diff options
| author | Roman Yeryomin <roman@advem.lv> | 2018-05-04 18:18:51 +0300 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-05-05 06:57:00 +0200 |
| commit | ce93b05bf1465b240366000f833e413c0b916125 (patch) | |
| tree | dc739624fdf38918ab6ddde9f9bd66205fc20ceb /target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch | |
| parent | 2c35bcffd080abaf1262d0afd905b04ea8696829 (diff) | |
| download | upstream-ce93b05bf1465b240366000f833e413c0b916125.tar.gz upstream-ce93b05bf1465b240366000f833e413c0b916125.tar.bz2 upstream-ce93b05bf1465b240366000f833e413c0b916125.zip | |
gemini: fix hard disk boot on D-Link devices
Since the D-Link devices boot from hard disk we need to
add the following changes to Gemini:
- Supply a bootarg in the device tree so we can boot from
the right partition (/dev/sda4 on DNS-313)
- Disable forced command line in config so the kernel picks
up the right bootargs from the device tree
- Enable EXT4 in the config as this is used for rootfs else
we get nowhere, we cannot load this as a module because,
well, it is supposed to be loaded from the root partition
(chicken and egg problem).
- Enable jbd2 and mbcache (needed by ext4)
Also clean out the premature attempts to dynamically
modify the command line in the Image makefile: we should
pass this with the device tree bootargs instead, it works
much better.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Diffstat (limited to 'target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch')
| -rw-r--r-- | target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch b/target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch new file mode 100644 index 0000000000..f8cf123d7b --- /dev/null +++ b/target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch @@ -0,0 +1,45 @@ +From 5813b729eb9fe91fcf895a5c2f30bf34fbd46379 Mon Sep 17 00:00:00 2001 +From: Linus Walleij <linus.walleij@linaro.org> +Date: Wed, 2 May 2018 09:17:25 +0200 +Subject: [PATCH] ARM: dts: Fix bootargs for Gemini D-Link devices + +These machines need to be booted from very specific harddisk +partitions (as the D-Link DNS-313 boots specifically from +partition 4). Add the proper bootargs so that everything works +smoothly. + +Signed-off-by: Linus Walleij <linus.walleij@linaro.org> +--- + arch/arm/boot/dts/gemini-dlink-dir-685.dts | 3 ++- + arch/arm/boot/dts/gemini-dlink-dns-313.dts | 1 + + 2 files changed, 3 insertions(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts +index a39914dece98..840f4a32f37c 100644 +--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts ++++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts +@@ -20,7 +20,8 @@ + }; + + chosen { +- stdout-path = "uart0:115200n8"; ++ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; ++ stdout-path = "uart0:19200n8"; + }; + + gpio_keys { +diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts +index 4904f1251671..685719a0b8c0 100644 +--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts ++++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts +@@ -26,6 +26,7 @@ + }; + + chosen { ++ bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait"; + stdout-path = "uart0:19200n8"; + }; + +-- +2.14.3 + |