lantiq: make dts files and kernel config kernel version specific

Move the devicetree source files to a kernel specific directory in
preparation of adding kernel 4.14 support.

Rename the subtarget kernel config files to match a specific kernel
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>

74 files changed, 0 insertions, 11286 deletions

diff --git a/target/linux/lantiq/dts/ACMP252.dts b/target/linux/lantiq/dts/ACMP252.dts
deleted file mode 100644
index 7294720117..0000000000
--- a/target/linux/lantiq/dts/ACMP252.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-/ {
-	compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube";
-	model = "AudioCodes MediaPack MP-252";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x0 0x20000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "uboot_env";
-						reg = <0x20000 0x20000>;
-					};
-
-					partition@40000 {
-						label = "boardconfig";
-						reg = <0x40000 0x60000>;
-						read-only;
-					};
-
-					partition@a0000 {
-						label = "firmware";
-						reg = <0xa0000 0xf20000>;
-					};
-
-					partition@fc0000 {
-						label = "sysconfig";
-						reg = <0xfc0000 0x40000>;
-					};
-
-					partition@0x1000000 {
-						label = "rootfs_data";
-						reg = <0x1000000 0x1000000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-				};
-				pci {
-					lantiq,groups = "gnt1", "req1";
-					lantiq,function = "pci";
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		etop@E180000 {
-			phy-mode = "rmii";
-		};
-
-		pci@E105400 {
-			status = "okay";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/ALL0333CJ.dts b/target/linux/lantiq/dts/ALL0333CJ.dts
deleted file mode 100644
index 16c5facb35..0000000000
--- a/target/linux/lantiq/dts/ALL0333CJ.dts
+++ /dev/null
@@ -1,120 +0,0 @@
-/dts-v1/;
-
-#include "amazonse.dtsi"
-
-/ {
-	compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase";
-	model = "Allnet ALL0333CJ DSL Modem";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-
-		aliases {
-			led-boot = &power;
-			led-failsafe = &power;
-			led-running = &power;
-
-			led-dsl = &dsl;
-			led-internet = &online_green;
-		};
-
-	};
-
-	memory@0 {
-		reg = <0x0 0x1000000>;
-	};
-
-	fpi@b0000000 {
-		etop@E180000 {
-			phy-mode = "mii";
-		};
-	};
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				asc {
-					lantiq,groups = "asc";
-					lantiq,function = "asc";
-				};
-				keys_in {
-					lantiq,pins = "io0",/* "io25", */"io29";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <1>;
-				};
-			};
-		};
-
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x400000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>;
-						read-only;
-					};
-
-					partition@10000 {
-						label = "firmware";
-						reg = <0x10000 0x3ef200>;
-					};
-
-					partition@3ff200 {
-						label = "uboot_env";
-						reg = <0x3ff200 0xc00>;
-						read-only;
-					};
-
-					partition@3ffe00 {
-						label = "dummy_bits";
-						reg = <0x3ffe00 0x200>;
-						read-only;
-					};
-				};
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		/* power led: red=off, green=on */
-		power: power {
-			label = "all0333cj:green:power";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		lan: lan {
-			label = "all0333cj:green:lan";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-		};
-
-		dsl: dsl {
-			label = "all0333cj:green:dsl";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-		};
-
-		online_green: online {
-			label = "all0333cj:green:online";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-		};
-		online_red {
-			label = "all0333cj:red:online";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV4510PW.dts b/target/linux/lantiq/dts/ARV4510PW.dts
deleted file mode 100644
index 4720b57dd3..0000000000
--- a/target/linux/lantiq/dts/ARV4510PW.dts
+++ /dev/null
@@ -1,232 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv4510pw", "lantiq,xway", "lantiq,danube";
-	model = "Wippies, Elisa";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power2;
-		led-running = &power;
-
-		led-dsl = &adsl;
-		led-internet = &internet;
-		led-usb = &usb;
-		led-usb2 = &usb2;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x1000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				lantiq,noxip;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x40000>;
-						read-only;
-					};
-
-					partition@40000 {
-						label = "uboot_env";
-						reg = <0x40000 0x20000>;
-						read-only;
-					};
-
-					partition@60000 {
-						label = "firmware";
-						reg = <0x60000 0xfa0000>;
-					};
-				};
-			};
-		};
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				ebu {
-					lantiq,groups = "ebu a23";
-					lantiq,function = "ebu";
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				exin {
-					lantiq,groups = "exin1", "exin2";
-					lantiq,function = "exin";
-					lantiq,output = <0>;
-				};
-				pci_in {
-					lantiq,groups = "req1", "req2";
-					lantiq,function = "pci";
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1", "gnt2";
-					lantiq,function = "pci";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				buttons {
-					lantiq,pins = "io3", "io14";
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-			};
-		};
-
-		gpios: stp@E100BB0 {
-			status = "okay";
-			lantiq,groups = <0x7>;
-		};
-
-		etop@E180000 {
-			phy-mode = "rmii";
-		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			interrupt-map = <
-				0x6000 0 0 1 &icu0 135
-				0x7800 0 0 1 &icu0 66
-				0x7800 0 0 2 &icu0 66
-				0x7800 0 0 3 &icu0 66
-			>;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0x7>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power: power {
-			label = "power";
-			gpios = <&gpios 21 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		power2: power2 {
-			label = "power2";
-			gpios = <&gpios 20 GPIO_ACTIVE_HIGH>;
-		};
-		lan1 {
-			label = "lan1";
-			gpios = <&gpios 19 GPIO_ACTIVE_HIGH>;
-		};
-		lan2 {
-			label = "lan2";
-			gpios = <&gpios 18 GPIO_ACTIVE_HIGH>;
-		};
-		lan3 {
-			label = "lan3";
-			gpios = <&gpios 17 GPIO_ACTIVE_HIGH>;
-		};
-		lan4 {
-			label = "lan4";
-			gpios = <&gpios 16 GPIO_ACTIVE_HIGH>;
-		};
-		wifi: wifi {
-			label = "wifi";
-			gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
-		};
-		adsl: adsl {
-			label = "adsl";
-			gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
-		};
-		internet: internet {
-			label = "internet";
-			gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
-		};
-		internet2 {
-			label = "internet2";
-			gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
-		};
-		voip {
-			label = "voip";
-			gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
-		};
-		phone {
-			label = "phone";
-			gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
-		};
-		phone2 {
-			label = "phone2";
-			gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
-		};
-		usb: usb {
-			label = "usb";
-			gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
-		};
-		usb2: usb2 {
-			label = "usb2";
-			gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
-		};
-		usb3 {
-			label = "usb3";
-			gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
-		};
-		unlabeled {
-			label = "unlabeled";
-			gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV4518PWR01.dts b/target/linux/lantiq/dts/ARV4518PWR01.dts
deleted file mode 100644
index 34f868f484..0000000000
--- a/target/linux/lantiq/dts/ARV4518PWR01.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "ARV4518PWR01.dtsi"
-
-/ {
-	compatible = "arcadyan,arv4518pwr01", "lantiq,xway", "lantiq,danube";
-	model = "SMC7908A-ISP";
-};
diff --git a/target/linux/lantiq/dts/ARV4518PWR01.dtsi b/target/linux/lantiq/dts/ARV4518PWR01.dtsi
deleted file mode 100644
index 8e712bfec6..0000000000
--- a/target/linux/lantiq/dts/ARV4518PWR01.dtsi
+++ /dev/null
@@ -1,198 +0,0 @@
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-
-		led-dsl = &dsl;
-		led-internet = &online;
-		led-usb = &usb;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>; /* 64 KB */
-						read-only;
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x10000 0x10000>; /* 64 KB */
-						read-only;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x3d0000>;
-					};
-
-					boardconfig: partition@400000 {
-						label = "boardconfig";
-						reg = <0x3f0000 0x10000>;
-						read-only;
-					};
-				};
-			};
-
-			gpiomm: gpiomm@4000000 {
-				compatible = "lantiq,gpio-mm";
-				reg = <1 0x0 0x10 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				lantiq,shadow = <0x0>;
-			};
-
-			ath5k_eep {
-				compatible = "ath5k,eeprom";
-				ath,eep-flash = <&boardconfig 0x400>;
-				ath,mac-offset = <0x16>;
-				ath,mac-increment = <1>;
-				ath,eep-swap;
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				ebu {
-					lantiq,groups = "ebu cs1";
-					lantiq,function = "ebu";
-				};
-				pci_in {
-					lantiq,groups = "req1", "req2";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1", "gnt2";
-					lantiq,function = "pci";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0xf>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power: power {
-			label = "power";
-			gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		dsl: dsl {
-			label = "dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		online: online {
-			label = "online";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "wifi";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-		};
-		dsl2 {
-			label = "dsl2";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		usb: usb {
-			label = "usb";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-		};
-		voice {
-			label = "voice";
-			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-		};
-		fxs1 {
-			label = "fxs1";
-			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-		};
-		fxs2 {
-			label = "fxs2";
-			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-		};
-		fxo {
-			label = "fxo";
-			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV4518PWR01A.dts b/target/linux/lantiq/dts/ARV4518PWR01A.dts
deleted file mode 100644
index 771d0146d8..0000000000
--- a/target/linux/lantiq/dts/ARV4518PWR01A.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-/dts-v1/;
-
-#include "ARV4518PWR01.dtsi"
-
-/ {
-	compatible = "arcadyan,arv4518pwr01a", "lantiq,xway", "lantiq,danube";
-	model = "SMC7908A-ISP, Airties WAV-221";
-
-	fpi@10000000 {
-		pci@E105400 {
-			lantiq,external-clock;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV4519PW.dts b/target/linux/lantiq/dts/ARV4519PW.dts
deleted file mode 100644
index 8f781760f9..0000000000
--- a/target/linux/lantiq/dts/ARV4519PW.dts
+++ /dev/null
@@ -1,195 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv4519pw", "lantiq,xway", "lantiq,danube";
-	model = "Vodafone Netfaster IAD 2, Pirelli P.RG A4201G";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &internet_green;
-		led-usb = &usb;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>;
-						read-only;
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x10000 0x10000>;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x3d0000>;
-					};
-
-					boardconfig: partition@3f0000 {
-						label = "boardconfig";
-						reg = <0x3f0000 0x10000>;
-						read-only;
-					};
-				};
-			};
-
-			gpiomm: gpiomm@4000000 {
-				compatible = "lantiq,gpio-mm";
-				reg = <1 0x0 0x10 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				lantiq,shadow = <0x400>;
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				ebu {
-					lantiq,groups = "ebu cs1";
-					lantiq,function = "ebu";
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0xf>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_green: power {
-			label = "arv4519pw:green:power";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power2 {
-			label = "arv4519pw:red:power";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "arv4519pw:green:wlan";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "arv4519pw:green:dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		internet_green: online {
-			label = "arv4519pw:green:internet";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		online2 {
-			label = "arv4519pw:red:internet";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		usb: usb {
-			label = "arv4519pw:green:usb";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-		};
-		voip {
-			label = "arv4519pw:green:voip";
-			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-		};
-		fxs1 {
-			label = "arv4519pw:green:phone1";
-			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-		};
-		fxs2 {
-			label = "arv4519pw:green:phone2";
-			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-		};
-		fxo {
-			label = "arv4519pw:green:line";
-			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-		};
-		wps2 {
-			label = "arv4519pw:green:wps";
-			gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "arv4519pw:orange:wps";
-			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-		};
-		wps3 {
-			label = "arv4519pw:red:wps";
-			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV4520PW.dts b/target/linux/lantiq/dts/ARV4520PW.dts
deleted file mode 100644
index 05e0dfe048..0000000000
--- a/target/linux/lantiq/dts/ARV4520PW.dts
+++ /dev/null
@@ -1,221 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv4520pw", "lantiq,xway", "lantiq,danube";
-	model = "Easybox 800, WAV-281";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_blue;
-		led-failsafe = &power_red;
-		led-running = &power_blue;
-
-		led-dsl = &dsl;
-		led-internet = &internet_blue;
-		led-usb = &usb;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH
-				&gpiomm 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x20000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "uboot_env";
-						reg = <0x20000 0x10000>;
-						read-only;
-					};
-
-					partition@30000 {
-						label = "firmware";
-						reg = <0x30000 0x3c0000>;
-					};
-
-					boardconfig: partition@7f0000 {
-						label = "boardconfig";
-						reg = <0x3f0000 0x10000>;
-						read-only;
-					};
-				};
-			};
-
-			gpiomm: gpiomm@4000000 {
-				compatible = "lantiq,gpio-mm";
-				reg = <1 0x0 0x10 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				lantiq,shadow = <0x400>;
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				ebu {
-					lantiq,groups = "ebu cs1";
-					lantiq,function = "ebu";
-				};
-				pci_in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "rmii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
-		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-// gpiomm 10 - switch
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "wps";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_blue: power {
-			label = "arv4520pw:blue:power";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		dsl: dsl {
-			label = "arv4520pw:blue:dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		internet_blue: internet {
-			label = "arv4520pw:blue:internet";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		power_red: power2 {
-			label = "arv4520pw:red:power";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "arv4520pw:yellow:wps";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-		};
-		wps2 {
-			label = "arv4520pw:red:wps";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-		};
-		/*
-			wps green is missing
-		*/
-		fxs1 {
-			label = "arv4520pw:blue:telefon1";
-			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-		};
-		fxs2 {
-			label = "arv4520pw:blue:telefon2";
-			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-		};
-		isdn {
-			label = "arv4520pw:blue:isdn";
-			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-		};
-		fxo {
-			label = "arv4520pw:blue:line";
-			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-		};
-		voice {
-			label = "arv4520pw:blue:sprache";
-			gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
-		};
-		usb: usb {
-			label = "arv4520pw:blue:usb";
-			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "arv4520pw:blue:wifi";
-			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-		};
-		internet2 {
-			label = "arv4520pw:red:internet";
-			gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
-		};
-		/*
-			info is missing
-		*/
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV4525PW.dts b/target/linux/lantiq/dts/ARV4525PW.dts
deleted file mode 100644
index 61548c793a..0000000000
--- a/target/linux/lantiq/dts/ARV4525PW.dts
+++ /dev/null
@@ -1,169 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube";
-	model = "Speedport W501V Typ A";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		/* we dont have a power led, lets use the online led */
-		led-boot = &online;
-		led-failsafe = &online;
-
-		led-dsl = &dsl;
-		led-internet = &online;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>;
-						read-only;
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x10000 0x10000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x3d0000>;
-					};
-
-					boardconfig: partition@400000 {
-						label = "boardconfig";
-						reg = <0x3f0000 0x10000>;
-						read-only;
-					};
-				};
-			};
-
-			ath5k_eep {
-				compatible = "ath5k,eeprom";
-				ath,eep-flash = <&boardconfig 0x400>;
-				ath,mac-offset = <0x0>;
-				ath,eep-swap;
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				pci_in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <2>;
-					lantiq,output = <1>;
-				};
-				relay {
-					lantiq,pins = "io31";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-/*
-#define ARV4525PW_PHYRESET	13
-#define ARV4525PW_RELAY		31
-*/
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		fxo {
-			label = "arv4525pw:green:festnetz";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		fxs {
-			label = "arv4525pw:green:internet";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "arv4525pw:green:t-dsl";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "arv4525pw:green:wlan";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		online: online {
-			label = "arv4525pw:green:online";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV452CQW.dts b/target/linux/lantiq/dts/ARV452CQW.dts
deleted file mode 100644
index d996e8b66f..0000000000
--- a/target/linux/lantiq/dts/ARV452CQW.dts
+++ /dev/null
@@ -1,237 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
-	model = "Arcor 801";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_blue;
-		led-failsafe = &power_red;
-		led-running = &power_blue;
-
-		led-dsl = &dsl_blue;
-		led-usb = &usb;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH
-				&gpiomm 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x400000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>;
-						read-only;
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x10000 0x10000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x3d0000>;
-					};
-
-					boardconfig: partition@3f0000 {
-						label = "boardconfig";
-						reg = <0x3f0000 0x10000>;
-						read-only;
-					};
-				};
-			};
-
-			ath5k_eep {
-				compatible = "ath5k,eeprom";
-				ath,eep-flash = <&boardconfig 0x400>;
-				ath,mac-offset = <0x0>;
-				ath,eep-swap;
-			};
-			gpiomm: gpiomm@4000000 {
-				compatible = "lantiq,gpio-mm";
-				reg = <1 0x0 0x10>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				lantiq,shadow = <0x77f>;
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				ebu {
-					lantiq,groups = "ebu cs1";
-					lantiq,function = "ebu";
-				};
-				pci_in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-				leds {
-					lantiq,pins = "io3", "io5", "io6", "io7", "io9";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
-		};
-
-		etop@E180000 {
-			phy-mode = "rmii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-/*
-#define ARV452CPW_SWITCH_RESET          110
-*/
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power_blue: power0 {
-			label = "arv452cqw:blue:power";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		dsl_blue: dsl {
-			label = "arv452cqw:blue:dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		isdn {
-			label = "arv452cqw:blue:isdn";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		power_red: power1 {
-			label = "arv452cqw:red:power";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "arv452cqw:blue:wps";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-		};
-		wps1 {
-			label = "arv452cqw:yellow:wps";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-		};
-		fxs1 {
-			label = "arv452cqw:blue:telefon1";
-			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-		};
-		fxs2 {
-			label = "arv452cqw:blue:telefon2";
-			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-		};
-		wps2 {
-			label = "arv452cqw:red:wps";
-			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-		};
-		fxo {
-			label = "arv452cqw:blue:line";
-			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-		};
-		voice {
-			label = "arv452cqw:blue:sprache";
-			gpios = <&gpiomm 4 1>;
-		};
-		usb: usb {
-			label = "arv452cqw:blue:usb";
-			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "arv452cqw:blue:wlan";
-			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-		};
-		/*
-			internet blue and internet red are missing
-			dsl2 and dsl3 are not referenced in manual
-		*/
-		dsl2 {
-			label = "arv452cqw:yellow:dsl";
-			gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
-		};
-		dsl3 {
-			label = "arv452cqw:red:dsl";
-			gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV7506PW11.dts b/target/linux/lantiq/dts/ARV7506PW11.dts
deleted file mode 100644
index 3ec4bf41a0..0000000000
--- a/target/linux/lantiq/dts/ARV7506PW11.dts
+++ /dev/null
@@ -1,165 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
