gotgctl, hsotg->regs + GOTGCTL);
-+		dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
- 	}
- 
- 	if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) {
- 		dev_dbg(hsotg->dev,
- 			" ++OTG Interrupt: Session Request Success Status Change++\n");
--		gotgctl = readl(hsotg->regs + GOTGCTL);
-+		gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 		if (gotgctl & GOTGCTL_SESREQSCS) {
- 			if (hsotg->core_params->phy_type ==
- 					DWC2_PHY_TYPE_PARAM_FS
-@@ -165,9 +165,9 @@ static void dwc2_handle_otg_intr(struct
- 				hsotg->srp_success = 1;
- 			} else {
- 				/* Clear Session Request */
--				gotgctl = readl(hsotg->regs + GOTGCTL);
-+				gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 				gotgctl &= ~GOTGCTL_SESREQ;
--				writel(gotgctl, hsotg->regs + GOTGCTL);
-+				dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
- 			}
- 		}
- 	}
-@@ -177,7 +177,7 @@ static void dwc2_handle_otg_intr(struct
- 		 * Print statements during the HNP interrupt handling
- 		 * can cause it to fail
- 		 */
--		gotgctl = readl(hsotg->regs + GOTGCTL);
-+		gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 		/*
- 		 * WA for 3.00a- HW is not setting cur_mode, even sometimes
- 		 * this does not help
-@@ -197,9 +197,9 @@ static void dwc2_handle_otg_intr(struct
- 				 * interrupt does not get handled and Linux
- 				 * complains loudly.
- 				 */
--				gintmsk = readl(hsotg->regs + GINTMSK);
-+				gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 				gintmsk &= ~GINTSTS_SOF;
--				writel(gintmsk, hsotg->regs + GINTMSK);
-+				dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- 
- 				/*
- 				 * Call callback function with spin lock
-@@ -213,9 +213,9 @@ static void dwc2_handle_otg_intr(struct
- 				hsotg->op_state = OTG_STATE_B_HOST;
- 			}
- 		} else {
--			gotgctl = readl(hsotg->regs + GOTGCTL);
-+			gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 			gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN);
--			writel(gotgctl, hsotg->regs + GOTGCTL);
-+			dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
- 			dev_dbg(hsotg->dev, "HNP Failed\n");
- 			dev_err(hsotg->dev,
- 				"Device Not Connected/Responding\n");
-@@ -241,9 +241,9 @@ static void dwc2_handle_otg_intr(struct
- 			hsotg->op_state = OTG_STATE_A_PERIPHERAL;
- 		} else {
- 			/* Need to disable SOF interrupt immediately */
--			gintmsk = readl(hsotg->regs + GINTMSK);
-+			gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 			gintmsk &= ~GINTSTS_SOF;
--			writel(gintmsk, hsotg->regs + GINTMSK);
-+			dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- 			spin_unlock(&hsotg->lock);
- 			dwc2_hcd_start(hsotg);
- 			spin_lock(&hsotg->lock);
-@@ -258,7 +258,7 @@ static void dwc2_handle_otg_intr(struct
- 		dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n");
- 
- 	/* Clear GOTGINT */
--	writel(gotgint, hsotg->regs + GOTGINT);
-+	dwc2_writel(gotgint, hsotg->regs + GOTGINT);
- }
- 
- /**
-@@ -273,11 +273,11 @@ static void dwc2_handle_otg_intr(struct
-  */
- static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
- {
--	u32 gintmsk = readl(hsotg->regs + GINTMSK);
-+	u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 
- 	/* Need to disable SOF interrupt immediately */
- 	gintmsk &= ~GINTSTS_SOF;
--	writel(gintmsk, hsotg->regs + GINTMSK);
-+	dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- 
- 	dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++  (%s)\n",
- 		dwc2_is_host_mode(hsotg) ? "Host" : "Device");
-@@ -292,7 +292,7 @@ static void dwc2_handle_conn_id_status_c
- 	spin_lock(&hsotg->lock);
- 
- 	/* Clear interrupt */
--	writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
-+	dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
- }
- 
- /**
-@@ -311,7 +311,7 @@ static void dwc2_handle_session_req_intr
- 	dev_dbg(hsotg->dev, "++Session Request Interrupt++\n");
- 
- 	/* Clear interrupt */
--	writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
-+	dwc2_writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
- }
- 
- /*
-@@ -327,23 +327,23 @@ static void dwc2_handle_wakeup_detected_
- 	dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
- 
- 	if (dwc2_is_device_mode(hsotg)) {
--		dev_dbg(hsotg->dev, "DSTS=0x%0x\n", readl(hsotg->regs + DSTS));
-+		dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dwc2_readl(hsotg->regs + DSTS));
- 		if (hsotg->lx_state == DWC2_L2) {
--			u32 dctl = readl(hsotg->regs + DCTL);
-+			u32 dctl = dwc2_readl(hsotg->regs + DCTL);
- 
- 			/* Clear Remote Wakeup Signaling */
- 			dctl &= ~DCTL_RMTWKUPSIG;
--			writel(dctl, hsotg->regs + DCTL);
-+			dwc2_writel(dctl, hsotg->regs + DCTL);
- 		}
- 		/* Change to L0 state */
- 		hsotg->lx_state = DWC2_L0;
- 	} else {
- 		if (hsotg->lx_state != DWC2_L1) {
--			u32 pcgcctl = readl(hsotg->regs + PCGCTL);
-+			u32 pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
- 
- 			/* Restart the Phy Clock */
- 			pcgcctl &= ~PCGCTL_STOPPCLK;
--			writel(pcgcctl, hsotg->regs + PCGCTL);
-+			dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
- 			mod_timer(&hsotg->wkp_timer,
- 				  jiffies + msecs_to_jiffies(71));
- 		} else {
-@@ -353,7 +353,7 @@ static void dwc2_handle_wakeup_detected_
- 	}
- 
- 	/* Clear interrupt */
--	writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
-+	dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
- }
- 
- /*
-@@ -369,7 +369,7 @@ static void dwc2_handle_disconnect_intr(
- 	/* Change to L3 (OFF) state */
- 	hsotg->lx_state = DWC2_L3;
- 
--	writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
-+	dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
- }
- 
- /*
-@@ -391,7 +391,7 @@ static void dwc2_handle_usb_suspend_intr
- 		 * Check the Device status register to determine if the Suspend
- 		 * state is active
- 		 */
--		dsts = readl(hsotg->regs + DSTS);
-+		dsts = dwc2_readl(hsotg->regs + DSTS);
- 		dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dsts);
- 		dev_dbg(hsotg->dev,
- 			"DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n",
-@@ -413,7 +413,7 @@ static void dwc2_handle_usb_suspend_intr
- 	hsotg->lx_state = DWC2_L2;
- 
- 	/* Clear interrupt */
--	writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
-+	dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
- }
- 
- #define GINTMSK_COMMON	(GINTSTS_WKUPINT | GINTSTS_SESSREQINT |		\
-@@ -431,9 +431,9 @@ static u32 dwc2_read_common_intr(struct
- 	u32 gahbcfg;
- 	u32 gintmsk_common = GINTMSK_COMMON;
- 
--	gintsts = readl(hsotg->regs + GINTSTS);
--	gintmsk = readl(hsotg->regs + GINTMSK);
--	gahbcfg = readl(hsotg->regs + GAHBCFG);
-+	gintsts = dwc2_readl(hsotg->regs + GINTSTS);
-+	gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
-+	gahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
- 
- 	/* If any common interrupts set */
- 	if (gintsts & gintmsk_common)
---- a/drivers/usb/dwc2/gadget.c
-+++ b/drivers/usb/dwc2/gadget.c
-@@ -55,12 +55,12 @@ static inline struct s3c_hsotg *to_hsotg
- 
- static inline void __orr32(void __iomem *ptr, u32 val)
- {
--	writel(readl(ptr) | val, ptr);
-+	dwc2_writel(dwc2_readl(ptr) | val, ptr);
- }
- 
- static inline void __bic32(void __iomem *ptr, u32 val)
- {
--	writel(readl(ptr) & ~val, ptr);
-+	dwc2_writel(dwc2_readl(ptr) & ~val, ptr);
- }
- 
- /* forward decleration of functions */
-@@ -97,14 +97,14 @@ static inline bool using_dma(struct s3c_
-  */
- static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
- {
--	u32 gsintmsk = readl(hsotg->regs + GINTMSK);
-+	u32 gsintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 	u32 new_gsintmsk;
- 
- 	new_gsintmsk = gsintmsk | ints;
- 
- 	if (new_gsintmsk != gsintmsk) {
- 		dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk);
--		writel(new_gsintmsk, hsotg->regs + GINTMSK);
-+		dwc2_writel(new_gsintmsk, hsotg->regs + GINTMSK);
- 	}
- }
- 
-@@ -115,13 +115,13 @@ static void s3c_hsotg_en_gsint(struct s3
-  */
- static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints)
- {
--	u32 gsintmsk = readl(hsotg->regs + GINTMSK);
-+	u32 gsintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 	u32 new_gsintmsk;
- 
- 	new_gsintmsk = gsintmsk & ~ints;
- 
- 	if (new_gsintmsk != gsintmsk)
--		writel(new_gsintmsk, hsotg->regs + GINTMSK);
-+		dwc2_writel(new_gsintmsk, hsotg->regs + GINTMSK);
- }
- 
- /**
-@@ -146,12 +146,12 @@ static void s3c_hsotg_ctrl_epint(struct
- 		bit <<= 16;
- 
- 	local_irq_save(flags);
--	daint = readl(hsotg->regs + DAINTMSK);
-+	daint = dwc2_readl(hsotg->regs + DAINTMSK);
- 	if (en)
- 		daint |= bit;
- 	else
- 		daint &= ~bit;
--	writel(daint, hsotg->regs + DAINTMSK);
-+	dwc2_writel(daint, hsotg->regs + DAINTMSK);
- 	local_irq_restore(flags);
- }
- 
-@@ -169,8 +169,8 @@ static void s3c_hsotg_init_fifo(struct s
- 
- 	/* set FIFO sizes to 2048/1024 */
- 
--	writel(2048, hsotg->regs + GRXFSIZ);
--	writel((2048 << FIFOSIZE_STARTADDR_SHIFT) |
-+	dwc2_writel(2048, hsotg->regs + GRXFSIZ);
-+	dwc2_writel((2048 << FIFOSIZE_STARTADDR_SHIFT) |
- 		(1024 << FIFOSIZE_DEPTH_SHIFT), hsotg->regs + GNPTXFSIZ);
- 
- 	/*
-@@ -200,7 +200,7 @@ static void s3c_hsotg_init_fifo(struct s
- 			  "insufficient fifo memory");
- 		addr += size;
- 
--		writel(val, hsotg->regs + DPTXFSIZN(ep));
-+		dwc2_writel(val, hsotg->regs + DPTXFSIZN(ep));
- 	}
- 	/* 768*4=3072 bytes FIFO length */
- 	size = 768;
-@@ -211,7 +211,7 @@ static void s3c_hsotg_init_fifo(struct s
- 			  "insufficient fifo memory");
- 		addr += size;
- 
--		writel(val, hsotg->regs + DPTXFSIZN(ep));
-+		dwc2_writel(val, hsotg->regs + DPTXFSIZN(ep));
- 	}
- 
- 	/*
-@@ -219,13 +219,13 @@ static void s3c_hsotg_init_fifo(struct s
- 	 * all fifos are flushed before continuing
- 	 */
- 
--	writel(GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH |
-+	dwc2_writel(GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH |
- 	       GRSTCTL_RXFFLSH, hsotg->regs + GRSTCTL);
- 
- 	/* wait until the fifos are both flushed */
- 	timeout = 100;
- 	while (1) {
--		val = readl(hsotg->regs + GRSTCTL);
-+		val = dwc2_readl(hsotg->regs + GRSTCTL);
- 
- 		if ((val & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH)) == 0)
- 			break;
-@@ -317,7 +317,7 @@ static int s3c_hsotg_write_fifo(struct s
- 				struct s3c_hsotg_req *hs_req)
- {
- 	bool periodic = is_ep_periodic(hs_ep);
--	u32 gnptxsts = readl(hsotg->regs + GNPTXSTS);
-+	u32 gnptxsts = dwc2_readl(hsotg->regs + GNPTXSTS);
- 	int buf_pos = hs_req->req.actual;
- 	int to_write = hs_ep->size_loaded;
- 	void *data;
-@@ -332,7 +332,7 @@ static int s3c_hsotg_write_fifo(struct s
- 		return 0;
- 
- 	if (periodic && !hsotg->dedicated_fifos) {
--		u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
-+		u32 epsize = dwc2_readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
- 		int size_left;
- 		int size_done;
- 
-@@ -373,7 +373,7 @@ static int s3c_hsotg_write_fifo(struct s
- 			return -ENOSPC;
- 		}
- 	} else if (hsotg->dedicated_fifos && hs_ep->index != 0) {
--		can_write = readl(hsotg->regs + DTXFSTS(hs_ep->index));
-+		can_write = dwc2_readl(hsotg->regs + DTXFSTS(hs_ep->index));
- 
- 		can_write &= 0xffff;
- 		can_write *= 4;
-@@ -550,11 +550,11 @@ static void s3c_hsotg_start_req(struct s
- 	epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index);
- 
- 	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n",
--		__func__, readl(hsotg->regs + epctrl_reg), index,
-+		__func__, dwc2_readl(hsotg->regs + epctrl_reg), index,
- 		hs_ep->dir_in ? "in" : "out");
- 
- 	/* If endpoint is stalled, we will restart request later */
--	ctrl = readl(hsotg->regs + epctrl_reg);
-+	ctrl = dwc2_readl(hsotg->regs + epctrl_reg);
- 
- 	if (ctrl & DXEPCTL_STALL) {
- 		dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
-@@ -622,7 +622,7 @@ static void s3c_hsotg_start_req(struct s
- 	hs_ep->req = hs_req;
- 
- 	/* write size / packets */
--	writel(epsize, hsotg->regs + epsize_reg);
-+	dwc2_writel(epsize, hsotg->regs + epsize_reg);
- 
- 	if (using_dma(hsotg) && !continuing) {
- 		unsigned int dma_reg;
-@@ -633,7 +633,7 @@ static void s3c_hsotg_start_req(struct s
- 		 */
- 
- 		dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index);
--		writel(ureq->dma, hsotg->regs + dma_reg);
-+		dwc2_writel(ureq->dma, hsotg->regs + dma_reg);
- 
- 		dev_dbg(hsotg->dev, "%s: %pad => 0x%08x\n",
- 			__func__, &ureq->dma, dma_reg);
-@@ -652,7 +652,7 @@ static void s3c_hsotg_start_req(struct s
- 
- 
- 	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
--	writel(ctrl, hsotg->regs + epctrl_reg);
-+	dwc2_writel(ctrl, hsotg->regs + epctrl_reg);
- 
- 	/*
- 	 * set these, it seems that DMA support increments past the end
-@@ -674,7 +674,7 @@ static void s3c_hsotg_start_req(struct s
- 	 * to debugging to see what is going on.
