kirkwood: remove support for kernel 4.19

kirkwood has moved to DSA on 5.4, which will make kernel 4.14 and 4.19
support broken on the affected devices.
Support on kernel 5.4 seems to have been running fine for almost 2 months
on multiple devices, while support for 4.19 has never left testing state.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Pawel Dembicki <paweldembicki@gmail.com>

17 files changed, 0 insertions, 1759 deletions

diff --git a/target/linux/kirkwood/config-4.19 b/target/linux/kirkwood/config-4.19
deleted file mode 100644
index d7ea9e9eef..0000000000
--- a/target/linux/kirkwood/config-4.19
+++ /dev/null
@@ -1,344 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_CPU_AUTO=y
-# CONFIG_ARCH_MULTI_V4 is not set
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-CONFIG_ARCH_MULTI_V5=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_LIBATA_LEDS=y
-CONFIG_ARM=y
-# CONFIG_ARMADA_THERMAL is not set
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_LEDS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FEROCEON=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xf1012000
-CONFIG_DEBUG_UART_VIRT=0xfed12000
-CONFIG_DEBUG_UNCOMPRESS=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DLCI is not set
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXT4_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_PXA is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KIRKWOOD_CLK=y
-CONFIG_KIRKWOOD_THERMAL=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_NETXBIG=y
-CONFIG_LEDS_NS2=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_NAND_MARVELL is not set
-CONFIG_MTD_NAND_ORION=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MV643XX_ETH=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-# CONFIG_MVNETA is not set
-# CONFIG_MVPP2 is not set
-CONFIG_MVSW61XX_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_IRQCHIP=y
-CONFIG_ORION_TIMER=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MVEBU=y
-# CONFIG_PCI_V3_SEMI is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
-CONFIG_PHY_MVEBU_SATA=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_KIRKWOOD=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PLAT_ORION=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-# CONFIG_POWER_RESET_QNAP is not set
-CONFIG_POWER_SUPPLY=y
-CONFIG_RATIONAL=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_FSL=y
-# CONFIG_SERIAL_MVEBU_UART is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_ARMADA_3700 is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_ORION=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_LED_TRIG=y
-# CONFIG_USB_ROLE_SWITCH is not set
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-# CONFIG_VFP is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WAN=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-goflexhome.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-goflexhome.dts
deleted file mode 100644
index b0b69b46cd..0000000000
--- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-goflexhome.dts
+++ /dev/null
@@ -1,135 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Seagate GoFlex Home";
-	compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	aliases {
-		led-boot = &led_health;
-		led-failsafe = &led_fault;
-		led-running = &led_health;
-		led-upgrade = &led_fault;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_white: pmx-led-white {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_green: pmx-led_green {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_orange: pmx-led-orange {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led_health: health {
-			label = "status:green:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		led_fault: fault {
-			label = "status:orange:fault";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		misc {
-			label = "status:white:misc";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "disk-activity";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	chip-delay = <40>;
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x0100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "ubi";
-		reg = <0x0100000 0xff00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts
