ipq806x: drop partitial supported boards

There are only artifacts for these boards in our tree and not even
partial support.

Drop teh stale files.

Signed-off-by: Mathias Kresin <dev@kresin.me>

2 files changed, 0 insertions, 332 deletions

diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts
deleted file mode 100644
index a00dee7f27..0000000000
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts
+++ /dev/null
@@ -1,135 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019-ap.dk01.1.dtsi"
-#include "qcom-ipq4019-bus.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "ZyXEL NBG6617";
-	compatible = "zyxel,nbg6617", "qcom,ipq4019";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	reserved-memory {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-
-		rsvd1@87000000 {
-			reg = <0x87000000 0x0500000>;
-			no-map;
-		};
-
-		wifi_dump@87500000 {
-			reg = <0x87500000 0x600000>;
-			no-map;
-		};
-
-		rsvd2@87B00000 {
-			reg = <0x87b00000 0x500000>;
-			no-map;
-		};
-	};
-
-	soc {
-		pinctrl@1000000 {
-			led_pinmux {
-				mux {
-					pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
-					drive-strength = <0x8>;
-					bias-pull-up;
-					output-high;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		wlan {
-			label = "wlan";
-			gpios = <&tlmm 0x2 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 0x3f GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 0x4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power: power {
-			label = "nbg6617:green:power";
-			gpios = <&tlmm 0x3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "nbg6617:green:wps";
-			gpios = <&tlmm 0x1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2G {
-			label = "nbg6617:green:wlan2G";
-			gpios = <&tlmm 0x3a GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5G {
-			label = "nbg6617:green:wlan5G";
-			gpios = <&tlmm 0x5 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&spi_0 { /* BLSP1 QUP1 */
-	n25q128a11@0 {
-		status = "okay";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "all";
-				reg = <0x00000000 0x08000000>;
-				read-only; /* for now */
-			};
-		};
-	};
-};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts
deleted file mode 100644
index 6efd0df19b..0000000000
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts
+++ /dev/null
@@ -1,197 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019-ap.dk01.1.dtsi"
-#include "qcom-ipq4019-bus.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "ASUS RT-AC58U";
-	compatible = "asus,rt-ac58u", "qcom,ipq4019";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	reserved-memory {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-
-		rsvd1@87E00000 {
-			reg = <0x87e00000 0x200000>;
-			no-map;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power: status {
-			label = "rt-ac58u:blue:status";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan {
-			label = "rt-ac58u:blue:wan";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2G {
-			label = "rt-ac58u:blue:wlan2G";
-			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan5G {
-			label = "rt-ac58u:blue:wlan5G";
-			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb {
-			label = "rt-ac58u:blue:usb";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan {
-			label = "rt-ac58u:blue:lan";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&spi_0_pins {
-	pinmux_cs {
-		function = "gpio";
-		pins = "gpio54", "gpio59";
-	};
-	pinconf_cs {
-		pins = "gpio54", "gpio59";
-		drive-strength = <2>;
-		bias-disable;
-		output-high;
-	};
-};
-
-&spi_0 { /* BLSP1 QUP1 */
-	cs-gpios = <&tlmm 54 0>,
-		   <&tlmm 59 0>;
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		/*
-		 * U-boot looks for "n25q128a11" node,
-		 * if we don't have it, it will spit out the following warning:
-		 * "ipq: fdt fixup unable to find compatible node".
-		 */
-		compatible = "mx25l1606e", "n25q128a11";
-		reg = <0>;
-		linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "APPSBLENV"; /* uboot env*/
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition5@f0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-			partition5@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-			/* 0x00180000 - 0x00200000 unused */
-		};
-	};
-
-	mt29f@1 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "spinand,mt29f", "w25n01gv";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "ubi";
-				reg = <0x00000000 0x08000000>;
-			};
-		};
-	};
-};