imx: add initial version of 3.18 support

This is build tested only.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45125

6 files changed, 337 insertions, 0 deletions

diff --git a/target/linux/imx6/patches-3.18/100-bootargs.patch b/target/linux/imx6/patches-3.18/100-bootargs.patch
new file mode 100644
index 0000000000..0954391203
--- /dev/null
+++ b/target/linux/imx6/patches-3.18/100-bootargs.patch
@@ -0,0 +1,11 @@
+--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
++++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
+@@ -19,4 +19,8 @@
+ 	memory {
+ 		reg = <0x10000000 0x40000000>;
+ 	};
++
++	chosen {
++		bootargs = "console=ttymxc0,115200";
++	};
+ };
diff --git a/target/linux/imx6/patches-3.18/200-pci_designware_add-ability-for-custom-swizzle.patch b/target/linux/imx6/patches-3.18/200-pci_designware_add-ability-for-custom-swizzle.patch
new file mode 100644
index 0000000000..38e5123507
--- /dev/null
+++ b/target/linux/imx6/patches-3.18/200-pci_designware_add-ability-for-custom-swizzle.patch
@@ -0,0 +1,33 @@
+commit e84634dc6c7f3f6af9b8ef1fb36f0d85c476ab95
+Author: Tim Harvey <tharvey@gateworks.com>
+Date:   Thu Feb 27 01:02:23 2014 -0800
+
+    PCI: designware: add ability for custom swizzle
+    
+    Add the ability for a platform driver to provide a platform-specific
+    swizzle function.
+    
+    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+
+--- a/drivers/pci/host/pcie-designware.c
++++ b/drivers/pci/host/pcie-designware.c
+@@ -492,6 +492,9 @@ int __init dw_pcie_host_init(struct pcie
+ 	if (pp->ops->host_init)
+ 		pp->ops->host_init(pp);
+ 
++	if (pp->swizzle)
++		dw_pci.swizzle = pp->swizzle;
++
+ 	dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
+ 
+ 	/* program correct class for RC */
+--- a/drivers/pci/host/pcie-designware.h
++++ b/drivers/pci/host/pcie-designware.h
+@@ -53,6 +53,7 @@ struct pcie_port {
+ 	struct irq_domain	*irq_domain;
+ 	unsigned long		msi_data;
+ 	DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
++	u8			(*swizzle)(struct pci_dev *, u8 *);
+ };
+ 
+ struct pcie_host_ops {
diff --git a/target/linux/imx6/patches-3.18/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch b/target/linux/imx6/patches-3.18/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch
new file mode 100644
index 0000000000..4db1569d89
--- /dev/null
+++ b/target/linux/imx6/patches-3.18/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch
@@ -0,0 +1,81 @@
+commit 2c0d0491438433a1f327f2e754c7b6b55fec51c4
+Author: Tim Harvey <tharvey@gateworks.com>
+Date:   Thu Feb 27 00:59:53 2014 -0800
+
+    PCI: imx6: ventana: fixup for IRQ mismapping
+    
+    The TI XIO2001 PCIe-to-PCI bridge used on several Ventana expansion boards
+    has its slot-to-bridge IRQ mapping reversed from the PCI specification:
+    
+      INTA->INTD
+      INTB->INTC
+      INTC->INTB
+      INTD->INTA
+    
+    Implement a custom swizzle function that does a fixup on the interrupt for
+    devices on a TI XIO2001 bridge.
