ipq806x: fix 3.18 support

accidentially removed the files in the v4.4 commit

Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 511 insertions, 0 deletions

diff --git a/target/linux/ipq806x/patches-3.18/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch b/target/linux/ipq806x/patches-3.18/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch
new file mode 100644
index 0000000000..25803b88eb
--- /dev/null
+++ b/target/linux/ipq806x/patches-3.18/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch
@@ -0,0 +1,511 @@
+--- a/drivers/phy/Kconfig
++++ b/drivers/phy/Kconfig
+@@ -256,4 +256,15 @@ config PHY_STIH41X_USB
+ 	  Enable this to support the USB transceiver that is part of
+ 	  STMicroelectronics STiH41x SoC series.
+ 
++config PHY_QCOM_DWC3
++	tristate "QCOM DWC3 USB PHY support"
++	depends on ARCH_QCOM
++	depends on HAS_IOMEM
++	depends on OF
++	select GENERIC_PHY
++	help
++	  This option enables support for the Synopsis PHYs present inside the
++	  Qualcomm USB3.0 DWC3 controller.  This driver supports both HS and SS
++	  PHY controllers.
++
+ endmenu
+--- a/drivers/phy/Makefile
++++ b/drivers/phy/Makefile
+@@ -31,3 +31,4 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+=
+ obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
+ obj-$(CONFIG_PHY_STIH407_USB)		+= phy-stih407-usb.o
+ obj-$(CONFIG_PHY_STIH41X_USB)		+= phy-stih41x-usb.o
++obj-$(CONFIG_PHY_QCOM_DWC3)		+= phy-qcom-dwc3.o
+--- /dev/null
++++ b/drivers/phy/phy-qcom-dwc3.c
+@@ -0,0 +1,483 @@
++/* Copyright (c) 2013-2014, Code Aurora Forum. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/phy/phy.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++
++/**
++ *  USB QSCRATCH Hardware registers
++ */
++#define QSCRATCH_GENERAL_CFG		(0x08)
++#define HSUSB_PHY_CTRL_REG		(0x10)
++
++/* PHY_CTRL_REG */
++#define HSUSB_CTRL_DMSEHV_CLAMP			BIT(24)
++#define HSUSB_CTRL_USB2_SUSPEND			BIT(23)
++#define HSUSB_CTRL_UTMI_CLK_EN			BIT(21)
++#define	HSUSB_CTRL_UTMI_OTG_VBUS_VALID		BIT(20)
++#define HSUSB_CTRL_USE_CLKCORE			BIT(18)
++#define HSUSB_CTRL_DPSEHV_CLAMP			BIT(17)
++#define HSUSB_CTRL_COMMONONN			BIT(11)
++#define HSUSB_CTRL_ID_HV_CLAMP			BIT(9)
++#define HSUSB_CTRL_OTGSESSVLD_CLAMP		BIT(8)
++#define HSUSB_CTRL_CLAMP_EN			BIT(7)
++#define HSUSB_CTRL_RETENABLEN			BIT(1)
++#define HSUSB_CTRL_POR				BIT(0)
++
++/* QSCRATCH_GENERAL_CFG */
++#define HSUSB_GCFG_XHCI_REV		BIT(2)
++
++/**
++ *  USB QSCRATCH Hardware registers
++ */
++#define SSUSB_PHY_CTRL_REG		(0x00)
++#define SSUSB_PHY_PARAM_CTRL_1		(0x04)
++#define SSUSB_PHY_PARAM_CTRL_2		(0x08)
++#define CR_PROTOCOL_DATA_IN_REG		(0x0c)
++#define CR_PROTOCOL_DATA_OUT_REG	(0x10)
++#define CR_PROTOCOL_CAP_ADDR_REG	(0x14)
++#define CR_PROTOCOL_CAP_DATA_REG	(0x18)
++#define CR_PROTOCOL_READ_REG		(0x1c)
++#define CR_PROTOCOL_WRITE_REG		(0x20)
++
++/* PHY_CTRL_REG */
++#define SSUSB_CTRL_REF_USE_PAD		BIT(28)
++#define SSUSB_CTRL_TEST_POWERDOWN	BIT(27)
++#define SSUSB_CTRL_LANE0_PWR_PRESENT	BIT(24)
++#define SSUSB_CTRL_SS_PHY_EN		BIT(8)
++#define SSUSB_CTRL_SS_PHY_RESET		BIT(7)
++
++/* SSPHY control registers */
++#define SSPHY_CTRL_RX_OVRD_IN_HI(lane)	(0x1006 + 0x100 * lane)
++#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane)	(0x1002 + 0x100 * lane)
++
++/* RX OVRD IN HI bits */
++#define RX_OVRD_IN_HI_RX_RESET_OVRD		BIT(13)
++#define RX_OVRD_IN_HI_RX_RX_RESET		BIT(12)
++#define RX_OVRD_IN_HI_RX_EQ_OVRD		BIT(11)