-	model = "Alice/O2 IAD 4421";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power_red;
-		led-running = &power;
-
-		led-dsl = &dsl;
-		led-internet = &internet;
-		led-wifi = &wlan;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x800000>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x40000>;
-						read-only;
-					};
-
-					partition@40000 {
-						label = "uboot_env";
-						reg = <0x40000 0x10000>;
-						read-only;
-					};
-
-					partition@50000 {
-						label = "firmware";
-						reg = <0x50000 0x7a0000>;
-					};
-
-					boardconfig: partition@7f0000 {
-						label = "board_config";
-						reg = <0x7f0000 0x10000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				pci {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <2>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		/* GPIO 19: switch reset */
-		etop@E180000 {
-			phy-mode = "rmii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		wlan: wlan {
-			label = "arv7506pw11:green:wlan";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-		};
-		power: power {
-			label = "arv7506pw11:green:power";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		dsl: dsl {
-			label = "arv7506pw11:green:dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		internet: internet {
-			label = "arv7506pw11:green:internet";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		power_red: power_red {
-			label = "arv7506pw11:red:power";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		internet_red {
-			label = "arv7506pw11:red:internet";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-		};
-		info {
-			label = "arv7506pw11:green:info";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		telefon {
-			label = "arv7506pw11:green:telefon";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-		};
-		info_red {
-			label = "arv7506pw11:red:info";
-			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	lantiq,external-clock;
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@1814,3592 {
-		compatible = "pci1814,3592";
-		reg = <0x7000 0 0 0 0>;
-		ralink,mtd-eeprom = <&boardconfig 0x410>;
-		ralink,mtd-eeprom-swap;
-		mtd-mac-address = <&boardconfig 0x16>;
-		mtd-mac-address-increment = <1>;
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV7510PW22.dts b/target/linux/lantiq/dts/ARV7510PW22.dts
deleted file mode 100644
index dc3f614b9d..0000000000
--- a/target/linux/lantiq/dts/ARV7510PW22.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
-	model = "Astoria Networks ARV7510PW22";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-
-		led-dsl = &internet;
-		led-usb = &umts;
-		led-wifi = &wlan;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x1000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x40000>;
-						read-only;
-					};
-
-					partition@40000 {
-						label = "uboot_env";
-						reg = <0x40000 0x20000>;
-						read-only;
-					};
-
-					partition@60000 {
-						label = "firmware";
-						reg = <0x60000 0xf80000>;
-					};
-
-					boardconfig: partition@fe0000 {
-						label = "board_config";
-						reg = <0xfe0000 0x20000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_in {
-					lantiq,groups = "req1", "req2";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <2>;
-					lantiq,output = <1>;
-				};
-				pins_out {
-					lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
-					lantiq,output = <1>;
-				};
-				pins_in {
-					lantiq,pins = "io11", "io12", "io28";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		etop@E180000 {
-			/* Switch reset 19 */
-			phy-mode = "mii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		restart {
-			label = "restart";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power: power {
-			label = "power";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		internet: internet {
-			label = "internet";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		wlan: wlan {
-			label = "wlan";
-			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-		};
-		umts: 3g {
-			label = "3g";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-		message {
-			label = "message";
-			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	lantiq,external-clock;
-	interrupt-map = <
-		0x7000 0 0 1 &icu0 30
-		0x7800 0 0 1 &icu0 135
-		0x7800 0 0 2 &icu0 135
-		0x7800 0 0 3 &icu0 135
-	>;
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-	req-mask = <0x3>;
-
-	wifi@1814,3592 {
-		compatible = "pci1814,3592";
-		reg = <0x7000 0 0 0 0>;
-		ralink,mtd-eeprom = <&boardconfig 0x410>;
-		ralink,mtd-eeprom-swap;
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV7518PW.dts b/target/linux/lantiq/dts/ARV7518PW.dts
deleted file mode 100644
index 41b1249323..0000000000
--- a/target/linux/lantiq/dts/ARV7518PW.dts
+++ /dev/null
@@ -1,232 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube";
-	model = "Astoria Networks ARV7518PW";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &online_green;
-		led-usb = &usb;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>;
-						read-only;
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x10000 0x10000>;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x7d0000>;
-					};
-
-					boardconfig: partition@400000 {
-						label = "boardconfig";
-						reg = <0x7f0000 0x10000>;
-						read-only;
-					};
-				};
-			};
-
-			gpiomm: gpiomm@4000000 {
-				compatible = "lantiq,gpio-mm";
-				reg = <1 0x0 0x10 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				lantiq,shadow = <0x0>;
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				ebu {
-					lantiq,groups = "ebu cs1";
-					lantiq,function = "ebu";
-				};
-				pci_in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <2>;
-					lantiq,output = <1>;
-				};
-				leds {
-					lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
-					lantiq,output = <1>;
-				};
-				keys {
-					lantiq,pins = "io28", "io30";
-					lantiq,output = <0>;
-					lantiq,pull = <2>;
-					lantiq,open-drain = <1>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-/*
-#define SWITCH_RESET          13
-*/
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power_green: power {
-			label = "arv7518pw:green:power";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		dsl: dsl {
-			label = "arv7518pw:green:dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		online_green: online {
-			label = "arv7518pw:green:internet";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "arv7518pw:green:wlan";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		power_red: power2 {
-			label = "arv7518pw:red:power";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-		};
-		online2 {
-			label = "arv7518pw:red:internet";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		usb: usb {
-			label = "arv7518pw:green:usb";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-		};
-		voice {
-			label = "arv7518pw:green:voip";
-			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-		};
-		fxs1 {
-			label = "arv7518pw:green:phone1";
-			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-		};
-		fxs2 {
-			label = "arv7518pw:green:phone2";
-			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-		};
-		unlabeled {
-			label = "arv7518pw:amber:unlabeled";
-			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "arv7518pw:amber:wps";
-			gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
-		};
-		wps2 {
-			label = "arv7518pw:green:wps";
-			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-		};
-		wps3 {
-			label = "arv7518pw:red:wps";
-			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-	lantiq,external-clock;
-	req-mask = <0xf>;
-
-	wifi@168c,0029 {
-		compatible = "pci168c,0029";
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-		mtd-mac-address = <&boardconfig 0x16>;
-		mtd-mac-address-increment = <1>;
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV7519PW.dts b/target/linux/lantiq/dts/ARV7519PW.dts
deleted file mode 100644
index 9983a7906f..0000000000
--- a/target/linux/lantiq/dts/ARV7519PW.dts
+++ /dev/null
@@ -1,229 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube";
-	model = "Astoria Networks ARV7519PW";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power2;
-		led-running = &power;
-
-		led-dsl = &dsl;
-		led-internet = &online;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x40000>;
-						read-only;
-					};
-
-					partition@40000 {
-						label = "uboot_env";
-						reg = <0x40000 0x20000>;
-					};
-
-					partition@60000 {
-						label = "firmware";
-						reg = <0x60000 0xf80000>;
-					};
-
-					boardconfig: partition@fe0000 {
-						label = "board_config";
-						reg = <0xfe0000 0x20000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				ebu {
-					lantiq,groups = "ebu cs1";
-					lantiq,function = "ebu";
-				};
-				pci_in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <2>;
-					lantiq,output = <1>;
-				};
-				switch_rst {
-					lantiq,pins = "io19";
-					lantiq,pull = <2>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-
-		/* warning: passive port
-		only works with active devices */
-		ifxhcd@E101000 {
-			status = "okay";
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power: power {
-			label = "power";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power2: power2 {
-			label = "power2";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-		online: online {
-			label = "online";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-		};
-		online2 {
-			label = "online2";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "wifi";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-		};
-		wifi2 {
-			label = "wifi2";
-			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-		};
-		wifi3 {
-			label = "wifi3";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		voice {
-			label = "voice";
-			gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-		wps2 {
-			label = "wps2";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-		};
-		wps3 {
-			label = "wps3";
-			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		lan {
-			label = "lan";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-		};
-		tv {
-			label = "tv";
-			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-		};
-		upgrade {
-			label = "upgrade";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	/* is there another way to "reserve" the GPIO? */
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		switch {
-			gpio-export,name = "switch";
-			gpio-export,output = <1>;
-			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	lantiq,external-clock;
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-	req-mask = <0xf>;
-
-	wifi@0,0 {
-		compatible = "pci0,0";
-		reg = <0x7000 0 0 0 0>;
-		ralink,mtd-eeprom = <&boardconfig 0x410>;
-		ralink,mtd-eeprom-swap;
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV7519RW22.dts b/target/linux/lantiq/dts/ARV7519RW22.dts
deleted file mode 100644
index 0bdc150a1e..0000000000
--- a/target/linux/lantiq/dts/ARV7519RW22.dts
+++ /dev/null
@@ -1,231 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9";
-	model = "Orange Livebox 2.1";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_green;
-		led-running = &power_green;
-
-		led-dsl = &internet_green;
-	};
-
-	memory@0 {
-		reg = <0x0 0x8000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x0 0x60000>;
-						read-only;
-					};
-
-					partition@60000 {
-						label = "uboot-env";
-						reg = <0x60000 0x20000>;
-						read-only;
-					};
-
-					partition@80000 {
-						label = "firmware";
-						reg = <0x80000 0x1f00000>;
-					};
-
-					boardconfig: partition@1f80000 {
-						label = "boardconfig";
-						reg = <0x1f80000 0x80000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				pcie-rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
-		};
-
-		ifxhcd@E106000 {
-			status = "okay";
-			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
-		};
-
-		pcie@d900000 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware1 = "lantiq/xrx200_phy22f_a14.bin";	/*VR9 1.1*/
-		firmware2 = "lantiq/xrx200_phy22f_a22.bin";	/*VR9 1.2*/
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		lan_green {
-			label = "arv7519rw22:green:lan";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-		};
-		internet_red {
-			label = "arv7519rw22:red:internet";
-			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-		};
-		power_green: power_green {
-			label = "arv7519rw22:green:power";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		alarm_blue {
-			label = "arv7519rw22:blue:alarm";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-		internet_orange {
-			label = "arv7519rw22:orange:internet";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-		};
-		internet_green: internet_green {
-			label = "arv7519rw22:green:internet";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-		};
-		voice_green {
-			label = "arv7519rw22:green:voice";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		mtd-mac-address = <&boardconfig 0x16>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-		};
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "mii";
-			phy-handle = <&phy13>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <5>;
-			phy-mode = "mii";
-			phy-handle = <&phy14>;
-		};
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "mii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <3>;
-			phy-mode = "mii";
-			phy-handle = <&phy12>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy12: ethernet-phy@12 {
-			reg = <0x12>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy14: ethernet-phy@14 {
-			reg = <0x14>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV7525PW.dts b/target/linux/lantiq/dts/ARV7525PW.dts
deleted file mode 100644
index 0007535895..0000000000
--- a/target/linux/lantiq/dts/ARV7525PW.dts
+++ /dev/null
@@ -1,155 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
-	model = "Speedport W303V Typ A";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &power_green;
-		led-internet = &online;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>;
-						read-only;
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x10000 0x10000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x3d0000>;
-					};
-
-					boardconfig: partition@400000 {
-						label = "board_config";
-						reg = <0x3f0000 0x10000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-				};
-				pci {
-					lantiq,groups = "gnt1", "req1";
-					lantiq,function = "pci";
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power_green: power {
-			label = "arv7525pw:green:power";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power1 {
-			label = "arv7525pw:red:power";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		online: online {
-			label = "arv7525pw:green:online";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		voice {
-			label = "arv7525pw:green:telefonie";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		voice2 {
-			label = "arv7525pw:red:telefonie";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "arv7525pw:green:wlan";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
-
-	wifi@0,0 {
-		compatible = "pci0,0";
-		reg = <0x7000 0 0 0 0>;
-		ralink,mtd-eeprom = <&boardconfig 0x410>;
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV752DPW.dts b/target/linux/lantiq/dts/ARV752DPW.dts
deleted file mode 100644
index 3591b43671..0000000000
--- a/target/linux/lantiq/dts/ARV752DPW.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube";
-	model = "Arcor 802";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_red;
-		led-failsafe = &power_blue;
-		led-running = &power_red;
-
-		led-dsl = &internet_red;
-		led-usb = &umts;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>;
-						read-only;
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x10000 0x10000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x7d0000>;
-					};
-
-					boardconfig: partition@7f0000 {
-						label = "board_config";
-						reg = <0x7f0000 0x10000>;
-						read-only;
-					};
-				};
-			};
-
-			gpiomm: gpiomm@4000000 {
-				compatible = "lantiq,gpio-mm";
-				reg = <1 0x0 0x10 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				lantiq,shadow = <0x3>;
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				ebu {
-					lantiq,groups = "ebu cs1";
-					lantiq,function = "ebu";
-				};
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_in {
-					lantiq,groups = "req2", "req1";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <2>;
-					lantiq,output = <1>;
-				};
-				leds {
-					lantiq,pins = "io3", "io5", "io6", "io8";
-					lantiq,output = <1>;
-					lantiq,pull = <0>;
-				};
-				keys {
-					lantiq,pins = "io11", "io12", "io13", "io28";
-					lantiq,output = <0>;
-					lantiq,pull = <2>;
-					lantiq,open-drain = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		etop@E180000 {
-			phy-mode = "rmii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		restart {
-			label = "restart";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-		dsl {
-			label = "dsl";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power_blue: power1 {
-			label = "arv752dpw:blue:power";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-		};
-		internet_red: internet {
-			label = "arv752dpw:red:internet";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		message {
-			label = "arv752dpw:red:message";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		power_red: power {
-			label = "arv752dpw:red:power";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		voice1 {
-			label = "arv752dpw:red:voice";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		umts: umts {
-			label = "arv752dpw:red:umts";
-			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "arv752dpw:red:wifi";
-			gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
-		};
-		fxs1 {
-			label = "arv752dpw:green:tae-n";
-			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-		};
-		fxs2 {
-			label = "arv752dpw:green:tae-u";
-			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-		};
-		fxo {
-			label = "arv752dpw:green:isdn";
-			gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
-		};
-		internet2 {
-			label = "arv752dpw:blue:internet";
-			gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
-		};
-		voice2 {
-			label = "arv752dpw:blue:voice";
-			gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	lantiq,external-clock;
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-	interrupt-map = <0x7000 0 0 1 &icu0 135>;
-	req-mask = <0x3>;
-
-	wifi@1814,0601 {
-		compatible = "pci1814,0601";
-		reg = <0x7000 0 0 0 0>;
-		ralink,mtd-eeprom = <&boardconfig 0x410>;
-		ralink,mtd-eeprom-swap;
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV752DPW22.dts b/target/linux/lantiq/dts/ARV752DPW22.dts
deleted file mode 100644
index 8b5be8b76c..0000000000
--- a/target/linux/lantiq/dts/ARV752DPW22.dts
+++ /dev/null
@@ -1,259 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube";
-	model = "Arcor 803";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_red;
-		led-failsafe = &power_blue;
-		led-running = &power_red;
-
-		led-dsl = &internet_red;
-		led-usb = &umts;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x30000>;
-						read-only;
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x30000 0x10000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x40000 0x7b0000>;
-					};
-
-					boardconfig: partition@7f0000 {
-						label = "board_config";
-						reg = <0x7f0000 0x10000>;
-						read-only;
-					};
-				};
-			};
-
-			gpiomm: gpiomm@4000000 {
-				compatible = "lantiq,gpio-mm";
-				reg = <1 0x0 0x10 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				lantiq,shadow = <3>;
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				ebu {
-					lantiq,groups = "ebu cs1";
-					lantiq,function = "ebu";
-				};
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,open-drain = <1>;
-					lantiq,output = <1>;
-				};
-				leds {
-					lantiq,pins = "io3", "io5", "io6", "io8";
-					lantiq,open-drain = <1>;
-					lantiq,output = <1>;
-				};
-				buttons {
-					lantiq,pins = "io11", "io12", "io13", "io28";
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		restart {
-			label = "restart";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-		dsl {
-			label = "dsl";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power_blue: power1 {
-			label = "arv752dpw22:blue:power";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-		};
-		internet_red: internet {
-			label = "arv752dpw22:red:internet";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		message {
-			label = "arv752dpw22:red:message";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		power_red: power {
-			label = "arv752dpw22:red:power";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		voice1 {
-			label = "arv752dpw22:red:voice";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		umts: umts {
-			label = "arv752dpw22:red:umts";
-			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "arv752dpw22:red:wifi";
-			gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
-		};
-		fxs1 {
-			label = "arv752dpw22:green:tae-n";
-			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-		};
-		fxs2 {
-			label = "arv752dpw22:green:tae-u";
-			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-		};
-		fxo {
-			label = "arv752dpw22:green:isdn";
-			gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
-		};
-		internet2 {
-			label = "arv752dpw22:blue:internet";
-			gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
-		};
-		voice2 {
-			label = "arv752dpw22:blue:voice";
-			gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
