kirkwood: add kernel 4.19 support

Add patches for 4.19
Drop patch 200-disable-tso, as the packet corruption was fixed in
kernel commit 3b89624ab54b9dc2d92fc08ce2670e5f19ad8ec8

Restructure the DTS for Marvell switch in 104-ea3500 and 105-ea4500
to fix DTC warning.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>

14 files changed, 1180 insertions, 0 deletions

diff --git a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
new file mode 100644
index 0000000000..d1a5aa7d3e
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
@@ -0,0 +1,30 @@
+--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
++++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
+@@ -6,7 +6,7 @@
+ 
+ / {
+ 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
+-	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++	compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ 
+ 	memory {
+ 		device_type = "memory";
+@@ -118,13 +118,13 @@
+ 	};
+ 
+ 	partition@100000 {
+-		label = "uImage";
+-		reg = <0x0100000 0x600000>;
++		label = "second stage u-boot";
++		reg = <0x100000 0x200000>;
+ 	};
+ 
+-	partition@700000 {
+-		label = "root";
+-		reg = <0x0700000 0xf900000>;
++	partition@200000 {
++		label = "ubi";
++		reg = <0x200000 0xfe00000>;
+ 	};
+ 
+ };
diff --git a/target/linux/kirkwood/patches-4.19/101-iconnect.patch b/target/linux/kirkwood/patches-4.19/101-iconnect.patch
new file mode 100644
index 0000000000..ab47b5a724
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/101-iconnect.patch
@@ -0,0 +1,50 @@
+--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
++++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
+@@ -16,8 +16,6 @@
+ 	chosen {
+ 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+ 		stdout-path = &uart0;
+-		linux,initrd-start = <0x4500040>;
+-		linux,initrd-end   = <0x4800000>;
+ 	};
+ 
+ 	ocp@f1000000 {
+@@ -146,28 +144,23 @@
+ 	status = "okay";
+ 
+ 	partition@0 {
+-		label = "uboot";
+-		reg = <0x0000000 0xc0000>;
++		label = "u-boot";
++		reg = <0x0000000 0xe0000>;
+ 	};
+ 
+-	partition@a0000 {
+-		label = "env";
+-		reg = <0xa0000 0x20000>;
++	partition@e0000 {
++		label = "u-boot environment";
++		reg = <0xe0000 0x100000>;
+ 	};
+ 
+ 	partition@100000 {
+-		label = "zImage";
+-		reg = <0x100000 0x300000>;
++		label = "second stage u-boot";
++		reg = <0x100000 0x200000>;
+ 	};
+ 
+-	partition@540000 {
+-		label = "initrd";
+-		reg = <0x540000 0x300000>;
+-	};
+-
+-	partition@980000 {
+-		label = "boot";
+-		reg = <0x980000 0x1f400000>;
++	partition@200000 {
++		label = "ubi";
++		reg = <0x200000 0x1fe00000>;
+ 	};
+ };
+ 
diff --git a/target/linux/kirkwood/patches-4.19/102-dockstar.patch b/target/linux/kirkwood/patches-4.19/102-dockstar.patch
new file mode 100644
index 0000000000..7462b93e0c
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/102-dockstar.patch
@@ -0,0 +1,32 @@
+--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
++++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
+@@ -78,18 +78,22 @@
+ 
+ 	partition@0 {
+ 		label = "u-boot";
+-		reg = <0x0000000 0x100000>;
+-		read-only;
++		reg = <0x0000000 0xe0000>;
++	};
++
++	partition@e0000 {
++		label = "u-boot environment";
++		reg = <0xe0000 0x100000>;
+ 	};
+ 
+ 	partition@100000 {
+-		label = "uImage";
+-		reg = <0x0100000 0x400000>;
++		label = "second stage u-boot";
++		reg = <0x100000 0x200000>;
+ 	};
+ 
+-	partition@500000 {
+-		label = "data";
+-		reg = <0x0500000 0xfb00000>;
++	partition@200000 {
++		label = "ubi";
++		reg = <0x200000 0xfe00000>;
+ 	};
+ };
+ 
diff --git a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
new file mode 100644
index 0000000000..9036ead951
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
@@ -0,0 +1,33 @@
+--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
++++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+@@ -186,18 +186,18 @@
+ 	};
+ 
+ 	partition@a0000 {
+-		label = "env";
++		label = "u-boot environment";
+ 		reg = <0xa0000 0x20000>;
+ 		read-only;
+ 	};
+ 
+ 	partition@100000 {
+-		label = "uImage";
++		label = "kernel";
+ 		reg = <0x100000 0x300000>;
+ 	};
+ 
+ 	partition@400000 {
+-		label = "rootfs";
++		label = "ubi";
+ 		reg = <0x400000 0x1C00000>;
+ 	};
+ };
+@@ -211,7 +211,7 @@
+ };
+ 
+ &eth0 {
+-	status = "okay";
++	status = "disabled";
+ 	ethernet0-port@0 {
+ 		speed = <1000>;
+ 		duplex = <1>;