++#define RX_OVRD_IN_HI_RX_EQ_MASK		0x0700
++#define RX_OVRD_IN_HI_RX_EQ_SHIFT		8
++#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD		BIT(7)
++#define RX_OVRD_IN_HI_RX_EQ_EN			BIT(6)
++#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD	BIT(5)
++#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK	0x0018
++#define RX_OVRD_IN_HI_RX_RATE_OVRD		BIT(2)
++#define RX_OVRD_IN_HI_RX_RATE_MASK		0x0003
++
++/* TX OVRD DRV LO register bits */
++#define TX_OVRD_DRV_LO_AMPLITUDE_MASK	0x007F
++#define TX_OVRD_DRV_LO_PREEMPH_MASK	0x3F80
++#define TX_OVRD_DRV_LO_PREEMPH_SHIFT	7
++#define TX_OVRD_DRV_LO_EN		BIT(14)
++
++struct qcom_dwc3_usb_phy {
++	void __iomem		*base;
++	struct device		*dev;
++	struct phy *phy;
++
++	int (*phy_init)(struct qcom_dwc3_usb_phy *phy_dwc3);
++	int (*phy_exit)(struct qcom_dwc3_usb_phy *phy_dwc3);
++
++	struct clk		*xo_clk;
++	struct clk		*ref_clk;
++};
++
++/**
++ * Write register and read back masked value to confirm it is written
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @offset - register offset.
++ * @mask - register bitmask specifying what should be updated
++ * @val - value to write.
++ */
++static inline void qcom_dwc3_phy_write_readback(
++	struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset,
++	const u32 mask, u32 val)
++{
++	u32 write_val, tmp = readl(phy_dwc3->base + offset);
++
++	tmp &= ~mask;		/* retain other bits */
++	write_val = tmp | val;
++
++	writel(write_val, phy_dwc3->base + offset);
++
++	/* Read back to see if val was written */
++	tmp = readl(phy_dwc3->base + offset);
++	tmp &= mask;		/* clear other bits */
++
++	if (tmp != val)
++		dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n",
++			val, offset);
++}
++
++static int wait_for_latch(void __iomem *addr)
++{
++	u32 retry = 10;
++
++	while (true) {
++		if (!readl(addr))
++			break;
++
++		if (--retry == 0)
++			return -ETIMEDOUT;
++
++		usleep_range(10, 20);
++	}
++
++	return 0;
++}
++
++/**
++ * Write SSPHY register
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @addr - SSPHY address to write.
++ * @val - value to write.
++ */
++static int qcom_dwc3_ss_write_phycreg(void __iomem *base, u32 addr, u32 val)
++{
++	int ret;
++
++	writel(addr, base + CR_PROTOCOL_DATA_IN_REG);
++	writel(0x1, base + CR_PROTOCOL_CAP_ADDR_REG);
++
++	ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG);
++	if (ret)
++		goto err_wait;
++
++	writel(val, base + CR_PROTOCOL_DATA_IN_REG);
++	writel(0x1, base + CR_PROTOCOL_CAP_DATA_REG);
++
++	ret = wait_for_latch(base + CR_PROTOCOL_CAP_DATA_REG);
++	if (ret)
++		goto err_wait;
++
++	writel(0x1, base + CR_PROTOCOL_WRITE_REG);
++
++	ret = wait_for_latch(base + CR_PROTOCOL_WRITE_REG);
++
++err_wait:
++	return ret;
++}
++
++/**
++ * Read SSPHY register.
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @addr - SSPHY address to read.
++ */
++static int qcom_dwc3_ss_read_phycreg(void __iomem *base, u32 addr, u32 *val)
++{
++	int ret;
++	bool first_read = true;
++
++	writel(addr, base + CR_PROTOCOL_DATA_IN_REG);
++	writel(0x1, base + CR_PROTOCOL_CAP_ADDR_REG);
++
++	ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG);
++	if (ret)
++		goto err_wait;
++
++	/*
++	 * Due to hardware bug, first read of SSPHY register might be
++	 * incorrect. Hence as workaround, SW should perform SSPHY register
++	 * read twice, but use only second read and ignore first read.