-		};
-		eth1 {
-			 label = "arv752dpw22:green:lan1";
-			 gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>;
-		};
-		eth2 {
-			label = "arv752dpw22:green:lan2";
-			gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>;
-		};
-		eth3 {
-			label = "arv752dpw22:green:lan3";
-			gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>;
-		};
-		eth4 {
-			label = "arv752dpw22:green:lan4";
-			gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	lantiq,external-clock;
-	interrupt-map = <
-		0x7000 0 0 1 &icu0 30
-		0x7800 0 0 1 &icu0 135
-		0x7800 0 0 2 &icu0 135
-		0x7800 0 0 3 &icu0 135
-	>;
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-	req-mask = <0x3>;
-
-	wifi@1814,3592 {
-		compatible = "pci1814,3592";
-		reg = <0x7000 0 0 0 0>;
-		ralink,mtd-eeprom = <&boardconfig 0x410>;
-		ralink,mtd-eeprom-swap;
-		mtd-mac-address = <&boardconfig 0x16>;
-	};
-};
diff --git a/target/linux/lantiq/dts/ARV8539PW22.dts b/target/linux/lantiq/dts/ARV8539PW22.dts
deleted file mode 100644
index 4edcde9763..0000000000
--- a/target/linux/lantiq/dts/ARV8539PW22.dts
+++ /dev/null
@@ -1,180 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube";
-	model = "Speedport W 504V Typ A";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl_green;
-		led-internet = &online_green;
-		led-wifi = &wireless_green;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x30000>;	/* 192 KiB */
-						read-only;
-					};
-
-					partition@30000 {
-						label = "uboot";
-						reg = <0x30000 0x10000>;	/* 64 KiB */
-						read-only;
-					};
-
-					partition@40000 {
-						label = "firmware";
-						reg = <0x40000 0x7B0000>;       /* 7872 KiB */
-					};
-
-					art: partition@7F0000 {
-						label = "art";
-						reg = <0x7F0000 0x10000>;       /* 64 KiB*/
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				pci_in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <2>;
-					lantiq,output = <1>;
-				};
-				relay {
-					lantiq,pins = "io31";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mtd-mac-address = <&art 0x16>;
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-			lantiq,portmask = <0x3>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		wlan {
-			label = "wlan";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		/* key DECT is missing */
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_green: power-green {
-			label = "arv8539pw22:green:power";
-			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power-red {
-			label = "arv8539pw22:red:power";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-
-		dsl_green: dsl-green {
-			label = "arv8539pw22:green:dsl";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-
-		online_green: online-green {
-			label = "arv8539pw22:green:online";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-
-		wireless_green: wireless-green {
-			label = "arv8539pw22:green:wlan";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		/*
-			telefonie green is missing
-		*/
-	};
-};
-
-&pci0 {
-	status = "okay";
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@168c,0029 {
-		compatible = "pci168c,0029";
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-		mtd-mac-address = <&art 0x16>;
-		mtd-mac-address-increment = <1>;
-	};
-};
diff --git a/target/linux/lantiq/dts/ASL56026.dts b/target/linux/lantiq/dts/ASL56026.dts
deleted file mode 100644
index 2037f40f03..0000000000
--- a/target/linux/lantiq/dts/ASL56026.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
-	model = "BT OpenReach VDSL Modem";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x0800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x0 0x30000>;
-					};
-
-					partition@30000 {
-						label = "uboot_env";
-						reg = <0x30000 0x10000>;
-					};
-
-					partition@40000 {
-						label = "firmware";
-						reg = <0x40000 0x750000>;
-					};
-
-					partition@790000 {
-						label = "ddrconfig";
-						reg = <0x790000 0x70000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-			};
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware1 = "lantiq/xrx200_phy22f_a14.bin";	/*VR9 1.1*/
-		firmware2 = "lantiq/xrx200_phy22f_a22.bin";	/*VR9 1.2*/
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		dsl: dsl {
-			label = "asl56026:green:dsl";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-
-		/* power-* is a bicolour led */
-		power_green: power_green {
-			label = "asl56026:green:power";
-			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		power_red: power_red {
-			label = "asl56026:red:power";
-			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		power_led_blink {
-			gpio-export,name = "power_led_blink";
-			gpio-export,output = <0>;
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		lantiq,switch;
-
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "mii";
-			phy-handle = <&phy11>;
-		};
-
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <3>;
-			phy-mode = "mii";
-			phy-handle = <&phy14>;
-		};
-
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy14: ethernet-phy@14 {
-			reg = <0x14>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-
-	};
-};
diff --git a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts b/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
deleted file mode 100644
index 961fd9b929..0000000000
--- a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
-	model = "BT Home Hub 2B";  /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_orange;
-		led-failsafe = &power_red;
-		led-running = &power_blue;
-
-		led-dsl = &broadband_blue;
-		led-wifi = &wireless_blue;
-	};
-
-	memory@0 {				  /* RAM: Samsung K4H511638F-LC 64MB */
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {				/* NOR Flash: Spansion S29AL004D 512KB */
-				compatible = "lantiq,nor";	/* "AMD AM29LV400BB" compatible on 3.3.8 */
-				lantiq,cs = <0>;
-				bank-width = <2>;
-				reg = <0 0x0 0x80000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x40000>; /* 256KB */
-					};
-
-					partition@40000 {
-						label = "uboot_env";
-						reg = <0x40000 0x10000>; /* 64KB */
-					};
-
-					partition@50000 {
-						label = "rg_conf_1";
-						reg = <0x50000 0x10000>;
-					};
-
-					partition@60000 {
-						label = "rg_conf_2";
-						reg = <0x60000 0x10000>;
-					};
-
-					partition@70000 {
-						label = "rg_conf_factory";
-						reg = <0x70000 0x10000>;
-					};
-				};
-			};
-
-			nand-parts@0 {		  /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
-				compatible = "lantiq,nand-xway";
-				lantiq,cs = <1>;
-				bank-width = <2>;
-				reg = <1 0x0 0x2000000 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					ath9k_cal: partition@0 {
-						label = "art";	   /* Atheros 9160 wifi b/g/n radio EEPROM */
-						reg = <0x00000 0x4000>;
-						read-only;
-					};
-
-					partition@4000 {
-						label = "kernel";
-						reg = <0x4000 0x200000>;
-					};
-
-					partition@164000 {
-						label = "ubi";
-						reg = <0x204000 0x1DFC000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				nand_out {
-					lantiq,groups = "nand cle", "nand ale";
-					lantiq,function = "ebu";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-				nand_cs1 {
-					lantiq,groups = "nand cs1";
-					lantiq,function = "ebu";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-				};
-				pci_in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-				};
-
-				btn_in {
-					lantiq,pins = "io2", "io15", "io22";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "rmii";
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-		};
-
-		gpios: stp@E100BB0 {
-			status = "okay";
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		findhandset {
-			label = "findhandset";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		upgrading-orange {
-			label = "bthomehubv2b:orange:upgrading";
-			gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		phone-orange {
-			label = "bthomehubv2b:orange:phone";
-			gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
-		};
-		phone-blue {
-			label = "bthomehubv2b:blue:phone";
-			gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		wireless-orange {
-			label = "bthomehubv2b:orange:wireless";
-			gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
-		};
-		wireless_blue: wireless-blue {
-			label = "bthomehubv2b:blue:wireless";
-			gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		broadband-red {
-			label = "bthomehubv2b:red:broadband";
-			gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
-		};
-		broadband-orange {
-			label = "bthomehubv2b:orange:broadband";
-			gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
-		};
-		broadband_blue: broadband-blue {
-			label = "bthomehubv2b:blue:broadband";
-			gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_red: power-red {
-			label = "bthomehubv2b:red:power";
-			gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
-		};
-		power_orange: power-orange {
-			label = "bthomehubv2b:orange:power";
-			gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		power_blue: power-blue {
-			label = "bthomehubv2b:blue:power";
-			gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@168c,0027 {
-		compatible = "pci168c,0027";
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-	};
-};
diff --git a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts
deleted file mode 100644
index d37b9728d2..0000000000
--- a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts
+++ /dev/null
@@ -1,208 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9";
-	model = "BT Home Hub 3A";  /* SoC: Lantiq ar9 @ 333MHz */
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_orange;
-		led-failsafe = &power_red;
-		led-running = &power_blue;
-
-		led-dsl = &broadband_blue;
-		led-wifi = &wireless_blue;
-	};
-
-	memory@0 {				  /* RAM: Samsung K4H511638F-LC 64MB */
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nand-parts@0 {		  /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
-				compatible = "lantiq,nand-xway";
-				lantiq,cs = <1>;
-				bank-width = <2>;
-				reg = <1 0x0 0x2000000 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "preboot";
-						reg = <0x00000 0x8000>;
-						read-only;
-					};
-					partition@8000 {
-						label = "u-boot";
-						reg = <0x8000 0x05c000>;
-						read-only;
-					};
-					partition@64000 {
-						label = "uboot_env";
-						reg = <0x64000 0x004000>;
-					};
-					ath9k_cal: partition@68000 {
-						label = "art-copy";
-						reg = <0x68000 0x004000>;
-					};
-					partition@6c000 {
-						label = "kernel";
-						reg = <0x6c000 0x200000>;
-					};
-					partition@26c000 {
-						label = "ubi";
-						reg = <0x26c000 0x1d94000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				nand_out {
-					lantiq,groups = "nand cle", "nand ale";
-					lantiq,function = "ebu";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-				nand_cs1 {
-					lantiq,groups = "nand cs1";
-					lantiq,function = "ebu";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-
-				pci_in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "rgmii";
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		reset {
-			label = "reset";
-			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		restart {
-			label = "restart";
-			gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		wireless-red {
-			label = "bthomehubv3a:red:wireless";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-		};
-		wireless-orange {
-			label = "bthomehubv3a:orange:wireless";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		wireless_blue: wireless-blue {
-			label = "bthomehubv3a:blue:wireless";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-		};
-
-		broadband-red {
-			label = "bthomehubv3a:red:broadband";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-		};
-		broadband-orange {
-			label = "bthomehubv3a:orange:broadband";
-			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-		};
-		broadband_blue: broadband-blue {
-			label = "bthomehubv3a:blue:broadband";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-		};
-
-		power_red: power-red {
-			label = "bthomehubv3a:red:power";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-		power_orange: power-orange {
-			label = "bthomehubv3a:orange:power";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_blue: power-blue {
-			label = "bthomehubv3a:blue:power";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	ath9k@7000 {
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-	};
-};
diff --git a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts
deleted file mode 100644
index 2f75074696..0000000000
--- a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts
+++ /dev/null
@@ -1,282 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9";
-	model = "BT Home Hub 5A";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_blue;
-
-		led-dsl = &broadband_blue;
-		led-wifi = &wireless_blue;
-	};
-
-	memory@0 {
-		reg = <0x0 0x8000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nand-parts@0 {
-				compatible = "lantiq,nand-xway";
-				lantiq,cs = <1>;
-				bank-width = <2>;
-				reg = <0x1 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <3>;
-				nand-ecc-step-size = <256>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "u-boot";
-						reg = <0x0 0xa0000>;
-						read-only;
-					};
-					partition@a0000 {
-						label = "uboot-env";
-						reg = <0xa0000 0x20000>;
-						read-only;
-					};
-					partition@c0000 {
-						label = "unused";
-						reg = <0xc0000 0x40000>;
-					};
-					partition@100000 {
-						label = "ubi";
-						reg = <0x100000 0x7e80000>;
-					};
-					/*
-					 * last 512 KiB are for the bad block table, not writable
-					 */
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,output = <1>;
-					lantiq,open-drain;
-				};
-				pcie_rst {
-					lantiq,pins = "io38";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-					lantiq,open-drain;
-				};
-				usb_vbus {
-					lantiq,pins = "io33";
-					lantiq,pull = <0>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				nand_out {
-					lantiq,groups = "nand cle", "nand ale";
-					lantiq,function = "ebu";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-				nand_cs1 {
-					lantiq,groups = "nand cs1";
-					lantiq,function = "ebu";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware1 = "lantiq/xrx200_phy11g_a14.bin";	/*VR9 1.1*/
-		firmware2 = "lantiq/xrx200_phy11g_a22.bin";	/*VR9 1.2*/
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		restart {
-			label = "restart";
-			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		/* broadband-* is a single RGB led */
-		broadband-red {
-			label = "bthomehubv5a:red:broadband";
-			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-		};
-		broadband-green {
-			label = "bthomehubv5a:green:broadband";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-		};
-		broadband_blue: broadband-blue {
-			label = "bthomehubv5a:blue:broadband";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-
-		/* wireless-* is a single RGB led */
-		wireless-red {
-			label = "bthomehubv5a:red:wireless";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-		};
-		wireless-green {
-			label = "bthomehubv5a:green:wireless";
-			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-		};
-		wireless_blue: wireless-blue {
-			label = "bthomehubv5a:blue:wireless";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-		};
-
-		/* power-* is a single RGB led */
-		power_red: power-red {
-			label = "bthomehubv5a:red:power";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-		};
-		power_green: power-green {
-			label = "bthomehubv5a:green:power";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_blue: power-blue {
-			label = "bthomehubv5a:blue:power";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-
-		dimmed {
-			label = "dimmed";
-			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@168c,002d {
-		compatible = "pci168c,002d";
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-		qca,disable-5ghz;
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-		};
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <1>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-		ethernet@5 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <5>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy5: ethernet-phy@5 {
-			reg = <0x5>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/DGN1000B.dts b/target/linux/lantiq/dts/DGN1000B.dts
deleted file mode 100644
index e5637efca5..0000000000
--- a/target/linux/lantiq/dts/DGN1000B.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/dts-v1/;
-
-#include "amazonse.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase";
-	model = "Netgear DGN1000B";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-
-		led-dsl = &dsl;
-		led-internet = &online_green;
-	};
-
-	memory@0 {
-		reg = <0x0 0x1000000>;
-	};
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				asc {
-					lantiq,groups = "asc";
-					lantiq,function = "asc";
-				};
-				keys_in {
-					lantiq,pins = "io0",/* "io25", */"io29";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <1>;
-				};
-			};
-			pins_spi_default: pins_spi_default {
-				spi_in {
-					lantiq,groups = "spi_di";
-					lantiq,function = "spi";
-				};
-				spi_out {
-					lantiq,groups = "spi_do", "spi_clk",
-						"spi_cs1";
-					lantiq,function = "spi";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mac-address = [ 00 11 22 33 44 55 ];
-		};
-
-		spi@E100800 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pins_spi_default>;
-
-			m25p80@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "jedec,spi-nor";
-				reg = <1 0>;
-				spi-max-frequency = <5000000>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						reg = <0x0 0x20000>;
-						label = "SPI (RO) U-Boot Image";
-						read-only;
-					};
-
-					partition@20000 {
-						reg = <0x20000 0x10000>;
-						label = "ENV_MAC";
-						read-only;
-					};
-
-					partition@30000 {
-						reg = <0x30000 0x10000>;
-						label = "DPF";
-						read-only;
-					};
-
-					partition@40000 {
-						reg = <0x40000 0x10000>;
-						label = "NVRAM";
-						read-only;
-					};
-
-					partition@500000 {
-						reg = <0x50000 0x003a0000>;
-						label = "kernel";
-					};
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		dsl: dsl {
-			label = "dgn1000b:green:dsl";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		online_green: online {
-			label = "dgn1000b:green:online";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		online2 {
-			label = "dgn1000b:red:online";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		wps {
-			label = "dgn1000b:green:wps";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		power: power {
-			label = "dgn1000b:green:power";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		/*
-			power red is missing
-		*/
-	};
-};
diff --git a/target/linux/lantiq/dts/DGN3500.dts b/target/linux/lantiq/dts/DGN3500.dts
deleted file mode 100644
index 98a2ebd98e..0000000000
--- a/target/linux/lantiq/dts/DGN3500.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "DGN3500.dtsi"
-
-/ {
-	compatible = "netgear,dgn3500", "lantiq,xway", "lantiq,ar9";
-	model = "Netgear DGN3500";
-};
diff --git a/target/linux/lantiq/dts/DGN3500.dtsi b/target/linux/lantiq/dts/DGN3500.dtsi
deleted file mode 100644
index d58d717537..0000000000
--- a/target/linux/lantiq/dts/DGN3500.dtsi
+++ /dev/null
@@ -1,213 +0,0 @@
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		bootargs = "root= console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &internet;
-		led-usb = &usb;
-		led-wifi = &wifi_green;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-				};
-				pci {
-					lantiq,groups = "gnt1", "req1";
-					lantiq,function = "pci";
-				};
-				pci-in {
-					lantiq,groups = "req1";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-				pci-out {
-					lantiq,groups = "gnt1";
-					lantiq,output = <1>;
-					lantiq,pull = <0>;
-				};
-			};
-			pins_spi_default: pins_spi_default {
-				spi_in {
-					lantiq,groups = "spi_di";
-					lantiq,function = "spi";
-				};
-				spi_out {
-					lantiq,groups = "spi_do", "spi_clk",
-						"spi_cs4";
-					lantiq,function = "spi";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-		};
-	};
-
-	rtl8366rb {
-		compatible = "realtek,rtl8366rb";
-		gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
-		gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
-
-		realtek,initvals = <
-			0x0000 0x0830
-			0x0400 0x8130
-			0x000A 0x83ED
-			0x0F51 0x0017
-			0x02F5 0x0048
-			0x02FA 0xFFDF
-			0x02FB 0xFFE0
-			0x0450 0x0000
-			0x0401 0x0000
-			0x0431 0x0960
-		>;
-	};
-
-
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		internet: internet {
-			label = "dgn3500:green:internet";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-		};
-		internet2 {
-			label = "dgn3500:red:internet";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "dgn3500:green:dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		usb: usb {
-			label = "dgn3500:green:usb";
-			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-		};
-		power_green: power {
-			label = "dgn3500:green:power";
-			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power2 {
-			label = "dgn3500:red:power";
-			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-		};
-		wifi_green: wifi {
-			label = "dgn3500:green:wireless";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-		wifi2 {
-			label = "dgn3500:amber:wireless";
-			gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "dgn3500:green:wps";
-			gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@168c,0029 {