+    
+    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+
+--- a/drivers/pci/host/pci-imx6.c
++++ b/drivers/pci/host/pci-imx6.c
+@@ -553,6 +553,39 @@ static int __init imx6_add_pcie_port(str
+ 	return 0;
+ }
+ 
++/* TI XIO2001 PCIe-to-PCI bridge on GW16082 exp card has IRQs reversed */
++u8 ventana_swizzle(struct pci_dev *dev, u8 *pin)
++{
++	u8 i = 0;
++	struct pci_dev *pdev = dev;
++
++	/* count number of TI XIO2001 bridges on bus */
++	while (!pci_is_root_bus(pdev->bus)) {
++		if (pdev->bus && pdev->bus->self &&
++		    (pdev->bus->self->vendor == PCI_VENDOR_ID_TI) &&
++		    (pdev->bus->self->device == PCI_DEVICE_ID_TI_XIO2001)) {
++			i++;
++		}
++		pdev = pdev->bus->self;
++	}
++	while (!pci_is_root_bus(dev->bus)) {
++		/* if we are directly downstream from 1st TI XIO2001 bridge */
++		if (dev->bus && dev->bus->self &&
++		    (dev->bus->self->vendor == PCI_VENDOR_ID_TI) &&
++		    (dev->bus->self->device == PCI_DEVICE_ID_TI_XIO2001)) {
++			if (--i == 0) {
++				/* swap IRQs and swizzle backwards */
++				*pin = (15 - PCI_SLOT(dev->devfn)) + 1;
++				dev = dev->bus->self;
++				continue;
++			}
++		}
++		*pin = pci_swizzle_interrupt_pin(dev, *pin);
++		dev = dev->bus->self;
++	}
++	return PCI_SLOT(dev->devfn);
++}
++
+ static int __init imx6_pcie_probe(struct platform_device *pdev)
+ {
+ 	struct imx6_pcie *imx6_pcie;
+@@ -618,6 +651,9 @@ static int __init imx6_pcie_probe(struct
+ 		return PTR_ERR(imx6_pcie->iomuxc_gpr);
+ 	}
+ 
++	if (of_machine_is_compatible("gw,ventana"))
++		pp->swizzle = ventana_swizzle;
++
+ 	ret = imx6_add_pcie_port(pp, pdev);
+ 	if (ret < 0)
+ 		return ret;
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -827,6 +827,7 @@
+ #define PCI_DEVICE_ID_TI_XX12		0x8039
+ #define PCI_DEVICE_ID_TI_XX12_FM	0x803b
+ #define PCI_DEVICE_ID_TI_XIO2000A	0x8231
++#define PCI_DEVICE_ID_TI_XIO2001	0x8240
+ #define PCI_DEVICE_ID_TI_1130		0xac12
+ #define PCI_DEVICE_ID_TI_1031		0xac13
+ #define PCI_DEVICE_ID_TI_1131		0xac15
diff --git a/target/linux/imx6/patches-3.18/202-net-igb-add-i210-i211-support-for-phy-read-write.patch b/target/linux/imx6/patches-3.18/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
new file mode 100644
index 0000000000..fb4b722569
--- /dev/null
+++ b/target/linux/imx6/patches-3.18/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
@@ -0,0 +1,129 @@
+Author: Tim Harvey <tharvey@gateworks.com>
+Date:   Thu May 15 00:12:26 2014 -0700
+
+    net: igb: add i210/i211 support for phy read/write
+    
+    The i210/i211 uses the MDICNFG register for the phy address instead of the
+    MDIC register.
+    
+    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+
+--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
++++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
+@@ -135,7 +135,7 @@ out:
+ s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+ {
+ 	struct e1000_phy_info *phy = &hw->phy;
+-	u32 i, mdic = 0;
++	u32 i, mdicnfg, mdic = 0;
+ 	s32 ret_val = 0;
+ 
+ 	if (offset > MAX_PHY_REG_ADDRESS) {
+@@ -148,11 +148,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
+ 	 * Control register.  The MAC will take care of interfacing with the
+ 	 * PHY to retrieve the desired data.
+ 	 */
+-	mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+-		(phy->addr << E1000_MDIC_PHY_SHIFT) |
+-		(E1000_MDIC_OP_READ));
++	switch (hw->mac.type) {
++	case e1000_i210:
++	case e1000_i211:
++		mdicnfg = rd32(E1000_MDICNFG);
++		mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++		mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++		wr32(E1000_MDICNFG, mdicnfg);
++		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
++			(E1000_MDIC_OP_READ));
++		break;
++	default:
++		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
++			(phy->addr << E1000_MDIC_PHY_SHIFT) |
++			(E1000_MDIC_OP_READ));
++		break;
++	}
+ 
+ 	wr32(E1000_MDIC, mdic);
++	wrfl();
+ 
+ 	/* Poll the ready bit to see if the MDI read completed
+ 	 * Increasing the time out as testing showed failures with
+@@ -177,6 +191,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
+ 	*data = (u16) mdic;
+ 
+ out:
++	switch (hw->mac.type) {
++		/* restore MDICNFG to have phy's addr */
++		case e1000_i210:
++		case e1000_i211:
++			mdicnfg = rd32(E1000_MDICNFG);
++			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++			mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
++			wr32(E1000_MDICNFG, mdicnfg);
++			break;
++		default:
++			break;
++	}
+ 	return ret_val;
+ }
+ 
+@@ -191,7 +217,7 @@ out:
+ s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+ {
+ 	struct e1000_phy_info *phy = &hw->phy;
+-	u32 i, mdic = 0;
++	u32 i, mdicnfg, mdic = 0;
+ 	s32 ret_val = 0;
+ 
+ 	if (offset > MAX_PHY_REG_ADDRESS) {
+@@ -204,12 +230,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
+ 	 * Control register.  The MAC will take care of interfacing with the
+ 	 * PHY to retrieve the desired data.