diff --git a/target/linux/kirkwood/patches-4.19/104-ea3500.patch b/target/linux/kirkwood/patches-4.19/104-ea3500.patch
new file mode 100644
index 0000000000..45dc670ebc
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/104-ea3500.patch
@@ -0,0 +1,259 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -269,6 +269,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-linkstation-lswsxl.dtb \
+ 	kirkwood-linkstation-lswvl.dtb \
+ 	kirkwood-linkstation-lswxl.dtb \
++	kirkwood-linksys-audi.dtb \
+ 	kirkwood-linksys-viper.dtb \
+ 	kirkwood-lschlv2.dtb \
+ 	kirkwood-lsxhl.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
+@@ -0,0 +1,246 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
++ *
++ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
++ * (c) 2013 Deutsche Telekom Innovation Laboratories
++ * (c) 2014 Luka Perkov <luka@openwrt.org>
++ * (c) 2014 Dan Walters <dan@walters.io>
++ *
++ */
++
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6282.dtsi"
++
++/ {
++	model = "Linksys Audi (EA3500)";
++	compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++
++	memory@0 {
++		device_type = "memory";
++		reg = <0x00000000 0x4000000>;
++	};
++
++	aliases {
++		serial0 = &uart0;
++	};
++
++	chosen {
++		stdout-path = "serial0:115200n8";
++	};
++
++	gpio_keys {
++		compatible = "gpio-keys";
++		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
++		pinctrl-names = "default";
++
++		wps {
++			label = "WPS Button";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++		};
++
++		reset {
++			label = "Reset Button";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++		pinctrl-0 = < &pmx_led_green_power >;
++		pinctrl-names = "default";
++
++		green-power {
++			label = "audi:green:power";
++			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++		};
++	};
++
++	switches {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		mvsw61xx@10 {
++			compatible = "marvell,88e6171";
++			status = "okay";
++			reg = <0x10>;
++
++			mii-bus = <&mdio>;
++			cpu-port-0 = <5>;
++			cpu-port-1 = <6>;
++			is-indirect;
++		};
++	};
++
++	dsa {
++		compatible = "marvell,dsa";
++		#address-cells = <2>;
++		#size-cells = <0>;
++
++		dsa,ethernet = <&eth0port>;
++		dsa,mii-bus = <&mdio>;
++
++		switch@16,0 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <16 0>;	/* MDIO address 16, switch 0 in tree */
++
++			port@0 {
++				reg = <0>;
++				label = "ethernet1";
++			};
++
++			port@1 {
++				reg = <1>;
++				label = "ethernet2";
++			};
++
++			port@2 {
++				reg = <2>;
++				label = "ethernet3";
++			};
++
++			port@3 {
++				reg = <3>;
++				label = "ethernet4";
++			};
++
++			port@4 {
++				reg = <4>;
++				label = "internet";
++			};
++
++			port@5 {
++				reg = <5>;
++				label = "cpu";
++			};
++		};
++	};
++};
++
++&pinctrl {
++	pmx_led_green_power: pmx-led-green-power {
++		marvell,pins = "mpp7";
++		marvell,function = "gpo";
++	};
++	pmx_btn_wps: pmx-btn-wps {
++		marvell,pins = "mpp47";
++		marvell,function = "gpio";
++	};
++	pmx_btn_reset: pmx-btn-reset {
++		marvell,pins = "mpp48";
++		marvell,function = "gpio";
++	};
++};
++
++&nand {
++	status = "okay";
++	pinctrl-0 = <&pmx_nand>;
++	pinctrl-names = "default";
++
++	partitions {
++		compatible = "fixed-partitions";
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		partition@0 {
++			label = "u-boot";
++			reg = <0x0 0x80000>;
++			read-only;
++		};
++
++		partition@80000 {
++			label = "u_env";
++			reg = <0x80000 0x4000>;
++		};
++
++		partition@84000 {
++			label = "s_env";
++			reg = <0x84000 0x4000>;
++		};
++
++		partition@200000 {
++			label = "kernel1";
++			reg = <0x200000 0x290000>;
++		};
++
++		partition@490000 {
++			label = "rootfs1";
++			reg = <0x490000 0x1170000>;
++		};
++
++		partition@1600000 {
++			label = "kernel2";
++			reg = <0x1600000 0x290000>;
++		};
++
++		partition@1890000 {
++			label = "rootfs2";
++			reg = <0x1890000 0x1170000>;
++		};
++
++		partition@2a00000 {
++			label = "syscfg";
++			reg = <0x2a00000  0x1600000>;
++		};
++
++		partition@88000 {
++			label = "unused";
++			reg = <0x88000 0x178000>;
++		};
++
++	};
++};
++
++&pciec {
++	status = "okay";
++};
++
++&pcie0 {
++	status = "okay";
++};
++
++&pcie1 {
++	status = "okay";
++};
++
++&mdio {
++	status = "okay";
++};
++
++&uart0 {
++	status = "okay";
++};
++
++/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
++ * fixed speed and duplex.