-		compatible = "pci168c,0029";
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-	};
-};
-
-&spi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_spi_default>;
-
-	status = "ok";
-
-	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <4 0>;
-		spi-max-frequency = <20000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x10000>;
-				label = "uboot";
-				read-only;
-			};
-
-			partition@10000 {
-				reg = <0x10000 0x10000>;
-				label = "uboot-env";
-				read-only;
-			};
-
-			ath9k_cal: partition@20000 {
-				reg = <0x20000 0x10000>;
-				label = "calibration";
-				read-only;
-			};
-
-			partition@50000 {
-				reg = <0x50000 0xfa0000>;
-				label = "firmware";
-			};
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/DGN3500B.dts b/target/linux/lantiq/dts/DGN3500B.dts
deleted file mode 100644
index d1d788cc7d..0000000000
--- a/target/linux/lantiq/dts/DGN3500B.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "DGN3500.dtsi"
-
-/ {
-	compatible = "netgear,dgn3500b", "lantiq,xway", "lantiq,ar9";
-	model = "Netgear DGN3500B";
-};
diff --git a/target/linux/lantiq/dts/DM200.dts b/target/linux/lantiq/dts/DM200.dts
deleted file mode 100644
index 3c8a2a1fa9..0000000000
--- a/target/linux/lantiq/dts/DM200.dts
+++ /dev/null
@@ -1,215 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9";
-	model = "Netgear DM200";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_amber;
-		led-running = &power_green;
-
-		led-dsl = &dsl_green;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-			};
-
-			pins_spi_default: pins_spi_default {
-				spi_in {
-					lantiq,groups = "spi_di";
-					lantiq,function = "spi";
-				};
-				spi_out {
-					lantiq,groups = "spi_do", "spi_clk", "spi_cs4";
-					lantiq,function = "spi";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		pcie@d900000 {
-			status = "disabled";
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware = "lantiq/xrx200_phy22f_a22.bin";
-		phys = [ 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		reset {
-			label = "reset";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		annexa {
-			gpio-export,name = "annexa";
-			gpio-export,output = <0>;
-			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
-		};
-		annexb {
-			gpio-export,name = "annexb";
-			gpio-export,output = <0>;
-			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_amber: power_amber {
-			label = "dm200:amber:power";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-		};
-		power_green: power_green {
-			label = "dm200:green:power";
-			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan_amber {
-			label = "dm200:amber:lan";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		};
-		lan_green {
-			label = "dm200:green:lan";
-			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		dsl_amber {
-			label = "dm200:amber:dsl";
-			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-		};
-		dsl_green: dsl_green {
-			label = "dm200:green:dsl";
-			gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&spi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_spi_default>;
-
-	status = "ok";
-
-	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <4 0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x20000>;
-				label = "uboot";
-				read-only;
-			};
-
-			partition@20000 {
-				reg = <0x20000 0x10000>;
-				label = "gphyfirmware";
-				read-only;
-			};
-
-			partition@30000 {
-				reg = <0x30000 0x7b0000>;
-				label = "firmware";
-			};
-
-			partition@7e0000 {
-				reg = <0x7e0000 0x10000>;
-				label = "sysconfig";
-				read-only;
-			};
-
-			partition@7f0000 {
-				reg = <0x7f0000 0x2000>;
-				label = "ubootconfig";
-				read-only;
-			};
-
-			partition@7f2000 {
-				reg = <0x7f2000 0x1000>;
-				label = "ART";
-				read-only;
-			};
-
-			partition@7f3000 {
-				reg = <0x7f3000 0x1000>;
-				label = "pot";
-				read-only;
-			};
-
-			partition@7f4000 {
-				reg = <0x7f4000 0xc000>;
-				label = "ret";
-				read-only;
-			};
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "mii";
-			phy-handle = <&phy13>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/EASY50712.dts b/target/linux/lantiq/dts/EASY50712.dts
deleted file mode 100644
index ebd30a7c06..0000000000
--- a/target/linux/lantiq/dts/EASY50712.dts
+++ /dev/null
@@ -1,83 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-/ {
-	compatible = "lantiq,easy50712", "lantiq,xway", "lantiq,danube";
-	model = "Intel EASY50712 Nand";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>; /* 64 KB */
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x10000 0x10000>; /* 64 KB */
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x3d0000>;
-					};
-
-					partition@400000 {
-						label = "rootfs";
-						reg = <0x400000 0x400000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-				};
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-				};
-				pci {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-				};
-				conf_out {
-					lantiq,pins = "io4", "io5", "io6"; /* stp */
-					lantiq,open-drain;
-					lantiq,pull = <0>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "rmii";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/EASY50810.dts b/target/linux/lantiq/dts/EASY50810.dts
deleted file mode 100644
index 605eb826a2..0000000000
--- a/target/linux/lantiq/dts/EASY50810.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-/ {
-	compatible = "lantiq,easy50810", "lantiq,xway", "lantiq,ar9";
-	model = "Lantiq EASY50810";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>; /* 64 KB */
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x10000 0x10000>; /* 64 KB */
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x3d0000>;
-					};
-
-					partition@400000 {
-						label = "rootfs";
-						reg = <0x400000 0x400000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-				};
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-				};
-				pci {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-				};
-				conf_out {
-					lantiq,pins = "io4", "io5", "io6"; /* stp */
-					lantiq,open-drain;
-					lantiq,pull = <0>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "rmii";
-		};
-
-		stp0: stp@E100BB0 {
-			#gpio-cells = <2>;
-			compatible = "lantiq,gpio-stp-xway";
-			gpio-controller;
-			reg = <0xE100BB0 0x40>;
-
-			lantiq,shadow = <0xfff>;
-			lantiq,groups = <0x3>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/EASY80920.dtsi b/target/linux/lantiq/dts/EASY80920.dtsi
deleted file mode 100644
index b19b9713f6..0000000000
--- a/target/linux/lantiq/dts/EASY80920.dtsi
+++ /dev/null
@@ -1,298 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-
-		led-usb = &usb1;
-		led-usb2 = &usb2;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				exin3 {
-					lantiq,groups = "exin3";
-					lantiq,function = "exin";
-				};
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-				};
-				nand {
-					lantiq,groups = "nand cle", "nand ale",
-							"nand rd", "nand rdy";
-					lantiq,function = "ebu";
-				};
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				pci {
-					lantiq,groups = "gnt1", "req1";
-					lantiq,function = "pci";
-				};
-				conf_out {
-					lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
-							"io4", "io5", "io6", /* stp */
-							"io21",
-							"io33";
-					lantiq,open-drain;
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-				pcie-rst {
-					lantiq,pins = "io38";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-				conf_in {
-					lantiq,pins = "io39", /* exin3 */
-							"io48"; /* nand rdy */
-					lantiq,pull = <2>;
-				};
-			};
-			pins_spi_default: pins_spi_default {
-				spi_in {
-					lantiq,groups = "spi_di";
-					lantiq,function = "spi";
-				};
-				spi_out {
-					lantiq,groups = "spi_do", "spi_clk",
-						"spi_cs4";
-					lantiq,function = "spi";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		stp: stp@E100BB0 {
-			compatible = "lantiq,gpio-stp-xway";
-			reg = <0xE100BB0 0x40>;
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			lantiq,shadow = <0xffff>;
-			lantiq,groups = <0x7>;
-			lantiq,dsl = <0x3>;
-			lantiq,phy1 = <0x7>;
-			lantiq,phy2 = <0x7>;
-			/* lantiq,rising; */
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-			lantiq,portmask = <0x3>;
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware1 = "lantiq/xrx200_phy11g_a14.bin";
-		firmware2 = "lantiq/xrx200_phy11g_a22.bin";
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-/*		reset {
-			label = "reset";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};*/
-		paging {
-			label = "paging";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power: power {
-			label = "easy80920:green:power";
-			gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		warning {
-			label = "easy80920:green:warning";
-			gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
-		};
-		fxs1 {
-			label = "easy80920:green:fxs1";
-			gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
-		};
-		fxs2 {
-			label = "easy80920:green:fxs2";
-			gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
-		};
-		fxo {
-			label = "easy80920:green:fxo";
-			gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
-		};
-		usb1: usb1 {
-			label = "easy80920:green:usb1";
-			gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
-		};
-		usb2: usb2 {
-			label = "easy80920:green:usb2";
-			gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
-		};
-		sd {
-			label = "easy80920:green:sd";
-			gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
-		};
-		wps {
-			label = "easy80920:green:wps";
-			gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&spi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_spi_default>;
-
-	status = "ok";
-
-	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <4 0>;
-		spi-max-frequency = <1000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x20000>;
-				label = "SPI (RO) U-Boot Image";
-				read-only;
-			};
-
-			partition@20000 {
-				reg = <0x20000 0x10000>;
-				label = "ENV_MAC";
-				read-only;
-			};
-
-			partition@30000 {
-				reg = <0x30000 0x10000>;
-				label = "DPF";
-				read-only;
-			};
-
-			partition@40000 {
-				reg = <0x40000 0x10000>;
-				label = "NVRAM";
-				read-only;
-			};
-
-			partition@500000 {
-				reg = <0x50000 0x003a0000>;
-				label = "kernel";
-			};
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		lantiq,switch;
-
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <1>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-		};
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-		};
-	};
-
-	wan: interface@1 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-		lantiq,wan;
-
-		ethernet@5 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <5>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy5: ethernet-phy@5 {
-			reg = <0x5>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/EASY80920NAND.dts b/target/linux/lantiq/dts/EASY80920NAND.dts
deleted file mode 100644
index 095bd564da..0000000000
--- a/target/linux/lantiq/dts/EASY80920NAND.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/dts-v1/;
-
-
-#include "EASY80920.dtsi"
-
-/ {
-	compatible = "lantiq,easy80920-nand", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
-	model = "Intel EASY80920 Nand";
-
-	chosen {
-		bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1";
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			ranges = <0 0 0x4000000 0x3ffffff>;
-			nand-parts@0 {
-				compatible = "lantiq,nand-xway";
-				lantiq,cs = <1>;
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x100000>; /* 1024 KB */
-					};
-
-					partition@100000 {
-						label = "uboot_env";
-						reg = <0x100000 0x40000>; /* 256 KB */
-					};
-
-					partition@140000 {
-						label = "ubootconfigB";
-						reg = <0x140000 0x40000>; /* 256 KB */
-					};
-
-					partition@180000 {
-						label = "gphyfirmware";
-						reg = <0x180000 0x40000>; /* 256 KB */
-					};
-
-					partition@1c0000 {
-						label = "ubi";
-						reg = <0x1c0000 0xc800000>;
-					};
-
-					partition@c9c0000 {
-						label = "calibration";
-						reg = <0xc9c0000 0x100000>;
-					};
-
-					partition@cac0000 {
-						label = "res";
-						reg = <0xcac0000 0x13540000>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/EASY80920NOR.dts b/target/linux/lantiq/dts/EASY80920NOR.dts
deleted file mode 100644
index e273138d8a..0000000000
--- a/target/linux/lantiq/dts/EASY80920NOR.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-/dts-v1/;
-
-
-#include "EASY80920.dtsi"
-
-/ {
-	compatible = "lantiq,easy80920-nor", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
-	model = "Intel EASY80920 Nor";
-
-	fpi@10000000 {
-		localbus@0 {
-			ranges = <0 0 0x0 0x3ffffff>;
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>;
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x10000 0x10000>;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x7e0000>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/EASY88388.dts b/target/linux/lantiq/dts/EASY88388.dts
deleted file mode 100644
index a9c5b3c24b..0000000000
--- a/target/linux/lantiq/dts/EASY88388.dts
+++ /dev/null
@@ -1,106 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-	model = "Lantiq Falcon FTTDP8 Reference Board";
-	compatible = "lantiq,easy88388", "lantiq,falcon";
-
-	aliases {
-		spi0 = &ebu_cs0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;  // 64M at 0x0
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <0x198>;
-		};
-	};
-
-	pinctrl {
-		led_pins: led-pins {
-			lantiq,pins = "io34", "io35", "io36", "io37", "io38", 
-					"io39", "io40", "io41";
-			lantiq,function = "gpio";
-		};
-	};
-
-	easy88388-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins &bootled_pins>;
-
-		GPON {
-			label = "easy88388:green:gpon";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		TEST {
-			label = "easy88388:green:test";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		STATUS {
-			label = "easy88388:green:status";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		ERROR {
-			label = "easy88388:red:error";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		DSL1 {
-			label = "easy88388:dsl:1";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		DSL2 {
-			label = "easy88388:dsl:2";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		DSL3 {
-			label = "easy88388:dsl:3";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		DSL4 {
-			label = "easy88388:dsl:4";
-			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		DSL5 {
-			label = "easy88388:dsl:5";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		DSL6 {
-			label = "easy88388:dsl:6";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		DSL7 {
-			label = "easy88388:dsl:7";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		DSL8 {
-			label = "easy88388:dsl:8";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-	};
-};
-
diff --git a/target/linux/lantiq/dts/EASY88444.dts b/target/linux/lantiq/dts/EASY88444.dts
deleted file mode 100644
index ceb81ea13b..0000000000
--- a/target/linux/lantiq/dts/EASY88444.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-	model = "Lantiq Falcon FTTdp G.FAST Reference Board";
-	compatible = "lantiq,easy88444", "lantiq,falcon";
-
-	aliases {
-		spi0 = &ebu_cs0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;  // 64M at 0x0
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <0x198>;
-		};
-	};
-
-	pinctrl {
-		led_pins: led-pins {
-			lantiq,pins = "io34", "io35", "io37";
-			lantiq,function = "gpio";
-		};
-	};
-
-	easy88444-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins &bootled_pins>;
-
-		GPON {
-			label = "easy88444:green:gpon";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		TEST {
-			label = "easy88444:green:test";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		STATUS {
-			label = "easy88444:green:status";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		GFAST1 {
-			label = "easy88444:gfast:1";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		GFAST2 {
-			label = "easy88444:gfast:2";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		GFAST3 {
-			label = "easy88444:gfast:3";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		GFAST4 {
-			label = "easy88444:gfast:4";
-			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-	};
-};
-
diff --git a/target/linux/lantiq/dts/EASY98000-base.dtsi b/target/linux/lantiq/dts/EASY98000-base.dtsi
deleted file mode 100644
index cfe1140ac1..0000000000
--- a/target/linux/lantiq/dts/EASY98000-base.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "lantiq,easy98000", "lantiq,falcon";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-
-	easy98000-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bootled_pins>;
-
-		LED_0 {
-			label = "easy98000:green:gpon";
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_1 {
-			label = "easy98000:red:gpon";
-			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_2 {
-			label = "easy98000:green:gpon_tx";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_3 {
-			label = "easy98000:green:gpon_rx";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_4 {
-			label = "easy98000:green:voice";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_5 {
-			label = "easy98000:green:status";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-};
-
-&ebu_cs1 {
-	eth0: ethernet@0000000 {
-		compatible = "davicom,dm9000";
-		device_type = "network";
-		reg = <0x0000003 0x1>, <0x0000001 0x1>;
-		reg-names = "addr", "data";
-		interrupt-parent = <&gpio1>;
-		#interrupt-cells = <2>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		local-mac-address = [ 00 00 00 00 00 00 ];
-	};
-
-	cpld@3c00000 {
-		compatible = "lantiq,easy98000_addon";
-		reg = <0x3c00000 0x2>;
-	};
-
-	cpld@3c0000c {
-		compatible = "lantiq,easy98000_cpld_led";
-		reg = <0x3c0000c 0x2>,  <0x3c00012 0x2>;
-	};
-};
-
-/* // enable this for second uart:
-&serial1 {
-	status = "okay";
-};*/
-
-&spi {
-	status = "okay";
-
-	eeprom@1 {
-		compatible = "atmel,at25", "atmel,at25160n";
-		reg = <2>;
-		spi-max-frequency = <1000000>;
-		spi-cpha;
-		spi-cpol;
-
-		pagesize = <32>;
-		size = <2048>;
-		address-width = <16>;
-	};
-};
-
-&i2c {
-	status = "okay";
-
-	clock-frequency = <100000>;
-
-	/* eeprom-emulation by OMU */
-	eeprom@50 {
-		compatible = "at,24c02";
-		reg = <0x50>;
-	};
-	eeprom@51 {
-		compatible = "at,24c02";
-		reg = <0x51>;
-	};
-};
-
diff --git a/target/linux/lantiq/dts/EASY98000NAND.dts b/target/linux/lantiq/dts/EASY98000NAND.dts
deleted file mode 100644
index a40cef3931..0000000000
--- a/target/linux/lantiq/dts/EASY98000NAND.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "EASY98000-base.dtsi"
-
-/ {
-	model = "Lantiq Falcon (NAND)";
-	compatible = "lantiq,easy98000-nand", "lantiq,easy98000", "lantiq,falcon";
-
-	aliases {
-		spi0 = &spi;
-	};
-};
-
-&ebu_cs0 {
-	gen_nand@0 {
-		compatible = "gen_nand", "lantiq,nand-falcon";
-		bank-width = <1>;
-		reg = <0x0 0x40000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		linux,mtd-name = "gen_nand";
-		bbt-use-flash;
-
-		partition@0 {
-			label = "uboot";
-			reg = <0x00000 0x40000>;
-		};
-
-		partition@10000 {
-			label = "uboot_env";
-			reg = <0x40000 0x40000>;
-		};
-
-		partition@20000 {
-			label = "linux";
-			reg = <0x80000 0x3d0000>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/EASY98000NOR.dts b/target/linux/lantiq/dts/EASY98000NOR.dts
deleted file mode 100644
index ad53bf96e9..0000000000
--- a/target/linux/lantiq/dts/EASY98000NOR.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "EASY98000-base.dtsi"
-
-/ {
-	model = "Lantiq Falcon (NOR)";
-	compatible = "lantiq,easy98000-nor", "lantiq,easy98000", "lantiq,falcon";
-
-	aliases {
-		spi0 = &spi;
-	};
-};
-
-&ebu_cs0 {
-	cfi@0 {
-		compatible = "lantiq,nor";
-		bank-width = <2>;
-		reg = <0x0 0x4000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "uboot";
-			reg = <0x00000 0x40000>;
-		};
-
-		partition@10000 {
-			label = "uboot_env";
-			reg = <0x40000 0x40000>;
-		};
-
-		partition@20000 {
-			label = "linux";
-			reg = <0x80000 0x3d0000>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/EASY98000SFLASH.dts b/target/linux/lantiq/dts/EASY98000SFLASH.dts
deleted file mode 100644
index bbe524e94e..0000000000
--- a/target/linux/lantiq/dts/EASY98000SFLASH.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "EASY98000-base.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-	model = "Lantiq Falcon (SFLASH)";
-	compatible = "lantiq,easy98000-sflash", "lantiq,easy98000", "lantiq,falcon";
-
-	aliases {
-		spi0 = &ebu_cs0;
-		spi1 = &spi;
-	};
-};
-
diff --git a/target/linux/lantiq/dts/EASY98020.dts b/target/linux/lantiq/dts/EASY98020.dts
deleted file mode 100644
index c0970ef48c..0000000000
--- a/target/linux/lantiq/dts/EASY98020.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-	model = "Lantiq Falcon Reference Board";
-	compatible = "lantiq,easy98020", "lantiq,falcon";
-
-	aliases {
-		spi0 = &ebu_cs0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;  // 64M at 0x0
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <0x198>;
-		};
-	};
-
-	pinctrl {
-		led_pins: phy-led-pins {
-			lantiq,pins = "io42", "io41", "io38", "io37";
-			lantiq,function = "gpio";
-		};
-	};
-
-	easy98020-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bootled_pins>;
-
-		GPON {
-			label = "easy98020:green:gpon";
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		TEST {
-			label = "easy98020:green:test";
-			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		ETH {
-			label = "easy98020:green:status";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		VOICE {
-			label = "easy98020:green:voice";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		VIDEO {
