ipq806x: add v4.9 support

Signed-off-by: John Crispin <john@phrozen.org>

10 files changed, 0 insertions, 3628 deletions

diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
deleted file mode 100644
index 7eeaab1557..0000000000
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+++ /dev/null
@@ -1,501 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "TP-Link Archer C2600";
-	compatible = "tplink,c2600", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power;
-		led-failsafe = &general;
-		led-running = &power;
-		led-upgrade = &general;
-	};
-
-	chosen {
-		linux,stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		pinmux@800000 {
-			button_pins: button_pins {
-				mux {
-					pins = "gpio16", "gpio54", "gpio65";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			i2c4_pins: i2c4_pinmux {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "gsbi4";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			led_pins: led_pins {
-				mux {
-					pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
-					       "gpio53", "gpio66";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			spi_pins: spi_pins {
-				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					bias-pull-down;
-				};
-
-				data {
-					pins = "gpio18", "gpio19";
-					drive-strength = <10>;
-				};
-
-				cs {
-					pins = "gpio20";
-					function = "gpio";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-
-				clk {
-					pins = "gpio21";
-					drive-strength = <12>;
-				};
-			};
-
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			rgmii2_pins: rgmii2_pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			usb0_pwr_en_pin: usb0_pwr_en_pin {
-				mux {
-					pins = "gpio25";
-					function = "gpio";
-					drive-strength = <10>;
-					bias-pull-up;
-					output-high;
-				};
-			};
-
-			usb1_pwr_en_pin: usb1_pwr_en_pin {
-				mux {
-					pins = "gpio23";
-					function = "gpio";
-					drive-strength = <10>;
-					bias-pull-up;
-					output-high;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
-			serial@16340000 {
-				status = "ok";
-			};
-			/*
-			 * The i2c device on gsbi4 should not be enabled.
-			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-			 * RPM usage. Turning this on in kernel manifests as
-			 * i2c failure for the RPM.
-			 */
-		};
-
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
-
-			spi5: spi@1a280000 {
-				status = "ok";
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-				flash: m25p80@0 {
-					compatible = "jedec,spi-nor";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-
-					SBL1@0 {
-						label = "SBL1";
-						reg = <0x0 0x20000>;
-						read-only;
-					};
-
-					MIBIB@20000 {
-						label = "MIBIB";
-						reg = <0x20000 0x20000>;
-						read-only;
-					};
-
-					SBL2@40000 {
-						label = "SBL2";
-						reg = <0x40000 0x20000>;
-						read-only;
-					};
-
-					SBL3@60000 {
-						label = "SBL3";
-						reg = <0x60000 0x30000>;
-						read-only;
-					};
-
-					DDRCONFIG@90000 {
-						label = "DDRCONFIG";
-						reg = <0x90000 0x10000>;
-						read-only;
-					};
-
-					SSD@a0000 {
-						label = "SSD";
-						reg = <0xa0000 0x10000>;
-						read-only;
-					};
-
-					TZ@b0000 {
-						label = "TZ";
-						reg = <0xb0000 0x30000>;
-						read-only;
-					};
-
-					RPM@e0000 {
-						label = "RPM";
-						reg = <0xe0000 0x20000>;
-						read-only;
-					};
-
-					fs-uboot@100000 {
-						label = "fs-uboot";
-						reg = <0x100000 0x70000>;
-						read-only;
-					};
-
-					uboot-env@170000 {
-						label = "uboot-env";
-						reg = <0x170000 0x40000>;
-						read-only;
-					};
-
-					radio@1b0000 {
-						label = "radio";
-						reg = <0x1b0000 0x40000>;
-						read-only;
-					};
-
-					os-image@1f0000 {
-						label = "os-image";
-						reg = <0x1f0000 0x200000>;
-					};
-
-					rootfs@3f0000 {
-						label = "rootfs";
-						reg = <0x3f0000 0x1b00000>;
-					};
-
-					defaultmac: default-mac@1ef0000 {
-						label = "default-mac";
-						reg = <0x1ef0000 0x00200>;
-						read-only;
-					};
-
-					pin@1ef0200 {
-						label = "pin";
-						reg = <0x1ef0200 0x00200>;
-						read-only;
-					};
-
-					product-info@1ef0400 {
-						label = "product-info";
-						reg = <0x1ef0400 0x0fc00>;
-						read-only;
-					};
-
-					partition-table@1f00000 {
-						label = "partition-table";
-						reg = <0x1f00000 0x10000>;
-						read-only;
-					};
-
-					soft-version@1f10000 {
-						label = "soft-version";
-						reg = <0x1f10000 0x10000>;
-						read-only;
-					};
-
-					support-list@1f20000 {
-						label = "support-list";
-						reg = <0x1f20000 0x10000>;
-						read-only;
-					};
-
-					profile@1f30000 {
-						label = "profile";
-						reg = <0x1f30000 0x10000>;
-						read-only;
-					};
-
-					default-config@1f40000 {
-						label = "default-config";
-						reg = <0x1f40000 0x10000>;
-						read-only;
-					};
-
-					user-config@1f50000 {
-						label = "user-config";
-						reg = <0x1f50000 0x40000>;
-						read-only;
-					};
-
-					qos-db@1f90000 {
-						label = "qos-db";
-						reg = <0x1f90000 0x40000>;
-						read-only;
-					};
-
-					usb-config@1fd0000 {
-						label = "usb-config";
-						reg = <0x1fd0000 0x10000>;
-						read-only;
-					};
-
-					log@1fe0000 {
-						label = "log";
-						reg = <0x1fe0000 0x20000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
-		};
-
-		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
-		};
-
-		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
-		};
-
-		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
-		};
-
-		usb30@0 {
-			status = "ok";
-
-			pinctrl-0 = <&usb0_pwr_en_pin>;
-			pinctrl-names = "default";
-		};
-
-		usb30@1 {
-			status = "ok";
-
-			pinctrl-0 = <&usb1_pwr_en_pin>;
-			pinctrl-names = "default";
-		};
-
-		pcie0: pci@1b500000 {
-			status = "ok";
-			phy-tx0-term-offset = <7>;
-		};
-
-		pcie1: pci@1b700000 {
-			status = "ok";
-			phy-tx0-term-offset = <7>;
-		};
-
-		mdio0: mdio {
-			compatible = "virtual,mdio-gpio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-0 = <&mdio0_pins>;
-			pinctrl-names = "default";
-
-			phy0: ethernet-phy@0 {
-				device_type = "ethernet-phy";
-				reg = <0>;
-				qca,ar8327-initvals = <
-					0x00004 0x7600000   /* PAD0_MODE */
-					0x00008 0x1000000   /* PAD5_MODE */
-					0x0000c 0x80        /* PAD6_MODE */
-					0x000e4 0x6a545     /* MAC_POWER_SEL */
-					0x000e0 0xc74164de  /* SGMII_CTRL */
-					0x0007c 0x4e        /* PORT0_STATUS */
-					0x00094 0x4e        /* PORT6_STATUS */
-					>;
-			};
-
-			phy4: ethernet-phy@4 {
-				device_type = "ethernet-phy";
-				reg = <4>;
-			};
-		};
-
-		gmac1: ethernet@37200000 {
-			status = "ok";
-			phy-mode = "rgmii";
-			qcom,id = <1>;
-
-			pinctrl-0 = <&rgmii2_pins>;
-			pinctrl-names = "default";
-
-			mtd-mac-address = <&defaultmac 0x8>;
-			mtd-mac-address-increment = <1>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		gmac2: ethernet@37400000 {
-			status = "ok";
-			phy-mode = "sgmii";
-			qcom,id = <2>;
-
-			mtd-mac-address = <&defaultmac 0x8>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		rpm@108000 {
-			pinctrl-0 = <&i2c4_pins>;
-			pinctrl-names = "default";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		ledswitch {
-			label = "ledswitch";
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LIGHTS_TOGGLE>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		lan {
-			label = "c2600:white:lan";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb4 {
-			label = "c2600:white:usb_4";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb2 {
-			label = "c2600:white:usb_2";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "c2600:white:wps";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_amber {
-			label = "c2600:amber:wan";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
-		};
-
-		wan_white {
-			label = "c2600:white:wan";
-			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
-		};
-
-		power: power {
-			label = "c2600:white:power";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		general: general {
-			label = "c2600:white:general";