deleted file mode 100644
index eff9102d33..0000000000
--- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
- *
- * (c) 2013 Jonas Gorski <jogo@openwrt.org>
- * (c) 2013 Deutsche Telekom Innovation Laboratories
- * (c) 2014 Luka Perkov <luka@openwrt.org>
- * (c) 2014 Dan Walters <dan@walters.io>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Linksys Audi (EA3500)";
-	compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&pmx_btn_wps &pmx_btn_reset>;
-		pinctrl-names = "default";
-
-		wps {
-			label = "WPS Button";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		pinctrl-0 = <&pmx_led_green_power>;
-		pinctrl-names = "default";
-
-		led_power: power {
-			label = "audi:green:power";
-			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	mvsw61xx {
-		compatible = "marvell,88e6171";
-		status = "okay";
-		reg = <0x10>;
-
-		mii-bus = <&mdio>;
-		cpu-port-0 = <5>;
-		cpu-port-1 = <6>;
-		is-indirect;
-	};
-};
-
-&pinctrl {
-	pmx_led_green_power: pmx-led-green-power {
-		marvell,pins = "mpp7";
-		marvell,function = "gpo";
-	};
-
-	pmx_btn_wps: pmx-btn-wps {
-		marvell,pins = "mpp47";
-		marvell,function = "gpio";
-	};
-
-	pmx_btn_reset: pmx-btn-reset {
-		marvell,pins = "mpp48";
-		marvell,function = "gpio";
-	};
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "u_env";
-			reg = <0x80000 0x4000>;
-		};
-
-		partition@84000 {
-			label = "s_env";
-			reg = <0x84000 0x4000>;
-		};
-
-		partition@200000 {
-			label = "kernel1";
-			reg = <0x200000 0x290000>;
-		};
-
-		partition@490000 {
-			label = "rootfs1";
-			reg = <0x490000 0x1170000>;
-		};
-
-		partition@1600000 {
-			label = "kernel2";
-			reg = <0x1600000 0x290000>;
-		};
-
-		partition@1890000 {
-			label = "rootfs2";
-			reg = <0x1890000 0x1170000>;
-		};
-
-		partition@2a00000 {
-			label = "syscfg";
-			reg = <0x2a00000  0x1600000>;
-		};
-
-		partition@88000 {
-			label = "unused";
-			reg = <0x88000 0x178000>;
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&mdio {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
- * fixed speed and duplex.
- */
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-	};
-};
-
-/* eth1 is connected to the switch at port 6. However DSA only supports a
- * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
- */
-&eth1 {
-	status = "okay";
-
-	ethernet1-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-	};
-};
-
-/* There is no battery on the board, so the RTC does not keep
- * time when there is no power, making it useless.
- */
-&rtc {
-	status = "disabled";
-};
diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-nsa310b.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-nsa310b.dts
deleted file mode 100644
index 10b119eb01..0000000000
--- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-nsa310b.dts
+++ /dev/null
@@ -1,141 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/*
- * There are at least two different NSA310 designs. This variant has
- * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
- */
-
-/ {
-	model = "ZyXEL NSA310b";
-	compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	aliases {
-		led-boot = &led_green_sys;
-		led-failsafe = &led_red_sys;
-		led-running = &led_green_sys;
-		led-upgrade = &led_red_sys;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			pmx_led_esata_green: pmx-led-esata-green {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_esata_red: pmx-led-esata-red {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_green: pmx-led-usb-green {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_red: pmx-led-usb-red {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_green: pmx-led-sys-green {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_red: pmx-led-sys-red {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_green: pmx-led-hdd-green {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_red: pmx-led-hdd-red {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			lm85: lm85@2e {
-				compatible = "national,lm85";
-				reg = <0x2e>;
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led_green_sys: green-sys {
-			label = "nsa310:green:sys";
