lantiq: Add support for linux 4.4

The following patches were dropped because they are already applied
upstream:
- 0038-MIPS-lantiq-fpi-on-ar9.patch
- 0039-MIPS-lantiq-initialize-usb-on-boot.patch
- 0042-USB-DWC2-big-endian-support.patch
- 0043-gpio-stp-xway-fix-phy-mask.patch

All other patches were simply refreshed, except the following:
- 0001-MIPS-lantiq-add-pcie-driver.patch
  Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled
  some PMU gates for the vrx200 / VR9 SoCs) were removed since the
  upstream kernel disables unused PMU gates automatically (since
  95135bfa7ead1becc2879230f72583dde2b71a0c
  "MIPS: Lantiq: Deactivate most of the devices by default").
- 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
  Since OpenWrt commit 55ba20afcc2fe785146316e5be2c2473cb329885 drivers
  should use of_get_mac_address(). of_get_mac_address_mtd is not
  available for drivers anymore since it's called automatically within
  of_get_mac_address().
- 0028-NET-lantiq-various-etop-fixes.patch
  Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch

While refreshing the kernel configuration SPI support had to be moved to
config-4.4 because otherwise M25P80 was disabled.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48307

1 files changed, 46 insertions, 0 deletions

diff --git a/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch
new file mode 100644
index 0000000000..ea3e48c3dd
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch
@@ -0,0 +1,46 @@
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -145,6 +145,34 @@ static int __dwc2_lowlevel_hw_enable(str
+ 	return ret;
+ }
+ 
++static const struct dwc2_core_params params_ltq = {
++	.otg_cap			= 2,	/* non-HNP/non-SRP */
++	.otg_ver			= -1,
++	.dma_enable			= -1,
++	.dma_desc_enable		= -1,
++	.speed				= -1,
++	.enable_dynamic_fifo		= -1,
++	.en_multiple_tx_fifo		= -1,
++	.host_rx_fifo_size		= 288,	/* 288 DWORDs */
++	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
++	.host_perio_tx_fifo_size	= 96,	/* 96 DWORDs */
++	.max_transfer_size		= -1,
++	.max_packet_count		= 511,
++	.host_channels			= -1,
++	.phy_type			= -1,
++	.phy_utmi_width			= -1,
++	.phy_ulpi_ddr			= -1,
++	.phy_ulpi_ext_vbus		= -1,
++	.i2c_enable			= -1,
++	.ulpi_fs_ls			= -1,
++	.host_support_fs_ls_low_power	= -1,
++	.host_ls_low_power_phy_clk	= -1,
++	.ts_dline			= -1,
++	.reload_ctl			= -1,
++	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT,
++	.uframe_sched			= -1,
++};
++
+ /**
+  * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
+  * @hsotg: The driver state
+@@ -310,6 +338,8 @@ static int dwc2_driver_remove(struct pla
+ static const struct of_device_id dwc2_of_match_table[] = {
+ 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
+ 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
++	{ .compatible = "lantiq,ifxhcd-arx100-dwc2", .data = &params_ltq },
++	{ .compatible = "lantiq,ifxhcd-xrx200-dwc2", .data = &params_ltq },
+ 	{ .compatible = "snps,dwc2", .data = NULL },
+ 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
+ 	{},