-			label = "easy98020:green:video";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-
-	easy98020-phy-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		GE0_ACT {
-			label = "easy98020:ge0_act";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		GE0_LINK {
-			label = "easy98020:ge0_link";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		GE1_ACT {
-			label = "easy98020:ge1_act";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		GE1_LINK {
-			label = "easy98020:ge1_link";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/EASY98020V18.dts b/target/linux/lantiq/dts/EASY98020V18.dts
deleted file mode 100644
index 9aa1be91ed..0000000000
--- a/target/linux/lantiq/dts/EASY98020V18.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-	model = "Lantiq Falcon Reference Board V1.8";
-	compatible = "lantiq,easy98020-v18", "lantiq,easy98020", "lantiq,falcon";
-
-	aliases {
-		spi0 = &ebu_cs0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;  // 64M at 0x0
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <0x198>;
-		};
-	};
-
-	pinctrl {
-		led_pins: led-pins {
-			lantiq,pins = "io11", "io14", "io36", "io37", "io38";
-			lantiq,function = "gpio";
-		};
-	};
-
-	easy98020-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins &bootled_pins>;
-
-		GPON {
-			label = "easy98020:green:gpon";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		TEST {
-			label = "easy98020:green:test";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		ETH {
-			label = "easy98020:green:status";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		VOICE {
-			label = "easy98020:green:voice";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		VIDEO {
-			label = "easy98020:green:video";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/EASY98021.dts b/target/linux/lantiq/dts/EASY98021.dts
deleted file mode 100644
index 7b2e490fcc..0000000000
--- a/target/linux/lantiq/dts/EASY98021.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-	model = "Lantiq Falcon HGU Reference Board";
-	compatible = "lantiq,easy98021", "lantiq,easy98020", "lantiq,falcon";
-
-	aliases {
-		spi0 = &ebu_cs0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;  // 64M at 0x0
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <0x198>;
-		};
-	};
-
-	gpio-mmc {
-		/* Place-holder for SIM-Card connector,
-		   to list the used GPIOs, no official binding */
-		compatible = "gpio-mmc";
-		gpios =  <&gpio0 3 GPIO_ACTIVE_HIGH>,
-			 <&gpio0 3 GPIO_ACTIVE_HIGH>,
-			 <&gpio0 2 GPIO_ACTIVE_HIGH>,
-			 <0>; /* no CS */
-		gpio-names = "di", "do", "clk", "cs";
-		reset-gpio =  <&gpio3 24 GPIO_ACTIVE_HIGH>;
-	};
-
-	pinctrl {
-		led_pins: led-pins {
-			lantiq,pins = "io11", "io14", "io36", "io37", "io38";
-			lantiq,function = "gpio";
-		};
-	};
-
-	easy98021-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins &bootled_pins>;
-
-		GPON {
-			label = "easy98021:green:gpon";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		TEST {
-			label = "easy98021:red:test";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		ETH {
-			label = "easy98021:green:status";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		VOICE {
-			label = "easy98021:green:voice";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		SIMCARD {
-			label = "easy98021:green:simcard";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-};
-
diff --git a/target/linux/lantiq/dts/EASY98035SYNCE.dts b/target/linux/lantiq/dts/EASY98035SYNCE.dts
deleted file mode 100644
index df941cdb67..0000000000
--- a/target/linux/lantiq/dts/EASY98035SYNCE.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-	model = "Lantiq Falcon SFP Stick with SyncE";
-	compatible = "lantiq,easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon";
-
-	aliases {
-		spi0 = &ebu_cs0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;  // 64M at 0x0
-	};
-
-	pinctrl {
-		compatible = "lantiq,pinctrl-falcon";
-
-		asc0_func1: func1 {
-			func1_tx {
-				lantiq,pins = "io32";
-				lantiq,mux = <1>;
-				lantiq,input = <0>;
-			};
-			func1_rx {
-				lantiq,pins = "io33";
-				lantiq,mux = <0>;
-			};
-		};
-		asc0_func2: func2 {
-			func2_tx {
-				lantiq,pins = "io32";
-				lantiq,mux = <0>;
-			};
-			func2_rx {
-				lantiq,pins = "io33";
-				lantiq,mux = <1>;
-				lantiq,input = <0>;
-			};
-		};
-		asc0_func3: func3 {
-			func3_tx {
-				lantiq,pins = "io32";
-				lantiq,mux = <1>;
-				lantiq,input = <0>;
-			};
-			func3_rx {
-				lantiq,pins = "io33";
-				lantiq,mux = <1>;
-				lantiq,input = <0>;
-			};
-		};
-	};
-
-	pinselect-asc0 {
-		compatible = "lantiq,pinselect-asc0";
-		pinctrl-names = "asc0", "func1", "func2", "func3";
-		pinctrl-0 = <&asc0_pins>;
-		pinctrl-1 = <&asc0_func1>;
-		pinctrl-2 = <&asc0_func2>;
-		pinctrl-3 = <&asc0_func3>;
-	};
-};
-
-&serial0 {
-	pinctrl-names = "default";
-	/* use "empty" pinctrl to leave setting from u-boot enabled */
-	pinctrl-0 = < >;
-};
-
-&i2c {
-	status = "okay";
-};
diff --git a/target/linux/lantiq/dts/EASY98035SYNCE1588.dts b/target/linux/lantiq/dts/EASY98035SYNCE1588.dts
deleted file mode 100644
index a3abc6e707..0000000000
--- a/target/linux/lantiq/dts/EASY98035SYNCE1588.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-	model = "Lantiq Falcon SFP Stick with SyncE/1588";
-	compatible = "lantiq,easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon";
-
-	aliases {
-		spi0 = &ebu_cs0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;  // 64M at 0x0
-	};
-
-	pinctrl {
-		compatible = "lantiq,pinctrl-falcon";
-
-		asc0_func1: func1 {
-			func1_tx {
-				lantiq,pins = "io32";
-				lantiq,mux = <1>;
-				lantiq,input = <0>;
-			};
-			func1_rx {
-				lantiq,pins = "io33";
-				lantiq,mux = <0>;
-			};
-		};
-		asc0_func2: func2 {
-			func2_tx {
-				lantiq,pins = "io32";
-				lantiq,mux = <0>;
-			};
-			func2_rx {
-				lantiq,pins = "io33";
-				lantiq,mux = <1>;
-				lantiq,input = <0>;
-			};
-		};
-		asc0_func3: func3 {
-			func3_tx {
-				lantiq,pins = "io32";
-				lantiq,mux = <1>;
-				lantiq,input = <0>;
-			};
-			func3_rx {
-				lantiq,pins = "io33";
-				lantiq,mux = <1>;
-				lantiq,input = <0>;
-			};
-		};
-	};
-
-	pinselect-asc0 {
-		compatible = "lantiq,pinselect-asc0";
-		pinctrl-names = "asc0", "func1", "func2", "func3";
-		pinctrl-0 = <&asc0_pins>;
-		pinctrl-1 = <&asc0_func1>;
-		pinctrl-2 = <&asc0_func2>;
-		pinctrl-3 = <&asc0_func3>;
-	};
-};
-
-&serial0 {
-	pinctrl-names = "default";
-	/* use "empty" pinctrl to leave setting from u-boot enabled */
-	pinctrl-0 = < >;
-};
-
-&i2c {
-	status = "okay";
-};
diff --git a/target/linux/lantiq/dts/FALCON-MDU.dts b/target/linux/lantiq/dts/FALCON-MDU.dts
deleted file mode 100644
index 6710bbe98e..0000000000
--- a/target/linux/lantiq/dts/FALCON-MDU.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-	model = "Lantiq Falcon / Vinax MDU Board";
-	compatible = "lantiq,falcon-mdu", "lantiq,falcon";
-
-	aliases {
-		spi0 = &ebu_cs0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;  // 64M at 0x0
-	};
-
-	mdu-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bootled_pins>;
-
-		LED_0 {
-			label = "mdu:green:gpon";
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_1 {
-			label = "mdu:green:status";
-			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_2 {
-			label = "mdu:green:2";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_3 {
-			label = "mdu:green:3";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_4 {
-			label = "mdu:green:4";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-};
-
diff --git a/target/linux/lantiq/dts/FALCON-SFP.dts b/target/linux/lantiq/dts/FALCON-SFP.dts
deleted file mode 100644
index 8d45de4ebe..0000000000
--- a/target/linux/lantiq/dts/FALCON-SFP.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-	model = "Lantiq Falcon SFP Stick";
-	compatible = "lantiq,falcon-sfp", "lantiq,falcon";
-
-	aliases {
-		spi0 = &ebu_cs0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;  // 64M at 0x0
-	};
-
-	pinctrl {
-		compatible = "lantiq,pinctrl-falcon";
-
-		asc0_func1: func1 {
-			func1_tx {
-				lantiq,pins = "io32";
-				lantiq,mux = <1>;
-				lantiq,output = <0>;
-			};
-			func1_rx {
-				lantiq,pins = "io33";
-				lantiq,mux = <0>;
-			};
-		};
-		asc0_func2: func2 {
-			func2_tx {
-				lantiq,pins = "io32";
-				lantiq,mux = <0>;
-			};
-			func2_rx {
-				lantiq,pins = "io33";
-				lantiq,mux = <1>;
-				lantiq,input = <0>;
-			};
-		};
-		asc0_func3: func3 {
-			func3_tx {
-				lantiq,pins = "io32";
-				lantiq,mux = <1>;
-				lantiq,output = <0>;
-			};
-			func3_rx {
-				lantiq,pins = "io33";
-				lantiq,mux = <1>;
-				lantiq,input = <0>;
-			};
-		};
-	};
-
-	pinselect-asc0 {
-		compatible = "lantiq,pinselect-asc0";
-		pinctrl-names = "asc0", "func1", "func2", "func3";
-		pinctrl-0 = <&asc0_pins>;
-		pinctrl-1 = <&asc0_func1>;
-		pinctrl-2 = <&asc0_func2>;
-		pinctrl-3 = <&asc0_func3>;
-	};
-};
-
-&serial0 {
-	pinctrl-names = "default";
-	/* use "empty" pinctrl to leave setting from u-boot enabled */
-	pinctrl-0 = < >;
-};
-
-&i2c {
-	status = "okay";
-};
diff --git a/target/linux/lantiq/dts/FRITZ3370.dts b/target/linux/lantiq/dts/FRITZ3370.dts
deleted file mode 100644
index ef3655de61..0000000000
--- a/target/linux/lantiq/dts/FRITZ3370.dts
+++ /dev/null
@@ -1,288 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "avm,fritz3370", "lantiq,xway", "lantiq,vr9";
-	model = "Fritz!Box WLAN 3370";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &info_green;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x8000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nand-parts@0 {
-				compatible = "lantiq,nand-xway";
-				bank-width = <2>;
-				reg = <1 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "kernel";
-						reg = <0x0 0x400000>;
-					};
-
-					partition@400000 {
-						label = "rootfs_ubi";
-						reg = <0x400000 0x3000000>;
-					};
-
-					partition@3400000 {
-						label = "vr9_firmware";
-						reg = <0x3400000 0x400000>;
-					};
-					partition@3800000 {
-						label = "reserved";
-						reg = <0x3800000 0x3000000>;
-					};
-					partition@6800000 {
-						label = "config";
-						reg = <0x6800000 0x200000>;
-					};
-					partition@6a00000 {
-						label = "nand-filesystem";
-						reg = <0x6a00000 0x1600000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				nand {
-					lantiq,groups = "nand cle", "nand ale",
-							"nand rd", "nand cs1", "nand rdy";
-					lantiq,function = "ebu";
-					lantiq,pull = <1>;
-				};
-				phy-rst {
-					lantiq,pins = "io37", "io44";
-					lantiq,pull = <0>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				pcie-rst {
-					lantiq,pins = "io38";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-			pins_spi_default: pins_spi_default {
-				spi_in {
-					lantiq,groups = "spi_di";
-					lantiq,function = "spi";
-				};
-				spi_out {
-					lantiq,groups = "spi_do", "spi_clk",
-						"spi_cs4";
-					lantiq,function = "spi";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 5 GPIO_ACTIVE_HIGH
-				&gpio 14 GPIO_ACTIVE_HIGH>;
-			lantiq,portmask = <0x3>;
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware = "lantiq/xrx200_phy11g_a14.bin";
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		power {
-			label = "power";
-			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-		};
-/*		wifi {
-			label = "wifi";
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-			linux,code = <BTN_1>;
-		};*/
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_green: power {
-			label = "fritz3370:green:power";
-			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power2 {
-			label = "fritz3370:red:power";
-			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
-		};
-		info_red {
-			label = "fritz3370:red:info";
-			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "fritz3370:green:wlan";
-			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "fritz3370:green:dsl";
-			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-		};
-		lan {
-			label = "fritz3370:green:lan";
-			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		};
-		info_green: info_green {
-			label = "fritz3370:green:info";
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_spi_default>;
-
-	status = "ok";
-
-	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <4 0>;
-		spi-max-frequency = <1000000>;
-
-		urlader: partition@0 {
-			reg = <0x0 0x20000>;
-			label = "urlader";
-			read-only;
-		};
-
-		partition@20000 {
-			reg = <0x20000 0x10000>;
-			label = "tffs (1)";
-			read-only;
-		};
-
-		partition@30000 {
-			reg = <0x30000 0x10000>;
-			label = "tffs (2)";
-			read-only;
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		mtd-mac-address = <&urlader 0x987>;
-		mtd-mac-address-increment = <(-2)>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-			gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
-		};
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <1>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-			gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
-&pcie0 {
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-
-		wifi@0,0 {
-			compatible = "pci0,0";
-			reg = <0 0 0 0 0>;
-			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/FRITZ7320.dts b/target/linux/lantiq/dts/FRITZ7320.dts
deleted file mode 100644
index 34d0df9b3b..0000000000
--- a/target/linux/lantiq/dts/FRITZ7320.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
-	model = "1&1 HomeServer";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-
-		led-internet = &info_green;
-		led-dsl = &power;
-		led-wifi = &wlan;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x1000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					ath9k_cal: partition@0 {
-						label = "urlader";
-						reg = <0x00000 0x20000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0xf60000>;
-					};
-
-					partition@f80000 {
-						label = "tffs (1)";
-						reg = <0xf80000 0x40000>;
-						read-only;
-					};
-
-					partition@fc0000 {
-						label = "tffs (2)";
-						reg = <0xfc0000 0x40000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				pci {
-					lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
-					lantiq,function = "pci";
-				};
-				pci-in {
-					lantiq,groups = "req1", "req2", "req3", "req4";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-				pci-out {
-					lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
-					lantiq,output = <1>;
-					lantiq,pull = <0>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mtd-mac-address = <&ath9k_cal 0xa91>;
-			mtd-mac-address-increment = <(-2)>;
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		dect {
-			label = "dect";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power: power {
-			label = "fritz7320:green:power";
-			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		voice {
-			label = "fritz7320:green:fon";
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-		dect {
-			label = "fritz7320:green:dect";
-			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		};
-		wlan: wlan {
-			label = "fritz7320:green:wlan";
-			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-		};
-		info_green: info_green {
-			label = "fritz7320:green:info";
-			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
-		};
-		info_red {
-			label = "fritz7320:red:info";
-			gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	req-mask = <0xf>;
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@0,0 {
-		compatible = "pci0,0";
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-	};
-};
diff --git a/target/linux/lantiq/dts/FRITZ7360SL.dts b/target/linux/lantiq/dts/FRITZ7360SL.dts
deleted file mode 100644
index b164871101..0000000000
--- a/target/linux/lantiq/dts/FRITZ7360SL.dts
+++ /dev/null
@@ -1,228 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "avm,fritz7360sl", "lantiq,xway", "lantiq,vr9";
-	model = "1&1 HomeServer";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &info_green;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x8000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x1000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					urlader: partition@0 {
-						label = "urlader";
-						reg = <0x00000 0x20000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0xf60000>;
-					};
-
-					partition@f80000 {
-						label = "tffs (1)";
-						reg = <0xf80000 0x40000>;
-						read-only;
-					};
-
-					partition@fc0000 {
-						label = "tffs (2)";
-						reg = <0xfc0000 0x40000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				phy-rst {
-					lantiq,pins = "io37", "io44";
-					lantiq,pull = <0>;
-					lantiq,open-drain;
-					lantiq,output = <1>;
-				};
-				pcie-rst {
-					lantiq,pins = "io38";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			lantiq,portmask = <0x3>;
-		};
-
-		ifxhcd@E106000 {
-			status = "okay";
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware = "lantiq/xrx200_phy11g_a22.bin";
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		dect {
-			label = "dect";
-			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_PHONE>;
-		};
-		wifi {
-			label = "wifi";
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WLAN>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_green: power {
-			label = "fritz7360sl:green:power";
-			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power2 {
-			label = "fritz7360sl:red:power";
-			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
-		};
-		info_red {
-			label = "fritz7360sl:red:info";
-			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
-		};
-		info_green: info_green {
-			label = "fritz7360sl:green:info";
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "fritz7360sl:green:wlan";
-			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-		};
-		dect {
-			label = "fritz7360sl:green:dect";
-			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		mtd-mac-address = <&urlader 0xa91>;
-		mtd-mac-address-increment = <(-2)>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rmii";
-			phy-handle = <&phy0>;
-		};
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <1>;
-			phy-mode = "rmii";
-			phy-handle = <&phy1>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0x00>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <0x01>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
-&pcie0 {
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-
-		wifi@168c,002e {
-			compatible = "pci168c,002e";
-			reg = <0 0 0 0 0>;
-			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/GIGASX76X.dts b/target/linux/lantiq/dts/GIGASX76X.dts
deleted file mode 100644
index 99ccbce296..0000000000
--- a/target/linux/lantiq/dts/GIGASX76X.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube";
-	model = "Gigaset SX761,SX762,SX763";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x0 0x30000>;
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x30000 0x10000>;
-					};
-
-					partition@40000 {
-						label = "firmware";
-						reg = <0x40000 0x7c0000>;
-					};
-				};
-			};
-
-			gpiomm: gpiomm@4000000 {
-				compatible = "lantiq,gpio-mm";
-				reg = <1 0x0 0x10 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				lantiq,shadow = <0x3>;
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-				};
-			};
-		};
-
-		gpios: stp@E100BB0 {
-			status = "okay";
-		};
-
-		etop@E180000 {
-			phy-mode = "rmii";
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		switch {
-			gpio-export,name = "switch";
-			gpio-export,output = <1>;
-			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/H201L.dts b/target/linux/lantiq/dts/H201L.dts
deleted file mode 100644
index 01016f45c9..0000000000
--- a/target/linux/lantiq/dts/H201L.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "zte,h201l", "lantiq,xway", "lantiq,ar9";
-	model = "ZTE H210L";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_green;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &online;
-		led-usb = &usb;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x20000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "uboot_env";
-						reg = <0x20000 0x10000>;
-						read-only;
-					};
-
-					partition@30000 {
-						label = "firmware";
-						reg = <0x30000 0x7d0000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "rgmii";
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 55 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_green: power {
-			label = "h201l:green:power";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		online: online {
-			label = "h201l:green:internet";
-			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "h201l:green:dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		phone {
-			label = "h201l:green:phone";
-			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "h201l:green:wps";
-			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "h201l:green:wlan";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		usb: usb {
-			label = "h201l:green:usb";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		switch {
-			gpio-export,name = "switch";
-			gpio-export,output = <1>;
-			gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
-		};
-		usb {
-			gpio-export,name = "usb";
-			gpio-export,output = <1>;
-			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
-		};
-		wifi {
-			gpio-export,name = "wifi";
-			gpio-export,output = <1>;
-			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/P2601HNFX.dts b/target/linux/lantiq/dts/P2601HNFX.dts
deleted file mode 100644
index 1b885ad841..0000000000
--- a/target/linux/lantiq/dts/P2601HNFX.dts
+++ /dev/null
@@ -1,190 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