++ */
++&eth0 {
++	status = "okay";
++	ethernet0-port@0 {
++		speed = <1000>;
++		duplex = <1>;
++	};
++};
++
++/* eth1 is connected to the switch at port 6. However DSA only supports a
++ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
++ */
++&eth1 {
++	status = "okay";
++	ethernet1-port@0 {
++		speed = <1000>;
++		duplex = <1>;
++	};
++};
++
++/* There is no battery on the board, so the RTC does not keep
++ * time when there is no power, making it useless.
++ */
++&rtc {
++	status = "disabled";
++};
diff --git a/target/linux/kirkwood/patches-4.19/105-ea4500.patch b/target/linux/kirkwood/patches-4.19/105-ea4500.patch
new file mode 100644
index 0000000000..71e00879d5
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/105-ea4500.patch
@@ -0,0 +1,126 @@
+--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
++++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+@@ -67,9 +67,23 @@
+ 		};
+ 	};
+ 
+-	dsa {
+-		status = "disabled";
++	switches {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		mvsw61xx@10 {
++			compatible = "marvell,88e6171";
++			status = "okay";
++			reg = <0x10>;
++
++			mii-bus = <&mdio>;
++			cpu-port-0 = <5>;
++			cpu-port-1 = <6>;
++			is-indirect;
++		};
++	};
+ 
++	dsa {
+ 		compatible = "marvell,dsa";
+ 		#address-cells = <2>;
+ 		#size-cells = <0>;
+@@ -161,22 +175,22 @@
+ 		};
+ 
+ 		partition@200000 {
+-			label = "kernel";
++			label = "kernel1";
+ 			reg = <0x200000 0x2A0000>;
+ 		};
+ 
+ 		partition@4a0000 {
+-			label = "rootfs";
++			label = "rootfs1";
+ 			reg = <0x4A0000 0x1760000>;
+ 		};
+ 
+ 		partition@1c00000 {
+-			label = "alt_kernel";
++			label = "kernel2";
+ 			reg = <0x1C00000 0x2A0000>;
+ 		};
+ 
+ 		partition@1ea0000 {
+-			label = "alt_rootfs";
++			label = "rootfs2";
+ 			reg = <0x1EA0000 0x1760000>;
+ 		};
+ 
+@@ -207,53 +221,6 @@
+ 
+ &mdio {
+ 	status = "okay";
+-
+-	switch@10 {
+-		compatible = "marvell,mv88e6085";
+-		#address-cells = <1>;
+-		#size-cells = <0>;
+-		reg = <16>;
+-
+-		ports {
+-			#address-cells = <1>;
+-			#size-cells = <0>;
+-
+-			port@0 {
+-				reg = <0>;
+-				label = "ethernet1";
+-			};
+-
+-			port@1 {
+-				reg = <1>;
+-				label = "ethernet2";
+-			};
+-
+-			port@2 {
+-				reg = <2>;
+-				label = "ethernet3";
+-			};
+-
+-			port@3 {
+-				reg = <3>;
+-				label = "ethernet4";
+-			};
+-
+-			port@4 {
+-				reg = <4>;
+-				label = "internet";
+-			};
+-
+-			port@5 {
+-				reg = <5>;
+-				label = "cpu";
+-				ethernet = <&eth0port>;
+-				fixed-link {
+-					speed = <1000>;
+-					full-duplex;
+-				};
+-			};
+-		};
+-	};
+ };
+ 
+ &uart0 {
+@@ -272,10 +239,14 @@
+ };
+ 
+ /* eth1 is connected to the switch at port 6. However DSA only supports a
+- * single CPU port. So leave this port disabled to avoid confusion.
++ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
+  */
+ &eth1 {
+-	status = "disabled";
++	status = "okay";
++	ethernet1-port@0 {
++		speed = <1000>;
++		duplex = <1>;
++	};
+ };
+ 
+ /* There is no battery on the board, so the RTC does not keep
diff --git a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch b/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
new file mode 100644
index 0000000000..9ac30b6d30
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
@@ -0,0 +1,130 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -256,6 +256,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-ds411.dtb \
+ 	kirkwood-ds411j.dtb \
+ 	kirkwood-ds411slim.dtb \
++	kirkwood-goflexhome.dtb \
+ 	kirkwood-goflexnet.dtb \
+ 	kirkwood-guruplug-server-plus.dtb \
+ 	kirkwood-ib62x0.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
+@@ -0,0 +1,117 @@
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++
++/ {
++	model = "Seagate GoFlex Home";
++	compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++	memory@0 {
++		device_type = "memory";
++		reg = <0x00000000 0x8000000>;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
++		stdout-path = &uart0;
++	};
++
++	ocp@f1000000 {
++		pinctrl: pin-controller@10000 {
++			pmx_usb_power_enable: pmx-usb-power-enable {
++				marvell,pins = "mpp29";
++				marvell,function = "gpio";
++			};
++			pmx_led_white: pmx-led-white {
++				marvell,pins = "mpp40";
++				marvell,function = "gpio";
++			};
++			pmx_led_green: pmx-led_green {
++				marvell,pins = "mpp46";
++				marvell,function = "gpio";
++			};
++			pmx_led_orange: pmx-led-orange {
++				marvell,pins = "mpp47";
++				marvell,function = "gpio";
++			};
++		};
++		serial@12000 {
++			status = "ok";
++		};
++
++		sata@80000 {
++			status = "okay";
++			nr-ports = <2>;
++		};
++
++	};
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		health {
++			label = "status:green:health";
++			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-on";
++		};
++		fault {
++			label = "status:orange:fault";
++			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++		};
++		misc {
++			label = "status:white:misc";
++			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "disk-activity";
++		};
++	};
++	regulators {
++		compatible = "simple-bus";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		pinctrl-0 = <&pmx_usb_power_enable>;
++		pinctrl-names = "default";
++
++		usb_power: regulator@1 {
++			compatible = "regulator-fixed";
++			reg = <1>;
++			regulator-name = "USB Power";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++			enable-active-high;
++			regulator-always-on;
++			regulator-boot-on;
++			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
++		};
++	};
++};
++
++&nand {
++	chip-delay = <40>;
++	status = "okay";
++
++	partition@0 {
++		label = "u-boot";
++		reg = <0x0000000 0x100000>;
++		read-only;
++	};
++
++	partition@100000 {
++		label = "ubi";
++		reg = <0x100000 0x0ff00000>;
++	};
++};
++
++&mdio {
++	status = "okay";
++
++	ethphy0: ethernet-phy@0 {
++		reg = <0>;
++	};
++};
++
++&eth0 {
++	status = "okay";
++	ethernet0-port@0 {
++		phy-handle = <&ethphy0>;
++	};
++};
diff --git a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
new file mode 100644
index 0000000000..b22176880b
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
@@ -0,0 +1,23 @@
+--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
++++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
+@@ -159,18 +159,8 @@
+ 	};
+ 
+ 	partition@100000 {
+-		label = "uImage";
+-		reg = <0x0100000 0x400000>;
+-	};
+-
+-	partition@500000 {
+-		label = "pogoplug";
+-		reg = <0x0500000 0x2000000>;
+-	};
+-
+-	partition@2500000 {
+-		label = "root";
+-		reg = <0x02500000 0xd800000>;
++		label = "ubi";
++		reg = <0x0100000 0x0ff00000>;
+ 	};
+ };
+ 
diff --git a/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch
new file mode 100644
index 0000000000..df654033fd
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch
@@ -0,0 +1,48 @@