- 	 */
- 	if (dir_in)
--		writel(DIEPMSK_INTKNTXFEMPMSK,
-+		dwc2_writel(DIEPMSK_INTKNTXFEMPMSK,
- 		       hsotg->regs + DIEPINT(index));
- 
- 	/*
-@@ -683,13 +683,13 @@ static void s3c_hsotg_start_req(struct s
- 	 */
- 
- 	/* check ep is enabled */
--	if (!(readl(hsotg->regs + epctrl_reg) & DXEPCTL_EPENA))
-+	if (!(dwc2_readl(hsotg->regs + epctrl_reg) & DXEPCTL_EPENA))
- 		dev_warn(hsotg->dev,
- 			 "ep%d: failed to become enabled (DXEPCTL=0x%08x)?\n",
--			 index, readl(hsotg->regs + epctrl_reg));
-+			 index, dwc2_readl(hsotg->regs + epctrl_reg));
- 
- 	dev_dbg(hsotg->dev, "%s: DXEPCTL=0x%08x\n",
--		__func__, readl(hsotg->regs + epctrl_reg));
-+		__func__, dwc2_readl(hsotg->regs + epctrl_reg));
- 
- 	/* enable ep interrupts */
- 	s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1);
-@@ -1051,14 +1051,14 @@ static void s3c_hsotg_stall_ep0(struct s
- 	 * taken effect, so no need to clear later.
- 	 */
- 
--	ctrl = readl(hsotg->regs + reg);
-+	ctrl = dwc2_readl(hsotg->regs + reg);
- 	ctrl |= DXEPCTL_STALL;
- 	ctrl |= DXEPCTL_CNAK;
--	writel(ctrl, hsotg->regs + reg);
-+	dwc2_writel(ctrl, hsotg->regs + reg);
- 
- 	dev_dbg(hsotg->dev,
- 		"written DXEPCTL=0x%08x to %08x (DXEPCTL=0x%08x)\n",
--		ctrl, reg, readl(hsotg->regs + reg));
-+		ctrl, reg, dwc2_readl(hsotg->regs + reg));
- 
- 	 /*
- 	  * complete won't be called, so we enqueue
-@@ -1108,11 +1108,11 @@ static void s3c_hsotg_process_control(st
- 		switch (ctrl->bRequest) {
- 		case USB_REQ_SET_ADDRESS:
- 			s3c_hsotg_disconnect(hsotg);
--			dcfg = readl(hsotg->regs + DCFG);
-+			dcfg = dwc2_readl(hsotg->regs + DCFG);
- 			dcfg &= ~DCFG_DEVADDR_MASK;
- 			dcfg |= (le16_to_cpu(ctrl->wValue) <<
- 				 DCFG_DEVADDR_SHIFT) & DCFG_DEVADDR_MASK;
--			writel(dcfg, hsotg->regs + DCFG);
-+			dwc2_writel(dcfg, hsotg->regs + DCFG);
- 
- 			dev_info(hsotg->dev, "new address %d\n", ctrl->wValue);
- 
-@@ -1302,7 +1302,7 @@ static void s3c_hsotg_rx_data(struct s3c
- 
- 
- 	if (!hs_req) {
--		u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx));
-+		u32 epctl = dwc2_readl(hsotg->regs + DOEPCTL(ep_idx));
- 		int ptr;
- 
- 		dev_warn(hsotg->dev,
-@@ -1311,7 +1311,7 @@ static void s3c_hsotg_rx_data(struct s3c
- 
- 		/* dump the data from the FIFO, we've nothing we can do */
- 		for (ptr = 0; ptr < size; ptr += 4)
--			(void)readl(fifo);
-+			(void)dwc2_readl(fifo);
- 
- 		return;
- 	}
-@@ -1378,14 +1378,14 @@ static void s3c_hsotg_send_zlp(struct s3
- 	dev_dbg(hsotg->dev, "sending zero-length packet\n");
- 
- 	/* issue a zero-sized packet to terminate this */
--	writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
-+	dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
- 	       DXEPTSIZ_XFERSIZE(0), hsotg->regs + DIEPTSIZ(0));
- 
--	ctrl = readl(hsotg->regs + DIEPCTL0);
-+	ctrl = dwc2_readl(hsotg->regs + DIEPCTL0);
- 	ctrl |= DXEPCTL_CNAK;  /* clear NAK set by core */
- 	ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */
- 	ctrl |= DXEPCTL_USBACTEP;
--	writel(ctrl, hsotg->regs + DIEPCTL0);
-+	dwc2_writel(ctrl, hsotg->regs + DIEPCTL0);
- }
- 
- /**
-@@ -1401,7 +1401,7 @@ static void s3c_hsotg_send_zlp(struct s3
- static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
- 				     int epnum, bool was_setup)
- {
--	u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum));
-+	u32 epsize = dwc2_readl(hsotg->regs + DOEPTSIZ(epnum));
- 	struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum];
- 	struct s3c_hsotg_req *hs_req = hs_ep->req;
- 	struct usb_request *req = &hs_req->req;
-@@ -1475,7 +1475,7 @@ static u32 s3c_hsotg_read_frameno(struct
- {
- 	u32 dsts;
- 
--	dsts = readl(hsotg->regs + DSTS);
-+	dsts = dwc2_readl(hsotg->regs + DSTS);
- 	dsts &= DSTS_SOFFN_MASK;
- 	dsts >>= DSTS_SOFFN_SHIFT;
- 
-@@ -1500,7 +1500,7 @@ static u32 s3c_hsotg_read_frameno(struct
-  */
- static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
- {
--	u32 grxstsr = readl(hsotg->regs + GRXSTSP);
-+	u32 grxstsr = dwc2_readl(hsotg->regs + GRXSTSP);
- 	u32 epnum, status, size;
- 
- 	WARN_ON(using_dma(hsotg));
-@@ -1532,7 +1532,7 @@ static void s3c_hsotg_handle_rx(struct s
- 		dev_dbg(hsotg->dev,
- 			"SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
- 			s3c_hsotg_read_frameno(hsotg),
--			readl(hsotg->regs + DOEPCTL(0)));
-+			dwc2_readl(hsotg->regs + DOEPCTL(0)));
- 
- 		s3c_hsotg_handle_outdone(hsotg, epnum, true);
- 		break;
-@@ -1545,7 +1545,7 @@ static void s3c_hsotg_handle_rx(struct s
- 		dev_dbg(hsotg->dev,
- 			"SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
- 			s3c_hsotg_read_frameno(hsotg),
--			readl(hsotg->regs + DOEPCTL(0)));
-+			dwc2_readl(hsotg->regs + DOEPCTL(0)));
- 
- 		s3c_hsotg_rx_data(hsotg, epnum, size);
- 		break;
-@@ -1622,16 +1622,16 @@ static void s3c_hsotg_set_ep_maxpacket(s
- 	 * if one of the directions may not be in use.
- 	 */
- 
--	reg = readl(regs + DIEPCTL(ep));
-+	reg = dwc2_readl(regs + DIEPCTL(ep));
- 	reg &= ~DXEPCTL_MPS_MASK;
- 	reg |= mpsval;
--	writel(reg, regs + DIEPCTL(ep));
-+	dwc2_writel(reg, regs + DIEPCTL(ep));
- 
- 	if (ep) {
--		reg = readl(regs + DOEPCTL(ep));
-+		reg = dwc2_readl(regs + DOEPCTL(ep));
- 		reg &= ~DXEPCTL_MPS_MASK;
- 		reg |= mpsval;
--		writel(reg, regs + DOEPCTL(ep));
-+		dwc2_writel(reg, regs + DOEPCTL(ep));
- 	}
- 
- 	return;
-@@ -1650,14 +1650,14 @@ static void s3c_hsotg_txfifo_flush(struc
- 	int timeout;
- 	int val;
- 
--	writel(GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH,
-+	dwc2_writel(GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH,
- 		hsotg->regs + GRSTCTL);
- 
- 	/* wait until the fifo is flushed */
- 	timeout = 100;
- 
- 	while (1) {
--		val = readl(hsotg->regs + GRSTCTL);
-+		val = dwc2_readl(hsotg->regs + GRSTCTL);
- 
- 		if ((val & (GRSTCTL_TXFFLSH)) == 0)
- 			break;
-@@ -1718,7 +1718,7 @@ static void s3c_hsotg_complete_in(struct
- 				  struct s3c_hsotg_ep *hs_ep)
- {
- 	struct s3c_hsotg_req *hs_req = hs_ep->req;
--	u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
-+	u32 epsize = dwc2_readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
- 	int size_left, size_done;
- 
- 	if (!hs_req) {
-@@ -1801,11 +1801,11 @@ static void s3c_hsotg_epint(struct s3c_h
- 	u32 ints;
- 	u32 ctrl;
- 
--	ints = readl(hsotg->regs + epint_reg);
--	ctrl = readl(hsotg->regs + epctl_reg);
-+	ints = dwc2_readl(hsotg->regs + epint_reg);
-+	ctrl = dwc2_readl(hsotg->regs + epctl_reg);
- 
- 	/* Clear endpoint interrupts */
--	writel(ints, hsotg->regs + epint_reg);
-+	dwc2_writel(ints, hsotg->regs + epint_reg);
- 
- 	dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n",
- 		__func__, idx, dir_in ? "in" : "out", ints);
-@@ -1816,13 +1816,13 @@ static void s3c_hsotg_epint(struct s3c_h
- 				ctrl |= DXEPCTL_SETEVENFR;
- 			else
- 				ctrl |= DXEPCTL_SETODDFR;
--			writel(ctrl, hsotg->regs + epctl_reg);
-+			dwc2_writel(ctrl, hsotg->regs + epctl_reg);
- 		}
- 
- 		dev_dbg(hsotg->dev,
- 			"%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n",
--			__func__, readl(hsotg->regs + epctl_reg),
--			readl(hsotg->regs + epsiz_reg));
-+			__func__, dwc2_readl(hsotg->regs + epctl_reg),
-+			dwc2_readl(hsotg->regs + epsiz_reg));
- 
- 		/*
- 		 * we get OutDone from the FIFO, so we only need to look
-@@ -1847,16 +1847,16 @@ static void s3c_hsotg_epint(struct s3c_h
- 		dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
- 
- 		if (dir_in) {
--			int epctl = readl(hsotg->regs + epctl_reg);
-+			int epctl = dwc2_readl(hsotg->regs + epctl_reg);
- 
- 			s3c_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
- 
- 			if ((epctl & DXEPCTL_STALL) &&
- 				(epctl & DXEPCTL_EPTYPE_BULK)) {
--				int dctl = readl(hsotg->regs + DCTL);
-+				int dctl = dwc2_readl(hsotg->regs + DCTL);
- 
- 				dctl |= DCTL_CGNPINNAK;
--				writel(dctl, hsotg->regs + DCTL);
-+				dwc2_writel(dctl, hsotg->regs + DCTL);
- 			}
- 		}
- 	}
-@@ -1918,7 +1918,7 @@ static void s3c_hsotg_epint(struct s3c_h
-  */
- static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
- {
--	u32 dsts = readl(hsotg->regs + DSTS);
-+	u32 dsts = dwc2_readl(hsotg->regs + DSTS);
- 	int ep0_mps = 0, ep_mps = 8;
- 
- 	/*
-@@ -1979,8 +1979,8 @@ static void s3c_hsotg_irq_enumdone(struc
- 	s3c_hsotg_enqueue_setup(hsotg);
- 
- 	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
--		readl(hsotg->regs + DIEPCTL0),
--		readl(hsotg->regs + DOEPCTL0));
-+		dwc2_readl(hsotg->regs + DIEPCTL0),
-+		dwc2_readl(hsotg->regs + DOEPCTL0));
- }
- 
- /**
-@@ -2014,7 +2014,7 @@ static void kill_all_requests(struct s3c
- 	}
- 	if (!hsotg->dedicated_fifos)
- 		return;
--	size = (readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4;
-+	size = (dwc2_readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4;
- 	if (size < ep->fifo_size)
- 		s3c_hsotg_txfifo_flush(hsotg, ep->fifo_index);
- }
-@@ -2084,11 +2084,11 @@ static int s3c_hsotg_corereset(struct s3
- 	dev_dbg(hsotg->dev, "resetting core\n");
- 
- 	/* issue soft reset */
--	writel(GRSTCTL_CSFTRST, hsotg->regs + GRSTCTL);
-+	dwc2_writel(GRSTCTL_CSFTRST, hsotg->regs + GRSTCTL);
- 
- 	timeout = 10000;
- 	do {
--		grstctl = readl(hsotg->regs + GRSTCTL);
-+		grstctl = dwc2_readl(hsotg->regs + GRSTCTL);
- 	} while ((grstctl & GRSTCTL_CSFTRST) && timeout-- > 0);
- 
- 	if (grstctl & GRSTCTL_CSFTRST) {
-@@ -2099,7 +2099,7 @@ static int s3c_hsotg_corereset(struct s3
- 	timeout = 10000;
- 
- 	while (1) {
--		u32 grstctl = readl(hsotg->regs + GRSTCTL);
-+		u32 grstctl = dwc2_readl(hsotg->regs + GRSTCTL);
- 
- 		if (timeout-- < 0) {
- 			dev_info(hsotg->dev,
-@@ -2134,22 +2134,22 @@ static void s3c_hsotg_core_init(struct s
- 	 */
- 
- 	/* set the PLL on, remove the HNP/SRP and set the PHY */
--	writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
-+	dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
- 	       (0x5 << 10), hsotg->regs + GUSBCFG);
- 
- 	s3c_hsotg_init_fifo(hsotg);
- 
- 	__orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
- 
--	writel(1 << 18 | DCFG_DEVSPD_HS,  hsotg->regs + DCFG);
-+	dwc2_writel(1 << 18 | DCFG_DEVSPD_HS,  hsotg->regs + DCFG);
- 
- 	/* Clear any pending OTG interrupts */
--	writel(0xffffffff, hsotg->regs + GOTGINT);
-+	dwc2_writel(0xffffffff, hsotg->regs + GOTGINT);
- 
- 	/* Clear any pending interrupts */
--	writel(0xffffffff, hsotg->regs + GINTSTS);
-+	dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
- 
--	writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT |
-+	dwc2_writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT |
- 		GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF |
- 		GINTSTS_CONIDSTSCHNG | GINTSTS_USBRST |
- 		GINTSTS_ENUMDONE | GINTSTS_OTGINT |
-@@ -2157,11 +2157,11 @@ static void s3c_hsotg_core_init(struct s
- 		hsotg->regs + GINTMSK);
- 
- 	if (using_dma(hsotg))
--		writel(GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN |
-+		dwc2_writel(GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN |
- 		       GAHBCFG_HBSTLEN_INCR4,
- 		       hsotg->regs + GAHBCFG);
- 	else
--		writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NP_TXF_EMP_LVL |
-+		dwc2_writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NP_TXF_EMP_LVL |
- 						    GAHBCFG_P_TXF_EMP_LVL) : 0) |
- 		       GAHBCFG_GLBL_INTR_EN,
- 		       hsotg->regs + GAHBCFG);
-@@ -2172,7 +2172,7 @@ static void s3c_hsotg_core_init(struct s
- 	 * interrupts.