++	 */
++retry:
++	writel(0x1, base + CR_PROTOCOL_READ_REG);
++
++	ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
++	if (ret)
++		goto err_wait;
++
++	if (first_read) {
++		readl(base + CR_PROTOCOL_DATA_OUT_REG);
++		first_read = false;
++		goto retry;
++	}
++
++	*val = readl(base + CR_PROTOCOL_DATA_OUT_REG);
++
++err_wait:
++	return ret;
++}
++
++static int qcom_dwc3_phy_power_on(struct phy *phy)
++{
++	int ret;
++	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++
++	ret = clk_prepare_enable(phy_dwc3->xo_clk);
++	if (ret)
++		return ret;
++
++	ret = clk_prepare_enable(phy_dwc3->ref_clk);
++	if (ret)
++		clk_disable_unprepare(phy_dwc3->xo_clk);
++
++	return ret;
++}
++
++static int qcom_dwc3_phy_power_off(struct phy *phy)
++{
++	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++
++	clk_disable_unprepare(phy_dwc3->ref_clk);
++	clk_disable_unprepare(phy_dwc3->xo_clk);
++
++	return 0;
++}
++
++static int qcom_dwc3_hs_phy_init(struct qcom_dwc3_usb_phy *phy_dwc3)
++{
++	u32 val;
++
++	/*
++	 * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
++	 * enable clamping, and disable RETENTION (power-on default is ENABLED)
++	 */
++	val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
++		HSUSB_CTRL_RETENABLEN  | HSUSB_CTRL_COMMONONN |
++		HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
++		HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
++		HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
++
++	/* use core clock if external reference is not present */
++	if (!phy_dwc3->xo_clk)
++		val |= HSUSB_CTRL_USE_CLKCORE;
++
++	writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
++	usleep_range(2000, 2200);
++
++	/* Disable (bypass) VBUS and ID filters */
++	writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
++
++	return 0;
++}
++
++static int qcom_dwc3_ss_phy_init(struct qcom_dwc3_usb_phy *phy_dwc3)
++{
++	int ret;
++	u32 data = 0;
++
++	/* reset phy */
++	data = readl_relaxed(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++	writel_relaxed(data | SSUSB_CTRL_SS_PHY_RESET,
++		phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++	usleep_range(2000, 2200);
++	writel_relaxed(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++	/* clear REF_PAD if we don't have XO clk */
++	if (!phy_dwc3->xo_clk)
++		data &= ~SSUSB_CTRL_REF_USE_PAD;
++	else
++		data |= SSUSB_CTRL_REF_USE_PAD;
++
++	writel_relaxed(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++	msleep(30);
++
++	data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
++	writel_relaxed(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++	/*
++	 * Fix RX Equalization setting as follows
++	 * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
++	 * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
++	 * LANE0.RX_OVRD_IN_HI.RX_EQ set to 3
++	 * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
++	 */
++	ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
++			SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
++	if (ret)
++		goto err_phy_trans;
++
++	data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
++	data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
++	data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
++	data |= 0x3 << RX_OVRD_IN_HI_RX_EQ_SHIFT;
++	data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
++	ret = qcom_dwc3_ss_write_phycreg(phy_dwc3->base,
++		SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
++	if (ret)
++		goto err_phy_trans;
++
++	/*
++	 * Set EQ and TX launch amplitudes as follows
++	 * LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22
++	 * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127
++	 * LANE0.TX_OVRD_DRV_LO.EN set to 1.