-	model = "ZyXEL P-2601HN-Fx";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &online;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x40000>;
-						read-only;
-					};
-
-					partition@40000 {
-						label = "uboot_env";
-						reg = <0x40000 0x20000>;
-						read-only;
-					};
-
-					partition@60000 {
-						label = "firmware";
-						reg = <0x60000 0xfa0000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-				};
-				pci {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-				};
-				conf_out {
-					lantiq,pins = "io4", "io5", "io6";
-					lantiq,open-drain;
-					lantiq,pull = <0>;
-				};
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "rmii";
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		stp: stp@E100BB0 {
-			#gpio-cells = <2>;
-			compatible = "lantiq,gpio-stp-xway";
-			gpio-controller;
-			reg = <0xE100BB0 0x40>;
-
-			lantiq,shadow = <0xfff>;
-			lantiq,groups = <0x3>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_green: power {
-			label = "p2601hnfx:green:power";
-			gpios = <&stp 11 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power2 {
-			label = "p2601hnfx:red:power";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-		};
-		online: online {
-			label = "p2601hnfx:green:internet";
-			gpios = <&stp 13 GPIO_ACTIVE_LOW>;
-		};
-		online2 {
-			label = "p2601hnfx:red:internet";
-			gpios = <&stp 12 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "p2601hnfx:green:dsl";
-			gpios = <&stp 14 GPIO_ACTIVE_LOW>;
-		};
-		phone {
-			label = "p2601hnfx:green:phone";
-			gpios = <&stp 9 GPIO_ACTIVE_LOW>;
-		};
-		phone2 {
-			label = "p2601hnfx:orange:phone";
-			gpios = <&stp 8 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "p2601hnfx:green:wireless";
-			gpios = <&stp 15 GPIO_ACTIVE_LOW>;
-		};
-		wifi2 {
-			label = "p2601hnfx:orange:wireless";
-			gpios = <&stp 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		switch {
-			gpio-export,name = "switch";
-			gpio-export,output = <1>;
-			gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
-		};
-		usb {
-			gpio-export,name = "wifi";
-			gpio-export,output = <1>;
-			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/P2812HNUF1.dts b/target/linux/lantiq/dts/P2812HNUF1.dts
deleted file mode 100644
index 4a29cd9296..0000000000
--- a/target/linux/lantiq/dts/P2812HNUF1.dts
+++ /dev/null
@@ -1,72 +0,0 @@
-/dts-v1/;
-
-#include "P2812HNUFX.dtsi"
-
-/ {
-	compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
-	model = "ZyXEL P-2812HNU-F1";
-
-	aliases {
-		led-usb = &usb1;
-		led-usb2 = &usb2;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nand-parts@0 {
-				compatible = "lantiq,nand-xway";
-				lantiq,cs = <1>;
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x40000>;
-					};
-					partition@40000 {
-						label = "uboot-env";
-						reg = <0x40000 0x20000>;
-					};
-					partition@60000 {
-						label = "kernel";
-						reg = <0x60000 0x200000>;
-					};
-					partition@260000 {
-						label = "ubi";
-						reg = <0x260000 0x7da0000>;
-					};
-				};
-			};
-		};
-
-		pcie@d900000 {
-			status = "disabled";
-		};
-	};
-
-	gpio-leds {
-		usb1: usb1 {
-			label = "p2812hnuf1:green:usb1";
-			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		};
-		usb2: usb2 {
-			label = "p2812hnuf1:green:usb2";
-			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	wifi@1814,3062 {
-		compatible = "pci1814,3062";
-		reg = <0x7000 0 0 0 0>;
-		ralink,eeprom = "RT3062.eeprom";
-	};
-};
diff --git a/target/linux/lantiq/dts/P2812HNUF3.dts b/target/linux/lantiq/dts/P2812HNUF3.dts
deleted file mode 100644
index d37ad0a8e5..0000000000
--- a/target/linux/lantiq/dts/P2812HNUF3.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/dts-v1/;
-
-#include "P2812HNUFX.dtsi"
-
-/ {
-	compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
-	model = "ZyXEL P-2812HNU-F3";
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x0 0x50000>;
-						read-only;
-					};
-					partition@50000 {
-						label = "uboot-env";
-						reg = <0x50000 0x10000>;
-					};
-					partition@60000 {
-						label = "unused";
-						reg = <0x60000 0x7a0000>;
-					};
-				};
-			};
-
-			nand-parts@0 {
-				compatible = "lantiq,nand-xway";
-				lantiq,cs = <1>;
-				bank-width = <2>;
-				reg = <1 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "kernel";
-					reg = <0x0 0x200000>;
-				};
-				partition@200000 {
-					label = "ubi";
-					reg = <0x200000 0x7e00000>;
-				};
-			};
-		};
-	};
-};
-
-&pci0 {
-	wifi@1814,3092 {
-		compatible = "pci1814,3092";
-		reg = <0x7000 0 0 0 0>;
-		ralink,eeprom = "RT3092.eeprom";
-	};
-};
diff --git a/target/linux/lantiq/dts/P2812HNUFX.dtsi b/target/linux/lantiq/dts/P2812HNUFX.dtsi
deleted file mode 100644
index ec3bd1033d..0000000000
--- a/target/linux/lantiq/dts/P2812HNUFX.dtsi
+++ /dev/null
@@ -1,280 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl_green;
-		led-internet = &internet_green;
-		led-wifi = &wireless_green;
-	};
-
-	memory@0 {
-		reg = <0x0 0x8000000>;
-	};
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				exin3 {
-					lantiq,groups = "exin3";
-					lantiq,function = "exin";
-				};
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				gphy-leds {
-					lantiq,groups = "gphy0 led1", "gphy1 led1",
-							"gphy0 led2", "gphy1 led2";
-					lantiq,function = "gphy";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				pci-in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-				pci-out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <2>;
-				};
-				pcie-rst {
-					lantiq,pins = "io38";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-				ifxhcd-rst {
-					lantiq,pins = "io33";
-					lantiq,pull = <0>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				nand_out {
-					lantiq,groups = "nand cle", "nand ale";
-					lantiq,function = "ebu";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-				nand_cs1 {
-					lantiq,groups = "nand cs1";
-					lantiq,function = "ebu";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-			};
-		};
-
-		stp: stp@E100BB0 {
-			compatible = "lantiq,gpio-stp-xway";
-			reg = <0xE100BB0 0x40>;
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			lantiq,shadow = <0xffffff>;
-			lantiq,groups = <0x7>;
-			lantiq,dsl = <0x0>;
-			lantiq,phy1 = <0x0>;
-			lantiq,phy2 = <0x0>;
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-			lantiq,portmask = <0x3>;
-		};
-
-		ifxhcd@E106000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		};
-
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware1 = "lantiq/xrx200_phy11g_a14.bin";	/*VR9 1.1*/
-		firmware2 = "lantiq/xrx200_phy11g_a22.bin";	/*VR9 1.2*/
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		internet_red {
-			label = "p2812hnufx:red:internet";
-			gpios = <&stp 16 GPIO_ACTIVE_LOW>;
-		};
-		internet_green: internet_green {
-			label = "p2812hnufx:green:internet";
-			gpios = <&stp 17 GPIO_ACTIVE_LOW>;
-		};
-		dsl_green: dsl_green {
-			label = "p2812hnufx:green:dsl";
-			gpios = <&stp 18 GPIO_ACTIVE_LOW>;
-		};
-		dsl_orange {
-			label = "p2812hnufx:orange:dsl";
-			gpios = <&stp 19 GPIO_ACTIVE_LOW>;
-		};
-		wireless_orange {
-			label = "p2812hnufx:orange:wlan";
-			gpios = <&stp 20 GPIO_ACTIVE_LOW>;
-		};
-		wireless_green: wireless_green {
-			label = "p2812hnufx:green:wlan";
-			gpios = <&stp 21 GPIO_ACTIVE_LOW>;
-		};
-		power_red: power {
-			label = "p2812hnufx:red:power";
-			gpios = <&stp 22 GPIO_ACTIVE_LOW>;
-		};
-		power_green: power2 {
-			label = "p2812hnufx:green:power";
-			gpios = <&stp 23 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		phone1 {
-			label = "p2812hnufx:green:phone";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-		};
-		phone1warn {
-			label = "p2812hnufx:orange:phone";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-		};
-		phone2warn {
-			label = "p2812hnufx:orange:phone2";
-			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
-		};
-		phone2 {
-			label = "p2812hnufx:green:phone2";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		mac-address = [ 00 11 22 33 44 55 ];
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-		};
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <1>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-		ethernet@5 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <5>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy5: ethernet-phy@5 {
-			reg = <0x5>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/TDW8970.dts b/target/linux/lantiq/dts/TDW8970.dts
deleted file mode 100644
index 25eb3dac67..0000000000
--- a/target/linux/lantiq/dts/TDW8970.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "TDW89X0.dtsi"
-
-/ {
-	compatible = "tplink,tdw8970", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
-	model = "TP-LINK TD-W8970";
-};
diff --git a/target/linux/lantiq/dts/TDW8980.dts b/target/linux/lantiq/dts/TDW8980.dts
deleted file mode 100644
index def34b55bb..0000000000
--- a/target/linux/lantiq/dts/TDW8980.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-/dts-v1/;
-
-#include "TDW89X0.dtsi"
-
-/ {
-	compatible = "tplink,tdw8980", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
-	model = "TP-LINK TD-W8980";
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			state_default: pinmux {
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,output = <1>;
-					lantiq,open-drain;
-				};
-			};
-		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,bus-clock = <33333333>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		wifi2 {
-			label = "tdw8980:green:wlan5ghz";
-			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/TDW89X0.dtsi b/target/linux/lantiq/dts/TDW89X0.dtsi
deleted file mode 100644
index a629d92e4f..0000000000
--- a/target/linux/lantiq/dts/TDW89X0.dtsi
+++ /dev/null
@@ -1,274 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		/* the power led can't be controlled, use the wps led instead */
-		led-boot = &wps;
-		led-failsafe = &wps;
-
-		led-dsl = &dsl;
-		led-internet = &internet;
-		led-wifi = &wifi;
-		led-usb = &usb0;
-		led-usb2 = &usb2;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				gphy-leds {
-					lantiq,groups = "gphy0 led1", "gphy1 led1";
-					lantiq,function = "gphy";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				phy-rst {
-					lantiq,pins = "io42";
-					lantiq,pull = <0>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				pcie-rst {
-					lantiq,pins = "io38";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-			pins_spi_default: pins_spi_default {
-				spi_in {
-					lantiq,groups = "spi_di";
-					lantiq,function = "spi";
-				};
-				spi_out {
-					lantiq,groups = "spi_do", "spi_clk",
-						"spi_cs4";
-					lantiq,function = "spi";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-			lantiq,portmask = <0x3>;
-		};
-
-		ifxhcd@E106000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware = "lantiq/xrx200_phy11g_a22.bin";
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		reset {
-			label = "reset";
-			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wifi {
-			label = "wifi";
-			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RFKILL>;
-			linux,input-type = <EV_SW>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		/*
-			power is not controllable via gpio
-		*/
-		dsl: dsl {
-			label = "tdw89x0:green:dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
-		};
-		internet: internet {
-			label = "tdw89x0:green:internet";
-			gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
-		};
-		usb0: usb0 {
-			label = "tdw89x0:green:usb";
-			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
-		};
-		usb2: usb2 {
-			label = "tdw89x0:green:usb2";
-			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
-		};
-		wps: wps {
-			label = "tdw89x0:green:wps";
-			gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	wifi-leds {
-		compatible = "gpio-leds";
-
-		wifi: wifi {
-			label = "tdw89x0:green:wifi";
-			gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&spi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_spi_default>;
-
-	status = "ok";
-
-	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <4 0>;
-		spi-max-frequency = <33250000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x20000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@20000 {
-				reg = <0x20000 0x7a0000>;
-				label = "firmware";
-			};
-
-			partition@7c0000 {
-				reg = <0x7c0000 0x10000>;
-				label = "config";
-				read-only;
-			};
-
-			ath9k_cal: partition@7d0000 {
-				reg = <0x7d0000 0x30000>;
-				label = "boardconfig";
-				read-only;
-			};
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		mtd-mac-address = <&ath9k_cal 0xf100>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-			// gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-		};
-		ethernet@5 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <5>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy5: ethernet-phy@5 {
-			reg = <0x5>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
-&pcie0 {
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-
-		ath9k: wifi@168c,002e {
-			compatible = "pci168c,002e";
-			reg = <0 0 0 0 0>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			qca,no-eeprom;
-			qca,disable-5ghz;
-			mtd-mac-address = <&ath9k_cal 0xf100>;
-			mtd-mac-address-increment = <2>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/VG3503J.dts b/target/linux/lantiq/dts/VG3503J.dts
deleted file mode 100644
index 8a73de9a26..0000000000
--- a/target/linux/lantiq/dts/VG3503J.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
-	model = "BT OpenReach VDSL Modem";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			ranges = <0 0 0x0 0x3ffffff>;
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x20000>;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x7d0000>;
-					};
-
-					partition@7f0000 {
-						label = "uboot-env";
-						reg = <0x7f0000 0x10000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				gphy-leds {
-					lantiq,groups = "gphy0 led0", "gphy0 led1",
-							"gphy0 led2", "gphy1 led0",
-							"gphy1 led1", "gphy1 led2";
-					lantiq,function = "gphy";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware1 = "lantiq/xrx200_phy11g_a14.bin";	/*VR9 1.1*/
-		firmware2 = "lantiq/xrx200_phy11g_a22.bin";	/*VR9 1.2*/
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		reset {
-			label = "reset";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_red: power2 {
-			label = "vg3503j:red:power";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "vg3503j:green:dsl";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-		};
-		power_green: power {
-			label = "vg3503j:green:power";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-};
-
-&eth0 {
-	interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		lantiq,switch;
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "mii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "mii";
-			phy-handle = <&phy13>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,led1h = <0x70>;
-			lantiq,led1l = <0x00>;
-			lantiq,led2h = <0x00>;
-			lantiq,led2l = <0x03>;
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,led1h = <0x70>;
-			lantiq,led1l = <0x00>;
-			lantiq,led2h = <0x00>;
-			lantiq,led2l = <0x03>;
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi
deleted file mode 100644
index fb4486aca2..0000000000
--- a/target/linux/lantiq/dts/VGV7510KW22.dtsi
+++ /dev/null
@@ -1,253 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &internet_green;
-		led-wifi = &wifi;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
-					 &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
-					 &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
-		};
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x1000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					boardconfig: partition@fe0000 {
-						label = "board_config";
-						reg = <0xfe0000 0x20000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				gphy-leds {
-					lantiq,groups = "gphy0 led0", "gphy0 led1",
-							"gphy1 led0", "gphy1 led1";
-					lantiq,function = "gphy";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <2>;
-					lantiq,output = <1>;
-				};
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				pci-rst {
-					lantiq,pins = "io21";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		pcie@d900000 {
-			status = "disabled";
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware1 = "lantiq/xrx200_phy22f_a14.bin";	/*VR9 1.1*/
-		firmware2 = "lantiq/xrx200_phy22f_a22.bin";	/*VR9 1.2*/
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		dsl: dsl {
-			label = "vgv7510kw22:green:dsl";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-		};
-
-		internet_red {
-			label = "vgv7510kw22:red:internet";
-			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-		};
-
-		info_red {
-			label = "vgv7510kw22:red:info";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-		};
-
-		power_green: power {
-			label = "vgv7510kw22:green:power";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		info_green {
-			label = "vgv7510kw22:green:info";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-
-		internet_green: internet_green {
-			label = "vgv7510kw22:green:internet";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-		};
-
-		wifi: wifi {
-			label = "vgv7510kw22:green:wlan";
-			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-		};
-
-		power_red: power2 {
-			label = "vgv7510kw22:red:power";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-		};
-
-		phone {
-			label = "vgv7510kw22:green:telefon";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@1814,3592 {
-		compatible = "pci1814,3592";
-		reg = <0x7000 0 0 0 0>;
-		ralink,mtd-eeprom = <&boardconfig 0x410>;
-		ralink,mtd-eeprom-swap;
-		mtd-mac-address = <&boardconfig 0x16>;
-		mtd-mac-address-increment = <1>;
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		mtd-mac-address = <&boardconfig 0x16>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "mii";
-			phy-handle = <&phy1>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "mii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <3>;
-			phy-mode = "mii";
-			phy-handle = <&phy12>;
-		};
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "mii";
-			phy-handle = <&phy13>;
-		};
-		ethernet@5 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <5>;
-			phy-mode = "mii";
-			phy-handle = <&phy14>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy12: ethernet-phy@12 {
-			reg = <0x12>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy14: ethernet-phy@14 {
-			reg = <0x14>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/VGV7510KW22BRN.dts b/target/linux/lantiq/dts/VGV7510KW22BRN.dts
deleted file mode 100644
index d0be62f632..0000000000
--- a/target/linux/lantiq/dts/VGV7510KW22BRN.dts
+++ /dev/null
@@ -1,67 +0,0 @@
-/dts-v1/;
-
-#include "VGV7510KW22.dtsi"
-
-/ {
-	compatible = "arcadyan,vgv7510kw22-brn", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
-	model = "o2 Box 6431";
-
-	sram@1F000000 {
-		cgu@103000 {
-			lantiq,phy-clk-src = <0x2>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				partitions {
-					partition@0 {
-						label = "Boot";
-						reg = <0x00000 0x40000>;
-						read-only;
-					};
-
-					partition@40000 {
-						label = "Configuration";
-						reg = <0x40000 0x40000>;
-						read-only;
-					};
-
-					partition@80000 {
-						label = "Certificate";
-						reg = <0x80000 0x20000>;
-						read-only;
-					};
-
-					partition@a0000 {
-						label = "Special_Area";
-						reg = <0xa0000 0x20000>;
-						read-only;
-					};
-
-					partition@c0000 {
-						compatible = "brnboot,root-selector";
-						label = "Primary_Setting";
-						reg = <0xc0000 0x20000>;
-						read-only;
-					};
-
-					partition@e0000 {
-						label = "Code_Image_0";
-						reg = <0xe0000 0x780000>;
-						brnboot,root-id = <0x00>;
-						read-only;
-					};
-
-					partition@860000 {
-						label = "Code_Image_1";
-						reg = <0x860000 0x780000>;
-						brnboot,root-id = <0x01>;
-						read-only;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/VGV7510KW22NOR.dts b/target/linux/lantiq/dts/VGV7510KW22NOR.dts
deleted file mode 100644
index 1d21e14f0a..0000000000
--- a/target/linux/lantiq/dts/VGV7510KW22NOR.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/dts-v1/;
-
-#include "VGV7510KW22.dtsi"
-
-/ {
-	compatible = "arcadyan,vgv7510kw22-nor", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
-	model = "o2 Box 6431";
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				partitions {
-					partition@0 {
-						label = "uboot";
-						reg = <0x0 0x60000>; /* 384 KiB */
-						read-only;
-					};
-
-					partition@60000 {
-						label = "uboot-env";
-						reg = <0x60000 0x20000>; /* 128 KiB */
-						read-only;
-					};
-
-					partition@80000 {
-						label = "firmware";
-						reg = <0x80000 0xf60000>; /* 15744 KiB */
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/VGV7519.dtsi b/target/linux/lantiq/dts/VGV7519.dtsi
deleted file mode 100644
index e807b52715..0000000000
--- a/target/linux/lantiq/dts/VGV7519.dtsi
+++ /dev/null
@@ -1,298 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &broadband_green;
-		led-internet = &internet_green;
-		led-wifi = &wireless_green;
-	};
-
-	sram@1F000000 {
-	        vmmc@107000 {
-	                status = "okay";
-	                gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
-	                         &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
-	                         &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
-	        };