- 	 */
- 
--	writel(((hsotg->dedicated_fifos) ? DIEPMSK_TXFIFOEMPTY |
-+	dwc2_writel(((hsotg->dedicated_fifos) ? DIEPMSK_TXFIFOEMPTY |
- 		DIEPMSK_INTKNTXFEMPMSK : 0) |
- 		DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK |
- 		DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
-@@ -2183,17 +2183,17 @@ static void s3c_hsotg_core_init(struct s
- 	 * don't need XferCompl, we get that from RXFIFO in slave mode. In
- 	 * DMA mode we may need this.
- 	 */
--	writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK |
-+	dwc2_writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK |
- 				    DIEPMSK_TIMEOUTMSK) : 0) |
- 		DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK |
- 		DOEPMSK_SETUPMSK,
- 		hsotg->regs + DOEPMSK);
- 
--	writel(0, hsotg->regs + DAINTMSK);
-+	dwc2_writel(0, hsotg->regs + DAINTMSK);
- 
- 	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
--		readl(hsotg->regs + DIEPCTL0),
--		readl(hsotg->regs + DOEPCTL0));
-+		dwc2_readl(hsotg->regs + DIEPCTL0),
-+		dwc2_readl(hsotg->regs + DOEPCTL0));
- 
- 	/* enable in and out endpoint interrupts */
- 	s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPINT | GINTSTS_IEPINT);
-@@ -2214,7 +2214,7 @@ static void s3c_hsotg_core_init(struct s
- 	udelay(10);  /* see openiboot */
- 	__bic32(hsotg->regs + DCTL, DCTL_PWRONPRGDONE);
- 
--	dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + DCTL));
-+	dev_dbg(hsotg->dev, "DCTL=0x%08x\n", dwc2_readl(hsotg->regs + DCTL));
- 
- 	/*
- 	 * DxEPCTL_USBActEp says RO in manual, but seems to be set by
-@@ -2222,26 +2222,26 @@ static void s3c_hsotg_core_init(struct s
- 	 */
- 
- 	/* set to read 1 8byte packet */
--	writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
-+	dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
- 	       DXEPTSIZ_XFERSIZE(8), hsotg->regs + DOEPTSIZ0);
- 
--	writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
-+	dwc2_writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
- 	       DXEPCTL_CNAK | DXEPCTL_EPENA |
- 	       DXEPCTL_USBACTEP,
- 	       hsotg->regs + DOEPCTL0);
- 
- 	/* enable, but don't activate EP0in */
--	writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
-+	dwc2_writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
- 	       DXEPCTL_USBACTEP, hsotg->regs + DIEPCTL0);
- 
- 	s3c_hsotg_enqueue_setup(hsotg);
- 
- 	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
--		readl(hsotg->regs + DIEPCTL0),
--		readl(hsotg->regs + DOEPCTL0));
-+		dwc2_readl(hsotg->regs + DIEPCTL0),
-+		dwc2_readl(hsotg->regs + DOEPCTL0));
- 
- 	/* clear global NAKs */
--	writel(DCTL_CGOUTNAK | DCTL_CGNPINNAK,
-+	dwc2_writel(DCTL_CGOUTNAK | DCTL_CGNPINNAK,
- 	       hsotg->regs + DCTL);
- 
- 	/* must be at-least 3ms to allow bus to see disconnect */
-@@ -2265,8 +2265,8 @@ static irqreturn_t s3c_hsotg_irq(int irq
- 
- 	spin_lock(&hsotg->lock);
- irq_retry:
--	gintsts = readl(hsotg->regs + GINTSTS);
--	gintmsk = readl(hsotg->regs + GINTMSK);
-+	gintsts = dwc2_readl(hsotg->regs + GINTSTS);
-+	gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 
- 	dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n",
- 		__func__, gintsts, gintsts & gintmsk, gintmsk, retry_count);
-@@ -2274,35 +2274,35 @@ irq_retry:
- 	gintsts &= gintmsk;
- 
- 	if (gintsts & GINTSTS_OTGINT) {
--		u32 otgint = readl(hsotg->regs + GOTGINT);
-+		u32 otgint = dwc2_readl(hsotg->regs + GOTGINT);
- 
- 		dev_info(hsotg->dev, "OTGInt: %08x\n", otgint);
- 
--		writel(otgint, hsotg->regs + GOTGINT);
-+		dwc2_writel(otgint, hsotg->regs + GOTGINT);
- 	}
- 
- 	if (gintsts & GINTSTS_SESSREQINT) {
- 		dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__);
--		writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
-+		dwc2_writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
- 	}
- 
- 	if (gintsts & GINTSTS_ENUMDONE) {
--		writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS);
-+		dwc2_writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS);
- 
- 		s3c_hsotg_irq_enumdone(hsotg);
- 	}
- 
- 	if (gintsts & GINTSTS_CONIDSTSCHNG) {
- 		dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n",
--			readl(hsotg->regs + DSTS),
--			readl(hsotg->regs + GOTGCTL));
-+			dwc2_readl(hsotg->regs + DSTS),
-+			dwc2_readl(hsotg->regs + GOTGCTL));
- 
--		writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
-+		dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
- 	}
- 
- 	if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) {
--		u32 daint = readl(hsotg->regs + DAINT);
--		u32 daintmsk = readl(hsotg->regs + DAINTMSK);
-+		u32 daint = dwc2_readl(hsotg->regs + DAINT);
-+		u32 daintmsk = dwc2_readl(hsotg->regs + DAINTMSK);
- 		u32 daint_out, daint_in;
- 		int ep;
- 
-@@ -2325,13 +2325,13 @@ irq_retry:
- 
- 	if (gintsts & GINTSTS_USBRST) {
- 
--		u32 usb_status = readl(hsotg->regs + GOTGCTL);
-+		u32 usb_status = dwc2_readl(hsotg->regs + GOTGCTL);
- 
- 		dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
- 		dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
--			readl(hsotg->regs + GNPTXSTS));
-+			dwc2_readl(hsotg->regs + GNPTXSTS));
- 
--		writel(GINTSTS_USBRST, hsotg->regs + GINTSTS);
-+		dwc2_writel(GINTSTS_USBRST, hsotg->regs + GINTSTS);
- 
- 		if (usb_status & GOTGCTL_BSESVLD) {
- 			if (time_after(jiffies, hsotg->last_rst +
-@@ -2382,26 +2382,26 @@ irq_retry:
- 
- 	if (gintsts & GINTSTS_MODEMIS) {
- 		dev_warn(hsotg->dev, "warning, mode mismatch triggered\n");
--		writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
-+		dwc2_writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
- 	}
- 
- 	if (gintsts & GINTSTS_USBSUSP) {
- 		dev_info(hsotg->dev, "GINTSTS_USBSusp\n");
--		writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
-+		dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
- 
- 		call_gadget(hsotg, suspend);
- 	}
- 
- 	if (gintsts & GINTSTS_WKUPINT) {
- 		dev_info(hsotg->dev, "GINTSTS_WkUpIn\n");
--		writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
-+		dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
- 
- 		call_gadget(hsotg, resume);
- 	}
- 
- 	if (gintsts & GINTSTS_ERLYSUSP) {
- 		dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n");
--		writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS);
-+		dwc2_writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS);
- 	}
- 
- 	/*
-@@ -2413,7 +2413,7 @@ irq_retry:
- 	if (gintsts & GINTSTS_GOUTNAKEFF) {
- 		dev_info(hsotg->dev, "GOUTNakEff triggered\n");
- 
--		writel(DCTL_CGOUTNAK, hsotg->regs + DCTL);
-+		dwc2_writel(DCTL_CGOUTNAK, hsotg->regs + DCTL);
- 
- 		s3c_hsotg_dump(hsotg);
- 	}
-@@ -2421,7 +2421,7 @@ irq_retry:
- 	if (gintsts & GINTSTS_GINNAKEFF) {
- 		dev_info(hsotg->dev, "GINNakEff triggered\n");
- 
--		writel(DCTL_CGNPINNAK, hsotg->regs + DCTL);
-+		dwc2_writel(DCTL_CGNPINNAK, hsotg->regs + DCTL);
- 
- 		s3c_hsotg_dump(hsotg);
- 	}
-@@ -2479,7 +2479,7 @@ static int s3c_hsotg_ep_enable(struct us
- 	/* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
- 
- 	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
--	epctrl = readl(hsotg->regs + epctrl_reg);
-+	epctrl = dwc2_readl(hsotg->regs + epctrl_reg);
- 
- 	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
- 		__func__, epctrl, epctrl_reg);
-@@ -2550,7 +2550,7 @@ static int s3c_hsotg_ep_enable(struct us
- 		for (i = 1; i <= 8; ++i) {
- 			if (hsotg->fifo_map & (1<<i))
- 				continue;
--			val = readl(hsotg->regs + DPTXFSIZN(i));
-+			val = dwc2_readl(hsotg->regs + DPTXFSIZN(i));
- 			val = (val >> FIFOSIZE_DEPTH_SHIFT)*4;
- 			if (val < size)
- 				continue;
-@@ -2574,9 +2574,9 @@ static int s3c_hsotg_ep_enable(struct us
- 	dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
- 		__func__, epctrl);
- 
--	writel(epctrl, hsotg->regs + epctrl_reg);
-+	dwc2_writel(epctrl, hsotg->regs + epctrl_reg);
- 	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n",
--		__func__, readl(hsotg->regs + epctrl_reg));
-+		__func__, dwc2_readl(hsotg->regs + epctrl_reg));
- 
- 	/* enable the endpoint interrupt */
- 	s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
-@@ -2617,13 +2617,13 @@ static int s3c_hsotg_ep_disable(struct u
- 	hs_ep->fifo_index = 0;
- 	hs_ep->fifo_size = 0;
- 
--	ctrl = readl(hsotg->regs + epctrl_reg);
-+	ctrl = dwc2_readl(hsotg->regs + epctrl_reg);
- 	ctrl &= ~DXEPCTL_EPENA;
- 	ctrl &= ~DXEPCTL_USBACTEP;
- 	ctrl |= DXEPCTL_SNAK;
- 
- 	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
--	writel(ctrl, hsotg->regs + epctrl_reg);
-+	dwc2_writel(ctrl, hsotg->regs + epctrl_reg);
- 
- 	/* disable endpoint interrupts */
- 	s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
-@@ -2704,7 +2704,7 @@ static int s3c_hsotg_ep_sethalt(struct u
- 	/* write both IN and OUT control registers */
- 
- 	epreg = DIEPCTL(index);
--	epctl = readl(hs->regs + epreg);
-+	epctl = dwc2_readl(hs->regs + epreg);
- 
- 	if (value) {
- 		epctl |= DXEPCTL_STALL + DXEPCTL_SNAK;
-@@ -2718,10 +2718,10 @@ static int s3c_hsotg_ep_sethalt(struct u
- 				epctl |= DXEPCTL_SETD0PID;
- 	}
- 
--	writel(epctl, hs->regs + epreg);
-+	dwc2_writel(epctl, hs->regs + epreg);
- 
- 	epreg = DOEPCTL(index);
--	epctl = readl(hs->regs + epreg);
-+	epctl = dwc2_readl(hs->regs + epreg);
- 
- 	if (value)
- 		epctl |= DXEPCTL_STALL;
-@@ -2733,7 +2733,7 @@ static int s3c_hsotg_ep_sethalt(struct u
- 				epctl |= DXEPCTL_SETD0PID;
- 	}
- 
--	writel(epctl, hs->regs + epreg);
-+	dwc2_writel(epctl, hs->regs + epreg);
- 
- 	hs_ep->halted = value;
- 
-@@ -2822,38 +2822,38 @@ static void s3c_hsotg_init(struct s3c_hs
- {
- 	/* unmask subset of endpoint interrupts */
- 
--	writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
-+	dwc2_writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
- 		DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK,
- 		hsotg->regs + DIEPMSK);
- 
--	writel(DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK |
-+	dwc2_writel(DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK |
- 		DOEPMSK_EPDISBLDMSK | DOEPMSK_XFERCOMPLMSK,
- 		hsotg->regs + DOEPMSK);
- 
--	writel(0, hsotg->regs + DAINTMSK);
-+	dwc2_writel(0, hsotg->regs + DAINTMSK);
- 
- 	/* Be in disconnected state until gadget is registered */
- 	__orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
- 
- 	if (0) {
- 		/* post global nak until we're ready */
--		writel(DCTL_SGNPINNAK | DCTL_SGOUTNAK,
-+		dwc2_writel(DCTL_SGNPINNAK | DCTL_SGOUTNAK,
- 		       hsotg->regs + DCTL);
- 	}
- 
- 	/* setup fifos */
- 
- 	dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
--		readl(hsotg->regs + GRXFSIZ),
--		readl(hsotg->regs + GNPTXFSIZ));
-+		dwc2_readl(hsotg->regs + GRXFSIZ),
-+		dwc2_readl(hsotg->regs + GNPTXFSIZ));
- 
- 	s3c_hsotg_init_fifo(hsotg);
- 
- 	/* set the PLL on, remove the HNP/SRP and set the PHY */
--	writel(GUSBCFG_PHYIF16 | GUSBCFG_TOUTCAL(7) | (0x5 << 10),
-+	dwc2_writel(GUSBCFG_PHYIF16 | GUSBCFG_TOUTCAL(7) | (0x5 << 10),
- 	       hsotg->regs + GUSBCFG);
- 
--	writel(using_dma(hsotg) ? GAHBCFG_DMA_EN : 0x0,
-+	dwc2_writel(using_dma(hsotg) ? GAHBCFG_DMA_EN : 0x0,
- 	       hsotg->regs + GAHBCFG);
- }
- 
-@@ -3045,8 +3045,8 @@ static void s3c_hsotg_initep(struct s3c_
- 
- 	if (using_dma(hsotg)) {
- 		u32 next = DXEPCTL_NEXTEP((epnum + 1) % 15);
--		writel(next, hsotg->regs + DIEPCTL(epnum));
--		writel(next, hsotg->regs + DOEPCTL(epnum));
-+		dwc2_writel(next, hsotg->regs + DIEPCTL(epnum));
-+		dwc2_writel(next, hsotg->regs + DOEPCTL(epnum));
- 	}
- }
- 
-@@ -3061,13 +3061,13 @@ static void s3c_hsotg_hw_cfg(struct s3c_
- 	u32 cfg2, cfg3, cfg4;
- 	/* check hardware configuration */
- 
--	cfg2 = readl(hsotg->regs + 0x48);
-+	cfg2 = dwc2_readl(hsotg->regs + 0x48);
- 	hsotg->num_of_eps = (cfg2 >> 10) & 0xF;
- 
--	cfg3 = readl(hsotg->regs + 0x4C);
-+	cfg3 = dwc2_readl(hsotg->regs + 0x4C);
- 	hsotg->fifo_mem = (cfg3 >> 16);
- 
--	cfg4 = readl(hsotg->regs + 0x50);
-+	cfg4 = dwc2_readl(hsotg->regs + 0x50);
- 	hsotg->dedicated_fifos = (cfg4 >> 25) & 1;
- 
- 	dev_info(hsotg->dev, "EPs: %d, %s fifos, %d entries in SPRAM\n",
-@@ -3089,19 +3089,19 @@ static void s3c_hsotg_dump(struct s3c_hs
- 	int idx;
- 
- 	dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n",
--		 readl(regs + DCFG), readl(regs + DCTL),
--		 readl(regs + DIEPMSK));
-+		 dwc2_readl(regs + DCFG), dwc2_readl(regs + DCTL),
-+		 dwc2_readl(regs + DIEPMSK));
- 
- 	dev_info(dev, "GAHBCFG=0x%08x, 0x44=0x%08x\n",
--		 readl(regs + GAHBCFG), readl(regs + 0x44));
-+		 dwc2_readl(regs + GAHBCFG), dwc2_readl(regs + 0x44));
- 
- 	dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
--		 readl(regs + GRXFSIZ), readl(regs + GNPTXFSIZ));
-+		 dwc2_readl(regs + GRXFSIZ), dwc2_readl(regs + GNPTXFSIZ));
- 
- 	/* show periodic fifo settings */
- 
- 	for (idx = 1; idx <= 15; idx++) {
--		val = readl(regs + DPTXFSIZN(idx));
-+		val = dwc2_readl(regs + DPTXFSIZN(idx));
- 		dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx,
- 			 val >> FIFOSIZE_DEPTH_SHIFT,
- 			 val & FIFOSIZE_STARTADDR_MASK);
-@@ -3110,21 +3110,21 @@ static void s3c_hsotg_dump(struct s3c_hs
- 	for (idx = 0; idx < 15; idx++) {
- 		dev_info(dev,
- 			 "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx,
--			 readl(regs + DIEPCTL(idx)),
--			 readl(regs + DIEPTSIZ(idx)),
--			 readl(regs + DIEPDMA(idx)));
-+			 dwc2_readl(regs + DIEPCTL(idx)),
-+			 dwc2_readl(regs + DIEPTSIZ(idx)),
-+			 dwc2_readl(regs + DIEPDMA(idx)));
- 
--		val = readl(regs + DOEPCTL(idx));
-+		val = dwc2_readl(regs + DOEPCTL(idx));
- 		dev_info(dev,
- 			 "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n",
--			 idx, readl(regs + DOEPCTL(idx)),
--			 readl(regs + DOEPTSIZ(idx)),
--			 readl(regs + DOEPDMA(idx)));
-+			 idx, dwc2_readl(regs + DOEPCTL(idx)),
-+			 dwc2_readl(regs + DOEPTSIZ(idx)),
-+			 dwc2_readl(regs + DOEPDMA(idx)));
- 
- 	}
- 
- 	dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
--		 readl(regs + DVBUSDIS), readl(regs + DVBUSPULSE));
-+		 dwc2_readl(regs + DVBUSDIS), dwc2_readl(regs + DVBUSPULSE));
- #endif
- }
- 
-@@ -3144,38 +3144,38 @@ static int state_show(struct seq_file *s
- 	int idx;
- 
- 	seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
--		 readl(regs + DCFG),
--		 readl(regs + DCTL),
--		 readl(regs + DSTS));
-+		 dwc2_readl(regs + DCFG),
-+		 dwc2_readl(regs + DCTL),
-+		 dwc2_readl(regs + DSTS));
- 
- 	seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
--		   readl(regs + DIEPMSK), readl(regs + DOEPMSK));
-+		   dwc2_readl(regs + DIEPMSK), dwc2_readl(regs + DOEPMSK));
- 
- 	seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
--		   readl(regs + GINTMSK),
--		   readl(regs + GINTSTS));
-+		   dwc2_readl(regs + GINTMSK),
-+		   dwc2_readl(regs + GINTSTS));
- 
- 	seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
--		   readl(regs + DAINTMSK),
--		   readl(regs + DAINT));
-+		   dwc2_readl(regs + DAINTMSK),
-+		   dwc2_readl(regs + DAINT));
- 
- 	seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
--		   readl(regs + GNPTXSTS),
--		   readl(regs + GRXSTSR));
-+		   dwc2_readl(regs + GNPTXSTS),
-+		   dwc2_readl(regs + GRXSTSR));
- 
- 	seq_puts(seq, "\nEndpoint status:\n");
- 
- 	for (idx = 0; idx < 15; idx++) {
- 		u32 in, out;
- 
--		in = readl(regs + DIEPCTL(idx));
--		out = readl(regs + DOEPCTL(idx));
-+		in = dwc2_readl(regs + DIEPCTL(idx));
-+		out = dwc2_readl(regs + DOEPCTL(idx));
- 
- 		seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
- 			   idx, in, out);
- 
--		in = readl(regs + DIEPTSIZ(idx));
--		out = readl(regs + DOEPTSIZ(idx));
-+		in = dwc2_readl(regs + DIEPTSIZ(idx));
-+		out = dwc2_readl(regs + DOEPTSIZ(idx));
- 
- 		seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
- 			   in, out);
-@@ -3215,9 +3215,9 @@ static int fifo_show(struct seq_file *se
- 	int idx;
- 
- 	seq_puts(seq, "Non-periodic FIFOs:\n");
--	seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
-+	seq_printf(seq, "RXFIFO: Size %d\n", dwc2_readl(regs + GRXFSIZ));
- 
--	val = readl(regs + GNPTXFSIZ);
-+	val = dwc2_readl(regs + GNPTXFSIZ);
- 	seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
- 		   val >> FIFOSIZE_DEPTH_SHIFT,
- 		   val & FIFOSIZE_DEPTH_MASK);
-@@ -3225,7 +3225,7 @@ static int fifo_show(struct seq_file *se
- 	seq_puts(seq, "\nPeriodic TXFIFOs:\n");
- 
- 	for (idx = 1; idx <= 15; idx++) {
--		val = readl(regs + DPTXFSIZN(idx));
-+		val = dwc2_readl(regs + DPTXFSIZN(idx));
- 
- 		seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
- 			   val >> FIFOSIZE_DEPTH_SHIFT,
-@@ -3278,20 +3278,20 @@ static int ep_show(struct seq_file *seq,
- 	/* first show the register state */
- 
- 	seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
--		   readl(regs + DIEPCTL(index)),
--		   readl(regs + DOEPCTL(index)));
-+		   dwc2_readl(regs + DIEPCTL(index)),
-+		   dwc2_readl(regs + DOEPCTL(index)));
- 
- 	seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
--		   readl(regs + DIEPDMA(index)),
--		   readl(regs + DOEPDMA(index)));
-+		   dwc2_readl(regs + DIEPDMA(index)),
-+		   dwc2_readl(regs + DOEPDMA(index)));
- 
- 	seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
--		   readl(regs + DIEPINT(index)),
--		   readl(regs + DOEPINT(index)));
-+		   dwc2_readl(regs + DIEPINT(index)),
-+		   dwc2_readl(regs + DOEPINT(index)));
- 
- 	seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
--		   readl(regs + DIEPTSIZ(index)),
--		   readl(regs + DOEPTSIZ(index)));
-+		   dwc2_readl(regs + DIEPTSIZ(index)),
-+		   dwc2_readl(regs + DOEPTSIZ(index)));
- 
- 	seq_puts(seq, "\n");
- 	seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
---- a/drivers/usb/dwc2/hcd.c
-+++ b/drivers/usb/dwc2/hcd.c
-@@ -80,10 +80,10 @@ static void dwc2_dump_channel_info(struc
- 	if (chan == NULL)
- 		return;
- 
--	hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
--	hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num));
--	hctsiz = readl(hsotg->regs + HCTSIZ(chan->hc_num));
--	hc_dma = readl(hsotg->regs + HCDMA(chan->hc_num));
-+	hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
-+	hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chan->hc_num));
-+	hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chan->hc_num));
-+	hc_dma = dwc2_readl(hsotg->regs + HCDMA(chan->hc_num));
- 
- 	dev_dbg(hsotg->dev, "  Assigned to channel %p:\n", chan);
- 	dev_dbg(hsotg->dev, "    hcchar 0x%08x, hcsplt 0x%08x\n",
-@@ -207,7 +207,7 @@ void dwc2_hcd_start(struct dwc2_hsotg *h
- 		 */
- 		hprt0 = dwc2_read_hprt0(hsotg);
- 		hprt0 |= HPRT0_RST;
--		writel(hprt0, hsotg->regs + HPRT0);
-+		dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 	}
- 
- 	queue_delayed_work(hsotg->wq_otg, &hsotg->start_work,
-@@ -228,11 +228,11 @@ static void dwc2_hcd_cleanup_channels(st
- 			channel = hsotg->hc_ptr_array[i];
- 			if (!list_empty(&channel->hc_list_entry))
- 				continue;
--			hcchar = readl(hsotg->regs + HCCHAR(i));
-+			hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- 			if (hcchar & HCCHAR_CHENA) {
- 				hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR);
- 				hcchar |= HCCHAR_CHDIS;
--				writel(hcchar, hsotg->regs + HCCHAR(i));
-+				dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- 			}
- 		}
- 	}
-@@ -241,11 +241,11 @@ static void dwc2_hcd_cleanup_channels(st
- 		channel = hsotg->hc_ptr_array[i];
- 		if (!list_empty(&channel->hc_list_entry))
- 			continue;
--		hcchar = readl(hsotg->regs + HCCHAR(i));
-+		hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- 		if (hcchar & HCCHAR_CHENA) {
- 			/* Halt the channel */
- 			hcchar |= HCCHAR_CHDIS;
--			writel(hcchar, hsotg->regs + HCCHAR(i));
-+			dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- 		}
- 
- 		dwc2_hc_cleanup(hsotg, channel);
-@@ -279,11 +279,11 @@ void dwc2_hcd_disconnect(struct dwc2_hso
- 	 * interrupt mask and status bits and disabling subsequent host
- 	 * channel interrupts.