++	 */
++	ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
++		SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
++	if (ret)
++		goto err_phy_trans;
++
++	data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
++	data |= 0x16 << TX_OVRD_DRV_LO_PREEMPH_SHIFT;
++	data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
++	data |= 0x7f;
++	data |= TX_OVRD_DRV_LO_EN;
++	ret = qcom_dwc3_ss_write_phycreg(phy_dwc3->base,
++		SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
++	if (ret)
++		goto err_phy_trans;
++
++	/*
++	 * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
++	 * TX_FULL_SWING [26:20] amplitude to 127
++	 * TX_DEEMPH_3_5DB [13:8] to 22
++	 * LOS_BIAS [2:0] to 0x5
++	 */
++	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
++				   0x07f03f07, 0x07f01605);
++
++err_phy_trans:
++	return ret;
++}
++
++static int qcom_dwc3_ss_phy_exit(struct qcom_dwc3_usb_phy *phy_dwc3)
++{
++	/* Sequence to put SSPHY in low power state:
++	 * 1. Clear REF_PHY_EN in PHY_CTRL_REG
++	 * 2. Clear REF_USE_PAD in PHY_CTRL_REG
++	 * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
++	 * 4. Disable SSPHY ref clk
++	 */
++	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++		SSUSB_CTRL_SS_PHY_EN, 0x0);
++	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++		SSUSB_CTRL_REF_USE_PAD, 0x0);
++	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++		0x0, SSUSB_CTRL_TEST_POWERDOWN);
++
++	return 0;
++}
++
++static int qcom_dwc3_phy_init(struct phy *phy)
++{
++	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++
++	if (phy_dwc3->phy_init)
++		return phy_dwc3->phy_init(phy_dwc3);
++
++	return 0;
++}
++
++static int qcom_dwc3_phy_exit(struct phy *phy)
++{
++	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++
++	if (phy_dwc3->phy_exit)
++		return qcom_dwc3_ss_phy_exit(phy_dwc3);
++
++	return 0;
++}
++
++static struct phy_ops qcom_dwc3_phy_ops = {
++	.init		= qcom_dwc3_phy_init,
++	.exit		= qcom_dwc3_phy_exit,
++	.power_on	= qcom_dwc3_phy_power_on,
++	.power_off	= qcom_dwc3_phy_power_off,
++	.owner		= THIS_MODULE,
++};
++
++static const struct of_device_id qcom_dwc3_phy_table[] = {
++	{ .compatible = "qcom,dwc3-hs-usb-phy", },
++	{ .compatible = "qcom,dwc3-ss-usb-phy", },
++	{ /* Sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table);
++
++static int qcom_dwc3_phy_probe(struct platform_device *pdev)
++{
++	struct qcom_dwc3_usb_phy	*phy_dwc3;
++	struct phy_provider		*phy_provider;
++	struct resource			*res;
++
++	phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
++	if (!phy_dwc3)
++		return -ENOMEM;
++
++	platform_set_drvdata(pdev, phy_dwc3);
++
++	phy_dwc3->dev = &pdev->dev;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	phy_dwc3->base = devm_ioremap_resource(phy_dwc3->dev, res);
++	if (IS_ERR(phy_dwc3->base))
++		return PTR_ERR(phy_dwc3->base);
++
++	phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
++	if (IS_ERR(phy_dwc3->ref_clk)) {
++		dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
++		return PTR_ERR(phy_dwc3->ref_clk);
++	}
++
++	if (of_device_is_compatible(pdev->dev.of_node,
++			"qcom,dwc3-hs-usb-phy")) {
++		clk_set_rate(phy_dwc3->ref_clk, 60000000);
++		phy_dwc3->phy_init = qcom_dwc3_hs_phy_init;
++	} else if (of_device_is_compatible(pdev->dev.of_node,
++			"qcom,dwc3-ss-usb-phy")) {
++		phy_dwc3->phy_init = qcom_dwc3_ss_phy_init;
++		phy_dwc3->phy_exit = qcom_dwc3_ss_phy_exit;
++		clk_set_rate(phy_dwc3->ref_clk, 125000000);
++	} else {
++		dev_err(phy_dwc3->dev, "Unknown phy\n");
++		return -EINVAL;
++	}
++
++	phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
++	if (IS_ERR(phy_dwc3->xo_clk)) {
++		dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
++		phy_dwc3->xo_clk = NULL;
++	}
++
++	phy_dwc3->phy = devm_phy_create(phy_dwc3->dev, NULL, &qcom_dwc3_phy_ops,
++					NULL);
++
++	if (IS_ERR(phy_dwc3->phy))
++		return PTR_ERR(phy_dwc3->phy);
++
++	phy_set_drvdata(phy_dwc3->phy, phy_dwc3);
++
++	phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
++			of_phy_simple_xlate);
++
++	if (IS_ERR(phy_provider))
++		return PTR_ERR(phy_provider);
++
++	return 0;
++}
++
++static struct platform_driver qcom_dwc3_phy_driver = {
++	.probe		= qcom_dwc3_phy_probe,
++	.driver		= {
++		.name	= "qcom-dwc3-usb-phy",
++		.owner	= THIS_MODULE,
++		.of_match_table = qcom_dwc3_phy_table,
++	},
++};
++
++module_platform_driver(qcom_dwc3_phy_driver);
++
++MODULE_ALIAS("platform:phy-qcom-dwc3");
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
++MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
++MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");