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led_red_sys: red-sys {
-			label = "nsa310:red:sys";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		green-hdd {
-			label = "nsa310:green:hdd";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-hdd {
-			label = "nsa310:red:hdd";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		green-esata {
-			label = "nsa310:green:esata";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-esata {
-			label = "nsa310:red:esata";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-
-		green-usb {
-			label = "nsa310:green:usb";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-usb {
-			label = "nsa310:red:usb";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-
-		green-copy {
-			label = "nsa310:green:copy";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-copy {
-			label = "nsa310:red:copy";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-on100.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-on100.dts
deleted file mode 100644
index 5ae66ede2f..0000000000
--- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-on100.dts
+++ /dev/null
@@ -1,165 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Cisco Systems ON100";
-	compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	aliases {
-		led-boot = &led_health_green;
-		led-failsafe = &led_health_red;
-		led-running = &led_health_green;
-		led-upgrade = &led_health_red;
-		serial0 = &uart0;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&pmx_btn_reset>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		pinctrl-0 = <&pmx_led_health_red &pmx_led_health_green>;
-		pinctrl-names = "default";
-
-		led_health_green: health-green {
-			label = "on100:green:health";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		led_health_red: health-red {
-			label = "on100:red:health";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-
-		health2-green {
-			label = "on100:green:health2";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-
-		health2-red {
-			label = "on100:red:health2";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-		phy-connection-type = "rgmii-id";
-	};
-};
-
-&eth1 {
-	status = "okay";
-
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		/* Marvell 88E1121R */
-		compatible = "ethernet-phy-id0141.0cb0",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		/* Marvell 88E1121R */
-		compatible = "ethernet-phy-id0141.0cb0",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x00000000 0x000a0000>;
-		read-only;
-	};
-
-	partition@a0000 {
-		label = "u-boot environment";
-		reg = <0x000a0000 0x00020000>;
-		read-only;
-	};
-
-	partition@c0000 {
-		label = "kernel";
-		reg = <0x000c0000 0x00540000>;
-	};
-
-	partition@600000 {
-		label = "ubi";
-		reg = <0x00600000 0x1fa00000>;
-	};
-};
-
-&pinctrl {
-	pmx_led_health_red: pmx-led-health-red {
-		marvell,pins = "mpp45";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_health_green: pmx-led-health-green {
-		marvell,pins = "mpp44";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_health2_red: pmx-led-health2-red {
-		marvell,pins = "mpp47";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_health2_green: pmx-led-health2-green {
-		marvell,pins = "mpp46";
-		marvell,function = "gpio";
-	};
-
-	pmx_btn_reset: pmx-btn-reset {
-		marvell,pins = "mpp31";
-		marvell,function = "gpio";
-	};
-};
-
-&sdio {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
deleted file mode 100644
index 0637c24b63..0000000000
--- a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
-+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
-@@ -6,7 +6,14 @@
- 
- / {
- 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
--	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+	compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+	aliases {
-+		led-boot = &led_green_os;
-+		led-failsafe = &led_red_os;
-+		led-running = &led_green_os;
-+		led-upgrade = &led_red_os;
-+	};
- 
- 	memory {
- 		device_type = "memory";
-@@ -81,12 +88,12 @@
- 			     &pmx_led_usb_transfer>;
- 		pinctrl-names = "default";
- 
--		green-os {
-+		led_green_os: green-os {
- 			label = "ib62x0:green:os";
- 			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
