kernel: Copy patches from kernel 4.14 to 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 142 insertions, 0 deletions

diff --git a/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch
new file mode 100644
index 0000000000..27bbf572e9
--- /dev/null
+++ b/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch
@@ -0,0 +1,142 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: net: phy: allow to configure AR803x PHYs via platform data
+
+Add a patch for the at803x phy driver, in order to be able
+to configure some register settings via platform data.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/phy/at803x.c                 | 56 ++++++++++++++++++++++++++++++++
+ include/linux/platform_data/phy-at803x.h | 11 +++++++
+ 2 files changed, 67 insertions(+)
+ create mode 100644 include/linux/platform_data/phy-at803x.h
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -12,12 +12,14 @@
+  */
+ 
+ #include <linux/phy.h>
++#include <linux/mdio.h>
+ #include <linux/module.h>
+ #include <linux/string.h>
+ #include <linux/netdevice.h>
+ #include <linux/etherdevice.h>
+ #include <linux/of_gpio.h>
+ #include <linux/gpio/consumer.h>
++#include <linux/platform_data/phy-at803x.h>
+ 
+ #define AT803X_INTR_ENABLE			0x12
+ #define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
+@@ -45,6 +47,11 @@
+ #define AT803X_REG_CHIP_CONFIG			0x1f
+ #define AT803X_BT_BX_REG_SEL			0x8000
+ 
++#define AT803X_PCS_SMART_EEE_CTRL3			0x805D
++#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
++#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT	12
++#define AT803X_SMART_EEE_CTRL3_LPI_EN			BIT(8)
++
+ #define AT803X_DEBUG_ADDR			0x1D
+ #define AT803X_DEBUG_DATA			0x1E
+ 
+@@ -74,6 +81,7 @@ MODULE_LICENSE("GPL");
+ struct at803x_priv {
+ 	bool phy_reset:1;
+ 	struct gpio_desc *gpiod_reset;
++	int prev_speed;
+ };
+ 
+ struct at803x_context {
+@@ -274,8 +282,16 @@ does_not_require_reset_workaround:
+ 	return 0;
+ }
+ 
++static void at803x_disable_smarteee(struct phy_device *phydev)
++{
++	phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
++		1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
++	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
++}
++
+ static int at803x_config_init(struct phy_device *phydev)
+ {
++	struct at803x_platform_data *pdata;
+ 	int ret;
+ 
+ 	ret = genphy_config_init(phydev);
+@@ -296,6 +312,26 @@ static int at803x_config_init(struct phy
+ 			return ret;
+ 	}
+ 
++	pdata = dev_get_platdata(&phydev->mdio.dev);
++	if (pdata) {
++		if (pdata->disable_smarteee)
++			at803x_disable_smarteee(phydev);
++
++		if (pdata->enable_rgmii_rx_delay)
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
++				AT803X_DEBUG_RX_CLK_DLY_EN);
++		else
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
++				AT803X_DEBUG_RX_CLK_DLY_EN, 0);
++
++		if (pdata->enable_rgmii_tx_delay)
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
++				AT803X_DEBUG_TX_CLK_DLY_EN);
++		else
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
++				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
++	}
++
+ 	return 0;
+ }
+ 
+@@ -333,6 +369,8 @@ static int at803x_config_intr(struct phy
+ static void at803x_link_change_notify(struct phy_device *phydev)
+ {
+ 	struct at803x_priv *priv = phydev->priv;
++	struct at803x_platform_data *pdata;
++	pdata = dev_get_platdata(&phydev->mdio.dev);
+ 
+ 	/*
+ 	 * Conduct a hardware reset for AT8030/2 every time a link loss is
+@@ -361,6 +399,24 @@ static void at803x_link_change_notify(st
+ 	} else {
+ 		priv->phy_reset = false;
+ 	}
++	if (pdata && pdata->fixup_rgmii_tx_delay &&
++	    phydev->speed != priv->prev_speed) {
++		switch (phydev->speed) {
++		case SPEED_10:
++		case SPEED_100:
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
++				AT803X_DEBUG_TX_CLK_DLY_EN);
++			break;
++		case SPEED_1000:
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
++				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
++			break;
++		default:
++			break;
++		}
++
++		priv->prev_speed = phydev->speed;
++	}
+ }
+ 
+ static int at803x_aneg_done(struct phy_device *phydev)
+--- /dev/null
++++ b/include/linux/platform_data/phy-at803x.h
+@@ -0,0 +1,11 @@
++#ifndef _PHY_AT803X_PDATA_H
++#define _PHY_AT803X_PDATA_H
++
++struct at803x_platform_data {
++	int disable_smarteee:1;
++	int enable_rgmii_tx_delay:1;
++	int enable_rgmii_rx_delay:1;
++	int fixup_rgmii_tx_delay:1;
++};
++
++#endif /* _PHY_AT803X_PDATA_H */