-			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&adm_dma {
-	status = "ok";
-};
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
deleted file mode 100644
index a8a613945f..0000000000
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
+++ /dev/null
@@ -1,406 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear Nighthawk X4 D7800";
-	compatible = "netgear,d7800", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0xe000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power_white;
-		led-failsafe = &power_amber;
-		led-running = &power_white;
-		led-upgrade = &power_amber;
-	};
-
-	chosen {
-		bootargs = "rootfstype=squashfs noinitrd";
-		linux,stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		pinmux@800000 {
-			button_pins: button_pins {
-				mux {
-					pins = "gpio6", "gpio54", "gpio65";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			i2c4_pins: i2c4_pinmux {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "gsbi4";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			led_pins: led_pins {
-				mux {
-					pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-						"gpio24","gpio26", "gpio53", "gpio64";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			nand_pins: nand_pins {
-				mux {
-					pins = "gpio34", "gpio35", "gpio36",
-					       "gpio37", "gpio38", "gpio39",
-					       "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-disable;
-				};
-				pullups {
-					pins = "gpio39";
-					bias-pull-up;
-				};
-				hold {
-					pins = "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					bias-bus-hold;
-				};
-			};
-
-			rgmii2_pins: rgmii2_pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			usb0_pwr_en_pins: usb0_pwr_en_pins {
-				mux {
-					pins = "gpio15";
-					function = "gpio";
-					drive-strength = <12>;
-					bias-pull-down;
-					output-high;
-				};
-			};
-
-			usb1_pwr_en_pins: usb1_pwr_en_pins {
-				mux {
-					pins = "gpio16", "gpio68";
-					function = "gpio";
-					drive-strength = <12>;
-					bias-pull-down;
-					output-high;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
-			serial@16340000 {
-				status = "ok";
-			};
-			/*
-			 * The i2c device on gsbi4 should not be enabled.
-			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-			 * RPM usage. Turning this on in kernel manifests as
-			 * i2c failure for the RPM.
-			 */
-		};
-
-		sata-phy@1b400000 {
-			status = "ok";
-		};
-
-		sata@29000000 {
-			status = "ok";
-		};
-
-		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
-		};
-
-		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
-		};
-
-		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
-		};
-
-		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
-		};
-
-		usb30@0 {
-			status = "ok";
-
-			pinctrl-0 = <&usb0_pwr_en_pins>;
-			pinctrl-names = "default";
-		};
-
-		usb30@1 {
-			status = "ok";
-
-			pinctrl-0 = <&usb1_pwr_en_pins>;
-			pinctrl-names = "default";
-		};
-
-		pcie0: pci@1b500000 {
-			status = "ok";
-			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
-			pinctrl-0 = <&pcie0_pins>;
-			pinctrl-names = "default";
-		};
-
-		pcie1: pci@1b700000 {
-			status = "ok";
-			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
-			pinctrl-0 = <&pcie1_pins>;
-			pinctrl-names = "default";
-		};
-
-		nand@1ac00000 {
-			status = "ok";
-
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-
-			nand-ecc-strength = <4>;
-			nand-bus-width = <8>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qcadata@0 {
-				label = "qcadata";
-				reg = <0x0000000 0x0c80000>;
-				read-only;
-			};
-
-			APPSBL@c80000 {
-				label = "APPSBL";
-				reg = <0x0c80000 0x0500000>;
-				read-only;
-			};
-
-			APPSBLENV@1180000 {
-				label = "APPSBLENV";
-				reg = <0x1180000 0x0080000>;
-				read-only;
-			};
-
-			art: art@1200000 {
-				label = "art";
-				reg = <0x1200000 0x0140000>;
-				read-only;
-			};
-
-			artbak: art@1340000 {
-				label = "artbak";
-				reg = <0x1340000 0x0140000>;
-				read-only;
-			};
-
-			kernel@1480000 {
-				label = "kernel";
-				reg = <0x1480000 0x0200000>;
-			};
-
-			ubi@1680000 {
-				label = "ubi";
-				reg = <0x1680000 0x1E00000>;
-			};
-
-			netgear@3480000 {
-				label = "netgear";
-				reg = <0x3480000 0x4480000>;
-				read-only;
-			};
-
-			reserve@7900000 {
-				label = "reserve";
-				reg = <0x7900000 0x0700000>;
-				read-only;
-			};
-
-			firmware@1480000 {
-				label = "firmware";
-				reg = <0x1480000 0x2000000>;
-			};
-		};
-
-		mdio0: mdio {
-			compatible = "virtual,mdio-gpio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-0 = <&mdio0_pins>;
-			pinctrl-names = "default";
-
-			phy0: ethernet-phy@0 {
-				device_type = "ethernet-phy";
-				reg = <0>;
-				qca,ar8327-initvals = <
-					0x00004 0x7600000   /* PAD0_MODE */
-					0x00008 0x1000000   /* PAD5_MODE */
-					0x0000c 0x80        /* PAD6_MODE */
-					0x000e4 0x6a545     /* MAC_POWER_SEL */
-					0x000e0 0xc74164de  /* SGMII_CTRL */
-					0x0007c 0x4e        /* PORT0_STATUS */
-					0x00094 0x4e        /* PORT6_STATUS */
-					>;
-			};
-
-			phy4: ethernet-phy@4 {
-				device_type = "ethernet-phy";
-				reg = <4>;
-			};
-		};
-
-		gmac1: ethernet@37200000 {
-			status = "ok";
-			phy-mode = "rgmii";
-			phy-handle = <&phy4>;
-			qcom,id = <1>;
-
-			pinctrl-0 = <&rgmii2_pins>;
-			pinctrl-names = "default";
-
-			mtd-mac-address = <&art 6>;
-		};
-
-		gmac2: ethernet@37400000 {
-			status = "ok";
-			phy-mode = "sgmii";
-			qcom,id = <2>;
-
-			mtd-mac-address = <&art 0>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		rpm@108000 {
-			pinctrl-0 = <&i2c4_pins>;
-			pinctrl-names = "default";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		usb1 {
-			label = "d7800:white:usb1";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb2 {
-			label = "d7800:white:usb2";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_amber: power_amber {
-			label = "d7800:amber:power";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_white {
-			label = "d7800:white:wan";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_amber {
-			label = "d7800:amber:wan";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "d7800:white:wps";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-		};
-
-		esata {
-			label = "d7800:white:esata";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_white: power_white {
-			label = "d7800:white:power";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		wifi {
-			label = "d7800:white:wifi";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&adm_dma {
-	status = "ok";
-};
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
deleted file mode 100644
index b5840e8717..0000000000
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ /dev/null
@@ -1,399 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Linksys EA8500 WiFi Router";
-	compatible = "linksys,ea8500", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200n8"; 
-		linux,stdout-path = "serial0:115200n8";
-		append-rootblock = "ubi.mtd=";  /* append to bootargs adding the root deviceblock nbr from bootloader */
-	};
-
-	soc {
-		pinmux@800000 {
-			button_pins: button_pins {
-				mux {
-					pins = "gpio65", "gpio67", "gpio68";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			i2c4_pins: i2c4_pinmux {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "gsbi4";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			led_pins: led_pins {
-				mux {
-					pins = "gpio6", "gpio53", "gpio54";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			nand_pins: nand_pins {
-				mux {
-					pins = "gpio34", "gpio35", "gpio36",
-					       "gpio37", "gpio38", "gpio39",
-					       "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-disable;
-				};
-				pullups {
-					pins = "gpio39";
-					bias-pull-up;
-				};
-				hold {
-					pins = "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					bias-bus-hold;
-				};
-			};
-
-			rgmii2_pins: rgmii2_pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
-			serial@16340000 {
-				status = "ok";
-			};
-			/*
-			 * The i2c device on gsbi4 should not be enabled.