- 	 */
--	intr = readl(hsotg->regs + GINTMSK);
-+	intr = dwc2_readl(hsotg->regs + GINTMSK);
- 	intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT);
--	writel(intr, hsotg->regs + GINTMSK);
-+	dwc2_writel(intr, hsotg->regs + GINTMSK);
- 	intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT;
--	writel(intr, hsotg->regs + GINTSTS);
-+	dwc2_writel(intr, hsotg->regs + GINTSTS);
- 
- 	/*
- 	 * Turn off the vbus power only if the core has transitioned to device
-@@ -293,7 +293,7 @@ void dwc2_hcd_disconnect(struct dwc2_hso
- 	if (dwc2_is_device_mode(hsotg)) {
- 		if (hsotg->op_state != OTG_STATE_A_SUSPEND) {
- 			dev_dbg(hsotg->dev, "Disconnect: PortPower off\n");
--			writel(0, hsotg->regs + HPRT0);
-+			dwc2_writel(0, hsotg->regs + HPRT0);
- 		}
- 
- 		dwc2_disable_host_interrupts(hsotg);
-@@ -344,7 +344,7 @@ void dwc2_hcd_stop(struct dwc2_hsotg *hs
- 
- 	/* Turn off the vbus power */
- 	dev_dbg(hsotg->dev, "PortPower off\n");
--	writel(0, hsotg->regs + HPRT0);
-+	dwc2_writel(0, hsotg->regs + HPRT0);
- }
- 
- static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg,
-@@ -369,7 +369,7 @@ static int dwc2_hcd_urb_enqueue(struct d
- 	if ((dev_speed == USB_SPEED_LOW) &&
- 	    (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) &&
- 	    (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) {
--		u32 hprt0 = readl(hsotg->regs + HPRT0);
-+		u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
- 		u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
- 
- 		if (prtspd == HPRT0_SPD_FULL_SPEED)
-@@ -391,7 +391,7 @@ static int dwc2_hcd_urb_enqueue(struct d
- 		return retval;
- 	}
- 
--	intr_mask = readl(hsotg->regs + GINTMSK);
-+	intr_mask = dwc2_readl(hsotg->regs + GINTMSK);
- 	if (!(intr_mask & GINTSTS_SOF)) {
- 		enum dwc2_transaction_type tr_type;
- 
-@@ -1059,7 +1059,7 @@ static void dwc2_process_periodic_channe
- 	if (dbg_perio())
- 		dev_vdbg(hsotg->dev, "Queue periodic transactions\n");
- 
--	tx_status = readl(hsotg->regs + HPTXSTS);
-+	tx_status = dwc2_readl(hsotg->regs + HPTXSTS);
- 	qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- 		    TXSTS_QSPCAVAIL_SHIFT;
- 	fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
-@@ -1074,7 +1074,7 @@ static void dwc2_process_periodic_channe
- 
- 	qh_ptr = hsotg->periodic_sched_assigned.next;
- 	while (qh_ptr != &hsotg->periodic_sched_assigned) {
--		tx_status = readl(hsotg->regs + HPTXSTS);
-+		tx_status = dwc2_readl(hsotg->regs + HPTXSTS);
- 		qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- 			    TXSTS_QSPCAVAIL_SHIFT;
- 		if (qspcavail == 0) {
-@@ -1134,7 +1134,7 @@ static void dwc2_process_periodic_channe
- 	}
- 
- 	if (hsotg->core_params->dma_enable <= 0) {
--		tx_status = readl(hsotg->regs + HPTXSTS);
-+		tx_status = dwc2_readl(hsotg->regs + HPTXSTS);
- 		qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- 			    TXSTS_QSPCAVAIL_SHIFT;
- 		fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
-@@ -1157,9 +1157,9 @@ static void dwc2_process_periodic_channe
- 			 * level to ensure that new requests are loaded as
- 			 * soon as possible.)
- 			 */
--			gintmsk = readl(hsotg->regs + GINTMSK);
-+			gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 			gintmsk |= GINTSTS_PTXFEMP;
--			writel(gintmsk, hsotg->regs + GINTMSK);
-+			dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- 		} else {
- 			/*
- 			 * Disable the Tx FIFO empty interrupt since there are
-@@ -1168,9 +1168,9 @@ static void dwc2_process_periodic_channe
- 			 * handlers to queue more transactions as transfer
- 			 * states change.
- 			 */
--			gintmsk = readl(hsotg->regs + GINTMSK);
-+			gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 			gintmsk &= ~GINTSTS_PTXFEMP;
--			writel(gintmsk, hsotg->regs + GINTMSK);
-+			dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- 		}
- 	}
- }
-@@ -1199,7 +1199,7 @@ static void dwc2_process_non_periodic_ch
- 
- 	dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n");
- 
--	tx_status = readl(hsotg->regs + GNPTXSTS);
-+	tx_status = dwc2_readl(hsotg->regs + GNPTXSTS);
- 	qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- 		    TXSTS_QSPCAVAIL_SHIFT;
- 	fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
-@@ -1222,7 +1222,7 @@ static void dwc2_process_non_periodic_ch
- 	 * available in the request queue or the Tx FIFO
- 	 */
- 	do {
--		tx_status = readl(hsotg->regs + GNPTXSTS);
-+		tx_status = dwc2_readl(hsotg->regs + GNPTXSTS);
- 		qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- 			    TXSTS_QSPCAVAIL_SHIFT;
- 		if (hsotg->core_params->dma_enable <= 0 && qspcavail == 0) {
-@@ -1259,7 +1259,7 @@ next:
- 	} while (hsotg->non_periodic_qh_ptr != orig_qh_ptr);
- 
- 	if (hsotg->core_params->dma_enable <= 0) {
--		tx_status = readl(hsotg->regs + GNPTXSTS);
-+		tx_status = dwc2_readl(hsotg->regs + GNPTXSTS);
- 		qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- 			    TXSTS_QSPCAVAIL_SHIFT;
- 		fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
-@@ -1279,9 +1279,9 @@ next:
- 			 * level to ensure that new requests are loaded as
- 			 * soon as possible.)
- 			 */
--			gintmsk = readl(hsotg->regs + GINTMSK);
-+			gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 			gintmsk |= GINTSTS_NPTXFEMP;
--			writel(gintmsk, hsotg->regs + GINTMSK);
-+			dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- 		} else {
- 			/*
- 			 * Disable the Tx FIFO empty interrupt since there are
-@@ -1290,9 +1290,9 @@ next:
- 			 * handlers to queue more transactions as transfer
- 			 * states change.
- 			 */
--			gintmsk = readl(hsotg->regs + GINTMSK);
-+			gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 			gintmsk &= ~GINTSTS_NPTXFEMP;
--			writel(gintmsk, hsotg->regs + GINTMSK);
-+			dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- 		}
- 	}
- }
-@@ -1330,10 +1330,10 @@ void dwc2_hcd_queue_transactions(struct
- 			 * Ensure NP Tx FIFO empty interrupt is disabled when
- 			 * there are no non-periodic transfers to process
- 			 */
--			u32 gintmsk = readl(hsotg->regs + GINTMSK);
-+			u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 
- 			gintmsk &= ~GINTSTS_NPTXFEMP;
--			writel(gintmsk, hsotg->regs + GINTMSK);
-+			dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- 		}
- 	}
- }
-@@ -1347,7 +1347,7 @@ static void dwc2_conn_id_status_change(s
- 
- 	dev_dbg(hsotg->dev, "%s()\n", __func__);
- 
--	gotgctl = readl(hsotg->regs + GOTGCTL);
-+	gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 	dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl);
- 	dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n",
- 		!!(gotgctl & GOTGCTL_CONID_B));
-@@ -1408,9 +1408,9 @@ static void dwc2_wakeup_detected(unsigne
- 	hprt0 = dwc2_read_hprt0(hsotg);
- 	dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0);
- 	hprt0 &= ~HPRT0_RES;
--	writel(hprt0, hsotg->regs + HPRT0);
-+	dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 	dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n",
--		readl(hsotg->regs + HPRT0));
-+		dwc2_readl(hsotg->regs + HPRT0));
- 
- 	dwc2_hcd_rem_wakeup(hsotg);
- 
-@@ -1438,30 +1438,30 @@ static void dwc2_port_suspend(struct dwc
- 	spin_lock_irqsave(&hsotg->lock, flags);
- 
- 	if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) {
--		gotgctl = readl(hsotg->regs + GOTGCTL);
-+		gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- 		gotgctl |= GOTGCTL_HSTSETHNPEN;
--		writel(gotgctl, hsotg->regs + GOTGCTL);
-+		dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
- 		hsotg->op_state = OTG_STATE_A_SUSPEND;
- 	}
- 
- 	hprt0 = dwc2_read_hprt0(hsotg);
- 	hprt0 |= HPRT0_SUSP;
--	writel(hprt0, hsotg->regs + HPRT0);
-+	dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 
- 	/* Update lx_state */
- 	hsotg->lx_state = DWC2_L2;
- 
- 	/* Suspend the Phy Clock */
--	pcgctl = readl(hsotg->regs + PCGCTL);
-+	pcgctl = dwc2_readl(hsotg->regs + PCGCTL);
- 	pcgctl |= PCGCTL_STOPPCLK;
--	writel(pcgctl, hsotg->regs + PCGCTL);
-+	dwc2_writel(pcgctl, hsotg->regs + PCGCTL);
- 	udelay(10);
- 
- 	/* For HNP the bus must be suspended for at least 200ms */
- 	if (dwc2_host_is_b_hnp_enabled(hsotg)) {
--		pcgctl = readl(hsotg->regs + PCGCTL);
-+		pcgctl = dwc2_readl(hsotg->regs + PCGCTL);
- 		pcgctl &= ~PCGCTL_STOPPCLK;
--		writel(pcgctl, hsotg->regs + PCGCTL);
-+		dwc2_writel(pcgctl, hsotg->regs + PCGCTL);
- 
- 		spin_unlock_irqrestore(&hsotg->lock, flags);
- 
-@@ -1510,23 +1510,23 @@ static int dwc2_hcd_hub_control(struct d
- 				"ClearPortFeature USB_PORT_FEAT_ENABLE\n");
- 			hprt0 = dwc2_read_hprt0(hsotg);
- 			hprt0 |= HPRT0_ENA;
--			writel(hprt0, hsotg->regs + HPRT0);
-+			dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 			break;
- 
- 		case USB_PORT_FEAT_SUSPEND:
- 			dev_dbg(hsotg->dev,
- 				"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
--			writel(0, hsotg->regs + PCGCTL);
-+			dwc2_writel(0, hsotg->regs + PCGCTL);
- 			msleep(USB_RESUME_TIMEOUT);
- 
- 			hprt0 = dwc2_read_hprt0(hsotg);
- 			hprt0 |= HPRT0_RES;
--			writel(hprt0, hsotg->regs + HPRT0);
-+			dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 			hprt0 &= ~HPRT0_SUSP;
- 			usleep_range(100000, 150000);
- 
- 			hprt0 &= ~HPRT0_RES;
--			writel(hprt0, hsotg->regs + HPRT0);
-+			dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 			break;
- 
- 		case USB_PORT_FEAT_POWER:
-@@ -1534,7 +1534,7 @@ static int dwc2_hcd_hub_control(struct d
- 				"ClearPortFeature USB_PORT_FEAT_POWER\n");
- 			hprt0 = dwc2_read_hprt0(hsotg);
- 			hprt0 &= ~HPRT0_PWR;
--			writel(hprt0, hsotg->regs + HPRT0);
-+			dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 			break;
- 
- 		case USB_PORT_FEAT_INDICATOR:
-@@ -1653,7 +1653,7 @@ static int dwc2_hcd_hub_control(struct d
- 			break;
- 		}
- 
--		hprt0 = readl(hsotg->regs + HPRT0);
-+		hprt0 = dwc2_readl(hsotg->regs + HPRT0);
- 		dev_vdbg(hsotg->dev, "  HPRT0: 0x%08x\n", hprt0);
- 
- 		if (hprt0 & HPRT0_CONNSTS)
-@@ -1718,18 +1718,18 @@ static int dwc2_hcd_hub_control(struct d
- 				"SetPortFeature - USB_PORT_FEAT_POWER\n");
- 			hprt0 = dwc2_read_hprt0(hsotg);
- 			hprt0 |= HPRT0_PWR;
--			writel(hprt0, hsotg->regs + HPRT0);
-+			dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 			break;
- 
- 		case USB_PORT_FEAT_RESET:
- 			hprt0 = dwc2_read_hprt0(hsotg);
- 			dev_dbg(hsotg->dev,
- 				"SetPortFeature - USB_PORT_FEAT_RESET\n");
--			pcgctl = readl(hsotg->regs + PCGCTL);
-+			pcgctl = dwc2_readl(hsotg->regs + PCGCTL);
- 			pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK);
--			writel(pcgctl, hsotg->regs + PCGCTL);
-+			dwc2_writel(pcgctl, hsotg->regs + PCGCTL);
- 			/* ??? Original driver does this */
--			writel(0, hsotg->regs + PCGCTL);
-+			dwc2_writel(0, hsotg->regs + PCGCTL);
- 
- 			hprt0 = dwc2_read_hprt0(hsotg);
- 			/* Clear suspend bit if resetting from suspend state */
-@@ -1744,13 +1744,13 @@ static int dwc2_hcd_hub_control(struct d
- 				hprt0 |= HPRT0_PWR | HPRT0_RST;
- 				dev_dbg(hsotg->dev,
- 					"In host mode, hprt0=%08x\n", hprt0);
--				writel(hprt0, hsotg->regs + HPRT0);
-+				dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 			}
- 
- 			/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
- 			usleep_range(50000, 70000);
- 			hprt0 &= ~HPRT0_RST;
--			writel(hprt0, hsotg->regs + HPRT0);
-+			dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 			hsotg->lx_state = DWC2_L0; /* Now back to On state */
- 			break;
- 
-@@ -1814,7 +1814,7 @@ static int dwc2_hcd_is_status_changed(st
- 
- int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
- {
--	u32 hfnum = readl(hsotg->regs + HFNUM);
-+	u32 hfnum = dwc2_readl(hsotg->regs + HFNUM);
- 
- #ifdef DWC2_DEBUG_SOF
- 	dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n",
-@@ -1917,11 +1917,11 @@ void dwc2_hcd_dump_state(struct dwc2_hso
- 		if (chan->xfer_started) {
- 			u32 hfnum, hcchar, hctsiz, hcint, hcintmsk;
- 
--			hfnum = readl(hsotg->regs + HFNUM);
--			hcchar = readl(hsotg->regs + HCCHAR(i));
--			hctsiz = readl(hsotg->regs + HCTSIZ(i));
--			hcint = readl(hsotg->regs + HCINT(i));
--			hcintmsk = readl(hsotg->regs + HCINTMSK(i));
-+			hfnum = dwc2_readl(hsotg->regs + HFNUM);
-+			hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
-+			hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(i));
-+			hcint = dwc2_readl(hsotg->regs + HCINT(i));
-+			hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(i));
- 			dev_dbg(hsotg->dev, "    hfnum: 0x%08x\n", hfnum);
- 			dev_dbg(hsotg->dev, "    hcchar: 0x%08x\n", hcchar);
- 			dev_dbg(hsotg->dev, "    hctsiz: 0x%08x\n", hctsiz);
-@@ -1969,12 +1969,12 @@ void dwc2_hcd_dump_state(struct dwc2_hso
- 	dev_dbg(hsotg->dev, "  periodic_channels: %d\n",
- 		hsotg->periodic_channels);
- 	dev_dbg(hsotg->dev, "  periodic_usecs: %d\n", hsotg->periodic_usecs);
--	np_tx_status = readl(hsotg->regs + GNPTXSTS);