--		red-os {
-+		led_red_os: red-os {
- 			label = "ib62x0:red:os";
- 			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
- 		};
-@@ -118,13 +125,13 @@
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x600000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@700000 {
--		label = "root";
--		reg = <0x0700000 0xf900000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0xfe00000>;
- 	};
- 
- };
diff --git a/target/linux/kirkwood/patches-4.19/101-iconnect.patch b/target/linux/kirkwood/patches-4.19/101-iconnect.patch
deleted file mode 100644
index 935e2dfcf5..0000000000
--- a/target/linux/kirkwood/patches-4.19/101-iconnect.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -8,6 +8,13 @@
- 	model = "Iomega Iconnect";
- 	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_power_blue;
-+		led-failsafe = &led_power_red;
-+		led-running = &led_power_blue;
-+		led-upgrade = &led_power_red;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x10000000>;
-@@ -16,8 +23,6 @@
- 	chosen {
- 		bootargs = "console=ttyS0,115200n8 earlyprintk";
- 		stdout-path = &uart0;
--		linux,initrd-start = <0x4500040>;
--		linux,initrd-end   = <0x4800000>;
- 	};
- 
- 	ocp@f1000000 {
-@@ -89,12 +94,12 @@
- 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- 			default-state = "on";
- 		};
--		power-blue {
-+		led_power_blue: power-blue {
- 			label = "power:blue";
- 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
--		power-red {
-+		led_power_red: power-red {
- 			label = "power:red";
- 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
- 		};
-@@ -146,28 +151,23 @@
- 	status = "okay";
- 
- 	partition@0 {
--		label = "uboot";
--		reg = <0x0000000 0xc0000>;
-+		label = "u-boot";
-+		reg = <0x0000000 0xe0000>;
- 	};
- 
--	partition@a0000 {
--		label = "env";
--		reg = <0xa0000 0x20000>;
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
- 	};
- 
- 	partition@100000 {
--		label = "zImage";
--		reg = <0x100000 0x300000>;
--	};
--
--	partition@540000 {
--		label = "initrd";
--		reg = <0x540000 0x300000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@980000 {
--		label = "boot";
--		reg = <0x980000 0x1f400000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0x1fe00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-4.19/102-dockstar.patch b/target/linux/kirkwood/patches-4.19/102-dockstar.patch
deleted file mode 100644
index 127f84962c..0000000000
--- a/target/linux/kirkwood/patches-4.19/102-dockstar.patch
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
-@@ -8,6 +8,13 @@
- 	model = "Seagate FreeAgent Dockstar";
- 	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_health;
-+		led-failsafe = &led_fault;
-+		led-running = &led_health;
-+		led-upgrade = &led_fault;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x8000000>;
-@@ -42,12 +49,12 @@
- 		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
- 		pinctrl-names = "default";
- 
--		health {
-+		led_health: health {
- 			label = "status:green:health";
- 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
--		fault {
-+		led_fault: fault {
- 			label = "status:orange:fault";
- 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- 		};
-@@ -78,18 +85,22 @@
- 
- 	partition@0 {
- 		label = "u-boot";
--		reg = <0x0000000 0x100000>;
--		read-only;
-+		reg = <0x0000000 0xe0000>;
-+	};
-+
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@500000 {
--		label = "data";
--		reg = <0x0500000 0xfb00000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0xfe00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
deleted file mode 100644
index 9313b4bc3e..0000000000
--- a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -8,6 +8,13 @@
- 	model = "Iomega StorCenter ix2-200";
- 	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_health;
-+		led-running = &led_power;
-+		led-upgrade = &led_health;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x10000000>;
-@@ -127,16 +134,16 @@
- 			      &pmx_led_rebuild &pmx_led_health >;
- 		pinctrl-names = "default";
- 
--		power_led {
-+		led_power: power_led {
- 			label = "status:white:power_led";
- 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
- 		rebuild_led {