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					boardconfig: partition@40000 {
-						label = "board_config";
-						reg = <0x40000 0x10000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-					lantiq,pull = <0>;
-				};
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				pci-rst {
-					lantiq,pins = "io21";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-				gphy-leds {
-					lantiq,groups = "gphy0 led1", "gphy1 led0";
-					lantiq,function = "gphy";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		stp: stp@E100BB0 {
-			compatible = "lantiq,gpio-stp-xway";
-			reg = <0xE100BB0 0x40>;
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			lantiq,shadow = <0xffff>;
-			lantiq,groups = <0x3>;
-			lantiq,dsl = <0x0>;
-			lantiq,phy1 = <0x0>;
-			lantiq,phy2 = <0x0>;
-			/* lantiq,rising; */
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
-			lantiq,portmask = <0x3>;
-		};
-
-		ifxhcd@E106000 {
-			status = "okay";
-			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
-		};
-
-		pcie@d900000 {
-			status = "disabled";
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware1 = "lantiq/xrx200_phy11g_a14.bin";	/*VR9 1.1*/
-		firmware2 = "lantiq/xrx200_phy11g_a22.bin";	/*VR9 1.2*/
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		reset {
-			label = "reset";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		eco {
-			label = "eco";
-			gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		eco {
-			label = "vgv7519:blue:eco";
-			gpios = <&stp 2 GPIO_ACTIVE_LOW>;
-		};
-		wps_red {
-			label = "vgv7519:red:wps";
-			gpios = <&stp 3 GPIO_ACTIVE_LOW>;
-		};
-		wps_green {
-			label = "vgv7519:green:wps";
-			gpios = <&stp 4 GPIO_ACTIVE_LOW>;
-		};
-		upgrade {
-			label = "vgv7519:blue:upgrade";
-			gpios = <&stp 5 GPIO_ACTIVE_LOW>;
-		};
-		tv {
-			label = "vgv7519:green:tv";
-			gpios = <&stp 6 GPIO_ACTIVE_LOW>;
-		};
-		internet_green: internet_green {
-			label = "vgv7519:green:internet";
-			gpios = <&stp 7 GPIO_ACTIVE_LOW>;
-		};
-		internet_red {
-			label = "vgv7519:red:internet";
-			gpios = <&stp 8 GPIO_ACTIVE_LOW>;
-		};
-		broadband_red {
-			label = "vgv7519:red:broadband";
-			gpios = <&stp 9 GPIO_ACTIVE_LOW>;
-		};
-		broadband_green: broadband_green {
-			label = "vgv7519:green:broadband";
-			gpios = <&stp 10 GPIO_ACTIVE_LOW>;
-		};
-		voice {
-			label = "vgv7519:green:voice";
-			gpios = <&stp 11 GPIO_ACTIVE_LOW>;
-		};
-		wireless_red {
-			label = "vgv7519:red:wireless";
-			gpios = <&stp 12 GPIO_ACTIVE_LOW>;
-		};
-		wireless_green: wireless_green {
-			label = "vgv7519:green:wireless";
-			gpios = <&stp 13 GPIO_ACTIVE_LOW>;
-		};
-		power_green: power2 {
-			label = "vgv7519:green:power";
-			gpios = <&stp 14 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power {
-			label = "vgv7519:red:power";
-			gpios = <&stp 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@1814,3091 {
-		compatible = "pci1814,3091";
-		reg = <0x7000 0 0 0 0>;
-		ralink,mtd-eeprom = <&boardconfig 0x410>;
-		ralink,mtd-eeprom-swap;
-		mtd-mac-address = <&boardconfig 0x16>;
-		mtd-mac-address-increment = <1>;
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		mtd-mac-address = <&boardconfig 0x16>;
-		mtd-mac-address-increment = <1>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-		};
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <1>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-		ethernet@5 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <5>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy5: ethernet-phy@5 {
-			reg = <0x5>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/VGV7519BRN.dts b/target/linux/lantiq/dts/VGV7519BRN.dts
deleted file mode 100644
index f30d2f920e..0000000000
--- a/target/linux/lantiq/dts/VGV7519BRN.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-/dts-v1/;
-
-
-#include "VGV7519.dtsi"
-
-/ {
-	compatible = "arcadyan,vgv7519-brn", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
-	model = "KPN Experiabox V8";
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				partitions {
-					partition@0 {
-						label = "Boot";
-						reg = <0x00000 0x40000>;
-						read-only;
-					};
-
-					partition@50000 {
-						label = "Certificate";
-						reg = <0x50000 0x10000>;
-						read-only;
-					};
-					partition@60000 {
-						label = "Special_Area";
-						reg = <0x60000 0x10000>;
-						read-only;
-					};
-
-					partition@70000 {
-						label = " Reserve_0";
-						reg = <0x70000 0x10000>;
-						read-only;
-					};
-
-					partition@80000 {
-						label = "Code_Image_0";
-						reg = <0x80000 0x780000>;
-						brnboot,root-id = <0x00>;
-						read-only;
-					};
-
-					partition@4000000 {
-						compatible = "brnboot,root-selector";
-						label = "Primary_Setting";
-						reg = <0x4000000 0x10000>;
-						read-only;
-					};
-
-					partition@4010000 {
-						label = "Configuration";
-						reg = <0x4010000 0x60000>;
-						read-only;
-					};
-
-					partition@4070000 {
-						label = " Reserve_1";
-						reg = <0x4070000 0x10000>;
-						read-only;
-					};
-
-					partition@4080000 {
-						label = "Code_Image_1";
-						reg = <0x4080000 0x780000>;
-						brnboot,root-id = <0x01>;
-						read-only;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/VGV7519NOR.dts b/target/linux/lantiq/dts/VGV7519NOR.dts
deleted file mode 100644
index ec548fbe72..0000000000
--- a/target/linux/lantiq/dts/VGV7519NOR.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-/dts-v1/;
-
-
-#include "VGV7519.dtsi"
-
-/ {
-	compatible = "arcadyan,vgv7519-nor", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
-	model = "KPN Experiabox V8";
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				partitions {
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x40000>;
-						read-only;
-					};
-					partition@60000 {
-						label = "uboot_env";
-						reg = <0x60000 0x10000>;
-						read-only;
-					};
-					partition@80000 {
-						label = "firmware";
-						reg = <0x80000 0xf80000>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/VR200v.dts b/target/linux/lantiq/dts/VR200v.dts
deleted file mode 100644
index 6eccc5bdd9..0000000000
--- a/target/linux/lantiq/dts/VR200v.dts
+++ /dev/null
@@ -1,283 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
-	model = "TP-LINK Archer VR200v";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-
-		led-dsl = &dsl;
-		led-internet = &internet;
-		led-usb = &usb;
-		led-usb2 = &usb;
-	};
-
-	memory@0 {
-		reg = <0x0 0x7f00000>;
-	};
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				gphy-leds {
-					lantiq,groups = "gphy0 led1", "gphy1 led1";
-					lantiq,function = "gphy";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				phy-rst {
-					lantiq,pins = "io42";
-					lantiq,pull = <0>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				pcie-rst {
-					lantiq,pins = "io38";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-			pins_spi_default: pins_spi_default {
-				spi_in {
-					lantiq,groups = "spi_di";
-					lantiq,function = "spi";
-				};
-				spi_out {
-					lantiq,groups = "spi_do", "spi_clk",
-						"spi_cs4";
-					lantiq,function = "spi";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-			lantiq,portmask = <0x3>;
-		};
-
-		ifxhcd@E106000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		};
-
-		pci0: pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware = "lantiq/xrx200_phy11g_a22.bin";
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		reset {
-			label = "reset";
-			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wifi {
-			label = "wifi";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RFKILL>;
-			linux,input-type = <EV_SW>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		dect_paging {
-			label = "dect_paging";
-			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power: power {
-			label = "vr200v:blue:power";
-			gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "vr200v:blue:dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		internet: internet {
-			label = "vr200v:blue:internet";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		usb: usb {
-			label = "vr200v:blue:usb";
-			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
-		};
-		eth {
-			label = "vr200v:blue:lan";
-			gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
-		};
-		wlan {
-			label = "vr200v:blue:wlan";
-			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-		};
-		wlan5g {
-			label = "vr200v:blue:wlan5g";
-			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-		};
-		phone {
-			label = "vr200v:blue:phone";
-			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_spi_default>;
-
-	status = "ok";
-
-	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <4 0>;
-		spi-max-frequency = <33250000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x20000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@20000 {
-				reg = <0x20000 0xf90000>;
-				label = "firmware";
-			};
-
-			partition@fb0000 {
-				reg = <0xfb0000 0x10000>;
-				label = "radioDECT";
-				read-only;
-			};
-
-			partition@fc0000 {
-				reg = <0xfc0000 0x10000>;
-				label = "config";
-				read-only;
-			};
-
-			romfile: partition@fd0000 {
-				reg = <0xfd0000 0x10000>;
-				label = "romfile";
-				read-only;
-			};
-
-			partition@fe0000 {
-				reg = <0xfe0000 0x10000>;
-				label = "rom";
-				read-only;
-			};
-
-			partition@ff0000 {
-				reg = <0xff0000 0x10000>;
-				label = "radio";
-				read-only;
-			};
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		mtd-mac-address = <&romfile 0xf100>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-			// gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-		};
-		ethernet@5 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <5>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy5: ethernet-phy@5 {
-			reg = <0x5>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/WBMR.dts b/target/linux/lantiq/dts/WBMR.dts
deleted file mode 100644
index fab99d00e7..0000000000
--- a/target/linux/lantiq/dts/WBMR.dts
+++ /dev/null
@@ -1,185 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9";
-	model = "Buffalo WBMR-HP-G300H";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &online_green;
-		led-usb = &usb;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x40000>;
-						read-only;
-					};
-
-					partition@40000 {
-						label = "uboot_env";
-						reg = <0x40000 0x20000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x60000 0x1f20000>;
-					};
-
-					boardconfig: partition@1fc0000 {
-						label = "board";
-						reg = <0x1fc0000 0x20000>;
-						read-only;
-					};
-
-					partition@1fe0000 {
-						label = "calibration";
-						reg = <0x1fe0000 0x20000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				pci-in {
-					lantiq,groups = "req1";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-				pci-out {
-					lantiq,groups = "gnt1";
-					lantiq,output = <1>;
-					lantiq,pull = <0>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "rgmii";
-			mtd-mac-address = <&boardconfig 0x10024>;
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
-		};
-
-		pci@E105400 {
-			status = "okay";
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		eject {
-			label = "eject";
-			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_EJECTCD>;
-		};
-		movie {
-			label = "movie";
-			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VIDEO>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_green: power {
-			label = "wbmr:green:power";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power2 {
-			label = "wbmr:red:power";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		security {
-			label = "wbmr:yellow:security";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "wbmr:green:wireless";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "wbmr:green:dsl";
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-		online_green: online {
-			label = "wbmr:green:internet";
-			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-		};
-		online2 {
-			label = "wbmr:red:internet";
-			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-		};
-		movie {
-			label = "wbmr:blue:movie";
-			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-		};
-		usb: usb {
-			label = "wbmr:green:usb";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/WBMR300.dts b/target/linux/lantiq/dts/WBMR300.dts
deleted file mode 100644
index 2ecfe4bc92..0000000000
--- a/target/linux/lantiq/dts/WBMR300.dts
+++ /dev/null
@@ -1,306 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9";
-	model = "Buffalo WBMR-300HPD";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_g;
-		led-failsafe = &diag_r;
-		led-running = &power_g;
-
-		led-dsl = &dsl;
-		led-internet = &router_g;
-		led-wifi = &wifi_g;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				phy-rst {
-					lantiq,pins = "io42";
-					lantiq,pull = <0>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				pcie-rst {
-					lantiq,pins = "io38";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-			pins_spi_default: pins_spi_default {
-				spi_in {
-					lantiq,groups = "spi_di";
-					lantiq,function = "spi";
-				};
-				spi_out {
-					lantiq,groups = "spi_do", "spi_clk",
-						"spi_cs4";
-					lantiq,function = "spi";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-			lantiq,portmask = <0x3>;
-		};
-
-		ifxhcd@E106000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware = "lantiq/xrx200_phy22f_a22.bin";
-		phys = [ 00 01 ];
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		power {
-			label = "power";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		auto {
-			label = "auto";
-			gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-		};
-
-		router {
-			label = "router";
-			gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <BTN_1>;
-			linux,input-type = <EV_SW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		diag_r: diag_r {
-			label = "wbmr300:red:diag";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-			default_state = "off";
-		};
-
-		wifi_g: wifi_g {
-			label = "wbmr300:green:wifi";
-			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		dsl: dsl {
-			label = "dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		router_y: router_y {
-			label = "wbmr300:yellow:router";
-			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		wifi_y: wifi_y {
-			label = "wbmr300:yellow:wifi";
-			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan1: lan1 {
-			label = "wbmr300:green:lan1";
-			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan: wan {
-			label = "wbmr300:green:wan";
-			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan3: lan3 {
-			label = "wbmr300:green:lan3";
-			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan2: lan2 {
-			label = "wbmr300:green:lan2";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		};
-
-		internet_g: internet_g {
-			label = "wbmr300:green:internet";
-			gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
-		};
-
-		internet_y: internet_y {
-			label = "wbmr300:yellow:internet";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-		};
-
-		router_g: router_g {
-			label = "wbmr300:green:router";
-			gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_g: power_g {
-			label = "wbmr300:green:power";
-			gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&spi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_spi_default>;
-
-	status = "ok";
-	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <4 0>;
-		spi-max-frequency = <20000000>;
-
-		partition@0 {
-			reg = <0x0 0x10000>;
-			label = "u-boot";
-			read-only;
-		};
-
-		partition@10000 {
-			reg = <0x10000 0x10000>;
-			label = "gphyfirmware";
-			read-only;
-		};
-
-		partition@20000 {
-			reg = <0x20000 0x80000>;
-			label = "dsl_fw";
-		};
-
-		partition@de0000 {
-			reg = <0xa0000 0xf40000>;
-			label = "firmware";
-		};
-
-		partition@fe0000 {
-			reg = <0xfe0000 0x10000>;
-			label = "sysconfig";
-			read-only;
-		};
-
-		partition@ff0000 {
-			reg = <0xff0000 0x2000>;
-			label = "ubootconfig";
-		};
-
-		partition@ff3000 {
-			reg = <0xff3000 0x2000>;
-			label = "board_config";
-			read-only;
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		lantiq,switch;
-
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "mii";
-			phy-handle = <&phy13>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <5>;
-			phy-mode = "mii";
-			phy-handle = <&phy14>;
-		};
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "mii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <3>;
-			phy-mode = "mii";
-			phy-handle = <&phy12>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy12: ethernet-phy@12 {
-			reg = <0x12>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy14: ethernet-phy@14 {
-			reg = <0x14>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/amazonse.dtsi b/target/linux/lantiq/dts/amazonse.dtsi
deleted file mode 100644
index e6925a3adf..0000000000
--- a/target/linux/lantiq/dts/amazonse.dtsi
+++ /dev/null
@@ -1,174 +0,0 @@
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "lantiq,xway", "lantiq,ase";
-
-	aliases {
-		serial0 = &asc1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips4Kc";
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-	};
-
-	biu@1F800000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,biu", "simple-bus";
-		reg = <0x1F800000 0x800000>;
-		ranges = <0x0 0x1F800000 0x7FFFFF>;
-
-		icu0: icu@80200 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,icu";
-			reg = <0x80200 0x28
-				0x80228 0x28
-				0x80250 0x28
-				0x80278 0x28
-				0x802a0 0x28>;
-		};
-
-		watchdog@803F0 {
-			compatible = "lantiq,wdt";
-			reg = <0x803F0 0x10>;
-		};
-	};
-
-	sram@1F000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,sram", "simple-bus";
-		reg = <0x1F000000 0x800000>;
-		ranges = <0x0 0x1F000000 0x7FFFFF>;
-
-		eiu0: eiu@101000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,eiu-xway";
-			reg = <0x101000 0x1000>;
-			interrupt-parent = <&icu0>;
-			lantiq,eiu-irqs = <29 30 31>;
-		};
-
-		pmu0: pmu@102000 {
-			compatible = "lantiq,pmu-xway";
-			reg = <0x102000 0x1000>;
-		};
-
-		cgu0: cgu@103000 {
-			compatible = "lantiq,cgu-xway";
-			reg = <0x103000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		rcu0: rcu@203000 {
-			compatible = "lantiq,rcu-xway";
-			reg = <0x203000 0x1000>;
-		};
-	};
-
-	fpi@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,fpi", "simple-bus";
-		ranges = <0x0 0x10000000 0xEEFFFFF>;
-		reg = <0x10000000 0xEF00000>;
-
-		localbus@0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-				1 0 0x4000000 0x4000010>; /* addsel1 */
-			compatible = "lantiq,localbus", "simple-bus";
-		};
-
-		spi@E100800 {
-			compatible = "lantiq,ase-spi";
-			reg = <0xE100800 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <24 25 26>;
-			interrupt-names = "spi_rx", "spi_tx", "spi_err",
-					"spi_frm";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		gptu@E100A00 {
-			compatible = "lantiq,gptu-xway";
-			reg = <0xE100A00 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <33 34 35 36 37 38>;
-		};
-
-		gpio: pinmux@E100B10 {
-			compatible = "lantiq,ase-pinctrl";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100B10 0xA0>;
-		};
-
-		asc1: serial@E100C00 {
-			compatible = "lantiq,asc";
-			reg = <0xE100C00 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <72 74 75>;
-		};
-
-		mei@E116000 {
-			compatible = "lantiq,mei-xway";
-			interrupt-parent = <&icu0>;
-			interrupts = <81>;
-		};
-
-		ifxhcd@E101000 {
-			compatible = "lantiq,ase-usb", "lantiq,ifxhcd-ase";
-			reg = <0xE101000 0x1000
-				0xE120000 0x3f000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <39>;
-			dr_mode = "host";
-			status = "disabled";
-		};
-
-		dma0: dma@E104100 {
-			compatible = "lantiq,dma-xway";
-			reg = <0xE104100 0x800>;
-		};
-
-		ebu0: ebu@E105300 {
-			compatible = "lantiq,ebu-xway";
-			reg = <0xE105300 0x100>;
-		};
-
-		ppe@E234000 {
-			compatible = "lantiq,ppe-ase";
-			interrupt-parent = <&icu0>;
-			interrupts = <85>;
-		};
-
-		etop@E180000 {
-			compatible = "lantiq,etop-xway";
-			reg = <0xE180000 0x40000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <105 109>;
-		};
-	};
-
-	adsl {
-		compatible = "lantiq,adsl-ase";
-	};
-};
diff --git a/target/linux/lantiq/dts/ar9.dtsi b/target/linux/lantiq/dts/ar9.dtsi
deleted file mode 100644
index 2638a4b268..0000000000
--- a/target/linux/lantiq/dts/ar9.dtsi
+++ /dev/null
@@ -1,216 +0,0 @@
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "lantiq,xway", "lantiq,ar9";
-
-	aliases {
-		serial0 = &asc1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips34K";
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-	};
-
-	biu@1F800000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,biu", "simple-bus";
-		reg = <0x1F800000 0x800000>;
-		ranges = <0x0 0x1F800000 0x7FFFFF>;
-
-		icu0: icu@80200 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,icu";
-			reg = <0x80200 0x28
-				0x80228 0x28
-				0x80250 0x28
-				0x80278 0x28
-				0x802a0 0x28>;
-		};
-
-		watchdog@803F0 {
-			compatible = "lantiq,wdt";
-			reg = <0x803F0 0x10>;
-		};
-	};
-
-	sram@1F000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,sram", "simple-bus";
-		reg = <0x1F000000 0x800000>;
-		ranges = <0x0 0x1F000000 0x7FFFFF>;
-
-		eiu0: eiu@101000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,eiu-xway";
-			reg = <0x101000 0x1000>;
-			interrupt-parent = <&icu0>;
-			lantiq,eiu-irqs = <166 135 66 40 41 42>;
-		};
-
-		pmu0: pmu@102000 {
-			compatible = "lantiq,pmu-xway";
-			reg = <0x102000 0x1000>;
-		};
-
-		cgu0: cgu@103000 {
-			compatible = "lantiq,cgu-xway";