-			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-			 * RPM usage. Turning this on in kernel manifests as
-			 * i2c failure for the RPM.
-			 */
-		};
-
-		sata-phy@1b400000 {
-			status = "ok";
-		};
-
-		sata@29000000 {
-			status = "ok";
-		};
-
-		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
-		};
-
-		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
-		};
-
-		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
-		};
-
-		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
-		};
-
-		usb30@0 {
-			status = "ok";
-		};
-
-		usb30@1 {
-			status = "ok";
-		};
-
-		pcie0: pci@1b500000 {
-			status = "ok";
-			phy-tx0-term-offset = <7>;
-		};
-
-		pcie1: pci@1b700000 {
-			status = "ok";
-			phy-tx0-term-offset = <7>;
-		};
-		
-		pcie2: pci@1b900000 {
-			status = "ok";
-			phy-tx0-term-offset = <7>;
-		};
-		
-		nand@1ac00000 {
-			status = "ok";
-
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-
-			nand-ecc-strength = <4>;
-			nand-bus-width = <8>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			SBL1@0 {
-				label = "SBL1";
-				reg = <0x0000000 0x0040000>;
-				read-only;
-			};
-
-			MIBIB@40000 {
-				label = "MIBIB";
-				reg = <0x0040000 0x0140000>;
-				read-only;
-			};
-
-			SBL2@180000 {
-				label = "SBL2";
-				reg = <0x0180000 0x0140000>;
-				read-only;
-			};
-
-			SBL3@2c0000 {
-				label = "SBL3";
-				reg = <0x02c0000 0x0280000>;
-				read-only;
-			};
-
-			DDRCONFIG@540000 {
-				label = "DDRCONFIG";
-				reg = <0x0540000 0x0120000>;
-				read-only;
-			};
-
-			SSD@660000 {
-				label = "SSD";
-				reg = <0x0660000 0x0120000>;
-				read-only;
-			};
-
-			TZ@780000 {
-				label = "TZ";
-				reg = <0x0780000 0x0280000>;
-				read-only;
-			};
-
-			RPM@a00000 {
-				label = "RPM";
-				reg = <0x0a00000 0x0280000>;
-				read-only;
-			};
-
-			art: art@c80000 {
-				label = "art";
-				reg = <0x0c80000 0x0140000>;
-				read-only;
-			};
-
-			APPSBL@dc0000 {
-				label = "APPSBL";
-				reg = <0x0dc0000 0x0100000>;
-				read-only;
-			};
-
-			u_env@ec0000 {
-				label = "u_env";
-				reg = <0x0ec0000 0x0040000>;
-			};
-
-			s_env@f00000 {
-				label = "s_env";
-				reg = <0x0f00000 0x0040000>;
-			};
-
-			devinfo@f40000 {
-				label = "devinfo";
-				reg = <0x0f40000 0x0040000>;
-			};
-
-			linux@f80000 { 
-				label = "kernel1";
-				reg = <0x0f80000 0x2800000>;  /* 3 MB spill to rootfs*/
-			};
-
-			rootfs@1280000 {
-				label = "rootfs1";
-				reg = <0x1280000 0x2500000>;
-			};
-
-			linux2@3780000 {
-				label = "kernel2";
-				reg = <0x3780000 0x2800000>;
-			};
-
-			rootfs2@3a80000 {
-				label = "rootfs2";
-				reg = <0x3a80000 0x2500000>;
-			};
-
-			syscfg@5f80000 {
-				label = "syscfg";
-				reg = <0x5f80000 0x2080000>;
-			};
-		};
-
-		mdio0: mdio {
-			compatible = "virtual,mdio-gpio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-0 = <&mdio0_pins>;
-			pinctrl-names = "default";
-
-			phy0: ethernet-phy@0 {
-				device_type = "ethernet-phy";
-				reg = <0>;
-				qca,ar8327-initvals = <
-					0x00004 0x7600000   /* PAD0_MODE */
-					0x00008 0x1000000   /* PAD5_MODE */
-					0x0000c 0x80        /* PAD6_MODE */
-					0x000e4 0x6a545     /* MAC_POWER_SEL */
-					0x000e0 0xc74164de  /* SGMII_CTRL */
-					0x0007c 0x4e        /* PORT0_STATUS */
-					0x00094 0x4e        /* PORT6_STATUS */
-					>;
-			};
-
-			phy4: ethernet-phy@4 {
-				device_type = "ethernet-phy";
-				reg = <4>;
-			};
-		};
-
-		gmac1: ethernet@37200000 {
-			status = "ok";
-			phy-mode = "rgmii";
-			qcom,id = <1>;
-			qcom,phy_mdio_addr = <4>;
-			qcom,poll_required = <1>;
-			qcom,rgmii_delay = <0>;
-			qcom,emulation = <0>;
-			pinctrl-0 = <&rgmii2_pins>;
-			pinctrl-names = "default";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-		//lan
-		gmac2: ethernet@37400000 {
-			status = "ok";
-			phy-mode = "sgmii";
-			qcom,id = <2>;
-			qcom,phy_mdio_addr = <0>;	/* none */
-			qcom,poll_required = <0>;	/* no polling */
-			qcom,rgmii_delay = <0>;
-			qcom,emulation = <0>;
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		rpm@108000 {
-			pinctrl-0 = <&i2c4_pins>;
-			pinctrl-names = "default";
-		};
-
-		adm_dma: dma@18300000 {
-			status = "ok";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART >;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		wps {
-			label = "ea8500:green:wps";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "ea8500:white:power";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		wifi {
-			label = "ea8500:green:wifi";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
deleted file mode 100644
index fc35df7e68..0000000000
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
+++ /dev/null
@@ -1,373 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear Nighthawk X4 R7500";
-	compatible = "netgear,r7500", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0xe000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power_white;
-		led-failsafe = &power_amber;
-		led-running = &power_white;
-		led-upgrade = &power_amber;
-	};
-
-	chosen {
-		bootargs = "rootfstype=squashfs noinitrd";
-		linux,stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		pinmux@800000 {
-			button_pins: button_pins {
-				mux {
-					pins = "gpio6", "gpio54", "gpio65";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			i2c4_pins: i2c4_pinmux {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "gsbi4";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			led_pins: led_pins {
-				mux {
-					pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-						"gpio24","gpio26", "gpio53", "gpio64";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			nand_pins: nand_pins {
-				mux {
-					pins = "gpio34", "gpio35", "gpio36",
-					       "gpio37", "gpio38", "gpio39",
-					       "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-disable;
-				};
-				pullups {
-					pins = "gpio39";
-					bias-pull-up;
-				};
-				hold {
-					pins = "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					bias-bus-hold;
-				};
-			};
-
-			rgmii2_pins: rgmii2_pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
-			serial@16340000 {
-				status = "ok";
-			};
-			/*
-			 * The i2c device on gsbi4 should not be enabled.
