lantiq: kernel 4.14: copy patches, config and dts files

This just copies the patches, configuration and dts files into the
directories hich are used for kernel 4.14.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 294 insertions, 0 deletions

diff --git a/target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
new file mode 100644
index 0000000000..e915277599
--- /dev/null
+++ b/target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
@@ -0,0 +1,294 @@
+From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 7 Aug 2014 18:15:36 +0200
+Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/phy/Kconfig  |    5 +
+ drivers/net/phy/Makefile |    1 +
+ drivers/net/phy/lantiq.c |  231 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 237 insertions(+)
+ create mode 100644 drivers/net/phy/lantiq.c
+
+--- a/drivers/net/phy/intel-xway.c
++++ b/drivers/net/phy/intel-xway.c
+@@ -152,6 +152,51 @@
+ #define PHY_ID_PHY11G_VR9		0xD565A409
+ #define PHY_ID_PHY22F_VR9		0xD565A419
+ 
++#if IS_ENABLED(CONFIG_OF_MDIO)
++static int vr9_gphy_of_reg_init(struct phy_device *phydev)
++{
++	u32 tmp;
++
++	/* store the led values if one was passed by the devicetree */
++	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledch", &tmp))
++		phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCH, MDIO_MMD_VEND2, tmp);
++
++	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledcl", &tmp))
++		phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCL, MDIO_MMD_VEND2, tmp);
++
++	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0h", &tmp))
++		phy_write_mmd_indirect(phydev, XWAY_MMD_LED0H, MDIO_MMD_VEND2, tmp);
++
++	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0l", &tmp))
++		phy_write_mmd_indirect(phydev, XWAY_MMD_LED0L, MDIO_MMD_VEND2, tmp);
++
++	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1h", &tmp))
++		phy_write_mmd_indirect(phydev, XWAY_MMD_LED1H, MDIO_MMD_VEND2, tmp);
++
++	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1l", &tmp))
++		phy_write_mmd_indirect(phydev, XWAY_MMD_LED1L, MDIO_MMD_VEND2, tmp);
++
++	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2h", &tmp))
++		phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp);
++
++	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2l", &tmp))
++		phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp);
++
++	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3h", &tmp))
++		phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp);
++
++	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3l", &tmp))
++		phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp);
++
++	return 0;
++}
++#else
++static int vr9_gphy_of_reg_init(struct phy_device *phydev)
++{
++	return 0;
++}
++#endif /* CONFIG_OF_MDIO */
++
+ static int xway_gphy_config_init(struct phy_device *phydev)
+ {
+ 	int err;
+@@ -190,6 +235,7 @@ static int xway_gphy_config_init(struct
+ 	phy_write_mmd_indirect(phydev, XWAY_MMD_LED2H, MDIO_MMD_VEND2, ledxh);
+ 	phy_write_mmd_indirect(phydev, XWAY_MMD_LED2L, MDIO_MMD_VEND2, ledxl);
+ 
++	vr9_gphy_of_reg_init(phydev);
+ 	return 0;
+ }
+ 
+--- /dev/null
++++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt
+@@ -0,0 +1,216 @@
++Lanitq PHY binding
++============================================
++
++This devicetree binding controls the lantiq ethernet phys led functionality.
++
++Example:
++	mdio@0 {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		compatible = "lantiq,xrx200-mdio";
++			phy5: ethernet-phy@5 {
++			reg = <0x1>;
++			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
++		};
++		phy11: ethernet-phy@11 {
++			reg = <0x11>;
++			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++			lantiq,led2h = <0x00>;
++			lantiq,led2l = <0x03>;
++		};
++		phy12: ethernet-phy@12 {
++			reg = <0x12>;
++			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++			lantiq,led1h = <0x00>;
++			lantiq,led1l = <0x03>;
++		};
++		phy13: ethernet-phy@13 {
++			reg = <0x13>;
++			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++			lantiq,led2h = <0x00>;
++			lantiq,led2l = <0x03>;
++		};
++		phy14: ethernet-phy@14 {
++			reg = <0x14>;
++			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++			lantiq,led1h = <0x00>;
++			lantiq,led1l = <0x03>;
++		};
++	};
++
++Register Description
++============================================
++
++LEDCH:
++
++Name	Hardware Reset Value
++LEDCH	0x00C5
++
++| 15 |    |    |    |    |    |    |  8 |
++=========================================
++|		RES			|
++=========================================
++
++|  7 |    |    |    |    |    |    |  0 |
++=========================================
++|   FBF   |   SBF   |RES |     NACS     |
++=========================================
++
++Field	Bits	Type	Description
++FBF	7:6	RW	Fast Blink Frequency
++			---
++			0x0 (00b) F02HZ 2 Hz blinking frequency
++			0x1 (01b) F04HZ 4 Hz blinking frequency
++			0x2 (10b) F08HZ 8 Hz blinking frequency
++			0x3 (11b) F16HZ 16 Hz blinking frequency
++
++SBF	5:4	RW	Slow Blink Frequency
++			---
++			0x0 (00b) F02HZ 2 Hz blinking frequency
++			0x1 (01b) F04HZ 4 Hz blinking frequency
++			0x2 (10b) F08HZ 8 Hz blinking frequency
++			0x3 (11b) F16HZ 16 Hz blinking frequency
++
++NACS	2:0	RW	Inverse of Scan Function
++			---
++			0x0 (000b) NONE No Function
++			0x1 (001b) LINK Complex function enabled when link is up
++			0x2 (010b) PDOWN Complex function enabled when device is powered-down
++			0x3 (011b) EEE Complex function enabled when device is in EEE mode
++			0x4 (100b) ANEG Complex function enabled when auto-negotiation is running