+ 	 */
+-	mdic = (((u32)data) |
+-		(offset << E1000_MDIC_REG_SHIFT) |
+-		(phy->addr << E1000_MDIC_PHY_SHIFT) |
+-		(E1000_MDIC_OP_WRITE));
++	switch (hw->mac.type) {
++		case e1000_i210:
++		case e1000_i211:
++			mdicnfg = rd32(E1000_MDICNFG);
++			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++			mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++			wr32(E1000_MDICNFG, mdicnfg);
++			mdic = (((u32)data) |
++				(offset << E1000_MDIC_REG_SHIFT) |
++				(E1000_MDIC_OP_WRITE));
++			break;
++		default:
++			mdic = (((u32)data) |
++				(offset << E1000_MDIC_REG_SHIFT) |
++				(phy->addr << E1000_MDIC_PHY_SHIFT) |
++				(E1000_MDIC_OP_WRITE));
++			break;
++	}
+ 
+ 	wr32(E1000_MDIC, mdic);
++	wrfl();
+ 
+ 	/* Poll the ready bit to see if the MDI read completed
+ 	 * Increasing the time out as testing showed failures with
+@@ -233,6 +274,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
+ 	}
+ 
+ out:
++	switch (hw->mac.type) {
++		/* restore MDICNFG to have phy's addr */
++		case e1000_i210:
++		case e1000_i211:
++			mdicnfg = rd32(E1000_MDICNFG);
++			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++			mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
++			wr32(E1000_MDICNFG, mdicnfg);
++			break;
++		default:
++			break;
++	}
+ 	return ret_val;
+ }
+ 
diff --git a/target/linux/imx6/patches-3.18/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch b/target/linux/imx6/patches-3.18/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
new file mode 100644
index 0000000000..e991fad51c
--- /dev/null
+++ b/target/linux/imx6/patches-3.18/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
@@ -0,0 +1,27 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -292,6 +292,14 @@ endif # RTL8366_SMI
+ 
+ source "drivers/net/phy/b53/Kconfig"
+ 
++config GATEWORKS_GW16083
++	tristate "Gateworks GW16083 Ethernet Expansion Mezzanine"
++	---help---
++	  The Gateworks GW16083 Ethernet Expansion Mezzanine connects to a
++	  Gateworks Ventana baseboard and provides a 7-port GbE managed
++	  Ethernet switch with 4 dedicated GbE RJ45 ports, and 2 Gbe/SFP
++	  ports"
++
+ endif # PHYLIB
+ 
+ config MICREL_KS8995MA
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -40,6 +40,7 @@ obj-$(CONFIG_NATIONAL_PHY)	+= national.o
+ obj-$(CONFIG_DP83640_PHY)	+= dp83640.o
+ obj-$(CONFIG_STE10XP)		+= ste10Xp.o
+ obj-$(CONFIG_MICREL_PHY)	+= micrel.o
++obj-$(CONFIG_GATEWORKS_GW16083)	+= gw16083.o
+ obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
+ obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
+ obj-$(CONFIG_AT803X_PHY)	+= at803x.o
diff --git a/target/linux/imx6/patches-3.18/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch b/target/linux/imx6/patches-3.18/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
new file mode 100644
index 0000000000..6f31f956de
--- /dev/null
+++ b/target/linux/imx6/patches-3.18/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
@@ -0,0 +1,56 @@
+--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+@@ -89,6 +89,11 @@
+ 			enable-active-high;
+ 		};
+ 	};
++
++	gw16083: gw16083@52 {
++		compatible = "gateworks,gw16083";
++		reg = <0x52>;
++	};
+ };
+ 
+ &fec {
+--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+@@ -266,6 +266,11 @@
+ 			};
+ 		};
+ 	};
++
++	gw16083: gw16083@52 {
++		compatible = "gateworks,gw16083";
++		reg = <0x52>;
++	};
+ };
+ 
+ &pcie {
+--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+@@ -267,6 +267,11 @@
+ 			};
+ 		};
+ 	};
++
++	gw16083: gw16083@52 {
++		compatible = "gateworks,gw16083";
++		reg = <0x52>;
++	};
+ };
+ 
+ &pcie {
+--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+@@ -308,6 +308,11 @@
+ 			};
+ 		};
+ 	};
++
++	gw16083: gw16083@52 {
++		compatible = "gateworks,gw16083";
++		reg = <0x52>;
++	};
+ };
+ 
+ &i2c3 {