-			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-			 * RPM usage. Turning this on in kernel manifests as
-			 * i2c failure for the RPM.
-			 */
-		};
-
-		sata-phy@1b400000 {
-			status = "ok";
-		};
-
-		sata@29000000 {
-			status = "ok";
-		};
-
-		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
-		};
-
-		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
-		};
-
-		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
-		};
-
-		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
-		};
-
-		usb30@0 {
-			status = "ok";
-		};
-
-		usb30@1 {
-			status = "ok";
-		};
-
-		pcie0: pci@1b500000 {
-			status = "ok";
-		};
-
-		pcie1: pci@1b700000 {
-			status = "ok";
-		};
-
-		nand@1ac00000 {
-			status = "ok";
-
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-
-			nand-ecc-strength = <4>;
-			nand-bus-width = <8>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qcadata@0 {
-				label = "qcadata";
-				reg = <0x0000000 0x0c80000>;
-				read-only;
-			};
-
-			APPSBL@c80000 {
-				label = "APPSBL";
-				reg = <0x0c80000 0x0500000>;
-				read-only;
-			};
-
-			APPSBLENV@1180000 {
-				label = "APPSBLENV";
-				reg = <0x1180000 0x0080000>;
-				read-only;
-			};
-
-			art: art@1200000 {
-				label = "art";
-				reg = <0x1200000 0x0140000>;
-				read-only;
-			};
-
-			kernel@1340000 {
-				label = "kernel";
-				reg = <0x1340000 0x0200000>;
-			};
-
-			ubi@1540000 {
-				label = "ubi";
-				reg = <0x1540000 0x1800000>;
-			};
-
-			netgear@2d40000 {
-				label = "netgear";
-				reg = <0x2d40000 0x0c00000>;
-				read-only;
-			};
-
-			reserve@3940000 {
-				label = "reserve";
-				reg = <0x3940000 0x46c0000>;
-				read-only;
-			};
-
-			firmware@1340000 {
-				label = "firmware";
-				reg = <0x1340000 0x1a00000>;
-			};
-
-		};
-
-		mdio0: mdio {
-			compatible = "virtual,mdio-gpio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-0 = <&mdio0_pins>;
-			pinctrl-names = "default";
-
-			phy0: ethernet-phy@0 {
-				device_type = "ethernet-phy";
-				reg = <0>;
-				qca,ar8327-initvals = <
-					0x00004 0x7600000   /* PAD0_MODE */
-					0x00008 0x1000000   /* PAD5_MODE */
-					0x0000c 0x80        /* PAD6_MODE */
-					0x000e4 0x6a545     /* MAC_POWER_SEL */
-					0x000e0 0xc74164de  /* SGMII_CTRL */
-					0x0007c 0x4e        /* PORT0_STATUS */
-					0x00094 0x4e        /* PORT6_STATUS */
-					>;
-			};
-
-			phy4: ethernet-phy@4 {
-				device_type = "ethernet-phy";
-				reg = <4>;
-			};
-		};
-
-		gmac1: ethernet@37200000 {
-			status = "ok";
-			phy-mode = "rgmii";
-			qcom,id = <1>;
-
-			pinctrl-0 = <&rgmii2_pins>;
-			pinctrl-names = "default";
-
-			mtd-mac-address = <&art 6>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		gmac2: ethernet@37400000 {
-			status = "ok";
-			phy-mode = "sgmii";
-			qcom,id = <2>;
-
-			mtd-mac-address = <&art 0>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		rpm@108000 {
-			pinctrl-0 = <&i2c4_pins>;
-			pinctrl-names = "default";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		usb1 {
-			label = "r7500:white:usb1";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb2 {
-			label = "r7500:white:usb2";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_amber: power_amber {
-			label = "r7500:amber:power";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_white {
-			label = "r7500:white:wan";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_amber {
-			label = "r7500:amber:wan";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "r7500:white:wps";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-		};
-
-		esata {
-			label = "r7500:white:esata";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_white: power_white {
-			label = "r7500:white:power";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		wifi {
-			label = "r7500:white:wifi";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&adm_dma {
-	status = "ok";
-};
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
deleted file mode 100644
index 4edfbeb72d..0000000000
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
+++ /dev/null
@@ -1,416 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear Nighthawk X4 R7500v2";
-	compatible = "netgear,r7500v2", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-
-		rsvd@5fe00000 {
-			reg = <0x5fe00000 0x200000>;
-			reusable;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	chosen {
-		bootargs = "rootfstype=squashfs noinitrd";
-		linux,stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		pinmux@800000 {
-			button_pins: button_pins {
-				mux {
-					pins = "gpio6", "gpio54", "gpio65";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			i2c4_pins: i2c4_pinmux {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "gsbi4";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			led_pins: led_pins {
-				mux {
-					pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-						"gpio24","gpio26", "gpio53", "gpio64";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			nand_pins: nand_pins {
-				mux {
-					pins = "gpio34", "gpio35", "gpio36",
-					       "gpio37", "gpio38", "gpio39",
-					       "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-disable;
-				};
-				pullups {
-					pins = "gpio39";
-					bias-pull-up;
-				};
-				hold {
-					pins = "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					bias-bus-hold;
-				};
-			};
-
-			rgmii2_pins: rgmii2_pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			usb0_pwr_en_pins: usb0_pwr_en_pins {
-				mux {
-					pins = "gpio15";
-					function = "gpio";
-					drive-strength = <12>;
-					bias-pull-down;
-					output-high;
-				};
-			};
-
-			usb1_pwr_en_pins: usb1_pwr_en_pins {
-				mux {
-					pins = "gpio16", "gpio68";
-					function = "gpio";
-					drive-strength = <12>;
-					bias-pull-down;
-					output-high;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
-			serial@16340000 {
-				status = "ok";
-			};
-			/*
-			 * The i2c device on gsbi4 should not be enabled.
-			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-			 * RPM usage. Turning this on in kernel manifests as
-			 * i2c failure for the RPM.