+--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
++++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+@@ -112,40 +112,16 @@
+ 
+ 	partition@0 {
+ 		label = "uboot";
+-		reg = <0x0000000 0x0100000>;
++		reg = <0x0000000 0x00c0000>;
+ 		read-only;
+ 	};
+ 	partition@100000 {
+ 		label = "uboot_env";
+-		reg = <0x0100000 0x0080000>;
++		reg = <0x00c0000 0x0080000>;
+ 	};
+-	partition@180000 {
+-		label = "key_store";
+-		reg = <0x0180000 0x0080000>;
+-	};
+-	partition@200000 {
+-		label = "info";
+-		reg = <0x0200000 0x0080000>;
+-	};
+-	partition@280000 {
+-		label = "etc";
+-		reg = <0x0280000 0x0a00000>;
+-	};
+-	partition@c80000 {
+-		label = "kernel_1";
+-		reg = <0x0c80000 0x0a00000>;
+-	};
+-	partition@1680000 {
+-		label = "rootfs1";
+-		reg = <0x1680000 0x2fc0000>;
+-	};
+-	partition@4640000 {
+-		label = "kernel_2";
+-		reg = <0x4640000 0x0a00000>;
+-	};
+-	partition@5040000 {
+-		label = "rootfs2";
+-		reg = <0x5040000 0x2fc0000>;
++	partition@140000 {
++		label = "ubi";
++		reg = <0x0140000 0x7ec0000>;
+ 	};
+ };
+ 
diff --git a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
new file mode 100644
index 0000000000..f8b963e03f
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
@@ -0,0 +1,147 @@
+kirkwood: add nsa310b dtb, a zyxel nsa310 variant
+
+add support to a nsa310 variant with red/green usb led
+and lm85 temp/fan controller
+
+Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
+
+NOTE: this patch can be upstreamed as-is, LEDE-specific
+		nand partitions are set in another patch
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -287,6 +287,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-ns2mini.dtb \
+ 	kirkwood-nsa310.dtb \
+ 	kirkwood-nsa310a.dtb \
++	kirkwood-nsa310b.dtb \
+ 	kirkwood-nsa320.dtb \
+ 	kirkwood-nsa325.dtb \
+ 	kirkwood-openblocks_a6.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
+@@ -0,0 +1,124 @@
++/dts-v1/;
++
++#include "kirkwood-nsa3x0-common.dtsi"
++
++/*
++ * There are at least two different NSA310 designs. This variant has
++ * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
++ */
++
++/ {
++	model = "ZyXEL NSA310b";
++	compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++	memory@0 {
++		device_type = "memory";
++		reg = <0x00000000 0x10000000>;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,115200";
++		stdout-path = &uart0;
++	};
++
++	ocp@f1000000 {
++		pinctrl: pin-controller@10000 {
++			pinctrl-names = "default";
++
++			pmx_led_esata_green: pmx-led-esata-green {
++				marvell,pins = "mpp12";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_esata_red: pmx-led-esata-red {
++				marvell,pins = "mpp13";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_usb_green: pmx-led-usb-green {
++				marvell,pins = "mpp15";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_usb_red: pmx-led-usb-red {
++				marvell,pins = "mpp16";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_sys_green: pmx-led-sys-green {
++				marvell,pins = "mpp28";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_sys_red: pmx-led-sys-red {
++				marvell,pins = "mpp29";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_hdd_green: pmx-led-hdd-green {
++				marvell,pins = "mpp41";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_hdd_red: pmx-led-hdd-red {
++				marvell,pins = "mpp42";
++				marvell,function = "gpio";
++			};
++
++		};
++
++		i2c@11000 {
++			status = "okay";
++
++			lm85: lm85@2e {
++				compatible = "national,lm85";
++				reg = <0x2e>;
++			};
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		green-sys {
++			label = "nsa310:green:sys";
++			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++		};
++		red-sys {
++			label = "nsa310:red:sys";
++			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
++		};
++		green-hdd {
++			label = "nsa310:green:hdd";
++			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
++		};
++		red-hdd {
++			label = "nsa310:red:hdd";
++			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