-			reg = <0x103000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		rcu0: rcu@203000 {
-			compatible = "lantiq,rcu-xway";
-			reg = <0x203000 0x1000>;
-		};
-	};
-
-	fpi@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,fpi", "simple-bus";
-		ranges = <0x0 0x10000000 0xEEFFFFF>;
-		reg = <0x10000000 0xEF00000>;
-
-		localbus@0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-				1 0 0x4000000 0x4000010>; /* addsel1 */
-			compatible = "lantiq,localbus", "simple-bus";
-		};
-
-		gptu@E100A00 {
-			compatible = "lantiq,gptu-xway";
-			reg = <0xE100A00 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <126 127 128 129 130 131>;
-		};
-
-		asc0: serial@E100400 {
-			compatible = "lantiq,asc";
-			reg = <0xE100400 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <104 105 106>;
-			status = "disabled";
-		};
-
-		spi: spi@E100800 {
-			compatible = "lantiq,xrx100-spi";
-			reg = <0xE100800 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <22 23 24>;
-			interrupt-names = "spi_rx", "spi_tx", "spi_err",
-					"spi_frm";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		gpio: pinmux@E100B10 {
-			compatible = "lantiq,xrx100-pinctrl";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100B10 0xA0>;
-		};
-
-		asc1: serial@E100C00 {
-			compatible = "lantiq,asc";
-			reg = <0xE100C00 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <112 113 114>;
-		};
-
-		ifxhcd@E101000 {
-			compatible = "lantiq,arx100-usb", "lantiq,ifxhcd-arx100";
-			reg = <0xE101000 0x1000
-				0xE120000 0x3f000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <62 91>;
-			dr_mode = "host";
-			status = "disabled";
-		};
-
-		ifxhcd@E106000 {
-			compatible = "lantiq,arx100-usb";
-			reg = <0xE106000 0x1000
-				0xE1E0000 0x3f000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <91>;
-			dr_mode = "host";
-			status = "disabled";
-		};
-
-		deu@E103100 {
-			compatible = "lantiq,deu-arx100";
-			reg = <0xE103100 0xf00>;
-		};
-
-		dma0: dma@E104100 {
-			compatible = "lantiq,dma-xway";
-			reg = <0xE104100 0x800>;
-		};
-
-		ebu0: ebu@E105300 {
-			compatible = "lantiq,ebu-xway";
-			reg = <0xE105300 0x100>;
-		};
-
-		mei@E116000 {
-			compatible = "lantiq,mei-xway";
-			interrupt-parent = <&icu0>;
-			interrupts = <63>;
-		};
-
-		etop@E180000 {
-			compatible = "lantiq,etop-xway";
-			reg = <0xE180000 0x40000
-				0xE108000 0x200>;
-			interrupt-parent = <&icu0>;
-			interrupts = <73 72>;
-			mac-address = [ 00 11 22 33 44 55 ];
-		};
-
-		ppe@E234000 {
-			compatible = "lantiq,ppe-arx100";
-			interrupt-parent = <&icu0>;
-			interrupts = <96>;
-		};
-
-		pci0: pci@E105400 {
-			status = "disabled";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			compatible = "lantiq,pci-xway";
-			bus-range = <0x0 0x0>;
-			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
-				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>;	/* io space */
-			reg = <0x7000000 0x8000		/* config space */
-				0xE105400 0x400>;	/* pci bridge */
-			lantiq,bus-clock = <33333333>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
-			req-mask = <0x1>;
-		};
-	};
-
-	adsl {
-		compatible = "lantiq,adsl-arx100";
-	};
-};
diff --git a/target/linux/lantiq/dts/danube.dtsi b/target/linux/lantiq/dts/danube.dtsi
deleted file mode 100644
index 83e85c36a5..0000000000
--- a/target/linux/lantiq/dts/danube.dtsi
+++ /dev/null
@@ -1,212 +0,0 @@
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "lantiq,xway", "lantiq,danube";
-
-	aliases {
-		serial0 = &asc1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips24Kc";
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-	};
-
-	biu@1F800000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,biu", "simple-bus";
-		reg = <0x1F800000 0x800000>;
-		ranges = <0x0 0x1F800000 0x7FFFFF>;
-
-		icu0: icu@80200 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,icu";
-			reg = <0x80200 0x28
-				0x80228 0x28
-				0x80250 0x28
-				0x80278 0x28
-				0x802a0 0x28>;
-		};
-
-		watchdog@803F0 {
-			compatible = "lantiq,wdt";
-			reg = <0x803F0 0x10>;
-		};
-	};
-
-	sram@1F000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,sram", "simple-bus";
-		reg = <0x1F000000 0x800000>;
-		ranges = <0x0 0x1F000000 0x7FFFFF>;
-
-		eiu0: eiu@101000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,eiu-xway";
-			reg = <0x101000 0x1000>;
-			interrupt-parent = <&icu0>;
-			lantiq,eiu-irqs = <166 135 66>;
-		};
-
-		pmu0: pmu@102000 {
-			compatible = "lantiq,pmu-xway";
-			reg = <0x102000 0x1000>;
-		};
-
-		cgu0: cgu@103000 {
-			compatible = "lantiq,cgu-xway";
-			reg = <0x103000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		vmmc@107000 {
-			status = "disabled";
-			compatible = "lantiq,vmmc-xway";
-			reg = <0x103000 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <150 151 152 153 154 155>;
-		};
-
-		rcu0: rcu@203000 {
-			compatible = "lantiq,rcu-xway";
-			reg = <0x203000 0x1000>;
-		};
-	};
-
-	fpi@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,fpi", "simple-bus";
-		ranges = <0x0 0x10000000 0xEEFFFFF>;
-		reg = <0x10000000 0xEF00000>;
-
-		localbus@0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-				1 0 0x4000000 0x4000010>; /* addsel1 */
-			compatible = "lantiq,localbus", "simple-bus";
-		};
-
-		gptu@E100A00 {
-			compatible = "lantiq,gptu-xway";
-			reg = <0xE100A00 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <126 127 128 129 130 131>;
-		};
-
-		gpios: stp@E100BB0 {
-			#gpio-cells = <2>;
-			compatible = "lantiq,gpio-stp-xway";
-			gpio-controller;
-			reg = <0xE100BB0 0x40>;
-			lantiq,shadow = <0xfff>;
-			lantiq,groups = <0x3>;
-			status = "disabled";
-		};
-
-		asc0: serial@E100400 {
-			compatible = "lantiq,asc";
-			reg = <0xE100400 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <104 105 106>;
-			status = "disabled";
-		};
-
-		gpio: pinmux@E100B10 {
-			compatible = "lantiq,danube-pinctrl";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100B10 0xA0>;
-		};
-
-		asc1: serial@E100C00 {
-			compatible = "lantiq,asc";
-			reg = <0xE100C00 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <112 113 114>;
-		};
-
-		ifxhcd@E101000 {
-			compatible = "lantiq,danube-usb", "lantiq,ifxhcd-danube";
-			reg = <0xE101000 0x1000
-				0xE120000 0x3f000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <62>;
-			dr_mode = "host";
-			status = "disabled";
-		};
-
-		deu@E103100 {
-			compatible = "lantiq,deu-danube";
-			reg = <0xE103100 0xf00>;
-		};
-
-		dma0: dma@E104100 {
-			compatible = "lantiq,dma-xway";
-			reg = <0xE104100 0x800>;
-		};
-
-		ebu0: ebu@E105300 {
-			compatible = "lantiq,ebu-xway";
-			reg = <0xE105300 0x100>;
-		};
-
-		mei@E116000 {
-			compatible = "lantiq,mei-xway";
-			interrupt-parent = <&icu0>;
-			interrupts = <63>;
-		};
-
-		etop@E180000 {
-			compatible = "lantiq,etop-xway";
-			reg = <0xE180000 0x40000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <73 78>;
-			mac-address = [ 00 11 22 33 44 55 ];
-		};
-
-		ppe@E234000 {
-			compatible = "lantiq,ppe-danube";
-			interrupt-parent = <&icu0>;
-			interrupts = <96>;
-		};
-
-		pci0: pci@E105400 {
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			compatible = "lantiq,pci-xway";
-			bus-range = <0x0 0x0>;
-			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
-				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>;	/* io space */
-			reg = <0x7000000 0x8000		/* config space */
-				0xE105400 0x400>;	/* pci bridge */
-			lantiq,bus-clock = <33333333>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
-			req-mask = <0x1>; /* GNT1 */
-		};
-	};
-
-	adsl {
-		compatible = "lantiq,adsl-danube";
-	};
-};
diff --git a/target/linux/lantiq/dts/falcon-sflash-16M.dtsi b/target/linux/lantiq/dts/falcon-sflash-16M.dtsi
deleted file mode 100644
index d95acc21ef..0000000000
--- a/target/linux/lantiq/dts/falcon-sflash-16M.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-
-&ebu_cs0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "lantiq,sflash-falcon", "simple-bus";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl129p0", "spansion,s25fl129p1";
-		reg = <0 0>;
-		linux,mtd-name = "sflash";
-		spi-max-frequency = <80000000>;
-		m25p,fast-read;
-
-		partition@0 {
-			reg = <0x0 0x40000>;
-			label = "uboot";
-			read-only;
-		};
-
-		partition@40000 {
-			reg = <0x40000 0x80000>;
-			label = "uboot_env";
-		};
-
-		partition@C0000 {
-			reg = <0xC0000 0x740000>;
-			label = "image0";
-		};
-
-		partition@800000 {
-			reg = <0x800000 0x800000>;
-			label = "image1";
-		};
-	};
-};
diff --git a/target/linux/lantiq/dts/falcon.dtsi b/target/linux/lantiq/dts/falcon.dtsi
deleted file mode 100644
index 98f71819a2..0000000000
--- a/target/linux/lantiq/dts/falcon.dtsi
+++ /dev/null
@@ -1,392 +0,0 @@
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "lantiq,falcon";
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips34kc";
-		};
-	};
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		gpio4 = &gpio4;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	clocks {
-		compatible = "simple-bus";
-
-		cpu_clk: cpu {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <400000000>;
-			clock-output-names = "cpu";
-		};
-
-		io_clk: io {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-			clock-output-names = "io";
-		};
-
-		fpi_clk: fpi {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <100000000>;
-			clock-output-names = "fpi";
-		};
-	};
-
-	ebu_cs0: localbus@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,localbus", "simple-bus";
-		reg = <0x10000000 0x4000000>;
-		ranges = <0x0 0x10000000 0x4000000>;
-	};
-	ebu_cs1: localbus@14000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,localbus", "simple-bus";
-		reg = <0x14000000 0x4000000>;
-		ranges = <0x0 0x14000000 0x4000000>;
-	};
-
-	ebu@18000000 {
-		compatible = "lantiq,ebu-falcon";
-		reg = <0x18000000 0x100>;
-	};
-
-	sbs2@1D000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,sysb2", "simple-bus";
-		reg = <0x1D000000 0x1000000>;
-		ranges = <0x0 0x1D000000 0x1000000>;
-
-		clock_sysgpe: clock-controller@700000 {
-			compatible = "lantiq,sysgpe-falcon";
-			reg = <0x700000 0x100>;
-			#clock-cells = <1>;
-		};
-
-		mps@4000 {
-			compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100";
-			reg = <0x4000 0x1000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <154 155>;
-			lantiq,mbx = <&mpsmbx>;
-		};
-
-		gpio0: gpio@810000 {
-			compatible = "lantiq,falcon-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&icu0>;
-			interrupts = <44>;
-			reg = <0x810000 0x80>;
-			clocks = <&clock_syseth 16>;
-		};
-
-		gpio2: gpio@810100 {
-			compatible = "lantiq,falcon-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&icu0>;
-			interrupts = <46>;
-			reg = <0x810100 0x80>;
-			clocks = <&clock_syseth 17>;
-		};
-
-		clock_syseth: clock-controller@B00000 {
-			compatible = "lantiq,syseth-falcon";
-			reg = <0xB00000 0x100>;
-			#clock-cells = <1>;
-		};
-
-		pad@B01000 {
-			compatible = "lantiq,pad-falcon";
-			reg = <0xB01000 0x100>;
-			lantiq,bank = <0>;
-			clocks = <&clock_syseth 20>;
-		};
-
-		pad@B02000 {
-			compatible = "lantiq,pad-falcon";
-			reg = <0xB02000 0x100>;
-			lantiq,bank = <2>;
-			clocks = <&clock_syseth 21>;
-		};
-	};
-
-	fpi@1E000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,fpi", "simple-bus";
-		reg = <0x1E000000 0x1000000>;
-		ranges = <0x0 0x1E000000 0x1000000>;
-
-		serial1: serial@100B00 {
-			status = "disabled";
-			compatible = "lantiq,asc";
-			reg = <0x100B00 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <112 113 114>;
-			line = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&asc1_pins>;
-			clocks = <&clock_sys1 11>;
-		};
-
-		serial0: serial@100C00 {
-			compatible = "lantiq,asc";
-			reg = <0x100C00 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <104 105 106>;
-			line = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&asc0_pins>;
-			clocks = <&clock_sys1 12>;
-		};
-
-		spi: spi@100D00 {
-			status = "disabled";
-			compatible = "lantiq,falcon-spi", "lantiq,xrx100-spi", "lantiq,spi-lantiq-ssc";
-			interrupts = <22 23 24 25>;
-			interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x100D00 0x100>;
-			interrupt-parent = <&icu0>;
-			clocks = <&clock_sys1 13>;
-			base_cs = <1>;
-			num_cs = <2>;
-		};
-
-		gptc@100E00 {
-			compatible = "lantiq,gptc-falcon";
-			reg = <0x100E00 0x100>;
-		};
-
-		i2c: i2c@200000 {
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "lantiq,lantiq-i2c";
-			reg = <0x200000 0x10000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <18 19 20 21>;
-			gpios = <&gpio1 7 0 &gpio1 8 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c_pins>;
-			clocks = <&clock_sys1 14>;
-		};
-
-		gpio1: gpio@800100 {
-			compatible = "lantiq,falcon-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&icu0>;
-			interrupts = <45>;
-			reg = <0x800100 0x100>;
-			clocks = <&clock_sys1 16>;
-		};
-
-		gpio3: gpio@800200 {
-			compatible = "lantiq,falcon-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&icu0>;
-			interrupts = <47>;
-			reg = <0x800200 0x100>;
-			clocks = <&clock_sys1 17>;
-		};
-
-		gpio4: gpio@800300 {
-			compatible = "lantiq,falcon-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&icu0>;
-			interrupts = <48>;
-			reg = <0x800300 0x100>;
-			clocks = <&clock_sys1 18>;
-		};
-
-		pad@800400 {
-			compatible = "lantiq,pad-falcon";
-			reg = <0x800400 0x100>;
-			lantiq,bank = <1>;
-			clocks = <&clock_sys1 20>;
-		};
-
-		pad@800500 {
-			compatible = "lantiq,pad-falcon";
-			reg = <0x800500 0x100>;
-			lantiq,bank = <3>;
-			clocks = <&clock_sys1 21>;
-		};
-
-		pad@800600 {
-			compatible = "lantiq,pad-falcon";
-			reg = <0x800600 0x100>;
-			lantiq,bank = <4>;
-			clocks = <&clock_sys1 22>;
-		};
-
-		status@802000 {
-			compatible = "lantiq,status-falcon";
-			reg = <0x802000 0x80>;
-		};
-
-		clock_sys1: clock-controller@F00000 {
-			compatible = "lantiq,sys1-falcon";
-			reg = <0xF00000 0x100>;
-			#clock-cells = <1>;
-		};
-	};
-
-	sbs0@1F000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		reg = <0x1F000000 0x400000>;
-		ranges = <0x0 0x1F000000 0x400000>;
-
-		mpsmbx: mpsmbx@200000 {
-			reg = <0x200000 0x200>;
-		};
-	};
-
-	sbs1@1F700000 {
-
-	};
-
-	biu@1F800000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,biu", "simple-bus";
-		reg = <0x1F800000 0x800000>;
-		ranges = <0x0 0x1F800000 0x800000>;
-
-		icu0: icu@80200 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,icu";
-			reg = <0x80200 0x28
-				0x80228 0x28
-				0x80250 0x28
-				0x80278 0x28
-				0x802a0 0x28>;
-		};
-
-		watchdog@803F0 {
-			compatible = "lantiq,wdt";
-			reg = <0x803F0 0x10>;
-			clocks = <&io_clk>; /* currently no effect */
-		};
-	};
-
-	pinctrl {
-		compatible = "lantiq,pinctrl-falcon";
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinctrl0 {
-			/*ntr {
-				lantiq,groups = "ntr8k";
-				lantiq,function = "ntr";
-			};*/
-			hrst {
-				lantiq,groups = "hrst";
-				lantiq,function = "rst";
-			};
-		};
-
-		asc0_pins: asc0 {
-			asc0 {
-				lantiq,groups = "asc0";
-				lantiq,function = "asc";
-			};
-		};
-		asc1_pins: asc1 {
-			asc1 {
-				lantiq,groups = "asc1";
-				lantiq,function = "asc";
-			};
-		};
-		i2c_pins: i2c {
-			i2c {
-				lantiq,groups = "i2c";
-				lantiq,function = "i2c";
-			};
-		};
-		bootled_pins: bootled {
-			bootled {
-				lantiq,groups = "bootled";
-				lantiq,function = "led";
-			};
-		};
-		ntr_ntr8k: ntr8k {
-			ntr8k {
-				lantiq,groups = "ntr8k";
-				lantiq,function = "ntr";
-			};
-		};
-		ntr_pps: pps {
-			pps {
-				lantiq,groups = "pps";
-				lantiq,function = "ntr";
-			};
-		};
-		ntr_gpio: gpio {
-			gpio {
-				lantiq,pins = "io5";
-				lantiq,mux = <1>;
-				lantiq,output = <0>;
-			};
-		};
-		slic_pins: slic {
-			slic {
-				lantiq,groups = "slic";
-				lantiq,function = "slic";
-			};
-		};
-	};
-
-	pinselect-ntr {
-		compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr";
-		pinctrl-names = "ntr8k", "pps", "gpio";
-		pinctrl-0 = <&ntr_ntr8k>;
-		pinctrl-1 = <&ntr_pps>;
-		pinctrl-2 = <&ntr_gpio>;
-	};
-
-	pinselect-asc1 {
-		compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1";
-		pinctrl-names = "default", "asc1";
-		pinctrl-0 = <&slic_pins>;
-		pinctrl-1 = <&asc1_pins>;
-	};
-
-};
diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi
deleted file mode 100644
index 13bb002c52..0000000000
--- a/target/linux/lantiq/dts/vr9.dtsi
+++ /dev/null
@@ -1,260 +0,0 @@
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "lantiq,xway", "lantiq,vr9";
-
-	aliases {
-		serial0 = &asc1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips34Kc";
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-	};
-
-	cputemp@0 {
-		compatible = "lantiq,cputemp";
-	};
-
-	biu@1F800000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,biu", "simple-bus";
-		reg = <0x1F800000 0x800000>;
-		ranges = <0x0 0x1F800000 0x7FFFFF>;
-
-		icu0: icu@80200 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,icu";
-			reg = <0x80200 0x28
-				0x80228 0x28
-				0x80250 0x28
-				0x80278 0x28
-				0x802a0 0x28>;
-		};
-
-		watchdog@803F0 {
-			compatible = "lantiq,wdt";
-			reg = <0x803F0 0x10>;
-		};
-	};
-
-	sram@1F000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,sram", "simple-bus";
-		reg = <0x1F000000 0x800000>;
-		ranges = <0x0 0x1F000000 0x7FFFFF>;
-
-		eiu0: eiu@101000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,eiu-xway";
-			reg = <0x101000 0x1000>;
-			interrupt-parent = <&icu0>;
-			lantiq,eiu-irqs = <166 135 66 40 41 42>;
-		};
-
-		pmu0: pmu@102000 {
-			compatible = "lantiq,pmu-xway";
-			reg = <0x102000 0x1000>;
-		};
-
-		cgu0: cgu@103000 {
-			compatible = "lantiq,cgu-xway";
-			reg = <0x103000 0x1000>;
-		};
-
-		dcdc@106a00 {
-			compatible = "lantiq,dcdc-xrx200";
-			reg = <0x106a00 0x200>;
-		};
-
-		vmmc@107000 {
-			status = "disabled";
-			compatible = "lantiq,vmmc-xway";
-			reg = <0x103000 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <150 151 152 153 154 155>;
-		};
-
-		rcu0: rcu@203000 {
-			compatible = "lantiq,rcu-xrx200";
-			reg = <0x203000 0x1000>;
-			/* irq for thermal sensor */
-			interrupt-parent = <&icu0>;
-			interrupts = <115>;
-		};
-
-		xbar0: xbar@400000 {
-			compatible = "lantiq,xbar-xway";
-			reg = <0x400000 0x1000>;
-		};
-	};
-
-	fpi@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,fpi", "simple-bus";
-		ranges = <0x0 0x10000000 0xEEFFFFF>;
-		reg = <0x10000000 0xEF00000>;
-
-		localbus@0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-				1 0 0x4000000 0x4000010>; /* addsel1 */
-			compatible = "lantiq,localbus", "simple-bus";
-		};
-
-		gptu@E100A00 {
-			compatible = "lantiq,gptu-xway";
-			reg = <0xE100A00 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <126 127 128 129 130 131>;
-		};
-
-		asc0: serial@E100400 {
-			compatible = "lantiq,asc";
-			reg = <0xE100400 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <104 105 106>;
-			status = "disabled";
-		};
-
-		spi: spi@E100800 {
-			compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
-			reg = <0xE100800 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <22 23 24>;
-			interrupt-names = "spi_rx", "spi_tx", "spi_err",
-					"spi_frm";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		gpio: pinmux@E100B10 {
-			compatible = "lantiq,xrx200-pinctrl";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100B10 0xA0>;
-		};
-
-		asc1: serial@E100C00 {
-			compatible = "lantiq,asc";
-			reg = <0xE100C00 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <112 113 114>;
-		};
-
-		deu@E103100 {
-			compatible = "lantiq,deu-xrx200";
-			reg = <0xE103100 0xf00>;
-		};
-
-		dma0: dma@E104100 {
-			compatible = "lantiq,dma-xway";
-			reg = <0xE104100 0x800>;
-		};
-
-		ebu0: ebu@E105300 {
-			compatible = "lantiq,ebu-xway";
-			reg = <0xE105300 0x100>;
-		};
-
-		ifxhcd@E101000 {
-			status = "disabled";
-			compatible = "lantiq,xrx200-usb", "lantiq,ifxhcd-xrx200";
-			reg = <0xE101000 0x1000
-				0xE120000 0x3f000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <62 91>;
-			dr_mode = "host";
-		};
-
-		ifxhcd@E106000 {
-			status = "disabled";
-			compatible = "lantiq,xrx200-usb";
-			reg = <0xE106000 0x1000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <91>;
-			dr_mode = "host";
-		};
-
-		eth0: eth@E108000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "lantiq,xrx200-net";
-			reg = <	0xE108000 0x3000 /* switch */
-				0xE10B100 0x70 /* mdio */
-				0xE10B1D8 0x30 /* mii */
-				0xE10B308 0x30 /* pmac */
-			>;
-			interrupt-parent = <&icu0>;
-			interrupts = <75 73 72>;
-		};
-
-		mei@E116000 {
-			compatible = "lantiq,mei-xrx200";
-			reg = <0xE116000 0x9c>;
-			interrupt-parent = <&icu0>;
-			interrupts = <63>;
-		};
-
-		ppe@E234000 {
-			compatible = "lantiq,ppe-xrx200";
-			interrupt-parent = <&icu0>;
-			interrupts = <96>;
-		};
-
-		pcie0: pcie@d900000 {
-			compatible = "lantiq,pcie-xrx200";
-
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-
-			interrupt-parent = <&icu0>;
-			interrupts = <161 144>;
-
-			device_type = "pci";
-
-			gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
-		};
-
-		pci0: pci@E105400 {
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			compatible = "lantiq,pci-xway";
-			bus-range = <0x0 0x0>;
-			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
-				0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
-			reg = <0x7000000 0x8000         /* config space */
-				0xE105400 0x400>;       /* pci bridge */
-			lantiq,bus-clock = <33333333>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
-			req-mask = <0x1>; /* GNT1 */
-		};
-	};
-
-	vdsl {
-		compatible = "lantiq,vdsl-vrx200";
-	};
-};