- 			label = "status:white:rebuild_led";
- 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- 		};
--		health_led {
-+		led_health: health_led {
- 			label = "status:red:health_led";
- 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- 		};
-@@ -186,18 +193,18 @@
- 	};
- 
- 	partition@a0000 {
--		label = "env";
-+		label = "u-boot environment";
- 		reg = <0xa0000 0x20000>;
- 		read-only;
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
-+		label = "kernel";
- 		reg = <0x100000 0x300000>;
- 	};
- 
- 	partition@400000 {
--		label = "rootfs";
-+		label = "ubi";
- 		reg = <0x400000 0x1C00000>;
- 	};
- };
-@@ -211,7 +218,7 @@
- };
- 
- &eth0 {
--	status = "okay";
-+	status = "disabled";
- 	ethernet0-port@0 {
- 		speed = <1000>;
- 		duplex = <1>;
diff --git a/target/linux/kirkwood/patches-4.19/105-ea4500.patch b/target/linux/kirkwood/patches-4.19/105-ea4500.patch
deleted file mode 100644
index 4c3c82bdfd..0000000000
--- a/target/linux/kirkwood/patches-4.19/105-ea4500.patch
+++ /dev/null
@@ -1,144 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -24,6 +24,10 @@
- 	};
- 
- 	aliases {
-+		led-boot = &led_white_health;
-+		led-failsafe = &led_white_health;
-+		led-running = &led_white_health;
-+		led-upgrade = &led_white_health;
- 		serial0 = &uart0;
- 	};
- 
-@@ -56,9 +60,10 @@
- 		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
- 		pinctrl-names = "default";
- 
--		white-health {
-+		led_white_health: white-health {
- 			label = "viper:white:health";
- 			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+			default-state = "on";
- 		};
- 
- 		white-pulse {
-@@ -67,9 +72,18 @@
- 		};
- 	};
- 
--	dsa {
--		status = "disabled";
-+	mvsw61xx {
-+		compatible = "marvell,88e6171";
-+		status = "okay";
-+		reg = <0x10>;
-+
-+		mii-bus = <&mdio>;
-+		cpu-port-0 = <5>;
-+		cpu-port-1 = <6>;
-+		is-indirect;
-+	};
- 
-+	dsa {
- 		compatible = "marvell,dsa";
- 		#address-cells = <2>;
- 		#size-cells = <0>;
-@@ -161,22 +175,22 @@
- 		};
- 
- 		partition@200000 {
--			label = "kernel";
-+			label = "kernel1";
- 			reg = <0x200000 0x2A0000>;
- 		};
- 
- 		partition@4a0000 {
--			label = "rootfs";
-+			label = "rootfs1";
- 			reg = <0x4A0000 0x1760000>;
- 		};
- 
- 		partition@1c00000 {
--			label = "alt_kernel";
-+			label = "kernel2";
- 			reg = <0x1C00000 0x2A0000>;
- 		};
- 
- 		partition@1ea0000 {
--			label = "alt_rootfs";
-+			label = "rootfs2";
- 			reg = <0x1EA0000 0x1760000>;
- 		};
- 
-@@ -207,53 +221,6 @@
- 
- &mdio {
- 	status = "okay";
--
--	switch@10 {
--		compatible = "marvell,mv88e6085";
--		#address-cells = <1>;
--		#size-cells = <0>;
--		reg = <16>;
--
--		ports {
--			#address-cells = <1>;
--			#size-cells = <0>;
--
--			port@0 {
--				reg = <0>;
--				label = "ethernet1";
--			};
--
--			port@1 {
--				reg = <1>;
--				label = "ethernet2";
--			};
--
--			port@2 {
--				reg = <2>;
--				label = "ethernet3";
--			};
--
--			port@3 {
--				reg = <3>;
--				label = "ethernet4";
--			};
--
--			port@4 {
--				reg = <4>;
--				label = "internet";
--			};
--
--			port@5 {
--				reg = <5>;
--				label = "cpu";
--				ethernet = <&eth0port>;
--				fixed-link {
--					speed = <1000>;
--					full-duplex;
--				};
--			};
--		};
--	};
- };
- 
- &uart0 {
-@@ -272,10 +239,14 @@
- };
- 
- /* eth1 is connected to the switch at port 6. However DSA only supports a
-- * single CPU port. So leave this port disabled to avoid confusion.
-+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
-  */
- &eth1 {
--	status = "disabled";
-+	status = "okay";
-+	ethernet1-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
- };
- 
- /* There is no battery on the board, so the RTC does not keep
diff --git a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
deleted file mode 100644
index 82cf90841e..0000000000
--- a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
-+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
-@@ -8,6 +8,13 @@
- 	model = "Seagate GoFlex Net";
- 	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_health;
-+		led-failsafe = &led_fault;
-+		led-running = &led_health;
-+		led-upgrade = &led_fault;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x8000000>;
-@@ -85,12 +92,12 @@
