lantiq: make dts files and kernel config kernel version specific

Move the devicetree source files to a kernel specific directory in
preparation of adding kernel 4.14 support.

Rename the subtarget kernel config files to match a specific kernel
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 161 deletions

diff --git a/target/linux/lantiq/dts/FRITZ7320.dts b/target/linux/lantiq/dts/FRITZ7320.dts
deleted file mode 100644
index 34d0df9b3b..0000000000
--- a/target/linux/lantiq/dts/FRITZ7320.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
-	model = "1&1 HomeServer";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-
-		led-internet = &info_green;
-		led-dsl = &power;
-		led-wifi = &wlan;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x1000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					ath9k_cal: partition@0 {
-						label = "urlader";
-						reg = <0x00000 0x20000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0xf60000>;
-					};
-
-					partition@f80000 {
-						label = "tffs (1)";
-						reg = <0xf80000 0x40000>;
-						read-only;
-					};
-
-					partition@fc0000 {
-						label = "tffs (2)";
-						reg = <0xfc0000 0x40000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				pci {
-					lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
-					lantiq,function = "pci";
-				};
-				pci-in {
-					lantiq,groups = "req1", "req2", "req3", "req4";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-				pci-out {
-					lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
-					lantiq,output = <1>;
-					lantiq,pull = <0>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mtd-mac-address = <&ath9k_cal 0xa91>;
-			mtd-mac-address-increment = <(-2)>;
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		dect {
-			label = "dect";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power: power {
-			label = "fritz7320:green:power";
-			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		voice {
-			label = "fritz7320:green:fon";
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-		dect {
-			label = "fritz7320:green:dect";
-			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		};
-		wlan: wlan {
-			label = "fritz7320:green:wlan";
-			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-		};
-		info_green: info_green {
-			label = "fritz7320:green:info";
-			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
-		};
-		info_red {
-			label = "fritz7320:red:info";
-			gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	req-mask = <0xf>;
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@0,0 {
-		compatible = "pci0,0";
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-	};
-};