++			0x5 (101b) ABIST Complex function enabled when analog self-test is running
++			0x6 (110b) CDIAG Complex function enabled when cable diagnostics are running
++			0x7 (111b) TEST Complex function enabled when test mode is running
++
++LEDCL:
++
++Name	Hardware Reset Value
++LEDCL	0x0067
++
++| 15 |    |    |    |    |    |    |  8 |
++=========================================
++|		RES			|
++=========================================
++
++|  7 |    |    |    |    |    |    |  0 |
++=========================================
++|RES |     SCAN     |RES |    CBLINK    |
++=========================================
++
++Field	Bits	Type	Description
++SCAN	6:4	RW	Complex Scan Configuration
++			---
++			000 B NONE No Function
++			001 B LINK Complex function enabled when link is up
++			010 B PDOWN Complex function enabled when device is powered-down
++			011 B EEE Complex function enabled when device is in EEE mode
++			100 B ANEG Complex function enabled when auto-negotiation is running
++			101 B ABIST Complex function enabled when analog self-test is running
++			110 B CDIAG Complex function enabled when cable diagnostics are running
++			111 B TEST Complex function enabled when test mode is running
++
++CBLINK	2:0	RW	Complex Blinking Configuration
++			---
++			000 B NONE No Function
++			001 B LINK Complex function enabled when link is up
++			010 B PDOWN Complex function enabled when device is powered-down
++			011 B EEE Complex function enabled when device is in EEE mode
++			100 B ANEG Complex function enabled when auto-negotiation is running
++			101 B ABIST Complex function enabled when analog self-test is running
++			110 B CDIAG Complex function enabled when cable diagnostics are running
++			111 B TEST Complex function enabled when test mode is running
++
++LEDxH:
++
++Name	Hardware Reset Value
++LED0H	0x0070
++LED1H	0x0020
++LED2H	0x0040
++LED3H	0x0040
++
++| 15 |    |    |    |    |    |    |  8 |
++=========================================
++|		RES			|
++=========================================
++
++|  7 |    |    |    |    |    |    |  0 |
++=========================================
++|        CON        |       BLINKF      |
++=========================================
++
++Field	Bits	Type	Description
++CON	7:4	RW	Constant On Configuration
++			---
++			0x0 (0000b) NONE LED does not light up constantly
++			0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s
++			0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s
++			0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s
++			0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s
++			0x5 (0101b) LINK10_0 LED is on when link is 10/1000 Mbit/s
++			0x6 (0110b) LINK100X LED is on when link is 100/1000 Mbit/s
++			0x7 (0111b) LINK10XX LED is on when link is 10/100/1000 Mbit/s
++			0x8 (1000b) PDOWN LED is on when device is powered-down
++			0x9 (1001b) EEE LED is on when device is in EEE mode
++			0xA (1010b) ANEG LED is on when auto-negotiation is running
++			0xB (1011b) ABIST LED is on when analog self-test is running
++			0xC (1100b) CDIAG LED is on when cable diagnostics are running
++
++BLINKF	3:0	RW	Fast Blinking Configuration
++			---
++			0x0 (0000b) NONE No Blinking
++			0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
++			0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
++			0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
++			0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
++			0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
++			0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
++			0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
++			0x8 (1000b) PDOWN Blink when device is powered-down
++			0x9 (1001b) EEE Blink when device is in EEE mode
++			0xA (1010b) ANEG Blink when auto-negotiation is running
++			0xB (1011b) ABIST Blink when analog self-test is running
++			0xC (1100b) CDIAG Blink when cable diagnostics are running
++
++LEDxL:
++
++Name	Hardware Reset Value
++LED0L	0x0003
++LED1L	0x0000
++LED2L	0x0000
++LED3L	0x0020
++
++| 15 |    |    |    |    |    |    |  8 |
++=========================================
++|		RES			|
++=========================================
++
++|  7 |    |    |    |    |    |    |  0 |
++=========================================
++|      BLINKS       |       PULSE       |
++=========================================
++
++Field	Bits	Type	Description
++BLINKS	7:4	RW	Slow Blinkin Configuration
++			---
++			0x0 (0000b) NONE No Blinking
++			0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
++			0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
++			0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
++			0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
++			0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
++			0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
++			0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
++			0x8 (1000b) PDOWN Blink when device is powered-down
++			0x9 (1001b) EEE Blink when device is in EEE mode
++			0xA (1010b) ANEG Blink when auto-negotiation is running
++			0xB (1011b) ABIST Blink when analog self-test is running
++			0xC (1100b) CDIAG Blink when cable diagnostics are runningning
++
++PULSE	3:0	RW	Pulsing Configuration
++			The pulse field is a mask field by which certain events can be combined
++			---
++			0x0 (0000b) NONE No pulsing
++			0x1 (0001b) TXACT Transmit activity
++			0x2 (0010b) RXACT Receive activity
++			0x4 (0100b) COL Collision
++			0x8 (1000b) RES Reserved