- 			    >;
- 		pinctrl-names = "default";
- 
--		health {
-+		led_health: health {
- 			label = "status:green:health";
- 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
--		fault {
-+		led_fault: fault {
- 			label = "status:orange:fault";
- 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- 		};
-@@ -159,18 +166,8 @@
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
--	};
--
--	partition@500000 {
--		label = "pogoplug";
--		reg = <0x0500000 0x2000000>;
--	};
--
--	partition@2500000 {
--		label = "root";
--		reg = <0x02500000 0xd800000>;
-+		label = "ubi";
-+		reg = <0x0100000 0x0ff00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch
deleted file mode 100644
index df654033fd..0000000000
--- a/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
-@@ -112,40 +112,16 @@
- 
- 	partition@0 {
- 		label = "uboot";
--		reg = <0x0000000 0x0100000>;
-+		reg = <0x0000000 0x00c0000>;
- 		read-only;
- 	};
- 	partition@100000 {
- 		label = "uboot_env";
--		reg = <0x0100000 0x0080000>;
-+		reg = <0x00c0000 0x0080000>;
- 	};
--	partition@180000 {
--		label = "key_store";
--		reg = <0x0180000 0x0080000>;
--	};
--	partition@200000 {
--		label = "info";
--		reg = <0x0200000 0x0080000>;
--	};
--	partition@280000 {
--		label = "etc";
--		reg = <0x0280000 0x0a00000>;
--	};
--	partition@c80000 {
--		label = "kernel_1";
--		reg = <0x0c80000 0x0a00000>;
--	};
--	partition@1680000 {
--		label = "rootfs1";
--		reg = <0x1680000 0x2fc0000>;
--	};
--	partition@4640000 {
--		label = "kernel_2";
--		reg = <0x4640000 0x0a00000>;
--	};
--	partition@5040000 {
--		label = "rootfs2";
--		reg = <0x5040000 0x2fc0000>;
-+	partition@140000 {
-+		label = "ubi";
-+		reg = <0x0140000 0x7ec0000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch b/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch
deleted file mode 100644
index 36c77cd44a..0000000000
--- a/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-nsa325.dts
-+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
-@@ -15,6 +15,13 @@
- 	model = "ZyXEL NSA325";
- 	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_green_sys;
-+		led-failsafe = &led_orange_sys;
-+		led-running = &led_green_sys;
-+		led-upgrade = &led_orange_sys;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x20000000>;
-@@ -162,11 +169,12 @@
- 			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
- 		pinctrl-names = "default";
- 
--		green-sys {
-+		led_green_sys: green-sys {
- 			label = "nsa325:green:sys";
- 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+			default-state = "on";
- 		};
--		orange-sys {
-+		led_orange_sys: orange-sys {
- 			label = "nsa325:orange:sys";
- 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- 		};
diff --git a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
deleted file mode 100644
index 4273eb9af1..0000000000
--- a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
+++ /dev/null
@@ -1,87 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
-+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
-@@ -18,12 +18,20 @@
- 	compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
- 		     "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_health;
-+		led-failsafe = &led_fault;
-+		led-running = &led_health;
-+		led-upgrade = &led_fault;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
- 	chosen {
-+		bootargs = "console=ttyS0,115200";
- 		stdout-path = "uart0:115200n8";
- 	};
- 
-@@ -37,8 +45,8 @@
- 		eject {
- 			debounce-interval = <50>;
- 			wakeup-source;
--			linux,code = <KEY_EJECTCD>;
--			label = "Eject Button";
-+			linux,code = <KEY_RESTART>;
-+			label = "Reset";
- 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- 		};
- 	};
-@@ -48,12 +56,12 @@
- 		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
- 		pinctrl-names = "default";
- 
--		health {
-+		led_health: health {
- 			label = "pogoplugv4:green:health";
- 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
- 			default-state = "on";
- 		};
--		fault {
-+		led_fault: fault {
- 			label = "pogoplugv4:red:fault";
- 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- 		};
-@@ -137,29 +145,19 @@
- 		#size-cells = <1>;
- 
- 		partition@0 {
