lantiq: make dts files and kernel config kernel version specific

Move the devicetree source files to a kernel specific directory in
preparation of adding kernel 4.14 support.

Rename the subtarget kernel config files to match a specific kernel
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 306 deletions

diff --git a/target/linux/lantiq/dts/WBMR300.dts b/target/linux/lantiq/dts/WBMR300.dts
deleted file mode 100644
index 2ecfe4bc92..0000000000
--- a/target/linux/lantiq/dts/WBMR300.dts
+++ /dev/null
@@ -1,306 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9";
-	model = "Buffalo WBMR-300HPD";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_g;
-		led-failsafe = &diag_r;
-		led-running = &power_g;
-
-		led-dsl = &dsl;
-		led-internet = &router_g;
-		led-wifi = &wifi_g;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				phy-rst {
-					lantiq,pins = "io42";
-					lantiq,pull = <0>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				pcie-rst {
-					lantiq,pins = "io38";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-			pins_spi_default: pins_spi_default {
-				spi_in {
-					lantiq,groups = "spi_di";
-					lantiq,function = "spi";
-				};
-				spi_out {
-					lantiq,groups = "spi_do", "spi_clk",
-						"spi_cs4";
-					lantiq,function = "spi";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-			lantiq,portmask = <0x3>;
-		};
-
-		ifxhcd@E106000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware = "lantiq/xrx200_phy22f_a22.bin";
-		phys = [ 00 01 ];
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		power {
-			label = "power";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		auto {
-			label = "auto";
-			gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-		};
-
-		router {
-			label = "router";
-			gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <BTN_1>;
-			linux,input-type = <EV_SW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		diag_r: diag_r {
-			label = "wbmr300:red:diag";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-			default_state = "off";
-		};
-
-		wifi_g: wifi_g {
-			label = "wbmr300:green:wifi";
-			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		dsl: dsl {
-			label = "dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		router_y: router_y {
-			label = "wbmr300:yellow:router";
-			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		wifi_y: wifi_y {
-			label = "wbmr300:yellow:wifi";
-			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan1: lan1 {
-			label = "wbmr300:green:lan1";
-			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan: wan {
-			label = "wbmr300:green:wan";
-			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan3: lan3 {
-			label = "wbmr300:green:lan3";
-			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan2: lan2 {
-			label = "wbmr300:green:lan2";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		};
-
-		internet_g: internet_g {
-			label = "wbmr300:green:internet";
-			gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
-		};
-
-		internet_y: internet_y {
-			label = "wbmr300:yellow:internet";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-		};
-
-		router_g: router_g {
-			label = "wbmr300:green:router";
-			gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_g: power_g {
-			label = "wbmr300:green:power";
-			gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&spi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_spi_default>;
-
-	status = "ok";
-	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <4 0>;
-		spi-max-frequency = <20000000>;
-
-		partition@0 {
-			reg = <0x0 0x10000>;
-			label = "u-boot";
-			read-only;
-		};
-
-		partition@10000 {
-			reg = <0x10000 0x10000>;
-			label = "gphyfirmware";
-			read-only;
-		};
-
-		partition@20000 {
-			reg = <0x20000 0x80000>;
-			label = "dsl_fw";
-		};
-
-		partition@de0000 {
-			reg = <0xa0000 0xf40000>;
-			label = "firmware";
-		};
-
-		partition@fe0000 {
-			reg = <0xfe0000 0x10000>;
-			label = "sysconfig";
-			read-only;
-		};
-
-		partition@ff0000 {
-			reg = <0xff0000 0x2000>;
-			label = "ubootconfig";
-		};
-
-		partition@ff3000 {
-			reg = <0xff3000 0x2000>;
-			label = "board_config";
-			read-only;
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		lantiq,switch;
-
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "mii";
-			phy-handle = <&phy13>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <5>;
-			phy-mode = "mii";
-			phy-handle = <&phy14>;
-		};
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "mii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <3>;
-			phy-mode = "mii";
-			phy-handle = <&phy12>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy12: ethernet-phy@12 {
-			reg = <0x12>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-		phy14: ethernet-phy@14 {
-			reg = <0x14>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};