++		};
++		green-esata {
++			label = "nsa310:green:esata";
++			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
++		};
++		red-esata {
++			label = "nsa310:red:esata";
++			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
++		};
++		green-usb {
++			label = "nsa310:green:usb";
++			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
++		};
++		red-usb {
++			label = "nsa310:red:usb";
++			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
++		};
++		green-copy {
++			label = "nsa310:green:copy";
++			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
++		};
++		red-copy {
++			label = "nsa310:red:copy";
++			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
++		};
++	};
++};
diff --git a/target/linux/kirkwood/patches-4.19/108-on100.patch b/target/linux/kirkwood/patches-4.19/108-on100.patch
new file mode 100644
index 0000000000..2f535955dd
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/108-on100.patch
@@ -0,0 +1,171 @@
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-on100.dts
+@@ -0,0 +1,158 @@
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6282.dtsi"
++
++/ {
++	model = "Cisco Systems ON100";
++	compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++
++	memory@0 {
++		device_type = "memory";
++		reg = <0x00000000 0x20000000>;
++	};
++
++	aliases {
++		serial0 = &uart0;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,115200n8 earlyprintk";
++		stdout-path = "serial0:115200n8";
++	};
++
++	gpio_keys {
++		compatible = "gpio-keys";
++		pinctrl-0 = <&pmx_btn_reset>;
++		pinctrl-names = "default";
++
++		reset {
++			label = "Reset Button";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
++		pinctrl-names = "default";
++
++		health-g {
++			label = "on100:green:health";
++			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
++		};
++
++		health-r {
++			label = "on100:red:health";
++			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
++		};
++
++		health2-g {
++			label = "on100:green:health2";
++			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
++		};
++
++		health2-r {
++			label = "on100:red:health2";
++			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&eth0 {
++	status = "okay";
++
++	ethernet0-port@0 {
++		phy-handle = <&ethphy0>;
++		phy-connection-type = "rgmii-id";
++	};
++};
++
++&eth1 {
++	status = "okay";
++
++	ethernet1-port@0 {
++		phy-handle = <&ethphy1>;
++		phy-connection-type = "rgmii-id";
++	};
++};
++
++&mdio {
++	status = "okay";
++
++	ethphy0: ethernet-phy@0 {
++		/* Marvell 88E1121R */
++		compatible = "ethernet-phy-id0141.0cb0",
++			     "ethernet-phy-ieee802.3-c22";
++		reg = <0>;
++	};
++
++	ethphy1: ethernet-phy@1 {
++		/* Marvell 88E1121R */
++		compatible = "ethernet-phy-id0141.0cb0",
++			     "ethernet-phy-ieee802.3-c22";
++		reg = <1>;
++	};
++};
++
++&nand {
++	status = "okay";
++
++	partition@0 {
++		label = "u-boot";
++		reg = <0x00000000 0x000a0000>;
++		read-only;
++	};
++
++	partition@a0000 {
++		label = "u-boot environment";
++		reg = <0x000a0000 0x00020000>;
++		read-only;
++	};
++
++	partition@c0000 {
++		label = "kernel";
++		reg = <0x000c0000 0x00540000>;
++	};
++
++	partition@600000 {
++		label = "ubi";
++		reg = <0x00600000 0x1fa00000>;
++	};
++};
++
++&pinctrl {
++	pmx_led_health_r: pmx-led-health-r {
++		marvell,pins = "mpp45";
++		marvell,function = "gpio";
++	};
++
++	pmx_led_health_g: pmx-led-health-g {
++		marvell,pins = "mpp44";
++		marvell,function = "gpio";
++	};
++
++	pmx_led_health2_r: pmx-led-health2-r {
++		marvell,pins = "mpp47";
++		marvell,function = "gpio";
++	};
++
++	pmx_led_health2_g: pmx-led-health2-g {
++		marvell,pins = "mpp46";
++		marvell,function = "gpio";
++	};
++
++	pmx_btn_reset: pmx-led-reset {
++		marvell,pins = "mpp31";
++		marvell,function = "gpio";
++	};
++};
++
++&sdio {
++	status = "okay";
++};
++
++&uart0 {
++	status = "okay";
++};
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -290,6 +290,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-nsa310b.dtb \
