diff options
| author | Sven Roederer <devel-sven@geroedel.de> | 2017-05-29 11:24:49 +0200 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2017-06-07 06:33:33 +0200 |
| commit | 9715beb04c74a918697945b3e2d23a139bd04b70 (patch) | |
| tree | 03d755a0a8a4d10521b43970ebf265eb08451c1b /target/linux/kirkwood | |
| parent | e178d51a044c0eac1a56fa404c7da7361e336068 (diff) | |
| download | upstream-9715beb04c74a918697945b3e2d23a139bd04b70.tar.gz upstream-9715beb04c74a918697945b3e2d23a139bd04b70.tar.bz2 upstream-9715beb04c74a918697945b3e2d23a139bd04b70.zip | |
ramips: add support for Ubiquiti EdgeRouter X-SFP
This patch adds support for the Ubiquiti EdgeRouter X-SFP and
improves support for the EdgeRouter X (PoE-passthrough).
Specification:
- SoC: MediaTek MT7621AT
- Flash: 256 MiB
- RAM: 265 MiB
- Ethernet: 5 x LAN (1000 Mbps)
- UART: 1 x UART on PCB (3.3V, RX, TX, GND) - 57600 8N1
- EdgeRouter X:
- 1 x PoE-Passtrough (Eth4)
- powered by Wallwart or passive PoE
- EdgeRouter X-SFP:
- 5 x PoE-Out (24V, passive)
- 1 x SFP (unknown status)
- powered by Wallwart (24V)
Doesn't work:
* SoC has crypto engine but no open driver.
* SoC has nat acceleration, but no open driver.
* This router has 2MB spi flash soldered in but MT
nand/spi drivers do not support pin sharing,
so it is not accessable and disabled. Stock
firmware could read it and it was empty.
Installation
via vendor firmware:
- build an Initrd-image (> 3MiB) and upload the factory-image
- initrd can have luci-mod-failsafe
- flash final firmware via LuCI / sysupgrade on rebooted system
via TFTP:
- stop uboot into tftp-load into option "1"
- upload factory.bin image
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
Diffstat (limited to 'target/linux/kirkwood')
0 files changed, 0 insertions, 0 deletions