-			 */
-		};
-
-		sata-phy@1b400000 {
-			status = "ok";
-		};
-
-		sata@29000000 {
-			status = "ok";
-		};
-
-		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
-		};
-
-		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
-		};
-
-		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
-		};
-
-		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
-		};
-
-		usb30@0 {
-			status = "ok";
-
-			pinctrl-0 = <&usb0_pwr_en_pins>;
-			pinctrl-names = "default";
-		};
-
-		usb30@1 {
-			status = "ok";
-
-			pinctrl-0 = <&usb1_pwr_en_pins>;
-			pinctrl-names = "default";
-		};
-
-		pcie0: pci@1b500000 {
-			status = "ok";
-			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-			pinctrl-0 = <&pcie0_pins>;
-			pinctrl-names = "default";
-		};
-
-		pcie1: pci@1b700000 {
-			status = "ok";
-			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-			pinctrl-0 = <&pcie1_pins>;
-			pinctrl-names = "default";
-		};
-
-		nand@1ac00000 {
-			status = "ok";
-
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-
-			nand-ecc-strength = <4>;
-			nand-bus-width = <8>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qcadata@0 {
-				label = "qcadata";
-				reg = <0x0000000 0x0c80000>;
-				read-only;
-			};
-
-			APPSBL@c80000 {
-				label = "APPSBL";
-				reg = <0x0c80000 0x0500000>;
-				read-only;
-			};
-
-			APPSBLENV@1180000 {
-				label = "APPSBLENV";
-				reg = <0x1180000 0x0080000>;
-				read-only;
-			};
-
-			art: art@1200000 {
-				label = "art";
-				reg = <0x1200000 0x0140000>;
-				read-only;
-			};
-
-			artbak: art@1340000 {
-				label = "artbak";
-				reg = <0x1340000 0x0140000>;
-				read-only;
-			};
-
-			kernel@1480000 {
-				label = "kernel";
-				reg = <0x1480000 0x0200000>;
-			};
-
-			ubi@1680000 {
-				label = "ubi";
-				reg = <0x1680000 0x1E00000>;
-			};
-
-			netgear@3480000 {
-				label = "netgear";
-				reg = <0x3480000 0x4480000>;
-				read-only;
-			};
-
-			reserve@7900000 {
-				label = "reserve";
-				reg = <0x7900000 0x0700000>;
-				read-only;
-			};
-
-			firmware@1480000 {
-				label = "firmware";
-				reg = <0x1480000 0x2000000>;
-			};
-
-		};
-
-		mdio0: mdio {
-			compatible = "virtual,mdio-gpio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-0 = <&mdio0_pins>;
-			pinctrl-names = "default";
-
-			phy0: ethernet-phy@0 {
-				device_type = "ethernet-phy";
-				reg = <0>;
-				qca,ar8327-initvals = <
-					0x00004 0x7600000   /* PAD0_MODE */
-					0x00008 0x1000000   /* PAD5_MODE */
-					0x0000c 0x80        /* PAD6_MODE */
-					0x000e4 0xaa545     /* MAC_POWER_SEL */
-					0x000e0 0xc74164de  /* SGMII_CTRL */
-					0x0007c 0x4e        /* PORT0_STATUS */
-					0x00094 0x4e        /* PORT6_STATUS */
-					>;
-			};
-
-			phy4: ethernet-phy@4 {
-				device_type = "ethernet-phy";
-				reg = <4>;
-			};
-		};
-
-		gmac1: ethernet@37200000 {
-			status = "ok";
-			phy-mode = "rgmii";
-			qcom,id = <1>;
-
-			pinctrl-0 = <&rgmii2_pins>;
-			pinctrl-names = "default";
-
-			mtd-mac-address = <&art 6>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		gmac2: ethernet@37400000 {
-			status = "ok";
-			phy-mode = "sgmii";
-			qcom,id = <2>;
-
-			mtd-mac-address = <&art 0>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		rpm@108000 {
-			pinctrl-0 = <&i2c4_pins>;
-			pinctrl-names = "default";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		usb1 {
-			label = "r7500v2:amber:usb1";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb3 {
-			label = "r7500v2:amber:usb3";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		status {
-			label = "r7500v2:amber:status";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		internet {
-			label = "r7500v2:white:internet";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan {
-			label = "r7500v2:white:wan";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "r7500v2:white:wps";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-		};
-
-		esata {
-			label = "r7500v2:white:esata";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "r7500v2:white:power";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		wifi {
-			label = "r7500v2:white:wifi";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&adm_dma {
-	status = "ok";
-};
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
deleted file mode 100644
index 407c180ec5..0000000000
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
+++ /dev/null
@@ -1,425 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "TP-Link Archer VR2600v";
-	compatible = "tplink,vr2600v", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power;
-		led-failsafe = &general;
-		led-running = &power;
-		led-upgrade = &general;
-	};
-
-	chosen {
-		linux,stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		pinmux@800000 {
-			led_pins: led_pins {
-				mux {
-					pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
-						"gpio26", "gpio53", "gpio56", "gpio66";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			i2c4_pins: i2c4_pinmux {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "gsbi4";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			button_pins: button_pins {
-				mux {
-					pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			spi_pins: spi_pins {
-				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					bias-pull-down;
-				};
-
-				data {
-					pins = "gpio18", "gpio19";
-					drive-strength = <10>;
-				};
-
-				cs {
-					pins = "gpio20";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-
-				clk {
-					pins = "gpio21";
-					drive-strength = <12>;
-				};
-			};
-
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			rgmii2_pins: rgmii2_pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
-			serial@16340000 {
-				status = "ok";
-			};
-			/*
-			 * The i2c device on gsbi4 should not be enabled.
-			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-			 * RPM usage. Turning this on in kernel manifests as
-			 * i2c failure for the RPM.
-			 */
-		};
-
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
-
-			spi4: spi@1a280000 {
-				status = "ok";
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-				flash: W25Q128@0 {
-					compatible = "jedec,spi-nor";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-
-					SBL1@0 {
-						label = "SBL1";
-						reg = <0x0 0x20000>;
-						read-only;
-					};
-
-					MIBIB@20000 {
-						label = "MIBIB";
-						reg = <0x20000 0x20000>;
-						read-only;
-					};
-
-					SBL2@40000 {
-						label = "SBL2";
-						reg = <0x40000 0x40000>;
-						read-only;
-					};
-
-					SBL3@80000 {
-						label = "SBL3";
-						reg = <0x80000 0x80000>;
-						read-only;
-					};
-
-					DDRCONFIG@100000 {
-						label = "DDRCONFIG";
-						reg = <0x100000 0x10000>;
-						read-only;
-					};
-
-					SSD@110000 {
-						label = "SSD";
-						reg = <0x110000 0x10000>;
-						read-only;
-					};
-
-					TZ@120000 {
-						label = "TZ";
-						reg = <0x120000 0x80000>;
-						read-only;
-					};
-
-					RPM@1a0000 {
-						label = "RPM";
-						reg = <0x1a0000 0x80000>;
-						read-only;
-					};
-
-					APPSBL@220000 {
-						label = "APPSBL";
-						reg = <0x220000 0x80000>;
-						read-only;
-					};
-
-					APPSBLENV@2a0000 {
-						label = "APPSBLENV";
-						reg = <0x2a0000 0x40000>;
-						read-only;
-					};
-
-					OLDART@2e0000 {
-						label = "OLDART";
-						reg = <0x2e0000 0x40000>;
-						read-only;
-					};
-
-					kernel@320000 {
-						label = "kernel";
-						reg = <0x320000 0x200000>;
-					};
-
-					rootfs@520000 {
-						label = "rootfs";
-						reg = <0x520000 0xa60000>;
-					};
-
-					defaultmac: default-mac@0xfaf100 {
-						label = "default-mac";
-						reg = <0xfaf100 0x00200>;
