diff options
| author | Matthew Hagan <mnhagan88@gmail.com> | 2022-01-29 09:03:11 +0900 |
|---|---|---|
| committer | Robert Marko <robimarko@gmail.com> | 2023-01-16 12:42:23 +0100 |
| commit | 6e03304c76aee6fc5c3139f4af8c24665ec7f89b (patch) | |
| tree | 71430e0abc38cc2d13b65808f591c68abe25ea9a /target/linux/ipq807x/base-files | |
| parent | 2ddb2057cdf4a08fd2abb8c09d02e28a2d14f406 (diff) | |
| download | upstream-6e03304c76aee6fc5c3139f4af8c24665ec7f89b.tar.gz upstream-6e03304c76aee6fc5c3139f4af8c24665ec7f89b.tar.bz2 upstream-6e03304c76aee6fc5c3139f4af8c24665ec7f89b.zip | |
ipq807x: add Edgecore EAP102
The Edgecore EAP102 is a wall/ceiling mountable AP. The AP can be
powered by either PoE or AC adapter.
Device info:
- IPQ8071-A SoC
- 1GiB RAM
- 256MiB NAND flash
- 32MiB SPI NOR
- 2 Ethernet ports
- 1 Console port
- 2GHz/5GHz AX WLAN
- 2 USB 2.0 ports
Install instructions:
Prerequistes - TFTP server, preferrably within 192.168.1.0/24
Console cable plugged in (115200 8N1 no flow control)
1. Power on device and interrupt u-boot to obtain u-boot CLI
2. set serverip to IP address of the TFTP server:
`setenv serverip 192.168.1.250`
3. Download image from TFTP server:
`tftpboot 0x44000000 openwrt-ipq807x-generic-edgecore_eap102-squashfs-nand-factory.ubi`
4. Flash ubi image to both partitions and reset:
`sf probe
imxtract 0x44000000 ubi
nand device 0
nand erase 0x0 0x3400000
nand erase 0x3c00000 0x3400000
nand write $fileaddr 0x0 $filesize
nand write $fileaddr 0x3c00000 $filesize
reset`
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Diffstat (limited to 'target/linux/ipq807x/base-files')
5 files changed, 32 insertions, 0 deletions
diff --git a/target/linux/ipq807x/base-files/etc/board.d/01_leds b/target/linux/ipq807x/base-files/etc/board.d/01_leds index f0a2bdd7bb..0424958416 100644 --- a/target/linux/ipq807x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq807x/base-files/etc/board.d/01_leds @@ -6,6 +6,9 @@ board_config_update board=$(board_name) case "$board" in +edgecore,eap102) + ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan" + ;; redmi,ax6|\ xiaomi,ax3600) ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan" diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network index 273547dc22..8856daff31 100644 --- a/target/linux/ipq807x/base-files/etc/board.d/02_network +++ b/target/linux/ipq807x/base-files/etc/board.d/02_network @@ -11,6 +11,9 @@ ipq807x_setup_interfaces() local board="$1" case "$board" in + edgecore,eap102) + ucidef_set_interfaces_lan_wan "lan" "wan" + ;; edimax,cax1800) ucidef_set_interfaces_lan_wan "lan" ;; diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata index 7ac05f2992..a2290ac124 100644 --- a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata +++ b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata @@ -9,6 +9,7 @@ board=$(board_name) case "$FIRMWARE" in "ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin") case "$board" in + edgecore,eap102|\ edimax,cax1800|\ qnap,301w|\ redmi,ax6|\ diff --git a/target/linux/ipq807x/base-files/etc/init.d/bootcount b/target/linux/ipq807x/base-files/etc/init.d/bootcount new file mode 100755 index 0000000000..6917446a9b --- /dev/null +++ b/target/linux/ipq807x/base-files/etc/init.d/bootcount @@ -0,0 +1,13 @@ +#!/bin/sh /etc/rc.common + +START=99 + +boot() { + case $(board_name) in + edgecore,eap102) + fw_setenv upgrade_available 0 + # Unset changed flag after sysupgrade complete + fw_setenv changed + ;; + esac +} diff --git a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh index fe20412083..ab3121c44f 100644 --- a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh @@ -43,6 +43,18 @@ platform_pre_upgrade() { platform_do_upgrade() { case "$(board_name)" in + edgecore,eap102) + active="$(fw_printenv -n active)" + if [ "$active" -eq "1" ]; then + CI_UBIPART="rootfs2" + else + CI_UBIPART="rootfs1" + fi + # force altbootcmd which handles partition change in u-boot + fw_setenv bootcount 3 + fw_setenv upgrade_available 1 + nand_do_upgrade "$1" + ;; edimax,cax1800) nand_do_upgrade "$1" ;; |