-+	np_tx_status = dwc2_readl(hsotg->regs + GNPTXSTS);
- 	dev_dbg(hsotg->dev, "  NP Tx Req Queue Space Avail: %d\n",
- 		(np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
- 	dev_dbg(hsotg->dev, "  NP Tx FIFO Space Avail: %d\n",
- 		(np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT);
--	p_tx_status = readl(hsotg->regs + HPTXSTS);
-+	p_tx_status = dwc2_readl(hsotg->regs + HPTXSTS);
- 	dev_dbg(hsotg->dev, "  P Tx Req Queue Space Avail: %d\n",
- 		(p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
- 	dev_dbg(hsotg->dev, "  P Tx FIFO Space Avail: %d\n",
-@@ -2238,7 +2238,7 @@ static void dwc2_hcd_reset_func(struct w
- 	dev_dbg(hsotg->dev, "USB RESET function called\n");
- 	hprt0 = dwc2_read_hprt0(hsotg);
- 	hprt0 &= ~HPRT0_RST;
--	writel(hprt0, hsotg->regs + HPRT0);
-+	dwc2_writel(hprt0, hsotg->regs + HPRT0);
- 	hsotg->flags.b.port_reset_change = 1;
- }
- 
-@@ -2715,17 +2715,17 @@ static void dwc2_hcd_free(struct dwc2_hs
- 		hsotg->status_buf = NULL;
- 	}
- 
--	ahbcfg = readl(hsotg->regs + GAHBCFG);
-+	ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
- 
- 	/* Disable all interrupts */
- 	ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
--	writel(ahbcfg, hsotg->regs + GAHBCFG);
--	writel(0, hsotg->regs + GINTMSK);
-+	dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
-+	dwc2_writel(0, hsotg->regs + GINTMSK);
- 
- 	if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) {
--		dctl = readl(hsotg->regs + DCTL);
-+		dctl = dwc2_readl(hsotg->regs + DCTL);
- 		dctl |= DCTL_SFTDISCON;
--		writel(dctl, hsotg->regs + DCTL);
-+		dwc2_writel(dctl, hsotg->regs + DCTL);
- 	}
- 
- 	if (hsotg->wq_otg) {
-@@ -2788,7 +2788,7 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
- 
- 	retval = -ENOMEM;
- 
--	hcfg = readl(hsotg->regs + HCFG);
-+	hcfg = dwc2_readl(hsotg->regs + HCFG);
- 	dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg);
- 
- #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
---- a/drivers/usb/dwc2/hcd_ddma.c
-+++ b/drivers/usb/dwc2/hcd_ddma.c
-@@ -169,19 +169,19 @@ static void dwc2_per_sched_enable(struct
- 
- 	spin_lock_irqsave(&hsotg->lock, flags);
- 
--	hcfg = readl(hsotg->regs + HCFG);
-+	hcfg = dwc2_readl(hsotg->regs + HCFG);
- 	if (hcfg & HCFG_PERSCHEDENA) {
- 		/* already enabled */
- 		spin_unlock_irqrestore(&hsotg->lock, flags);
- 		return;
- 	}
- 
--	writel(hsotg->frame_list_dma, hsotg->regs + HFLBADDR);
-+	dwc2_writel(hsotg->frame_list_dma, hsotg->regs + HFLBADDR);
- 
- 	hcfg &= ~HCFG_FRLISTEN_MASK;
- 	hcfg |= fr_list_en | HCFG_PERSCHEDENA;
- 	dev_vdbg(hsotg->dev, "Enabling Periodic schedule\n");
--	writel(hcfg, hsotg->regs + HCFG);
-+	dwc2_writel(hcfg, hsotg->regs + HCFG);
- 
- 	spin_unlock_irqrestore(&hsotg->lock, flags);
- }
-@@ -193,7 +193,7 @@ static void dwc2_per_sched_disable(struc
- 
- 	spin_lock_irqsave(&hsotg->lock, flags);
- 
--	hcfg = readl(hsotg->regs + HCFG);
-+	hcfg = dwc2_readl(hsotg->regs + HCFG);
- 	if (!(hcfg & HCFG_PERSCHEDENA)) {
- 		/* already disabled */
- 		spin_unlock_irqrestore(&hsotg->lock, flags);
-@@ -202,7 +202,7 @@ static void dwc2_per_sched_disable(struc
- 
- 	hcfg &= ~HCFG_PERSCHEDENA;
- 	dev_vdbg(hsotg->dev, "Disabling Periodic schedule\n");
--	writel(hcfg, hsotg->regs + HCFG);
-+	dwc2_writel(hcfg, hsotg->regs + HCFG);
- 
- 	spin_unlock_irqrestore(&hsotg->lock, flags);
- }
---- a/drivers/usb/dwc2/hcd.h
-+++ b/drivers/usb/dwc2/hcd.h
-@@ -371,10 +371,10 @@ static inline struct usb_hcd *dwc2_hsotg
-  */
- static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
- {
--	u32 mask = readl(hsotg->regs + HCINTMSK(chnum));
-+	u32 mask = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
- 
- 	mask &= ~intr;
--	writel(mask, hsotg->regs + HCINTMSK(chnum));
-+	dwc2_writel(mask, hsotg->regs + HCINTMSK(chnum));
- }
- 
- /*
-@@ -382,11 +382,11 @@ static inline void disable_hc_int(struct
-  */
- static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg)
- {
--	return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
-+	return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
- }
- static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
- {
--	return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
-+	return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
- }
- 
- /*
-@@ -395,7 +395,7 @@ static inline int dwc2_is_device_mode(st
-  */
- static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg)
- {
--	u32 hprt0 = readl(hsotg->regs + HPRT0);
-+	u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
- 
- 	hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
- 	return hprt0;
-@@ -582,7 +582,7 @@ static inline u16 dwc2_micro_frame_num(u
-  */
- static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg)
- {
--	return readl(hsotg->regs + GINTSTS) & readl(hsotg->regs + GINTMSK);
-+	return dwc2_readl(hsotg->regs + GINTSTS) & dwc2_readl(hsotg->regs + GINTMSK);
- }
- 
- static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb)
-@@ -744,7 +744,7 @@ do {									\
- 			   qtd_list_entry);				\
- 	if (usb_pipeint(_qtd_->urb->pipe) &&				\
- 	    (_qh_)->start_split_frame != 0 && !_qtd_->complete_split) {	\
--		_hfnum_.d32 = readl((_hcd_)->regs + HFNUM);		\
-+		_hfnum_.d32 = dwc2_readl((_hcd_)->regs + HFNUM);		\
- 		switch (_hfnum_.b.frnum & 0x7) {			\
- 		case 7:							\
- 			(_hcd_)->hfnum_7_samples_##_letter_++;		\
---- a/drivers/usb/dwc2/hcd_intr.c
-+++ b/drivers/usb/dwc2/hcd_intr.c
-@@ -148,7 +148,7 @@ static void dwc2_sof_intr(struct dwc2_hs
- 		dwc2_hcd_queue_transactions(hsotg, tr_type);
- 
- 	/* Clear interrupt */
--	writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
-+	dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
- }
- 
- /*
-@@ -164,7 +164,7 @@ static void dwc2_rx_fifo_level_intr(stru
- 	if (dbg_perio())
- 		dev_vdbg(hsotg->dev, "--RxFIFO Level Interrupt--\n");
- 
--	grxsts = readl(hsotg->regs + GRXSTSP);
-+	grxsts = dwc2_readl(hsotg->regs + GRXSTSP);
- 	chnum = (grxsts & GRXSTS_HCHNUM_MASK) >> GRXSTS_HCHNUM_SHIFT;
- 	chan = hsotg->hc_ptr_array[chnum];
- 	if (!chan) {
-@@ -247,11 +247,11 @@ static void dwc2_hprt0_enable(struct dwc
- 	dev_vdbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
- 
- 	/* Every time when port enables calculate HFIR.FrInterval */
--	hfir = readl(hsotg->regs + HFIR);
-+	hfir = dwc2_readl(hsotg->regs + HFIR);
- 	hfir &= ~HFIR_FRINT_MASK;
- 	hfir |= dwc2_calc_frame_interval(hsotg) << HFIR_FRINT_SHIFT &
- 		HFIR_FRINT_MASK;
--	writel(hfir, hsotg->regs + HFIR);
-+	dwc2_writel(hfir, hsotg->regs + HFIR);
- 
- 	/* Check if we need to adjust the PHY clock speed for low power */
- 	if (!params->host_support_fs_ls_low_power) {
-@@ -260,7 +260,7 @@ static void dwc2_hprt0_enable(struct dwc
- 		return;
- 	}
- 
--	usbcfg = readl(hsotg->regs + GUSBCFG);
-+	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- 	prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
- 
- 	if (prtspd == HPRT0_SPD_LOW_SPEED || prtspd == HPRT0_SPD_FULL_SPEED) {
-@@ -268,11 +268,11 @@ static void dwc2_hprt0_enable(struct dwc
- 		if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL)) {
- 			/* Set PHY low power clock select for FS/LS devices */
- 			usbcfg |= GUSBCFG_PHY_LP_CLK_SEL;
--			writel(usbcfg, hsotg->regs + GUSBCFG);
-+			dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- 			do_reset = 1;
- 		}
- 
--		hcfg = readl(hsotg->regs + HCFG);
-+		hcfg = dwc2_readl(hsotg->regs + HCFG);
- 		fslspclksel = (hcfg & HCFG_FSLSPCLKSEL_MASK) >>
- 			      HCFG_FSLSPCLKSEL_SHIFT;
- 
-@@ -286,7 +286,7 @@ static void dwc2_hprt0_enable(struct dwc
- 				fslspclksel = HCFG_FSLSPCLKSEL_6_MHZ;
- 				hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
- 				hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT;
--				writel(hcfg, hsotg->regs + HCFG);
-+				dwc2_writel(hcfg, hsotg->regs + HCFG);
- 				do_reset = 1;
- 			}
- 		} else {
-@@ -297,7 +297,7 @@ static void dwc2_hprt0_enable(struct dwc
- 				fslspclksel = HCFG_FSLSPCLKSEL_48_MHZ;
- 				hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
- 				hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT;
--				writel(hcfg, hsotg->regs + HCFG);
-+				dwc2_writel(hcfg, hsotg->regs + HCFG);
- 				do_reset = 1;
- 			}
- 		}
-@@ -305,7 +305,7 @@ static void dwc2_hprt0_enable(struct dwc
- 		/* Not low power */
- 		if (usbcfg & GUSBCFG_PHY_LP_CLK_SEL) {
- 			usbcfg &= ~GUSBCFG_PHY_LP_CLK_SEL;
--			writel(usbcfg, hsotg->regs + GUSBCFG);
-+			dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- 			do_reset = 1;
- 		}
- 	}
-@@ -332,7 +332,7 @@ static void dwc2_port_intr(struct dwc2_h
- 
- 	dev_vdbg(hsotg->dev, "--Port Interrupt--\n");
- 
--	hprt0 = readl(hsotg->regs + HPRT0);
-+	hprt0 = dwc2_readl(hsotg->regs + HPRT0);
- 	hprt0_modify = hprt0;
- 
- 	/*
-@@ -385,7 +385,7 @@ static void dwc2_port_intr(struct dwc2_h
- 	}
- 
- 	/* Clear Port Interrupts */
--	writel(hprt0_modify, hsotg->regs + HPRT0);
-+	dwc2_writel(hprt0_modify, hsotg->regs + HPRT0);
- }
- 
- /*
-@@ -405,7 +405,7 @@ static u32 dwc2_get_actual_xfer_length(s
- {
- 	u32 hctsiz, count, length;
- 
--	hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-+	hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
- 
- 	if (halt_status == DWC2_HC_XFER_COMPLETE) {
- 		if (chan->ep_is_in) {
-@@ -483,7 +483,7 @@ static int dwc2_update_urb_state(struct
- 		urb->status = 0;
- 	}
- 
--	hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-+	hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
- 	dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
- 		 __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
- 	dev_vdbg(hsotg->dev, "  chan->xfer_len %d\n", chan->xfer_len);
-@@ -506,7 +506,7 @@ void dwc2_hcd_save_data_toggle(struct dw
- 			       struct dwc2_host_chan *chan, int chnum,
- 			       struct dwc2_qtd *qtd)
- {
--	u32 hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-+	u32 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
- 	u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
- 
- 	if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) {
-@@ -753,9 +753,9 @@ cleanup:
- 		}
- 	}
- 
--	haintmsk = readl(hsotg->regs + HAINTMSK);
-+	haintmsk = dwc2_readl(hsotg->regs + HAINTMSK);
- 	haintmsk &= ~(1 << chan->hc_num);
--	writel(haintmsk, hsotg->regs + HAINTMSK);
-+	dwc2_writel(haintmsk, hsotg->regs + HAINTMSK);
- 
- 	/* Try to queue more transfers now that there's a free channel */
- 	tr_type = dwc2_hcd_select_transactions(hsotg);
-@@ -802,9 +802,9 @@ static void dwc2_halt_channel(struct dwc
- 			 * is enabled so that the non-periodic schedule will
- 			 * be processed
- 			 */
--			gintmsk = readl(hsotg->regs + GINTMSK);
-+			gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 			gintmsk |= GINTSTS_NPTXFEMP;
--			writel(gintmsk, hsotg->regs + GINTMSK);
-+			dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- 		} else {
- 			dev_vdbg(hsotg->dev, "isoc/intr\n");
- 			/*
-@@ -821,9 +821,9 @@ static void dwc2_halt_channel(struct dwc
- 			 * enabled so that the periodic schedule will be
- 			 * processed
- 			 */
--			gintmsk = readl(hsotg->regs + GINTMSK);
-+			gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- 			gintmsk |= GINTSTS_PTXFEMP;
--			writel(gintmsk, hsotg->regs + GINTMSK);
-+			dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- 		}
- 	}
- }
-@@ -888,7 +888,7 @@ static void dwc2_complete_periodic_xfer(
- 					struct dwc2_qtd *qtd,
- 					enum dwc2_halt_status halt_status)
- {
--	u32 hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-+	u32 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
- 
- 	qtd->error_count = 0;
- 
-@@ -1158,7 +1158,7 @@ static void dwc2_update_urb_state_abn(st
- 
- 	urb->actual_length += xfer_length;
- 
--	hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-+	hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
- 	dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
- 		 __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
- 	dev_vdbg(hsotg->dev, "  chan->start_pkt_count %d\n",
-@@ -1469,10 +1469,10 @@ static void dwc2_hc_ahberr_intr(struct d
- 
- 	dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
- 
--	hcchar = readl(hsotg->regs + HCCHAR(chnum));
--	hcsplt = readl(hsotg->regs + HCSPLT(chnum));
--	hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
--	hc_dma = readl(hsotg->regs + HCDMA(chnum));
-+	hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
-+	hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chnum));
-+	hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
-+	hc_dma = dwc2_readl(hsotg->regs + HCDMA(chnum));
- 
- 	dev_err(hsotg->dev, "AHB ERROR, Channel %d\n", chnum);
- 	dev_err(hsotg->dev, "  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar, hcsplt);
-@@ -1685,10 +1685,10 @@ static bool dwc2_halt_status_ok(struct d
- 		 * This code is here only as a check. This condition should
- 		 * never happen. Ignore the halt if it does occur.