-						read-only;
-					};
-
-					ART@fc0000 {
-						label = "ART";
-						reg = <0xfc0000 0x40000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
-		};
-
-		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
-		};
-
-		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
-		};
-
-		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
-		};
-
-		usb30@0 {
-			status = "ok";
-		};
-
-		usb30@1 {
-			status = "ok";
-		};
-
-		pcie0: pci@1b500000 {
-			status = "ok";
-			phy-tx0-term-offset = <7>;
-		};
-
-		pcie1: pci@1b700000 {
-			status = "ok";
-			phy-tx0-term-offset = <7>;
-		};
-
-		mdio0: mdio {
-			compatible = "virtual,mdio-gpio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-0 = <&mdio0_pins>;
-			pinctrl-names = "default";
-
-			phy0: ethernet-phy@0 {
-				device_type = "ethernet-phy";
-				reg = <0>;
-				qca,ar8327-initvals = <
-					0x00004 0x7600000   /* PAD0_MODE */
-					0x00008 0x1000000   /* PAD5_MODE */
-					0x0000c 0x80        /* PAD6_MODE */
-					0x000e4 0x6a545     /* MAC_POWER_SEL */
-					0x000e0 0xc74164de  /* SGMII_CTRL */
-					0x0007c 0x4e        /* PORT0_STATUS */
-					0x00094 0x4e        /* PORT6_STATUS */
-					>;
-			};
-
-			phy4: ethernet-phy@4 {
-				device_type = "ethernet-phy";
-				reg = <4>;
-			};
-		};
-
-		gmac1: ethernet@37200000 {
-			status = "ok";
-			phy-mode = "rgmii";
-			qcom,id = <1>;
-
-			pinctrl-0 = <&rgmii2_pins>;
-			pinctrl-names = "default";
-
-			mtd-mac-address = <&defaultmac 0>;
-			mtd-mac-address-increment = <1>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		gmac2: ethernet@37400000 {
-			status = "ok";
-			phy-mode = "sgmii";
-			qcom,id = <2>;
-
-			mtd-mac-address = <&defaultmac 0>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		rpm@108000 {
-			pinctrl-0 = <&i2c4_pins>;
-			pinctrl-names = "default";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		dect {
-			label = "dect";
-			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-		};
-
-		ledswitch {
-			label = "ledswitch";
-			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LIGHTS_TOGGLE>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		dsl {
-			label = "vr2600v:white:dsl";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb {
-			label = "vr2600v:white:usb";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan {
-			label = "vr2600v:white:lan";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "vr2600v:white:wlan2g";
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "vr2600v:white:wlan5g";
-			gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "vr2600v:white:power";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		phone {
-			label = "vr2600v:white:phone";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan {
-			label = "vr2600v:white:wan";
-			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
-		};
-
-		general: general {
-			label = "vr2600v:white:general";
-			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&adm_dma {
-	status = "ok";
-};
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
deleted file mode 100644
index 4db1a30592..0000000000
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
+++ /dev/null
@@ -1,388 +0,0 @@
-#include "qcom-ipq8065-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "ZyXEL NBG6817";
-	compatible = "zyxel,nbg6817", "qcom,ipq8065";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
-		mdio-gpio0 = &mdio0;
-		sdcc1 = &sdcc1;
-
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	chosen {
-		bootargs = "root=/dev/mmcblk0p5 rootfstype=squashfs,ext4 rootwait noinitrd";
-		linux,stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		pinmux@800000 {
-			button_pins: button_pins {
-				mux {
-					pins = "gpio6", "gpio54", "gpio65";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			i2c4_pins: i2c4_pinmux {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "gsbi4";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			led_pins: led_pins {
-				mux {
-					pins = "gpio9", "gpio26", "gpio33", "gpio64";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-				};
-			};
-
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-
-				clk {
-					pins = "gpio1";
-					input-disable;
-				};
-			};
-
-			rgmii2_pins: rgmii2_pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-
-				tx {
-					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
-					input-disable;
-				};
-			};
-
-			spi_pins: spi_pins {
-				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					drive-strength = <10>;
-					bias-none;
-				};
-
-				cs {
-					pins = "gpio20";
-					drive-strength = <12>;
-				};
-			};
-
-			usb0_pwr_en_pins: usb0_pwr_en_pins {
-				mux {
-					pins = "gpio16", "gpio17";
-					function = "gpio";
-					drive-strength = <12>;
-				};
-
-				pwr {
-					pins = "gpio17";
-					bias-pull-down;
-					output-high;
-				};
-
-				ovc {
-					pins = "gpio16";
-					bias-pull-up;
-				};
-			};
-
-			usb1_pwr_en_pins: usb1_pwr_en_pins {
-				mux {
-					pins = "gpio14", "gpio15";
-					function = "gpio";
-					drive-strength = <12>;
-				};
-
-				pwr {
-					pins = "gpio14";
-					bias-pull-down;
-					output-high;
-				};
-
-				ovc {
-					pins = "gpio15";
-					bias-pull-up;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
-			serial@16340000 {
-				status = "ok";
-			};
-			/*
-			 * The i2c device on gsbi4 should not be enabled.
-			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-			 * RPM usage. Turning this on in kernel manifests as
-			 * i2c failure for the RPM.
-			 */
-		};
-
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
-
-			spi4: spi@1a280000 {
-				status = "ok";
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-				flash: m25p80@0 {
-					compatible = "jedec,spi-nor";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <51200000>;
-					reg = <0>;
-
-					linux,part-probe = "qcom-smem";
-				};
-			};
-		};
-
-		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
-		};
-
-		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
-		};
-
-		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
-		};
-
-		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
-		};
-
-		usb30@0 {
-			status = "ok";
-
-			pinctrl-0 = <&usb0_pwr_en_pins>;
-			pinctrl-names = "default";
-		};
-
-		usb30@1 {
-			status = "ok";
-
-			pinctrl-0 = <&usb1_pwr_en_pins>;
-			pinctrl-names = "default";
-		};
-
-		pcie0: pci@1b500000 {
-			status = "ok";
-			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-			pinctrl-0 = <&pcie0_pins>;
-			pinctrl-names = "default";
-		};
-
-		pcie1: pci@1b700000 {
-			status = "ok";
-			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-			pinctrl-0 = <&pcie1_pins>;
-			pinctrl-names = "default";
-		};
-
-		mdio0: mdio {
-			compatible = "virtual,mdio-gpio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-0 = <&mdio0_pins>;
-			pinctrl-names = "default";
-
-			phy0: ethernet-phy@0 {
-				device_type = "ethernet-phy";
-				reg = <0>;
-				qca,ar8327-initvals = <
-					0x00004 0x7600000   /* PAD0_MODE */
-					0x00008 0x1000000   /* PAD5_MODE */
-					0x0000c 0x80        /* PAD6_MODE */
-					0x000e4 0xaa545     /* MAC_POWER_SEL */
-					0x000e0 0xc74164de  /* SGMII_CTRL */
-					0x0007c 0x4e        /* PORT0_STATUS */
-					0x00094 0x4e        /* PORT6_STATUS */
-					0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
-					0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
-					0x00978 0x19008643  /* QM_PORT1_CTRL0 */
-					0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
-					0x00980 0x19008643  /* QM_PORT2_CTRL0 */
-					0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
-					0x00988 0x19008643  /* QM_PORT3_CTRL0 */