--			label = "u-boot";
--			reg = <0x00000000 0x200000>;
-+			label = "uboot";
-+			reg = <0x00000000 0x1c0000>;
- 			read-only;
- 		};
- 
--		partition@200000 {
--			label = "uImage";
--			reg = <0x00200000 0x300000>;
--		};
--
--		partition@500000 {
--			label = "uImage2";
--			reg = <0x00500000 0x300000>;
--		};
--
--		partition@800000 {
--			label = "failsafe";
--			reg = <0x00800000 0x800000>;
-+		partition@1c0000 {
-+			label = "uboot_env";
-+			reg = <0x001c0000 0x40000>;
- 		};
- 
--		partition@1000000 {
--			label = "root";
--			reg = <0x01000000 0x7000000>;
-+		partition@200000 {
-+			label = "ubi";
-+			reg = <0x00200000 0x7e00000>;
- 		};
- 	};
- };
diff --git a/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch b/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch
deleted file mode 100644
index 4b64337c9c..0000000000
--- a/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-@@ -20,6 +20,13 @@
- 	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
- 		     "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_health;
-+		led-failsafe = &led_fault;
-+		led-running = &led_health;
-+		led-upgrade = &led_fault;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x10000000>;
-@@ -33,12 +40,12 @@
- 	gpio-leds {
- 		compatible = "gpio-leds";
- 
--		health {
-+		led_health: health {
- 			label = "pogo_e02:green:health";
- 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
--		fault {
-+		led_fault: fault {
- 			label = "pogo_e02:orange:fault";
- 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- 		};
-@@ -95,25 +102,26 @@
- 	status = "okay";
- 
- 	partition@0 {
--		label = "u-boot";
--		reg = <0x0000000 0x100000>;
-+		label = "uboot";
-+		reg = <0x0 0xe0000>;
- 		read-only;
- 	};
- 
--	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
-+	partition@e0000 {
-+		label = "uboot_env";
-+		reg = <0xe0000 0x20000>;
- 	};
- 
--	partition@500000 {
--		label = "pogoplug";
--		reg = <0x0500000 0x2000000>;
-+	partition@100000 {
-+		label = "second_stage_uboot";
-+		reg = <0x100000 0x100000>;
- 	};
- 
--	partition@2500000 {
--		label = "root";
--		reg = <0x02500000 0x5b00000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0x7e00000>;
- 	};
-+
- };
- 
- &mdio {
diff --git a/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch
deleted file mode 100644
index 71d9bba3f1..0000000000
--- a/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -118,6 +118,7 @@ config MACH_DOVE
- config MACH_KIRKWOOD
- 	bool "Marvell Kirkwood boards"
- 	depends on ARCH_MULTI_V5
-+	select ARCH_WANT_LIBATA_LEDS
- 	select CPU_FEROCEON
- 	select GPIOLIB
- 	select KIRKWOOD_CLK
diff --git a/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch
deleted file mode 100644
index 860d7b0728..0000000000
--- a/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d
- 	return of_get_property(pp, "compatible", NULL);
- }
- 
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- 				  const struct mtd_partition **pparts,
- 				  struct mtd_part_parser_data *data)
-@@ -32,6 +34,7 @@ static int parse_fixed_partitions(struct
- 	struct mtd_partition *parts;
- 	struct device_node *mtd_node;
- 	struct device_node *ofpart_node;
-+	const char *owrtpart = "ubi";
- 	const char *partname;
- 	struct device_node *pp;
- 	int nr_parts, i, ret = 0;
-@@ -110,9 +113,15 @@ static int parse_fixed_partitions(struct
- 		parts[i].size = of_read_number(reg + a_cells, s_cells);
- 		parts[i].of_node = pp;
- 
--		partname = of_get_property(pp, "label", &len);
--		if (!partname)
--			partname = of_get_property(pp, "name", &len);
-+		if (mangled_rootblock && (i == mangled_rootblock)) {
-+			partname = owrtpart;
-+		} else {
-+			partname = of_get_property(pp, "label", &len);
-+
-+			if (!partname)
-+				partname = of_get_property(pp, "name", &len);
-+		}
-+
- 		parts[i].name = partname;
- 
- 		if (of_get_property(pp, "read-only", &len))
-@@ -219,6 +228,18 @@ static int __init ofpart_parser_init(voi
- 	return 0;
- }
- 
-+static int __init active_root(char *str)
-+{
-+	get_option(&str, &mangled_rootblock);
-+
-+	if (!mangled_rootblock)
-+		return 1;
-+
-+	return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- 	deregister_mtd_parser(&ofpart_parser);