diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2022-01-01 21:00:36 +0900 |
|---|---|---|
| committer | Sungbo Eo <mans0n@gorani.run> | 2022-01-29 23:50:28 +0900 |
| commit | 957f9adeb1f8ec5de8d73e183dec267dbc6dc8bb (patch) | |
| tree | 44238e23a15f6b0f89f303b1d7b00def6b8f5261 /target/linux/kirkwood/config-5.10 | |
| parent | 0c568d044fac166e803ab6a9bcd2f18d31309f9f (diff) | |
| download | upstream-957f9adeb1f8ec5de8d73e183dec267dbc6dc8bb.tar.gz upstream-957f9adeb1f8ec5de8d73e183dec267dbc6dc8bb.tar.bz2 upstream-957f9adeb1f8ec5de8d73e183dec267dbc6dc8bb.zip | |
kirkwood: add support for ipTIME NAS1
ipTIME NAS1 is a 1-bay NAS, based on Marvell Kirkwood SoC.
Specifications:
* SoC: 88F6281
* RAM: 256 MiB
* Flash: SPI NOR 16 MiB
* SATA: 1x 3Gb/s
* Ethernet: 1x 1GbE
* USB: 1x 2.0
* Fan: 2 speed level
* UART: JP1 (115200 8N1)
* Pinout: [3V3] (TXD) (RXD) (GND)
Notes:
* There are several variants of the model name: "NAS-I", "NASI", "NAS1".
Here "NAS1" is adopted for consistent naming scheme.
* The reset button is also a USB copy button in stock FW,
but in this patch the former is the only default behavior.
Installation via web interface:
1. Flash sysupgrade image through the stock web interface.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/kirkwood/config-5.10')
| -rw-r--r-- | target/linux/kirkwood/config-5.10 | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/target/linux/kirkwood/config-5.10 b/target/linux/kirkwood/config-5.10 index f80a7d8f20..ae9c3b0999 100644 --- a/target/linux/kirkwood/config-5.10 +++ b/target/linux/kirkwood/config-5.10 @@ -122,6 +122,7 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y +CONFIG_HWMON=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_OMAP=y CONFIG_HZ_FIXED=0 @@ -163,6 +164,9 @@ CONFIG_MTD_NAND_ECC_SW_HAMMING=y # CONFIG_MTD_NAND_MARVELL is not set CONFIG_MTD_NAND_ORION=y CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_BLOCK=y @@ -248,6 +252,7 @@ CONFIG_SPARSE_IRQ=y CONFIG_SPI=y # CONFIG_SPI_ARMADA_3700 is not set CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y CONFIG_SPI_ORION=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_SRAM=y @@ -259,6 +264,7 @@ CONFIG_THERMAL=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_OF=y CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TIMER_OF=y |