-					0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
-					0x00990 0x19008643  /* QM_PORT4_CTRL0 */
-					0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
-					0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
-					0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
-					0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
-					0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
-					>;
-			};
-
-			phy4: ethernet-phy@4 {
-				device_type = "ethernet-phy";
-				reg = <4>;
-				qca,ar8327-initvals = <
-					0x000e4 0x6a545     /* MAC_POWER_SEL */
-					0x0000c 0x80        /* PAD6_MODE */
-					>;
-			};
-		};
-
-		gmac1: ethernet@37200000 {
-			status = "ok";
-			phy-mode = "rgmii";
-			qcom,id = <1>;
-			qcom,phy_mdio_addr = <4>;
-			qcom,poll_required = <0>;
-			qcom,rgmii_delay = <1>;
-			qcom,phy_mii_type = <0>;
-			qcom,emulation = <0>;
-			qcom,irq = <255>;
-			mdiobus = <&mdio0>;
-
-			pinctrl-0 = <&rgmii2_pins>;
-			pinctrl-names = "default";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		gmac2: ethernet@37400000 {
-			status = "ok";
-			phy-mode = "sgmii";
-			qcom,id = <2>;
-			qcom,phy_mdio_addr = <0>;	/* none */
-			qcom,poll_required = <0>;	/* no polling */
-			qcom,rgmii_delay = <0>;
-			qcom,phy_mii_type = <1>;
-			qcom,emulation = <0>;
-			qcom,irq = <258>;
-			mdiobus = <&mdio0>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		rpm@108000 {
-			pinctrl-0 = <&i2c4_pins>;
-			pinctrl-names = "default";
-		};
-
-		amba {
-			sdcc1: sdcc@12400000 {
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		internet {
-			label = "nbg6817:white:internet";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "nbg6817:white:power";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		wifi2g {
-			label = "nbg6817:amber:wifi2g";
-			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
-		};
-
-		/* wifi2g amber from the manual is missing */
-
-		wifi5g {
-			label = "nbg6817:amber:wifi5g";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		/* wifi5g amber from the manual is missing */
-	};
-};
-
-&adm_dma {
-	status = "ok";
-};
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
deleted file mode 100644
index 79c8334a42..0000000000
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ /dev/null
@@ -1,566 +0,0 @@
-#include "qcom-ipq8065-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear Nighthawk X4S R7800";
-	compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-
-		rsvd@5fe00000 {
-			reg = <0x5fe00000 0x200000>;
-			reusable;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power_white;
-		led-failsafe = &power_amber;
-		led-running = &power_white;
-		led-upgrade = &power_amber;
-	};
-
-	chosen {
-		linux,stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		pinmux@800000 {
-			button_pins: button_pins {
-				mux {
-					pins = "gpio6", "gpio54", "gpio65";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			i2c4_pins: i2c4_pinmux {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "gsbi4";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			led_pins: led_pins {
-				pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-					"gpio24","gpio26", "gpio53", "gpio64";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			nand_pins: nand_pins {
-				mux {
-					pins = "gpio34", "gpio35", "gpio36",
-					       "gpio37", "gpio38", "gpio39",
-					       "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-disable;
-				};
-				pullups {
-					pins = "gpio39";
-					bias-pull-up;
-				};
-				hold {
-					pins = "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					bias-bus-hold;
-				};
-			};
-
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-
-				clk {
-					pins = "gpio1";
-					input-disable;
-				};
-			};
-
-			rgmii2_pins: rgmii2_pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-
-				tx {
-					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
-					input-disable;
-				};
-			};
-
-			spi_pins: spi_pins {
-				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					bias-pull-down;
-				};
-
-				data {
-					pins = "gpio18", "gpio19";
-					drive-strength = <10>;
-				};
-
-				cs {
-					pins = "gpio20";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-
-				clk {
-					pins = "gpio21";
-					drive-strength = <12>;
-				};
-			};
-
-			spi6_pins: spi6_pins {
-				mux {
-					pins = "gpio55", "gpio56", "gpio58";
-					function = "gsbi6";
-					bias-pull-down;
-				};
-
-				mosi {
-					pins = "gpio55";
-					drive-strength = <12>;
-				};
-
-				miso {
-					pins = "gpio56";
-					drive-strength = <14>;
-				};
-
-				cs {
-					pins = "gpio57";
-					drive-strength = <12>;
-					bias-pull-up;
-				};
-
-				clk {
-					pins = "gpio58";
-					drive-strength = <12>;
-				};
-
-				reset {
-					pins = "gpio33";
-					drive-strength = <10>;
-					bias-pull-down;
-					output-high;
-				};
-			};
-
-			usb0_pwr_en_pins: usb0_pwr_en_pins {
-				mux {
-					pins = "gpio15";
-					function = "gpio";
-					drive-strength = <12>;
-					bias-pull-down;
-					output-high;
-				};
-			};
-
-			usb1_pwr_en_pins: usb1_pwr_en_pins {
-				mux {
-					pins = "gpio16", "gpio68";
-					function = "gpio";
-					drive-strength = <12>;
-					bias-pull-down;
-					output-high;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
-			serial@16340000 {
-				status = "ok";
-			};
-			/*
-			 * The i2c device on gsbi4 should not be enabled.
-			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-			 * RPM usage. Turning this on in kernel manifests as
-			 * i2c failure for the RPM.
-			 */
-		};
-
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
-
-			spi5: spi@1a280000 {
-				status = "ok";
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-				flash: m25p80@0 {
-					compatible = "jedec,spi-nor";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-
-					linux,part-probe = "qcom-smem";
-				};
-			};
-		};
-
-		gsbi6: gsbi@16500000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
-			spi6: spi@16580000 {
-				status = "ok";
-
-				pinctrl-0 = <&spi6_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
-
-				spi-nor@0 {
-					compatible = "jedec,spi-nor";
-					reg = <0>;
-					spi-max-frequency = <6000000>;
-				};
-			};
-		};
-
-		sata-phy@1b400000 {
-			status = "ok";
-		};
-
-		sata@29000000 {
-			ports-implemented = <0x1>;
-			status = "ok";
-		};
-
-		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
-		};
-
-		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
-		};
-
-		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
-		};
-
-		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
-		};
-
-		usb30@0 {
-			status = "ok";
-
-			pinctrl-0 = <&usb0_pwr_en_pins>;
-			pinctrl-names = "default";
-		};
-
-		usb30@1 {
-			status = "ok";
-
-			pinctrl-0 = <&usb1_pwr_en_pins>;
-			pinctrl-names = "default";
-		};
-
-		pcie0: pci@1b500000 {
-			status = "ok";
-			phy-tx0-term-offset = <7>;
-		};
-
-		pcie1: pci@1b700000 {
-			status = "ok";
-			phy-tx0-term-offset = <7>;
-		};
-
-		nand@1ac00000 {
-			status = "ok";
-
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-
-			nand-ecc-strength = <4>;
-			nand-ecc-step-size = <512>;
-			nand-bus-width = <8>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qcadata@0 {
-				label = "qcadata";
-				reg = <0x0000000 0x0c80000>;
-				read-only;
-			};
-
-			APPSBL@c80000 {
-				label = "APPSBL";
-				reg = <0x0c80000 0x0500000>;
-				read-only;
-			};
-
-			APPSBLENV@1180000 {
-				label = "APPSBLENV";
-				reg = <0x1180000 0x0080000>;
-				read-only;
-			};
-
-			art: art@1200000 {
-				label = "art";
-				reg = <0x1200000 0x0140000>;
-				read-only;
-			};
-
