lantiq: make dts files and kernel config kernel version specific

Move the devicetree source files to a kernel specific directory in
preparation of adding kernel 4.14 support.

Rename the subtarget kernel config files to match a specific kernel
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 262 deletions

diff --git a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts b/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
deleted file mode 100644
index 961fd9b929..0000000000
--- a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
-	model = "BT Home Hub 2B";  /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_orange;
-		led-failsafe = &power_red;
-		led-running = &power_blue;
-
-		led-dsl = &broadband_blue;
-		led-wifi = &wireless_blue;
-	};
-
-	memory@0 {				  /* RAM: Samsung K4H511638F-LC 64MB */
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {				/* NOR Flash: Spansion S29AL004D 512KB */
-				compatible = "lantiq,nor";	/* "AMD AM29LV400BB" compatible on 3.3.8 */
-				lantiq,cs = <0>;
-				bank-width = <2>;
-				reg = <0 0x0 0x80000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x40000>; /* 256KB */
-					};
-
-					partition@40000 {
-						label = "uboot_env";
-						reg = <0x40000 0x10000>; /* 64KB */
-					};
-
-					partition@50000 {
-						label = "rg_conf_1";
-						reg = <0x50000 0x10000>;
-					};
-
-					partition@60000 {
-						label = "rg_conf_2";
-						reg = <0x60000 0x10000>;
-					};
-
-					partition@70000 {
-						label = "rg_conf_factory";
-						reg = <0x70000 0x10000>;
-					};
-				};
-			};
-
-			nand-parts@0 {		  /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
-				compatible = "lantiq,nand-xway";
-				lantiq,cs = <1>;
-				bank-width = <2>;
-				reg = <1 0x0 0x2000000 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					ath9k_cal: partition@0 {
-						label = "art";	   /* Atheros 9160 wifi b/g/n radio EEPROM */
-						reg = <0x00000 0x4000>;
-						read-only;
-					};
-
-					partition@4000 {
-						label = "kernel";
-						reg = <0x4000 0x200000>;
-					};
-
-					partition@164000 {
-						label = "ubi";
-						reg = <0x204000 0x1DFC000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				nand_out {
-					lantiq,groups = "nand cle", "nand ale";
-					lantiq,function = "ebu";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-				nand_cs1 {
-					lantiq,groups = "nand cs1";
-					lantiq,function = "ebu";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-				};
-				pci_in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-				};
-
-				btn_in {
-					lantiq,pins = "io2", "io15", "io22";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "rmii";
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-		};
-
-		gpios: stp@E100BB0 {
-			status = "okay";
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		findhandset {
-			label = "findhandset";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		upgrading-orange {
-			label = "bthomehubv2b:orange:upgrading";
-			gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		phone-orange {
-			label = "bthomehubv2b:orange:phone";
-			gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
-		};
-		phone-blue {
-			label = "bthomehubv2b:blue:phone";
-			gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		wireless-orange {
-			label = "bthomehubv2b:orange:wireless";
-			gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
-		};
-		wireless_blue: wireless-blue {
-			label = "bthomehubv2b:blue:wireless";
-			gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		broadband-red {
-			label = "bthomehubv2b:red:broadband";
-			gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
-		};
-		broadband-orange {
-			label = "bthomehubv2b:orange:broadband";
-			gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
-		};
-		broadband_blue: broadband-blue {
-			label = "bthomehubv2b:blue:broadband";
-			gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_red: power-red {
-			label = "bthomehubv2b:red:power";
-			gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
-		};
-		power_orange: power-orange {
-			label = "bthomehubv2b:orange:power";
-			gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		power_blue: power-blue {
-			label = "bthomehubv2b:blue:power";
-			gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@168c,0027 {
-		compatible = "pci168c,0027";
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-	};
-};