diff options
| author | Yushi Nishida <kyro2man@gmx.net> | 2020-04-03 19:21:06 +0200 |
|---|---|---|
| committer | Alexander Couzens <lynxis@fe80.eu> | 2020-05-16 04:37:55 +0200 |
| commit | 78bebe680f67e8967c2baad8a5c07035d431f9d5 (patch) | |
| tree | a22a4eb714b470d505f31f65ec95e163f04130d5 /target/linux/lantiq/xrx200 | |
| parent | 8097fd4d5f7f0e995db2a80aca03d8258907f85b (diff) | |
| download | upstream-78bebe680f67e8967c2baad8a5c07035d431f9d5.tar.gz upstream-78bebe680f67e8967c2baad8a5c07035d431f9d5.tar.bz2 upstream-78bebe680f67e8967c2baad8a5c07035d431f9d5.zip | |
lantiq/xrx200: add support for the Fritzbox 7360v2
This commit adds support for the Fritzbox 7360v2
CPU: VR9 500MHz Cores: 2
RAM: 128 MB
NOR-Flash: 32 MB
WLAN: AR9287-BL1A
DECT is not working.
Thanks Sebastian Ortwein for adding 7360SL.
The dts file is derived from avm_fritz7360sl.dts.
Firmware can be flashed with this method:
1.) Set your client IP to 192.168.178.2
2.) Power on your your Fritzbox and connect to 192.168.178.1
via ftp in the first 5 seconds.
3.) login with adam2/adam2
4.) type into the ftp prompt:
passive
binary
debug 1
quote MEDIA FLSH // (not FLASH)
put openwrt-lantiq-xrx200-avm_fritz7360v2-squashfs-sysupgrade.bin mtd1
// using the correct location for the squashfs-sysupgrade-firmware.bin
5.) wait till red light flashing turns off.
6.) type: exit
Run tested with kernel 4.19 and 5.4 on Fritzbox 7360 V2.
Issue:
Ethernet speed is slow, (iperf between a Xiaomi mir3g
and this router results in <80Mbits throughput
with a wired cable when using the gbit ports.)
Signed-off-by: Yushi Nishida <kyro2man@gmx.net>
Diffstat (limited to 'target/linux/lantiq/xrx200')
| -rwxr-xr-x | target/linux/lantiq/xrx200/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom | 3 |
2 files changed, 3 insertions, 1 deletions
diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network index f39898263d..790fae58c9 100755 --- a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network @@ -39,6 +39,7 @@ lantiq_setup_interfaces() avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ avm,fritz7360sl|\ + avm,fritz7360v2|\ avm,fritz7362sl) ucidef_add_switch "switch0" \ "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0" diff --git a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index 6fee72ea8d..4b6d0bf13a 100644 --- a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -16,7 +16,8 @@ case "$FIRMWARE" in avm,fritz7362sl) caldata_extract_reverse "urlader" 0x1541 0x440 ;; - avm,fritz7360sl) + avm,fritz7360sl|\ + avm,fritz7360v2) caldata_extract "urlader" 0x985 0x1000 ;; avm,fritz7412) |