- 		 */
--		hcchar = readl(hsotg->regs + HCCHAR(chnum));
--		hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
--		hcintmsk = readl(hsotg->regs + HCINTMSK(chnum));
--		hcsplt = readl(hsotg->regs + HCSPLT(chnum));
-+		hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
-+		hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
-+		hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
-+		hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chnum));
- 		dev_dbg(hsotg->dev,
- 			"%s: chan->halt_status DWC2_HC_XFER_NO_HALT_STATUS,\n",
- 			 __func__);
-@@ -1712,7 +1712,7 @@ static bool dwc2_halt_status_ok(struct d
- 	 * when the halt interrupt occurs. Halt the channel again if it does
- 	 * occur.
- 	 */
--	hcchar = readl(hsotg->regs + HCCHAR(chnum));
-+	hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
- 	if (hcchar & HCCHAR_CHDIS) {
- 		dev_warn(hsotg->dev,
- 			 "%s: hcchar.chdis set unexpectedly, hcchar 0x%08x, trying to halt again\n",
-@@ -1772,7 +1772,7 @@ static void dwc2_hc_chhltd_intr_dma(stru
- 		return;
- 	}
- 
--	hcintmsk = readl(hsotg->regs + HCINTMSK(chnum));
-+	hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
- 
- 	if (chan->hcint & HCINTMSK_XFERCOMPL) {
- 		/*
-@@ -1867,7 +1867,7 @@ static void dwc2_hc_chhltd_intr_dma(stru
- 				dev_err(hsotg->dev,
- 					"hcint 0x%08x, intsts 0x%08x\n",
- 					chan->hcint,
--					readl(hsotg->regs + GINTSTS));
-+					dwc2_readl(hsotg->regs + GINTSTS));
- 				goto error;
- 			}
- 		}
-@@ -1922,11 +1922,11 @@ static void dwc2_hc_n_intr(struct dwc2_h
- 
- 	chan = hsotg->hc_ptr_array[chnum];
- 
--	hcint = readl(hsotg->regs + HCINT(chnum));
--	hcintmsk = readl(hsotg->regs + HCINTMSK(chnum));
-+	hcint = dwc2_readl(hsotg->regs + HCINT(chnum));
-+	hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
- 	if (!chan) {
- 		dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n");
--		writel(hcint, hsotg->regs + HCINT(chnum));
-+		dwc2_writel(hcint, hsotg->regs + HCINT(chnum));
- 		return;
- 	}
- 
-@@ -1938,7 +1938,7 @@ static void dwc2_hc_n_intr(struct dwc2_h
- 			 hcint, hcintmsk, hcint & hcintmsk);
- 	}
- 
--	writel(hcint, hsotg->regs + HCINT(chnum));
-+	dwc2_writel(hcint, hsotg->regs + HCINT(chnum));
- 	chan->hcint = hcint;
- 	hcint &= hcintmsk;
- 
-@@ -2030,7 +2030,7 @@ static void dwc2_hc_intr(struct dwc2_hso
- 	u32 haint;
- 	int i;
- 
--	haint = readl(hsotg->regs + HAINT);
-+	haint = dwc2_readl(hsotg->regs + HAINT);
- 	if (dbg_perio()) {
- 		dev_vdbg(hsotg->dev, "%s()\n", __func__);
- 
-@@ -2098,8 +2098,8 @@ irqreturn_t dwc2_handle_hcd_intr(struct
- 				 "DWC OTG HCD Finished Servicing Interrupts\n");
- 			dev_vdbg(hsotg->dev,
- 				 "DWC OTG HCD gintsts=0x%08x gintmsk=0x%08x\n",
--				 readl(hsotg->regs + GINTSTS),
--				 readl(hsotg->regs + GINTMSK));
-+				 dwc2_readl(hsotg->regs + GINTSTS),
-+				 dwc2_readl(hsotg->regs + GINTMSK));
- 		}
- 	}
- 
---- a/drivers/usb/dwc2/hcd_queue.c
-+++ b/drivers/usb/dwc2/hcd_queue.c
-@@ -115,7 +115,7 @@ static void dwc2_qh_init(struct dwc2_hso
- 		if (qh->ep_type == USB_ENDPOINT_XFER_INT)
- 			qh->interval = 8;
- #endif
--		hprt = readl(hsotg->regs + HPRT0);
-+		hprt = dwc2_readl(hsotg->regs + HPRT0);
- 		prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
- 		if (prtspd == HPRT0_SPD_HIGH_SPEED &&
- 		    (dev_speed == USB_SPEED_LOW ||
-@@ -593,9 +593,9 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *h
- 	if (status)
- 		return status;
- 	if (!hsotg->periodic_qh_count) {
--		intr_mask = readl(hsotg->regs + GINTMSK);
-+		intr_mask = dwc2_readl(hsotg->regs + GINTMSK);
- 		intr_mask |= GINTSTS_SOF;
--		writel(intr_mask, hsotg->regs + GINTMSK);
-+		dwc2_writel(intr_mask, hsotg->regs + GINTMSK);
- 	}
- 	hsotg->periodic_qh_count++;
- 
-@@ -630,9 +630,9 @@ void dwc2_hcd_qh_unlink(struct dwc2_hsot
- 	dwc2_deschedule_periodic(hsotg, qh);
- 	hsotg->periodic_qh_count--;
- 	if (!hsotg->periodic_qh_count) {
--		intr_mask = readl(hsotg->regs + GINTMSK);
-+		intr_mask = dwc2_readl(hsotg->regs + GINTMSK);
- 		intr_mask &= ~GINTSTS_SOF;
--		writel(intr_mask, hsotg->regs + GINTMSK);
-+		dwc2_writel(intr_mask, hsotg->regs + GINTMSK);
- 	}
- }
- 
diff --git a/target/linux/lantiq/patches-3.18/0043-gpio-stp-xway-fix-phy-mask.patch b/target/linux/lantiq/patches-3.18/0043-gpio-stp-xway-fix-phy-mask.patch
deleted file mode 100644
index d43cdf3d54..0000000000
--- a/target/linux/lantiq/patches-3.18/0043-gpio-stp-xway-fix-phy-mask.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 08b085a07efe12568d86dff064e6f089e2971744 Mon Sep 17 00:00:00 2001
-From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-Date: Mon, 25 May 2015 22:39:50 +0200
-Subject: gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
-
-0x3 only masks two bits, but three bits have to be allowed. This fixes
-GPHY0 LED2 (which is the highest bit of phy2) on my board.
-
-Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-Acked-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
---- a/drivers/gpio/gpio-stp-xway.c
-+++ b/drivers/gpio/gpio-stp-xway.c
-@@ -58,7 +58,7 @@
- #define XWAY_STP_ADSL_MASK	0x3
- 
- /* 2 groups of 3 bits can be driven by the phys */
--#define XWAY_STP_PHY_MASK	0x3
-+#define XWAY_STP_PHY_MASK	0x7
- #define XWAY_STP_PHY1_SHIFT	27
- #define XWAY_STP_PHY2_SHIFT	15
- 
diff --git a/target/linux/lantiq/patches-3.18/0100-lantiq-xrx200-enable-remove-crc.patch b/target/linux/lantiq/patches-3.18/0100-lantiq-xrx200-enable-remove-crc.patch
deleted file mode 100644
index 60a1937568..0000000000
--- a/target/linux/lantiq/patches-3.18/0100-lantiq-xrx200-enable-remove-crc.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -143,6 +143,7 @@
- #define PMAC_IPG_MASK		0xf
- #define PMAC_HD_CTL_AS		0x0008
- #define PMAC_HD_CTL_AC		0x0004
-+#define PMAC_HD_CTL_RC		0x0010
- #define PMAC_HD_CTL_RXSH	0x0040
- #define PMAC_HD_CTL_AST		0x0080
- #define PMAC_HD_CTL_RST		0x0100
-@@ -1502,12 +1503,12 @@ static void xrx200_hw_init(struct xrx200
- #ifdef SW_ROUTING
- 	/* enable status header, enable CRC */
- 	ltq_pmac_w32_mask(0,
--		PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC,
-+		PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
- 		PMAC_HD_CTL);
- #else
- 	/* disable status header, enable CRC */
- 	ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
--		PMAC_HD_CTL_AC,
-+		PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
- 		PMAC_HD_CTL);
- #endif
- 
diff --git a/target/linux/lantiq/patches-3.18/0101-mtd-split.patch b/target/linux/lantiq/patches-3.18/0101-mtd-split.patch
deleted file mode 100644
index 6152e0e211..0000000000
--- a/target/linux/lantiq/patches-3.18/0101-mtd-split.patch
+++ /dev/null
@@ -1,192 +0,0 @@
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,6 +1,6 @@
- obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
- 
--obj-y += vmmc.o tffs.o
-+obj-y += vmmc.o tffs.o mtd_split.o
- 
- obj-y += eth_mac.o
- obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/mtd_split.c
-@@ -0,0 +1,129 @@
-+#include <linux/magic.h>
-+#include <linux/root_dev.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#define ROOTFS_SPLIT_NAME "rootfs_data"
-+
-+struct squashfs_super_block {
-+	__le32 s_magic;
-+	__le32 pad0[9];
-+	__le64 bytes_used;
-+};
-+
-+static void split_brnimage_kernel(struct mtd_info *master, const char *name,
-+                                       int offset, int size)
-+{
-+	unsigned long buf[4];
-+	// Assume at most 2MB of kernel image
-+	unsigned long end = offset + (2 << 20);
-+	unsigned long part_size = offset + 0x400 - 12;
-+	size_t len;
-+	int ret;
-+
-+	if (strcmp(name, "firmware") != 0)
-+		return;
-+	while (part_size < end) {
-+		long size_min = part_size - 0x400 - 12 - offset;
-+		long size_max = part_size + 12 - offset;
-+		ret = mtd_read(master, part_size, 16, &len, (void *)buf);
-+		if (ret || len != 16)
-+			return;
-+
-+		if (le32_to_cpu(buf[0]) < size_min ||
-+				le32_to_cpu(buf[0]) > size_max) {
-+			part_size += 0x400;
-+			continue;
-+		}
-+
-+		if (le32_to_cpu(buf[3]) == SQUASHFS_MAGIC) {
-+			part_size += 12 - offset;
-+			__mtd_add_partition(master, "rootfs", offset + part_size,
-+			                            size - part_size, false);
-+			return;
-+		}
-+		part_size += 0x400;
-+	}
-+}
-+
-+static void split_eva_kernel(struct mtd_info *master, const char *name,
-+				int offset, int size)
-+{
-+#define EVA_MAGIC   0xfeed1281
-+	unsigned long magic = 0;
-+	unsigned long part_size = 0, p;
-+	size_t len;
-+	int ret;
-+
-+	if (strcmp(name, CONFIG_MTD_SPLIT_FIRMWARE_NAME) != 0)
-+		return;
-+
-+	ret = mtd_read(master, offset, 4, &len, (void *)&magic);
-+	if (ret || len != sizeof(magic))
-+		return;
-+
-+	if (le32_to_cpu(magic) != EVA_MAGIC)
-+		return;
-+
-+	ret = mtd_read(master, offset + 4, 4, &len, (void *)&part_size);
-+	if (ret || len != sizeof(part_size))
-+		return;
-+
-+	p = part_size = le32_to_cpu(part_size) + 0x18;
-+	p &= ~0xffff;
-+	p += 0x10000;
-+
-+	ret = mtd_read(master, offset + p, 4, &len, (void *)&magic);
-+	if (ret || len != sizeof(magic))
-+		return;
-+
-+	if (magic == SQUASHFS_MAGIC)
-+		part_size = p + 0x100;
-+	else
-+	        part_size = mtd_pad_erasesize(master, offset, len);
-+
-+	if (part_size + master->erasesize > size)
-+		return;
-+
-+	__mtd_add_partition(master, "rootfs", offset + part_size,
-+			    size - part_size, false);
-+}
-+
-+static void split_tplink_kernel(struct mtd_info *master, const char *name,
-+				int offset, int size)
-+{
-+#define TPLINK_MAGIC   0x00000002
-+	unsigned long magic = 0;
-+	unsigned long part_size = 0;
-+	size_t len;
-+	int ret;
-+
-+	if (strcmp(name, CONFIG_MTD_SPLIT_FIRMWARE_NAME) != 0)
-+		return;
-+
-+	ret = mtd_read(master, offset, 4, &len, (void *)&magic);
-+	if (ret || len != sizeof(magic))
-+		return;
-+
-+	if (le32_to_cpu(magic) != TPLINK_MAGIC)
-+		return;
-+
-+	ret = mtd_read(master, offset + 0x78, 4, &len, (void *)&part_size);
-+	if (ret || len != sizeof(part_size))
-+		return;
-+
-+	part_size = be32_to_cpu(part_size) + 0x200;
-+	if (part_size + master->erasesize > size)
-+		return;
-+
-+	__mtd_add_partition(master, "rootfs", offset + part_size,
-+			    size - part_size, false);
-+}
-+
-+void arch_split_mtd_part(struct mtd_info *master, const char *name,
-+				int offset, int size)
-+{
-+	split_tplink_kernel(master, name, offset, size);
-+	split_eva_kernel(master, name, offset, size);
-+	split_brnimage_kernel(master, name, offset, size);
-+}
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -89,12 +89,17 @@ extern void deregister_mtd_parser(struct
- int mtd_is_partition(const struct mtd_info *mtd);
- int mtd_add_partition(struct mtd_info *master, const char *name,
- 		      long long offset, long long length);
-+int __mtd_add_partition(struct mtd_info *master, const char *name,
-+		    long long offset, long long length, bool dup_check);
-+
- int mtd_del_partition(struct mtd_info *master, int partno);
- struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd);
- uint64_t mtdpart_get_offset(const struct mtd_info *mtd);
- uint64_t mtd_get_device_size(const struct mtd_info *mtd);
--extern void __weak arch_split_mtd_part(struct mtd_info *master,
--				       const char *name, int offset, int size);
-+void __weak arch_split_mtd_part(struct mtd_info *master,
-+ 				       const char *name, int offset, int size);
-+unsigned long
-+mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len);
- 
- int parse_mtd_partitions_by_type(struct mtd_info *master,
- 				 enum mtd_parser_type type,
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -628,7 +628,7 @@ out_register:
- }
- 
- 
--static int
-+int
- __mtd_add_partition(struct mtd_info *master, const char *name,
- 		    long long offset, long long length, bool dup_check)
- {
-@@ -749,7 +749,7 @@ run_parsers_by_type(struct mtd_part *sla
- 	return nr_parts;
- }
- 
--static inline unsigned long
-+unsigned long
- mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
- {
- 	unsigned long mask = mtd->erasesize - 1;
-@@ -819,7 +819,6 @@ static void split_uimage(struct mtd_info
- 		return;
- 
- 	len = be32_to_cpu(hdr.size) + 0x40;
--	len = mtd_pad_erasesize(master, part->offset, len);
- 	if (len + master->erasesize > part->mtd.size)
- 		return;
- 
diff --git a/target/linux/lantiq/patches-3.18/0150-lantiq-pinctrl-xway.patch b/target/linux/lantiq/patches-3.18/0150-lantiq-pinctrl-xway.patch
deleted file mode 100644
index 84adbe661f..0000000000
--- a/target/linux/lantiq/patches-3.18/0150-lantiq-pinctrl-xway.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -152,10 +152,10 @@ static const struct ltq_mfp_pin xway_mfp
- 	MFP_XWAY(GPIO41, GPIO,	NONE,	NONE,	NONE),
- 	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
- 	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
--	MFP_XWAY(GPIO44, GPIO,	NONE,	GPHY,	SIN),
-+	MFP_XWAY(GPIO44, GPIO,	MII,	SIN,	GPHY),
- 	MFP_XWAY(GPIO45, GPIO,	NONE,	GPHY,	SIN),
- 	MFP_XWAY(GPIO46, GPIO,	NONE,	NONE,	EXIN),
--	MFP_XWAY(GPIO47, GPIO,	NONE,	GPHY,	SIN),
-+	MFP_XWAY(GPIO47, GPIO,	MII,	GPHY,	SIN),
- 	MFP_XWAY(GPIO48, GPIO,	EBU,	NONE,	NONE),
- 	MFP_XWAY(GPIO49, GPIO,	EBU,	NONE,	NONE),
- 	MFP_XWAY(GPIO50, GPIO,	NONE,	NONE,	NONE),
diff --git a/target/linux/lantiq/patches-3.18/0151-lantiq-ifxmips_pcie-use-of.patch b/target/linux/lantiq/patches-3.18/0151-lantiq-ifxmips_pcie-use-of.patch
deleted file mode 100644
index 26a3a65142..0000000000
--- a/target/linux/lantiq/patches-3.18/0151-lantiq-ifxmips_pcie-use-of.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/pci/ifxmips_pcie.c
-+++ b/arch/mips/pci/ifxmips_pcie.c
-@@ -18,6 +18,8 @@
- #include <linux/pci_regs.h>
- #include <linux/module.h>
- 
-+#include <linux/of_platform.h>
-+
- #include "ifxmips_pcie.h"
- #include "ifxmips_pcie_reg.h"
- 
-@@ -1045,7 +1047,7 @@ pcie_rc_initialize(int pcie_port)
- 	return 0;
- }
- 
--static int __init ifx_pcie_bios_init(void)
-+static int __init ifx_pcie_bios_probe(struct platform_device *pdev)
- {
-     void __iomem *io_map_base;
-     int pcie_port;
-@@ -1083,6 +1085,30 @@ static int __init ifx_pcie_bios_init(voi
- 
-     return 0;
- }
-+
-+static const struct of_device_id ifxmips_pcie_match[] = {
-+        { .compatible = "lantiq,pcie-xrx200" },
-+        {},
-+};
-+MODULE_DEVICE_TABLE(of, ifxmips_pcie_match);
-+
-+static struct platform_driver ltq_pci_driver = {
-+        .probe = ifx_pcie_bios_probe,
-+        .driver = {
-+                .name = "pcie-xrx200",
-+                .owner = THIS_MODULE,
-+                .of_match_table = ifxmips_pcie_match,
-+        },
-+};
-+
-+int __init ifx_pcie_bios_init(void)
-+{
-+        int ret = platform_driver_register(&ltq_pci_driver);
-+        if (ret)
-+                pr_info("pcie-xrx200: Error registering platform driver!");
-+        return ret;
-+}
-+
- arch_initcall(ifx_pcie_bios_init);
- 
- MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/patches-3.18/0160-owrt-lantiq-multiple-flash.patch b/target/linux/lantiq/patches-3.18/0160-owrt-lantiq-multiple-flash.patch
deleted file mode 100644
index c09323104d..0000000000
--- a/target/linux/lantiq/patches-3.18/0160-owrt-lantiq-multiple-flash.patch
+++ /dev/null
@@ -1,217 +0,0 @@
---- a/drivers/mtd/maps/lantiq-flash.c
-+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -19,6 +19,7 @@
- #include <linux/mtd/cfi.h>
- #include <linux/platform_device.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/mtd/concat.h>
- #include <linux/of.h>
- 
- #include <lantiq_soc.h>
-@@ -38,10 +39,12 @@ enum {
- 	LTQ_NOR_NORMAL
- };
- 
-+#define MAX_RESOURCES		4
-+
- struct ltq_mtd {
--	struct resource *res;
--	struct mtd_info *mtd;
--	struct map_info *map;
-+	struct mtd_info *mtd[MAX_RESOURCES];
-+	struct mtd_info	*cmtd;
-+	struct map_info map[MAX_RESOURCES];
- };
- 
- static const char ltq_map_name[] = "ltq_nor";
-@@ -109,12 +112,44 @@ ltq_copy_to(struct map_info *map, unsign
- }
- 
- static int
-+ltq_mtd_remove(struct platform_device *pdev)
-+{
-+	struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
-+	int i;
-+
-+	if (ltq_mtd == NULL)
-+		return 0;
-+
-+	if (ltq_mtd->cmtd) {
-+		mtd_device_unregister(ltq_mtd->cmtd);
-+		if (ltq_mtd->cmtd != ltq_mtd->mtd[0])
-+			mtd_concat_destroy(ltq_mtd->cmtd);
-+	}
-+
-+	for (i = 0; i < MAX_RESOURCES; i++) {
-+		if (ltq_mtd->mtd[i] != NULL)
-+			map_destroy(ltq_mtd->mtd[i]);
-+	}
-+
-+	kfree(ltq_mtd);
-+
-+	return 0;
-+}
-+
-+static int
- ltq_mtd_probe(struct platform_device *pdev)
- {
- 	struct mtd_part_parser_data ppdata;
- 	struct ltq_mtd *ltq_mtd;
- 	struct cfi_private *cfi;
--	int err;
-+	int err = 0;
-+	int i;
-+	int devices_found = 0;
-+
-+	static const char *rom_probe_types[] = {
-+		"cfi_probe", "jedec_probe", NULL
-+	};
-+	const char **type;
- 
- 	if (of_machine_is_compatible("lantiq,falcon") &&
- 			(ltq_boot_select() != BS_FLASH)) {
-@@ -128,76 +163,88 @@ ltq_mtd_probe(struct platform_device *pd
- 
- 	platform_set_drvdata(pdev, ltq_mtd);
- 
--	ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	if (!ltq_mtd->res) {
--		dev_err(&pdev->dev, "failed to get memory resource\n");
--		return -ENOENT;
-+	for (i = 0; i < pdev->num_resources; i++) {
-+		printk(KERN_NOTICE "lantiq nor flash device: %.8llx at %.8llx\n",
-+		       (unsigned long long)resource_size(&pdev->resource[i]),
-+		       (unsigned long long)pdev->resource[i].start);
-+	
-+		if (!devm_request_mem_region(&pdev->dev,
-+			pdev->resource[i].start,
-+			resource_size(&pdev->resource[i]),
-+			dev_name(&pdev->dev))) {
-+			dev_err(&pdev->dev, "Could not reserve memory region\n");
-+			return -ENOMEM;
-+		}
-+
-+		ltq_mtd->map[i].name = ltq_map_name;
-+		ltq_mtd->map[i].bankwidth = 2;
-+		ltq_mtd->map[i].read = ltq_read16;
-+		ltq_mtd->map[i].write = ltq_write16;
-+		ltq_mtd->map[i].copy_from = ltq_copy_from;
-+		ltq_mtd->map[i].copy_to = ltq_copy_to;
-+
-+		if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
-+			ltq_mtd->map[i].phys = NO_XIP;
-+		else
-+			ltq_mtd->map[i].phys = pdev->resource[i].start;
-+		ltq_mtd->map[i].size = resource_size(&pdev->resource[i]);
-+		ltq_mtd->map[i].virt = devm_ioremap(&pdev->dev, pdev->resource[i].start,
-+						 ltq_mtd->map[i].size);
-+		if (IS_ERR(ltq_mtd->map[i].virt))
-+			return PTR_ERR(ltq_mtd->map[i].virt);
-+
-+		if (ltq_mtd->map[i].virt == NULL) {
-+			dev_err(&pdev->dev, "Failed to ioremap flash region\n");
-+			err = PTR_ERR(ltq_mtd->map[i].virt);
-+			goto err_out;
-+		}
-+
-+		ltq_mtd->map[i].map_priv_1 = LTQ_NOR_PROBING;
-+		for (type = rom_probe_types; !ltq_mtd->mtd[i] && *type; type++)
-+			ltq_mtd->mtd[i] = do_map_probe(*type, &ltq_mtd->map[i]);
-+		ltq_mtd->map[i].map_priv_1 = LTQ_NOR_NORMAL;
-+
-+		if (!ltq_mtd->mtd[i]) {
-+			dev_err(&pdev->dev, "probing failed\n");
-+			return -ENXIO;
-+		} else {
-+			devices_found++;
-+		}
-+
-+		ltq_mtd->mtd[i]->owner = THIS_MODULE;
-+		ltq_mtd->mtd[i]->dev.parent = &pdev->dev;
-+
-+		cfi = ltq_mtd->map[i].fldrv_priv;
-+		cfi->addr_unlock1 ^= 1;
-+		cfi->addr_unlock2 ^= 1;
- 	}
- 
--	ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info),
--				    GFP_KERNEL);
--	if (!ltq_mtd->map)
--		return -ENOMEM;
--
--	if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
--		ltq_mtd->map->phys = NO_XIP;
--	else
--		ltq_mtd->map->phys = ltq_mtd->res->start;
--	ltq_mtd->res->start;
--	ltq_mtd->map->size = resource_size(ltq_mtd->res);
--	ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
--	if (IS_ERR(ltq_mtd->map->virt))
--		return PTR_ERR(ltq_mtd->map->virt);
--
--	ltq_mtd->map->name = ltq_map_name;
--	ltq_mtd->map->bankwidth = 2;
--	ltq_mtd->map->read = ltq_read16;
--	ltq_mtd->map->write = ltq_write16;
--	ltq_mtd->map->copy_from = ltq_copy_from;
--	ltq_mtd->map->copy_to = ltq_copy_to;
--
--	ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
--	ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
--	ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
--
--	if (!ltq_mtd->mtd) {
--		dev_err(&pdev->dev, "probing failed\n");
--		return -ENXIO;
--	}
--
--	ltq_mtd->mtd->owner = THIS_MODULE;
--
--	cfi = ltq_mtd->map->fldrv_priv;
--	cfi->addr_unlock1 ^= 1;
--	cfi->addr_unlock2 ^= 1;
-+	if (devices_found == 1) {
-+		ltq_mtd->cmtd = ltq_mtd->mtd[0];
-+	} else if (devices_found > 1) {
-+		/*
-+		 * We detected multiple devices. Concatenate them together.
-+		 */
-+		ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev));
-+		if (ltq_mtd->cmtd == NULL)
-+			err = -ENXIO;
-+	}
- 
- 	ppdata.of_node = pdev->dev.of_node;
--	err = mtd_device_parse_register(ltq_mtd->mtd, ltq_probe_types,
-+	err = mtd_device_parse_register(ltq_mtd->cmtd, ltq_probe_types,
- 					&ppdata, NULL, 0);
- 	if (err) {
- 		dev_err(&pdev->dev, "failed to add partitions\n");
--		goto err_destroy;
-+		goto err_out;
- 	}
- 
- 	return 0;
- 
--err_destroy:
--	map_destroy(ltq_mtd->mtd);
-+err_out:
-+	ltq_mtd_remove(pdev);
- 	return err;
- }
- 
--static int
--ltq_mtd_remove(struct platform_device *pdev)
--{
--	struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
--
--	if (ltq_mtd && ltq_mtd->mtd) {
--		mtd_device_unregister(ltq_mtd->mtd);
--		map_destroy(ltq_mtd->mtd);
--	}
--	return 0;
--}
--
- static const struct of_device_id ltq_mtd_match[] = {
- 	{ .compatible = "lantiq,nor" },
- 	{},
diff --git a/target/linux/lantiq/patches-3.18/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch b/target/linux/lantiq/patches-3.18/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch
deleted file mode 100644
index d153c521d3..0000000000
--- a/target/linux/lantiq/patches-3.18/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -39,7 +39,7 @@
- /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */
- 
- // debugging, turns off buffer write mode if set to 1
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
- 
- /* Intel chips */
- #define I82802AB	0x00ad