+ 	kirkwood-nsa320.dtb \
+ 	kirkwood-nsa325.dtb \
++	kirkwood-on100.dtb \
+ 	kirkwood-openblocks_a6.dtb \
+ 	kirkwood-openblocks_a7.dtb \
+ 	kirkwood-openrd-base.dtb \
diff --git a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
new file mode 100644
index 0000000000..b54768290e
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
@@ -0,0 +1,59 @@
+--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
++++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+@@ -24,6 +24,7 @@
+ 	};
+ 
+ 	chosen {
++		bootargs = "console=ttyS0,115200";
+ 		stdout-path = "uart0:115200n8";
+ 	};
+ 
+@@ -37,8 +38,8 @@
+ 		eject {
+ 			debounce-interval = <50>;
+ 			wakeup-source;
+-			linux,code = <KEY_EJECTCD>;
+-			label = "Eject Button";
++			linux,code = <KEY_RESTART>;
++			label = "Reset";
+ 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ 		};
+ 	};
+@@ -137,29 +138,19 @@
+ 		#size-cells = <1>;
+ 
+ 		partition@0 {
+-			label = "u-boot";
+-			reg = <0x00000000 0x200000>;
++			label = "uboot";
++			reg = <0x00000000 0x1c0000>;
+ 			read-only;
+ 		};
+ 
+-		partition@200000 {
+-			label = "uImage";
+-			reg = <0x00200000 0x300000>;
+-		};
+-
+-		partition@500000 {
+-			label = "uImage2";
+-			reg = <0x00500000 0x300000>;
++		partition@1c0000 {
++			label = "uboot_env";
++			reg = <0x001c0000 0x40000>;
+ 		};
+ 
+-		partition@800000 {
+-			label = "failsafe";
+-			reg = <0x00800000 0x800000>;
+-		};
+-
+-		partition@1000000 {
+-			label = "root";
+-			reg = <0x01000000 0x7000000>;
++		partition@200000 {
++			label = "ubi";
++			reg = <0x00200000 0x7e00000>;
+ 		};
+ 	};
+ };
diff --git a/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch
new file mode 100644
index 0000000000..71d9bba3f1
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/mach-mvebu/Kconfig
++++ b/arch/arm/mach-mvebu/Kconfig
+@@ -118,6 +118,7 @@ config MACH_DOVE
+ config MACH_KIRKWOOD
+ 	bool "Marvell Kirkwood boards"
+ 	depends on ARCH_MULTI_V5
++	select ARCH_WANT_LIBATA_LEDS
+ 	select CPU_FEROCEON
+ 	select GPIOLIB
+ 	select KIRKWOOD_CLK
diff --git a/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch
new file mode 100644
index 0000000000..860d7b0728
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch
@@ -0,0 +1,62 @@
+The WRT1900AC among other Linksys routers uses a dual-firmware layout.
+Dynamically rename the active partition to "ubi".
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+--- a/drivers/mtd/ofpart.c
++++ b/drivers/mtd/ofpart.c
+@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d
+ 	return of_get_property(pp, "compatible", NULL);
+ }
+ 
++static int mangled_rootblock;
++
+ static int parse_fixed_partitions(struct mtd_info *master,
+ 				  const struct mtd_partition **pparts,
+ 				  struct mtd_part_parser_data *data)
+@@ -32,6 +34,7 @@ static int parse_fixed_partitions(struct
+ 	struct mtd_partition *parts;
+ 	struct device_node *mtd_node;
+ 	struct device_node *ofpart_node;
++	const char *owrtpart = "ubi";
+ 	const char *partname;
+ 	struct device_node *pp;
+ 	int nr_parts, i, ret = 0;
+@@ -110,9 +113,15 @@ static int parse_fixed_partitions(struct
+ 		parts[i].size = of_read_number(reg + a_cells, s_cells);
+ 		parts[i].of_node = pp;
+ 
+-		partname = of_get_property(pp, "label", &len);
+-		if (!partname)
+-			partname = of_get_property(pp, "name", &len);
++		if (mangled_rootblock && (i == mangled_rootblock)) {
++			partname = owrtpart;
++		} else {
++			partname = of_get_property(pp, "label", &len);
++
++			if (!partname)
++				partname = of_get_property(pp, "name", &len);
++		}
++
+ 		parts[i].name = partname;
+ 
+ 		if (of_get_property(pp, "read-only", &len))
+@@ -219,6 +228,18 @@ static int __init ofpart_parser_init(voi
+ 	return 0;
+ }
+ 
++static int __init active_root(char *str)
++{
++	get_option(&str, &mangled_rootblock);
++
++	if (!mangled_rootblock)
++		return 1;
++
++	return 1;
++}
++
++__setup("mangled_rootblock=", active_root);
++
+ static void __exit ofpart_parser_exit(void)
+ {
+ 	deregister_mtd_parser(&ofpart_parser);