-			artbak: art@1340000 {
-				label = "artbak";
-				reg = <0x1340000 0x0140000>;
-				read-only;
-			};
-
-			kernel@1480000 {
-				label = "kernel";
-				reg = <0x1480000 0x0200000>;
-			};
-
-			ubi@1680000 {
-				label = "ubi";
-				reg = <0x1680000 0x1E00000>;
-			};
-
-			netgear@3480000 {
-				label = "netgear";
-				reg = <0x3480000 0x4480000>;
-				read-only;
-			};
-
-			reserve@7900000 {
-				label = "reserve";
-				reg = <0x7900000 0x0700000>;
-				read-only;
-			};
-
-			firmware@1480000 {
-				label = "firmware";
-				reg = <0x1480000 0x2000000>;
-			};
-		};
-
-		mdio0: mdio {
-			compatible = "virtual,mdio-gpio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-0 = <&mdio0_pins>;
-			pinctrl-names = "default";
-
-
-			phy0: ethernet-phy@0 {
-				device_type = "ethernet-phy";
-				reg = <0>;
-				qca,ar8327-initvals = <
-					0x00004 0x7600000   /* PAD0_MODE */
-					0x00008 0x1000000   /* PAD5_MODE */
-					0x0000c 0x80        /* PAD6_MODE */
-					0x000e4 0xaa545     /* MAC_POWER_SEL */
-					0x000e0 0xc74164de  /* SGMII_CTRL */
-					0x0007c 0x4e        /* PORT0_STATUS */
-					0x00094 0x4e        /* PORT6_STATUS */
-					0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
-					0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
-					0x00978 0x19008643  /* QM_PORT1_CTRL0 */
-					0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
-					0x00980 0x19008643  /* QM_PORT2_CTRL0 */
-					0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
-					0x00988 0x19008643  /* QM_PORT3_CTRL0 */
-					0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
-					0x00990 0x19008643  /* QM_PORT4_CTRL0 */
-					0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
-					0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
-					0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
-					0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
-					0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
-					>;
-				qca,ar8327-vlans = <
-					0x1	0x5e	    /* VLAN1 Ports 1/2/3/4/6 */
-					0x2	0x21	    /* VLAN2 Ports 0/5 */
-				>;
-			};
-
-			phy4: ethernet-phy@4 {
-				device_type = "ethernet-phy";
-				reg = <4>;
-				qca,ar8327-initvals = <
-					0x000e4 0x6a545     /* MAC_POWER_SEL */
-					0x0000c 0x80        /* PAD6_MODE */
-					>;
-			};
-		};
-
-		gmac1: ethernet@37200000 {
-			status = "ok";
-			phy-mode = "rgmii";
-			qcom,id = <1>;
-			qcom,phy_mdio_addr = <4>;
-			qcom,poll_required = <0>;
-			qcom,rgmii_delay = <1>;
-			qcom,phy_mii_type = <0>;
-			qcom,emulation = <0>;
-			qcom,irq = <255>;
-			mdiobus = <&mdio0>;
-
-			pinctrl-0 = <&rgmii2_pins>;
-			pinctrl-names = "default";
-
-			mtd-mac-address = <&art 6>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		gmac2: ethernet@37400000 {
-			status = "ok";
-			phy-mode = "sgmii";
-			qcom,id = <2>;
-			qcom,phy_mdio_addr = <0>;	/* none */
-			qcom,poll_required = <0>;	/* no polling */
-			qcom,rgmii_delay = <0>;
-			qcom,phy_mii_type = <1>;
-			qcom,emulation = <0>;
-			qcom,irq = <258>;
-			mdiobus = <&mdio0>;
-
-			mtd-mac-address = <&art 0>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		rpm@108000 {
-			pinctrl-0 = <&i2c4_pins>;
-			pinctrl-names = "default";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		power_white: power_white {
-			label = "r7800:white:power";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		power_amber: power_amber {
-			label = "r7800:amber:power";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_white {
-			label = "r7800:white:wan";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_amber {
-			label = "r7800:amber:wan";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb1 {
-			label = "r7800:white:usb1";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb2 {
-			label = "r7800:white:usb2";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		esata {
-			label = "r7800:white:esata";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		wifi {
-			label = "r7800:white:wifi";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "r7800:white:wps";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&adm_dma {
-	status = "ok";
-};
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi
deleted file mode 100644
index 22b5338cc0..0000000000
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-#include "qcom-ipq8065.dtsi"
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
deleted file mode 100644
index b3ccb2ede2..0000000000
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ /dev/null
@@ -1,153 +0,0 @@
-#include "qcom-ipq8064.dtsi"
-
-/ {
-	model = "Qualcomm IPQ8065";
-	compatible = "qcom,ipq8065", "qcom,ipq8064";
-
-	qcom,pvs {
-		qcom,pvs-format-a;
-		qcom,speed0-pvs0-bin-v0 =
-			< 1725000000 1262500 >,
-			< 1400000000 1175000 >,
-			< 1000000000 1100000 >,
-			 < 800000000 1050000 >,
-			 < 600000000 1000000 >,
-			 < 384000000 975000 >;
-		qcom,speed0-pvs1-bin-v0 =
-			< 1725000000 1225000 >,
-			< 1400000000 1150000 >,
-			< 1000000000 1075000 >,
-			 < 800000000 1025000 >,
-			 < 600000000 975000 >,
-			 < 384000000 950000 >;
-		qcom,speed0-pvs2-bin-v0 =
-			< 1725000000 1200000 >,
-			< 1400000000 1125000 >,
-			< 1000000000 1050000 >,
-			 < 800000000 1000000 >,
-			 < 600000000 950000 >,
-			 < 384000000 925000 >;
-		qcom,speed0-pvs3-bin-v0 =
-			< 1725000000 1175000 >,
-			< 1400000000 1100000 >,
-			< 1000000000 1025000 >,
-			 < 800000000 975000 >,
-			 < 600000000 925000 >,
-			 < 384000000 900000 >;
-		qcom,speed0-pvs4-bin-v0 =
-			< 1725000000 1150000 >,
-			< 1400000000 1075000 >,
-			< 1000000000 1000000 >,
-			 < 800000000 950000 >,
-			 < 600000000 900000 >,
-			 < 384000000 875000 >;
-		qcom,speed0-pvs5-bin-v0 =
-			< 1725000000 1100000 >,
-			< 1400000000 1025000 >,
-			< 1000000000 950000 >,
-			 < 800000000 900000 >,
-			 < 600000000 850000 >,
-			 < 384000000 825000 >;
-		qcom,speed0-pvs6-bin-v0 =
-			< 1725000000 1050000 >,
-			< 1400000000 975000 >,
-			< 1000000000 900000 >,
-			 < 800000000 850000 >,
-			 < 600000000 800000 >,
-			 < 384000000 775000 >;
-	};
-
-	soc: soc {
-
-		rpm@108000 {
-
-			regulators {
-
-				smb208_s2a: s2a {
-					regulator-min-microvolt = <775000>;
-					regulator-max-microvolt = <1275000>;
-				};
-
-				smb208_s2b: s2b {
-					regulator-min-microvolt = <775000>;
-					regulator-max-microvolt = <1275000>;
-				};
-			};
-		};
-
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdcc1bam:dma@12402000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <0 98 0>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-                };
-
-		sdcc3bam:dma@12182000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <0 96 0>;
-			clocks = <&gcc SDC3_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		amba {
-			compatible = "arm,amba-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: sdcc@12400000 {
-				status          = "disabled";
-				compatible      = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg             = <0x12400000 0x2000>;
-				interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names     = "mclk", "apb_pclk";
-				bus-width       = <8>;
-				max-frequency   = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc3: sdcc@12180000 {
-				compatible      = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status          = "disabled";
-				reg             = <0x12180000 0x2000>;
-				interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names     = "mclk", "apb_pclk";
-				bus-width       = <8>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency   = <192000000>;
-				#mmc-ddr-1_8v;
-				sd-uhs-sdr104;
-				sd-uhs-ddr50;
-				vqmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
-		};
-	};
-};