diff options
author | Felix Fietkau <nbd@openwrt.org> | 2016-01-18 11:40:19 +0000 |
---|---|---|
committer | Felix Fietkau <nbd@openwrt.org> | 2016-01-18 11:40:19 +0000 |
commit | f577cb25c09daad670755b9b46622258cf999421 (patch) | |
tree | ee7361facfb1c544bab629f3fe11376b71f3d4d7 /target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch | |
parent | e0bfd2529592313a163fcae4d99351d69dc637bf (diff) | |
download | upstream-f577cb25c09daad670755b9b46622258cf999421.tar.gz upstream-f577cb25c09daad670755b9b46622258cf999421.tar.bz2 upstream-f577cb25c09daad670755b9b46622258cf999421.zip |
lantiq: Add support for linux 4.4
The following patches were dropped because they are already applied
upstream:
- 0038-MIPS-lantiq-fpi-on-ar9.patch
- 0039-MIPS-lantiq-initialize-usb-on-boot.patch
- 0042-USB-DWC2-big-endian-support.patch
- 0043-gpio-stp-xway-fix-phy-mask.patch
All other patches were simply refreshed, except the following:
- 0001-MIPS-lantiq-add-pcie-driver.patch
Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled
some PMU gates for the vrx200 / VR9 SoCs) were removed since the
upstream kernel disables unused PMU gates automatically (since
95135bfa7ead1becc2879230f72583dde2b71a0c
"MIPS: Lantiq: Deactivate most of the devices by default").
- 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
Since OpenWrt commit 55ba20afcc2fe785146316e5be2c2473cb329885 drivers
should use of_get_mac_address(). of_get_mac_address_mtd is not
available for drivers anymore since it's called automatically within
of_get_mac_address().
- 0028-NET-lantiq-various-etop-fixes.patch
Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
While refreshing the kernel configuration SPI support had to be moved to
config-4.4 because otherwise M25P80 was disabled.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48307
Diffstat (limited to 'target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch')
-rw-r--r-- | target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch b/target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch new file mode 100644 index 0000000000..a5f92ee58e --- /dev/null +++ b/target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch @@ -0,0 +1,28 @@ +From 57b588c950b7e04e0f22393ad439299ba4fda9c3 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Thu, 26 Nov 2015 11:00:09 +0100 +Subject: [PATCH] pinctrl/lantiq: Fix GPIO Setup of GPIO Port3 + +Some special handling of GPIO Port 3 is needed because of +some hardware thingofabob. + +Signed-off-by: John Crispin <blogic@openwrt.org> +Signed-off-by: Martin Schiller <mschiller@tdt.de> +Signed-off-by: Linus Walleij <linus.walleij@linaro.org> +--- + drivers/pinctrl/pinctrl-xway.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/pinctrl/pinctrl-xway.c ++++ b/drivers/pinctrl/pinctrl-xway.c +@@ -1570,6 +1570,10 @@ static int xway_gpio_dir_out(struct gpio + { + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + ++ if (PORT(pin) == PORT3) ++ gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin)); ++ else ++ gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin)); + gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); + xway_gpio_set(chip, pin, val); + |