ipg806x: set v4.4 as default

Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 0 insertions, 53 deletions

diff --git a/target/linux/ipq806x/patches-3.18/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-3.18/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
deleted file mode 100644
index 319859b109..0000000000
--- a/target/linux/ipq806x/patches-3.18/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -46,15 +46,12 @@
- 			serial@16340000 {
- 				status = "ok";
- 			};
--
--			i2c4: i2c@16380000 {
--				status = "ok";
--
--				clock-frequency = <200000>;
--
--				pinctrl-0 = <&i2c4_pins>;
--				pinctrl-names = "default";
--			};
-+			/*
-+			 * The i2c device on gsbi4 should not be enabled.
-+			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-+			 * RPM usage. Turning this on in kernel manifests as
-+			 * i2c failure for the RPM.
-+			 */
- 		};
- 
- 		gsbi5: gsbi@1a200000 {
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -794,7 +794,7 @@ static struct clk_rcg gsbi7_qup_src = {
- 			.parent_names = gcc_pxo_pll8,
- 			.num_parents = 2,
- 			.ops = &clk_rcg_ops,
--			.flags = CLK_SET_PARENT_GATE,
-+			.flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
- 		},
- 	},
- };
-@@ -810,7 +810,7 @@ static struct clk_branch gsbi7_qup_clk =
- 			.parent_names = (const char *[]){ "gsbi7_qup_src" },
- 			.num_parents = 1,
- 			.ops = &clk_branch_ops,
--			.flags = CLK_SET_RATE_PARENT,
-+			.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
- 		},
- 	},
- };
-@@ -858,7 +858,7 @@ static struct clk_branch gsbi4_h_clk = {
- 		.hw.init = &(struct clk_init_data){
- 			.name = "gsbi4_h_clk",
- 			.ops = &clk_branch_ops,
--			.flags = CLK_IS_ROOT,
-+			.flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED,
- 		},
- 	},
- };