lantiq: remove 3.18 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47774

1 files changed, 0 insertions, 46 deletions

diff --git a/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch
deleted file mode 100644
index 2d9cb0f63f..0000000000
--- a/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -106,6 +106,34 @@ static const struct dwc2_core_params par
- 	.uframe_sched			= -1,
- };
- 
-+static const struct dwc2_core_params params_ltq = {
-+	.otg_cap			= 2,	/* non-HNP/non-SRP */
-+	.otg_ver			= -1,
-+	.dma_enable			= -1,
-+	.dma_desc_enable		= -1,
-+	.speed				= -1,
-+	.enable_dynamic_fifo		= -1,
-+	.en_multiple_tx_fifo		= -1,
-+	.host_rx_fifo_size		= 288,	/* 288 DWORDs */
-+	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
-+	.host_perio_tx_fifo_size	= 96,	/* 96 DWORDs */
-+	.max_transfer_size		= -1,
-+	.max_packet_count		= 511,
-+	.host_channels			= -1,
-+	.phy_type			= -1,
-+	.phy_utmi_width			= -1,
-+	.phy_ulpi_ddr			= -1,
-+	.phy_ulpi_ext_vbus		= -1,
-+	.i2c_enable			= -1,
-+	.ulpi_fs_ls			= -1,
-+	.host_support_fs_ls_low_power	= -1,
-+	.host_ls_low_power_phy_clk	= -1,
-+	.ts_dline			= -1,
-+	.reload_ctl			= -1,
-+	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT,
-+	.uframe_sched			= -1,
-+};
-+
- /**
-  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
-  * DWC_otg driver
-@@ -129,6 +157,8 @@ static int dwc2_driver_remove(struct pla
- static const struct of_device_id dwc2_of_match_table[] = {
- 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
- 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
-+	{ .compatible = "lantiq,ifxhcd-arx100-dwc2", .data = &params_ltq },
-+	{ .compatible = "lantiq,ifxhcd-xrx200-dwc2", .data = &params_ltq },
- 	{ .compatible = "snps,dwc2", .data = NULL },
- 	{},
- };